Job Overview

Candidate will be responsible for improving yield and device performance of automotive chips during production ramp, and high-volume manufacturing.

• Analyze yield, process, diagnostic, and semiconductor test data to ramp production volume, support lot disposition, drive baseline yield improvement, and isolate root causes of yield loss and product performance degradation.
• Support foundry / assembly house on process qualification, test house management, test probe card, load board and tester validation on performance over process and operating condition, debug and release test program into mass production.
• Collaborate with wafer foundries, assembly and test houses and Qualcomm PTE (product and test engineering) team to isolate root causes of yield loss and drive improvements.
• Interface with management and business teams to provide yield outlook for product planning and cost analysis.
• Lead teams and task forces to address and drive resolution of yield excursions.

Minimum Qualifications

- 3+ years experience with ATE test platforms, especial familiarity with Advantest 93K.
- Good understanding of VLSI test techniques.
- Basic understanding of digital/analog functional block and electronic circuits.
- Basic data analysis skills.
- Fluent in English, both spoken and written.
- Proactive working attitude.
- Capable to handle new challenge.

Preferred Qualifications

- Basic knowledge of design for test, design for manufacturing, design for experiment.
- Basic knowledge of reliability test, and quality concept.
- Basic knowledge of foundry process, assembly process, and failure analysis.
- Good experience with yield management software (O+ or exensio)
- Understand yield management, continuous improvement and cost reduction in a high volume fabless semiconductor environment
- Understand test house working model, supply chain and KPI.

- automotive related experience is preferred

The Job Responsibilities:

- Responsible for performing outdoor & indoor repair, maintenance and troubleshooting work

- Where there is no outdoor repair, you are required to work within the Company workshop

What It Takes:

· Degree/ Diploma/ Certificate in electrical & electronic engineering (AC & DC motors, single-phase & three-phase, lead acid & lithium batteries, electrical control circuits, hydraulic system)

· minimum a year of customer support experience

· ability to work as part of a team and possess strong communication skills

· obtained local driving license is a plus

Join our R&D team within Chemtech division in Singapore as Electrical and Instrumentation Technician/Engineer.

Your main tasks and responsibilities:

• The job holder is responsible for the execution of preventive maintenance, troubleshooting, repairs, and maintenance of all pilot plant facility as well as maintaining the calibration program of all instruments.
• Develop electrical and instrumentation systems tailored for ATEX or IEC classified environments. This includes designing control panels, crafting intricate wiring diagrams, and meticulously mapping out instrumentation layouts.
• Oversee the installation, commissioning, and maintenance of electrical and instrumentation systems. Troubleshoot and resolve electrical and instrumentation issues to minimize downtime and ensure safety. Conduct routine inspections and preventive maintenance on electrical and instrumentation equipment.
• Ensure all electrical and instrumentation systems adhere to relevant safety standards and regulations. Participate in safety assessments and develop strategies to mitigate risks associated with electrical and instrumentation systems.
• Maintain accurate documentation of electrical and instrumentation designs, configurations, and maintenance records. Prepare technical reports, drawings, and documentation for internal and external stakeholders.
• Identify opportunities for process optimization and efficiency improvement in electrical and instrumentation systems. Stay updated on industry trends and emerging technologies to recommend upgrades and improvements.

To succeed in this role, you will need:

• Diploma or Degree in Electrical Engineering with relevant experiences in pharmaceutical, chemical or petrochemical industries.
• >7 years for Diploma or 3-5 years for Degree experience in pharmaceutical, petrochemical or flavor and fragrance environment.
• •Hands-on experience in ATEX or IEC environment, preventive maintenance, troubleshooting, repairs, maintenance of automation and equipment, as well as maintaining the calibration program of all instruments.
• Ability to conceptualize and provide design for electrical, instrument and control wiring diagrams.
• Requires skills in analyzing malfunctions in control systems and making appropriate repairs. This includes troubleshooting PLCs, field sensors, control wiring, general I/O wiring, & networks/communications wiring.
• Requires skill in the use of technicians' tools such as electric meters, oscilloscopes, calibration devices, electronic testers, etc.
• Awareness for safe handling of chemicals, potentially dangerous materials and equipment.
• Proficiency in AutoCAD or other relevant design software.

Location: We are based in Cleantech 3 (This role is for our new R&D Test Centre)

Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment.

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable

ABOUT

As a leading financial software company, NeoXam delivers data management and transaction software solutions to financial institutions located in Europe, America, and Asia Pacific. Every day, NeoXam helps to process more than $14 trillion worth of assets for over 10,000 user accounts across the globe.

Headquartered in Paris, NeoXam expanded its business to China in 2009 and established Singapore’s office in 2017 (now APAC HQ). Supported by over 600 employees globally including 80 staff in APAC, the company continues to grow and is looking for local talents to join our Singapore’s office to pursue this rewarding journey through an internship which would lead to a working contract for the best performers. Candidates will have the opportunity to join a multicultural dynamic team working in an entrepreneurial spirit on one of the best worldwide multi-awarded Data Management and Investment Book of Record solution (Datahub) used by the largest financial institutions globally.

JOB DESCRIPTION

NeoXam Singapore is looking for an experienced and motivated Neoxam Datahub Software & Application Manager who will lead the team working on Enhancement and Support of NeoXam Datahub Entity Master. This role will be based in Singapore, working closely together with the NeoXam project team.

He / she will join a team of experienced consultants and participate in the implementation and support of the application, the installation of new modules and features using NeoXam DataHub: the most comprehensive, efficient and customizable solution for centralized data management available on the market. The solution acts as a hub, a central repository and a user-oriented data management tool for data used or produced by financial institutions.

MISSION & MAIN ACTIVITIES

• Lead the team working on Enhancement and Support of NeoXam Datahub Entity Master
• Writing and implementing modified codes to meet client’s requirement
• Developing quality assurance procedures
• Working closely with Research & Development (R&D) team on the improvements of NeoXam software solutions
• Implementing and managing NeoXam Datahub software
• Test and evaluate the success of software implementation
• Run analysis on installation and implementation problems to identify and resolve technical issues within the established time frames to meet clients’ satisfaction
• Identifying areas which requires modification in existing programs and subsequently work with R&D team on these modifications
• Provide best practice guidance to clients by leveraging technical expertise, NeoXam software knowledge and industry experience
• Ensure coordination and responsive follow-up to client needs and requirements, interfacing with the appropriate NeoXam departments and colleagues as needed
• Communicate NeoXam’s offerings and identify new opportunities to grow
• Participate in support efforts
• Continuously keep up to date with NeoXam DataHub functional and technical features and improvements
• Identify and resolve any installation and implementation problems to the clients satisfaction within established time frames
• Manage the overall design and configuration activity by ensuring the team follows configuration / scripting / design guidelines
• Analyze the clients’ needs, accompany and coach their teams and/or take charge of the product implementation, meet clients’ requests, manage the client relation and coordination of the project

PROFILE

• Engineering Bachelor Degree / Master’s degree or equivalent
• Minimum of 4 years of successful implementation and support of NeoXam Datahub solution at customers worldwide
• Minimum 8-10 years of experience with Financial software implementation and IT Projects in the banking / financial industry.
• Strong analytical and problem solving skillsExperience of a development language (Java, C, C++…) is required to be capable of writing rules in scripting language
• Experience with RDBMS, Data Modeling, and SQL language
• Understanding of Enterprise Data Management and ETL techniques and processes
• Previous experience of financial data provider feeds such as Bloomberg, Refinitiv, ICE and others
• Knowledge of financial instruments such as Equities, Fixed Income and Derivatives
• Previous project experience with involvement in multiple stages of the project life cycle
• Independent, with own initiative and good interpersonal skills and are concerned about the quality of service provided
• Proactive and a real team player
• Fluent in English

WE OFFER

• Competitive compensation
• Excellent medical, dental and maternity coverage for you and your dependents
• Life insurance, allowance
• A co-working space filled with multinational companies / startups / entrepreneurs, located next to Raffles Place MRT
• A collaborative, collegial and fun-loving office culture
• An exposure to diverse technical and functional areas

At NeoXam, we love people who are curious, involved and self-driven, who like to propose solutions and for whom it is essential to continue to learn and grow on a daily basis.

The position requires rigour, tenacity and a good ability to communicate and promote best practices.

Review lac scripts and be involved with the solutioning team's discussions to provide feedback and validate improvements

Be involved in DevOps and Security domain discussions as part of your scope Design and implement infrastructure automation solutions using Terraform to manage cloud-based and on-premises environments.

Develop and maintain CI/CD pipelines to automate software deployments, infrastructure provisioning, and configuration management.

Conduct regular code reviews, perform testing, and maintain documentation to ensure the reliability and repeatability of infrastructure deployments.

Troubleshoot and resolve issues related to infrastructure automation, ensuring minimal downtime and optimal system performance.

Act as a hands-on technical advisor, mentoring peers and providing technical guidance on best practices for infrastructure automation and DevOps processes. Design and implement automation improvements to support large scale Linux, Windows, SAN storage, and virtualization environments (e.g. VMware) Perform provisioning and automation enhancements via scripting (e.g. Bash and Python) and centralized management tools.

Experience and skills requirements

Experience

Proven experience (3+ years) as an Infrastructure Engineer, DevOps Engineer, or similar role focused on infrastructure automation and laC.

Experience in adopting cloud security tools like Azure Security Centre, Sentinel

Good understanding of cloud security and solutioning concepts to get up to speed on design discussion

Expertise in using Terraform to manage cloud-based environments (e.g. AWS, Azure).

Strong proficiency in scripting and programming languages (e.g. Python, Bash, PowerShell) for automation and configuration management tasks.

Experience supporting virtualized environments on centralized storage, (e.g. Nutanix, VMware vSphere).

Certification

Bachelor's degree in Computer Science or a related field, and at least 5+ years of relevant work experience.

Added advantage with the following:

Good understanding of networking concepts, security best practices, and infrastructure architecture.

Strong operating systems management skills, with a proven background in Linux (RHEL/CentOS) administration, Windows administration experience a plus Tenacity to persevere and meet challenges head-on during project implementation Inquisitiveness to assess and understand the latest cloud technologies and features Excellent analytical and problem-solving skills, with an eye for detail

Strong ability to juggle multiple projects and work closely with various key stakeholders

Team player who is comfortable working in a highly collaborative environment and excellent customer service.

• Work closely with project team to assist Quality and Validation Manager Asia region to the tasks on schedule and within quality standard compliance.
• Responsible completion of the Quality, Cost, and Time validation functions for customer projects.
• Create and maintain qualification/validation documentation for mechanical, software, and hardware components from the design phase of projects.
• Oversee the qualification and validation processes for projects in conducting risk analysis, protocol drafting, and test implementation during FAT & SAT process internally and partners’ sites.

Requirements:

• Diploma in Mechanical Engineering or equivalent
• At least 2 years of quality and validation of automated systems experience.
• Proficient in MS Office (Excel, Word and PowerPoint).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

• Working day: Monday – Friday
• Working Hour: 8:30am - 6:15pm
• Salary range: $3,200 - $5,800
• Location: Woodlands Ave 9

Job Summary:

The Electrical Controls Design Engineer will be responsible for designing, developing, and implementing control systems for various electrical machines. This role requires a strong background in electrical engineering, control systems, and a deep understanding of machine operations. The ideal candidate will be able to work collaboratively with cross-functional teams to ensure the successful delivery of projects.

Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

We are seeking a talented and a motivated Senior Data Engineer to join our dynamic team. As a Senior Data Engineer, you will be responsible for designing, implementing, and maintaining scalable data pipelines and infrastructure to support our data-driven initiatives. You will collaborate closely with cross-functional teams to understand data requirements, optimize data models, and ensure the reliability and performance of our data systems.

Key Responsibilities:

 Design, develop, and maintain robust data pipelines to ingest, process, and transform large volumes of structured and unstructured data from various sources (e.g., Database, API, SFTP).

 Build and optimize data models and schemas to support efficient data storage, retrieval, and analysis.

 Implement data integration solutions to consolidate data from disparate systems and sources.

 Work closely with Data Scientists and Analysts to understand their requirements and provide them with clean, reliable, and well-structured data.

 Collaborate with DevOps and Infrastructure teams to deploy and manage data infrastructure in cloud environments (e.g., AWS, Azure).

 Familiar with the concept of data security to ensure the data pipelines are secured and PII (Personally Identifiable Information) data are encrypted.

 Monitor and optimize the performance, scalability, and reliability of data systems to ensure high availability and low latency.

 Design and develop MLOps production pipelines; provide technical support to data scientists/ML engineers by getting their ML/DL models deployed at scale and meeting SLAs on both cloud and on-premises GPU and CPU instances.

 Develop and maintain documentation, standards, and best practices for data engineering processes and technologies.

 Stay current with emerging technologies and trends in data engineering and contribute to the continuous improvement of our data architecture and practices.

 Explore, evaluate, and champion the introduction of next-generation technologies in the data-ingestion workflow. Participate in project planning and provide technical guidance on cloud architecture for data projects.

Requirements:

 BS in Computer Science or other related discipline is required. Advanced degrees in Computer Science (PhD, MS) are highly desirable.

 Proven experience (3 years) working as a Data Engineer or in a similar role.

 Strong proficiency in programming languages such as Python. Conversant with data structures and algorithm design.

 Hands-on experience with distributed computing frameworks and big data technologies such as Spark, Kafka, etc.

 Proficiency in SQL and experience with relational databases (e.g., Azure SQL DB, AWS Redshift).

 Experience with data modelling, ETL/ELT processes, and data warehousing concepts.

 Familiarity with cloud platforms and services (e.g., AWS S3, AWS Step Functions, AWS Airflow, Azure Data Logic Apps, Azure Blob Storage).

 Experience with setting up SSO using AD and implementing RBAC (Role Based Access Control) for data security.

 Excellent problem-solving skills and attention to detail.

 Effective communication and collaboration skills, with the ability to work effectively in a cross-functional team environment.

 Experience with version control systems (e.g., Git) and CI/CD pipelines is a plus.

Key Responsibilities:

Mandatory Skill : SCCM Configuration,OS Deployment, Windows Intune

• Image Creation and Management: Develop, deploy, and maintain standardized Windows 10/11 images for endpoint devices across the organization, ensuring optimal performance and stability.
• OS Deployment: Configure, troubleshoot, update, and maintain global OS Deployment variants on SCCM.
• Security Compliance: Ensure that all Windows endpoint devices comply with company security policies and standards, conducting regular audits and updates, as necessary.
• Technical Support: Provide expert technical assistance for Windows endpoint devices, including desktops, laptops, and other devices. Troubleshoot and resolve software and hardware issues to maintain system reliability.
• Project Coordination: Coordinator of the Windows 11 migration project, tracking progress of timelines, gathering of information, issues tracking, and risk mitigation to ensure a smooth transition.
• Collaboration: Work closely with IT teams, partners, and other business departments to ensure project and operational objectives are met.
• Issue Resolution: Provide ongoing technical support during and after the migration, addressing and resolving any issues related to the transition, including deployment failures, application problems, and performance concerns.
• Documentation: Create and maintain detailed documentation for support procedures, configuration settings, and troubleshooting steps to ensure consistency and support efficiency.
• Cross-Functional Coordination: Collaborate with IT teams involved in patch management, security, and regional deskside support to ensure a seamless migration experience.

Required Experience:

• OS Expertise: Extensive experience in troubleshooting and supporting Windows 10/11 operating systems.
• Image Creation and Deployment: Experience creating, maintaining, and deploying OS Images in a large enterprise environment.
• Endpoint Management: Proficiency with endpoint management tools such as Microsoft SCCM, MDT, Intune, or similar.
• Security Practices: Strong knowledge of endpoint security best practices and implementation.
• Technical Understanding: In-depth understanding of Active Directory, Group Policies, Networking, and Endpoint Security.
• Scripting and Tools: Experience with PowerShell, command-line scripts, and SysInternals tools

Desired Soft Skills:

• Problem-Solving: Exceptional problem-solving skills with a keen attention to detail and the ability to resolve complex issues effectively.
• Communication: Strong communication skills with the capability to work independently as well as collaboratively within a team environment.
• Adaptability: Ability to adapt to changing priorities and manage multiple tasks efficiently.

• In-house Support IT
• Support and maintain WAN/LAN network links and equipment's
• Administration of the Servers
• Support and maintain the Firewall System
• Fault diagnosis and resolution of software and system errors on the desktop
• Fault diagnosis of desktop hardware and co-ordination of repairs and replacements
• Software installation and decommissioning of desktop hardware
• Outdoor / Onsite Project Support for IT Related Products
• Interactive Panel Firmware update
• Network Devices Firmware update
• IP configuration of network devices
• Support Product Preventive Maintenance
• Any other task assign by Superior

• Salary: $2,300 to $3,300
• Working Days: 5 days
• Working Hours: 9am-6pm
• Office location: Bukit Batok Crescent, Wcega Plaza
• Working location: Singapore Islandwide - Client site

Project planning, cost control and execution. Supervision of work at site. Other special works as assigned by supervisor from time to time. Assume responsibility for the successful completion of the projects and meet customers satisfaction.

Responsibilities:

• Plan work schedule for the project under responsibility, in coordination with supervisor
• Coordinate and monitor work progress with customers and relevant parties for information to expedite installation
• Supervision of work at site
• Schedule purchase and deliveries of all materials for the project in a timely manner
• Check and ensure all installations conform to project specifications
• Update projects progress regularly supervisor
• Assign task and supervision of System applications, drafting, database generation and commissioning
• Identify and secure variation order
• Cost control. Monitor and ensure delivery of financial commitment as per CIS
• Ensure that all work completed are filed and invoiced
• Follow-up on payment from customers and verify payment to our suppliers
• Train customer and provide first year maintenance warranty schedule visit
• Hand over project to customer and later to service team
• Perform regular quality audit for all the suppliers and sub-contractors Qualifications

Requirements:

• Degree, Diploma/ ITE or 3 years relevant work experience in Building automation system
• Relevant experience in Building Services/BMS/BAS/Controls/M&E or construction
• Excel, Word and Project essential
• Need to work odd hours as and when required, whenever the work need to be done on time.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Position title: Sales Engineer
Location: Loyang Way
Working Days: Mon - Fri
Working hours: 830 a.m. to 530p.m.
Salary: $3,000 - $4,500 (depends on experience)

Position Overview:
We are seeking a motivated and experienced Sales Engineer to join our team. The Sales Engineer will play a critical role in driving sales and delivering technical solutions that meet our clients’ needs. This role requires a blend of technical expertise and sales acumen, as you will work closely with customers to understand their requirements, present tailored solutions, and support the sales process from inception through to implementation.

Key Responsibilities:

1. Customer Engagement and Relationship Management:

• Develop and maintain strong relationships with key customers and stakeholders.
• Conduct needs assessments to understand customer requirements and challenges.
• Provide technical consultation to customers, offering solutions that align with their operational goals.

2. Sales Support:

• Scout, develop and obtain leads with new customers to develop sales in your assigned territory.
• Prepare and deliver compelling presentations and product demonstrations to potential clients.
• Develop detailed quotes and proposals, addressing customer needs and specifying technical requirements.

3. Service Support:

• Liaise with customers, end-users and purchasers to introduce the company’s service capabilities.
• Drive the sales of services to existing and new customers with equipment sold by the company.
• Coordinate with the engineering and service teams to ensure seamless project execution and delivery.
• Act as a point of contact for post-sales support, troubleshooting and sales of service.

4. Market and Product Knowledge:

• Stay up to date with industry trends, emerging technologies, and competitive landscape.
• Continuously enhance product knowledge and understand advancements in equipment and service offerings.
• Share insights, feedback and customer requirements with the product development and marketing teams to drive innovation.
• Participate in all company-participated trade shows and seminars in Singapore and abroad.

5. Training and Support:

• Educate customers on equipment features, benefits, and maintenance requirements.
• Conduct training sessions for customers and internal teams to ensure proper usage and understanding of products.
• Assist management with any other ad-hoc tasks and duties as and where required.

Requirements

• Education: Bachelor’s degree in engineering, Mechanical Engineering, Electrical Engineering preferred or related technical field, Minimum Diploma in related technical field.
• Experience: Minimum of 3 years of experience in a sales engineering role, preferably within the equipment sales and service industry.
• Technical Skills: Strong understanding of vacuum pump technology or other technical equipment. Proficiency in technical sales and solution design.
• Sales Skills: Proven track record in achieving sales targets and managing customer relationships.
• Travel:

✅The Supreme HR Advisory Pte Ltd EA No: 14C7279

✅SAMUEL SIAW Reg No: R24124745

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gFzYspmB

• Great opportunity to work for a multi billion tech giant
• Exposure to latest technology in a data center environment

About the company

Our Client is an established company with offices globally. As part of their expansion plan in Singapore, they are looking forward to hire their Network Engineer NOC / Specialist to join their team.

About the job

Your responsibility involves:

• Monitor network performance and ensure system availability and reliability.
• Respond to network alerts and resolve connectivity issues promptly.
• Conduct regular network maintenance and updates to ensure optimal performance.
• Handle network breakfix tasks such as switch replacements, link repairs, and dark fiber restorations, coordinating with technicians to perform physical work and providing remote instructions.
• Perform network troubleshooting to diagnose and resolve network issues.
• Collaborate with the IT team to improve network design and performance.
• Maintain comprehensive documentation of network configurations, issues, and resolutions.
• Support and manage network hardware, including routers, switches, and firewalls.
• Ensure security measures are in place and updated according to best practices.
• Assist in the planning and implementation of network projects and upgrades.

Skills and experience required

As a successful applicant, you will have at least 3 years of experience in network.

Candidates with exposure to VLAN, TCP/IP, BGP, OSPF and OSI will be highly preferred.

Whats on offer
This is an excellent opportunity to join an established MNC.

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gFzYspmB (EA: 94C3609/ R1219669)

Role and Responsibilities:

• Designing, implementing, maintaining, and supporting local and remote portions of the PCI-DSS enterprise financial network.
• Deploy InfoSEC-approved DC architecture based on existing best of breed design and emerging trends.
• Management of Campus/Partner connectivity via LL, VPN (Virtual Private Networks) (IPSEC and SSL (Secure Sockets Layer)) & SDWAN
• SSL/TLS certificate management.
• Application Delivery management via DEV/QA/UAT/Prod support.
• Triage support for all LAN/WAN/Cloud related operations and infrastructure.
• Manage circuit provisioning, activations, and troubleshooting.
• Conducting regular security assessments of the enterprise IT environment.
• Participating in design and strategy meetings for assigned IT projects for the enterprise.
• Evaluating existing communications systems, identifying deficiencies, and making network performance recommendations.
• Installing and configuring Physical Servers, Host VM’s and Data/Voice Communications equipment as needed inside the APAC region offices and datacenter’s.
• Responsible for performing off-hours maintenance as required.

Required Skills:

• Network+/KCA/CCNA/CCNP/NSE4/CISSP preferred.
• Conversational competency in Cantonese and/or Mandarin to work with APAC partners and providers.
• Bachelor’s degree or equivalent education and/or experience.
• IPS (Intrusion Prevention System), DDOS (Distributed Denial of Service), 802.1X, NAC (Network Access Control), ISE, AV implementation experience.
• ISO 8583, PCI-DSS, GDPR (General Data Protection Regulation) compliance and standardization knowledge a plus.
• Scripting in TCL, knowledge of VMware ESX, Coralogix, Netreo, OpsGenie, Wireshark/PCAP analysis, ELK, Wazuh, Fortinet Fabric technologies (client, sandbox, gate, analyzer, VDOM’s/ADOM’s., AP’s)
• Dynamic Routing knowledge of OSPF, iBGP, eBGP
• F5 LTM VE (Virtual Edition) Knowledge, iNAC/eNAC knowledge
• Knowledge of HPE (Hewlett Packard Enterprise), Dell, Cisco Switching Checkpoint/SPLAT familiarity.

Create, deploy, maintain and troubleshoot F5 ASM policies for new and existing web applications

Configure and manage WAF configuration for Azure/AWS cloud WAF.

Review vulnerabilities that impact web applications and develop WAF "Virtual Patching" solutions.

Monitor and analyse activity logs to detect malicious internet traffic and indicators of compromise as well as to reduce false positive blocks

Review WAF usage and define means to improve and mature protection policies Understand web applications at a sufficient level to work with developers to implement protective controls that may need to be customized for specific applications

Interpret web protocol information to determine source, intent, and risk of threat agents

Provide preventative maintenance, troubleshooting and quickly resolve problems to ensure infrastructure and application stability

Participate in technical design activities to ensure a sound design and any infrastructure impact is understood

Create and maintain technical documentation regarding the WAF infrastructure including network diagrams, policies and operational procedures for managing the infrastructure.

Work closely with developers and security team to ensure security requirements are met and web-applications are adequately protected from cyber-attacks

Review vulnerability scan output and assess where WAF configuration can be used to mitigate attacks.

Basic understanding of data flow technologies such as routing, natting, arps and associated command line tools such as tcpdump

Awareness of mainstream operating systems and a wide range of security technologies including network firewall, IPS, and web proxy.

Experience and skills requirements

Technical experience

Full understanding of the application project life cycle and process/procedure design. Knowledge and hands-on experience of security tools. Experience in IPS, WAF, Load Balancers, Firewalls and Network Security

Experience in Application Security and Technologies

Experience in security vulnerability scanning. Experience with audit event collection and reporting toolsets

Certification

Security Qualifications preferred e.g. F5 CTS-ASM/CISSP/CISM/ISC2/CEH or equivalent

Added advantage with the following:

Proven analytical and problem-solving abilities.

Ability to conduct research into IT security issues and products as required. Self-motivated and directed.

Keen attention to detail.

• Working Location: AMK@Link (Yio Chu Kang MRT)
• Working hours: 8.30am to 6.15pm, 5-days week
• Salary Range: $4,500 - $6,000 + AWS + Variable bonus

Responsibilities:

• Work closely with other domain specialist to design complex solutions
• Analyze business requirements to develop technical solutions and system design
• Generate solution design, project document and Bill of Material for customer requirement
• Conduct in-house evaluation and Proof of Concept trial with stakeholders
• Liaison with principal vendors to understand their products, solution and pricing
• Assist the project engineers during Technical Project implementation and conduct of training
• Handle system administration, network support, implementation, troubleshooting in Windows / Linux
• Perform network troubleshooting to isolate and diagnose network problems
• Upgrade network hardware and software components as required, while ensuring adherence to Cybersecurity Act, Cybersecurity Code of Practice(CCOP)
• Expected to address any ad hoc activities when needed by the technical team
• Document functional requirements / specifications documents for all the necessary systems pertaining the network designed or implemented and the necessary routing
• Be familiar with latest Networking trends and solutions available in the market
• Undertaking Vendor Certifications as required by company to maintain partnership status

Requirements:

• Bachelor Degree or Diploma in computer science or related technical discipline
• At least 3-5 years’ experience in network design and planning
• Very comfortable Familiar with Microsoft Windows and in LINUX operating environment (Ubuntu, Red Hat, etc)
• Min. 3 years experience in complex project implementations;
• Strong understanding of cyber security, cryptography, security protocol, network security, TCP/IP networking.
• Strong understanding of Risk Management, Disaster Recovery, Business
• Continuity and IT Regulatory Compliance
• Experience in architecting or deploying Virtualization solutions for enterprises would be advantageous
• Understanding the on-premise / hybrid and cloud networking model
• Ability to work independently with minimal supervision.
• Hands on experience in installing hardware such as servers, network switch, cables, hubs, routers, and setting up required software environment / applications
• Solid CCTV and Audio / Video knowledge and experience
• Experience with IP communication technology such as IP PBX, video conference and network management system
• Possess certifications like CCNP Routing & Switching, CCNP Wireless, CISSP or equivalent on Networking and Security technologies would be an added advantage.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

System & Network Engineer

Working Location: Yio Chu Kang MRT

Working hours: 8.30am to 6.15pm, 5-days week

Salary Range: $4,500 - $6,000 + AWS + Variable bonus

Responsibilities

• Work closely with other domain specialist to design complex solutions
• Analyze business requirements to develop technical solutions and system design
• Generate solution design, project document and Bill of Material for customer requirement
• Conduct in-house evaluation and Proof of Concept trial with stakeholders
• Liaison with principal vendors to understand their products, solution and pricing
• Assist the project engineers during Technical Project implementation and conduct of training
• Handle system administration, network support, implementation, troubleshooting in Windows / Linux
• Perform network troubleshooting to isolate and diagnose network problems
• Upgrade network hardware and software components as required, while ensuring adherence to Cybersecurity Act, Cybersecurity Code of Practice(CCOP)
• Expected to address any ad hoc activities when needed by the technical team
• Document functional requirements / specifications documents for all the necessary systems pertaining the network designed or implemented and the necessary routing
• Be familiar with latest Networking trends and solutions available in the market
• Undertaking Vendor Certifications as required by company to maintain partnership status

Requirements

• Bachelor Degree or Diploma in computer science or related technical discipline
• At least 3-5 years’ experience in network design and planning
• Very comfortable Familiar with Microsoft Windows and in LINUX operating environment (Ubuntu, Red Hat, etc)
• Min. 3 years experience in complex project implementations;
• Strong understanding of cyber security, cryptography, security protocol, network security, TCP/IP networking.
• Strong understanding of Risk Management, Disaster Recovery, Business
• Continuity and IT Regulatory Compliance
• Experience in architecting or deploying Virtualization solutions for enterprises would be advantageous
• Understanding the on-premise / hybrid and cloud networking model
• Ability to work independently with minimal supervision.
• Hands on experience in installing hardware such as servers, network switch, cables, hubs, routers, and setting up required software environment / applications
• Solid CCTV and Audio / Video knowledge and experience
• Experience with IP communication technology such as IP PBX, video conference and network management system
• Possess certifications like CCNP Routing & Switching, CCNP Wireless, CISSP or equivalent on Networking and Security technologies would be an added advantage.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Electrical Project Engineer / Licensed Electrical Worker (LEW)

• Working Hours: Monday-Friday [ 830am - 530pm ]
• Address: Bukit Batok
• Salary: $3,500-5,000

Requirements:

• Degree in Electrical Engineering (Major in Power)
• Prefer with Class 3 driving license

Responsibilities:

• Preparation of technical specifications.
• Carry out site inspections on LT and HT installations per EMA requirements.
• Assist PE/ LEW to carry out switching of electrical panels.
• Standby and attend emergency call up services at customer installations.
• Prepare incident reports, technical proposals, etc.
• Site supervision of sub-contractors on maintenance works.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Job Description & Requirements

• Plan, execute, monitor and control the various technical aspect of the project.
• Manage or participate in new setup or upgrade of system/network infrastructure projects.
• Responsible for supporting operational systems satisfying contractual Service Level Agreement
• Perform and manage routine preventive maintenance and operational activities
• Provide project documentation and reports
• Diagnose and rectify technical issue
• Managing and Operating Red Hat Linux, Windows VM Infrastructure
• Installation/Configuration/Hardening/Maintenance/Patching
• Maintain System Security
• Advanced Troubleshooting
• Performance Tuning
• Capacity Management
• Preventive/Proactive Support
• Incident/Change/Problem Management
• Provide system administration support and guidance for development team’s app configuration tasks
• Veritas Clustering Setup on RHEL VM would be added advantage
• Chef Automation would be added advantage
• AWS EC2 maintenance
• Managing and Operating VMware vSphere IT infrastructure

At InnoEdge, we work with organisations to protect them from cyber threats. We help detect new unknown cyber threats through research, fortify networks, and defend critical information infrastructures. Based in Singapore, our team consists of cybersecurity experts who use the advanced techniques and technologies to deliver cutting-edge solutions and services.

InnoEdge believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Collaboration is key to our success. We prioritise open communication, constructive feedback, and a willingness to help others. We are committed to creating a supportive work environment that encourages excellence, innovation, and continuous improvement. We're looking for individuals who share our values and are excited to join us on our cyber mission.

Responsibilities:

• Design, build and deploy high performance web applications and APIs
• Design client-side and server-side architecture
• Build the front-end of applications through appealing visual design
• Develop and manage well-functioning databases and applications
• Write high-quality code with unit, functional and end-to-end tests
• Perform architectural/technical design, technical prototyping, development, and reviews
• Communicate and negotiate technical solutions and architectural designs with diverse stakeholders
• Lead technical work and integration efforts across teams and products
• Staying abreast of developments in web applications and programming languages
• Provide technical mentorship to junior staff in the team.
• Perform occasional travel to remote sites to assist the support engineer in troubleshooting, or to accompany the product manager as a pre-sales engineer

Requirements

• At least 5 years of hands-on experience in modern web apps using JavaScript/Java/python or relevant experience in a software development team where the product goes into production
• Be a team player with good communication skills
• Demonstrate ability in full stack deployment of web applications
• Experience in designing and implementing RESTful API design
• Experience in the software development using agile SCRUM
• Experience in the following web application framework software / solution stack:

o Java Spring Boot

o ReactJS (knowledge of VueJS would be considered a bonus)

o Python

o Shell scripting

• Experience in the following would be a bonus:

o Git/Github, Elasticsearch, and Kibana

o Experience with threat hunting, Snort, and Arkime domains

o RHEL hardening expertise

o Networking skills, including configuring switches as network brokers

o Docker containers, development of CI/CD pipeline

o Designing and implementing microservices architecture

If you meet these qualifications and are passionate about software development and cyber security, we encourage you to apply for this exciting opportunity. We offer competitive compensation, a comprehensive benefits package, and a collaborative and dynamic work environment.

Our client specialises in power generation solutions in Asia. This role is pivotal as the engineer will serve as the main point of contact on-site and will act as a technical representative at a Gas Turbine Combined Cycle (GTCC) Power Plant located in Jurong Island, Singapore.

The role is on regular hours from Monday to Fridays, with standby duties for emergencies.

Key Responsibilities:

• Investigate operational issues related to turbines and auxiliary systems, providing urgent solutions with support from the office and engineering headquarters.
• Oversee and coordinate the completion of plant outages, collaborating with customer personnel and internal stakeholders.
• Maintain effective communication with the customer to address technical concerns promptly and efficiently.
• Support maintenance activities, ensuring adherence to health and safety standards while optimizing plant performance.
• Lead troubleshooting efforts for various operational and maintenance-related problems, summarizing findings in clear reports.

Qualifications:

• A diploma or degree in a relevant engineering or technical field, along with over 10 years of relevant experience in the power or process industries.
• Previous experience in plant commissioning, or maintenance of GTCC power plants is preferred.
• Strong technical knowledge in GTCC operations, with excellent troubleshooting skills across mechanical systems, instrumentation, and controls.

To apply online please use the 'apply' function, attaching your updated resume.


(EA: 94C3609/R1442042)

• Tracking conformity certificates, calibration certificates, and plant calibration certificates from external agencies while maintaining the RIN Register and coordinating with QPS for closure.
• Ensuring full compliance of all sub-contractors with the relevant LTA M&W requirements and preparing and submitting weekly and monthly quality reports.
• Overseeing QPS inspections and key activities while ensuring presence during asphalt works for road diversions
• Reviewing shop drawings, coordinating design issues, inspecting new and in-use molds, and managing material orders
• Coordinating production to meet daily targets and preparing inspections with the production supervisor and RTO

Requirements:

• Degree in civil Engineering/ Mechanical Engineering or equivalent.
• At least 5 years of experience in QA/QC roles within the construction industry

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

• Manage and coordinate all lifting activities, including lifting and erection plans for crawler and mobile cranes
• Prepare and review lifting plans, method statements, risk assessments, and safe work procedures, while conducting daily site walkabouts to monitor HSE compliance
• Prepare lifting plans, coordinate site teams, ensure compliance, and liaise with clients and executives
• Conduct site inspections for compliance and coordinate with client and executive teams.
• Supervise construction progress, manage work schedules, coordinate with engineers and consultants (QPS) on technical matters, and liaise with subcontractors for site activities
• Address technical issues, guide supervisors, ensure schedule adherence, maintain quality standards, and resolve problems through site inspections
• Prepare reports and method statements, manage workers for site safety and cleanliness, and supervise site activities closely

Requirements:

• Possess a valid Lifting Engineer certificate
• Degree in Civil Engineering or equivalent
• At least 2 years’ experience in MRT/LTA underground project with diaphragm wall and bored-piling works.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

• Supervise construction progress, manage work schedules, coordinate with engineers and consultants (QPS) on technical matters, and liaise with subcontractors for site activities
• Address technical issues, guide supervisors, ensure schedule adherence, maintain quality standards, and resolve problems through site inspections
• Prepare reports and method statements, manage workers for site safety and cleanliness, and supervise site activities closely

Requirements:

• Degree in Civil Engineering or equivalent
• At least 1 year experience in MRT/LTA underground project with diaphragm wall and bored-piling works.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Conduct feasibility studies, develop design specifications, and support design proposals.
• Create conceptual and detailed designs for automation equipment, including material handling and process automation.
• Produce detailed CAD drawings using Autodesk Inventor or similar software, and release comprehensive design documentation.
• Work with the manufacturing team on Design for Manufacturing (DFM), assembly processes and qualification procedures.
• Assemble, test and qualify prototypes, troubleshooting as necessary to ensure project timelines and budgets are met.

Requirements

• Experienced in designing industrial automation using Autodesk Inventor, with expertise in pneumatics, motion components, DFM, DFA, and GD&T.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568