About NSING:

As part of Nations Technologies Group, NSING was founded in 2018 in Singapore bringing high-performance semiconductor products and solutions to global semiconductor industry. Our products includes General and Secure MCU, Secure IC for TPM (Trusted Platform Module), Bluetooth Low Energy BLE and BMS (Battery Management System). When you join NSING, you will be part of a talented team in the Singapore R&D Center where we develop high performance MCU targeting for Industrial and Edge AI applications.

Your Role:
As an Embedded Software Engineer, you will contribute to the development of application test software, device drivers and customer reference software. You will be working in various aspects of the SoC development in FPGA prototyping, post silicon validation and customer reference applications.

• Work closely with SoC Design and Verification engineers to develop a comprehensive and complimentaryvalidation test plan.
• Participate in SoC design reviews to have in-depth understanding of the chip.
• Participate in PCB design review to provide requirements from software perspectives.
• Develop Hardware Abstract layer drivers for in-house testing as well as production ready SDK for customers.
• Validate new and existing hardware IP on FPGA prototype and actual silicon.
• Validate system level performance and test for robustness of SoC.
• Working with Product and Application team to develop software for the customer reference design in areas such as motor controls, Human Machine Interface (GPU), Edge Machine Learning applications.

Your Skills and Experiences:

• Bachelors or Master's degree in Electrical Engineering, Computer Engineering, or a related field.
• Minimum 3 years in firmware development in ARM-based MCU products.
• Minimum 2 years’ experience in the Semiconductor industry or equivalent technical knowledge/experience in electronics circuit design.
• Understanding of ARM architecture, heterogeneous multicore system, and communication interfaces such as USB, Ethernet, CAN, Bluetooth, SPI, I2C, UART, SDMMC will have an added advantage.
• Understanding of DVP, Graphics accelerator and machine learning models deployment.
• Worked with RTOS, device drivers, filesystems, HAL, security, and Software development cycle.
• Proficient in programming language of C, C++, and assemble language.
• Proven experience in common firmware development tools and lab tools, such as IDE (KEIL, IAR, GCC), Debugger (ULink, JLink), Lab equipment (Oscilloscopes, Programmable power supplies, Logic Analyzers etc.).
• Good with Electrical interface, schematic, electronic component specification and datasheet.

Other Skills:

• Strong analytical and problem-solving skills, with a keen attention to detail.
• Excellent communication and teamwork skills, with the ability to collaborate effectively in a cross-functional environment.
• Flexibility and adaptability and demonstrates ability to manage multiple tasks and projects, prioritizing effectively to meet deadlines.

• In-house Support IT
• Support and maintain WAN/LAN network links and equipment's
• Administration of the Servers
• Support and maintain the Firewall System
• Fault diagnosis and resolution of software and system errors on the desktop
• Fault diagnosis of desktop hardware and co-ordination of repairs and replacements
• Software installation and decommissioning of desktop hardware
• Outdoor / Onsite Project Support for IT Related Products
• Interactive Panel Firmware update
• Network Devices Firmware update
• IP configuration of network devices
• Support Product Preventive Maintenance
• Any other task assign by Superior

Position Overview:

We are looking for a passionate and motivated AI Engineer to join our team, focusing on innovative projects in image and video applications. In this role, you’ll contribute to the development and improvement of AI algorithms, working alongside experienced team members to create advanced solutions in image processing and computer vision.

Responsibilities:

• Assist in the development of algorithms for image and video processing, including tasks like image restoration, enhancement, and segmentation.
• Contribute to the design and implementation of computer vision and deep learning solutions, proposing ideas to improve algorithm performance and address practical challenges.
• Collaborate with software and hardware teams to support the optimization of algorithms for efficient, real-time performance on various devices.
• Participate in testing and refining algorithms to ensure they perform well across different conditions and environments.
• Work with software engineers to integrate algorithms into broader software systems, learning how to achieve smooth functionality and user experience.
• Stay updated on the latest advancements in AI and computer vision, sharing ideas that could be applied to future projects.

Qualification/ Requirements:

• Education: Master’s or Ph.D. degree in Computer Science, Electrical Engineering, or a related field.
• Relevant academic or project experience in image processing and computer vision, with hands-on work in areas such as image restoration, generation, enhancement, or segmentation.
• Proficiency in programming languages such as Python, with familiarity in deep learning frameworks like PyTorch or TensorFlow.
• Strong foundation in mathematical concepts, such as probability and optimization, with an eagerness to apply these skills in AI algorithm development.
• Enthusiasm for learning advanced AI techniques, including generative models (e.g., GANs, VAEs) and language-guided generation, with a proactive attitude towards skill-building.
• Effective communication skills and a collaborative mindset, with a passion for teamwork and innovation.
• Interest in image processing, computer vision, or multimedia technologies; personal projects or hobbies related to photography or similar fields are a plus.

EDP Renewables APAC is the main subsidiary of EDP Group, a global leader in the renewable energy sector and one of the world’s largest wind producers. With its headquarters in Singapore, EDP Renewables is the leading sustainable development hub for the Asia Pacific region with activities across nine different markets. Our activities are focused on the design, development, management, and operation of renewable energy sources, namely solar, wind, as well as new technologies such as storage.

EDP is a global energy group leading the Energy Transition, Innovation and Sustainability. Using the technology of the future, we create solutions highly focused on the needs of our people and our customers, never neglecting our role and contributions to society. To achieve our goals, we aim to attract diverse people with high potential through the professional opportunities we create.

Join us to be part of a renewable energy leader that reinvests in society through sustainable projects and social as well as cultural causes. You will have the opportunity to actively participate in our global transformation, by changing tomorrow now.

Manage construction of assigned projects from start of construction to Commercial Operation Date (COD), ensuring compliance with assigned targets in terms of schedule, cost, while making sure all the internal requirements (e.g. HSE) are fulfilled.

Responsibilities

• Track and monitor project schedules and budget, flagging out any potential deviations in terms of timings and costing, using the corporate tools and platforms
• Manage contractors and other third parties in an effective and efficient manner to ensure projects run smoothly
• Identify potential risks in terms of construction and progress, making sure these are flagged to the senior project manager
• Enforce quality checklists for review or inspection of solar projects
• Manage and interact with client throughout construction

Education/Experience

• Diploma or Bachelor’s degree in Engineering
• At least 3 years of working experience in construction / installation projects
• Prior renewable energy or construction industry experience, particularly solar preferred

Core Requirements:

• Proven track record of effective communications with project stakeholders
• Good project management skills with ability to report in a clear and concise manner
• Excellent interpersonal skills with strong verbal and written communication abilities
• Skilled in project management frameworks (eg. Gantt Chart/Scrum/PMP)

When you join EDP Renewables APAC, you will have access to:

• Professional experience in a leading global company in the renewables industry with flexible work conditions
• Recognition through remuneration compatible with the role and other additional benefits
• Opportunities for personal and professional development, e.g. cross-cutting projects, mobilities and volunteering

About EDP Group:

As a socially responsible company, we incorporate our values and practices with the principles of Diversity and Inclusion. To achieve all our objectives, we intend to attract, develop and retain different profiles, assuming diversity as a key factor and differentiator of fundamental innovation in our organisation. We welcome and value all people, and we are committed to the inclusion and sense of belonging of each person who is part of the EDP Group.

What makes us proud as an employer:

• TOP Employer APAC, Singapore 2024 certification
• TOP Employer Europe 2024 certification
• Bloomberg Gender Equality Index 2021
• Top Workplaces US 2021
• Certification in Conciliation (Excellence) by the Más Familia Foundation

Essential Duties and Responsibilities

• Responsible for software development lifecycle activities, including system study, analysis, design, code, test, and deployment for product using JavaScript, TypeScript, ReactJS, Redux, HTML5 and CSS.
• Work with project team members to identify product requirements and help define project scope, objectives, and plans accordingly.
• Write, analyze, optimize, and debug product application code to maximize performance and quality.
• Create automated unit tests and integration tests.
• Write and maintain the internal tools to diagnose software component issues, improve productivity of build and release.
• Document technical specifications and functional specifications
• Participate in agile planning and scope estimation for team projects.
• Mentor and execute in Agile, Lean, and Continuous Delivery best practices.

Requirements

• BS/MS in Computer Science/Engineering or related field
• 5+ years of software development experience in user interface application development using JavaScript, TypeScript, ReactJS, Redux, HTML5 and CSS.
• Experience in turning designs into responsive UIs with ReactJS /HTML5 / CSS (LESS)
• Experience in leveraging development workflow with tools like npm, webpack and Node.js.
• Experience developing in Node.js development.
• Experience with design patterns, performance/memory analysis, multithreading.
• Agile / Scrum experience including TDD, unit testing, and continuous integration.
• Strong analysis and problem-solving skills.
• Excellent interpersonal skills including verbal and written communication skill.
• Communicates well in English.

Bonus

• Experience in WPF/WCF and MVVM programming
• Experience on creating webview2 UWP apps.
• Experience in integrating with RESTful APIs

Company Description

Warwick Machinery Singapore Pte Ltd is the official distributor for DN Solutions , a leading manufacturer of state-of-the-art CNC machine tools used to produce high precision parts. We offer wide range of turning center, vertical and horizontal machining center, multi–tasking machines as well as automation systems.

We also provide full service care and advanced support and consulting.

Role Description

This is a full-time on-site role as a Sales Specialist at Warwick Machinery Singapore Pte Ltd in Singapore. The Sales Specialist will be responsible for day-to-day sales activities, including prospecting, lead generation, product demonstrations, and closing deals.

Qualifications

• Proven experience in sales and achieving sales targets
• Excellent communication and negotiation skills
• Knowledge of sales strategies and techniques
• Ability to build and maintain client relationships
• Strong organizational and time management skills
• Understanding of market dynamics and trends

Our client is a top-tier global pharmaceutical powerhouse, committed to pushing the boundaries of medical innovation and delivering breakthrough treatments to patients worldwide. Be a part of a mission to transform healthcare and make an impact on patients' lives.

As the Senior Production Engineer, you'll be at the forefront of R&D manufacturing operations.

Your Role:

• Manage R&D manufacturing operations and be a technical expert in the process.
• Refine manufacturing techniques, lead method validation projects, and be the go-to expert for training operators on Standard Operating Procedures (SOPs).
• Documenting crucial process safety and risk assessments, maintaining the highest standards of excellence.

Requirements:

• Background in a regulated manufacturing environment (pharmaceutical or biotechnology preferred).
• Master's or PhD in Chemistry, Chemical Engineering, or Pharmaceutical Sciences.
• 5+ years of hands-on experience in formulation development.
• In-depth understanding of GMP, process development, validation, and pharmaceutical quality systems.
• Proven track record in pharmaceutical formulation development and technology transfer.

If you are interested, please apply with your CV attached.

What you will do

1. DFT architecture exploration & evaluation for next-gen process node & package technology of MediaTek:

• Scan chain insertion & ATPG pattern generation
• Pattern validation through simulation & silicon analysis(pass/fail, shmoo, fail log, etc.)
• Diagnosis to help manufacture process improvement

2. Co-work with SoC architect, RTL designer, physical design engineer, and package engineer to define best architecture for 3D-IC:

• PPA(Performance/Power/Area) impact analysis & mitigation via DFT innovation
• Develop & integrate DFT-related RTL design modules to test chip

What you will bring

1. Master's Degree in EEE/ EE/ CE
2. Expertise in Synopsys and/or Mentor DFT tools, and HDL simulators like Synopsys VCS
3. Fluency in script language including but not limited to TCL/Perl/Python
4. Experience about MBIST with state-of-the-art SRAM structure & EDA tools is big plus
5. Skill for RTL design & integration, and physical failure analysis(PFA) will also be plus
6. Ability to think and work independently with different teams
7. Interest in understanding more details in entire design flow
8. Ability to use English for discussing technical details
9. More than 4-year industrial work experience is preferred

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The job holders are to work with PI and the research team to process air quality data and study small-scale dispersion of airborne pollutants in urban environment.

Qualifications

One or more of (but not limited to) the following:

• Bachelor Degree in Engineering or relevant field
• Experiences of (small-scale) simulations of air pollutant dispersion, meteorology modelling, data processing
• Demonstrating as a fast learner of conducting literature study and literature summary
• Experiences of handling big data via R, Python, Matlab, etc.
• Experience with UNIX-based operating systems and bash script or similar
• Strong interests in applying machine learning models and applications to atmospheric research
• Proactive in assisting and contributing to quality scientific research publications
• Proficient in technical presentation, slide making, report writing, etc.
• Proven rounded and effective team player with strong initiative and ownership of the research project

Job Title: Senior Maintenance Engineer (ID8358)
Location: Bukit Batok, Singapore
Working hour: Monday to Saturday, 8am to 8pm, however sometimes may required to work at off duty hours according to operation arrangement
Salary: $5500 - $6000

Job Description:
-Coordinate maintenance activities for facilities and equipment to ensure optimal performance and minimize downtime.
-Ensure the proper functioning and maintenance of machinery and equipment (such as genset, excavator etc) to support production and operational requirements.
-Coordinate tasks and resources across machinery & equipment maintenance team, and logistics & operations team to meet operational goals and deadlines.
-Oversee and ensure the Operations and Logistics adhere to safety measures during operations.
-Address operational issues and challenges, implementing solutions to maintain efficiency and productivity.
-As team leader in performing daily task, inclusive of daily reporting.
-Prepare & maintain machinery reporting & documents.

Requirement:
- Minimum of 2 – 5 years of experiences in excavator, heavy land machinery and equipment field.
· Possess knowledge on the procedures in maintenance of equipment & land machinery.
· Possess knowledge in logistics and operations will be advantages.
· Basic IT knowledge on software operating.
· Proficient in Microsoft Office application (Word, excel, powerpoint etc).
· Valid class 3 driving license (optional).
· People oriented, task oriented and possess positive work attitude.
· Strong organisational and communication skills.
· Ability to multitask, prioritize tasks, and manage time effectively.
· Problem-solving abilities and attention to detail.
· Willingness to travel to various project sites as required.

Job Title: Marine Technical Engineer (ID8359)
Location: Bukit Batok, Singapore
Must have technical and operations knowledge on marine vessel operations & maintenance
Salary: $3400 - $5000

Job Description:
- Managing and Overseeing daily vessel operations, including movements, documents and risk management.
- Ensuring compliance for Port state.
- Handling and checking ship and cargo documents, including customs compliance for international shipment, raise purchase procurement and purchase order for vessel request maintenance and repair.
- Tracking and reviewing of approved purchase requisition for all vessel.
- Assisting relevant departments with claims such as demurrage, cargo shortage, and commercial.
- Submitting monthly statistical reports, including operating rate statistics, demurrage and voyage reporting.
- Improving ship efficiency and reduce operational risk
- Engaging and deploying sea staff for vessel assignments.
- Managing planned maintenance system (PMS) repairs and maintenance activities documentation and report filling into marine department archive.

Requirement:
- Bachelor’s degree in Marine & Offshore Engineering, Mechanical Engineering, or a related field.
- Knowledge of international maritime regulations and environmental standards.
- Minimum 3-5 years hands-on experience with vessel operations, maintenance, or technical troubleshooting.
- Willingness to travel and work in challenging environments (e.g., shipyards or offshore).
- Proficient in English (Spoken and Written) & Microsoft Office.
- Team player and able to work within time constraints.
- Strong sense of integrity and professionalism.

What you do

Be part of the team that validates the physical sign-off of our chips, powering the brands we love every year with 2 billion consumer electronic products such as digital TVs, home audio devices, DVD/Blue-ray players, smartphones, tablets, networking and connectivity products, and many more. As a member of the MediaTek Physical Verification Sign-off team, you will be responsible for ensuring the manufacturability and reliability of IC designs through rigorous physical verification processes to enable the success of our chips tape-out. Join us in shaping the future of technology and making a real impact on the world!

• Responsible for assembling of various design system into a full chip.
• Perform design rule checking (DRC) to identify and resolve System-on-chip layout violations and ensure compliance with manufacturing rules and constraints.
• Conduct layout versus schematic (LVS) verification to ensure the accuracy and consistency between full chip layout and schematic of the IC design.
• Execute electrical rule check (ERC) to identify potential electrical issues and ensure the integrity of the design.
• Perform antenna and electrostatic discharge (ESD) checks to prevent potential reliability, latch-up, leakage issues.
• Collaborate with design and layout teams to address and resolve physical design issues and optimize the layout for manufacturability and reliability.
• Contribute to the development and improvement of physical verification methodologies and flows.
• Work closely with process technology teams to understand and address process-related challenges and constraints.
• Participate in tape-out activities and ensure that the physical design meets the required quality and reliability standards for fabrication.

What you bring

• With minimum 8 years of relevant experience.tronic Engineering / Computer Science or equivalent..
• With minimum 8 years of relevant experience
• Solid understanding of physical design concepts, IC manufacturing processes, and semiconductor device physics.
• Proficiency in using physical verification tools such as Calibre, IC Validator, or other industry-standard DRC/LVS tools.
• Experience with scripting languages such as TCL, Perl, or Python for automation and tool customization.
• Strong problem-solving skills and the ability to analyze and debug complex physical design issues.
• Excellent communication and teamwork skills to collaborate effectively with cross-functional teams.
• Familiarity with EDA (Electronic Design Automation) tools and design methodologies is a plus.
• Proficient in UNIX (Linux) platforms.
• Strong communication skills, problem solving and analytical skills.

Location: One North, Singapore

Who We Are

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

Job Description & Requirements

Responsibilities

• Management of approval, process and documentation for utilities & services.
• Liaise with utility agencies/authority on services/ relocation/installation of utility and services.
• Supervise utility diversion and trial trench works.
• Ensure safe and uninterrupted utilities supply to site.
• Develop operational SOP/Procedures for utilities/services works.

Requirements

• Degree in Civil Engineering or Mechanical Engineering with minimum 3 years of experience in underground utilities matter.
• Understand basic code compliance in Architectural, C&S and M&E works and construction sequence of work.
• Registered earthwork supervisor with EMA/SPPG and with relevant road construction experience.
• Positive attitude and good discipline and good team player
• Good interpersonal skills
• Preferred Candidate with LTA experience

Responsibilities

· Design, testing and qualify PCBA/ module in accordance with design specification

· Work closely with peers, such as software, firmware, and mechanical engineering, to design a medical robot.

· Develop and maintain design documentation, including requirements, design documents, and test plans.

· Ensure compliance with relevant industry standards and regulations, such as FDA and ISO standards.

· Collaborate with other functional teams (mechanical design, process, software, manufacturing, and purchasing, etc.) to achieve project goals.

· Produce engineering outputs (BOM, CAD, WI etc.) for manufacturing of products.

· Navigate regulatory testing for Electrical Safety, Functional Safety, Radiated/ Conductor Emission & Immunity.

· Collaborate with product management and stakeholders to identify and prioritize new features and functionality for the robot.

Competency Requirements

· Master’s/ bachelor’s degree in electrical/ Electronic Engineering or other relevant discipline

· >5 years’ experience in product design and development, fresh graduates with keen interest in electrical design are welcome to apply.

· Strong working knowledge with microcontrollers, digital and analog circuitry design

· Strong working knowledge of firmware development

· Strong working experience in CAD software and PCB layout are preferred.

· Strong hands-on skills in debugging/ troubleshooting/ design verification are required.

· Able to work with other discipline to

· Able to provide guidance to junior engineers on development of product.

· Able to work independently, self-motivated and collaborate with peers in design team to design a product in accordance with specification.

· Experience in regulatory test is welcome.

The Snr Systems Engineer manages the systems administration function and leads the organisation's system projects and environments. He/She focuses on setting goals and priorities and on mentoring and coordination as well as providing technical leadership. He/She plans and oversees systems upgrades and migrations and ensures systems are up-to-date with the latest patches and are coherent across the organisation. He/She directs the development and maintenance of technical documentation.

He/She possesses strong leadership and communication abilities, and is able to set realistic goals and implement appropriate plans to guide the team toward achieving those goals. He/She is able to address multi-faceted issues effectively and in a collaborative manner including across departments. Set system administration processes

Role and Responsibilities:

Set system administration processes

• Establish goals and priorities, design, planning, day-to-day operation, maintenance, and advanced troubleshooting of systems

• Align system administration with overall strategic IT service direction and business needs

• Assist with the development of business case justifications and cost/benefit analyses for spending and initiatives

• Anticipate internal and/or external business challenges and/or regulatory issues

• Develop policies, procedures, and controls to ensure system security

Develop New Systems

• Partner with stakeholders to recommend innovative and automated approaches for system administration

• Define systems requirements for new technology implementations

• Prepare for system expansion by studying plans and requirements

• Oversee the design, maintenance and implementation of the systems

• Prioritise tasks to ensure projects are implemented in accordance with project plans and budgets

Optimise Systems Performance

• Recommend process, product or service improvements, resource optimisation and cost savings

• Oversee hardware and software upgrades

• Recommend new technologies, methodologies, systems or opportunities for cost savings, security and service quality improvement

Manage Teams

• Oversee team management including budgets, forecasting, work allocations and staffing

• Develop staff through ongoing coaching, mentoring and career discussions

• Define common goals, direction and accountability among staff

• Drive effective performance management practices within department in accordance with company policies and procedures

Requirements / Qualifications

• Degree in Information Technology or related

• Candidates must have at least 6 years of hands-on experience in Linux with ability to work with the project team in implementation projects as well as perform system administration activities for Linux systems. Knowledge in SAP will be advantageous but not required.

• At least 6 - 8 years’ experience in developing, implementing and maintaining IT systems

Responsibilities

· Responsible for creation/ modification/ improvement of work instructions based on feedback from stakeholder(s).

· Responsible for building on medical robot/ controller unit/ cart.

· Ensure production quality and consistency.

· Provide feedback to development team on product improvement base on production flow.

· Maintain production documents.

· Analyze production process and propose production improvement plan.

· Troubleshoot production discrepancy/ variance.

· Conduct in-process verification on modular and system level.

· Program controller units

Competency Requirements

· Responsible for creation/ modification/ improvement of work instructions based on feedback from stakeholder(s).

· Responsible for building on medical robot/ controller unit/ cart.

· Ensure production quality and consistency.

· Provide feedback to development team on product improvement base on production flow.

· Maintain production documents.

· Analyze production process and propose production improvement plan.

· Troubleshoot production discrepancy/ variance.

· Conduct in-process verification on modular and system level.

· Program controller units

As a Senior Piping Engineer, he/she shall act as key person of the project as designated by Piping Department Manager and Lead Piping Engineer and performs the function inherent to this position. Responsible for the preparation of major piping layout, MTO sketch, and 3D CAD model review on piping system, equipment and structure, and interference detection. Has the technical responsibility for interpreting and evaluating stress/ vibration result, for reviewing piping layout, and piping information. He/She will also be responsible for reviewing piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, for providing technical guidance, and for organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

Duties and Responsibilities:

• To study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.
• To assist in planning and organizing piping engineering activities and manpower requirement for the project.
• To assist in developing piping engineering and design schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.
• To coordinate piping design and engineering effort with other area Lead Engineers and disciplines of the project as directed by Piping Design Supervisor.
• To prepare piping information list and layout and document list following standard procedure created for the project.
• To prepare piping general specification inclusive of specification for piping arrangement, piping support standards.
• To interpret and evaluate stress/vibration analysis result and provides necessary recommendation on resolving the method of analysis.
• To develop conceptual routing, piping layout and piping information of major critical equipment of the project such as tower/column, airfin coolers, heaters, compressors and reactors, preferably in 3D CAD format.
• To check and review all work such as piping layout and information prepared by Engineers, 3D model, MTO, BQ and other deliverables of the project for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To provide field engineering support/advice towards piping installation and testing at construction site.
• To perform the function inherent to Piping Key Person as designated by Piping Department Manager and Lead Piping Engineer.
• To evaluate the performance of and provide counseling and guidance to members of the project.
• To prepare lesson learned upon completion of the project and recommend preventive actions to avoid recurrence on future projects to Piping Design Supervisor.
• To perform other tasks that may be assigned by the Department Manager and Lead Piping Engineer.
• To carry out engineering support work during the construction phase of the project.

Requirements:

Education:

• Bachelor degree of any four years BS Engineering course preferably Mechanical Engineering or at least ten (10) years related experience and/or training; or equivalent combination of education and experience.
• Minimum of eight (8) years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support, three (3) years of which in a supervisory capacity.

Skill Requirements:

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Good Knowledge of AutoCAD.
• Good knowledge of SP3D.
• Basic knowledge of 3D Model review through Naviswork or SPR.
• Interpretation of stress/vibration analysis report.
• Ability to read, analyze, and interpret common technical information, contracts reports and instructions.
• Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communications.
• Strong leadership qualities and analytical and reasoning abilities.
• Good interpersonal and communication.

Assist with infrastructure planning and design

• Assist with the planning and design of infrastructure systems
• Assist with the documentation of infrastructure design and planning activities and decisions

Support infrastructure operations

• Perform infrastructure operations activities such as installations of infrastructure systems according to design specifications
• Align infrastructure operations with agreed service agreement standards

Maintain infrastructure

• Perform activities related to ongoing maintenance of infrastructure
• Assist with the implementation of agreed infrastructure changes and maintenance routines

Optimise infrastructure performance

• Perform ongoing tuning and optimisation of infrastructure hardware and software components such as updates and upgrades
• Participate in infrastructure development activities
• Assist with infrastructure testing and implementation
• Gather performance and data usage statistics for capacity planning and reporting
• Assist with piloting of new tools, technologies, and/or processes

Resolve incidents

• Perform problem/issue identification and resolution
• Assist with simulation of user problems to resolve operating difficulties
• Follow up with users to ensure problem has been resolved
• Recommend system modifications to reduce user problems

Requirements

• At least 6 years' of experience in the Network Management and Support Services, Unified Communication, Wirecenter maintenance
• Strong knowledge and experience in supporting Cisco Switch, Cisco Router, Fortigate Firewall, Palo Alto Firewall, ClearPass NAC, F5 VPN, IPS, WLC, Access Point and VSS/VLAN Architectures.
• Network Support in the areas of wireless, wired, VPN
• Network certifications eg CCNE, CCNA

Job Responsibilities:

• Communicate with the system users to understand the scope of projects
• Collaborate with Software Developers and support teams to resolve any issues on the product
• Monitoring the product testing for applications and software systems
• Perform performance testing using automated test scripts and testing tools
• Documented defects or bugs found during testing to the Software Developers
• Responsible for the execution of manual and automated tests to verify software functionality and performance
• Working towards departmental and project deadlines
• Create and execute test scripts to ensure software quality
• Providing objective feedback to softtware developers and stakeholders

Job Requirements:

• NITEC/Diploma in Technology, Engineering, Computer Science or related field
• Preferably some experience in software/product testing
• Strong verbal and written communication skills with the ability to liaise with a variety of stakeholders
• Posses problem solving and competent technical skills
• Attentive to detail and ability to work under pressure
• Ability to communicate in Mandarin in order to commuicate with our peers from our HQ in Taiwan

Duties & Responsibilities:

Principal

• Occasionally establishes and prepares basis of design and/or estimation and design philosophy and requirements prior to execution of electrical detailed engineering works.
• Occasionally performs electrical system studies including value engineering to determine most cost-effective design but still conforms to Client requirements.
• Normally prepares key electrical engineering documents like Key Single Line Diagrams, Conceptual Layouts, Substation Layouts and, system diagrams for Fire Alarm and Communication Systems in accordance with Client and Project requirements to facilitate the execution of electrical detailed engineering works.
• Normally prepares specifications, data sheets, requisitions, technical evaluation reports and vendor data review of major substation electrical equipment in accordance with Client and project requirements and applicable codes and standards.
• Normally establishes estimation basis and prepares technical proposals for proposal projects in accordance with Client requirements and acceptable estimation and engineering practices.
• Normally coordinates with other discipline, vendors and/or sub-contractors to ensure conformity with project and Client requirements.
• Normally acts as KP of medium to large sized standard projects, exceeding 5,000 electrical engineering manhours.
• Perform discipline project control (schedule, BM/BQ & manhour) when assigned as Project Lead Engineer.
• Assists in implementation of Department training programs by functioning as a “trainer” or "mentor".
• Supports major phase of construction work, can assume responsibility as the Electrical Site Superintendent, Electrical QA/QC in charge, and Lead Field Engineer.
• Acts as the home base Lead Support Engineer when the major phase of the project has been shifted to site, such as purchasing of additional major equipment / material, coordinate / expedite vendors for the immediate supply of material exceptions, resolving major engineering conflicts within the approved specifications.
• Participates in site survey/ investigation of existing facilities to clarify feasibility of the design
• Participate in factory acceptance tests of electrical equipment to confirm suitability of equipment and ensure that the equipment is manufactured according to the agreed specifications.
• Performs other functions that may be assigned by superiors.

Competencies / Preferred Skills:

• Proficient in Microsoft Office Skills, AutoCAD and/or Microstation and common electrical calculation software.
• Familiar with local and international electrical codes, standards and regulations.
• Proficient in the design of electrical systems for oil/petroleum/industrial infrastructure industries.
• Familiar with ETAP and e-DPP software.
• Proficient in substation energization work.

Education Qualifications and other Requirements:

• Bachelor’s degree in Electrical Engineering.
• 15 years and above experience in electrical detailed engineering works of Oil & Gas, petrochemical and other related industrial plants, including five (5) or more years in frontend engineering and proposal / estimation works and additional five (5) or more years infield engineering works.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Position Overview:

We are seeking a highly motivated Embedded System Engineer to join our team as a Research Engineer. The successful candidate will be responsible for selecting, programming, testing micro-controllers, and building corresponding circuitry and PCB for our cutting-edge research projects. This role offers an exciting opportunity to contribute to groundbreaking research in flexible electronics.

Key Responsibilities:

• Program micro-controller for realizing target functions.
• Design circuitry and PCB for corresponding micro-controller.
• Help with requirement analyse and micro-controller chip selection.
• Document design processes, results, and findings for academic publication.
• Stay updated on emerging trends and technologies in flexible electronics and related fields.

Qualifications

Qualifications:

• Master C/C++, have proficient embedded development and MCU development capabilities, and good programming habits.
• Familiar with communication ports, including UART, SPI, IIC and GPIO.
• Able to read hardware schematics, capable for driver writing and optimization, and familiar with Renesas, Nordic and STM32’s commonly used chips;
• Familiar with BLE working principle and commonly used BLE chips.
• Familiar with micro-controller developing tools (e.g. Keil, IAR)
• Experience with PCB design and proficiency in PCB design tools (e.g. Altium Designer)
• Bachelor's or Master's degree in Electrical and Computer Engineering, Electronics Engineering, Mechatronic Engineering, automation, or related field.
• Solid digital and analogue circuit knowledge foundation.
• Excellent problem-solving skills and attention to detail.
• Effective communication and collaboration abilities.

Preferred Qualifications:

• Expertise in MATLAB or Python for upper computer software development.
• Familiarity with biomedical signal processing or wearable electronics.
• Prior research experience in an academic or industrial setting.
• Additional expertise in wireless electronics design

Benefits:

• Competitive salary based on qualifications and experience.
• Opportunities for professional development and growth.
• Collaborative and innovative work environment.
• Access to state-of-the-art research facilities and resources.
• Potential for authorship on research publications, patents and presentations.

Job Description:

• Responsible for developing and optimizing ion-implantation and rapid thermal anneal (RTA) processes to support IME's various program requirements.
• Responsibilities include diagnosing malfunctions and using test equipment or software to test faulty hardware parts, applying knowledge of the functional operation of the Ion implanter and RTA equipment.
• Collaborates closely with vendors to optimize equipment performance and reduce tool downtime.
• Setup and execute design of experiments (DOEs) at various dose, energy, tilt, and twist levels, and evaluate experimental data to meet required process specifications.
• Responsible for analyzing test data related to implant-related defect formation, and quantifying and minimizing defects.
• Champion process window characterization and evaluation to drive quality and yield improvement.
• Closely collaborate with process integration teams to implement technology roadmaps, define process capability requirements, and address structural implications and constraints related to ion-implantation and RTA processes.
• Work with fab team in establishing statistical process control for ion-implantation and RTA processes.
• Generate and present reports to both internal and external customers.

Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3 years direct industry experience in ion-implantation, RTA and SiC MOSFET fabrication is preferred.
• Extensive proficiency in medium and high energy/current ion implantation, and RTA processes, including a comprehensive knowledge of equipment, equipment parts, and troubleshooting techniques to minimize equipment downtime.
• Good understanding of wide bandgap semiconductor materials and their corresponding dopant species.
• Expertise in ion channeling, ion bombardment, and their impact on the implant species profile.
• In-depth comprehension of defect formation and annihilation processes in the implanted region of semiconductors.
• Familiarity with essential device properties resulting from ion implantation and RTA processes.
• Understanding of the hardware of ion-implantation and RTA systems is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, Ellipsometry is advantageous.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Job Description:

• Responsible for developing and optimizing ion-implantation and rapid thermal anneal (RTA) processes to support IME's various program requirements.
• Responsibilities include diagnosing malfunctions and using test equipment or software to test faulty hardware parts, applying knowledge of the functional operation of the Ion implanter and RTA equipment.
• Collaborates closely with vendors to optimize equipment performance and reduce tool downtime.
• Setup and execute design of experiments (DOEs) at various dose, energy, tilt, and twist levels, and evaluate experimental data to meet required process specifications.
• Responsible for analyzing test data related to implant-related defect formation, and quantifying and minimizing defects.
• Champion process window characterization and evaluation to drive quality and yield improvement.
• Closely collaborate with process integration teams to implement technology roadmaps, define process capability requirements, and address structural implications and constraints related to ion-implantation and RTA processes.
• Work with fab team in establishing statistical process control for ion-implantation and RTA processes.
• Generate and present reports to both internal and external customers.

Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3 years direct industry experience in ion-implantation, RTA and SiC MOSFET fabrication is preferred.
• Extensive proficiency in medium and high energy/current ion implantation, and RTA processes, including a comprehensive knowledge of equipment, equipment parts, and troubleshooting techniques to minimize equipment downtime.
• Good understanding of wide bandgap semiconductor materials and their corresponding dopant species.
• Expertise in ion channeling, ion bombardment, and their impact on the implant species profile.
• In-depth comprehension of defect formation and annihilation processes in the implanted region of semiconductors.
• Familiarity with essential device properties resulting from ion implantation and RTA processes.
• Understanding of the hardware of ion-implantation and RTA systems is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, Ellipsometry is advantageous.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

• In charge of the operational procurement process for ship’s requirements.
• Negotiate / communicate with suppliers specifying quality, quantity, and delivery schedules
• Schedule, arrange, and follow-up on logistics to ensure cost effective and timely delivery of
• items on board
• Monitor schedules of the assigned group of vessels to optimize deliveries on board
• Proactively participate in department meetings and other activities.

Summary

This position is accountable for preparing the detailed Construction plans in accordance with the JGCAP’s company policies as the key person under the direction by JGCAP’s Site In-charge/ Project Manager and coordinating all construction activities on site among all JGCAP’s disciplines including subcontractors using his technical experiences and construction know-how and ensuring the completion of the work on schedule.

The detail plans as described above are as follows:

• Execution formation with the direction by JGCAP’s Site In-charge/ Project Manager.
• Outline of the Construction & sequence of work.
• Temporary facilities plan (If require) and subcontracting Plan.
• Manpower mobilization plan.
• Construction equipment mobilization plan.
• Work closely with the project scheduler on construction schedule and progress reporting.
• Constructability studies and plans, coordinate with Project Engineers and other related discipline as and when necessary.
• Scaffolding plan.
• Reflect the constructability plans in the inquiry for subcontracting.
• Preparation of documents such as specifications, procedures, manuals and etc.
• Erection plan of extra heavy equipment, inclusive of haulage plan.
• HSSE work control plan including rules and promotion plan together with JGCAP’s Site HSSE personnel.
• Coordinate with Project team of vendor specialists for work which need vendor specialist support.

Duties & Responsibilities:

• Initiate the subcontractors sourcing, inquiry package issuing, work scope clarification, sub-contractors evaluation & selection, cost negotiation and PO issuance.
• Work scope clarification & confirmation, BQ verification and construction direct & indirect cost estimation.
• Initiate Project’s Kick off meeting with the selected subcontractor and coordinating with selected subcontractors to ensure they are in line with company or project strategies and planning. Discussing and clarifying the detail of scope of work, execution plan, commercial issue and technical issue to minimize potential future conflict.
• Carry out constructability studies, construction activities planning and execution plan for the job.
• Coordinating with all engineering disciplines to ensure design, cost and client’s requirement can be achieved.
• Handling of issued drawings or field change sheet to ensure latest drawings to be applied.
• Work closely with the team member and subcontractor to prepare all the MSRA required for the project.
• Working closely with scheduler, subcontractors and clients to plan ahead and schedule critical work paths in order to avoid delays or obstructions on mechanical completion.
• Day to day management of the site, including supervising and monitoring the work progress, site labour force and any work of subcontractors.
• Overseeing quality control and health and safety matters on site.
• Maintain knowledge on all contract terms and legal requirements for project to avoid any delay in projects.
• Identify and resolve all technical issues in Construction process.
• Liaising with clients and company project team, including attending regular meeting and submitting reports to keep them informed of progress and construction issues.
• Liaising with any vendors, consultant, supervisors, subcontractors and the general workforce involved in the project.
• Assist the JGCAP’s Site In-charge/ Project Manager to monitor and manage the overall construction cost, including subcontractors’ progress billing, construction expenses and cost of variation order.
• Prepare and submit the weekly and monthly progress/construction reports to management.

Education Qualifications & Other Requirements:

• Degree in Mechanical engineering or equivalent.
• Over 3 years’ relevant experience in construction management field.
• Experience in oil and gas or chemical projects.
• Knowledge in construction planning.
• Knowledge and experience in sub-contracting work.
• Proficient in MS Office, MS Powerpoint and schedule reporting.
• Clear awareness of construction management tools and method of execution.
• Familiar with Construction Practices.

Interested parties, please send in your detailed resume.