Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Responsibilities:

• The 1st Level Remote Support is required to provide 1st level troubleshooting to users queries/incidents received (regardless of source; in a professional and timely manner)
• Provide First Call Resolution (FCR) technical support via phone and email.
• Ensure calls are answered and emails are responded in a timely manner.
• Perform first level troubleshooting on all reported incidents and escalate incidents to 2nd level resolver groups as per work instructions.
• Furnish and submit timely updates to customers on the status of outstanding issues within targeted Service Level
• Maintain ownership of cases and follow-up on reported issues until closure and gather accurate and complete relevant information is recorded.
• Manage customer expectations and notify Team Lead in the event of unusual surge in calls of a specific nature.
• Handle initial classification/ prioritization of the incidents. Track the progress of resolution and provide regular updates for follow-up actions and incident status.

Requirements:

• Min Higher Nitec in any discipline
• Min1 year End user support experience, Desktop or Technical Service Desk.
• Knowledge in Windows OS, Active Directory Account Administration, MS Outlook, mobile devices support.

ABOUT SEMBCORP INDUSTRIES
Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.
Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.
Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries*.
Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.
Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

Purpose and Scope
The C&S Engineer plays a pivotal role in managing the Civil & Structural aspects of the projects which is crucial to the successful delivery of building projects.

Roles & Responsibilities:

• Responsible for projects management, planning and design works
• Meeting clients & services providers on scope of service and conduct field surveys
• Handling project evaluation, budgets, documentation, technical specification and coordination
• Conduct analysis and selection of systems; evaluate project budgets
• Complete design documents & technical specifications
• Work coordination with other disciplinary teams including architectural, mechanical and electrical
• Assist in e-Submission to authorities for utilities services and related building regulatory submissions

Requirements:

• Degree in Civil Engineering accredited by Professional Engineer Board, Singapore.
• Minimum 3 years of experience in the industry, preferably in consultancy firm
• Able to work independently with minimal supervision
• Singaporean only

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses, and functions.
• Accountability – Hold team and self-accountable to deliver on our commitments.

Our client provides solutions from industries like pharmaceuticals, medical devices, automotive, electrical, industrial, and consumer goods.

• Assemble, troubleshoot, and install stations, ensuring correct pre-alignment and machine performance with support from the Manufacturing Manager.
• Deliver technical training to customers on hardware, pneumatics, setup, and maintenance processes.
• Assist with installations at customer sites and create project documentation.
• Collaborate with Project Engineers to meet deadlines, budgets, and share technical challenges.

Requirements:

• Nitec in Mechanical/Mechatronics engineering
• At least 3 years of experience in the automation or machine building industry.
• Familiar with project documentation and preparing manufacturing documents.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Project Engineer
Working hours: 5.5 days (8am – 6pm)
Salary: $3500 - $5000 (Depends experiences)
Location: Island-wide (Depends Project Location)

Responsibilities:

• Manage the transmission of documents and drawings to the client and subcontractor to ensure the updated drawings are issued.
• Prepare method of statement and work procedure
• Conduct weekly or monthly meeting with sub-contractors to update progress of work
• Ensure quality of work is achieved and all government and safety regulation are complied
• Oversee drawing management and control of technical documentation
• Manage procurement of resources, monitor and control material usage on site to avoid unnecessary wastage or wrongly usage.
• Assist the Project Manager or Senior Project Engineer in co-ordination with consultants on change order issued and liaise closing with the Quantity surveyor by providing necessary supporting documents on the change order
• Organize labor, equipment and material for day to day site activities
• Carry out material receiving inspection and maintaining material record. All delivery order are to be return to office for record
• Prepare daily and monthly progress report, perform and maintain inspection record.
• Any other duties assigned

Requirement:

• Min 2 years of relevant experiences
• At least Degree Holder in Civil Engineering

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Project Engineer

Basic: $2,700 - $3,800
Working Hours: 5 Days Mon-Fri (830am to 530pm)
Location: Jalan Kilang Timor, Redhill (Office) / Current project - Jurong or Woodlands Area

Responsibilities

• Able to manage project with minimal supervision;
• Attends external project kick-off meetings, meetings with clients or consultants as well as technical and co-ordination meetings, project meetings and internal project closure meeting;
• Ensures the adherence to the safe work procedure (SWP) established; and implement risk control measures;
• Resolves site problems proactively in a timely manner;
• Ensures the timely preparation of project progress and other reports;
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation;
• Co-ordinates daily activities of workers’ duties and to ensure that they are performed in a proper manner;
• Makes daily checks on work progress, housekeeping and safety implementation on site with safety personnel;
• Assists in cost control by reducing materials wastage, usage of tools and equipment, etc;
• Request and initiate orders of materials required for projects;
• Documentation on project progress and damage;
• Ensures proper project documentation including email communication;
• Any other related duties as assigned.

Requirement

• Degree in Mechanical Engineering or. Diploma in Mechanical Engineering with working experience.
• Able to read construction drawing.
• Training Provided

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Job Description

• Develop control solution related to Semiconductor equipment.
• Design electrical system includes interlock, power distribution, digital/analog signal, I/O, etc
• Manage external vendors or contractors to deliver sub-systems that meet design specification and reliability
• Responsible for equipment safety, manage equipment compliance and certification on standards such as SEMI, CE, etc
• Integrate and test subsystems

Requirement

• Bachelor’s Degree in Electrical Engineering or equivalent
• At least 5 years working experience in capital / semicon equipment electrical system design
• Familiar with AC & DC application, motors, sensors, etc
• Experience in semiconductor equipment industry or high precision automation equipment industry
• Familiar with communication protocol, such as Ethernet, RS232, etc
• Working knowledge of electrical systems including motion, temperature measurement, PID loops, and safety interlock circuits.
• Strong diagnostic skills and capable of resolving electrical noise, grounding, and signal integrity issues
• Experience in Electrical CAD tools
• Experience in PCB design is an advantage

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg
Please include your availability, expected salary and reason for leaving current job
We regret that only shortlisted candidates will be contacted
EA: 94C3609 / Reg: R1325913

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries*.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

Purpose and Scope

The Contracts Engineering team plays a pivotal role in managing the financial & contractual provisions which is crucial to the successful delivery of building projects.

Responsibilities:

• Manage the financial & contractual provisions of all projects from pre-tender to post contract phases including quantities, variations, cost estimates, monthly claims, final accounts etc
• Work closely with Project Manager in preparing monthly updated project costing
• Develop suitable subcontract conditions for specific project requirements
• Prepare project budgeting and costing reports
• Responsible in cost estimating, quantity take off, claims preparation, variations and final accounts.
• Review of contracts, prepare tender & contract documentations, tender analysis & reporting, measurement etc
• Review sub-contractors claims and materials on site
• Standardize all agreements (e.g. subcontracts and joint ventures) with alignment to contract policy

Requirements:

• Degree in Building/ Construction Management/ Quantity Surveying or its equivalent.
• Minimum 3 years of relevant experience in construction industry.
• Strong in negotiation skills.
• Good understanding & knowledge of contracts law and its application.
• Preferably well versed in various form of contracts such as PSSCOC, SIA and FIDIC as well as other international form of contracts.
• Preferably conversant in using CostX and/or Glodon Cubicost measurement software.
• Strong communication and presentation skills.
• Only Singaporean

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

Institution-first Mindset – Put the interest of the Group ahead of individual interests.

Collaboration – Deliver through collaborating across markets, businesses, and functions.

Accountability – Hold team and self-accountable to deliver on our commitments.

Responsibilities

• Collaborate closely with engineers to support Dry Etch process development.
• Analyze test data and set parameters for material and process specifications.
• Lead and coordinate reviews with engineering/scientific teams to ensure processing techniques align with design requirements.
• Innovate and implement new or enhanced process formulations, defining equipment needs and assessing production methods for effectiveness.
• Plan and lead projects focused on introducing new concepts, advanced automation technologies, and improved process strategies.
• Partner with cross-functional engineering teams to identify and resolve integration and process issues.

Requirements:

• Bachelor’s degree in Chemical Engineering, Materials Science Engineering, or a related field.
• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication abilities with good interpersonal interactions.
• Detail-oriented, organized, and a resourceful team contributor.
• Self-driven and capable of working with minimal supervision.
• Project management skills are highly advantageous.
• Comfortable working in a cleanroom environment.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QVRX6Y98

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gxuq4dY5

• Permanent role with an established company
• Exposure to wide range of technologies including cloud

About the company

Our Client is an established company within their industry. They have a well-established presence of more than 20 years with a global footprint of more than 5 countries. With rapid expansion plan, they are now looking for a .net Software Engineer to join their team.


About the job

Reporting directly to the Head of Software Development, your responsibility includes:

• Develop and maintain web/mobile applications and microservices.
• Collaborate closely with vendors, business users and project team for
• applications requirement gathering and development.
• Provide user support for key applications.
• Manage IT projects.
• Evaluate and propose suitable alternatives for software architecture, designs and implementations.

Skills and experience required

As a successful applicant, you will have at least 3 years of experience in C# / .net core. Experience to .net core is required for this role.

Candidates with exposure to cloud, devops, Angular, Vue or React will be of added advantage

Whats on offer
This is an excellent opportunity to join an established end user environment with exposure to latest technology.

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gxuq4dY5 (EA: 94C3609/ R1219669)

Located at Chai Chee

Precision industry (Clean room)

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to become Leader

Requirements

• Diploma in Precision Engineering
• No experience required

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

COMPANY DESCRIPTION

About the Company

JERA Global Markets (JERAGM) is a leading utility-backed seaborne energy trader specialising in LNG, coal and freight. A joint venture between majority shareholder JERA Co., Inc. and EDF Trading, JERAGM's shareholders are among the world's major utilities.

JERAGM operates one of the largest energy portfolios in the world which gives it an in-depth understanding of the way local, regional and international energy markets behave. Its in-depth knowledge and market insights enable us to capture trading opportunities, optimise portfolios, create value and enhance security of supply for our customers.

Headquartered in Singapore, JERAGM has a global talent pool of close to 300 people across offices located in four strategic locations: Singapore, Japan (Tokyo), the UK (London) and the US (Houston).

JERAGM is strongly capitalised with over US$500 million in paid up capital and a total equity of US$4 billion. JERAGM has retained its A+ Stable rating from R&I, attributable to a robust business model and solid financial base.

RESPONSIBILITIES

JERA GM is implementing a series of new IT systems to reduce its reliance on its shareholders for IT services and to enable the rapid growth into a global leader in the trading of fossil fuels.

At the core of the system landscape is a set of vendor systems that support critical business activities such as trading, risk management, pricing, and logistics. JERA GM have and will continue to make significant investments building on top of these systems to tailor them to the specific needs of its business. Up until now, this work has been performed by teams of consultants. JERA GM would like to develop an in-house capability, so they can be self-sufficient in the ongoing development on this platform.

This in-house capability needs to be able to extend, customise, configure and integrate these systems to meet the ongoing needs of the business. They will also support the development of new bespoke systems, such as for business intelligence and decision support, to meet needs not provided by the vendor systems.

The Core Platform Software Engineer will:

• Work to obtain excellent business knowledge of the full transaction cycle within a multi-commodity energy trading environment such that they can converse directly with users and other stakeholders with minimal hand-holding from Business Analysts.

• Develop new features on the company's credit system (Cubelogic) and ETRM (Energy Trading and Risk Management) system to support the company's growth (new products, new processes), in a Python/Azure (Databricks & ADF)/C# / SqlServer environment.

• Demonstrate a broad set of technical skills including expert database development and administration, Python/.NET/C# development and Powershell Automation/Devops skills.

• Build new features on the various applications that revolve around the Cubelogic/ETRM (APIs, loaders, reports, BI). It is most important that they have the ability and desire to rapidly pick up a diverse range of technical skills to support challenges as they arise. They will be actively required to work with challenges using technologies such as Azure IaaS/PaaS, Python, Databricks, Power BI.

• Apply their strong software engineering skills to:
  • Improve the ability to integrate vendor systems together.
  • Improve the ability to unit test customisations of vendor systems.
  • Improve the structure the source of such customisations.

• Work with JERA GM IT to evaluate the quality of the existing vendor system customisations and build out a prioritised backlog of improvements. Work to then safely improve the code estate to improve its flexibility and maintainability.

• Support efforts to improve end-to-end test automation and continuous integration across the application estate.

• Have a strong engineering focus and eye for high quality delivery. They will be expected to deliver high quality software and adhere to modern software engineering practices. They must also be driven to automate everything as this is ingrained in the culture of the team.

• Work within a hybrid internal/consultant/vendor team to deliver a backlog of new features, enhancements, bug fixes and integrations to support the ongoing needs of the LNG and Coal trading businesses. Demonstrate a strong ability to self-organise when required.

• Work collaboratively with the rest of the JERA GM technical team, whilst also demonstrating end-to-end ownership of entire problems where required.

• Show a highly proactive attitude in learning and immersing themselves in the vendor platforms with the aim of gaining an expert knowledge of how to develop and support extensions and integrations.

• Be comfortable with agile delivery modes such as Scrum or Kanban but also be flexible to work with whichever delivery approach works best for the problem at hand.

• Provide 3rd line production support.

Skills and Experience required

• 5-10 years of overall experience with advanced level of coding experience in either Python or C# with good knowledge of other.
• Strong experience in SQL, & PowerShell
• Modern cloud-based system architectures and technologies such as Data Lakehouse using Databricks, Azure functions and ADF
• Experience with C# .NET
  • Good understanding of the core language and framework
  • Service oriented development (WCF, Rest API, GraphQL)
  • Data access development (ADO.NET, EF or equivalent such as NHibernate)
• Extensive SQL Server database design and development skills (excellent SQL skills assumed). A good working knowledge of database performance optimisation is also required.
• Familiar with knowledge of Azure services including VNET, Key-Vaults, Azure Data Factory, ADLS Gen2, Virtual Machines, App Services, Storage Accounts and Azure Active Directory
• Orchestrating data pipelines using Azure Data factory
• Strong conceptual understanding of Big Data, Map-Reduce, Spark, file formats such as Parquet, Avro, ORC etc.
• Reporting tools such as Power BI
• Knowledge of JavaScript/UI framework like Angular/React.
• Cloud experience in Azure or AWS
• Experience with Windows Server infrastructure
• Experience working with agile delivery methodologies such as SCRUM or Kanban.
• Experience with Microsoft-based BI stack, including SSIS, SSRS and Power BI is desirable.
• Experience with Azure PaaS and IaaS and corresponding automation toolkits is desirable.
• Experience in Allegro ETRMs is desirable.
• Experience in Cubelogic is desirable.
• Proven work experience in the energy trading, commodities trading or corporate banking sector

• Highly motivated to continually develop skills and techniques to ensure the best tools are used for the job. Support, resources and technical mentoring will be provided by JERA GM as required.

• Highly motivated to deliver results and ‘go the extra mile' to meet deadlines.

• Able to multi-task with minimal supervision and highly structured and organised in the way tasks are approached.

• Excellent communication skills.

• Strong academic background, educated to degree level and/or equivalent professional qualification or relevant business experience.

AI based maintenace & Reliability Optimization Engineer:

Develop engineering solutions to overcome repetitive failures and other problems that adversely affect plant operations.

Manage and supervise a team of Calibration/E&I Technicians to perform instrument calibration and instrument maintenance activities

• Support maintenance operations and shutdown activities by working with Supervisor and Engineer on developing the annual PM plan, setting work priorities; scheduling PM activities, coordinating and resources planning to meet the schedule in cost-effective way.

Drive Sustainability: Lead initiatives for waste reduction, carbon emissions, and water conservation; assess and adopt renewable energy solutions for the manufacturing plants in semi conductor and petrochemical sectors

Continuous Improvement: Apply data-driven approaches to improve asset reliability and sustainability, integrating best practices across the manufacturing plant.

AI-driven predictive maintenance improves operational efficiency by optimizing maintenance schedules and resource allocation. Analyzing real-time data and predictive analytics allows AI algorithms to prioritize tasks and allocate resources more effectively.

Requirements

• Bachelor’s in reliablity engineering or related field

• ⁠Ability to garner technical insights from large engineering data sets using analytical tools and concepts; making competitive

• Minimum 3 years in reliability engineering, energy management, or sustainability within manufacturing

Provide 1 st and 2nd level support  Technical assistance and support for incoming IT Helpdesk and End User desktop queries and problems.  Laptop/desktop/peripherals hardware and software technical support.  Windows 7/10, Windows server, file/print/scan services, Outlook/Office 2016, Office365 suite, 2FA, LAN\WAN/Wireless network connectivity, VPN, mobile devices, meeting room audio/video conferencing systems, PABX and basic application troubleshooting.  Perform PC/Laptop Refresh, Onboarding and off boarding of users and ensure asset inventory tracking is updated.  Escalate issues to OEM/vendors and follow-up until the resolution of the problem.  Out-Of-Office-Hours On-Call support. 2. Systems administration and maintenance  Provide Wintel server, Active Directory, GPO, WSUS, Software deployment and system administration.  Liaise with external vendors for any related hardware/software maintenance and services.  Perform Installation/Configuration/Monitoring/Patching/Upgrades of desktops, servers, operating systems, antivirus, databases and other system related software.  Participate in disaster recovery testing. 3. IT governance & documentation  Involve in regular review and update of infrastructure policies, procedures and system documentation to ensure compliance.  Plan and conduct end-users training as needed.  Conduct quarterly IT asset counts.

At least 2 years of working experience in IT helpdesk providing 1st level and 2nd level end user desktop support. 2. Strong experience in End user hardware and software technical support, Windows 7/10, Office 365 administration and Active Directory. 3. Good to have networking, storage and some database administration experience. 4. Able to work on a rotating 2nd level Out-Of-Office-Hours support On-Call basis. 5. Knowledge of ITIL operation. 6. Strong analytical skills, ability to work independently and in a team environment. 7. Possesses good attitude, good interpersonal and communication skills. EDUCATION 1. Degree/Diploma in Electronic/Computer Engineering or Computer Studies or equivalent. 2. Good to have ITIL foundation certification. 3. Good to have Microsoft 365 or MCSA certification

1. AUTHORITY

• In charge of the operational procurement process for ship’s requirements.

2. GENERAL RESPONSIBILITY / TASK DESCRIPTION



▪ Negotiate / communicate with suppliers specifying quality, quantity, and delivery schedules

▪ Schedule, arrange, and follow-up on logistics to ensure cost effective and timely delivery of

items on board

▪ Monitor schedules of the assigned group of vessels to optimize deliveries on board

▪ Proactively participate in department meetings and other activities



3. EXECUTION

▪ Processing ship’s requisitions via the defined in Company Procurement procedures

▪ Evaluate bids and make recommendations based on commercial and technical factors

▪ Create and send purchase orders after approval

▪ Prepare items for shipment, arrange for transportation of product and coordinate shipments of

supplies to ships

▪ Update good receipt for each order

▪ Processing of invoices belonging to the orders she/he has created and/or are related to her/his

group of vessels

▪ Liaise between suppliers, relevant internal departments and vessels

▪ Other procurement tasks as delegated by the Procurement Manager

▪ Interacts with ships to identify and meet requirements / problem resolution and to accommodate

short lead-time orders

▪ Request and process vessel feedback on quality and timing of deliveries of goods and services

▪ Provide information to the Procurement Manager on various monthly / weekly reports as

relevant

▪ Coordinate with appointed freight forwarder and monitor stock list at regular intervals

▪ Ensure that Procurement policies and standard procedures are adhered to at all times

4. REPORTING LINE (FUNCTION REPORTS TO)

• The Procurement Executive reports to the Procurement Manager.  

5. Requirements:

• Degree, Diploma or equivalent education with at least 2 years experience in Maritime industry
• Mature, meticulous, proactive, resourceful & hands-on
• Strong communication & negotiation skill - Good spoken English required
• Ability to prioritize workload & meet deadlines
• Good IT skill - Procurment operating system skill
• Good team player and able to work well under pressure in a fas-paced environment

Please state your current/last drawn & expected salary in CV

We regret that only shortlisted candidates will be notified

Position: Mechanical Project Engineer (Entry-Level)
Location: Singapore
Employment Type: Full-Time

Job Overview:
We are looking for a proactive and detail-oriented Mechanical Project Engineer to join our team and support data centre projects. This role is ideal for fresh university graduates who have a foundational understanding of mechanical engineering and have completed at least one internship in a related field. The successful candidate will assist in the planning, coordination, and execution of mechanical systems in data centre environments, working alongside experienced engineers and project managers.

Key Responsibilities:

• Project Support: Assist with the planning and coordination of mechanical systems for data centre projects, ensuring alignment with design specifications and timelines.
• System Installation Oversight: Support the installation of HVAC, cooling systems, and other mechanical infrastructure, following guidance from senior engineers.
• Vendor and Contractor Coordination: Collaborate with contractors and suppliers to facilitate the smooth installation and integration of mechanical systems.
• Mechanical Systems Testing: Participate in tests and inspections on HVAC and cooling systems to ensure functionality and efficiency.
• Troubleshooting: Support senior engineers in identifying and resolving mechanical issues during installation or post-installation.
• Documentation: Help prepare and update project documentation, including technical reports, drawings, and schedules.
• Collaboration: Work closely with team members, including project managers and electrical engineers, to meet project goals and deliverables.
• Health and Safety Compliance: Assist in ensuring all activities follow local safety standards, codes, and regulations.

Job Requirements:

• Education: Bachelor’s degree in Mechanical Engineering or related field.
• Internship Experience: Prior internship experience in mechanical engineering, ideally in a related industry.
• Foundational Knowledge: Basic understanding of HVAC, cooling systems, and mechanical infrastructure.
• Problem-Solving Skills: Willingness to learn and contribute to troubleshooting and solution-finding processes.
• Communication: Good communication skills for collaborating with contractors, vendors, and project teams.

Responsibilities:

• Perform Level 2 systems administration tasks including system monitoring, management, disaster recovery, and capacity planning.
• Assist with the management of on-premises and cloud infrastructure across Microsoft, AIX, virtual environments (VMware or Hyper-V), Amazon Web Services (AWS), Azure, and Microsoft 365 cloud services such as Entra ID, Exchange Online, SharePoint, and Teams.
• Contribute to the design, setup, configuration, implementation, and deployment of new servers and Azure or AWS cloud technologies.
• Plan and manage IT resources for tasks and projects, including budgeting and capacity planning.
• Maintain and update technical documentation related to systems administration for on-premise systems, AWS, Azure, and Microsoft 365 cloud environments.
• Perform system maintenance, upgrades, patches, and incident resolution outside of regular working hours as needed.

Requirements:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• At least 4 years of experience in system support and server administration, including the implementation and management of cloud infrastructure, with a solid understanding of cloud technologies like Azure and Amazon Web Services (AWS).
• Practical experience in implementing and configuring Azure and AWS cloud services, including virtual machines, application services, load balancers, SQL Managed Instance, site-to-site VPNs, storage solutions, networking, security, logging, and monitoring.
• Hands-on experience in administering on-premises Windows Server environments, as well as VMware vSphere and Hyper-V.
• Proficiency in managing Microsoft 365 cloud technologies, such as Exchange Online, Entra ID, SharePoint Online, Microsoft Defender, and Microsoft Intune.
• Familiarity with AIX/Unix and IBM products (e.g., IBM WebSphere MQ, WebSphere, Tivoli Storage Manager Backup) is a plus.
• Certifications in Azure, Microsoft 365, or AWS technologies, such as Azure Administrator Associate, Endpoint Administrator Associate, or AWS SysOps Administrator, are considered an advantage.

To apply, please visit www.gmprecruit.com and search for Job Reference: 24928

To learn more about this opportunity, please contact Yingying at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lai Yingying | Registration No: R1110239

• In-house Support IT
• Support and maintain WAN/LAN network links and equipment's
• Administration of the Servers
• Support and maintain the Firewall System
• Fault diagnosis and resolution of software and system errors on the desktop
• Fault diagnosis of desktop hardware and co-ordination of repairs and replacements
• Software installation and decommissioning of desktop hardware
• Outdoor / Onsite Project Support for IT Related Products
• Interactive Panel Firmware update
• Network Devices Firmware update
• IP configuration of network devices
• Support Product Preventive Maintenance
• Support Interactive Panel Set up
• Any other task assign by Superior

Job Overview – Software QA Engineer

• Experienced with QA lifecycle, from writing test plan, thinking through test case design, performing test execution (new feature and regression) to defect management and retrospect. Familiarity with the end-to-end software development life cycle is helpful when collaborating with other teams.
• Perform and drive Manual testing, Automation Testing and Performance Testing.
• Fully document any bugs/anomalies identified in testing with instructions how to recreate them.
• Accurately record and maintain test results, and its progress to resolution.
• Configure, set up and maintain QA environments for testing.
• Collaborate with Client Services team to help perform root cause analysis of issues found in the production environment.
• Design and develop automated tests according to expected user behavior and business rules.
• Identify and propose areas of improvement throughout the software development process.
• React quickly to changes in priorities or circumstances to meet the needs of the business.
• Continuous improvement of the testing process, testing quality and efficiency.
• Maintain good documentation and change controls.

Educational Background and Experience

• Bachelor's degree or above in engineering, computer science or other related fields
• Recent graduates with pertinent experience are encouraged to apply.

Required Skills

• A self-learner proficient in testing procedures and test case design methods who takes the initiative to do further technical research
• Familiar with database and SQL
• General working knowledge of Linux or Unix operating system commands
• A proactive approach to problem-solving with strong analytical and research skills
• Strong logical thinking ability, negotiation skills, and conflict management capability
• Good at teamwork, result-oriented, and resilient.

Additional Requirements

• Familiar with JavaFX GUI or mobile Android/iOS basic development is a plus
• Familiar with Spring-boot is a plus

Requirements:

• Bachelor's degree in computer science, information technology, or a related field

• 3 to 5 years of Proven experience as an Ansible Automation Engineer or similar role.

• Strong scripting skills in Python, YAML, Angular JS and PowerShell and good to have Java and Groovy

• Excellent communication skills

• Familiarity with API calls and JSON.

• Proficiency in working with Linux , Windows, Core OS, and RHEL environments.

• Knowledge of cloud platforms such as OCP and AWS

• Experience with Red Hat Ansible Automation Platform and Ansible is a must

• Familiarity with GitLab, Bitbucket, Jenkins and JIRA for version control.

• Experience with integration of automation solutions into ITSM tools

• Solid understanding of automation principles and practices Docker and Kubernetes for containerisation and orchestration

• Fair knowledge in networking, including VLANs, firewalls, and ports

Key Responsibilities include:

· Knowledge and hands on experience in implementing virtualization network

· Working experience for industrial Cyber Security would be a plus

· Configure, maintain and troubleshoot Honeywell Experion hardware and Software

· Implement and Admin EPKS & TPS Domains, controllers (HPM, C200/C300), switches etc.

· Support Honeywell FTE, and Microsoft Technologies

· Support client server architecture

· Perform preventative and corrective maintenance of system hardware/software/networks

· Assist clients with third party vendor communication to our systems

· Administer preventive maintenance on controls systems

· Provide technical support to customers and serve as customer contact for service related issues

· Be able to respond to emergency calls as part of a 24/7 roster service and resolve them within the guidelines that meet or exceed our contract customer expectations and requirements

· Program code logic including system configuration / implementation and troubleshoot existing code. Support Factory Acceptance Testing, Site Acceptance Testing and startup activities including equipment checkout.

· Perform audits and baselines of installed systems to help with migrations and trouble shooting

· Team Player, comfortable with being the lead support person on site.

· The ability to accurately document work performed.

· Knowledge of other systems such as TDC / TPS, PHD, DOC4000, FSC, DVM or others a bonus

· Support / lead projects from preliminary engineering, detail design, startup. Have capability to lead others to accomplish all project goals and objectives.

· Knowledge and experience with process instrumentation would be beneficial

· Must be able to take ownership and responsibility for work and actions

Basic Qualifications:

· Bachelor’s degree in with Chemical Engineering / Automation Control

· Minimum of 5 years’ field experience

· Preferable with working experience in Experion (TPS, PHD, FSC an advantage)

· Be comfortable leading system migrations between releases.

· Work independently on life system

· Certificate on Virtualization would be a plus

· Demonstrated effective oral and written communication and interpersonal skills.

The candidate is part of the Data Loss Prevention (DLP) project and operation team. He/she will be reporting to the DLP Lead and be assigned with project and operational work and responsibilities which includes but not limited to, processing requests, investigate operational issues and facilitate security investigation by providing the necessary information in accordance with approved policy and procedures as well as process improvement.

• Plan, deploy and implement Data Loss Prevention on security projects and initiatives
• Responsible for management, advanced configuration, monitoring and fine tuning of Data Loss Prevention solution
• Configure, develop and maintain DLP tools & platform, SIEM and threat detection tools
• Diploma/Degree in Computer Science, Engineering or equivalent
• At least 8 years of experience in IT Incident Management, DLP Operations or SOC
• Experience in multiple channels of DLP implementation and operations
• Good team player as well as strong communications skills
• Strong analytical skills and ability to work independently

Role:

Fire Protection Engineer

• Singapore Based (Working location: Labrador area)
• 5.5 Days work per week (Mon- Fri 8.30am-5.30pm; Sat 8.30am – 12.30pm)
• $3500-$5500
• Diploma / Degree in Mechanical Engineering/Building Services + 5 years of relevant experience
• Experience in Water Mist system and/or foam system is added advantage
• Career Progression Opportunities

Job scope

To monitor and supervise sub contractors’ work progression according to shop drawings, method statements, material and samples

To liaise and work with relevant authorities, sub-contractors or clients on shop drawings, materials and samples

Review and align Fire protection design drawings to ensure compliance with design specifications and guidelines (Sprinkler System, Fire Alarm System, Hose reel System, Wet/Dry riser system, Fire Hydrant System, Fire man intercom system)

Knowledge in M&E and able to Identify discrepancies between M&E, structural, ID, architectural and client provisions

Manage and execute project as per the schedule

To attend meeting with contractors to address issues and update progress

Study and reviewing of drawings, specifications for compliance

Allocate work to supervisors and ensure jobs are correctly and properly achieved within standards and SOP.

Plan and lead testing and commissioning of the fire protection systems.

Follow up with site / authority inspections, defects rectifications of the fire protection work.

Plan and prepare OMM, training, As-Builts drawings for handing over of completed fire protection systems to client.

Follow up with maintenance of fire protection systems during DLP

#SCR-vicky-wee

✅ Wee Yuan Huan
✅ Reg No: R21100383
✅ The Supreme HR Advisory Pte Ltd
✅ EA No: 14C7279