Responsibilities

1. Technical oversight and issue resolution

2. Safety and quality management

3. Project administration and progress monitoring

4. Stakeholder management and coordination

5. Reporting and compliance

Key Skills:

1. Technical knowledge

2. Communication and coordination

3. Analytical and problem-solving

4. Safety and quality management

5. Stakeholder management

Qualifications & Experience

1. 8+ years of experience in civil & structural engineering

2. Relevant experience in deep excavation, foundation, tunnel, and building works

3. Recognized Civil & Structural Engineering degree (PEB Singapore)

4. Accredited by JAC (IES/ACES)

5. Proficient in PSSCOC contract administration

6. Strong leadership, supervision, and interpersonal skills

7. Commitment to safety and health

8. Familiarity with statutory codes, quality control, and construction administration

Desired Qualities:

1. Proven track record in leading supervision teams

2. Excellent organizational skills

3. Strong communication and interpersonal skills

4. Ability to manage teams and ensure personnel welfare

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to optimize the spray drying processes for collagen and gelatine powder production, ensuring high-quality and consistent output.

Key Responsibilities

• Manage research project with Principal Investigator (PI), Co-PI and team members to ensure all project deliverables are met
• Participate in brainstorming and ideation, conduct research and experiments, create functional models, and maintain documentation of design development
• Develop system from embodiment of concept to detailed design of parts and assemblies, including selection of standard components, through application studies, analyses and calculations
• Organise procurement of required electrical and mechanical components as well as commercial devices
• Guide students to carry out assembly of submodules, integration of system and testing of machines
• Coordinate maintenance of associated equipment with POD technical officers when required
• Perform risk assessment, and ensure compliance with workplace safety and health regulations

Job Requirements

• Bachelor's degree or higher in mechanical engineering, or related field.
• Professional-level competency in mechanical system and part design
• Strong prototyping skills
• Proficiency in CAD software, such as SolidWorks or Creo Parametric
• Mechanical engineering degree
• Minimum design experience of 5 years

Key Competencies

• Show strong initiative and take ownership of work.
• Demonstrates expertise in experimental design and execution, with good analytical thinking and problem-solving skills.
• Able to build and maintain strong working relationships with people within and external to the university.
• Good communication and interpersonal skills.

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. cynapse’s software platform is leveraging cutting-edge cloud/on-premise/edge platforms, advanced computer vision algorithms, advanced ML concepts & models, and more.

The company Headquarter is located in Singapore (one-north Area)

Job Description

Cynapse is looking for a talented and highly motivated Computer Vision & Machine Learning Developer to join our AI team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of design and coding, working in a cutting-edge, dynamic and professionally challenging environment.

Responsibilities

• Develop advanced video/image analytics technologies using both Computer Vision Algorithms and advanced ML/DNN
• Research technologies and concepts in the areas of Machine Learning, Computer Vision and Edge AI
• Participate in system design activities, prototyping and testing
• Follow and contribute to software development best practices

Qualifications

• At least a Bachelor’s Degree in Data Science, Computer Science, Engineering or similar
• Experience in developing Computer Vision applications, i.e. object detection & classification, object segmentation, computer vision algorithms, ML models optimization, etc.
• Experience with ML/DNN in at least one of the following frameworks: TensorRT, Tensorflow, Keras, PyTorch
• At least 2 years of experience with C++

Personal Competencies

• Innovative, motivated and a quick learner
• Ability to work well in a small team and take end-to-end ownership of problems and their resolution
• Attention to detail, curiosity, and passion for technology

Benefits

• Competitive base salary and a generous stock option package
• Unique opportunity to work with a talented global team on cutting edge technologies
• informal and exciting work environment with flexible hours

Due to the nature of the role, the position is considered for candidates that are only based in Singapore

Job Type: Full-time

Pay: $4,500.00 - $7,000.00 per month

Benefits:

• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary

Experience:

• Computer vision: 3 years (Required)

Work Location: In person

What you will do

1. DFT architecture exploration & evaluation for next-gen process node & package technology of MediaTek:

• Scan chain insertion & ATPG pattern generation
• Pattern validation through simulation & silicon analysis(pass/fail, shmoo, fail log, etc.)
• Diagnosis to help manufacture process improvement

2. Co-work with SoC architect, RTL designer, physical design engineer, and package engineer to define best architecture for 3D-IC:

• PPA(Performance/Power/Area) impact analysis & mitigation via DFT innovation
• Develop & integrate DFT-related RTL design modules to test chip

What you will bring

1. Master's Degree in EEE/ EE/ CE
2. Expertise in Synopsys and/or Mentor DFT tools, and HDL simulators like Synopsys VCS
3. Fluency in script language including but not limited to TCL/Perl/Python
4. Experience about MBIST with state-of-the-art SRAM structure & EDA tools is big plus
5. Skill for RTL design & integration, and physical failure analysis(PFA) will also be plus
6. Ability to think and work independently with different teams
7. Interest in understanding more details in entire design flow
8. Ability to use English for discussing technical details
9. With a minimum of 7 years relevant industrial work experience

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Responsibilities

· Responsible for creation/ modification/ improvement of work instructions based on feedback from stakeholder(s).

· Responsible for building on medical robot/ controller unit/ cart.

· Ensure production quality and consistency.

· Provide feedback to development team on product improvement base on production flow.

· Maintain production documents.

· Analyze production process and propose production improvement plan.

· Troubleshoot production discrepancy/ variance.

· Conduct in-process verification on modular and system level.

· Program controller units

Competency Requirements

· Responsible for creation/ modification/ improvement of work instructions based on feedback from stakeholder(s).

· Responsible for building on medical robot/ controller unit/ cart.

· Ensure production quality and consistency.

· Provide feedback to development team on product improvement base on production flow.

· Maintain production documents.

· Analyze production process and propose production improvement plan.

· Troubleshoot production discrepancy/ variance.

· Conduct in-process verification on modular and system level.

· Program controller units

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 3 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

Responsibilities:

• Collaborate with the presales team to conduct site surveys and assessments. This involves evaluating the customer's location, infrastructure, and specific requirements to determine the ideal setup and deployment for the robot.
• Responsible for setting up, commissioning the robot on-site and ensuring the robot is ready for operation.
• Perform thorough testing, identify and troubleshoot errors/failures and implement appropriate solutions to resolve the issues promptly.
• Handle repairs and maintenance tasks for the robot. This involves conducting regular maintenance activities as per the SOP/guidelines and addressing any breakdowns or equipment failures.
• Travel to customer sites, both local and international (whenever necessary), to provide on-site support, conduct setup/commissioning, perform maintenance tasks, and resolve technical issues at short notice to provide support or address urgent issues. Additionally, you should be willing to adapt to the customer's work environment and schedule, which may include night shifts and public holidays when necessary.
• Responsible for documenting service and fault reports. This includes accurately recording the details of the service provided, issues encountered, and the actions taken to resolve them. These reports are typically submitted to superiors and key individuals within the organization for review and analysis.
• Maintain detailed records of all tasks related to customer service. This includes maintaining customer service logs, updating internal service records, and ensuring all documentation is completed in a timely manner.
• Train customers and end-users on the proper handling, maintenance, and safety procedures of robot operation. Create and update documentation, including user manuals and service guides, to facilitate knowledge transfer and enhance support processes.

Requirements:

• Minimum Diploma in Engineering or other related fields
• 2 years of experience in servicing electronic and mechanical equipment / machines.
• Experience with troubleshooting and debugging hardware, electronics, and software.
• Excellent problem-solving skills and the ability to work under pressure in fast-paced environments.
• Effective communication skills with the ability to explain complex technical concepts to both technical and non-technical stakeholders.
• Strong communication skills in English (both oral and written)
• Tools: Basic knowledge on handling mechanical, electrical and electronic tools.
• Able to perform simple network configuration.
• Able to work independently and as part of a harmonious and effective team.
• Able to communicate well and tactfully with customers/distributors.

Responsibilities

· Design, testing and qualify PCBA/ module in accordance with design specification

· Work closely with peers, such as software, firmware, and mechanical engineering, to design a medical robot.

· Develop and maintain design documentation, including requirements, design documents, and test plans.

· Ensure compliance with relevant industry standards and regulations, such as FDA and ISO standards.

· Collaborate with other functional teams (mechanical design, process, software, manufacturing, and purchasing, etc.) to achieve project goals.

· Produce engineering outputs (BOM, CAD, WI etc.) for manufacturing of products.

· Navigate regulatory testing for Electrical Safety, Functional Safety, Radiated/ Conductor Emission & Immunity.

· Collaborate with product management and stakeholders to identify and prioritize new features and functionality for the robot.

Competency Requirements

· Master’s/ bachelor’s degree in electrical/ Electronic Engineering or other relevant discipline

· >5 years’ experience in product design and development, fresh graduates with keen interest in electrical design are welcome to apply.

· Strong working knowledge with microcontrollers, digital and analog circuitry design

· Strong working knowledge of firmware development

· Strong working experience in CAD software and PCB layout are preferred.

· Strong hands-on skills in debugging/ troubleshooting/ design verification are required.

· Able to work with other discipline to

· Able to provide guidance to junior engineers on development of product.

· Able to work independently, self-motivated and collaborate with peers in design team to design a product in accordance with specification.

· Experience in regulatory test is welcome.

The Snr Systems Engineer manages the systems administration function and leads the organisation's system projects and environments. He/She focuses on setting goals and priorities and on mentoring and coordination as well as providing technical leadership. He/She plans and oversees systems upgrades and migrations and ensures systems are up-to-date with the latest patches and are coherent across the organisation. He/She directs the development and maintenance of technical documentation.

He/She possesses strong leadership and communication abilities, and is able to set realistic goals and implement appropriate plans to guide the team toward achieving those goals. He/She is able to address multi-faceted issues effectively and in a collaborative manner including across departments. Set system administration processes

Role and Responsibilities:

Set system administration processes

• Establish goals and priorities, design, planning, day-to-day operation, maintenance, and advanced troubleshooting of systems

• Align system administration with overall strategic IT service direction and business needs

• Assist with the development of business case justifications and cost/benefit analyses for spending and initiatives

• Anticipate internal and/or external business challenges and/or regulatory issues

• Develop policies, procedures, and controls to ensure system security

Develop New Systems

• Partner with stakeholders to recommend innovative and automated approaches for system administration

• Define systems requirements for new technology implementations

• Prepare for system expansion by studying plans and requirements

• Oversee the design, maintenance and implementation of the systems

• Prioritise tasks to ensure projects are implemented in accordance with project plans and budgets

Optimise Systems Performance

• Recommend process, product or service improvements, resource optimisation and cost savings

• Oversee hardware and software upgrades

• Recommend new technologies, methodologies, systems or opportunities for cost savings, security and service quality improvement

Manage Teams

• Oversee team management including budgets, forecasting, work allocations and staffing

• Develop staff through ongoing coaching, mentoring and career discussions

• Define common goals, direction and accountability among staff

• Drive effective performance management practices within department in accordance with company policies and procedures

Requirements / Qualifications

• Degree in Information Technology or related

• Candidates must have at least 6 years of hands-on experience in Linux with ability to work with the project team in implementation projects as well as perform system administration activities for Linux systems. Knowledge in SAP will be advantageous but not required.

• At least 6 - 8 years’ experience in developing, implementing and maintaining IT systems

As a Senior Piping Engineer, he/she shall act as key person of the project as designated by Piping Department Manager and Lead Piping Engineer and performs the function inherent to this position. Responsible for the preparation of major piping layout, MTO sketch, and 3D CAD model review on piping system, equipment and structure, and interference detection. Has the technical responsibility for interpreting and evaluating stress/ vibration result, for reviewing piping layout, and piping information. He/She will also be responsible for reviewing piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, for providing technical guidance, and for organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

Duties and Responsibilities:

• To study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.
• To assist in planning and organizing piping engineering activities and manpower requirement for the project.
• To assist in developing piping engineering and design schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.
• To coordinate piping design and engineering effort with other area Lead Engineers and disciplines of the project as directed by Piping Design Supervisor.
• To prepare piping information list and layout and document list following standard procedure created for the project.
• To prepare piping general specification inclusive of specification for piping arrangement, piping support standards.
• To interpret and evaluate stress/vibration analysis result and provides necessary recommendation on resolving the method of analysis.
• To develop conceptual routing, piping layout and piping information of major critical equipment of the project such as tower/column, airfin coolers, heaters, compressors and reactors, preferably in 3D CAD format.
• To check and review all work such as piping layout and information prepared by Engineers, 3D model, MTO, BQ and other deliverables of the project for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To provide field engineering support/advice towards piping installation and testing at construction site.
• To perform the function inherent to Piping Key Person as designated by Piping Department Manager and Lead Piping Engineer.
• To evaluate the performance of and provide counseling and guidance to members of the project.
• To prepare lesson learned upon completion of the project and recommend preventive actions to avoid recurrence on future projects to Piping Design Supervisor.
• To perform other tasks that may be assigned by the Department Manager and Lead Piping Engineer.
• To carry out engineering support work during the construction phase of the project.

Requirements:

Education:

• Bachelor degree of any four years BS Engineering course preferably Mechanical Engineering or at least ten (10) years related experience and/or training; or equivalent combination of education and experience.
• Minimum of eight (8) years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support, three (3) years of which in a supervisory capacity.

Skill Requirements:

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Good Knowledge of AutoCAD.
• Good knowledge of SP3D.
• Basic knowledge of 3D Model review through Naviswork or SPR.
• Interpretation of stress/vibration analysis report.
• Ability to read, analyze, and interpret common technical information, contracts reports and instructions.
• Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communications.
• Strong leadership qualities and analytical and reasoning abilities.
• Good interpersonal and communication.

Assist with infrastructure planning and design

• Assist with the planning and design of infrastructure systems
• Assist with the documentation of infrastructure design and planning activities and decisions

Support infrastructure operations

• Perform infrastructure operations activities such as installations of infrastructure systems according to design specifications
• Align infrastructure operations with agreed service agreement standards

Maintain infrastructure

• Perform activities related to ongoing maintenance of infrastructure
• Assist with the implementation of agreed infrastructure changes and maintenance routines

Optimise infrastructure performance

• Perform ongoing tuning and optimisation of infrastructure hardware and software components such as updates and upgrades
• Participate in infrastructure development activities
• Assist with infrastructure testing and implementation
• Gather performance and data usage statistics for capacity planning and reporting
• Assist with piloting of new tools, technologies, and/or processes

Resolve incidents

• Perform problem/issue identification and resolution
• Assist with simulation of user problems to resolve operating difficulties
• Follow up with users to ensure problem has been resolved
• Recommend system modifications to reduce user problems

Requirements

• At least 6 years' of experience in the Network Management and Support Services, Unified Communication, Wirecenter maintenance
• Strong knowledge and experience in supporting Cisco Switch, Cisco Router, Fortigate Firewall, Palo Alto Firewall, ClearPass NAC, F5 VPN, IPS, WLC, Access Point and VSS/VLAN Architectures.
• Network Support in the areas of wireless, wired, VPN
• Network certifications eg CCNE, CCNA

Senior Project Engineer

Responsibilities:

• Lead a team of Engineers and Technicians for the execution of I&C System, SCADA, Industrial Automation, BMS system or ELV system
• Work with team to prepare, review, and submit all the related samples, catalogues, method of statement, risk assessments, panel layout details, design/shop drawings, Operational & Maintenance manual, As-built drawings, and etc for consultants and clients review and approval
• Work closely with team to control and monitor the execution of the projects to ensure that the projects meet the planned schedule, quality and cost requirement
• Communicate and coordinate with all the related stakeholders including internal teams, clients and contractors during the execution of the projects
• Manage site installation and site commissioning
• Manage and oversee the Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) in accordance to the clients' requirements
• Troubleshoot and resolve any issue arise during the deployment of the control system
• Prepare and submit the progress claims with all the necessary supporting documents to clients for payment clarification
• Any other duties as assigned by manager

Requirements:

• At least a Degree in Electrical, Electronics or Instrumentation & Control related discipline
• At least 5 years project management working experience related to I&C System, SCADA, Industrial Automation, BMS system or ELV system
• Good knowledge on basic electrical design & control system design philosophy
• Able to work effectively in a multidisciplinary environment
• Possess Class 2 or 3 driving license with own vehicle will be an advantage

Duties & Responsibilities:

Principal

• Occasionally establishes and prepares basis of design and/or estimation and design philosophy and requirements prior to execution of electrical detailed engineering works.
• Occasionally performs electrical system studies including value engineering to determine most cost-effective design but still conforms to Client requirements.
• Normally prepares key electrical engineering documents like Key Single Line Diagrams, Conceptual Layouts, Substation Layouts and, system diagrams for Fire Alarm and Communication Systems in accordance with Client and Project requirements to facilitate the execution of electrical detailed engineering works.
• Normally prepares specifications, data sheets, requisitions, technical evaluation reports and vendor data review of major substation electrical equipment in accordance with Client and project requirements and applicable codes and standards.
• Normally establishes estimation basis and prepares technical proposals for proposal projects in accordance with Client requirements and acceptable estimation and engineering practices.
• Normally coordinates with other discipline, vendors and/or sub-contractors to ensure conformity with project and Client requirements.
• Normally acts as KP of medium to large sized standard projects, exceeding 5,000 electrical engineering manhours.
• Perform discipline project control (schedule, BM/BQ & manhour) when assigned as Project Lead Engineer.
• Assists in implementation of Department training programs by functioning as a “trainer” or "mentor".
• Supports major phase of construction work, can assume responsibility as the Electrical Site Superintendent, Electrical QA/QC in charge, and Lead Field Engineer.
• Acts as the home base Lead Support Engineer when the major phase of the project has been shifted to site, such as purchasing of additional major equipment / material, coordinate / expedite vendors for the immediate supply of material exceptions, resolving major engineering conflicts within the approved specifications.
• Participates in site survey/ investigation of existing facilities to clarify feasibility of the design
• Participate in factory acceptance tests of electrical equipment to confirm suitability of equipment and ensure that the equipment is manufactured according to the agreed specifications.
• Performs other functions that may be assigned by superiors.

Competencies / Preferred Skills:

• Proficient in Microsoft Office Skills, AutoCAD and/or Microstation and common electrical calculation software.
• Familiar with local and international electrical codes, standards and regulations.
• Proficient in the design of electrical systems for oil/petroleum/industrial infrastructure industries.
• Familiar with ETAP and e-DPP software.
• Proficient in substation energization work.

Education Qualifications and other Requirements:

• Bachelor’s degree in Electrical Engineering.
• 15 years and above experience in electrical detailed engineering works of Oil & Gas, petrochemical and other related industrial plants, including five (5) or more years in frontend engineering and proposal / estimation works and additional five (5) or more years infield engineering works.

Duty and responsibility

• Plan, organize and ensure the First Article, Incoming QC, In-Process QC; Final-QC activities are performed efficiently and effectively.
• Supervise and lead a team of QC Leaders/Specialist/Inspectors.
• Establish, review quality control plans, standard operating procedures to ensure products and processes conform with customer specifications
• Work with cross functional departments to ensure product quality and system requirements are realized.
• Liaise with suppliers to improve their processes and resolve material/component related quality issues including RTV lots.
• Perform internal audit to warrant processes and procedures are well maintain and comply with ISO 9001, 13485 Standards and Regulatory requirements
• Lead in the investigation of product non-conformity, gather, analyse data to determine root cause and implement corrective/preventive action to prevent recurrence.

Requirement

• 5 years’ experience in QA functions, preferably in the medical device/plastic moulding manufacturing.
• Good knowledgeable in statistical techniques, eg SPC, CPK, Gage R&R and FMEA.
• Well versed in measurement metrology eg, familiar with CMM, Smart-scope and the ability to interpret Engineering drawings and specifications.
• Computer literate with proficiency in Microsoft Office (Word, Excel, and Power Point).

Candidate is expected to carry out Test Board Maintenance activities (Visual inspection, testing, framing, rework, washing, drying, packing etc)

Candidate is also expected to identify issues by recognizing data trends and to be able to read diagram and information from circuit.

Candidate must be driven and able to work independently and systematically to maintain delivery of excellent services.

Basic mechanical, electrical and programming knowledge is preferred to facilitate troubleshooting and root cause analysis.

Responsibilities and Duties

• Repair and maintenance of Test Board

• Maintain max passing yield results

• Test Board Maintenance activities (Perform socket replacement and testing)

• Identify Issues

• Reporting of service activities

• Management of spare socket inventory

• Technical service on industrial chambers

Requirements

Service Engineer – Diploma in Engineering

Technical Specialist – Diploma in Engineering

1 - 2 Years Experience

Strong in hands-on, able to work independently with minimum supervision

Able to do soldering work on tiny component

Technical Specialist will assist Service Engineer in above duties. Diploma holders demonstrating good technical capabilities will be considered for Service Engineer

Able to do soldering work on tiny component

1. Plan, design and construction management of Mechanical services for all types of building projects.
2. Mechanical services include Air-conditioning & mechanical ventilation system, fire protection system, sanitary, plumbing, gas and swimming pool filtration systems.
3. Provide support in project management and contract administration for building engineering contracts.

About NSING:

As part of Nations Technologies Group, NSING was founded in 2018 in Singapore bringing high-performance semiconductor products and solutions to global semiconductor industry. Our products includes General and Secure MCU, Secure IC for TPM (Trusted Platform Module), Bluetooth Low Energy BLE and BMS (Battery Management System). When you join NSING, you will be part of a talented team in the Singapore R&D Center where we develop high performance MCU targeting for Industrial and Edge AI applications.

Your Role:

As a SoC Design Verification Engineer, you will be you would be part of a passionate team developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C co-simulation, to mixed-signal simulation and formal verification. You will be part of the Singapore team in developing high performance MCU chips.

• Develop detailed verification plans based on design specifications and architectural requirements.
• Create and maintain test benches for complex digital designs using System Verilog and UVM (Universal Verification Methodology).
• Write, debug, and execute test cases to verify functionality, performance, and power consumption of our SoC products.
• Collaborate with design engineers to identify, analyze, and resolve design issues.
• Conduct coverage analysis and drive verification closure to ensure all functional requirements are met.
• Mentor junior verification engineers, providing technical guidance and support.
• Continuously improve verification processes and methodologies to enhance efficiency and effectiveness.
• Participate in design and verification reviews, providing constructive feedback and recommendations.
• Stay updated with the latest industry trends and advancements in verification techniques and tools.

Your Skills and Experiences:

• Education：Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or a related field.
• Experience: 5 years+ prior industry experience of design verification including significant System Verilog and UVM usage.
• Technical skills:

-Deep knowledge of digital logic design, SOC architecture and microarchitecture

- Proficient in simulation-based verification methodologies and languages such as UVM and System Verilog

- Skilled in developing and maintaining test benches, test cases, and verification environments

- Experience across the full verification cycle from initial planning to final tape out

• Preferred skills:

- Knowledge of low-power design techniques and verification methodologies.

- Knowledge of hardware-software co-simulation mixed-signal verification techniques.

- Knowledge of gate level simulation methodologies.

Other Skills:

• Strong analytical and problem-solving skills, with a keen attention to detail.
• Excellent communication and teamwork skills, with the ability to collaborate effectively in a cross-functional environment.
• Flexibility and adaptability and demonstrates ability to manage multiple tasks and projects, prioritizing effectively to meet deadlines.

JOB DESCRIPTION

We are looking for highly-motivated and skilled programmers to join us in Biomed DAR (BII A*Star), to work on a new initiative in the development and deployment of software tools for data management support systems/biomedical data repository. Our work supports BMRC-wide research programmes and industry collaborations.

Successful candidates will work with a team of data scientists, data engineers and UI designers to program a web-application stack for automated data integrity checks, data curation, data annotation, and data imputation for structured data generated by research programmes. Successful candidates will have the opportunity to tap into a large pool of biomedical data from different disciplines and to interact with the companies/researchers to understand their real data needs.

JOB REQUIREMENT

· Minimum bachelor’s degree or diploma in the field of computer science, computer engineering, or other web programming intensive course. With expertise in at least one of the following areas: creating, maintaining, implementing APIs, front-end development, microservices architecture

· Possess minimum 2 - 3 years or more of relevant work experience.

· Ability to work independently to translate design templates and ideas into programs with efficient coding.

· Basic knowledge in data analytics and proficient in Python, Node.js, React, SQL

· Prior industry experience with engineering, financial services, healthcare is a plus.

· Able to deliver under tight schedule.

· Good team player with understanding of best practices and cybersecurity.

· Good interpersonal and communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION

We are looking for highly-motivated and skilled programmers to join us in Biomed DAR (BII A*Star), to work on a new initiative in the development and deployment of software tools for data management support systems/biomedical data repository. Our work supports BMRC-wide research programmes and industry collaborations.

Successful candidates will work with a team of data scientists, data engineers and UI designers to program a web-application stack for automated data integrity checks, data curation, data annotation, and data imputation for structured data generated by research programmes. Successful candidates will have the opportunity to tap into a large pool of biomedical data from different disciplines and to interact with the companies/researchers to understand their real data needs.

JOB REQUIREMENT

· Minimum bachelor’s degree or diploma in the field of computer science, computer engineering, or other web programming intensive course. With expertise in at least one of the following areas: creating, maintaining, implementing APIs, front-end development, microservices architecture

· Possess minimum 5 years or more of relevant work experience.

· Ability to work independently to translate design templates and ideas into programs with efficient coding.

· Basic knowledge in data analytics and proficient in Python, Node.js, React, SQL

· Prior industry experience with engineering, financial services, healthcare is a plus.

· Able to deliver under tight schedule.

· Good team player with understanding of best practices and cybersecurity.

· Good interpersonal and communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Summary

This position is accountable for preparing the detailed Construction plans in accordance with the JGCAP’s company policies as the key person under the direction by JGCAP’s Site In-charge/ Project Manager and coordinating all construction activities on site among all JGCAP’s disciplines including subcontractors using his technical experiences and construction know-how and ensuring the completion of the work on schedule.

The detail plans as described above are as follows:

• Execution formation with the direction by JGCAP’s Site In-charge/ Project Manager.
• Outline of the Construction & sequence of work.
• Temporary facilities plan (If require) and subcontracting Plan.
• Manpower mobilization plan.
• Construction equipment mobilization plan.
• Work closely with the project scheduler on construction schedule and progress reporting.
• Constructability studies and plans, coordinate with Project Engineers and other related discipline as and when necessary.
• Scaffolding plan.
• Reflect the constructability plans in the inquiry for subcontracting.
• Preparation of documents such as specifications, procedures, manuals and etc.
• Erection plan of extra heavy equipment, inclusive of haulage plan.
• HSSE work control plan including rules and promotion plan together with JGCAP’s Site HSSE personnel.
• Coordinate with Project team of vendor specialists for work which need vendor specialist support.

Duties & Responsibilities:

• Initiate the subcontractors sourcing, inquiry package issuing, work scope clarification, sub-contractors evaluation & selection, cost negotiation and PO issuance.
• Work scope clarification & confirmation, BQ verification and construction direct & indirect cost estimation.
• Initiate Project’s Kick off meeting with the selected subcontractor and coordinating with selected subcontractors to ensure they are in line with company or project strategies and planning. Discussing and clarifying the detail of scope of work, execution plan, commercial issue and technical issue to minimize potential future conflict.
• Carry out constructability studies, construction activities planning and execution plan for the job.
• Coordinating with all engineering disciplines to ensure design, cost and client’s requirement can be achieved.
• Handling of issued drawings or field change sheet to ensure latest drawings to be applied.
• Work closely with the team member and subcontractor to prepare all the MSRA required for the project.
• Working closely with scheduler, subcontractors and clients to plan ahead and schedule critical work paths in order to avoid delays or obstructions on mechanical completion.
• Day to day management of the site, including supervising and monitoring the work progress, site labour force and any work of subcontractors.
• Overseeing quality control and health and safety matters on site.
• Maintain knowledge on all contract terms and legal requirements for project to avoid any delay in projects.
• Identify and resolve all technical issues in Construction process.
• Liaising with clients and company project team, including attending regular meeting and submitting reports to keep them informed of progress and construction issues.
• Liaising with any vendors, consultant, supervisors, subcontractors and the general workforce involved in the project.
• Assist the JGCAP’s Site In-charge/ Project Manager to monitor and manage the overall construction cost, including subcontractors’ progress billing, construction expenses and cost of variation order.
• Prepare and submit the weekly and monthly progress/construction reports to management.

Education Qualifications & Other Requirements:

• Degree in Mechanical engineering or equivalent.
• Over 3 years’ relevant experience in construction management field.
• Experience in oil and gas or chemical projects.
• Knowledge in construction planning.
• Knowledge and experience in sub-contracting work.
• Proficient in MS Office, MS Powerpoint and schedule reporting.
• Clear awareness of construction management tools and method of execution.
• Familiar with Construction Practices.

Interested parties, please send in your detailed resume.

Duties & Responsibilities

• Prepare, interpret and evaluate stress/vibration result.
• Review piping layout and piping information.
• Review piping engineering progress against approved schedule.
• Evaluating changes and taking corrective action when required.
• Provide technical guidance, executing and coordinating the above responsibilities to ensure timely completion and meets project schedule and budget.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements

• Bachelor’s degree in Mechanical Engineering.
• Minimum 10 years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support.
• Good knowledge of Caesar II.
• Interpretation of stress/ vibration analysis report.
• Basic knowledge of AutoCAD.
• Basic knowledge of 3D model review through Naviswork or SPR.
• Strong analytical and reasoning abilities.
• Good interpersonal and communication skills.

Roles and Responsibility:

• Preparation of Piping Material Specification (line classes), specifications/requisitions for bulk and special piping components, vendor quotation evaluations and verifications of vendor documents and piping material take-off prepared by engineers for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To calculate/validate pipe wall thickness, branch reinforcement etc.
• To prepare line index, Material summary (BM/BQ).
• To carry out engineering support work during the construction phase of the project.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements:

• Minimum of Ten (10) years in the field of piping engineering involving material, design, production work, 3D model review, stress and construction engineering support.
• Bachelor’s Degree in Mechanical Engineering or equivalent combination of education and experience.
• Good knowledge and experience of ASME, ASTM, BS and other relevant standards.
• Basic knowledge of AutoCAD/AP3D/S3D.
• Basic knowledge of 3D Model review through Navisworks or SPR.
• Strong analytical and reasoning abilities.
• Good leadership skills.
• Good interpersonal and communication skill.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to perform modelling and real-time simulation of electric vessel’s onboard microgrid and propulsion system.

Key Responsibilities

• Participate in and manage the research project with Principal Investigator (PI), Co-PI and the research team members to develop onboard microgrid simulation models with energy management systems as well as to plan and test the relevant hardware systems.
• Work with research team to deliver the work scope and undertake these responsibilities in the project.
  Work Responsibilities:
  1. Develop detailed electrical models of the microgrid (power system) of various e-vessels based on the concept design in a simulation environment such as Matlab/Simulink.
  2. Design and develop an intelligent energy management system for the e-vessel microgrid for coordinated control of multiple energy sources considering cost, carbon, and operation constraints.
  3. Operate the simulated electrical model with EMS controller to perform simulations for various cases to demonstrate performance and recommend improvements at unit, sub-system and whole system level.
  4. Implement and carry out simulation studies for onboard microgrid and connection to shore charging infrastructure.
• Recommend efficient and reliable power system architecture(s) with other merits of high-density and light-weight.
• Test the relevant power electronics and drives system hardware and troubleshoot the challenging problems.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment and assist in laboratory management.
• Mentor students involved in the research project
• For those hired at senior levels, management responsibilities may be included

Job Requirements

• Have a Master’s or PhD’s degree in Electrical Engineering or equivalent from a recognized University. Major in Power Engineering will be advantageous.
• Minimum 3 years of relevant experience in modelling and energy management algorithm development using MATLAB/Simulink for microgrid applications.
• Knowledge of power electronics, drives, and control is highly preferred. Hardware testing experience will be advantageous.
• Have experience and commitment to participate in project meetings.
• Self-motivated team player and good project management skills.
• Excellent writing, communication, presentation, and interpersonal skills.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.
• We are looking for people who
• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

About the role

Works closely with and have impact on: Global Research & Development (R&D), Post Market Surveillance, and Global Regulatory Affairs (RA) Teams

Reports to: Senior Manager QA R&D

Function: Global QA & Compliance Organization

Work Location/Site: Singapore / Global Headquarters

Role Overview

This position is responsible to ensure that products meet quality goals and regulatory requirements, including but not limited to FDA Regulations, ISO 13485, EU MDR requirements, and Risk Management per ISO 14971 and maintain compliance of the Quality Management System (QMS).

Duties and Responsibilities

• Partner with R&D teams in the USA, Japan, and Singapore to ensure that design control is completed in accordance with procedures, WI, regulatory requirements, and assure that required outputs have been completed
• Execute risk management for devices, processes, and provide the assessment results from product development through to the launch
• Maintain and update risk management files with Global R&D/Manufacturing Engineering (ME) teams to support product development (Risk Management Plans, Risk Control Log, Benefit Risk Assessment Risk Management Report, xFMEA, etc.), and act as the Risk Management expert
• Assist in the review and approval of design development plans, verification and validation protocols, reports, master V&V plans and reports, and design transfer
• Review and approve design verification test protocols, reports and data from a logical point of view (Compliance, rationale, objectiveness and statistics)
• Partner within Quality and R&D to ensure design control documentation (Risk Management, Traceability/Linkages) & design change control requirements are met
• Review and approve biocompatibility protocols and reports
• Ensure compliance of IQ, OQ, tests method validation, Standard Operating procedures and work instructions regarding product development
• Maintain compliance to QMS procedures of the R&D Singapore site, and support the Singapore R&D Site - QA
• Support External audits by competent authorities and notified bodies
• Support internal audits at the local site, and other sites as required
• Review and approve other quality documents (e.g., IQ, OQ, PQ, WI, etc) within areas of responsibility
• Propose and execute quality/process improvements. Write/review policies/ processes/ procedures and related documents
• Manage and monitor the progress of the calibration and maintenance of testing equipment. Ensure calibration or maintenance records satisfy regulatory and QMS requirements (act as Equipment Control Administrator in Singapore)
• Participate in development projects and change control request meetings to support the resolution of engineering issues
• Collaborate with the post-market surveillance team and complaints investigation teams to maintain risk management process throughout a product’s lifecycle
• Provide support for other quality activities and improvement initiatives, quality data collection and trending, CAPAs, change controls, training, etc.
• Support initiatives as identified by management to support QMS and other regulatory requirements in Singapore

Requirements

Experience

• At least 4+ years of Industry experience working as QE Engineer in Medical Device/ Pharmaceutical product or optical engineering business field
• Experience in test method validation
• Experience in Design control, Design Transfer, Design and Development Process
• Demonstrated knowledge of Risk Management (ISO14971), Design control, Design and Development Process and Quality System (any one of ISO13485).
• Understanding and Knowledge of biocompatibility studies
• Experience in coordination and planning of complex activities and ability to identify and resolve complex problems through effective use of technical and interpersonal skills
• Product development experience (e.g. approaches for definition of requirements and specification setting for verification and validation). Practical experience in design control and risk management
• Effective use of oral and written communication skills to clearly communicate the quality position, and the actions necessary to resolve issues
• Interpersonal, team, leadership, and negotiation skills to handle conflicting priorities
• Strong oral and written communication skills, excellent interpersonal and cross-cultural skills required
• Capable of clearly presenting and justifying quality requirements to management
• Accreditation by a professional body is highly desirable. Examples include American Society for Quality (ASQ) Certified Quality Auditor (CQA) or Certified Quality Engineer (CQE)

Skills/Accreditations

• Smooth communication ability
• Business software skills (e.g. Word, Excel and Power point)
• Experience with statistical software such as Minitab
• Voluntary working attitude with a creative idea
• Passionate working attitude to pursue a goal with patience.
• Flexibility for changes

Academic Qualifications

• A bachelor’s degree or higher in Chemical, Bioengineering, Mechanical, Optical Engineering or related fields.

Travel requirements

• 2-3 international travel annually mainly Thailand.

By submitting your application, you consent to HOYA Group collecting, disclosing, and retaining your personal data for employment assessment and verification purposes.

If you are shortlisted, we will contact you within three weeks of your application. Thank you for your application and understanding.

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. Check out the link above for more information, and send your CV to [email protected]