Job Purpose:

The Procurement Officer will oversee and execute procurement activities with efficiency and precision, ensuring full compliance with the school’s procurement policies and government regulations. This role demands a proactive and detail-oriented individual to provide end-to-end support, promoting transparency, fairness, and optimal resource management throughout the procurement process.

Duties & Responsibilities:

• Administer procurement activities, provide end-to-end support and advice to internal requestor on procurement procedure, guide them through the entire procurement process.
• Review and prepare procurement documents for publication, evaluation, award recommendations etc. Check and ensure quotation bids are evaluated fairly and in strict compliance to the school’s procurement procedure and Government Instruction manual (IM).
• Perform transactions on GEBIZ, publishing quotation, raising award, issuance of Purchase Order (PO), contracts and etc.
• Liaise with internal requestor on contract management, track and timely complete all purchase request assigned.
• Support internal officers on administrative duties such as information collation, filing of documents etc. Perform any administrative task or other ad-hoc duties as assigned.

Requirements:

• A Diploma or Degree in Business, Supply Chain Management, or a related field.
• At least 2 years of experience in government procurement.
• Familiarity with GeBIZ e-procurement system and other procurement tools.
• Knowledge of government procurement procedures is highly advantageous.
• Strong analytical and problem-solving skills with a meticulous eye for detail.
• Proactive, self-motivated, and able to work independently or collaboratively in a team.
• Excellent communication and interpersonal skills, with the ability to influence stakeholders across all levels.

(a) Responsibilities:

The candidate is responsible for the end-to-end testing activities of an integrated e-payment system. The primary responsibilities would include carrying out the activities in the testing lifecycle including the test

planning, and analyzing business and system requirements.

The candidate will also be responsible for:

• Preparing the test environment, designing, and developing the test cases.

• Preparing the test environment, and executing the test procedures.

• Automating the test solution based on the system design using scripting or programming languages as well as performance tuning.

• Create traceability to requirements, analyze gaps and address them.

• Logging and tracking defects to closure

• Conducting test reviews with internal and external stakeholders.

• Perform root cause analysis for production and user acceptance defects, and address test gaps to ensure test efficiency.

• Develop design documents and user manuals that would effectively describe and provide clear instructions on the test automation solution to the end users including testers and stakeholders.

(b) Qualifications & Requirements:

• Tertiary qualification in Information Technology or Engineering

• At least 3 years’ relevant experience in executing testing and

developing test automation solutions involving devices (UI-based

or embedded) and/or back-office systems with familiarity on the full

system development lifecycle from requirement, development, to

testing and deployment;

• Good written and verbal communication skills;

• Able to work well both independently as well as in a team;

• Certification in software testing preferred;

• Experience in micropayments Fare Collection systems using Smart Cards and in diverse test execution phases (System Integration Testing, User Acceptance Testing, Performance testing) would be an advantage;

Job Responsibilities

• Comply and uphold the integrity of Procurement policy and procedures.
• Performing as a role of Category Specialist, responsible for managing assigned Categories, including but not limited to the understanding of business and drivers for the respective Categories.
• Manages the Source-to-Pay (S2P) process i.e., Sourcing of vendors based on business requirements, initiating ITQ/ Tender, bid clarifications, negotiations, issue PO and facilitate vendor payment.
• Administers Purchase Orders and Contracts in accordance with Procurement policy and procedures.
• Performs analysis and evaluation of vendors’ proposals.
• Negotiates with shortlisted vendors for best prices, delivery time, delivery term, payment term and other Contractual terms.
• Manages vendors, cost, quality and delivery performance.
• Proactively providing support and guidance to stakeholders with regard to Procurement policy and procedures.
• Maintain proper documentation of all purchases and ensure traceability for audit.
• Follow up with vendors to ensure on-time delivery or any discrepancies.
• Build rapport with stakeholders and to identify cost saving opportunities and Term Contracts.
• Support monthly reporting to Management.
• To maintain Contract database and ensure expiring Contracts are renewed timely.

Job Requirements

• A Diploma/ Degree in any discipline.
• Preferably with minimum 5 years of related Procurement experience; experience in Category Management is a plus.
• Resourceful and proficient in sourcing for relevant vendors in terms of price, delivery, and capabilities.
• Sound knowledge of Contract Terms and Conditions.
• Competent and comfortable with negotiations with vendors.
• Ability to formulate Contracts.
• Ability to work independently as well as collaboratively in a team to meet timelines and KPIs.
• Ability to adapt business requirements and acquire Category/ product knowledge through close engagement with stakeholders.
• Meticulous with details and accurate with numbers.
• Possesses a proactive and strategic mindset with hands-on attitude.
• Takes ownership of given tasks and maintain the highest standard of integrity and professionalism.

Only shortlisted candidate will be notified.

To apply, please visit to www.gmprecruit.com and search for Job Reference: 25016

GMP Recruitment Services (S) Pte Ltd | EA Licence: 09C3051 | EA Personnel: Jaremy Ong | Registration No: R1876766

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

Job Title: Procurement Assistant (ID3468)
Location: Jalan Buroh
Working Hours: Mon - Fri: 8:30am-5:30pm
Salary： $2500-$3000

JOB RESPONSIBILITIES
• Issuing, sending of PO via email and keep track of PO for procurement activities.
• Liaising with store to monitor stock inventories required by Operations Unit is in place to avoid any potential material shortage
• Liaising with plant for their requirements.
• Maintain an updated list of current and incoming inventory
• Liaising/correspondence with suppliers to schedule deliveries or to discuss shortages or missed deliveries
• Continuously sourcing of parts/materials as and when required
• Performing Goods received and updating of system
• Maintain records of purchases, pricing, and other necessary data
• Co-ordinating with forwarder for preparing of documents/permit for incoming shipment clearance
• Continuously liaising with Sales and other departments for their new requirement of material/parts
• To negotiable and obtain best price quotes from suppliers based on various Purchase Requisition request within the company
• Deals with defective goods damaged goods as and when required
• Performing monthly stock take
• Any other ad hoc jobs assigned

REQUIREMENTS
• Minimum 1 years of working experience in procurement.
• Management skill and ability.
• Self-motivated and able to work independently.
• Good communication skill.
• Good command in English, both verbal and written.
• Computer literate.
• Can start work immediately

• 5+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

Job responsibilities

• Create and manage Purchase Orders (PO) in SAP based on approved procurement requests.
• Perform Goods Receipt Note (GRN) in SAP, ensuring goods and services are received in line with the POs.
• Collaborate with internal teams to facilitate timely and accurate procurement activities.
• Resolve discrepancies between POs, deliveries, and invoices in coordination with relevant departments.
• Ensure adherence to procurement policies, financial regulations, and internal controls.
• Maintain accurate records of POs, contracts, and related documentation in SAP.
• Work closely with the finance team to reconcile procurement transactions and ensure timely cost bookings.
• Generate procurement reports and provide actionable insights based on data.
• Assist with internal and external audits related to the procurement process.
• Perform other ad-hoc tasks as assigned.

Requirements:

• Bachelor’s degree in Business Administration, Accounting, Finance, or a related field.
• Diploma or equivalent qualification in Business, Accounting, Finance, or a related field, with 3-4 years of relevant experience, preferably in an MNC environment.
• Proficiency in SAP (accounting software) and Microsoft Excel; prior experience with SAP is highly preferred.
• Strong problem-solving skills and the ability to work independently.
• Highly organized with excellent task-tracking capabilities to meet deadlines.
• Detail-oriented with a strong focus on accuracy.
• Excellent communication and interpersonal skills.

Location : Changi

Salary : Upto $4,000.00

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform that only shortlisted candidates will be contacted.

Interested candidates, please forward your resume to [email protected]

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tac and the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries

• 5+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

• 7+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

Duration: 1 year contract

Location: Near to One-North MRT

Working hours: Mon – Thurs: 8:30am – 6:00pm, Friday: 8:30am – 5:30pm

Responsibilities

• Support Deputy Director / Head in management and administration of Whole of Government (WoG) Demand Aggregated (DA) contracts.
• Duplicate of WOG DA contracts from Gebiz into iLMS.
• Work with Ministry of Home Affairs decentralized cataloging agencies in assigning of material and services numbers to the WOG DA contracts items.
• Work with Ministry of Home Affairs cataloging authority in managing the material and service master.

Requirements

• Minimum diploma in Science, Engineering or a related field.
• Minimum 2 years relevant working experience, preferably in the Government sector.
• Experience with SAP and cataloging.
• Experience in procurement management and use of Gebiz would be an added advantage.
• Proficient in MS Word, Excel and PowerPoint.
• Meticulous and attention to details.

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

https://sg.go.persolkelly.com/job/apply/10684

We regret to inform that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394 • Reg No: R23117066 (CHEW KIA ZHENG)

The Procurement Assistant plays a crucial role in ensuring efficient and cost-effective procurement of equipment, services, and supplies for our fleet. This position involves close collaboration with the Purchasing Manager, vessel crew, and suppliers to meet the operational needs of our ships while adhering to company guidelines and industry regulations.

What you will be doing:

• Assist the Procurement Manager in daily procurement activities, handling ad-hoc tasks as required.
• Develop comprehensive plans for acquiring equipment, services, and supplies, considering factors such as cost, quality, availability, and lead times.
• Review existing administrative procedures and systems, identifying opportunities to streamline and improve efficiency in procurement processes.
• Ensure all procurement activities comply with the organization's purchasing guidelines, procedures, and relevant industry regulations.
• Track costs and expenses related to procurement, contributing to the preparation of accurate budgets.
• Arrange timely and cost-effective shipments of stores and spares via air, sea, and road freight to both local and international ports.
• Conduct occasional inventory and storeroom inspections on ships to understand crew needs, maintain positive relationships, and address procurement-related issues.

What we are looking for:

• Minimally a Diploma in supply chain management, logistics, business administration, or a related field.
• Proven experience in procurement, ideally within the maritime or shipping industry.
• Understanding of shipping operations, procurement processes, and relevant regulations.
• Strong analytical, negotiation, communication, and organizational skills.
• Proficiency in MS Office Suite and procurement software.
• Ability to work independently and as part of a team, handling multiple tasks and tight deadlines.

• 7+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

Responsibilities:

• Agree to detailed programmes of work - time chart and representation on site plans
• Check that all necessary drawings and instructions have been given to contractors and authorisations obtained, in accordance with the agreed programme
• Check that materials are ordered in good time and permits OK.
• Check that all construction work is carried out in a safe manner, and that the site is kept secure
• See that requirements of specifications in regard to materials and workmanship are complied with by contractors. This includes sample tests of material and workmanship.
• Watch for faulty workmanship and material incorporated in the works and to issue instructions for rectifications
• Check line and level and layout of structure during erection and that intentions of contract drawings are adhered to
• Check structural slab beam and column sizes and reinforcements placed and that intent of design details are followed
• Keep a record of all measurements and tests and to bring plans into conformity with the work actually executed
• Issue such further instructions and clarifications of details as and when required; and to inform Architect for issuance of Architect's Instruction or Architect's clarification.

Requirements:

• At least 4 to 6 years or more relevant experience in industrial buildings
• A recognised university degree in Civil Engineering
• Able to start in Jan 2025
• Comfortable for Project Site at Tuas South

About Us

Vivo Surgical is a patient-focused, clinician-driven medical device developer and manufacturer. Headquartered in Singapore with offices in China and Thailand, we are pioneering a novel endoscopic surgical robot for complex endoluminal surgeries. ISO 13485 certified with international accreditations awarded such as the US FDA and European CE mark, our devices target the medical needs of the world through innovative applications of science & technology. These encompass such fields as in vivo surgical LED lighting, portable endoscopy and endoscopic robots, which are strategically co-developed with world-class healthcare institutions and KOL collaborators. Join us as we build towards our vision of being Asia Pacific’s leading medical device developer and manufacturer.

About The Role

We value the importance of having a robust engineering team that would serve as a key pillar for sustained commercial success. To that end, we are looking for an Electrical Engineer to join us on this journey. In this role, you will be part of our fast-growing team and will take ownership of your role from the get-go. You will be working on the electrical interfaces of our robot from the design and development phase all the way to manufacturing. You will be developing these solutions alongside our clinical KOLs to produce and test the parts and subsystems that will eventually be integrated into the robotic system. Throughout the process, you will also be involved in the verification and validation testing phase such as producing testers, generating test protocols and reports. Your role will require you to work in close tandem with our external partners and suppliers.

Your responsibilities shall include the following:

• Involved in the establishment of the robotic system’s design requirements according to users’ needs.
• Design and develop hardware system architecture and electrical systems based on set requirements.
• Generate schematics and electrical diagrams following respective standards and best practices.
• Source, evaluate and troubleshoot components, PCBAs, wire harnesses and subsystems.
• Assist in developing test protocols and reports to verify various subsystems and the main system.
• Involved in developing testers and test tools for verification tests.
• Support the team with electrical safety and EMC testing.
• Take part in the design control and risk management documentation generation tasks.
• Work with the team to optimize the system’s cost, manufacturability, quality, and reliability.
• Contribute and watch your ideas materialize into the fast-paced iterations of our system to constantly strive to meet the end users’ needs.

Your Qualifications & Experience

• Minimum Bachelor’s degree in Electrical Engineering, or related.
• At least 3 years’ experience in Electrical, Embedded Systems, Robotic Engineering, or related fields.
• Skilled in PCB design software such as Altium Designer or other similar tools.
• Experience in circuit design with ARM MCUs is essential.
• Hands-on experience with embedded communication protocols such as UART, I2C, SPI, CAN, TCP.
• Knowledge of embedded platforms such as MCUs (STM32), DSP, FPGA will be advantageous.
• Adept at utilizing equipment such as multimeters, oscilloscopes and spectrum analyzers.
• Hands-on experience with soldering equipment and crimpers preferred.
• Knowledge of C/C++ and Linux will be an advantage.
• Understanding of standards such as IEC 60601-1, 60601-1-2 and 62304 will be a plus.
• Strong analytical, troubleshooting, problem-solving, and communication skills.
• Ready to embrace a positive and collaborative mindset to thrive in the dynamic start up environment.

Contact

Please send your CV and cover letter to: [email protected]. We look forward to receiving your application.

• Design new solutions or fixes to enhance existing applications using web-enabled development programs using Java, Angular,SQL/Oracle, XML, and similar or other web services and service-oriented tools.
• Development experience with Java, J2EE, Spring, Springboot, Angular
• Strong development skills using Java and Spring Framework.
• Strong RDBMS skills using SQL,Oracle.
• Stron expereince in Angular.JS and Javascript
• Experience in Python development.
• Participate in the final phases of deploying and performance tuning of the application and help identify performance bottlenecks and suggest work-around
• Manage ad-hoc requests and multiple projects simultaneously while operating in a high tempo environment with ever-changing priorities and tasks.
• Proficient with popular frameworks such as Django, Flask, or Pyramid.
• Design, develop and implement new applications, enhancements, and new features to our products
• Prepare accurate and detailed requirement specification documents, user guides, and functional specification documents

You will be a key member of the R&D Digital Translation team established under the Singapore Maritime Institute. The R&D Digital Translation team develops and operates digital and cyber products and translates R&D projects to real world implementations for the maritime industry.

You will collaborate with various project managers, solutions architect and infra engineers to deliver leading-edge digital solutions and services to meet the business requirements of the maritime community. You are pro-active, self-motivated and resourceful team member with good technical or digital knowledge and possess strong influencing and people handling skills. You are constantly looking at new ways to apply digital technologies to meet business needs and can handle multiple projects concurrently.

Key Responsibilities

1. Design, build and maintain the software development pipeline automation with related toolsets to enable CI/CD

2. Design and implement the infrastructure and operating environment for container-based microservices that will meet the agreed high availability, performance and security requirements

3. Utilise native cloud tools to monitor the health and performance of the production and UAT environments, and automate the alerts as part of the incident reporting framework

4. Work closely with development teams and other internal teams to ensure that solutions are designed in accordance to requirements to facilitate scale/performance, security and operability

5. Work closely with on-site Tenant Facility Management (TFM) team to supervise day-to-day cloud operations which include activities such as regular patching and system configuration

6. Support and ensure that the software releases are aligned with MPA's internal software release and deployment process

7. Facilitate and support troubleshooting or root cause analysis of platform issues or incidents

8. Proactively monitor and identify opportunities for automation, process improvement and architecture simplification

9. Participate in project planning and management activities

10. Research and develop prototype using relevant technologies and trends for continuous improvement of the platform

Requirements

1. Background in IT/Computer Science/Computer Engineering or relevant discipline

2. At least 2 to 3 years of working experience in DevOps automation, containerisation and orchestration

3. Strong knowledge and experience in Microsoft Azure and/or Amazon Web Services and related cloud services (e.g. Azure DevOps, hands-on experience using Azure Administrative portal). Certification(s) in Microsoft Azure (e.g. MCSE: Cloud Platform and Infrastructure or equivalent) and Amazon Web Services will be an advantage.

4. Strong knowledge and experience in software development automation tools

5. Strong scripting skills (e.g. powershell, cli, python)

6. Strong understanding and experience in virtualisation and networking in a container environment such as Kubernetes, Docker

7. Strong understanding of cloud computing/container deployment and management

8. Strong understanding and practice of Agile projects (e.g. SCRUM)

9. Experience in working with Government Commercial Cloud is preferred.

The Site Engineer (Building) is responsible for assisting on the progress of site works and manpower related aspects of the project.

The responsibilities of this position are, and not limited to, as follows:

• Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Adherence to safety practices in the work place.
• Any other duties that may be assigned to you from time to time as your superior / management deem fit.

Qualifications and Education Requirements

• Education: Degree in Civil Engineering
• Experience: Prior 3 years experience in building projects

Responsibilities:

• Assist the project manager with on and off site meeting pertaining to the technical issues
• Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project
• Proven problem solving and achievements work progress according to the work schedule
• Site supervision and able to coordinate well with sub-contractors, RE and RTO

Requirements:

• Candidate must at least a Post Graduate Diploma in Civil Engineering or equivalent
• Min 3 years relevant experience in the related field for this position
• Be able to work independently with minimum guidance
• Good team player, keen desire to learn, contribute, advance and progress with the company

Job Description

Supervision and co-ordination of projects. You will work closely with the Project Team and other technical professionals, regulatory authorities and contracts to ensure that all works coply fully with regulatory and clients' requirements.

Requirements

• Degree in Civil Engineering
• Certification in BCSS
• Minimum 3 years working experience
• Knowledge of Autocad and MS Projects

• Experience in network operations/maintenance and passionate about providing troubleshooting support
• Knowledge on Internet Technologies (i.e. routing, switching and general network infrastructure), and technologies associated with the ISP market
• Strong analytical and problem-solving skills, and has a flair for dealing with technical and operational problems
• Experience in IT audit or CISA/CISM certified preferred or operational risk management and control self-assessment or prior experience in implementing security solution and information security governance
• Enterprise Data Network (administration, patching, upgrade and migration activities), Design, Preparing of HLD/LLD, Implementation Team leading, Service Level management, demand, incident, change management.
• Cisco/Aruba Switching /Routing & WLAN
• DDI, AAA/Cisco ISE
• Network Automation: Python & Ansible
• As Built, LLD, Testing & Acceptance Testing Documentation Skills
• ZScaler & Network Security
• Certification: CCNP/CCDA equivalent
• Meraki, Palo alto, f5 loadbalancer, UTP
• Provide network WAN/LAN design, implementation, consulting, Cisco, Aruba, Juniper
• Network audit Identify the gaps and suggest the remedial solution. Supporting in RFP/RFI response.
• Experience in running operations with ITIL processes / Project Management - PMP

• Plan, build and optimize infrastructure setup, design and performance.
• Manage backend information systems, including of virtual machines and virtualization platform, including of network storage, backup, Fibre channel switches.
• In-depth experience in Linux administration. Need to be expert level
• Strong understanding of High Availability setup for Linux/Windows applications (etc. webs, database)
• Strong network fundamentals – IPv4/IPv6 – addressing, NAT, Routing
• Network and Systems troubleshooting and maintenance
• Good to have disaster recovery planning and execution
• Private cloud administration experience is a must – VMWare / Hypervisor
• In-depth experience in DNS, DHCP, Proxies, Linux firewalls & network security is a must.
• Maintain and Administer Security Appliances of different projects
• Design and propose a plan that will improve the hosting service of the Data Center

Summary

Responsible for designing and implementing test hardware and software to validate product functionality, performance, and reliability. Strong problem-solving, organizational, and communication skills are crucial for success in this role.

Responsibilities

• Design, develop, and implement test hardware and software for validating product functionality, performance, and reliability.
• Create automated test systems and procedures to ensure consistent and repeatable test results.
• Develop, troubleshoot, and maintain test fixtures, equipment, and associated software for in-house and production testing.
• Collaborate with design and manufacturing teams to identify and address test-related issues.
• Analyze test data to identify trends, troubleshoot issues, and recommend improvements to product design or test processes.
• Document test plans, procedures, results, and maintenance requirements.
• Ensure test systems comply with industry standards and safety regulations.
• Continuously improve test processes and tools to reduce testing time and increase reliability.

Requirements

• Bachelor’s degree in Electrical Engineering, Electronics Engineering, or a related field from a recognized institution.
• Minimum of 5 years of experience in developing test hardware and software, preferably for complex electromechanical systems.
• Strong proficiency in programming languages such as Python, LabVIEW, MATLAB, or C/C++.
• Knowledge of hardware design and schematic interpretation to develop custom test fixtures.
• Experience with data acquisition systems, signal processing, and instrumentation.
• Familiarity with communication protocols (e.g., I2C, SPI, UART, Ethernet) and interfaces (e.g., GPIB, USB).
• Ability to integrate sensors, actuators, and control systems into test setups.
• Experience in using software tools for simulation, debugging, and automation.
• Ability to analyze complex technical problems and develop innovative solutions.
• Strong troubleshooting skills for both hardware and software in testing environments.

We are looking for an Electrical Engineer with 2-5 years working experience who would have the following experience / knowledge/ qualities :-

• Basic Electrical Building Services Design knowledge
• Familiar with local codes and standards (e.g SS 568, 560 etc)
• Able to perform cable size and voltage drop calculation conforming to local codes and standards. Familiar with earthing and lighting protection works.
• Familiar with CAD software and able to make minor modification independently.
• Self-motivated individual able to lead a team of supervisors and electricians independently.
• Coordinate with Project Team to execute the works including scheduling of works for the team.
• Coordinate and support Project LEW for Power Turn ON, Testing and Commissioning.
• Project progress monitoring & updating to Project Manager
• Able to communicate and present to client on project status etc.
• Able perform Bid Estimation and submission.
• Able to perform material take off from project drawings (e.g. cable containment routing drawings, small power and lighting layout etc)

Requirements

• Min Diploma in Electrical Engineering or equivalent
• Strong technical background with sound knowledge of electrical construction works
• Proficient in MS Office (e.g Excel, Word & Power Point)
• Possess good writing, communication and interpersonal skills
• Drafting knowledge using AutoCAD is an added advantage
• Working in a “Live” process plant is an added advantage.
• Fresh Graduates are welcome to apply

We are looking for an Instrumentation Engineer with minimum 5 years experience who would have the following experience/knowledge/qualities:-

• Familiar with local and international instrument and panel installation standards
• Hands on experience in calibration of instruments
• Able to Perform Loop checks
• Coordinate with Project Team to execute the works including scheduling of works for the team.
• Self-motivated individual able to lead a team of supervisors and Technicians independently.
• Project progress monitoring & updating to Project Manager.
• Able to communicate and present to client on project status etc.
• Able perform Bid Estimation and submission.
• Able to perform material take off from project drawings (e.g Hook up drawings, P&ID, Instrument index, I/O list etc)
• Proficient in MS Office (e.g Excel, Word & Power Point)
• Working experience in “Live” Process plants is an added advantage

The BMS Engineer deployed on site is required to perform planned and ad-hoc maintenance works including supervise the Technicians and Contractors in carrying out the works in specific projects. The BMS Engineer should also possess good communication skills and be able to relate to different levels of people. The BMS Engineer should also be proactive in learning and implementing of new technologies on site. The BMS Engineer will also be holding a concurrent role of TE and will discharge his/her duty accordingly to the requirement of the BMS Engineer.

What you will be doing:

• Perform maintenance services and supervise contractors / vendors in the delivery of equipment.
• Assist in implementing the quality maintenance program and complying with government/statutory regulations
• Assist in managing minor projects or improvement works or repair & replacement (R&R) works and supervise the works
• Prepare and justify for variation of works
• Ensure that works are completed on time and as per contract requirements
• Establish good relations between own team members and building owners
• Ensure all fault cases are promptly followed up and closed in the CMMS / Helpdesk
• Work closely with Client’s FM team to understand the needs and requirements of the end users
• Undertake any other duties as assigned by the Client/ESS team
• On daily basis, follow up on anomalies or faults detected from the use of the BMS to optimize the building equipment;
• Deep dive into building function and equipment to improve energy efficiencies and eliminate intermittent faults, derive new fault rules specific and relevant to the Sites; and
• Manage, operate, configure, modify and perform troubleshooting on the BMS system.

You are:

• Possess a diploma in Building, Facilities, Engineering or relevant disciplines from a recognized establishment with a minimum 3 years of relevant working experience in BMS.
• Minimum of 5 years of relevant working experiences in facility management works
• Trained in Building Management System
• Fluent with Microsoft Office

Why join Cushman & Wakefield?

As one of the leading global real estate services firms transforming the way people work, shop and live working at Cushman & Wakefield means you will benefit from;

• Being part of a growing global company;
• Career development and a promote from within culture;
• An organisation committed to Diversity and Inclusio

We have a vision of the future, where people simply belong.

That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, gender, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status. We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us.

Electrical Engineer Responsibilities:

• Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.
• Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.
• Conferring with customers, engineers, and others to discuss existing or potential engineering products or projects.
• Ensuring that installation and operations conform to standards and customer requirements by preparing electrical systems specifications, technical drawings, or topographical maps.
• Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.
• Ensuring compliance with specifications, codes, or customer requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.
• Writing reports and compiling data regarding existing and potential electrical engineering projects and studies.
• Preparing specifications for purchases of electrical equipment and materials.
• Supervising or training project team members.
• Estimating material, labor, or construction costs for budget preparation.
• Maintaining electrical equipment.
• Working with a variety of technicians.

Electrical Engineer Requirements:

• Bachelor's degree in electrical engineering degree from an accredited school.
• Licensed as a professional engineer.
• Experience in using or a desire to learn the required software.
• Knowledge of applicable codes related to electronic engineering.
• Proficient in design and calculation software.