Responsibilities

• Design, develop, and test electrical systems for company's robotic applications.
• Collaborate with software developers, engineers, technicians and other teams to ensure seamless integration of electrical systems with software and mechanical components.
• Design and implement control systems for robots, including motion control, sensors, safety system and actuators.
• Develop and implement power management systems for robotic applications, including power distribution, battery management, and charging systems.
• Develop safety evaluation, risk assessment, and testing methodology based on international standards.
• Create and maintain technical documentation, including Schematic Design, Cable Harness Drawing, Wiring Diagram, Power Diagram, Bill of Materials, and PCB Layout for assembly and fabrication.
• Ensure compliance with CE, UL, safety standard and relevant regulatory in the development of electrical systems for robotics.
• Support troubleshooting of current AGV in the market.

Requirements

• Minimum Bachelor’s or master’s degree in Electrical / Electronic Engineering or a related field.
• At least 5 years of relevant experience
• Strong knowledge of electrical and electronic systems, including control systems, power management systems, CAN BUS, Serial RS232, Ethernet, UART protocol, sensors, and safety relays.
• Interest in Robotic is a must
• Experience in Drawing Software for electrical & electronic circuits, schematics and PCB Design tools such as E-Plan.
• Hands on experience of crimping, soldering and wiring for power and signal cables.
• Experience with Lithium-Ion battery technology, understand how to maintain and troubleshoot fault for Rechargeable Lithium-Ion batteries.
• Experience with regulatory and safety standards for electrical systems in robotics according to IEC/EN standards.

Working location: Tampines

Working days: Monday to Friday

Working hours: 9am - 6pm

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent
• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing support on maintenance project.
• Responsible for handling system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.

Requirements

• Min Diploma in Electrical/Electronic Engineering, Computer Science/ Information Technology or equivalent.
• Min 2 years of working experience in managing LAN / WAN / Routers / Switches / DNS / Firewall and Milestone System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

(Hiring for new branch at BUKIT BATOK area)

IF YOU ARE looking for...

• Career advancement with work-life balance;
• Substantial flexibility in workplace;
• Creative performance bonus;

Responsibilities:

• Serve as one of a key contact for machine installation and services;
• Assist on technical training to customers;
• Excellent communicate skills to interact with suppliers and customers;
• Solid technical knowledge to provide professional solution on customers’ inquiries;
• Other Ad-hoc duties as required by the superior;

Requirements:

• Obtain min. Diploma in Engineering (any fields) or equivalent;
• Someone without relevant working experiences also welcomes to apply as on-job training will be provided;
• Pro-active, possess technical and problem-solving skills with attention to details;

How to apply,

Please submit your application together with your comprehensive resume, not limited to the education background, career history (if any), current and expected salary(if any), and availabilities to commence work by ‘Apply’ the link.

(We regret to inform you that only shortlisted candidates will be notified)

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

What You Will Do:

• Under the supervision of an experienced engineer or engineering manager, performs detailed engineering review of plans as assigned for compliance with applicable Rules, Regulations and contract commitments.
• Performs work which involves conventional engineering practices but may include moderately complex problems such as the resolution of conflicting design requirements, material standards or coordination of activities among other disciplines.
• Drafts technically accurate and timely reports, and responses to client letters, faxes and other forms of communication for review by an experienced engineer or engineering manager.
• Prepares accurate and timely weekly reports and billing on all work performed.
• Communicates the status of the current workload to all appropriate members of the team to ensure the needs of the clients will be met.
• May propose technical advice to field operations and other technical offices.
• May propose new approaches to problems encountered and make recommendations for changes in methods, procedures or designs.
• May work directly with clients to identify and resolve problems in the area of technical expertise.
• Works as a team member within the group. May work autonomously, once trained, with minimal supervision.
• Implements and maintains ABS Quality System requirements relative to responsibilities after undergoing ABS Quality System training.

What You Will Need:

Education and Experience

• B.S. degree in Civil, Structural Engineering, Naval Architecture, Ocean Engineering, Marine, Mechanical, or Electrical Engineering, or other related disciplines; an M.S. is preferred.
• Graduate from University and a minimum of five (5) years of related industry experience.
• Preference for graduates from a marine-industry-recognized college or university.
• Experience in international business and technical processes, as well as international requirements and problem resolution, is necessary.
• International experience or knowledge of international business and related technical processes, requirements, and problem-solving skills.

For those with Hull backgrounds

• B.S. degree in Civil, Structural Engineering, Naval Architecture, Ocean Engineering or other related disciplines; an M.S. may be preferred.
• Demonstrated computer literacy in engineering software.
• Exposed to Finite Element Method (course work or supervised research).
• For those with seven (7) years or less Machinery backgrounds or experience
• B.S. degree in Marine, Mechanical or Electrical Engineering or other related disciplines.

For those with Machinery backgrounds

• Seven (7) years or more of related engineering experience in a shipyard, design/consulting office, shipping/oil company, or a classification society or
• Seagoing engineering license or professional/chartered engineer license and four (4) years or more of related engineering experience in a shipyard, design/consulting office, shipping/oil company, or a classification society.

Knowledge, Skills, and Abilities

• Knowledge of related technical disciplines required.
• The ability to identify, analyze and propose solutions to problems (i.e., the competence to demonstrate complex problem-solving skills).
• Good command of the English language.
• Ability to communicate orally and in writing.
• Ability to work well with others.
• Familiarity with the ABS Health, Safety, Quality & Environmental Management Systems (internal candidates only).

We are working with an established Shipping firm and they are looking for a Procurement Manager to lead a global team. Please find the details below:

Responsibilities

• Lead the Supply Chain implementation including SAP and key Standard of Operation (SOP) across various departments
• Lead and develop the team to drive business results
• Optimise and maintain procurement-wide policies and operating procedures
• Serve as an active business partner for the sales and operation function
• Oversee key suppliers’ risk assessment and drive continuous cost improvement
• Design contract modification and procurement documentation audit procedures

Requirements

• 6+ years' experience in procurement/category management
• Strong leadership experience to manage a global team
• CIPS / ISM qualifications
• Hands-on experience with ERP/SAP

about company

I am currently working with a well known biotechnology research company. Office located in Woodlands - but there's shuttle bus provided from multiple MRT stations.

Hybrid working arrangement now. Working hours 8am to 5pm. Can end work at 5pm and have more personal time.

about job

• Work as part of Agile scrum teams to design, implement, and test the instrument control software that powers our industry-leading DNA sequencing and genotyping devices
• Develop end to end automated integration, verification and continuous integration system
• Develop, maintain and enhance automated test framework, tools and unit tests
• Collaborate with DevOps to design and manage an automated, computational infrastructure supporting experimentation and research
• Design and code test scripts, deploying to build pipeline, monitoring results

skills and requirements

• Bachelor of Science degree in in computer science or related field
• Min 5 years experience in testing and supporting software for mechanical instrumentation
• Software test development experience with programming and scripting languages (C#, TypeScript, shell script preferred)
• Experience in architecting end-to-end automated test suite for API, desktop, web apps and experience with test frameworks such as pytest, Playwright, or similar
• Experience in writing verification plans, test cases, defects reports, executing & managing test cases using test cases management system and writing verification reports
• Experience with CI/CD, Continuous Testing, and related tools such as TeamCity, Jenkins, GitHub Actions
• Experience in developing instrument software / hardware integration is a plus
• Experience in biotech and bioinformatics is a plus
• Experience in Linux Operating System is a plus

To apply online please use the 'apply' function, alternatively you may contact Stella at 96554170 (EA: 94C3609 /R1875382)

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for analysing, troubleshooting and resolving stamping issues to achieve productivity, quality and cost targets.
• Responsible in assisting in stamping tool design reviews for new product development
• Responsible for establishing process capability, optimum parameter setting, mill cost, Bill of Material (BOM) and work instruction for dies and processes.
• Responsibel in identifying and proposing cost reduction program and upgrading to achieve quality and competitive cost to meet present and future stamping requiremen
• Responsible for providing technical guidance and training to juniors technicians and toolmakers

Requirements

• Min Nitec in Production/ Manufacturing/ Mechanical Engineering/ Tool and Die Making
• Min 5 years of working experience in Stamping Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities & Duties

• Responsible for providing engineering expertise and technical assistance for the installation, maintenance, troubleshooting, repair and modification of facilities and equipment, development and implementation of maintenance procedures and techniques for safe, reliable and efficient operation of the plant.
• Responsible for participating in production machineries installation, modification and maintenance
• Responsible in ensuring that all process equipment, utility installations and electrical installations are maintained and running at optimum efficiency.
• Responsible for defining and generating evaluation plan, and execute qualification plan for alternate component replacement or cost reduction.
• Responsible for working with supplier and procurement team to drive cost reduction and quality issue.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 5 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

JOB DESCRIPTION

l Prepare basic design document including system study report, heat balance, piping and instrument diagram, equipment data sheet, etc. of power plant

l Independently handle kinds of Package equipment ; GTG(gas turbine generator), STG(steam turbine generator), boiler, HRSG(heat recovery steam generator), water treatment package, wastewater treatment package, surface condenser, nitrogen generator unit, cooling tower, chemical dosing unit, etc.

l Take the lead in the preparation of inquiry packages, in the technical clarification/evaluation of Vendor’s technical offers, and in the kick-off meeting/pre-inspection meeting with an inter-discipline collaboration.

l Prepare technical specifications including package equipment data sheets, detail design documentation & Inspection/Procedure documentation requests for Package equipment as shown the above.

l Prepare technical bid evaluation and clarification with Vendors for technical confirmation for package equipment as show the above.

l Review of the vendor packages and follow up on the required approvals.

l Prepare interface list for package and client requirements

l Follow up of all engineering issues for module engineering and close any outstanding issues as promptly as possible.

l Review / approve vendor documents in line with client / contractor’s requirements.

l Attend project meeting / follow up meeting with vendors, client, third party etc.

l Witness factory acceptance tests (FATs) along with client / contractor’s requirements.

l Assist construction team during module fabrication, equipment installation, and assist the pre-commissioning and commissioning team during yard testing.

l Assist procurement team as required during the ordering stage.

l Have skill of combined cycle system analysis software (GT pro. and Master) and calculation program of steam/water condition (steam calc.)

l Have skill of DX tools such as data analysis software (Grafana and Tableau), document search software (Goldfire), Microsoft 365 and document revision analysis (Middle)

l Have made programs and been used inter discipline, e.g., combustion calc., acid due point calc., HRSG and condenser heating surface calc., chemical dosing calc., piping pressure drop calc., coal characteristic analysis, etc.

Have experience as a lead engineer more than 35 years for large scale project for oil & gas project, petrochemical project and refinery project each project with more than 3,000 drawings.

l Have knowledge about applicable international codes such as ASTME, ASTM, EN, BS, VGB, ISO, IEC, NFPA, API, JIS, Gost and GB

Qualifications:

Bachelor’s Degree in Mechanical Engineering

At least 8years of experience as Design Engineer in Mechanical Engineering of Oil & Gas Plant, Petrochemical and Refinery, and in Basic Engineering of Power Plant.

l Bachelor’s Degree in Mechanical Engineering

At least 40 years of experience as Design Engineer in Mechanical Engineering of Oil & Gas Plant, Petrochemical and Refinery, and in Basic Engineering of Power Plant

JOB DESCRIPTION:

- Pressure vessel and tank design in accordance with ASME Boiler & Pressure vessel Code section II, VIII (Div.1 & 2) and IX, API 650 TEMA, JIS B8265 and JPI.

- Take the vendor’s technical quotation review, clarification and evaluation, leading the kick-off meeting/design review meeting, supporting the pre-inspection meeting, coordinating with other disciplines (Project, Process, Civil, Piping, Electric, Instrument, Transportation, Construction, etc.).

- Prepare Requisition including basic technical requirements, detail design requirements, general documentation requirements, inspection and procedure requirements, etc.

- Evaluate performance of vendor’s design equipment such like plate heat exchangers, filters, drum, etc.

- Review vendor package design including 3D model (Navis Works) and follow up on the required approvals.

- Review / approve vendor documents in line with client / contractor’s requirements.

- Follow up of all engineering issues and close any outstanding issues as promptly as possible.

- Monitor and control vendor’s document submission status. Expedite vendor if any delay.

- Coordination with vendors and global project disciplines for the proper execution of the project.

- Attend project meeting / follow up meeting with vendors, client, third party etc.

- Review thermal rating result of shell & tube heat exchangers in performance point of view.

- Discuss technical issue in design review meeting with vendor to close comments of vendor documents for equipment including package items.

- Assist site team during construction and commissioning stage

- Conduct trouble shooting, investigate root cause, propose countermeasure.

- Assist procurement team as required during the ordering stage.

- Vendor qualification work including check of Design/QAQC/Fabrication capability, vendor’s experience, fabrication sequence & typical schedule, work load, etc.

JOB REQUIREMENTS

- Master’s Degree in Mechanical Engineering.

- More than 5 years of experience as Design Engineer in Pressure Vessel Engineering field in Chemical Plant

- Work experiences at Chemical Plant site in Singapore as field engineer for 6 months and worked for pre-commissioning/progress monitoring for Static equipment and equipment preservation. Communication with vendor supervisor.

- Inspection experience of Static Equipment (Carbon Steel Drum, Stainless Steel Drum and FRP Tank etc.) at vendor’s shop.

- Contribution as a lead engineer for static equipment design for any types of projects such as feasibility study, FEED, EPC and proposal work also.

- Communication with global office engineers.

- Strong engineering knowledge in static equipment for high pressure/temperature, various materials types (carbon steel, stainless steel, duplex stainless steel, etc.), various material constructions (clad/weld overlay/lining/mono-wall/multi-wall), welding including tube-to-tube sheet and dissimilar welding.

- Familiar and aware of collaboration between inter-discipline engineering activities.

- Attendance of 2-weeks Welding Training at Hitachi Zosen Corporation in Kumamoto, Japan, experience of actual welding work (SMAW, SAW, FCAW, TIG) and non-destructive examination for weld joint (PT, MT, UT, RT).

- Speaks and write proficent English and Japanese

Roles & Responsibilities

Responsible for overall project management and coordination to new and existing projects with the proper monitoring of manpower allocation, project requirement and attendance of meeting, etc.

• Prepare, discuss and report project schedule, cash flow, budget, etc. with the management.
• Track and report weekly on project(s) completion.
• Track and forecast on monthly project revenue and expenses, etc and other key project metrics.
• Outline and determine project roles of team members based on respective project requirement, timeframe and budget.
• Outline and determine resource requirement (including staffing, software, hardware, equipment and facilities) of respective projects, based on project specification and requirement.
• Continually seeks opportunities to increase customer satisfaction and strengthen client relationships.
• Communicates effectively with clients to identify needs and evaluate alternative business solutions.
• Leads the respective project team to prioritize signed off project works based on analysis of strategic importance, tasks outstanding, obstacles or barriers, budget resources and deadlines.
• Establish and well documented and communicated schedule for all phases of project(s).
• Degree in Civil & Structural Engineering or its equivalent
• At least 3 years of relevant experience
• A good team player with strong analytical and communication skills

Responsibilities

• Responsible managing waste water plant & DI water plant with existing chemistries, instrumentation.
• Responsible for providing technical support to the plating department water treatment, laboratory and engineering and
• manufacturing activities
• Responsible for leading the water treatment section to resolve all issues related water.

Requirements

• Min Degree in Engineering or relevant
• Min 3 years of working experience in manage water treatment system

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Description:

• Responsible for Huawei enterprise networking products after-sales support and network solution reviewing.
• Require to provide low level network solution/design to office/channel partner/key account customers.
• Require to work as a team with either regional/HQ or Singapore team.
• Require to work under minimum supervision to complete tasks assigned.
• Require to provide BOQ and high quality technical proposal.
• Require to be able to present technical solution professionally and have technical training for channel partner and customer.

Job Requirements:

• Tertiary qualification, B. SC in computer science/engineering/telecommunication with distinction. CCIE and HCIE will be an added advantage.
• Minimum 3 years of working experience for networking designing and maintenance. (Proficient in STP,VRRP ,OSPF,BGP,MPLS,MPLS-TE, IPSEC VPN,L2VPN,L3VPN,Multicast, IPV6 , QOS,VXLAN )
• Preferable with after-sales experience in FSI or ISP industry.
• Skills required: networking such as switch, WIFI, router, firewall, SDN technology system integration.
• Knowledge of switch, router, WLAN, security or IT servers/storage would be an added advantage.
• Self-initiative to take the responsibility of task and learn new products/technologies
• The candidate shall be adaptable and flexible to tasks or job scope being assigned.

Engineer (RF)

5 days, 8am to 6pm

Monthly salary $4000 - $6500

Location: Serangoon North Ave


Responsibilities:
• Member of VSAT product development team, contributing to the design of LNA and Power Amplifier
• Designing Up/Down Converters operating at Ka band frequencies

Requirements:
• Bachelor's Degree in Electronics Communication Engineering
• Minimum 3 years of experience in RF system/sub-system design
• Proficiency in RF circuit design, including LNA, PA, Up/Down Converter, Synthesizer, etc.
• Familiarity with RF test and measurement equipment
• Experience with simulation software such as AWR, ADS, HFSS, etc.
• Experience in VSAT system or subsystem design is advantageous

Key Accountabilities:

Technical requirements:

Understands the specifications and requirements in the area of mechanical rotating equipment (such as centrifugal pumps, positive displacement pumps and others) within the assigned package. - Responsible for mechanical design and selection of rotating equipment in accordance with applicable international codes according to ITB or relevant specification.

Engineering document preparation:

Under minimum guidance, prepares technical specifications/standards and requisitions.

Supplier selection:

Under minimum guidance, evaluates the technical and engineering aspects of bids received from suppliers and gives assessment to the senior engineer.

Supplier management:

Assists in placing and executing the orders. For approval, reviews submitted from suppliers’ documents (such as data sheets, drawings and procedures) for their fabrication and compliance. To be a focal point, communicates and coordinates with stakeholders.

Support for other discipline:

Provides technical/engineering support/visit and cooperates for raising the quality level at fabrication shop and participated in construction / commissioning work at site under guidance by the lead/senior engineers.

Technical issue resolution:

With minimum guidance, resolves technical issues using acquired knowledge during the execution of engineering stage, fabrication stage and post-delivery.

Compliance with HSSEQ policies:

To ensure business activities and decisions conform to the laws and regulations and demonstrates high standard of ethical behavior.

Qualifications:

- Bachelor Degree in Engineering

- Minimum 5 years of relevant working experience in Mechanical engineering in oil and gas sector, preferable experience in off-shore application

- Possess relevant experience working on EPC projects

- Familiar with International Industry Codes such as ASME, API etc

-Able to speak and write proficient Eng and Jap has an addtional advantage.

Technical:

- Advanced Microsoft Office

- Intermediate AutoCAD

Leadership

- Communication skills

- Adaptability

- Ability to translate business information to technical requirements

Work Conditions

Most of the working time is in the office. Engineers can be sent to suppliers’ s sites/offices and project sites including Offshore for construction and commissioning support.

We are currently working with a Global Manufacturing firm who is looking for a Laser Manufacturing Engineer. You will be overseeing the technical alignment of the system to make it more efficient. If you have sufficient knowledge in lasers/using laser equipment, please apply to this role! This position will have the opportunity to travel to US for trainings.

Responsibilities:

• Oversee the seamless transfer of new products from design engineering to manufacturing sites for mass production.
• Develop and implement continuous improvement projects, employing a systematic approach to problem-solving.
• Develop and assess manufacturing processes, utilizing knowledge of product design, fabrication, assembly, tooling, and materials.
• Create assembly process flows, descriptions, and work instructions.
• Resolve daily issues promptly to facilitate the smooth fulfillment of production orders.
• Apply process control, such as statistical process control (SPC), to monitor, analyze, and refine processes, reducing variability.
• Enhance manufacturing efficiency through the analysis and planning of work flows, space requirements, and equipment layout.
• Ensure product and process quality by implementing appropriate testing methods, analyzing process capabilities, establishing standards, and validating manufacturing processes.
• Prepare product and process reports by collecting, analyzing, and summarizing failure/defect information and trends, and follow up with corrective/improvement actions.
• Determine calibration and maintenance processes for production tools and test equipment.
• Provide technical support to field service teams.

Requirements:

• Good knowledge of solid-state and fiber-based lasers.
• Hands-on experience with the assembly and testing of optical, electro-optical, electro-mechanical, and laser systems.
• Good understanding of manufacturing best practices (e.g., ISO 9001, Kanban, LEAN, 8D, Design-for-Manufacturability, etc.).
• Bachelor’s degree and above in laser, optic, or electro-optical engineering.
• Experience in laser systems manufacturing.

Responsibilities:

• Participate in the daily development process of the company's Android applications, focusing on quality and timely delivery.
• Responsible for the iterative improvement of app architecture, frameworks, and components, facilitating rapid and high-quality updates to meet business requirements.
• Continuously enhance app performance and user experience, leveraging advanced optimization strategies for optimal functionality.
• Efficiently tackle and resolve complex development issues, ensuring smooth progression and adherence to quality standards.

Requirements:

• Bachelor’s degree or higher in Computer Science or a related discipline, with a strong grasp of core computer science concepts.
• Proficiency in Android development, including expertise in Kotlin and Java, and familiarity with Android system nuances.
• Proven track record in developing and optimizing Android applications, evidenced by a portfolio of well-designed and functional apps.
• Exceptional problem-solving abilities, capable of swiftly addressing and solving development challenges.

Responsibilities

• Responsible for designing and developing windows applications in .net technologies mostly used for manufacturing equipment
• Responsible for developing solutions to improvise performance & scalability of systems
• Responsible in full system development life cycle
• Responsible for conducting applications training and handle enquiries for technical issues
• Responsible for supporting on site installation, debugging and hand technical support

Requirements

• Min Diploma in Information Technology or related
• Min 2 years of working experience in C#, C++, .Net
• Experience in developing windows Based application

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Service Desk Engineer

Working Locations: Client side or Head Office (Bartley/Tai Seng MRT)
Working Hours: Follow client operating hours/9am-6pm at Head Office

Job Description:

Helpdesk

• Provide first level contact and convey resolutions to customer issues
• Properly escalate unresolved queries to the next level of support
• Track, route and redirect problems to correct resources
• Update customer data and produce activity reports
• Follow up with customers, provide feedback and see problems through to resolution
• Recommended procedure modifications or improvements

NOC

• Continuously monitor network infrastructure for performance and security issues using network management tools and systems.
• Respond to alerts and incidents, diagnose problems, and take corrective actions to minimize network disruptions.
• Investigate network issues, conduct root cause analysis, and collaborate with other teams to resolve complex problems.
• Perform routine network maintenance tasks, such as firmware updates, patch management, and configuration changes.
• Escalate critical incidents to higher-level support or specialized teams as needed and ensure timely resolution.
• Maintain comprehensive records of network incidents, changes, and resolutions for future reference and reporting.
• Monitor network security events and respond to potential threats, working closely with the cybersecurity team.
• Monitor network traffic and capacity utilization, providing input for capacity upgrades and optimization.

Optical and Transmission

• Design and plan DWDM network infrastructure to support high-capacity, long-distance optical communications.
• Configure and maintain DWDM equipment, including optical transmitters, receivers, multiplexers, and amplifiers.
• Manage the allocation and optimization of optical wavelengths within the DWDM network to maximize bandwidth utilization.
• Perform optical link budget calculations and engineering to ensure signal quality and reliability across long-haul fiber-optic links.
• Diagnose and resolve issues related to DWDM equipment, optical signals, and network performance.
• Implement optical network security measures to protect against unauthorized access and data interception.
• Collaborate with network engineers, system engineers, and other IT teams to ensure seamless integration of DWDM technology into the overall network infrastructure.

Infra (Network & System)

• Design, plan, and implement network infrastructure to meet the organization's requirements and goals, including hardware, software, and network components, to meet project requirements.
• Configure and maintain routers, switches, firewalls, and other networking equipment to ensure optimal network performance and security.
• Continuously monitor network performance, troubleshoot network issues, and proactively address potential problems.
• Implement and maintain network security measures, including firewalls, intrusion detection systems, and access controls.
• Integrate various hardware and software components into a unified system, ensuring compatibility and functionality.
• Develop and execute comprehensive testing plans to validate system functionality and performance.
• Diagnose and resolve system issues, collaborating with other teams as needed.
• Perform regular system maintenance tasks and coordinate system upgrades and patches.

Requirements:

• Diploma with 3 yrs experience, or a related field (or equivalent experience).
• Strong knowledge of networking principles, protocols, and technologies (e.g., TCP/IP, DNS, DHCP, VPN).
• Experience with network monitoring tools and technologies (e.g., SNMP, NetFlow, packet capture analysis).

https://wa.me/6596420989

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Responsibilities

• Responsible for developing of test scripts, issues tracking and test management
• Responsible for conducting qualification test of new product or revised component with issuing of test report and recommendations to the test findings
• Responsible for testing accordance to applicable product standards, guidelines, regulations and dormakaba Corporate Standard (DCS)
• Responsible for preparation of samples and coordinate with PQS EN or certification bodies for product certification
• Responsible for evaluating and analysis of competitors’ products – teardown analysis, VA/VE

Requirements

• Min Diploma in Engineering or relevant
• Min 2 years of working experience in production quality or test lab.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026