· Ability to resolve machining problems appearing on parts by analysing the regular test cuts usually provided with the Maintenance literature.

· Ability to resolve machine service , Maintenance tasks of the complex nature without Technical assistance.

· Ability to resolve application problems of a normal complexity by occasionally seeking the assistance from experienced Application Engineer.

· Ability to recommend solutions to customers.

· Provide training to customers when required.

· May supervise a less experienced service on a task related to the preventive maintenance, repair and/or installation of Machine.

· Ability to perform on site audit and provide support for customer sale.

· Customer orientated and self-driven.

· Strong and dynamic leader with active listening, understanding and problem solving skills.

· Analytical approach to complex problems, ability to prioritize, reliable, and independent

To assist Design for Safety Professional to carry out following duties:

• Recognise the importance of design for safety and health of a construction project to eliminate or mitigate such risks throughout the different life cycle of a building and structure
• Recognise, and advise stakeholders on, the duties and responsibilities of DfS Professionals in accordance with relevant legal requirements and WSH (DfS) Regulations
• Prepare for DfS review meetings in accordance with WSH (DfS) regulations
• Coordinate DfS review meetings for consideration of safety and health risks during different phases in the lifecycle of a building and structure
• Apply hazard identification tools and risk assessment for DfS review meetings in accordance with organisational procedures
• Establish types of safety and health records to be kept in the DfS Register in accordance with WSH(DfS) regulations
• Coordinate the flow of relevant information to stakeholders throughout the construction project
• Familiar with Design for Safety Guidelines of MOM
• Able to work with consultant team to carry out Design for Safety Review Meetings / Workshops in accordance to GUIDE 1, GUIDE 2 and GUIDE 3 according to MOM regulations
• Prepare and Maintain Design Risk Registers
• Prepare Design Risk Register documentation and handed over to relevant parties

JOB SCOPE & JOB RESPONSIBILITIES

• Design for single line diagram, electrical distribution system, small power, street lighting, compound lighting, ELV etc
• Determine the cable sizing & design routing for sub-main cabling and conduit/trunking wiring.
• Selection for cable, circuit breaker, transformers, UPS, VFD, generator.
• Supervise electrical Installation, testing and commissioning.
• Preparation of project documents including technical proposal, load list, cable schedule, cable routing, switch-room layout, load flow, etc.
• Prepare the BQ for the RFQ.
• Fault and short circuit study, harmonic analysis.
• Preparing specifications and datasheet for RFQ and review offers from vendors for compliance to technical specification, compliance with codes and regulation.
• Prepare documentation for submission and supporting project team on plant start-up, performance test, and optimization.
• Perform the cable sizing calculation and the voltage drop calculation.
• Supervise electrical Installation, testing and commissioning

JOB REQUIREMENT

• Bachelor's degree in Electrical & Electronic engineering.
• Minimum 3 years work experience in process plants or in the water/wastewater industry, with good knowledge in electrical desgin of water and/or wastewater treatment plants.
• Familiarity with AutoCAD, Navisworks.

Job Description:

• Develop and maintain responsive web applications and user interfaces.
• Collaborate with backend developers to integrate APIs and services.
• Write clean, maintainable, and efficient code using modern frameworks and libraries.
• Participate in code reviews and provide constructive feedback.
• Troubleshoot and debug issues in production and development environments.
• Ensure applications are optimized for maximum speed and scalability.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 1-3 years of experience in frontend development.
• Proficiency in HTML, CSS, and JavaScript.
• Familiarity with frameworks such as React, Angular, or Vue.js.
• Knowledge of responsive design principles and cross-browser compatibility.
• Strong problem-solving skills and attention to detail.

Duties & Responsibilities:

• To install, troubleshoot, repair service and maintenance for Chamber, Oven, Chiller & Semiconductor Testing Equipment.
• Provide technical support in the field.
• Prepare onsite for service schedules within budgets.
• Create and execute work plans and revise as appropriate to meet changing needs and requirements.
• Manage day-to-day operational aspects of the after sales service.
• Prepare progress reports, risk assessments and customer updates.
• Continually seek opportunities to increase customer satisfaction and deepen customer relationships.
• Manage sub-contractor and ensure work compliance with specifications.

Job Specifications:

• Diploma holder in Electronics/Electrical/Mechatronics Engineering or equivalent.
• Minimum experience of 1-2 years in the Refrigeration Industry.
• Knowledge and experience in brazing will be an added advantage.
• Willing to travel.
• Self-motivated and able to work independently, with minimum supervision.

Job Description:

• Develop and maintain iOS applications.
• Collaborate with designers and backend developers to implement features.
• Write clean, maintainable, and efficient code following iOS best practices.
• Participate in code reviews and provide constructive feedback.
• Troubleshoot and debug issues in production and development environments.
• Ensure applications are optimized for performance and reliability.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 1-3 years of experience in iOS development.
• Proficiency in Swift and/or Objective-C for iOS development.
• Familiarity with iOS SDK, UIKit, and design patterns.
• Knowledge of RESTful APIs and third-party libraries.
• Strong problem-solving skills and attention to detail.

Job Description:

• Develop and maintain Android applications.
• Collaborate with designers and backend developers to implement features.
• Write clean, maintainable, and efficient code following Android best practices.
• Participate in code reviews and provide constructive feedback.
• Troubleshoot and debug issues in production and development environments.
• Ensure applications are optimized for performance and reliability.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 1-3 years of experience in Android development.
• Proficiency in Kotlin and/or Java for Android development.
• Familiarity with Android SDK, Jetpack components, and design patterns.
• Knowledge of RESTful APIs and third-party libraries.
• Strong problem-solving skills and attention to detail.

You will be responsible for bringing process automation solution to our customers and show them how our products can simplify and integrate complex systems for higher productivity.

Responsibilities & Duties

· Identify and develop potential new customers

· Provide support and further develop existing customers.

· Marketing, promoting and selling of products.

· Provide advice on best solution and product to customers.

· Analyse competitors and market trend.

· Prepare quotations.

· Meeting of sales target and plan.

· Perform other duties as assigned.

Requirements & Skills

· Minimum Diploma in electrical / engineering.

· Experience in Semicon / PCBA will be an added advantage.

· Fresh graduates are welcome.

· Strong communication and sales skill.

· Team player.

We offer

· A friendly and informal working environment.

· A continuous process for learning, development, and career growth.

· Professional and motivated team members.

· Competitive remuneration package.

As a Software Engineer (C++ / C#), you will be a critical team member and fully responsible for developing graphics components for our products. In this role, you will work closely with product managers, UI-UX designers and the R&D team to collaboratively solve real-world problems.

What will you do

• Design, build and maintain efficient and reliable software modules for Screening Eagle software products.
• Develop tools for real-time interactive 3D graphics applications.
• Assist other team members to implement next generation NDT solutions.
• Collaborate with team members to integrate the components to desktop, mobile and web platforms end products.

What do we expect

• BA/MA/MS/PhD degree in Computer Science, Computer Graphics, or strong experience in 3D Games / 3D experiences.
• Proficiency in C++11 and above.
• Proficiency in C# and Unity.
• Good understanding of software design patterns.
• Good knowledge of data structures and algorithms for OOP.
• Good understanding of memory management in non-garbage collected environments.
• Familiar with memory and CPU usage optimization.
• Familiar with 3D graphics pipelines and optimization techniques.
• Solid linear algebra knowledge.Experience in developing for and integrating third party software on desktop, mobile and web tech stacks.

Job Descriptions

• Pre Project site evaluation of electrical product/meter location and perform range test
• Develops wiring diagrams, layout drawings, and as built drawings for system or equipment modifications or expansion and directs personnel performing installation and maintenance duties.
• Installation, testing and commissioning of repeaters or wireless devices
• Follow safe work procedures to remove/ Install electrical products/meter on site
• Conduct Testing and commissioning of installed electrical products
• Ensure Testing and Commissioning reports in proper order
• Preventive Maintenance (Thermoscan/ Eeprom Downloading/ Data/System Backup)
• Perform troubleshooting and perform appropriate corrective solutions for operational equipment where appropriate
• Soldering of electronics parts
• Internal wiring/ assembly of electrical products/meter
• Burning of firmware
• Testing of defective meters
• Project Coordination to ensure works being carry out as per schedule given by working with partners or contractors
• Manage enquiries, feedback and any other operational issues
• Carries out Site survey, Project management, documentation, testing, user training and commissioning
• To ensure timely completion of schedules and new projects start up through efficient coordination of all function groups both internal and external.
• Team player

Requirements:

• Minimum ITE, NTC/ITC, NITEC in Electrical Engineering or any similar qualifications
• Ability to read and comprehend electrical drawings
• Knowledge of firmware is a plus
• Ability to multi-task and effectively manage concurrent initiatives
• Strong interest in electronics engineering and firmware
• Ability to work effectively in a dynamic working environment.
• Applicant must be willing to work during weekend when required.
• Able to draw Autocad (Would be advantage)
• Minimum 3 years relevant experience

Only shortlisted candidates will be notified.

Duties & Responsibilities:

• Prepare and provide proposal/offer to customers for Chamber, Oven, Chiller & Semiconductor Testing Equipment.
• Prepare onsite for service budgets.
• Prepare quotations and follow up on sales enquiries/proposals from customers, to meet the requirements.
• Manage day-to-day operational aspects of sales follow-up.
• Prepare progress reports and customer updates.
• Continually seek opportunities to increase customer satisfaction and deepen customer relationships.
• Manage sub-contractor and ensure work compliance with specifications.

Job Specifications:

• Diploma holder in Electronics/Electrical/Mechatronics Engineering or equivalent.
• A minimum experience of 1-2 years in the Refrigeration Industry.
• Good knowledge and experience in Sales.
• Willing to travel.
• Self-motivated and able to work independently, with minimum supervision.

Job Description:

• Develop and maintain backend services and APIs.
• Collaborate with frontend developers to integrate user-facing elements with server-side logic.
• Write clean, maintainable, and efficient code.
• Participate in code reviews and provide constructive feedback.
• Troubleshoot and debug issues in production and development environments.
• Contribute to the optimization of application performance.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 1-3 years of experience in backend development.
• Proficiency in one or more programming languages such as Go, Python, Java, or Node.js.
• Familiarity with databases (SQL and/or NoSQL).
• Knowledge of RESTful APIs and microservices architecture.
• Strong problem-solving skills and attention to detail.

JOB SCOPES

1. Develop detailed designs and specifications for HVAC systems, including air conditioning, heating, and ventilation systems.
2. Create and review blueprints, schematics, and system layout.
3. Select appropriate mechanical equipment and components based on system requirements and performance criteria.
4. Coordinate with other engineering disciplines, such as electrical and structural engineers, to ensure seamless system integration.
5. Oversee the installation of HVAC systems to ensure they are installed according to design specifications and industry standards.
6. Conduct system commissioning to verify that all components are functioning correctly and efficiently.
7. Troubleshoot and resolve mechanical issues in HVAC systems to minimize downtime and ensure reliable operation.
8. Design systems with a focus on energy efficiency and sustainability.
9. Evaluate and recommend energy-saving solutions and technologies to reduce operational costs and environmental impact.
10. Ensure that HVAC systems comply with local building codes, safety regulations, and industry standards.
11. Address any safety concerns related to the mechanical aspects of HVAC systems.
12. Manage HVAC projects from conception through to completion, including budget management, scheduling, and coordination with contractors and suppliers.
13. Monitor project progress and resolve any issues that arise during the implementation phase.
14. Communicate effectively with clients, project managers, and other stakeholders to understand their needs and provide technical support.
15. Provide training and documentation for system operation and maintenance.
16. Stay updated with the latest developments and technologies in HVAC systems.

Pre-Sales Solution Engineer

Our Sales team is the driving force behind our company's growth, handling the entire sales cycle from prospecting and business development to expanding our services with existing clients through effective account management. We pride ourselves on our dynamic, fast-paced, and multicultural environment, where ambition and innovation thrive.

What is the role about?

We are now searching for an experienced Pre-Sales Solution Engineer to provide technical knowledge, advice, and support to sales representatives and customers during the sales process to resolve requests regarding products and technical issues and to maximize the benefits derived from the organizations’ products and or services.

Key responsibilities:

• Provides presales technical expertise to the Product teams and customers.
• Provides technical input into projects and technical documents and identifies additional sales opportunities with existing customers.
• Installs and demonstrates the products at customer sites.
• Collaborates with product teams to develop and recommend products and services to meet customer’s requirements.
• Assist customers to identify their technical specifications and determine what documentation is required to incorporate the organization’s products into customer applications.
• Maintains up-to-date and comprehensive knowledge of the organizations and competitor’s products and/or services.
• Writes blogs, white papers, and other technical material to promote the products and technical capability of the company.
• Helps the customer, if needed, in the implementation of the new products and makes sure the defined specifications are in place and helps implementing them.

Who are you?

• 7 - 10 years of Technical Solution experience within IT (mainly Cloud)
• BA/BS degree in Business Administration, Sales, or a relevant field
• Experience in the IT Industry (IaaS)
• Experience in writing blogs, attending events, and making presentations.
• Experience working cross-functionally with internal and external stakeholders.
• Fluency in English and one Asian language (both, verbally and in writing) to liase with stakeholders in the region.
• SAP experience is a plus.

Benefits:

• Competitive salary + AWS + annual bonus scheme
• The possibility to develop yourself and build your career
• Comprehensive Health Insurance
• 18 days paid time off
• Multi-cultural work environment (our colleagues are from over 60 countries!) in a company where you can truly make a difference

Ready for the next step?

If you’d like to apply, please do so online. To learn more about us, follow us on LinkedIn or Instagram to get an inside look at life at Leaseweb. For questions, please reach out to Danisha Ardilla, Talent Acquisition Specialist, at: [email protected]

ROLE DESCRIPTION SUMMARY

Thales is seeking suitable candidate for the position of Engineer (System Security).

You will be looking after the governance of the infrastructure and systems for mission-critical Command and Control (C2) system that Thales Solutions Asia (TSA) have developed for government agency. You will be part of a team to manage the security of system, to ensure the system adhere to the security policies, and is well protected from any threats, risks or exploits.

KEY ACTIVITIES AND RESPONSIBILITIES

As aSystem Security Engineer, you are accountable for:

Provide security expertise and management services to support Authority in activities such as:

· Internal / external audits (IM8, Cybersecurity, etc)

· Policies compliance (IM8, Cybersecurity, etc), work with vendor on:

- Vulnerability management compliance reports and patch reports

- Filing of documents and Security Scorecard for audit purpose, to produce it as required

- Monthly logs review. E.g., privilege user activities

- Vulnerability/ Compliance Assessments

- Penetration Tests and Source Code Reviews

· Disaster Recovery (DR) and Business Continuity Planning (BCP):

- All relevant activities related to the DR and BCP planning

- Checks on system backup completion by vendor and datacentre

- Document update and implementations.

· ICT/Threat Risk Assessments (TRA)

· Monthly reviews of privileged accounts and non-privileged account, disable inactive accounts

· Seek security waivers (IM8, Cybersecurity Act, Circulars etc)

· Circulate security notifications/alerts to vendors and ensure status updates too all stakeholders including cybersecurity centre

· Security monitoring/tracking:

- Monitor alerts from SOC

- Update stakeholders regarding SOC alerts

- Review compliance reports with vendors to ensure that system is compliant

- Manage, track and update any security incidents/ issues to all stakeholders

- Review Incident Report (if any)

· Patching:

- Ensure patches are tested and verified before seeking approval for patching downtime

- Communicate system downtime to all stakeholders

- Ensure system availability after patching is completed

· Obsolescence management for software licenses, hardware, operating systems and certificates

· Security enhancement/ integration

· Support the submission of security clearance for related vendors

· Perform other related duties as assigned or requested

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

· Working hours will be 0830 hrs to 1800 hrs (for Monday to Thursday) and 0830 hrs to 1730hrs (for Friday), excluding weekends and Public Holidays

· Outside of working hours, to provide online support via emails and group chats when required based on the priority and severity of issues related to the system

· Able to cope in a highly pressured fast-paced environment

· Prior working experience in cyber security and vulnerability management is preferred

· Strong knowledge of security principles, best practices, and industry standards, such as NIST, ISO 27001, and CIS Critical Security Controls

· Able to understand security posture of systems

· Prior working experience in Project Management is a plus point

· Able to understand the system and software architecture, and user operations environment

· Willingness to pick up any new technologies

Education

Diploma or Bachelor’s Degree in Cybersecurity/ InfoSec/ Information Technology / Information Systems / Business IT or its equivalent

Relevant professional certifications, such as CISSP, CISM, CEH, or other security certifications

Experience

Minimally 1-2 years of experience in cybersecurity and supporting mission critical systems with very stringent SLA e.g. 99.9%

Well-versed in cybersecurity best practices and establishing of its policies

Well-versed in IT Service Management (ITSM) standards, processes, guidelines and best practices

Responsibilities:

• Able to plan, execute, monitor, control and manage project works that are assigned.
• Manage or work with operations teams including engineers, supervisors, and workers to complete the entire project scope.
• Preparation of documentation including but not limited to risk assessment, project status report, method statement, work procedure for the project, quality control, etc.
• Cost control of the materials and labour.
• Liaising and coordinating with all parties such as clients, consultants, consultants’ representatives, site supervisors, sub-contractors; to ensure smooth, timely and successful completion of the project.
• Attend site meetings, inspections, safety meetings, etc.
• Ensure that all the construction safety rules and regulations are being observed.

Requirements:

• Must possess at least a Degree in Engineering (Civil) and is familiar with the British, American Design Standards, and Eurocodes.
• Must possess good communication skills (Written and Verbal).
• Have excellent problem-solving abilities and interpersonal relationship skills.
• Good team player and customer-focused, able to work with all levels on site.
• Able to work independently under pressure with minimum supervision.
• Only candidates with degrees recognised by the Ministry of Manpower, Singapore need to apply.

A. Overall Purpose Of The Job

As a member of the Service Desk team, this position serves as a single point of contact for all IT issues and requests reported by users through the different support channels (phone, email, Self-Service Portal, Tech Concierge Desk). It is responsible for providing support (remotely or onsite) on company supported computer software, applications, and platforms.

B. Key Responsibilities

The scope of responsibilities includes the following:

• Serve as the first point of contact for users experiencing technical issues via different support channels (phone, email, Self-Service Portal, Tech Concierge Desk).
• Diagnose, troubleshoot, and resolve hardware, software, and network issues efficiently. ● Log incidents and requests accurately in the service management tool, categorizing and prioritizing them based on urgency and documenting with event timeline.
• Escalate unresolved issues to relevant next level support team (L2/L3)
• Ensure effective management of all incident priorities including Major Incidents, Priority 1,2,3 and 4 and service requests through various communication channels, including phone, email, and in-person interactions at the concierge desk .
• Act as an Incident Manager and drive end-to-end Major Incident and Priority 1 incident management process
• Monitor ticket, email, chat, phone queues and agent performance to ensure adherence to service level agreements (SLAs) and quality standards
• Handle user account lifecycle management (Joiner, Mover & Leaver), access provisioning in accordance with company IT security policies.
• Perform regular out of office hours on call duties as per operational needs
• Oversee DSAT feedbacks and take corrective action
• Handle account provisioning across various system platforms (Active Directory, GSuite email account, Windows, Linux etc) for staff and generic accounts such as service accounts, admin account or FTP.
• Oversee daily cessation activities and evaluate any potential issues to ensure compliance with audit requirements.
• Provide reports upon stakeholder requests to list the active users or users associated with a specific application.
• Manage and process IT service requests, assist in projects including user profiling setup, software installation, and system configuration

● Assist in DWS (Digital Workplace Services) BAU tasks and projects such as but not limited to the following:

• OS imaging, deployment, upgrade, and tracking (Windows and Mac)
• Endpoint device management
• Hardware refresh
• Maintain up-to-date knowledge base articles for common issues, troubleshooting steps, and SOPs used by the Service Desk team
• Collaborate with cross-functional teams (Product Managers, Engineering, Architects, etc.), and business stakeholders and ensure proper escalation to improve service delivery and user experience.
• Communicate effectively with end-users, keeping them informed of the status of incidents and requests.
• Monitor alerts triggered from servers, databases, or systems and inform the respective teams for necessary actions.

C. Job Profile

• Required Qualifications
• Degree/Diploma in Computer Science, Information Technology, or related field • Proven work experience in an IT support function such as a Service Desk Agent, Desktop Support Engineer, or other similar roles
• Working knowledge and experience on ITSM ticketing tools (ServiceNow, etc.) • Working knowledge and experience on computer hardware, OS, software, and applications both in Windows and Mac environments.
• Comfortable in supporting users over the phone, onsite, or remotely using remote access tools such as Teamviewer
• Possess an ITIL v3 and above Foundation certification is an advantage
• Knowledge of user access management processes and tools such as Sailpoint or OKTA is a plus.

Required Competencies

• Excellent written and verbal communication skills
• A minimum of 5 years of experience in a 24X7 service desk or technical support role
• Good interpersonal and problem-solving skills
• Able to multitask and prioritize the tasks accordingly
• Pragmatic and flexible mindset to succeed in an ever-changing and dynamic environment • Capacity to learn and adapt to new technologies fast
• Ability to proactively carry out tasks independently or with minimal supervision
• Clearly and calmly communicating with team members or stakeholders to manage expectations and coordinate efforts during high-stress situations.

*5 days Workweek

*Medical and Dental Reimbursement

Job Description

• Prepare and monitor long-term and short-term inventory and procurement planning
• Ensure smooth material flow and sufficient quantity for production
• Responsible for the sourcing and purchasing of Raw & Packaging materials, semi-finished good, spare parts and office used equipments etc
• Liaise with various International and Local new suppliers to source for new products
• Manage good relationship with current suppliers
• Obtain the highest quality materials at competitive prices
• Negotiate for competitive price from few quotations
• Review and issue supplier / subcontractor evaluation report
• Ensure the purchasing system and procedure comply with the QMS and Food Safety programs
• Maintain and update ISO / HACCP / BRC documentations

Job Requirement:

• Bachelor Degree / Diploma or equivalent in Business / Supply Chain
• At least 2 years' of procurement experience in manufacturing industry
• Proficient in an ERP system, preferred with Business Central 365 (Microsoft Dynamic Nav)
• Good proficiency in Microsoft office
• A good team player, energetic and willing to work hard
• Good communication skill

Interested applicant may whatsapp resume/ cv to +65 84597671

1. Lead a team of technicians/junior infrared thermographers to carry out infrared Thermography inspections on the electrical installation assigned by the employer.
2. Lead a team of technicians to carry out partial discharge measurements on the Medium/High Voltage Apparatus.
3. Assist the Chief Electrical Engineer in carrying out testing and commissioning of the Electrical system.
4. Assist the Chief Electrical Engineer in carrying out the Pilot cable fault locating test for the PowerGrid Term Contract.
5. Assist Licensed Electrical Worker/Professional Engineer to carry out inspections and tests of existing electrical installation.
6. Assist Licensed Electrical Worker/Professional Engineer to lead a team of electricians to carry out maintenance and servicing of electrical apparatus on existing electrical installation during scheduled shutdown.
7. Assist professional engineers in carrying out power quality analysis and electrical load trending on new and existing electrical installations.
8. Project manage and lead a team of electricians to carry out A&A work on electrical installation, such as replacing equipment/apparatus, switchboard components, cables, etc.

Position: Senior/ Junior Software Engineer

Campus: DigiPen (Singapore)

Description:

We are hiring a team of software engineers to design and develop software platforms for supporting multi-user AR/VR applications.

Salary Package for 2 years:

• Salary range: $4,000 - $8,000 per month
• 13th-month bonus
• Health and dental insurance

Role:

• Design and develop AR/VR software solutions for online education, team collaboration, and workplace training with a focus on real-time interactive simulation.
• Build infrastructure for real-time interactions, scripting tools, backend web services, and frontend applications.
• Design and implement spatial interactions using 3D game engines, modelling animation tools and shader programming

Educational and Experience Requirements:

• A degree in Computer Science or relevant field
• Strong knowledge in C++
• 3D engine development experience
• Familiarity with core engine technologies such as engine architecture, multi-threading, streaming, computer graphics and advanced real-time rendering techniques
• Experience developing optimized modules in C#/C++ within Unity and/or Unreal Engine
• Experience with database management systems
• Experience with software development life cycle
• At least 5 years of work experience in a similar capacity to qualify for the senior position

Application:

To apply, please submit your updated resume and relevant portfolio with the subject line “Senior/ Junior Software Engineer” sent to:

Dr. Tang Liang

Associate Dean of Academic

Email: singapore-jobs(at)digipen.edu

We need you to work along-side the Cloud Apps team, supporting our UI wielding petabytes of streaming data into visualizations and metrics of both real and simulated scenarios, aiding: management; debugging; and real-time monitoring of our Autonomous Vehicles (AVs).

You’ll be connecting the work of many disparate, international teams - ensuring their “day-to-day” goes by uninterrupted. You’ll be writing, and testing, in: React; TypeScript; and Vue.js in order to take stakeholder concepts from vague ideation, to the creation of great, responsive UIs with intuitive visualizations. This work will encompass every step of the journey of our AV fleets… from registration and software updates, to calibration, testing, and finally getting users into commercial rides.

What we want you to do

• Design, build, document, test, and maintain the AV fleets’ monitoring and data visualization platforms
• Monitor, support, and resolve issues as they arise in production
• Assist with high-level analysis, system design, and code reviews
• Communicate with stakeholders and team leads to identify system requirements

What we hope you’ll have

• 5+ years of working professionally delivering complex, high-performance web applications with modern JavaScript tooling
• A good eye for UI, UX, and responsive design
• Comfort taking projects from ideation through to completion, with strong communication and collaboration across multiple international teams
• 3D visualization tools (WebGL, Deck.gl/three.js, Mapbox)

Bonus points for experience with

• Working in a globally distributed team
• React, Vue.js, and TypeScript
• Data visualization (Plotly, D3); video manipulation; WebSockets
• Serverless APIs tools such as: AWS; Docker; Terraform
• Python and/or Golang

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 32 months
• Start from: March 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 4 years of relevant experience in supervision of commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

A qualified candidate will be self-motivated with strong technical and analytical skills as well as possess practical and hands-on approach to engineering control in the areas of metrology management

Responsibilities:

• Recipe creation and optimisation for new R&D applications requirement.
• Preventive and corrective maintenance planning cum execution and vendor management.
• To take charge of new tools technical assessment and tender creation (equipment cum process application startup) and service contract tender set-up
• Drive continuous improvement projects (CIP) to achieve better measurement repeatability (MSA, GR&R, SPC etc).
• To set-up appropriate process and product control plan and out of control action plans (OCAP)
• Provide technical training to related staff on best-known practices in terms of application metrology recipe creation.

Requirements:

• Bachelor degree in Electrical and Electronics, Material, Physics or Chemical engineering
• Minimum 3~5 years of hands-on semiconductor experience (preferably in metrology application and equipment maintenance)
• Possess computer soft ware skills (i.e. JMP, Minitab, SQL, Visual basic, etc)
• Knowledge in problem solving and quality control skills (i.e. LEAN 6sigma, RCA, DOE, etc)

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. Check out the link above for more information, and send your CV to [email protected]