Product area

Google's network provides services to millions of Internet users around the world. Our metros are on the edge of our network where Google connects to its users. The Network Team is responsible for operating that network reliably and at scale. Our team owns the full life cycle of all space, power, and network assets in all of Google’s data centers and metro points of presence globally. From the foundation, we are involved from site acquisition to construction and are accountable for what space and power is delivered. We're involved in every facet of network delivery from architecture and design to installation, configuration, activation, and commissioning.

Job description

As a Network Implementation Engineer, you will be the initial point of our efforts to execute deployment, maintenance, and operations of private data networks worldwide. You will work with Technical Program Managers, Network Engineers, Design and Infrastructure Engineers, Field Engineers within Google, as well as construction and telecommunications vendors and contractors, all to position your team and organization for success.

You will facilitate faster, better, and more efficient, positive outcomes for the business and our customers. Your objective will be to build the world’s most reliable, cost-effective and scalable network to support all of our current and future customers and users globally.

Qualifications

Job responsibilities

• Build and operate Google's network reliably and at scale.
• Primary focus will be delivering Infrastructure capacity for APAC region.
• Responsibilities include design, planning, and installation support for optical transport.
• Beyond day-to-day responsibilities, you'll also work with more senior engineers to develop creative approaches for keeping operational costs low through tooling and process improvements.

Minimum qualifications

• Bachelor's degree in Network Engineering or Telecom Engineering, a related technical field, or equivalent practical experience.
• 3 years of experience in Dense Wavelength Division Multiplexing (DWDM) or Transmission Control Protocol/Internet Protocol (TCP/IP) or system design operations methodology.

Preferred qualifications

• Experience in Troubleshooting of DWDM systems and topology and architecture.
• Knowledge of fiber types and their application; physical fiber characteristics; and standard testing tools Optical Spectrum Analyzer (OSA), Bit Error Rate Test (BERT), Optical Time Domain Reflectometer (OTDR).
• Understanding of networking and fundamentals of network troubleshooting at Layer1.
• Understanding of network transport design, equipment and infrastructure.
• Excellent written and verbal communication skills.

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Roles & Responsibilities

Job description:

• Responsible for day to day Operations and administration on network & security infrastructure
• Responsible for firewall security appliances, routers and switches particularly trouble shooting and/or debugging network related problems.
• Perform support, configuration and maintenance of network equipment and network operating System
• Perform basic Linux administration and able to configure, manage network application.
• Handle network projects and identify any missing components in the infrastructure and support future demands on the network infrastructure.
• Good Knowledge troubleshooting, problem identification, problem resolution and/or resolution recommendation activities
• Must have experience in managing of Checkpoint firewall, Extreme, HPE, Cisco, Aruba Switches.
• Work with vendors to deliver the project scope and meeting project deadlines
• Proactively monitor network performance, ensuring high network availability and smooth operations
• Involve in Network and IT audit and adhere to security compliance and governance.
• Perform evaluation, proof of concept and provide recommendations.

Job Requirements:

• A Bachelor’s degree in Computer Science, Computer Engineering, IT or equivalent.
• Must be CCNA certified, CCNP preferred.
• Working knowledge plus at least a year’s experience in networking technologies like Structured Cabling, WAN, LAN, VPN, Network Security, Wireless, iBGP, eBGP, Routing Protocol, OSFP etc.
• Hands on experience in implementing, administering and troubleshooting network infrastructure devices, including cisco, Brocade routers, Dell enterprise and cisco switches, network firewall, IPS, SIEM, vulnerability assessment and monitoring tools.
• Experience in IPv6 and Data Centre operations an advantage.
• Familiarity with Linux (as a user and system), container technology, security concepts, project management and ITIL processes will be added bonuses.
• Familiar with Dense wavelength division multiplexing DWDM) is a plus.
• Familiar with basic Linux administration is a plus.

We are looking for Project Engineer to join our fast and growing team. You will be working with stakeholders on the following:

Job Description

• Execute and manage the project and responsible for the quality of work produced by the team and sub-contractor(s).

1. Projects
2. Documentation
3. Acceptance

• Co-ordinate, plan, conduct and manage the various activities within the project team, with the subcontractor(s), customers and document the progress of the project.

1. Project Schedule & Planning
2. Team Management
3. Risk Management
4. Prepare and Conduct PMR, PDR & CDR
5. Project Meeting
6. Knowledge sharing and conduct training
7. Prepare Operator and Maintenance Manual
8. Prepare and Conduct Installation, Checkout, Inspection and Testing
9. Conduct Factory Acceptance Test and On-Site Acceptance Test

Requirements:

• Degree with at least 3 years or Diploma with at least 5 years in Engineering related field
• Strong organisation skills and meticulous
• Team player with good communication and interpersonal skills
• System knowledge such as RFDF, EOIR & Radar will be added advantage
• Able to travel within a short notice is a plus
• Candidates with strong background will be considered for role of "Project Manager"

Interested applicant can click on 'Apply' or send updated CV to [email protected]. We regret to inform that only short-listed applicants will be notified.

Job Description

• Prepare project schedule in either MS Project or Oracle Primavera P6.
• Cost loading to the baseline programme
• Monitoring Critical path and Earn Value Management (EVM) analysis
• Prepare impact analysis for EOT claims
• Prepare working programme and float analysis
• Document control for relevant EOT event
• Monthly progress report and resource monitoring
• Handle on the change control

Requirements

• Degree/Diploma in Civil Engineering/Mechanical Engineering or any other engineering field with minimum 3 years of experience in project planning roles.
• Possession with CAPM or PMP certification will be an added advantage.
• Good analytical, communication and problem-solving skills
• Team player
• Strong analytical, critical, and logical thinking skills.
• Able to work independently with minimal supervision.

Sulzer is a leading engineering company with a proud heritage of innovation. Join our global team to grow your expertise and develop innovative solutions that enable a prosperous and more sustainable society.

Purpose of the Job

Sulzer Chemtech’s expanding licensing portfolio is delivering exciting new low-carbon solutions to customers as they navigate the ever-changing world of sustainability. Our client base faces challenges from multiple fronts and are turning more and more to technology-providers for a roadmap that will lead them to a successful future. This requires us to be more creative and more responsive than ever before as we work as a global team to propose and sell our product, technology, and service portfolios. We are looking for a Senior Technical Sales Engineer that understands customer needs in providing technical support and crafts winning proposals in support of sales strategies with the help of team members and technology experts.

Your main tasks and responsibilities:

• Will be part of Global Technical Sales team led by Technical Sales Director
• Responsible for generating proposals independently most of the time working with guidance from Technical Sales Director
• Study customer’s specifications: review, interpret, understand, and identify bid requirements.
• Prepare complete deliverables for the full technical proposal producing simulations, material balance and utility requirements, Process Flow Diagrams, equipment sizing and design, Capital Cost Estimation
• Attend customer proposal review meetings as needed, presenting the technical details as required.
• Support commercial sales team based in China with technical inputs for customer sales visits and travel with them as and when needed.
• Develop opportunities with a focus on increasing market share and identifying new opportunities for Sulzer;
• Correct usage and timely update of CRM tool
• Drive the company’s risk management process for quoted opportunities
• Deliver Order intake results to meet annual targets.

To succeed in this role, you will need:

• Bachelor Degree in Chemical Engineering / Business or Equivalent.
• 5 to 8 years of experience in refinery, petrochemical, and downstream industry with basic understanding of process configuration
• Proficient with process simulation and design software’s like PROII, HYSYS, Aspen Plus etc.
• The ideal candidate has relevant sales experience in licensing and is passionate about technology, customer relationships, and results.

Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment.

We are proud to be recognized as a Top Employer 2024 in Brazil, China, Germany, Switzerland, the United Kingdom and the United States.

Role: Laboratory Engineer (Geotechnical/soil testing)

Job Roles and Responsibilities:

· Interacts closely with Client/Customers regarding their technical questions.

· Supervised daily operations in the laboratory and ensures that all activities are align with the required standard/specifications and safety protocols.

· Prepares report on all laboratory tests, this include analysis and interpretation of the results.

· Contributes in business development opportunities for new services or new methodologies.

· Willing to conduct various laboratory tests (if necessary) I.e. Triaxial test, Consolidation test, resilient modulus test and soil classification test.

· Maintaining the equipment, ensures all equipment are calibrated with required accuracy and functioning properly.

· Ensures all the report are submitted to client as per scheduled deadlines.

· Monitor the status of all received sample from sample preparation to report submission.

Job Requirements:

· Bachelor’s degree in Civil Engineering, Geotechnical or a closely related field.

· Ability to work independently and as part of a team.

· Strong understanding of soil mechanics principles and behavior.

· Proficiency in Microsoft office specially at MS Excel.

· No experience but have strong knowledge/interest in geotechnical materials are welcome to apply.

Job Roles and Responsibilities:

· Interacts closely with Client/Customers regarding their technical questions.

· Supervised daily operations in the laboratory and ensures that all activities are align with the required standard/specifications and safety protocols.

· Prepares report on all laboratory tests, this include analysis and interpretation of the results.

· Contributes in business development opportunities for new services or new methodologies.

· Willing to conduct various laboratory tests (if necessary) I.e. Triaxial test, Consolidation test, resilient modulus test and soil classification test.

· Maintaining the equipment, ensures all equipment are calibrated with required accuracy and functioning properly.

· Ensures all the report are submitted to client as per scheduled deadlines.

· Monitor the status of all received sample from sample preparation to report submission.

Job Requirements:

· Bachelor’s degree in Civil Engineering, Geotechnical or a closely related field.

· Ability to work independently and as part of a team.

· Strong understanding of soil mechanics principles and behavior.

· Proficiency in Microsoft office specially at MS Excel.

· No experience but have strong knowledge/interest in geotechnical materials are welcome to apply.

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable.

Join our team within Chemtech division in Sulzer Singapore Ltd as Senior Applications and Sales Engineer to help us take our business to the next level.

In this role you will be accountable for:

• Prepare technical proposals and commercial tenders project
• Interface with customers and monitor progress of projects
• Co-ordinate projects with head office, regional offices and agents
• Prepare and co-ordinate all proposal activities with Regional Offices and Local Headquarters
• Carry out tender reviews and order reviews
• Handle technical clarification for all proposals. Work as an integral part (with technology, engineering, production) in developing proposals, pricing strategies and customer presentations
• Prepare price calculation and tender documentation
• Ensure that the specifications offered to the customer are within the capability and capacity of the company
• Ensure that the customers’ requirements are adequately conveyed and reflected in engineering, manufacturing and installation
• Follow-up projects monthly and update MIS daily
• Undertake sales and marketing of Sulzer Chemtech products and services throughout Asia Pacific region
• Control all correspondences and documentation relating to project. Co- ordinate and utilize inter-department resources where necessary.
• Ensure that all technical and commercial specifications are received, clarified and agreed with customer at order stage.
• Prepare complete project and engineering files
• Arrange project handover meeting with Project Management and Engineering for larger projects and non-standard
• Initiate Customer Complaint Reports to ensure that with complaints are properly and efficiently dealt with
• Feedback information to customers on quality improvements on product and changes, as and when necessary
• Supervise/Check the work of junior Applications & Sales Engineer if required.

To succeed in this role, you will need:

• Degree in Chemical Engineering
• 5 ~ 10 years of sales and customer services experience preferably in Chemical & Petrochemical / Oil & Gas industry.
• ProII / Aspen Simulation Program is optional, but not mandatory
• Microsoft Skills
• Distillation theory
• Fair knowledge of chemical separation processes knowledge Business travel (~30%), particularly in the Asia Pacific region.

Sulzer is an equal opportunity employer, committed to the strength of a diverse workforce.

83% of our employees recommend Sulzer as a good place to work and we are proud to be recognized as a Top Employer 2023 in Brazil, China, Switzerland, United Kingdom and United States. So come and join our story, starting today!

About the Role:

To maintain the service education system for trainers and distributors. This includes training on repair processes, installation, maintenance, and troubleshooting, as well as introducing new products by preparing training schedules and materials. The role also involves promptly tracking technical inquiries and providing remote support to other Business Centres and distributors, ensuring that all administrative documentation is accurate and complete to enhance efficiency and service quality. Additionally, it includes planning and reviewing the Quality Management System to improve repair quality in the repair centre.

Roles and responsibilities:

• ·Conduct in-service training on medical devices and related products for trainers in other Business Centres and distributors, including:

o Repair processes (assembly and disassembly)

o Installation and maintenance processes

o Troubleshooting

• Prepare service training and manage the introduction of new product repairs, including training materials and schedules.
• Establish a service education system for medical devices and related products for engineers in other Business Centres.
• Address technical inquiries and provide technical support (installation, maintenance, etc.) to Business Centres and distributors, both remotely and on-site (e.g., at hospitals).
• Ensure proper documentation, notification, tracking, and follow-up on all technical inquiries.
• Support Business Centres and distributors with all service and technical-related inquiries and activities.
• Escalate issues to higher-level support when necessary and act as a contact point between Business Centres and headquarters.
• Plan and review the Quality Management Systems of repair centers to secure and enhance repair quality.
• Perform any other tasks as assigned.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• Hybrid home office work arrangements
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Diploma or Degree in any Electrical/Electronics/Mechanical Engineering Discipline
• At least 3 years of related experience in the medical device industry is highly preferred.
• Experience in technical support, including technical training.
• Experience with lean manufacturing and Six Sigma is preferred
• Strong hand-on skills and good eyesight.
• Willingness to travel to the Asia Pacific region if required.
• Proficient in the use of MS Office and its applications.
• Possess strong communication and troubleshooting skills.
• Able to work in a team environment and collaborate with staff across different age groups.
• A team player with enthusiasm for learning and the ability to work with minimal supervision.
• Strong troubleshooting and analytical skills.

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

A site engineer is responsible for the planning, design, and construction of civil engineering projects, such as roads, dams, bridges, and buildings. They are responsible for many aspects of a construction project, including:

• DesignSite engineers evaluate the soil conditions, topography, drainage, and environmental considerations to ensure the design is implemented successfully. They also draft blueprints.
• ConstructionSite engineers manage the construction teams, subcontractors, and equipment on the site. They also ensure that the construction adheres to safety regulations and project timelines.
• Quality assuranceSite engineers perform quality assurance tests to ensure that the materials and workmanship meet the required standards.
• Technical adviceSite engineers provide technical advice during construction work and identify and resolve technical issues.
• CollaborationSite engineers collaborate with clients, construction crews, architects, designers, and other stakeholders.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The Candidate will be working on dynamic modelling and simulation of the powertrain of a full electric tug vessel, mainly using MATLAB/Simulink. The simulation models will be used to investigate the steady state and transient behaviour of the ship’s electric propulsion system.

Key Responsibilities

• Development of dynamic models of the ship’s electrical propulsion system including energy storage systems.
• Investigate steady-state and transient behaviours of an all-electric ship’s electrical system in various operational scenarios.
• Carry out mission-specific electrical power consumption analysis
• Electrical propulsion and ESS design optimization.
• Any other duties as assigned by the supervisor.

Job Requirements

• Bachelor's Degree or above in the areas of Electrical Engineering, Mechanical Engineering or Marine Engineering
• Other relevant disciplines are welcome to apply
• Background in programming languages and related research project experience is ideal

Job Description

• Optimize Shopee Ads core advertising strategies, such as traffic selection, smart bidding, ranking strategies and auction mechanisms.
• Provide solutions to long-term challenges like cold start, stability, and ecosystem development for the platform.
• Participate in the development and iteration of Ads algorithms by using Machine Learning.
• Enhance the efficiency of automated delivery products, combining intelligent product selection with full-chain optimisation to improve ads performance.
• Deeply understand buyer and seller demands to create incentive-compatible, mutually beneficial advertising strategies and products.
• Continuously improve the monetisation efficiency and user experience of Shopee’s advertising products, increase monetisation efficiency and driving the healthy, sustainable development of Shopee advertising

Requirements

• At least 3 years of relevant experience in algorithm-related roles
• Minimum 2 years of hands-on experience in one or more of the following areas: machine learning, recommendation systems, computational advertising, pattern recognition, data mining, or artificial intelligence.
• Hands-on experience with machine learning frameworks such as PyTorch, TensorFlow.
• Bachelor’s degree in Computer Science, Engineering, or a related technical field, or equivalent practical experience.
• Strong communication skills, collaborative team spirit, and a product-focused, data-driven mindset.
• Experience in ecosystem construction, monetisation efficiency, or mechanism design is preferred
• Prior experience in e-commerce companies is preferred

Job Description

-Contribute to high-quality research and development work in TCOMS laboratory through physical experiments including:

o design of scaled physical test models, such as maritime vessels, offshore rigs, marine renewable platforms, and aquaculture systems for testing in TCOMS Ocean Basin.

o generation of detailed design, production, assembly, and as-built drawings of test models.

o Work with a team of engineers and technicians on model fabrication and modification, calibration, instrumentation, and experimental setup.

o enhance the measurement of models? behaviour and response by use of appropriate sensors.

o document design processes, methodologies, and results.

o contribute to process enhancements for improved efficiency of research work.

-Perform research in the following areas:

o Offshore hydrodynamics

o Coastal Protection

o Loads, motions and response analysis of Marine & Offshore platforms and floating structures

o Fluid-structure interactions

· Collaborate with internal teams, affiliated research institutes and other relevant stakeholders in proposal preparation and submission.

-Any other duties as assigned by supervisor.

Job Requirements

-Bachelor's/Master's Degree in Civil Engineering, Mechanical Engineering, Marine Engineering, Offshore Engineering, or other related disciplines.

-Preferably 3 years of relevant research/industry experience with competent knowledge in some of the following areas:

o Offshore engineering, marine engineering, hydrodynamics, naval architecture.

-Prior knowledge in the following numerical methods/software/programming languages will be an advantage:

o CAD software such as SolidWorks, Rhino, AutoCAD

o Engineering tools such as WAMIT, SESAM and OrcaFlex

o Programming codes such as Python, MATLAB, or equivalent.

o StarCCM+, OpenFOAM

-Model experiments in wave flumes, wave tank or ocean basin.

-Good interpersonal and communications skills.

-Ability to adapt and work effectively as members of a team.

-Good command of written and spoken language.

-Resourceful and self-driven with a high degree of professional integrity.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Minimum Viable Product Studio (MVP Studio) of NUS Enterprise, Technology Transfer and Innovation, supports NUS startups in their prototyping journey by providing industry know-how and technical guidance in the productization of intellectual property. We are seeking a versatile mechanical design engineer with market-proven expertise in product design and development, to join our team as a Master Engineer (Mechanical Design).

As a Master Engineer (Mechanical Design), you will guide NUS startups through the mechanical design and development process. You will support the prototyping phase of NUS startups, including generating mechanical concept proposals and mechanical architecture, implementing detailed design using 3D modelling and 2D drawings, and ensuring full design integration at system level. You will collaborate closely with internal cross-functional teams and external vendors to deliver robust mechanical design solutions.

Duties and Responsibilities

Prototype Design & Development

• Generate mechanical concepts and provide mechanical architecture.
• Implement detailed design utilizing 3D modelling and 2D detailed drawings.
• Establish modular design and full product BOM structure.
• Create sub-assembly test plans and test reports.
• Ensure design robustness and full design integration at system level
• Collaborate with ID to implement human-centric styling solutions for mechanical designs.

Technical Advisor to NUS Startups for Mechanical Design & Development

• ​​​​​​​Facilitate startups in prototyping their mechanical designs.
• Provide technical guidance and design expertise throughout the development lifecycle.
• Collaborate effectively with internal team members, startups, NUS faculty members.
• Communicate technical concepts and solutions to non-technical team members and stakeholders.

Vendor Management

• Work with vendors on DFM for the required mechanical designs.
• Coordinate with vendors to ensure delivery timelines and quality standards are met.

Qualifications

• Bachelor’s degree/ Master’s degree in Mechanical Engineering.
• Market-proven mechanical 3D design experience in consumer products, automotive/industrial products, or medtech/healthtech instrumentation, with at least 12-15 years’ combined experience.
• Proficient in 3D CAD modelling, preferably in Pro-Engineer/Creo and Solidworks.
• Experience in casting, plastics molding, sheet metal design, and 3D printing.
• Advance geometrical dimensioning and tolerancing.
• Good knowledge in automation and mechanism design.
• CFD/flow simulation in analyzing flow/thermal characteristics.
• Completed and led at least 5 complete product design life cycle.
• Good knowledge in control systems.
• Strong troubleshooting skills at module and system levels.
• Proven team manager with excellent teamwork and collaboration skills, with the ability to mentor and guide startup teams

We're seeking a skilled Full Stack Software Engineer to contribute to the development and implementation of Litmus & Sentinel, our AI guardrails products. As a Full Stack Software Engineer, you'll play a key role in ensuring the responsible and ethical use of AI technologies.

Key Responsibilities

• Collaborate with cross-functional teams to design, develop, and integrate Litmus & Sentinel into products, ensuring seamless integration and high uptime.
• Contribute to the development of frontend and backend modules, leveraging the latest technologies and best practices.
• Conduct regular code reviews, performance evaluations, and technical assessments to maintain high standards of product quality and reliability.
• Work closely with stakeholders to understand requirements and translate them into technical solutions.
• Stay updated on industry trends, emerging technologies, and best practices in AI ethics and governance.

Requirements

Essential Qualifications

• 3+ years of full-stack software engineering experience in building scalable products.
• Experience with NextJS (TypeScript) and building API backend using frameworks such as NestJS (TypeScript) and FastAPI (Python).
• Exposure to cloud-based application development on AWS.
• Demonstrated ability to write efficient code and build software.
• Strong problem-solving skills and critical thinking.

Nice to Have

• Experience in generative AI-enabled applications.
• Interest in data science, artificial intelligence, and machine learning.

• Operate precision CNC turning/milling machine
• Perform CAD/CAM programming
• Interpret Engineering Drawings and Feature of Control Symbols
• Simple setting up of work piece and tooling set up
• Check and maintain machinery daily to ensure functionality
• Able to handle 8" to 12" chuck CNC Turn/Mill Machine, Fanuc control

Requirement

• Proficient in Quality Consciousness with the ability to meet productivity goals
• Must have good interpersonal communication skills and a positive team attitude
• Preferably 3 to 5 years experience in setting up and operating CNC milling / Turning centre

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Research Engineer position in the Department of Materials Science and Engineering at National University of Singapore (NUS).

With a strong focus on industrial projects, we are developing our exciting technologies beyond the lab scale. We are seeking a talented and experienced individual with expertise in material chemistry and chemical engineering to join us.

As a Research Engineer, you will contribute to industry project focusing on scaling up our electro-metallurgical battery recycling technology from lab to pilot scale. Your major focus will be developing a process to synthesize precursor materials (pCAM) with extracted metals from spent battery materials.

• Lead pCAM synthesis processes at the R&D and pilot scale by working in collaboration with engineering team.
• Able to establish process design and synthesis rules to obtain precursors with optimal composition, interfacial properties, crystal structure, particle size, morphology, and electrochemical characteristics.

Qualifications

1. Bachelor or Master in Materials science and engineering, Chemical engineering, Material chemistry, or any relevant field.
2. Minimum of 2 yrs experience in MHP, pCAM synthesis (precipitation, crystallization).
3. Prior experience in process development and piloting new technologies is highly preferred.
4. Experience with material characterization techniques like SEM/EDS, ICP, XRD, FTIR.
5. Strong analytical skills and experience in data analysis and interpretation.
6. Highly motivated, detail-oriented, and able to work independently as well as part of a team in a fast-paced academic environment

Role Summary

The role is responsible for delivering and managing cloud security and endpoint security services, assessing policies and rules, safeguarding SaaS applications, data and endpoints. You’ll collaborate with colleagues supporting network and architecture assessment, threat modeling, vulnerability assessment, and security operations. This position supports the Enterprise Security Transformation practice and is focused on engineering secure methods of utilizing cloud infrastructure services and software to improve the overall security posture. Cloud security engineers may instruct other teams on proper coding methods. They may also investigate, create, and recommend innovative technologies or other methods that will enhance the security of cloud-based environments.

Roles and Responsibilities

• Protects system by defining access privileges, control structures, and resources.
• Safeguards information system assets by identifying and solving potential and actual security problems.
• Recognizes problems by identifying abnormalities; reporting violations.
• Determines security violations and inefficiencies by conducting periodic audits.
• Consolidate root cause analysis of past pentest results.
• Upgrades system by implementing and maintaining security controls.
• Require periodic after-hours/weekend support.
• Any other duties assigned by the Team Lead/Solution Architect.

Job Requirements

• 3 years experience in AWS Cloud Security, Security Hub, Guard Duty, Inspector, etc.
• Strong understanding of SSDLC and security frameworks.
• Knowledge in OWASP Security Standards.
• In-depth knowledge of architecture, engineering, and operations of at least one enterprise IDS/IPS/SIEM platform.
• Hands on experience with vulnerability scanning and pentesting tools.
• Hands-on experience analyzing high volumes of logs, network data (e.g. Netflow, FPC), and other attack artifacts in support of incident investigations.
• Experience with identity and access management architectures and solutions including AD, RBAC, SSO, identity lifecycle management.
• Experience in IAM, secrets management, encryption technologies, SaaS services hardening, Kubernetes and container security
• Experience with Linux administration, shell scripting, and open-source security tools.
• Knowledge of security best practices in hardening and protecting cloud environments, networks, servers, endpoints, applications, and databases.
• Certifications in OSCP / CISSP / SANS / Other relevant security certifications.
• Excellent interpersonal skills, team player and independent worker.
• Ability to operate in a fast-paced work environment and deliver under pressure.
• AWS certification will be an added advantage.

This is for a year contract subject to renew.

Responsibilities

· Assure sites are properly stocked with test tools. And test tools are periodically calibrated per AT standards.

· Participate in the Factory Acceptance Testing in the lab and preparation of FAT plan.

· Lead site commissioning activities of radio-based train control systems, including Functional tests and System Acceptance Test (SAT) and System Integration Test (SIT) and ensure that all interfaces to the signalling system are appropriately tested.

· Lead test and commissioning of the On-Board, Wayside, and Radio system system

· Liaise with Engineering / supplier for any design changes and modifications necessary subject to test results

· Record, report, and endorse test results when appropriate.

· Ensuring that testing activities are carried out in timely, logical and cost effective manners.

· Work with Engineering team for the evolution of drawings (ie. mark-up, change order, and transmittals) until the as-build stage.

· Develop productive relationships with client’s teams to ensure successful handover and post-implementation operation of projects.

· Plan and schedule site ITC activities in accordance to the rolling programme, that align with the master programme

· Produce red correction based on the released drawings and correct and rectify failures occurs during T&C phase.

· Raise NCR(None Confirmity) / MNCR (Material None Confirmty) / Fault report during fault found.

· Consolidate / track the following; records, software, hardwares, field changes.

· Implement field change orders

· Prepare installation and test and commissioning procedures / method statement for the communication-based train control system

· Verify the quality of installation works and raise concern if there is a quality issue.

· Troubleshooting, analysis in case of any issues encountered.

· Able to have a good collaboration with the vehicle testers and wayside testers during interface testing.

· Lead / Support the department for the payment milestones related to the test and commissioning

Requirements

·Bachelor’s degree in engineering or related field.

·Minimum 3 years of relevant experience.

MedTech Catapult is a national initiative for accelerating the development of high-value MedTech projects through an in-house product engineering unit. This productization unit is responsible for supporting the development of technologies through the medical device development cycle to produce full-fledged hardware product systems. The Lead Engineer will report to the Lead, Product Engineering.

Job Responsibilities:

• To provide electronics and instrumentation design capability in support of the design, development, test and manufacture of safety critical products and processes for complex medical technology product solutions.
• To interact closely with engineers from other disciplines to achieve an optimized design within the stipulated project schedule.
• To design and develop PCB and control systems for next generation medical devices.
• To provide operational electronics development, prototype design and testing - both analogue and digital.
• To conduct PCB schematic capture and layout, including component selection and testing.
• To build and test prototypes and document the design and performance of these.
• To create embedded system design and implementation.
• To conduct EMC testing with in-house equipment and through liaison with EMC test house for electrical safety and medical device compliance.
• To support development of intellectual property portfolio in device design and process technology know-how.
• To provide clearly documented records of technical data, decisions, methodologies, calculations and software use in accordance with ISO/FDA quality standards.
• To support the Procurement and Engineering teams for sourcing and defining specifications.
• To conduct error and tolerance sensitivity analysis, reliability analysis, reliability testing and reliability test program design.
• To support CAD-based electro-mechanical integration, at the component level, board level and assembly level.
• Write and review documentations for QMS.
• Interface with external parties (design houses) to communicate product requirements.
• To support other activities for product engineering when required.

Requirements

• MSc/BSc in Electrical Engineering or Computer Engineering.
• >10 years experience in medical devices (e.g. electronic product design).
• Has a good knowledge and understanding of i) Processes of electronic product development and realization, ii) operation and design of electronic systems and circuits; iii) Regulations applying to medical devices, iv) Electronic device operation and fabrication and v) Electronic sensors, measurement systems and instrumentation.
• Experience with PCB design ? digital and analogue.
• Proficient in HDL languages (Verilog, System Verilog).
• Knowledge of ASIC design and sign-off.
• Familiarity with scripting languages like Python, Perl, or C/C++ is a plus.
• Experience with design, development or manufacture of photonic systems or photonics-enabled products is a plus.
• Experience with the use of simulation tools for electronic design is a plus.
• Experience with Medical device ISO standards including ISO9001, IS013485, ISO 14971 and IEC 60601-1 and managing QMS.
• Good collaboration skills, organised and detailed.
• Demonstrate strong interpersonal skills and leadership skill.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

A world empowered by autonomy. We build robotic vehicles to improve logistics safety, forge a greener Earth, and enhance human lives.

We are a closely-knit team aspiring to change the world through disruptive technology. We are innovators. We are tinkerers. We are problem-solvers. And we have a fair amount of magic dust up our sleeves. We have a plan for fleet-level deployment of autonomous vehicles, and we are looking for the best-of-the-best to join us in making this a reality.

About Venti Technologies

Based in the U.S. and Asia, Venti Technologies is the leader in safe-speed autonomous logistics systems, developing the future of goods transportation. Using rigorous mathematics, deep learning, and theoretically-grounded algorithms, Venti has a proprietary collection of autonomy technologies including a suite of powerful logistics algorithms. Venti’s proven value proposition of saving costs, increasing vehicle utilization, and improving safety is recognized by customers and driving growth. Launched in 2018, Venti brings together an unsurpassed team internationally. The company has autonomous systems deployed in Asia for industrial and logistics sites and a growing pipeline. Venti has offices in Cambridge (Massachusetts, USA), Suzhou (China), and Singapore – our Asian headquarters.

Role responsibilities

• Be part of the team to architect and bring up the new service infrastructure for autonomous prime mover (APM) business.
• Architect and develop large scale IoT system to track live operation data for fleet management to support live fleet operations and monitorings, Provide best data model and services for global route optimization, live monitoring, live map update, vehicle configuration, vehicle maintenance.
• Architect and develop other internal serivces to facilating R& D process.
• Bring up universal auth integration and best security practice.
• Provide common client SDK for backend services.

Required experience

• Bachelor’s or master's degree in computer science or related relevant field.
• 5+ years' experience in backend implementation and .
• Experience with RESTful API framework in Python, Java, or Golang.
• Experience with high performance backend implementation, profiling, and monitoring.
• Experience with data modeling with relational database and NoSQL database.
• Experience with docker, K8s or other containerization techniques.
• Experienced with cloud services.
• Experience with proper CI/CD setup.
• Excellent communication skills.

Salary is commensurate with experience. We also offer world-class benefits, fantastic culture, flexible working arrangements, and a great international working environment. Come and join us!

Job Description:

• To lead, coordinate and work with cross functional teams such as tools suppliers, equipment engineers, process engineers, facility engineers, environment health and safety officer, contractors for tool placement plan.
• To participate in the evaluation, planning and supervision of projects including testing and commissioning.
• To provide support for new chemical and gas evaluations. Plan and execute specialty gas system release/unhooking up.
• To carry out overall cleanroom capacity modelling and planning, work with manufacturing, process and equipment engineering to ensure requirement is met.
• To review capacity model, understanding the constraints and re-lay the equipment layout in the cleanroom to maximise the cleanroom space usage.
• Management of contractor?s services to ensure fulfilment of contracts terms and agreements.
• Identify opportunities for innovation that are relevant and appropriate to the company business objectives
• To review capital and cashflow requirements, driving activities to improve capital efficiency and reduce cost.

Requirements:

• Degree, Diploma in Engineering (Chemical, Mechanical, Electrical/Electronic, Building Management) or equivalent.
• Degree with 3 years and Diploma with 5 years related experience in
• Manufacturing of Semiconductor, Wafer Fab.
• Able to work in fast-paced environment, proactive and able to work independently with minimum supervision, self-driven and self-motivate to get job done.
• Able to work in a manufacturing, production, cleanroom environment.
• Technical knowledge in Facilities Support System such as ACMV, HVAC, Scrubber, Electrical, Compressed Dry Air, Nitrogen, Hydrogen, Process Cooling Water, Ultra-Pure Warter, Chilled Water, Wastewater Treatment etc.
• Possess Project Management skills.
• Strong understanding of building codes, HSE laws, regulations and best practices and the ability to interpret/translate these into compliance activities
• Proficient in utilizing Excel, Power Point, Project, Word & Visio, AutoCAD.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The L1 IT Support Engineer (IT ServiceDesk) is accountable for providing a high level of satisfaction among students and staff by providing first-level support for all GESS standard software and hardware. This position entails the diagnosis and assessment of end-users' technical requirements, utilizing sound discernment to promptly address and resolve any issues that may arise.

The engineer's responsibilities encompass the identification, investigation, and resolution of technical issues, as well as the prompt and effective response to support requests from students and staff through in-person, email, and phone interactions. It is anticipated that they will document, chart, and monitor all issues to ensure that they are resolved in a timely manner.

Additionally, they may occasionally offer technical training and support to GESS personnel and students. The engineer is instrumental in ensuring that the team remains dedicated to providing exceptional support and satisfaction, and it is imperative that they adhere to the GESS values and expectations for customer service.

Furthermore, they may be obligated to oversee initiatives as necessary, thereby facilitating the continuous enhancement of technology services and support strategies within the educational environment.

Key Accountabilities

First-Level Troubleshooting and Support:

· Provide initial troubleshooting by guiding users through in person, via email and IT ticketing system, and over the phone while also offering remote desktop support using Remote Desktop Software.

· Deliver quality service to students and staff in all assigned tasks, consistently upholding GESS values.

· Ensure timely and effective solutions for any technical issues that may arise with GESS technology.

Incident Management:

· Log and track support calls in the designated GESS system(s).

· Prioritize and escalate tickets as required to maintain high levels of customer satisfaction.

· Identify trends in support calls and develop documentation to address frequently occurring issues.

Communication and Reporting:

· Report problems and issues promptly, notifying management of any increasing trends, unusual activities, or repeated issues.

· Provide regular updates to customers on the status of ongoing resolution efforts.

· Attend daily and weekly meetings as requested or required to stay informed and aligned with team objectives.

Continuous Improvement:

· Recommend improvements for technology or systems, including procedural steps, increased training, and enhanced documentation.

· Access and utilize software updates, drivers, knowledge bases, and FAQs to assist in resolving end-user issues.

Collaboration and Support:

· Assist other teams in initiating, designing, and managing effective support solutions as required by the school’s needs.

· Collaborate with internal second-level support and departmental tech teams (Divisional Tech Help Center) for escalated or reassigned tickets.

Technology Development and Testing:

· Support the development and testing of new technologies to ensure operational integrity and functionality.

· Proactively communicate ideas, expectations, and goals while working with others to achieve desired outcomes.

Service Level Agreement (SLA) Management:

· Follow up on tickets approaching SLA deadlines to ensure timely resolution and avoid SLA failures.

Other Duties:

· Perform additional tasks as assigned by the Director of Technology, adapting to the evolving needs of the school environment.

Knowledge and Experience

Education:

· Diploma in Information Technology, Computer Engineering, or Business Information Technology.

Technical Skills:

· Proficient in Windows OS and Apple products.

· Experience with Microsoft Office 365 and computer troubleshooting.

· Knowledge of Mobile Device Management (JAMF or Intunes) is a plus.

· Familiarity with ID Card and digital signature systems is advantageous.

Experience:

· At least three years of IT support experience, preferably in an educational environment.

Soft Skills:

· Strong customer service orientation and effective communication skills.

· Positive attitude, initiative, and the ability to work independently and under pressure.

· Team player with a cooperative mindset.

Adaptability:

· Willingness to learn and adapt to new technologies and evolving IT environments.