1. Perform piping design and pipe support design.

2. Interpret and develop PFD & P&ID.

3. Apply international standard and practices such as ASME, ANSI code. Familiar with pipe / tank specifications, nozzle specifications and orientation of nozzles.

4. Perform Material Take Off (MTO) from piping drawings.

5. Perform pipe stress analysis and surge analysis.

6. Responsible for reviewing of piping/mechanical documents and specification from clients and consultants.

7. Responsible for review and check of all piping/mechanical documents and drawings from vendors and suppliers.

8. Prepare technical datasheet and specification.

9. Co-ordinate with engineers of either disciplines within the department.

10. Liaise with clients, consultants, sub-contractors to resolve technical issue at site or in office.

11. Lead and interface within inter-disciplines for all technical matters.

12. Pre-procurement preparation including evaluation of technical and commercial bid from vendor and supplier.

13. To provide engineering support in tendering of new project such as preliminary design, material and cost estimates etc.

14. Provide technical support to project team for on-going projects and resolve any technical issue on site.ue on site.

HLPS is the appointed dealer for Engine Dynamometers from USA like World-famous brand of Taylor and PowerTest which are used by Cummins, Caterpillar, Perkins, MAN, Port of Authority (Singapore) etc in Singapore.

It is also an appointed dealer for Mitsubishi generating set and aftermarket services in Singapore.

HLPS members advise on the genset business for Taiwan listed company like Solomon Technology Corporation (TPE 2359) and for Hong Kong listed company VPower Holdings (1608.HK).

It has an established arm to deal with Genuine spare parts of Cummins, Mitsubishi Heavy Industries, Caterpillar, MTU etc.

In line with our continued growth and expansion, we are looking for experienced and dedicated Mechanical Engineer/Electrical Engineer to join our Singapore team.

Job description:

· To manage maintenance and engineering activities for mechanical/electrical facilities in plants for safe and smooth operations.

· To coordinate and execute major field maintenance works with no compromise to safety of workers and integrity of facilities.

· Respond to customer emergency calls and resolve technical issues/troubles within tight schedule.

· Draft technical documents such as service report, inspection plans and test reports for internal review.

· Develop maintenance plans for building (M&E) systems to ensure they continue to function properly after construction.

· Conduct and arrange training for staff and contractor to enhance their skill and competency levels.

· Conduct site inspections to ensure construction progress and quality is maintained.

· Oversee site delivery, installation, testing and commission of components and its systems.

· Ensure all systems meet local and national codes and regulations.

Requirements:

· Possess a Degree/Diploma in Mechanical or Electrical Engineering.

· Minimum 3 years of relevant work experience in the equipment maintenance servicing of mechanical facilities in the construction and power industry.

· Hands on experience in troubleshooting and repair of static equipment and rotating equipment such as diesel engines, heat exchangers, pumps, compressors and blowers.

· Proficiency in Microsoft Office applications and Auto CAD software skills will be advantageous.

· Essential prerequisites include good analytical & problem-solving skills, ability to communicate with staff in different functions & contractors, and a strong spirit of collaboration & teamwork.

Other info:

· Work location: East of Singapore

· Possess valid class 3 or 4 driving license

· Work Hours: Mon-Sat (9am-6pm, 9am-1pm- Sat)

· Only shortlisted candidates will be contacted.

• To carry out electrIcal related detailed design and preparation of drawing
• To interpret and develop P&ID, technical data sheet preparation and I/O wiring diagram
• To carry out electrical calculation for the design
• Responsible for reviewing of electrical documents and specification from clients and consultants
• To check and review all electrical related drawings and documents from suppliers and vendors
• To liaise with clients, consultants, sub-contractors to resolve technical issue at site and in office
• To co-ordinate with engineers of other disciplines within the department
• To prepare Pre-procurement including evaluation of technical and commercial bid from vendor and supplier
• To provide engineering support in tendering of new projects such as preliminary design, material and cost esimates etc
• To provide technical support to project team for on-going projects and resolve any technical issue on site
• To assist in preparation of project schedule, related work procedure/method of statement and monthly progress claim

• To handle the full spectrum of project management
• To lead a site Management team to complete the project on time and within budget
• To inspire and motivate the site team to work effectively and efficiently
• To enforce appropriate measures so as to comply with the required standard of safety in execution of tasks.
• To drive high productivity on site using relevant cost saving methods at all times.
• To ensure that the documented Quality and workplace health and safety (WHS) policies are effectively implemented, maintained and reviewed.
• To ensure the Project Quality and WHS objectives are being met and any discrepancies are being addressed immediately.
• To ensure that the overall phases of the project is effectively coordinated and organized.
• To liaison with the client, consultant, suppliers (sub-contractors) and other relevant authorities on management issues pertaining to the project.

Requirements:

• Degree / Diploma in relevant Engineering discipline.
• Must have at least 5 years of post-graduate experience in project management
• Ability to handle Projects independently.
• Ability to display initiative in execution of tasks and being pro-active in the delivery of tasks
• Dealing professionally in managing tasks and consistently meet tight deadlines
• Attention to details and good problem solving skills

• To carry out instrumentation related detailed design and preparation of drawing
• To interpret and develop P&ID, technical data sheet preparation and I/O wiring diagram
• To carry out instrumentation calculation for the design
• Responsible for reviewing of instrumentation documents and specification from clients and consultants
• To check and review all instrumentation related drawings and documents from suppliers and vendors
• To liaise with clients, consultants, sub-contractors to resolve technical issue at site and in office
• To co-ordinate with engineers of other disciplines within the department
• To prepare Pre-procurement including evaluation of technical and commercial bid from vendor and supplier
• To provide engineering support in tendering of new projects such as preliminary design, material and cost esimates etc
• To provide technical support to project team for on-going projects and resolve any technical issue on site
• To assist in preparation of project schedule, related work procedure/method of statement and monthly progress claim.

· Minimum 7 years of relevant experience

· Responsible for the planning activities within a project and organisation planning across all projects.

· Provide project Progress S curve, activity list, logic diagram (PERT , CPM), time scaled logic diagram, Bar chart, manpower histogram, resource and cost curves.

· Publish the planning weekly report of all projects and disseminate to key stakeholders.

· Overall project coordination liaising with engineering, procurement and construction team for the purpose of developing a fully integrated schedule.

· Follow through construction, commissioning, qualification and handover.

· Obtain input from project team members, contractors, suppliers and client to support the development of a baseline schedule, and subsequently to update schedule progress and forecasting.

· Use planning/scheduling principles and methods including: CPM scheduling techniques, Resource loading of schedules, Field Progress Measurement.

· Analyse critical path and highlight to project team.

· Coordinate and support the preparation of monthly spending plan curve.

· Provide a regular management update on the progress of the major activities in process improvements and quality improvements

· Any other tasks as assigned by your Superior/s

Responsibilities:

• Site viewing , co-ordination and oversee ongoing job progress for AV products
• Termination, testing, commissioning and project handover
• Perform preventive maintenance

Requirements:

• "O" Level/ITE/Diploma/Entry level preferable with electrical experience
• Computer/electrical/electronic knowledge will be added advantage
• Preferably possess Class 3 license
• Able to plan & work with sub-contractor to complete the project within a given time frame
• Possess good interpersonal and organization skills
• Good soldering skill on audio & video connectivity
• A good team player customer orientated

SPECIFIC RESPONSIBILITIES:

• ensures all drawings, bills of materials, purchase requisitions and quality checks are completed as per project schedule and ISO 9001 processes.
• conducts Design Reviews to analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting component designs and the procedures and instructions to be followed.
• confers with customer representatives to review specifications and answer questions pertaining to installation of systems.
• supports during manufacturing, assembly, de-bug, and customer buy-off.
• writes technical reports, manuals and technical support documentation
• performs a wide variety of additional functions to meet project schedules and product deliveries
• reads, understands, and acts upon mechanical drawings including piece part and assembly drawings, work instructions, and procedures
• determines manufacturing methods, techniques, and procedures as required to perform tasks as required for to ensure designs perform as required
• designs test fixtures and setups as needs arise
• communicates with vendors to support procurement and to address issues
• Responsible for any other role as assigned by the Operations Manager

Electrical Engineer Responsibilities:

• Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.
• Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.
• Conferring with customers, engineers, and others to discuss existing or potential engineering products or projects.
• Ensuring that installation and operations conform to standards and customer requirements by preparing electrical systems specifications, technical drawings, or topographical maps.
• Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.
• Ensuring compliance with specifications, codes, or customer requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.
• Writing reports and compiling data regarding existing and potential electrical engineering projects and studies.
• Preparing specifications for purchases of electrical equipment and materials.
• Supervising or training project team members.
• Estimating material, labor, or construction costs for budget preparation.
• Maintaining electrical equipment.
• Working with a variety of technicians.

Electrical Engineer Requirements:

• Bachelor's degree in electrical engineering degree from an accredited school.
• Licensed as a professional engineer.
• Experience in using or a desire to learn the required software.
• Knowledge of applicable codes related to electronic engineering.
• Proficient in design and calculation software.

Job Title: Costing & Manufacturing Engineer (ID5022)
Location: Gul Circle
Working Hours: Mon to Fri, 8am to 5pm
Salary: $3200 - $5000

Job Description:

This position is responsible for deciding the manufacturing sequence, routing, estimation, submission of quotes and close follow up on enquires to win orders. The Costing & Manufacturing Engineer is responsible to create job routings for confirmed orders in line with the quoted scope and customer bill of materials. This is a fast paced customer facing position.

• Perform costing of jobs.
• Responsible for submission of quotes and customer’s point of contact for clarifications as well as purchase order.
• Perform order processing from quotation to delivery.
• Create manufacturing process routings and job completion in ERP system.
• Liaise with customers and vendors on order requirements.
• Responsible for assigned customers’ sales revenue and margin targets.
• Liaise with operations team on high profile sales order manufacturing plan.

Requirement:
• Degree in mechanical engineering / manufacturing engineering (Diploma holders with similar industrial experience will be considered)
• Good understanding of precision machining processes.
• Well versed with manufacturing process & good understanding of material specifications common to Oil & Gas industry.
• Good communication and interpersonal skills.
• Self-driven individual with a positive learning attitude.
• Excellent spreadsheet skills with basic knowledge in ERP systems.
• Minimum 2 years of relevant experience in Oil & Gas machining or similar Industry.
• Candidates with no experience (Mechanical Engineering discipline) are also welcome to apply. On the job training will be provided.

Able to perform Installation, Test/Commission, Preventive and Corrective Maintenance (PM & CM), repair and troubleshoot on healthcare equipment/system.

· Respond, monitor and resolve recurring problems to ensure ongoing customer satisfaction.

· Plan and schedule PM or CM.

· Provide post-sales support when require.

· Liaise and coordinate with manufacturers, vendors, contractors, customers for projects.

· Assist project team in project execution.

· Attend to service calls.

· Collaborate & gather feedback/prospect and share with team members

· Any ad-hoc duties or calls as assigned.

Requirements

· NITEC/Diploma in Electrical/Electronic Engineering or equivalent

· Experience with software assisted technical service diagnostic & testing equipment.

· Minimum 2-3 years’ experience in relevant field. Entry level candidates with willingness to learn are welcome.

Able to perform Installation, Test/Commission, Preventive and Corrective Maintenance (PM & CM), repair and troubleshoot on healthcare equipment/system.

· Respond, monitor and resolve recurring problems to ensure ongoing customer satisfaction.

· Plan and schedule PM or CM.

· Provide post-sales support when require.

· Liaise and coordinate with manufacturers, vendors, contractors, customers for projects.

· Assist project team in project execution.

· Attend to service calls.

· Collaborate & gather feedback/prospect and share with team members

· Any ad-hoc duties or calls as assigned.

Requirements

· NITEC/Diploma in Electrical/Electronic Engineering or equivalent

· Experience with software assisted technical service diagnostic & testing equipment.

· Minimum 2-3 years’ experience in relevant field. Entry level candidates with willingness to learn are welcome.

Job Title: Senior Project Engineer (ID5034)
Location: Ubi
Working Hours: Mon to Fri 8.30am – 6pm
Salary: $3500 to $4500


Job Description:
The role and responsibilities include, but are not limited to,
• To manage projects, monitor progress and ensure smooth completion.
• To coordinate the works of a multi-disciplinary workforce including consultants, external subcontractors and etc.
• To handle project risk management and issues escalation.
• To ensure safe work procedures and environmental control measures are implemented at work site.
• To provide project status update to management accurately and in a timely manner.
• To attend to maintenance issues during DLP.
• To assists in products specification and datasheet.
• Any other ad hoc duties assigned by Manager.


Requirement:
• Min Diploma holder in Electrical / Electronic / Mechanical Engineering
• At least 5 years’ experience as Project Engineer in local construction industry
• Motivated to work in challenging, fast paced and result-driven environment
• Good communication and interpersonal skills
• Knowledge of lighting an advantage
• Knowledge of software an advantage, eg. Autocad, Photoshop, Dialux

Job Title: Service Engineer (ID8136)
Location: Jurong East
Working Hour: 5 days work Monday-Friday 8:30am – 6 pm
Salary: $3000 - $4000

Job Description:
• Manage after-sales and service activities.
• Responsible for Equipment installations pre-commissioning checks and commissioning on sites.
• Coordinating field work involving troubleshooting, reporting and resolution of any emergent warranty issues.
• Responsible and manage warranty claims and matters and liaising with HQ on any warranty claims and reports.
• Technical back-up to field service staff to ensure technical queries are attended and settled prompt.
• Ensure completion of service task and submission report/expenses.
• Prepare quotation for service and spare parts enquiries.
• Customer relationship management
• Identifying training needs for service engineers/agent. Provide training for customers and staff.
• Contributes to team effort by accomplishing related results as needed

Requirement:
• Diploma /Technical Certificates in Engineering or equivalent
• Min. 5 years relevant experience in servicing of equipment (electrical/electronics/mechanical)
• Good written, verbal, and presentation skills in English.
• Knowledge in Microsoft Office basic applications, including Word, Excel, Power-point.
• Demonstrate good skills and ability in technical troubleshooting
• Able to handle Chinese and dialect speaking customers
• Possess Class 3 driving license

Job Description

• Candidate must possess at least Bachelor's Degree in Engineering (Civil & Structural) from local or recognized foreign universities subject to Client's approval
• 2 years & above working experience in the related field is required for this position
• Perform Engineering Design and drawings
• Project coordination and documentation
• Perform building/site inspections.
• Attend progress meetings.
• Work related travel and meetings
• Any other duties as assigned

Job Requirement

• Keen to learn and work independently with minimum guidance.
• Able to work under pressure, dynamic, creative and results oriented.
• Conversant in regulatory requirements and building codes.
• Good knowledge of AutoCad and Revit.
• Possess Class 3/3A driving license preferred.

Responsibilities

Design, control, and implement electrical systems and products

Develop manufacturing processes according to global engineering codes and standards

Manage engineering projects and deliver them on time

Define customer needs and requirements

Ensure that installations and applications are in line with customer needs and safety standards

Collaborate with engineers and technicians to design and apply new system processes

Perform quality and performance analysis on new and legacy IT systems

Summarize data and report on test results

Examine needs on new equipment, calculate costs and help prepare budgets

Monitor maintenance and inspection plans

Requirements and skills

Proven expertise as an electrical engineer

Hands-on experience using design and calculation software

Deep knowledge of electrical manufacturing processes

Understanding of electrical engineering codes and safety standards

Problem-solving abilities

Attention to detail

Strong organizational and communication skills

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing support on maintenance project.
• Responsible for handling system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.

Requirements

• Min Diploma in Electrical/Electronic Engineering, Computer Science/ Information Technology or equivalent.
• Min 2 years of working experience in managing LAN / WAN / Routers / Switches / DNS / Firewall and Milestone System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing software for automated semi-conductor process equipment.
• Responsible for improving equipment performance through CIPs and other development initiatives
• Responsible for supporting field work to upgrade and resolve customer issues.

Requirements

• Min Diploma in Electrical & Electronics Engineering/Computer Studies or equivalent.
• Min 5 years of working experience in programming on Windows (XP and above) environment.
• Experience in C++, VC++, MFC, SQL, OOP, using Servo, Stepper Motion Controller, Analog Device and High Speed I/O
• Knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing windows applications in .net technologies mostly used for manufacturing equipment
• Responsible for developing solutions to improvise performance & scalability of systems
• Responsible in full system development life cycle
• Responsible for conducting applications training and handle enquiries for technical issues
• Responsible for supporting on site installation, debugging and hand technical support

Requirements

• Min Diploma in Information Technology or related
• Min 2 years of working experience in C#, C++, .Net
• Experience in developing windows Based application

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing windows applications in .net technologies mostly used for manufacturing equipment
• Responsible for developing solutions to improvise performance & scalability of systems
• Responsible in full system development life cycle
• Responsible for conducting applications training and handle enquiries for technical issues
• Responsible for supporting on site installation, debugging and hand technical support

Requirements

• Min Diploma in Information Technology or related
• Min 2 years of working experience in C#, C++, .Net
• Experience in developing windows Based application

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for analysing, troubleshooting and resolving stamping issues to achieve productivity, quality and cost targets.
• Responsible in assisting in stamping tool design reviews for new product development
• Responsible for establishing process capability, optimum parameter setting, mill cost, Bill of Material (BOM) and work instruction for dies and processes.
• Responsibel in identifying and proposing cost reduction program and upgrading to achieve quality and competitive cost to meet present and future stamping requiremen
• Responsible for providing technical guidance and training to juniors technicians and toolmakers

Requirements

• Min Nitec in Production/ Manufacturing/ Mechanical Engineering/ Tool and Die Making
• Min 5 years of working experience in Stamping Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for improving manufacturing process and equipment capability to achieve higher production yield and quality
• Responsible in driving cost reduction programs through continual improvement activities
• Responsible for supervising plating technicians and operators in meeting manufacturing requirement

Requirements

• Min Degree in Chemical Engineering/ Mechanical Engineering or relevant
• Min 2 years of working experience in plating industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026