Project specifications, construction drawings and Building Control Act and Regulations.
To be overall in charge of the management and control of ..
Project specifications, construction drawings and Building Control Act and Regulations.
To be overall in charge of the management and control of a team of site staff or Resident Technical Officer(s)
To provide administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, keep records and process the staff leave entitlement, sick leave, in-camp training and other matter concerning the site staff administrative matters, discipline and welfare.
To oversee in all aspects relating to the construction of the Project, keeping and submitting records.
To provide full support and assistance, as and when directed by the Superintending Officer.
To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
To inspect completed work and prepare defects list if necessary.
Requirements
Degree in Civil and Structural engineering
At least 5 years of civil engineering experience, of which 3 years must be of Geotechnical such as cut & cover tunnel and deep excavation works.
Supervise ongoing projects and assist in design office i.e. resolve all technical issue
· Assist in all AC jobs/projects/contract
· Review all the d..
Supervise ongoing projects and assist in design office i.e. resolve all technical issue
· Assist in all AC jobs/projects/contract
· Review all the design/checking of calculations for the company
· Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents
· Act on behalf of the company to maintain reputation and goodwill with the clients
· Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects
· Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects
· Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients
· Promote the employer’s profile and capabilities in the procurement of projects and business development
· Be a management representative of the company for both site and office projects
· Review the design/checking of calculations
· Carry out planning, design drafting, cost estimate etc for the company’s project
· Prepare proposal and performance on tendering works for Consultancy
· Oversee authority’s submission and update of each project
· To cover duties for other Senior/ Design engineers
· Assist in technical design and drafting
· Any other ad-hoc duties as assigned by superior
Criteria:
Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognized by the Professional Engineers Board of Singapore
At least ten (10) years of relevant experience on Civil & Structural projects
a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
b. To provid..
a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.
c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.
e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.
f. To provide full support and assistance, as and when directed by the SRE or client
g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
i. Any other Adhoc tasks are given by management
Criteria:
- Min 4 years of civil engineering experience
- Min 2 years of experience in geotechnical and deep excavation works
Responsible for developing long term customer relationship and maximizing customer retention;
Support on pre-sale and post-sale, not limited to solution proposal on technical requirement, design & budget control, timeline management, etc. based on projects;
Participate in industrial related exhibitions, marketing campaigns/events;
Other ad-hoc duties assigned by the superior.
Qualifications
Min. Higher Nitec in Engineering (any field), or equivalent;
Entry level applicants with the right learning attitude and positive minder are welcome to apply as comprehensive On-Job-Training will be provided;
Excellent written and oral communication skills
Pro-active, possess technical and Negotiation/social problem-solving skills with attention to details;
How to apply,
Please submit your application together with your comprehensive resume, not limited to the education background, career history (if any), current and expected salary(if any), and availabilities to commence work.
(We regret to inform that only shortlisted candidates will be notified)
Job Description & Requirements
Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day manage..
Job Description & Requirements
Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
Advise the PRPM/SPM/PM on site quality and safety issues.
Determine any non-conformances on works
Liaise with Contractor to rectify any non-conformances and document them properly
Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
Ensure that works are carried out according to specifications, drawings and programme withoutcompromising on quality and safety quality and safety matters and suggest quality improvement measures for implementation on site
Supervise installation of instrumentation and monitoring of instrumentation
Lead a team of supervisors to ensure full time supervision of works on site
Any other ad-hoc tasks assigned by supervisor /client
Job Requirement
Minimum Degree in Civil and Structural Engineering
Minimum 5 years relevant experience in project/construction environment
Proficient in relevant software programmes for planning and project workPro-active team player with good analytical and communication skills
Required to have at least 2 years of viaduct and/or flyover construction
Working Days: 5 Days (Monday – Friday)
Working Hours: 8.30am – 6pm
Location: Near Ubi Mrt
Salary: $4000 - $6500
Responsibilities:
Ci..
Working Days: 5 Days (Monday – Friday)
Working Hours: 8.30am – 6pm
Location: Near Ubi Mrt
Salary: $4000 - $6500
Responsibilities:
Civil & structure design, analysis and assessment for foundation, excavation, earth retaining structures, slope, instrumentation and site investigation.
Plan, design, supervise & coordinate for civil structural engineering and infrastructure design and site works.
Ensure all engineering works comply with all relevant statutory standards, regulations and codes of practice.
Liaison with project stakeholders, clients other consultants, contractors and relevant authorities.
Assist Team Leader in maintaining high-quality standards of design and supervision.
Requirements:
Bachelor of Engineering in civil and structural engineering recognised by PE Board.
Minimum 5 years design experience in geotechnical and civil engineering projects in consulting firm.
Well-versed in civil and structural design software.
Familiar with authorities' submission requirements for engineering projects.
Familiar with civil structural designs and BIM will be an advantage.
If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.
Job Responsibilities:
· Responsible for designing and developing mechanical parts for the emergency lighting products.
· Responsible..
Job Responsibilities:
· Responsible for designing and developing mechanical parts for the emergency lighting products.
· Responsible to ensure mechanical design meets the product requirements and project scopes and able to deliver all the product lifecycle deliverables as per the committed plan.
· Carry out project development activities from design stage to mass production.
· Perform root cause analysis on the issues found during development and production phase.
· Establish detail design drawing, bill of material and assembly instruction within project schedule.
Requirements:
· Candidates must possess at least a Diploma, Advanced / Higher / Graduate Diploma or Degree in Engineering Mechanical or equivalent.
· Minimum 2 years of relevant experience in R&D environment, preferably in emergency lighting products.
· Proficient in 3D software (preferably SolidWorks) and Microsoft Office (Excel and Word).
· Effective verbal & written communication skills, a positive attitude, an open mindset and a team player.
· Process strong organizational and planning abilities and excellent analytical and problem- solving skills.
Data Engineer | ElasticSearch | up to $5200 | East
Full-time
Full-time
Others/Any
Singapore, Singapore
Information Technology
9 months ago
Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.
Responsibilities:
Contribute to building ..
Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.
Responsibilities:
Contribute to building and maintaining data systems or pipelines.
Perform setup, installation, configuration, troubleshooting, and upgrades for COTS products.
Develop and implement improvements for data warehouses, data lakes, or equivalent platforms.
Participate in creating documentation, including design documents and troubleshooting guides.
Requirements:
Possess knowledge and/or hands-on experience in data management or data engineering.
Demonstrate proficiency in Linux commands, shell scripting, and various programming languages.
Experience with relational databases and NoSQL databases, data integration tools.
Familiarity with data/search/automation platforms and analytics tools
Knowledge and/or practical experience with Microsoft Azure Cloud services
Experience in one or more of the following will be an advantage:
Data / Search / Automation platforms such as Hadoop, Elasticsearch, Ansible respectively
Data integration tools such as Talend, DataStage, Denodo
Programming languages such as Python, Spark
Microsoft Azure Cloud services such as Azure Data Factory, Azure Synapse Analytics
Analytics platforms such as Databricks, Dataiku, Data Robot
Job Title
Computerised Maintenance Management System (CMMS) Engineer
Location
Singapore
Reporting to
Asset Integrity Superintendent
Main purpose of r..
Job Title
Computerised Maintenance Management System (CMMS) Engineer
Location
Singapore
Reporting to
Asset Integrity Superintendent
Main purpose of role
The CMMS Engineer is a functional support role that is responsible for and/or provide support to;
1. Select asset management processes and procedures fundamental to the Company’s operations management system.
2. Implementation and governance of the Maintenance management policies, procedures, and processes.
3. Development and Management of Maintenance related data and information
4. Operations Planning Activities
5. Continuous improvement of CMMS based on operational and contractual requirements
Key Role & Accountabilities
This position shall provide a full portfolio of services including, but not limited to:
Responsible for Maintenance Processes
1. Administration of the CMMS for operational assets
2. Responsible for asset management of engineering changes
3. Review the CMMS procedures and processes to ensure they are being adhered to and remain fit for purpose. Develop solutions to support areas of improvement
4. Carry out maintenance performance and assurance audits in accordance with defined processes & procedures
5. Coaching and mentoring personnel onshore and offshore in the O&M processes and operation of the CMMS; encouraging peer learning, sharing lessons learnt and maintaining a consistent approach to processes
6. Critical spares and inventory control
7. Training and support of personnel in CMMS (eMaint).
Key Duties
Maintenance & Improvement
1. Perform analysis on current maintenance performance with the aim of identifying areas for improvement
2. Plan and implement maintenance assurance improvement
3. Analysing the performance data, highlighting achievements and areas for improvements, and proposing how to share good practice between Duty Holder Assets
4. Failure Report – administer company’s failure report. Review and update CMMS as required
Verification & HSEQ Compliance
1. Support the O&M team in meeting commitments to the regulators ie Class & Flag State
2. Monitor compliance with verification schedule and execution plan
3. Monitor compliance with the formal technical assurance process
4. Ensure a robust and consistent standard of risk assessment associated with corrective maintenance work orders and deferrals
5. Support delivery of maintenance deferral reductions
6. Support a culture of continuous HSEQ performance improvement via transfer of knowledge and sharing of best practice
7. Participate in audits
CMMS Data and Support
1. Manage agreed changes to CMMS, liaising with stakeholders and support user acceptance testing
2. Carry out assurance audits as agreed with O&M team, analyse data, and provide recommendations
3. Act as a focal point for communicating proposed improvements to the system gathered from the wider O&M community, audits, KPIs data and reviews.
Planning and Scheduling
1. Work with relevant stakeholders in optimizing planned maintenance schedule
2. Ensure deferred, temporary, shutdown maintenance works are correctly recorded
Administration
1. Ensure all data, analyses and reports are held appropriately within the shared drives and any SharePoint sites
The above is an outline to key duties and accountabilities, rather than an exclusive or exhaustive list of responsibilities. The postholder is expected to undertake any tasks which may reasonably be expected within the scope of the position.
Knowledge & Qualifications
1. Diploma / Degree or Equivalent qualifications is essential
2. Able to demonstrate continuing personal and professional development is essential
3. Prior Knowledge CMMS and Database is essential
4. Experience of offshore or plant based on site working is essential
5. Experience in delivering maintenance performance improvement is essential
6. Experience with planning tools MS Project, Primavera and Power BI is essential
7. Marine/Maintenance background and experience is preferred
Supervise customer requirements and collaborate closely with their IT and maintenance support vendors.
Take charge of technical issues reported b..
Supervise customer requirements and collaborate closely with their IT and maintenance support vendors.
Take charge of technical issues reported by customers, ensuring they are tracked and resolved promptly, and escalate to the relevant channels when needed.
Aid with the technical requirements within customers' environments by integrating new and established technologies.
Requirements:
Diploma in Computer Science or equivalent.
At least 2 yearsof experience as a System/Network Administrator.
If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]
Please note that only shortlisted candidates will be notified.
For more job opportunities, please visit our website at www.recruit-expert.com
Our client’s principal activities are to provide Clients with Full Turkey Project Management. This includes engineering, project management through ..
Our client’s principal activities are to provide Clients with Full Turkey Project Management. This includes engineering, project management through the pre-construction planning, critical path development, construction / fabrication / site management, commissioning and hand over. It has executed a wide range of major projects involving Marine FPSO Conversion/Process Module Construction related to Oil and Gas Industry, Sub-Sea Products, Semi-Submersibles, Repair of Oil Rigs, Pharmaceutical Process Packages and Power Generation Facilities since its foundation in 1990. This vast experience and Total Commitment to Customer Satisfaction has since earned it a strong reputation in the industry as a reliable local business partner that aspire to exceed our clients’ expectations.
It is looking for a Senior QA/QC Engineer.
Job Highlights
Listed Company with Good Benefits
Good Stable Career Advancement Opportunities
Conductive and Friendly Working Environment
Career Growth Opportunity |Trainings for Career Growth
Job Description:
Responsibilities:
Prepare and conduct Project Specific Quality requirements training to production Supervisors and Sub-contractors QC Personnel.
Establishing Work Procedures and Instructions.
Support QA/QC Manager for establishing WPS, PQR and WQT Qualifications.
Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
Updating of Inspection status and records on daily basis.
Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
Liaise with client in relation to Quality on Project Specific.
Schedule and conduct Project Specific Quality Audit as per agreed Plan.
Monitor the compiling of Piping Test Packages.
Monitor administration and submission of ITRs for Project.
Prepare and maintain Weekly Weld Rejection Rate Summary.
Monitor the issue and close-out of NCRs for the project and maintain its register.
Monitor progressive compilation of the MDR for the project as work progress.
Any other ad-hoc duties being assigned by your superior.
Requirements:
Degree in Mechanical Engineering
At least 8 years of relevant working experience e.g., welding inspections of structural, piping fabrication, welding jobs including Non-Destructive testing.
Have valid Welding Inspectors Certificates (AWS or CSWIP)
Experience in handling project Audit and liaise with internal & external auditor
Knowledge in structural fabrication, piping isometric drawing and materials
Experience in piping line walk, reinstatement inspections by clear understanding of isometric drawings
Excellent written and good communicative skills, able to interact with people of all levels and teamwork
Monthly Basic Salary: Based on expertise, academic qualification and skills
OT pay entitlement: OT Flat rate S$8/- per hour
Healthcare benefits such as Outpatient, Dental, Health Screening etc.
Cover with insurances, Personal Accident, Hospital & Surgical, Term Life and Work Injury policy
Variable Bonuses
14 days Annual Leave and 14 days sick leave
Birthday leave / Festival eve half day leave
NTUC membership – Applicable for only Permanent confirmed staff
Company transport is provided at 5 pickup points:
Ø Bukit Batok MRT
Ø Jurong East MRT
Ø Boon Lay MRT
Ø Choa Chu Kang MRT (only Morning pickup)
Ø Woodland MRT (only Morning pickup)
NB:
· NO QUOTA FOR THE FOREIGNERS PLEASE.
· SINGAPOREANS ONLY.
Please contact our Recruitment Specialist: Leeza Shaheed (R1770675) for further enquiries about the role
@ [email protected]| and send your updated CV in MSWORD with the following information: Nationality, Full name, Total yrs. of exp., relevant work exp. for how many yrs., expected monthly basic salary, latest drawn monthly basic salary, availability, reason for leaving last two jobs.
At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the ..
At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.
Roles and Responsibilities:
The Technical Support Engineering II is responsible for supporting Field Service Engineers and Customers through the different communication channels adopted.
Strive to resolve difficult problems relating to product deficiencies or user errors within the shortest time.
This role is tasked with maintaining product knowledge within the Tech Support group to manage escalated technical support requests.
The person in this position may also conduct training on products.
General expert on several Alcon products.
Generate Knowledge Articles based on the review of trends on service requests.
Monitor and respond to GTS Now (service hotline and email/ticket support) service requests for the products he/she is trained on.
Participate in training classes as assisting trainer or trainer in development
Support in planning, coordinating and defining the content of product-specific training in coordination with all training locations.
Collaborate with the Training Team when creating or reviewing training content
Requires occasional travel, 20%
Education:
Bachelor’s Degree or equivalent years of directly related experience
Experience (Years):
Minimum 3 Years of Relevant Experience in Ophthalmology / Medical Device Industry in Technical Services roles.
Experience in installing, maintaining, and repairing medical device equipment.
Excellent problem-solving skills and ability to analyze complex technical issues.
Strong communication skills, both verbal and written, with the ability to convey technical information clearly and concisely.
Detail-oriented with a commitment to delivering high-quality results.
Ability to work effectively in a fast-paced, dynamic environment.
Experiences on Ophthalmology equipment most preferred.
Preferred Experience:
Bachelor's degree in engineering or a related field. A focus on biomedical engineering or medical device technology is preferred.
Experience troubleshooting and resolving complex issues on medical devices.
Experience in technical service training to Field Service Engineers.
Electrical/Electronic, Mechanical, and Optical Systems level training.
Experience with networked products and installing medical devices in networked environments.
How You Can Thrive at Alcon:
Opportunity to work with a leading global medical device company.
Collaborate with a diverse and talented team in a supportive work environment.
Competitive compensation package and comprehensive benefits.
Continuous learning and development opportunities.
Manage and lead a team of technical officers, supervisors, technicians and contractors in facility management and operation of assigned buildings/e..
Manage and lead a team of technical officers, supervisors, technicians and contractors in facility management and operation of assigned buildings/estates
Plan and execution of corrective or preventive maintenance programme.
Implement efficiency improvement on the operational process, innovating and implementing systems improvement on energy conservation.
Provide excellent service to meet client expectations.
Achieve effective, economic and safe operations of all Electrical Services' equipment and system by the team of technical officers and technicians.
Providing feasible solutions and coordinate with owners/users, consultants, vendors/contractors on engineering functional requirements and ensure the objectives are achieved.
Conduct regular inspection of existing Electrical installation to ensure that all maintenance programmes are implemented effectively in strict compliance with instructions and guidelines.
Ensure all works carried out safely and / or in accordance with safety procedures.
Any other tasks, when required by Facilities/ Manager.
Job Requirements:
Minimum Degree in Electrical Engineering
Minimum 5 years of related working experience in in Electrical maintenance work or Facilities Management.
Good communication skills both verbal and written
Pro-active, independent, able to work with minimal supervision and perform under pressure
Service orientated mind-set
Possess strong leadership quality, good planning and organizing ability
Provide guidance and troubleshoot Electrical Services' faults.
LEW qualification is an added advantage
Has a good safety mindset and displays good WSH behaviour
Responsibilities
Responsible for designing and deploying functional networks which include LAN, WLAN, WAN
Responsible in monitoring network perfo..
Responsibilities
Responsible for designing and deploying functional networks which include LAN, WLAN, WAN
Responsible in monitoring network performance and integrity and resolving issues tiers of support have escalated by troubleshooting cloud and local infrastructure
Responsible for planning out network installation and/or upgrade project, assign milestone tasks to support personnel and meet company deadlines for full implementation,
Responsible for creating, overseeing and testing security measures
Responsible for mentoring junior team members
Requirements
Min Degree in computer Science, Engineering or a related field
Min 3 years of working experience as a Senior Network Engineer or Network Administrator
Professional certification (e.g. CCNP, CCDP)
Experience in network administration and architecture
Experience with access control models and network security
Responsibilities
Responsible for creating detailed, comprehensive and well-structured inspection plans and collaborate with cross functions to impr..
Responsibilities
Responsible for creating detailed, comprehensive and well-structured inspection plans and collaborate with cross functions to improve tests and inspections
Responsible for estimating, prioritizing, planning and coordinating customers’ escalations and feedback as well as investigating the causes of non-conformances and to implement solutions
Responsible for initiating corrective actions for procedural, product or process deficiencies and handling of NCR/MRB/DMRB disposition, working with internal teams and Operations to look into Root Cause and Corrective actions (RCCA)
Requirements
Min Diploma in Engineering or relevant
Min 3 years of working experience in Manufacturing Industry in Quality
Supervise customer requirements and collaborate closely with their IT and maintenance support vendors.
Take charge of technical issues reported b..
Supervise customer requirements and collaborate closely with their IT and maintenance support vendors.
Take charge of technical issues reported by customers, ensuring they are tracked and resolved promptly, and escalate to the relevant channels when needed.
Aid with the technical requirements within customers' environments by integrating new and established technologies.
Requirements:
Diploma in Computer Science or equivalent.
At least 2 yearsof experience as a System/Network Administrator.
If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]
Please note that only shortlisted candidates will be notified.
For more job opportunities, please visit our website at www.recruit-expert.com
Listed Company with Good Benefits