Overview

Responsible in overseeing the performance of outsourced maintenance service provider for mechanical and fire safety related services and in functionality as well as serviceability at all times. To audit and monitor the service standard rendered by specialist vendors and outsourced maintenance service provider. To support the GFM Site Lead, Mechanical and Fire Safety Lead in capital nature replacements for installed mechanical systems and building improvement projects. Beside daily business as usual activities, supporting and involvement

phase) are norms to minimise services and operation disruption.

Job Responsibilities

• Work closely with FM Site Lead, Mechanical Lead and Fire Safety Trade Lead, in building clear scope, expectations and deliverables for the Mechanical and Fire Safety teams as well as planning for specialty training and develop the capabilities of Mechanical and Fire Safety Team members.
• As a Subject Matter expert to assist the Mechanical and Fire Safety Lead in ensuring team members understands their scope.
• Work closely with team members, service provider and specialist vendors on system breakdown investigations, inspections, audits, review of maintenance program, etc.
• To lead / provide support in the investigation of incident/system failure to determine root cause of failure as needed.
• To participate and support in audits that the hospital subscribes to.
• Oversee, monitor and manage Mechanical and Fire Safety systems/ services and specialist vendor contracts to ensure timely renewals and contract requirements are fulfilled.
• Ensure timely renewal of authority licences and permits.
• Ensure processes are in accordance and compliant with Audit Risk Committee recommendations, NUHS Contract Management, Procurement and Finance Policies and Processes.
• Be familiar and ensure compliance with SCDF fire codes and/ or SSCP as well as to be up to date with any amendments being in place.
• To respond and support the maintenance agent and vendors in mitigating and recovery of critical system failure or incident.
• Work closely with FM Admin team on compilation of contract documents, such as agreement, checklist, warranties, etc.
• Perform invoice verification against works completed for timely processing of invoices.
• To ensure repair to reported system fault and breakdown are carried out in a timely manner.
• To carry out monthly analysis to Mechanical/ Fire Safey systems breakdown and recommend improvement plan as needed.
• Conduct internal audits to check on non-compliances, identify gaps and follow-ups till closure.
• Represent Mechanical/ Fire Safety Team as the liaison party on authority matters.
• Review and update Standard Operating Procedures (SOP) and working instructions as required.
• Develop and harmonise trade related SOPs, Preventive Maintenance Checklists and working instructions with the cluster institutions for alignment to prevailing Singapore Standards / Code of Practices and/or industry best practices for benchmarking.
• Plan and oversee Mechanical/ Fire Safety system upgrades/improvements or replacements before their expiration or its end of life through MOHRR or CAPEX funding.
• Project Manager or render support to Project Managers for improvement works to existing hospital facilities such as renovation and retrofitting, replacement of system infrastructure and improvement initiatives to existing specialized systems and hospital facilities.
• Prepare Approval To Purchase (ATP) and Approval To Award papers for Preventive Maintenance Contracts and projects.
• Maintain good documentation (e.g records of all contracts, reports, agreements, checklists) with FM Admin team to ensure full compliance.
• Keep abreast of technical developments particularly associated with technology in building engineering services and building management and in all aspects of the mechanical, electrical and fire safety disciplines.

Requirements

• Bachelor degree / Diploma in Mechanical Engineering or Facilities Management or equivalent.
• Minimum five (5) years of relevant experience in management of mechanical systems operations. (Note: Minimum 8 years for Diploma Holders).
• Experience in the operations and replacement of Fire Safety/ Alarm System, Medical Gas/Vacuum System, Lift and Escalator System, Pneumatic Tube System is advantageous.
• Certificate in Fire Safety Manager/ Fire Safety Officer or WSH.
• Good interpersonal skills and customer service oriented.
• Positive work attitude, ability to work with all levels of staffs and strong team player.

Responsibilities

• Responsible for developing applications for projects including graphics, reports and calculations
• Responsible in conducting internal testing and acceptance tests and user training
• Responsible for preparing documentation including design specifications and manuals
• Responsible for providing high quality technical support to our customer
• Responsible for conducting onsite routine health check of the systems installed at customer base and documenting troubleshooting and problem resolution steps

Requirements

• Min Diploma in Computer Science or relevant
• Min 2 years of working experience in Project Management in SI Industry
• Proficiency in programming like Visual Studio, ASP and Java, MS Office with VBA and industrial automation is an advantage
• Knowledge in Microsoft SharePoint 2007/2010 (MOSS/WSS) is an advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for analysing, troubleshooting and resolving stamping issues to achieve productivity, quality and cost targets.
• Responsible in assisting in stamping tool design reviews for new product development
• Responsible for establishing process capability, optimum parameter setting, mill cost, Bill of Material (BOM) and work instruction for dies and processes.
• Responsibel in identifying and proposing cost reduction program and upgrading to achieve quality and competitive cost to meet present and future stamping requiremen
• Responsible for providing technical guidance and training to juniors technicians and toolmakers

Requirements

• Min Nitec in Production/ Manufacturing/ Mechanical Engineering/ Tool and Die Making
• Min 5 years of working experience in Stamping Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for reading, interpreting and drawing up technical drawing specifications
• Responsible in developing, coordinating, monitoring all aspects of the operational set up for projects assigned
• Responsible for working cross-functionally with different teams and organizations
• Responsible for applying Six Sigma/Lean Manufacturing methodologies for continuous process improvements and to improve operational efficiency

Requirements

• Min Nitec in Mechanical Engineering or relevant discipline
• Min 1 years of working experience in manufacturing industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for leading the company operational Purchasing and Procurement to optimize resources and ensure customers’ supply chain is able to fulfill customers’ ship-to-dates.
• Responsible in understanding customers’ requirements and passionately drive internal procurement processes and customer’s global supply chain to exceed internal and external customer expectations
• Responsible for driving the strategic initiatives to improve overall efficiency and profitability of the company

Requirements

• Min Degree in Engineering, Supply Chain or Business
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing technical support to the plating department laboratory and engineering and manufacturing activities
• Responsible in resolving all chemical related issues.

Requirements

• Min Diploma in Chemistry or Chemical Engineering
• Min 3 years of working experience in laboratory in chemical industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible managing waste water plant & DI water plant with existing chemistries, instrumentation.
• Responsible for providing technical support to the plating department water treatment, laboratory and engineering and
• manufacturing activities
• Responsible for leading the water treatment section to resolve all issues related water.

Requirements

• Min Degree in Engineering or relevant
• Min 3 years of working experience in manage water treatment system

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing support on maintenance project.
• Responsible for handling system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.

Requirements

• Min Diploma in Electrical/Electronic Engineering, Computer Science/ Information Technology or equivalent.
• Min 2 years of working experience in managing LAN / WAN / Routers / Switches / DNS / Firewall and Milestone System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and deploying functional networks which include LAN, WLAN, WAN
• Responsible in monitoring network performance and integrity and resolving issues tiers of support have escalated by troubleshooting cloud and local infrastructure
• Responsible for planning out network installation and/or upgrade project, assign milestone tasks to support personnel and meet company deadlines for full implementation,
• Responsible for creating, overseeing and testing security measures
• Responsible for mentoring junior team members

Requirements

• Min Degree in computer Science, Engineering or a related field
• Min 3 years of working experience as a Senior Network Engineer or Network Administrator
• Professional certification (e.g. CCNP, CCDP)
• Experience in network administration and architecture
• Experience with access control models and network security

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

As a Software Engineer in Thales Embedded Product Development Team in ECC, you will participate in the design, implementation, validation and deployment of Embedded Products for major OEM customers.

Responsibilities:

• Develop, validate and deploy new software components (for example advance software security mechanism and next generation IoT connectivity protocols) for embedded operating systems targeted for mobile and IoT devices, in applications such as mobile payment, digital identity and IoT connectivity
• Participate to the development of next generation operating systems for future devices
• Being in agile development environment to work closely within team and multiple teams around the world to build great products exceeding customer expectations
• Contribute to continuous product and development methodology improvement

Requirements:

• Degree in Electrical/Electronics/Computer Engineering, or related fields
• Proficient in C/Java programming languages
• 2-5 years of experience in embedded software development
• Knowledge of embedded technologies/ecosystem, software security or Javacard knowledge is a plus
• Team player with good communications and collaborative skills

Job Description

• Plan, propose, coordinate and execute services diversion routing plan on road
• Liaise with clients, consultants and sub-contractors on project coordination
• Liaise with utility agencies e.g. SPPG, telco & etc
• Supervising and managing the site construction activities carried out by subcontractors
• Prepare documentation (method statements, risk assessments, safe work procedures) for timely submission and review

Requirements

• Equip with knowledge of NCE application
• Minimum 5 years of engineering experience in relevant field and at least 2 years’ relevant experiences in the coordination with utility agencies for utility diversion works
• Candidate with Register Earthwork Supervisor Certificate is preferred

Overview

We are looking for Facilities Engineers with strong expertise in maintenance of Electrical systems and facilities operations to join our Facilities Management team. The Facilities Engineers will be participating actively in the Kent Ridge Campus (KRC) Master Plan program and interfacing withrelevant stakeholders over different phases of its implementation. They will work with appointed

consultants to develop feasible and sustainable technical proposals and/or strategies to meet thehospital operations requirements of the future as well as minimising electrical services disruption in the course of demolition and development works planned. Lastly, these Facilities Engineers essentially are to assist in overseeing the performance of outsourced maintenance service provider to the hospital in completing the maintenance program to ensure the availability and functionality of the installed Electrical systems at all times.

Job Responsibilities

You will be responsible for the following:

a. Provide technical support and assistance to the KRC Master Plan Project team to access and acquire information on the hospital’s infrastructure and installed systems.

b. Attend and participate in relevant meetings (design planning, interface, technical clarification, etc) as per planned schedule to provide technical inputs as needed.

c. Support and input to the consultants’ technical & design proposal to meet hospital’s operation needs and minimising Electrical services disruption.

d. Coordinate internally for design and interface coordination through the various transition phases of the KRC Master Plan.

e. Review and input to proposed work plans and schedules to achieve control, compatibility and coordinated objective to avoid and minimise operation disruptions.

f. Assist in the management of the appointed maintenance agent and specialist system vendors in their maintenance scope and planned program including breakdown investigations, inspections and audit.

Requirements

Qualification Required and Area of Discipline

Degree Holders:

- Engineering degree (Electrical/Electronics/Technology or related discipline)

- 10 years of relevant working experiences



Diploma Holders:

- Diploma in Engineering (Electrical/Power/Technology or related discipline)

- 15 years of relevant working experiences

Required Competencies and Capabilities (Skills, Experiences and Professional Licences)

 1. Possesses good writing and presentation skills.

 2. Positive work attitude and ability to work with all levels of staffs.

 3. Previous experience in Electrical installation work is advantageous.

 4. Possesses BCA Green Mark certification and/or related experiences will be advantageous.

Job Summary

Development and execution of the project cost estimation, cost plan, monitor costs and collects cost data to ensure conformity with management's budget directives, cost tracking, forecasting and reporting.

Duties & Responsibilities:

• Support or lead in cost estimation for projects at various stages of the project development like FS, FEED and EPC.
• Study and understand all relevant project documents relating to the cost management of allocated projects.
• Establish project control budgets based on the client approved Project Control Estimate.
• Cooperate with Project Management Team in identifying and gaining approval of Estimates/ Change Requests.
• Perform a variety of cost engineering functions including cost control, budget preparations, forecasting, risk management, contingency quantification and cost reporting.
• Review cost commitment and expenditure information (for all cost elements), for input to the cost control and reporting system on a weekly basis.
• Prepare regular cost reports and advise management of any forecast cost overruns, to maintain comprehensive accessible registers of financial approvals, variations and change orders.
• Report turnaround and project actual vs baseline cost status as required.
• Report earned value per vendor and identify trends that impact the final cost projections.
• Prepare final cost report and invoice to client.
• Perform other functions that may be assigned by the Department Manager.
• Support in cost database input and evaluation of cost data.

Requirements:

• B.Sc. (Building/Project and Facilities Management) or
• Degree in any Engineering with cost engineering (cost estimation or cost control) internship and show interest in cost engineering or has five (5) years of working experiences as a minimum in the capacity as a Cost Engineer in the oil & gas industry, or
• Diploma (Certificate in Quantity Surveying) / Diploma (Project & Facilities Management).
• Basic knowledge of contract administration.
• Have understanding of measurement, cost estimation and project cost control requirements.
• Demonstrated success in past project involvement and technical delivery of small to medium size projects.
• Enjoy numeric calculation and proficient in Excel software.
• Excellent communication and interpersonal skills, written and verbal English.
• Good team player, self-driven with ability to interact across multiple disciplines.
• Proficiency in Microsoft Office package.

Interested parties, please send in your detailed resume.

Responsibilities & Duties

• Responsible for providing engineering expertise and technical assistance for the installation, maintenance, troubleshooting, repair and modification of facilities and equipment, development and implementation of maintenance procedures and techniques for safe, reliable and efficient operation of the plant.
• Responsible for participating in production machineries installation, modification and maintenance
• Responsible in ensuring that all process equipment, utility installations and electrical installations are maintained and running at optimum efficiency.
• Responsible for defining and generating evaluation plan, and execute qualification plan for alternate component replacement or cost reduction.
• Responsible for working with supplier and procurement team to drive cost reduction and quality issue.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 5 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing support to new product development teams
• Responsible in advising customers in the areas of high-speed signal transmission and technology development, in accordance with department strategy and objectives in terms of quality and delivery time.
• Responsible for defining, planning and executing signal integrity deliverables, including modeling, simulation, and testing. Communicate SI deliverables via reports and presentations.

Requirements

• Min Degree in Electronics Engineering, Physics or its equivalent
• Min 3 years of working experience in designing and supporting high speed electrical components
• Proficient in software tools, finite elements simulation of electro-mechanical components as well as mathematical derivation and modeling of electro-mechanical parameters

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and deploying functional networks which include LAN, WLAN, WAN
• Responsible in monitoring network performance and integrity and resolving issues tiers of support have escalated by troubleshooting cloud and local infrastructure
• Responsible for planning out network installation and/or upgrade project, assign milestone tasks to support personnel and meet company deadlines for full implementation,
• Responsible for creating, overseeing and testing security measures
• Responsible for mentoring junior team members

Requirements

• Min Degree in computer Science, Engineering or a related field
• Min 3 years of working experience as a Senior Network Engineer or Network Administrator
• Professional certification (e.g. CCNP, CCDP)
• Experience in network administration and architecture
• Experience with access control models and network security

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026