Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. To carry out RBI inspections as per the codes and standards.
7. Perform QA/QC welding inspections at site.
8. Carry out coating inspections of equipment’s and piping.
9. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
10. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have bachelor or masters degree in mechanical engineering or equivalent.
2. Must have more than 10 years’ work experience.
3. Must have valid API 510, API 570, API 571 and API 580 Certificate.
4. Must have Senior Welding inspector certificate under AWS-SCWI or CSWIP 3.2.2.
5. Must have NACE level 3 or FROSIO level 3 certificate.
6. Must have NDT level II certificates in MPI, PT, UT and RT.
7. Must have previous shutdown inspection experience in Shell Seraya and Neste Singapore.
8. Knowledge in code book like AWS, ASME, API codes.
9. Must have good knowledge in coating inspections.
10. Must have a good knowledge about MT, PT, UT, RT Methods.
11. Must having an inspection experience in Exchanger, pressure vessels, piping and columns.

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Responsibilities:

• Monitor, support, maintain, and document CIM systems.
• Design, develop, maintain, and improve CIM applications and components.
• Provide Level 2 and Level 3 support for production line operations.

Requirements:

• Degree in Computer Science/Computer Engineering, or equivalents. Diploma with relevant experience acceptable.
• Minimum 2 years of experience in CIM with High Automation, MES, and SECS/GEM.
• Proficient in basic SQL (Oracle) and Java.
• Experience with Tibco (TIB/RV) or high-tech manufacturing environments is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Monitor, support, maintain, and document CIM systems.
• Design, develop, maintain, and improve CIM applications and components.
• Provide Level 2 and Level 3 support for production line operations.

Requirements:

• Degree in Computer Science/Computer Engineering, or equivalents. Diploma with relevant experience acceptable.
• Minimum 2 years of experience in CIM with High Automation, MES, and SECS/GEM.
• Proficient in basic SQL (Oracle) and Java.
• Experience with Tibco (TIB/RV) or high-tech manufacturing environments is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

1. To supervise and manage the functions of Repacking/Containment/ICW operations and Maintenance.
2. To monitor the safe process flow and backlog level of TIW waste.
3. Ensure all staff are well trained according to OJT programme and following the safe work procedures and SOPs.
4. To ensure the effectiveness and smoothness of coordination with operation and sales team and customer service maintaining high quality of services.
5. To monitor the outgoing containment purchase budget and encourage the recycling of used containment to save cost.
6. Daily and regular inspection of the operation processes and monitor the plant 5S and TPM activities, safety and discipline at works, machineries and equipment conditions.
7. Work with Lab chemists to evaluate and develop new treatment methods and handing procedures for new and unknown wastes, and review of operation costs and regular update to management.

Requirements:

• Degree in Chemical Engineering or Chemistry
• At least 2 year relevant experience

Remuneration:

• Basic salary: $3,400 – $3,800
• Company Transport / Transport Allowance $120 if candidate possess own transport
• Working Hours: Monday to Friday: 8am to 5pm
• AWS & VB
• Sign-on bonus

Responsibilities

· Carry out Electrical, Instrumentation, Control and Automation (EICA) design for water and wastewater treatment projects.

· Manage the procurement, costing and delivery of electrical software and hardware required

· Make automation programming according to clients’ technical specifications

· Arrange control panel assembly, testing, and installation at construction site

· Modification and Integration of new equipment / system with existing automation system

· Update of SCADA/HMI graphic to reflect new instruments/equipment and mapping these graphics to the corresponding field signals

· Attend to EICA breakdowns with diagnosis and solutions

· Attend meetings with subcontractors and clients for technical clarifications and arrangements.

· Coordinate with Project Managers to ensure deliverables are within the schedule.

· Keep records of EICA design, drawings, and document systematically

· Provide support and assistance to Sales Department and Maintenance Team

· Guide and educate junior EICA personnel.

· Other ad-hoc assignments.

Requirements

· Bachelor's Degree in Engineering (Computer/Telecommunication), Engineering (Electrical/Electronic) or equivalent.

· Minimum 3 years working experience at membrane base water treatment plant, preferably

· Proficient with Schneider / Siemens / Allen-bradley software

· Well-versed with SCADA and HMI

· Excellent communication skill

· Good personality and team spirit

· Customizes CMS database check sheets and allocation of check sheets based on latest engineering drawing revisions and punch list updates for mechanical/ electrical process/safety /HVAC discipline

· Prepares boundary drawings as per subsystem listing

· Prepares procedures/ work method statements and risk assessment for mechanical/electrical process/ safety/ HVAC commissioning activities

· Attends Factory Acceptance Test at vendors' premises, as required. (FAT)

· Leads a team of mechanical electrical technicians/ mechanics for preparation and site execution of pre-commissioning, commissioning and function testing of mechanical equipment and vendor equipment packages on the topsides

· Reviews commissioning shipped-loose items, consumables and spares for proper inventory and availability

· Reviews system / sub-system completion status for taking over from Construction Team as per commissioning schedule and priorities

· Liaises with various parties including vendor site representatives, where required, to ensure any issues affecting system completion are resolved in a timely manner

· Participates in system / sub-system joint inspections for taking over from Construction Team, punch listing activities,

· Able to travel oversea

· Prepares relevant documents required for safe energization of equipment such as Livening -Up Notice, CPTW, Isolation Lists, etc

· Ensures that commissioning testing activities are conducted safely and complies with the site PTW and safety regulations and procedures

· Reviews completed commissioning documentation such as check sheets, test procedures, red-line mark-up drawings, commissioning dossiers, etc.

· Follows up with relevant parties to ensure proper closure of outstanding issues arising from commissioning activities

· Ensure to maintain up to date punch close report

Requirements:

· Min. 3 years year of commissioning experience in the Oil & Gas/ marine industry.

· Experience in commissioning of Diesel Generators/ Compressors/ Pumps/ Piping systems / Utility packages/ cranes / mechanical handling equipment/ HVAC, etc

· Good knowledge and experience in commissioning activities of oil and gas/ marine facilities

· Familiar with permit-to-work systems and lock-out tag-out procedures

· Good analytical, problem solving and planning skills.

· Familiar with Project Specifications, Technical and HSE Standards

· Familiar with MS Office software applications (MS Outlook, Word, Excel, Power Point etc.

· Familiar with Completion Management System database such as PIMS-CMS / WinPCS / ProCoSys / ICAPS---(Optional or added advantages)

Working hours：

Monday –Friday: 8:30am – 6:00pm (Transport provided from Jurong East MRT to Office)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Purpose: Responsible for supervising staff, ensuring health and safety regulations at work are followed, making sure adequate training has been provided to the workers in the usage of equipment, and identifying deficiencies to be improved in production.

Key Area of Responsibilities:

• Supervising the man and assembly process, ensuring quality work is done safely and efficiently.
• Organize and motivate the mini-companies to perform daily production activities.
• Draw up training, and job rotation plans to develop manpower to be more flexible and competent and stimulate continuous productivity improvement.
• Liaising with other Engineers to develop plans that improve productivity, in terms of costs and manpower required.
• Support engineering/manufacturing teams, draw up safety protocols, report issues to the manager, and develop strategies to improve efficiency and profit.
• Take part in quality meetings with QA and process, conduct production CAB meetings, and ensure corrective actions are carried out.
• Conduct daily supervisor and production meetings to achieve delivery reliability.
• Record and report on the department’s activities and production results regularly in each productivity review meeting.
• Manage consumables and non-capitalized equipment spending.
• Maintain and ensure 5S housekeeping on the shop floor.

Qualification & Experiences:

• Diploma/bachelor’s in engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering).
• At least 3 years of experience as an engineer in the manufacturing assembly environment.
• Good communication skills to perform mentoring and coaching to production staff.
• Good knowledge in problem-solving methodology.
• Ensure the safety standards and process safety management is duly followed.

Duties & Responsibilities:

1.Preparation of construction schedule and monitoring of work progress.

2. Coordinate and supervise the civil work progress.

3. Resolve the problem arises on site to ensure timely completion of works

4. Conduct meeting with sub-contractors to update progress of work.

5. Ensure works are carried out in accordance. Update daily activities and manpower allocation.

6. Liaising with local authorities, client’s representatives and sub con and consultants.

7. Review project specifications, tender classification and construction drawings.

8. Involve in technical discussion and progress meeting

9. Assist project manager in daily works.

Qualifications

• Bachelor’s degree in Mechanical / Sewer Engineering approved by PE board.
• Min 4 years' Experience
• Experience in water pipe and best knowledge in laying water pipe
• Strong verbal, written, and organizational skills.

Other Details

Salary Range S$3,500 to S$7,000

performance bonus & variable bonus

Job Description

• Online and Offline Partial Discharge Measurements for HV electrical assets such as cables , transformers, switchgears , motors and generators
• Offline Cable testings (Hi-pot test, Megger test, Tangent Delta test) above 6.6kV rated Cables
• Infra-Red Thermography for HV and LV Switchboards
• Lightning protection and earthing system measurement.
• Assist to servicing maintenance work by project teams.
• Handling of multiple test equipment from Omicron, Doble Engineering,Qualitrol, IRIS Power, EA Technology, HVPD, PDS, B2 and IPEC

Requirement

· Bachelor Degree in Electrical Engineering (Preferably SIT, NTU)

· Training will be provided and fresh graduates are welcomed to apply

· Good interpersonal and communication skill.

· Team player & able to work independently

Transport is provided from 6 MRT pickup points ie Paya Lebar, Serangoon NEX, Bishan, Jurong East, Joon Koon, Woodlands

13th Month & Variable Bonus

The Solutions Engineer is responsible for the installation, technical support and maintenance of software applications that help customers manage their manufacturing processes and improve production efficiency. He/She should have a deep understanding of the application's functionality and backend. He/She is responsible for interacting with the application users and setting up, and onboarding of the users. He/She collaborates with the sales team to promote products and services to meet customers needs and requirements. He/She is also familiar with the relevant software platforms on which the solutions are deployed and uses critical thinking skills to identify and solve problems. The job requires being on standby with on-call availability and travelling to overseas customer sites.

Key Responsibilities

• Execute a project or test cut for Aerospace and PM part
• Doing time study and making a fixture concept for Aerospace and PM HV part
• Provide machine operation training to customers.
• Provide on-site technical support to for pre sales activities
• Actively visiting customer for post sales support
• Preparing Aerospace sample for sales usage
• Runoff for HV PM
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma in Mechanical Engineering or equivalent
• Familiar with 3 or 5 axis CAM Programming and Process Development
• High level of interpersonal skills and integrity
• Solid team player
• Good communication skill
• Willing to travel overseas for long term

About Infosys

Infosys is a global leader in nextgeneration digital services and consulting. We enable clients in more than 56 countries to navigate their digital transformation. With over four decades of experience in managing the systems and workings of global enterprises, we expertly steer our clients through their digital journey. We do it by enabling the enterprise with an AI-powered core that helps prioritize the execution of change. We also empower the business with agile digital at scale to deliver unprecedented levels of performance and customer delight. Our always-on learning agenda drives their continuous improvement through building and transferring digital skills, expertise, and ideas from our innovation ecosystem.

Visit www.infosys.com to see how Infosys (NYSE: INFY) can help your enterprise navigate your next.

The Infosys Company Led Training (CLT) is a program in partnership with TeSA, driven by IMDA.

CLT is a structured development program that aims to enable fresh graduates to acquire specialist, expert or mastery-level competencies for jobs in demand by the industry, especially those that support Digital Economy.

If your passion is to build solutions that really make a difference to enterprises, the community and your world, Infosys is the right place for you.

* Selected candidate Singaporean / SPR will be offered a full-time position with training provided.

Roles and Responsibilities:

• Requirements Gathering
• Design
• Architecture
• Development
• Testing
• Implementation
• Warranty
• Transition
• Production Support
• Maintenance
• Knowledge Management

Skills /Competencies:

• Essential: Degree in Computer Sciences or related.
• 0-3 years of working experience.
• Must be a Singapore Citizen / Singapore Permanent Residence
• Preferred Java programming with SQL database experience.

Additional Skills:

• Be able to think logically and a team player.
• Good analytical abilities
• Strong written and verbal communication skills.
• Attention to detail, good analytical and problem-solving skills

At Infosys, we recognize that everyone has individual requirements. If you are a person with disability, illness, or injury and require adjustments to the recruitment and selection process, please contact our Recruitment team for adjustment either via the following email [email protected] or call 1-866-472-0935. Alternatively, you can include your preferred method of communication in email, and someone will be in touch.

Please note in order to protect the interest of all parties involved in the recruitment process, Infosys does not accept any unsolicited resumes from third-party vendors. In the absence of a signed agreement, any submission will be deemed as non-binding and Infosys explicitly reserves the right to pursue and hire the submitted profile. All recruitment activity must be coordinated through the Talent Acquisition department.

“All aspects of employment at Infosys are based on merit, competence and performance. We are committed to embracing diversity and creating an inclusive environment for all employees. Infosys is proud to be an equal opportunity employer.”

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

Job Responsibilties:

• Plan and design mechanical engineering works for building services.
• Prepare reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Conduct design presentations, review shop drawings and material/equipment submissions, handle RFIs and other contract administration duties.
• Oversee the installation, testing and commissioning of Mechanical engineering works.

Job Requirements:

• Degree in Mechanical Engineering from a University recognized by the Professional Engineers Board, Singapore.
• Minimum 3-5 years of relevant experience in mechanical engineering design.
• Good working experience in a consulting firm with proven track records in major development projects.
• Knowledge of mechanical engineering design systems software.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.
• Conversant with local codes and regulations, and authority submission procedures.
• A team player, able to work both independently and as a group, ensuring excellent project delivery to Clients and other stakeholders.

Job Description

• Co-ordination and supervision of M&E works
• Liaise with M&E Consultants
• Ascertain and make provision for all M&E and building services in collaboration with the project staff
• Monitor progress, quality of workmanship and compliance with authority requirements.
• Highlight and advise the project staff on the interfacing of M&E services and the building works
• Coordination with multiple parties not limiting to design consultants / engineers, clients’ project representatives, statutory / authority agencies etc. for the establishment of the design deliverables requirements for submission
• Review design deliverables together with the design consultants / engineers and ensure that it is in order for submission
• Attend to technical clarifications as and when required to address technical issues and establish method statements
• Project Management and sites supervision works.
• Able to coordinate with contractors and consultants for engineering issues and drawing plans.
• Perform all duties in accordance with company policies, processes, systems and procedures.

Job Requirements:

• Minimum 8 years of engineering experience with recognised Degree in relevant field
• At least 5 years of supervision experience of E&M work in the construction site for projects of similar scale, complexity and nature of work
• Candidate must have LTA/ MRT/ rail projects background

Job Highlights

• Attractive salary package

• Basic Salary + Commission + Vehicle Allowance

• Excellent benefit

• Dynamic working environment

• 1.5 days WFH

Job Description

• Continually meeting or exceeding sales targets by selling company products to new and existing customers.

• Services existing accounts, obtain orders, and establishes new accounts by planning and organising call/visiting on existing or potential sales prospects.

• Establish, develop and maintain positive business and customer relationships.

• Monitor the company’s industry competitors, new products, and market conditions to understand a customer's specific needs.

• Conduct calls and face-to-face meetings with customers daily.

• Developing and implementing an effective sales strategy to drive sales.

Job Requirements:-

- Positive attitude, self-starter

- Have a sense of responsibility

- Adaptable/flexible thinking

- Strong interpersonal skills

- Always team focused

- Processes a class 3 licence with own transport

- Min 2 year experience in industrial / construction / Marine sales

- Experience with hose management is strongly preferred

Working days: Monday – Friday 8:30am – 5:30pm

Saturday 8:30am – 1:00pm (alternate)

We are looking for Software Engineer (Golang) to join one of the Government agency!

• Exciting opportunity to work with a team of professionals to deliver high quality application
• Great career progression and friendly working environment
• Attractive salary and employment benefits

What you will be working on:

• Mainly responsible for software design and development of web frontend and backend applications
• Write automated functional and unit testing for the code you write
• Develop backend APIs & databases supporting the applications
• Design and develop applications leveraging cloud technologies
• Assist DevOps Engineer on build and release automation
• Work closely with fellow developers in pair programming and code review
• Work closely with Business Analyst, Quality Engineer, User Interface/User Experience Designers

What we are looking for:

• Minimum 4-5 years of software development experience in web applications using Golang
• Experience in Reactjs/Typescript/Nodejs, preferably Golang
• Familiar with JavaScript unit testing frameworks such as Jest or Mocha

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:
Contact you about potential opportunities.
Delete personal data not required at this application stage.
To withdraw consent, email [email protected].
All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Liew Chien Hui (Vivian) - R2090138

ScienTec Consulting Pte Ltd - 11C5781

Job Responsibilities:

• Responsible for leading the planning and design of Mechanical engineering works for building services and infrastructure works.
• Review reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Supervise the installation, testing and commissioning of Mechanical engineering works.
• Work together with other disciplines in feasibility studies and design, as well as to ensure excellent service delivery to Clients.
• Job Title will correspond with project experience acquired and individual competency in technical knowledge/skills, project management and contract administration.

Job Requirements:

• Degree in Mechanical Engineering recognised by the Professional Engineers Board, Singapore.
• Ideally registered with the Professional Engineers Board, Singapore.
• Minimum 6-8 years of relevant experience in Mechanical engineering design for building services and infrastructure works.
• Good working experience in a consulting firm with a proven track record in major development projects.
• Conversant with local codes and regulations, and authority submission procedures.
• Strong planning, organizational and supervisory skills.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.

Working Hours: Mon-Fri (8.30am – 5.30pm)

Job Summary:
The face-to-face IT Support role will be responsible for providing on-site technical support to customer users, resolving software and hardware issues, and answering IT related questions. This role requires strong problem-solving skills, a customer-centric approach, and the ability to communicate technical information clearly to non-technical staff.

Key Responsibilities:

• Provide and maintain exceptional customer service, ensuring timely, efficient, and professional responses to all customer inquiries and issues.
• Install, upgrade, support, and troubleshoot Windows or Mac operating systems and applications, such as Microsoft Office or other authorized desktop software.
• Diagnose and repair hardware issues on computers or facilitate the warranty process as needed.
• Utilize technical expertise to support corporate-issued desktop, laptop, and mobile devices, as well as network, email, and other related services.
• Offer ideas and solutions to prevent recurring issues that impact client computing support and overall employee productivity.
• Collaborate closely with remote IT teams to ensure system functionality and adherence to processes.

Qualifications:

• Diploma in computer science, Information Systems, or a related field.
• Minimum of 3 years of experience in IT support, particularly in deskside support roles, troubleshooting various PC software and hardware issues.
• In-depth knowledge of PC hardware, operating systems (Windows, macOS), software applications, and a basic understanding of IT infrastructure (network services, VPN, etc.).
• Exceptional troubleshooting and problem-solving abilities.
• Strong communication skills, with the capacity to explain technical concepts to non-technical users.
• Microsoft, Mac, or other relevant certifications are a plus.

Soft Skills:

• Exceptional customer service orientation and customer-focused abilities, combined with patience and a positive attitude.
• Ability to thrive in a fast-paced and demanding environment.
• Capacity to work independently and as part of a team, demonstrating initiative, self-motivation, and self-discipline.
• Effective prioritization and management of multiple tasks.
• Commitment to continuous learning and adaptability to new technologies.
• Fluent English communication skills.

JOB DESCRIPTION

* Design and develop Mechanical Equipment/Systems, keeping in mind budget, timelines and other essential resources.

* Work with a team of Engineers in the creation of new product designs, ensuring alignment with project objectives and timelines.

* Utilized CAD Software to create 3D Models and details drawings for new product development.

* Implemented design modifications and optimizations to streamlne the assembly process.

* Collaborate with cross functional teams including product management, manufacturing and quality assurance to ensure successful product development and launch.

* Troubleshoot problems and devise solutions to resolve them.

* Research and keep up with the Dynamic Technology and trends in the mechanical design spectrum.

REQUIREMENTS

* Degree in Mechanical Engineering.

* Knowledge in dealing with Engineering Drawings and 3D Modelling.

* Experience working with designing software - Solidworks and Autocad.

* Minimum 5 years of relevant working experience as Mechanical Design Engineer.

* Able to work independently with minimal supervision.

* Strong verbal, written and communicatin skills.

* Sound knowledge of Computer Application and Microsoft Office.

* Willing to work on weekends and travel occassionally if required.

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

We are looking for QA Engineer to join one of the fast growing IT company in Singapore!

• Basic up to $4,000 + AWS + bonuses
• Permanent role, great working environment & career progression
• Entry level position, training will be provided
• Working location: Tanjong Pagar

Responsibilities:

• Review requirements, specifications and technical design documents to provide timely and meaningful feedback
• Create detailed, comprehensive and well-structured test plans and test cases
• Estimate, prioritize, plan and coordinate testing activities
• Identify, record, document thoroughly and track bugs
• Perform thorough regression testing when bugs are resolved
• Monitor debugging process results
• Track quality assurance metrics, like defect densities and open defect counts
• Stay up-to-date with new testing tools and test strategies
• Coordinate with development team/project management team for smooth SIT/UAT

Requirements:

• Singaporean only
• Experience in Software Manual Testing (Web Application)
• Possess knowledge of software QA methodologies, tools and processes
• Experience in writing clear, concise and comprehensive test plans and test cases
• Entry level position, training will be provided

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:
Contact you about potential opportunities.
Delete personal data not required at this application stage.
To withdraw consent, email [email protected].
All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Liew Chien Hui - R2090138

ScienTec Consulting Pte Ltd - 11C5781

Position Overview:

You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

1. Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog

2. Experience in ARM, RISC processor system

3. Experience in embedded C and assembly code programming

4. Experience in analysis of power, timing and area

5. Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)

6. Disciplined, quality-minded, and highly driven for excellence

7. Excellent team player and good communication skills

8. MSEE/BSEE in Electrical Engineering or Computer Engineering

9. Candidates with relevant experiences would be offered as Staff, taking on higher responsibilities

10. Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus

11. Experience in system modelling and simulation using emulator and SystemC is a plus

12. Passionate and strong in general programming is a plus

Position Overview

Be responsible to research and develop innovative computer vision/deep learning algorithms for image applications.

Responsibilities

1. Research, develop and optimize computer vision/deep learning algorithms for image applications, such as, object recognition, face recognition, video analytics, image quality enhancement, and 3D reconstruction.

2. Explore, design and implement new algorithms/features according to marketing requirements.

3. Algorithm testing and verification.

4. Algorithm integration in system architecture.

Requirements

1. Ph.D. or MS with equivalent practical experience in Computer Science or Electrical Engineering or related disciplines such as Applied Mathematics/Statistics.

2. Broad knowledge in various computer vision related topics such as deep learning, object recognition (detection, classification, segmentation) and tracking, stereo, and/or 3D reconstruction; candidate with image sensor knowledge is a plus.

3. Strong knowledge and extensive hands-on experience of independent algorithm research; candidate with strong mathematics background is a plus.

4. Excellent C/C++ programming skills, proficient with scripting languages (e.g. Python or Matlab), and extensive experience with OpenCV.

5. Excellent verbal and written communication skills.