Job Description

• Scope of Work: NPI (New Product Introduction) and mass production, for assigned product (module, sub-assembly, or instrument level).
• Product Quality, Yield, and Cycle Time: Lead cross functional team to drive continuous product and quality performance improvement i.e. factory yield, DEFOA, warranty/Annual Failure Rate and production efficiency (yield and cycle time).
• Product Development: Collaborate with R&D in product development and validation throughout product life cycle. Works with R&D to design, develop and release new tools or process technologies and is a resource for risk assessments and design for manufacturability. Provide engineering support throughout the product development process. Influencing the design of the product and/or process to ensure manufacturability and conformance with the global supply chain, enabling prototyping while in the R&D lab, testing the reliability of prototypes, scale-up, and managing the transition into production. Develop manufacturing and test for new product i.e. responsible for the development of product manufacturing process, assembly fixture/tooling and test system. Design test procedures to optimize test time or troubleshooting. Actively participating in design reviews and providing input on electronic circuit designs and obsolescence redesigns. Develop product test plans and perform production tests based on manufacturing process instructions. May drive alignment between the NPI strategy and internal stakeholders as well as external suppliers.
• Product Sustenance: Provide technical support to day-to-day product issues. As the technical owner, provide technical support to all product related issue, which include customer quality issues, production line trouble shooting, product/part/process change validation, etc. Maintain compliance to quality standards through proper execution of test methods, procedures, training, qualification etc. May be assigned as the technical leader to assist operating manager or as project lead for new or current product engineering and improvement i.e. equipment and test enhancement, NPI, product transfer, Value Engineering Projects or CPE (current product engineering) projects.
• Support and implement the transition of products and manufacturing processes from prototype to full production (NPI) and through the entire life cycle of the product. including influencing the design of the product to ensure manufacturability and conformance with the global supply chain, product test methodology and tester development, enabling prototyping while in the R&D lab, testing the reliability of prototypes and managing the transition into production.
• Supply Chain related: Collaborate with procurement and material engineering in the specification, sourcing and qualification of materials used in the design and production of Agilent products to meet quality, cost and manufacturability goals.
• Process Improvement and Compliance, Lean Manufacturing: Ensure compliance with engineering change order (ECO) procedures and work instructions. Collaborate with design engineering to transition design prototypes into cost-efficient, manufacturable (DFx) high-volume products. Implementing Lean Manufacturing principles within the plant. Design jig/fixtures for new product, to ensure product manufacturability. Supports and implements the transition of products and manufacturing processes from prototype to full production and through the entire life cycle of the product. May redesign products to meet cost objectives, obsolescence, and customer requirements. Utilizes digital solutions to optimize and maintain state of the art manufacturing processes. Performs a variety of engineering duties to support manufacturing operations. Improves products, processes and applications to meet agreed-upon objectives.
• Other tasks and responsibilities assigned by manager in support of business needs.

Qualifications

• Education: Employers typically prefer candidates with Bachelor's or Master's Degree or University Degree or equivalent in the field of Electrical & Electronic Engineering. Candidates with Mechanical, Mechatronic Engineering, Physics or Computer Science qualifications with strong product engineering experience are also encouraged to apply.
• Certifications: Relevant certifications can enhance your qualifications. Examples include ASQ, QC/QA, EMC, and EMI.
• Knowledge in 6Sigma / Engineering Statistics (PFMEA, SPC, DOE, Process Capability), Value Stream Mapping, Qualification of equipment and Process Validation would be added advantages.
• Skills: Desired skills include knowledge of probability and statistics, board-level product qualification procedures, manufacturing processes, and familiarity with tools like Microsoft Office and pythons. Knowledge in designing test fixture and tools is added advantage.
• Experience: At least 5+ years relevant experience, especially in manufacturing or operation environment and new product introduction, is valuable. Mass spectrometry, vacuum system, electronics and test is desirable. Process characterization and validation using tools such as Cp/Cpk, and Design of Experiments techniques have added advantage. Product test methodology, test software and tester development are advantageous.
• Passionate, innovative, systematic problem-solving and leading on continuous improvement. Self-starter and proven track record of results in setting, implementing complex engineering projects and achieving the goals and demonstrated levels of creativity.
• Must possess strong engineering and analytical skills. Ability to multitask, prioritize and work independently.
• Strong team player with good interpersonal skill and excellent collaboration, oral and written communication skills.

* Managing the planning and design stages of construction projects.

* Contributing technical expertise to project drawings and designs.

* Performing cost calculations and preparing financial projections.

* Preparing work schedules in collaboration with the project manager.

* Liaising between contractors, subcontractors, vendors, and suppliers.

* Overseeing construction engineering processes.

* Performing regular tests on materials and procedures to ensure compliance with industry regulations.

* Ensuring that the construction project is completed on time and within budget.

* Documenting processes and keeping detailed construction logs.

* Presenting construction project progress updates to clients and senior managers.

* Managing the planning and design stages of construction projects.

* Contributing technical expertise to project drawings and designs.

* Performing cost calculations and preparing financial projections.

* Preparing work schedules in collaboration with the project manager.

* Liaising between contractors, subcontractors, vendors, and suppliers.

* Overseeing construction engineering processes.

* Performing regular tests on materials and procedures to ensure compliance with industry regulations.

* Ensuring that the construction project is completed on time and within budget.

* Documenting processes and keeping detailed construction logs.

* Presenting construction project progress updates to clients and senior managers.

* Managing the planning and design stages of construction projects.

* Contributing technical expertise to project drawings and designs.

* Performing cost calculations and preparing financial projections.

* Preparing work schedules in collaboration with the project manager.

* Liaising between contractors, subcontractors, vendors, and suppliers.

* Overseeing construction engineering processes.

* Performing regular tests on materials and procedures to ensure compliance with industry regulations.

* Ensuring that the construction project is completed on time and within budget.

* Documenting processes and keeping detailed construction logs.

* Presenting construction project progress updates to clients and senior managers.

* Managing the planning and design stages of construction projects.

* Contributing technical expertise to project drawings and designs.

* Performing cost calculations and preparing financial projections.

* Preparing work schedules in collaboration with the project manager.

* Liaising between contractors, subcontractors, vendors, and suppliers.

* Overseeing construction engineering processes.

* Performing regular tests on materials and procedures to ensure compliance with industry regulations.

* Ensuring that the construction project is completed on time and within budget.

* Documenting processes and keeping detailed construction logs.

* Presenting construction project progress updates to clients and senior managers.

* Managing the planning and design stages of construction projects.

* Contributing technical expertise to project drawings and designs.

* Performing cost calculations and preparing financial projections.

* Preparing work schedules in collaboration with the project manager.

* Liaising between contractors, subcontractors, vendors, and suppliers.

* Overseeing construction engineering processes.

* Performing regular tests on materials and procedures to ensure compliance with industry regulations.

* Ensuring that the construction project is completed on time and within budget.

* Documenting processes and keeping detailed construction logs.

* Presenting construction project progress updates to clients and senior managers.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Job Description:

We are a well-established no-code app development platform, seeking a highly skilled and adaptable Senior AI Integration Specialist to enhance our platform's capabilities through seamless integration of AI technologies. As a key member of our experienced team, you will be responsible for designing and implementing the integration of various AI functionalities to cater to our users' specific needs.

Responsibilities:

• Lead the integration of AI technologies into our no-code app development platform.
• Collaborate closely with the development team to identify integration requirements and implement efficient solutions.
• Customize AI functionalities to align with our platform's objectives and user interaction flows.
• Design and implement robust backend infrastructure to support AI functionalities' seamless performance within our platform.
• Conduct extensive testing to ensure the reliability and accuracy of integrated AI features.
• Continuously monitor and optimize AI performance to enhance the overall user experience.
• Stay updated with the latest advancements in AI technologies and apply relevant innovations to our platform.

[5:11 PM] Bryan Goh

JD for machine learning engineer: (Generated by chatgpt)

Job Title: Senior AI Integration Specialist

Job Description: We are a well-established no-code app development platform, seeking a highly skilled and adaptable Senior AI Integration Specialist to enhance our platform's capabilities through seamless integration of AI technologies. As a key member of our experienced team, you will be responsible for designing and implementing the integration of various AI functionalities to cater to our users' specific needs.

Responsibilities:

• Lead the integration of AI technologies into our no-code app development platform.
• Collaborate closely with the development team to identify integration requirements and implement efficient solutions.
• Customize AI functionalities to align with our platform's objectives and user interaction flows.
• Design and implement robust backend infrastructure to support AI functionalities' seamless performance within our platform.
• Conduct extensive testing to ensure the reliability and accuracy of integrated AI features.
• Continuously monitor and optimize AI performance to enhance the overall user experience.
• Stay updated with the latest advancements in AI technologies and apply relevant innovations to our platform.

Requirements:

• Bachelor's or Master's degree in Computer Science, Engineering, or a related field.
• Proven experience in integrating AI technologies into web-based or mobile platforms.
• Proficiency in programming languages like Python, Java, or JavaScript.
• Familiarity with cloud-based infrastructure and services.
• Strong problem-solving skills and adaptability to meet dynamic project requirements.
• Excellent communication and collaboration skills to work effectively within a team.

Nice-to-Have Skills:

• Experience with integrating language models like ChatGPT or other AI chatbots.
• Knowledge of dialogue systems, natural language generation, and user experience design.

If you are an experienced AI Integration Specialist with a track record of successfully integrating AI technologies into established platforms, we invite you to apply. Join our team and contribute to expanding our no-code app development platform with the power of AI, delivering even more value to our users.

As a Process Engineer you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization/development to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with equipment/material suppliers to achieve yield, quality, cost and risk management objectives.

Micron’s NAND Technology Integration (NTI) Singapore R&D group is looking for process development engineer to support R&D activities associated with rapid deployment of technology nodes, the process margin improvement work necessitated thereof as well as to ensure extended engagement with manufacturing on the upcoming technology nodes.

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND products.
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing CVD/PVD teams on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise R&D Films peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise R&D to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough solutions.

Requirements

• Master degree or higher in Materials Science, Chemical/Microelectronic Engineering, or Physics with minimum 3 years hands-on experience in leading edge film deposition/implant technology work. Fresh PhD/Masters graduates in Materials Science, Chemical/Microelectronic Engineering or Physics are also welcome to apply.
• A deep understanding of chemical kinetics, thermodynamics, physical phenomena and their direct application to CVD/PVD deposition in various deposition methods.
• An ability to understand and troubleshoot precursor depletion effects within three dimensional structures and come up with innovative ideas to mitigate the effects.
• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM.
• Understanding of various integration and structural impacts and constraints related to film deposition processes.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise R&D for 4-6 months at a stretch to work on technology development.

Test Solution Engineers develop and maintain wafer level test programs to test functionality of NAND Flash products.

The general responsibilities of the position include but are not limited to the following:

• Develop and maintain wafer level functional test strategies and programs for semiconductor NAND Flash products
• Collaborate with various engineering and production groups to ensure test program, infrastructure and system readiness for new product introduction as well as high volume manufacturing
• Improve device yield, reliability and quality through test condition optimization, advanced redundancy analysis schemes, data analysis and test equipment hardware optimization
• Provide cost effective and innovative solutions for production test flow optimization with cutting-edge test time reduction methodologies
• Develop and release test programs to production in a timely manner
• Assist process and production teams by providing necessary engineering expertise to ensure smooth manufacturing operations

Requirements:

• Bachelor’s or Master’s Degree in Electrical, Electronics, Computer Engineering or any related engineering field
• Good programming skills; C/C++ knowledge will be an added advantage
• Solid analytical problem-solving skills
• Excellent verbal and written communication skills
• Good understanding of semiconductor device physics will be an added advantage
• Knowledge of Unix/Linux environment will be an added advantage

About Micron

As the leader in innovative memory solutions, Micron is helping the world make sense of data by delivering technology that is transforming how the world uses information. Through our global brands — Micron, Crucial and Ballistix — we offer the industry’s broadest portfolio. We are the only company manufacturing today’s major memory and storage technologies: DRAM, NAND, NOR and 3D XPoint™ memory. Our solutions are purpose built to demonstrate the value of data to unlock financial insights, accelerate scientific breakthroughs and enhance communication around the world.
We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Directs and coordinates engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment and control devices. Determines conditions under which tests are to be conducted, and phases of test operations. Coordinates operational, functional and performance phases of tests. Analyzes and interprets test data. Prepares technical reports of for use by engineering personnel.

Job Description:

• Report to the Senior Project Manager/Project Director
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation, and execution of works on site
• Coordination, supervision & monitoring of the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor and suppliers on all project implementation issues and attend site meetings when required
• Coordinate all submissions
• Produce weekly site progress reports and necessary submissions
• Attend meetings, and conduct site inspections on work progress to ensure quality control by authority requirements.

Job Requirement：

• Degree in Engineering or equivalent
• Entry Level or 1-2 Years of working experience in the related field is required for this position
• Experience in reinforced concrete building and architectural design is an advantage
• Able to work well under pressure
• Independent with good communication skills
• Good organizational and planning skills
• Effective communication, coordination skills and teamwork
• Able to work 6 working days
• Able to work overtime/shift rotation

Equipment Engineer (WET / Plating)

Position Summary:

Lumileds is seeking a highly-qualified Lead Equipment Engineer to take responsibility for Operations Engineering under Lithography and WET Engineering Module.

In this role, you will handle daily equipment related operations, and work with process engineers and shift team to sustain and improve the module KPIs.

What You Will Do

• Equipment owner of WET and Plating (Nexx Plating, WET bench, SSEC, D-Sonic/HPS, DRYER, WTJ, SEMSYSCO, SRD, OVEN, SCOPE, Thickness Tools).

• Attend equipment related issues in production line.

• Work with process engineer on improving the yield loss, quality concern and process induced defects.

• Responsible for machine Uptime, MTBF, MTTR.

• Perform machine repairs, troubleshooting to achieve minimal downtime.

• Identify equipment failures, pareto of issues and weak point analysis for improvement.

• Collaborate with vendors, parts suppliers to reduce equipment cost of ownership.

• Establishing good equipment controls of such as corrective and preventive maintenance procedures.

• Lead and execute improvement projects that reduces cost of equipment ownership and equipment performance.

• Responsible for new equipment purchases, installation and buy-off.

• Develop and monitor operating budget.

• Develop good equipment training program to bring up good maintenance skill among associate engineers and technicians.

• Mitigate risk capacity and capability bottleneck.

• Conformance to 5S and safety rules and regulation.

• Complies with environment, security, health and safety requirements.

• Any other duties assigned by the Engineering Manager.

What You Will Bring (Required Qualifications):

• Experience working on WET, SSEC, and Plating tools.
• Experience in leading a group of technicians and engineers in equipment maintenance program will be an added advantage.
• Knowledge of semiconductor/wet and plating process flow.
• Experience with structuring maintenance operations, especially preventive maintenance systems and/or TPM will be advantageous.
• Hands-on experience in equipment maintenance or troubleshooting.
• Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.
• Good interpersonal and analytical skills.
• Ability to work independently, be hands-on and expected to dive into technical details as required.
• Additional experience in Lithography equipment will be an advantage.

Education:

• Bachelor's Degree
• Diploma holder with relevant experience who able to demonstrate the right skills are welcome to apply.

Field of Study

• In any relevant field of Equipment Engineering

Years of Experience (Minimum)

• 3 years

Lumileds is an Equal Employment Opportunity Employer

Job Description

• Support the project team in the purchase of equipment, materials, and services
• Maintain accurate records of procurement activities
• Assist in the preparation of purchase orders and other procurement documents
• Coordinate with suppliers in pricing and to ensure timely delivery of goods and services
• Assist in the management of supplier relationships
• Assist in the development of procurement strategies and policies
• Research potential suppliers and products
• Assist in equipment inspections and registrations

Job Requirement

• Prefer 2 years of experience in procurement
• Proficiency in Microsoft Office, especially Excel
• Able to start immediately or within a short notice period
• Candidate will be based at office

Responsibilities:

• Performs all SQS work assignments in accordance with the standard work procedures, practices and specifications
• Review of Vendor Documents for Compliance to project requirements/ spectification and international standards
• Implements and adminsters the Quality Assurance Plan manifested by QA Supervisor for field and participates on a day to day basis in quality assurance activities.
• Review and approval of quality related specification, painting procedures, SAT and FAT procedures, NDT procedures, EIT related documents, pre com and commissioning documents
• Prepares and issue QAQC reports
• Organizes and perform audits and surveillance at a supplier's (or their sub suppliers) facility to verify compliance with qualification requirements
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor's Degree in Naval Architecture / Marine and Offshore / Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment
• Well conversant with codes & standards like ASME, API, ANSI, AWS, IACS, ABS, NR etc

Our Addresses and Working Hours:

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description

Responsibilities and Tasks:

- Represent Fab10 on the assigned category in collaboration work with Frontend Operations network.
- Ensure site centric projects and activities are regularly shared to SPMO network through aligned platform and infrastructure.
- Ensure network activities that are of value to your site are implemented
- Lead and ensure program & project performance to the planned schedule, cost, and scope.
- Plan and schedule program/project timelines and record achievements using appropriate tools.
- Provide program & project performance updates periodically with communication across functional groups.
- Communicate with all key partners to request feedback and maintain positive working relationships.
- Lead and control program changes including scope, plan, business rules, policies and procedures.
- Work with the project teams to identify project risks and evaluate solutions.

Experience with structural steel design, drawing, specs, details, etc

a) Connection details

b) Steel Structural Details

c) Foundation Details

d) Shop Fabrication Drawings

e) Site Erection Marking Plans & Elevations

f) Interfacing and coordinating with Customers and other external drafting services on various technical matters.

g) Produce/Prepare cutting plans for rolled sections & plate parts.

h) Perform materials take-off to procurement purposes.

As a Process Integration Module Engineer in the Process Integration department, you will be responsible for coordinating improvements in Yield, Quality, and Output for the NAND Flash production line. Day-to-day responsibilities include but not limit to designing and analyzing process experiments, teaming with YE and PQA to investigate yield and quality problems, and working with production and process engineering teams to ensure the smooth operation of the fab.

Requirement: Bachelor's in physics, Chemistry, EEE and Material Science

Responsibilities and Tasks

Collaborate with cross-functional teams from PIE, PEE, WLR, TD to improve product yields and reliability within your assigned process loop.

Communicate module related issues to the Fab engineering and leadership teams.

Design, execute, and analyze experiments to improve fab process, yield, and quality.

Collect and interpret complex data to optimize Fab processes and increase yields.

Engage and/or lead cross-area engineering teams to solve process issues.

Work closely with global partners to stay current on module related topics and process alignment projects.

Collaborate with other PI module owners and sister fabs to drive business process alignment

Partner with IE, PEE and Production to better forecast and balance yield, output and process issues

As a Data Science Engineer at Micron, you will employ techniques and theories drawn from areas of mathematics, statistics, semiconductor physics, materials science, and information technology to uncover patterns in data from which predictive models, actionable insights, and solutions can be developed.

You will interact with experienced Data Scientists, Data Engineers, Business Areas Engineers, and UX teams to identify questions and issues for data analysis projects and improvement of existing tools. In this position, you will help develop software programs, algorithms and/or automated processes to cleanse, integrate, and evaluate large datasets from multiple disparate sources. There will be significant opportunities to perform exploratory and new solution development activities.

Primary Responsibility, but not limited to

Designs, develops, and programs methods, processes, and systems to consolidate and analyze unstructured, diverse “big data” sources to generate actionable insights and solutions for client services and continuous improvement. Interacts with stakeholder to identify questions and issues for data analysis and experiments. Develops and codes software programs, algorithms, and automated processes to cleanse, integrate and evaluate large datasets from multiple disparate sources. Identifies meaningful insights from large data and metadata sources; interprets and communicates insights and findings from analysis and experiments to product, service, and business managers.

• Master’s degree in computer science, Computer Engineering, Statistics, Electronics Engineering, or other quantitative fields.
• Strong desire to grow a career as a Data Science Engineer in highly automated industrial manufacturing doing analysis and machine learning on terabytes and petabytes of diverse datasets.
• Experience in the areas: statistical modeling, feature extraction and analysis, supervised/unsupervised/semi-supervised learning.
• Hands-on experience with Scikit-Learn, SciPy, Keras, Pytorch, TensorFlow etc.
• Ability to extract data from different data sources and applying data cleansing, outlier identification, and missing data techniques.
• Familiar with SQL and NoSQL queries.
• Fluency in Python.
• Experience in data visualization using packages such as Tableau, Python echarts/highcharts/matplotlib, etc.
• Strong verbal and written communication skills
• 6-year+ experience in data analytics/market intelligence is a plus.
• Exposure to the semiconductor industry is a plus but not a requirement.

Job Description:

As a Senior DDQA (Development and Design Quality Assurance) CMOS Reliability Engineer, you will be primarily responsible for developing and optimizing quality and reliability criteria related to CMOS process for the next generation of Micron's memory parts. You will be partnering with Technology Development (TD) on latest products and technologies related to CMOS Front end/interconnect module and define quality and reliability fail modes especially NUDD (New, Unique, Different, Difficult) with goal to mitigate risk and achieve product qualification milestone successfully. You will also be required to identify, diagnose, and resolve CMOS related problems by applying failure analysis, FMEA or 8D methodology. In this position, you will be working in a highly collaborative atmosphere, interacting with various groups such as Technology Development (TD), Process Integration, electrical and physical failure analysis, Product Engineering, Quality Reliability Assurance Team to develop product that meets Quality and Reliability specs and requirements.

Responsibilities include, but not limited to:

• Drive new CMOS devices or modules for the future technology of NAND from Product Quality and Reliability perspective.
• Define & implement Reliability test methodology for validating the risk of new CMOS module for the next generation of Micron's memory parts.
• Provide insights and guidance to the Global Quality (GQ) management team on topics involving CMOS.
• Interact and collaborate with Design Team, TCAD, modeling, and layout teams to drive clearer definition of CMOS device and reliability improvements across multiple tech-nodes and designs.
• Develop/re-define inline and electrical critical specifications criteria for optimum product performance and drive activities to get them to manufacturing process capability.
• Characterize and validate new CMOS device, models, and test structures for developing future NAND products.
• Develop, establish new CMOS Param or optimize scribe design for CMOS parameters.
• Collaborate with various stakeholders and provide DDQA independent assessment on Quality & Reliability items in various technology development milestones (EPP, SVC, MSC, VME), escalate issues and collaborate for timely risk mitigation and resources, also provide inputs for Leaderships in making decision on passing the Qual milestone (Low Tier Qual/High Tier Qual/Auto Qual etc).
• Support technology transfer to production facilities (some international travel may be required).
• Partner with multiple stakeholders in Process Conversion Review Board Meeting (PCRB) to improve coverage from various aspects of product quality and reliability and prevent post qual escapes or excursion triggered by conversion.
• Identify gaps and drive initiatives/programs/business process to build margin around structural, electrical, and reliability performance.
• Build Product Fail Modes Repository based on NUDD (proactive) and previous issues (reactive), and work with key stakeholder to prevent issues or implement effective detections controls and containment.
• Deliver a new Product Fail Modes Repository and their Effective Detection Controls and Containment Document to meet technology development and Transfer timeline.
• Partner with Manufacturing (MFG) or Central Quality teams on current high-volume products to sustain and further develop the Product Fail Modes Repository through regular refresh meeting.

Minimum Qualifications:

• 4+ years’ experience in semiconductor related engineering.
• Hands-on experience on advanced CMOS engineering and device reliability, integration or characterization, specialized in Microelectronics and Semiconductor Device Physics is a requirement.
• Direct fab experience with nonvolatile memories manufacturing, knowledge of TCAD, K2 view layout, and NAND product are highly desirable.
• Understanding of Reliability items for CMOS and Array
• Understanding of electrical specifications, Probe and Param registers
• Knowledge of 3D NAND Fab processes, flow and common reliability and yield fail modes is preferred.
• Highly skilled at problem-solving activity and capability of leading cross functional team.
• Understanding on technical risk assessment, FMEA, and 8D methodology for root cause analysis and problem solving.
• Effective verbal and written communication skills in English.
• Good multitasking skills and ability to set priorities in a fast moving, dynamic environment.
• Ability to work independently, with minimal direction, and a focus on meeting commitments.
• Real passion for improving product quality to increase customer satisfaction.

As a Central Quality data analytic engineer, your main responsibility will be as follows:

• working with enormous data and conduct analytics on sophisticated datasets to assist AT to better understand operation. These involve providing solution(s) to pressing manufacturing process issues to drive yield and quality improvement programs particularly on test triggers governance.
• You will identify, collect and engineered both structured and unstructured datasets from separate sources to make available in Big Data platform for user query and analysis. In the process, you may build visualization for business insights and needs.
• You may also build and implement frontier's predictive analytics model, strategy and operation to identify untapped opportunities and expose hidden risk buried inside vast amount of data.
• Develops, evaluates, revises, and applies technical quality assurance protocols/methods to inspect and test in-process raw materials, production equipment, and finished products.
• Ensures activities and items are in compliance with both company quality assurance standards and applicable government regulations.
• Performs analysis and identifies trends in the inspection of finished products, in-process materials and bulk raw materials, and recommends corrective actions.
• Ensures that established manufacturing inspection, sampling and statistical process control procedures are followed.
• May assure compliance to in-house and/or external specifications and standards, such as GMPs and ISO regulations.
• Evaluates and analyzes the efforts in organizing, documenting, and interpreting inspection support documents and records.

As Global Front End Central Quality (FECQ) Process Control System (PCS) Engineer at Micron Technology, Inc., you will be accountable for improving the process control for all Micron Fabs.

You work with Front End Fabs and other central teams resources to provide direction and assistance with process control systems and help coordinate control systems across multiple facilities globally.

In this position, you will be tasked with driving SPC program, working with SMAI/IT/vendor for application improvement & upgrade that is aimed at reducing overall product variation which will result in higher process margins, increased yield and reliability as well as productivity.

As FECQ PCS engineer, you will be expected to lead the SWAT, develop and deploy BKM of PCS. You also need to establish metrics, provide coaching and training of BKMs.

Responsibilities:

Support Strategic Process Control System Responsibilities

• Support the PCS roadmap for world-wide alignment and continuous improvement of process control practices.
• Evaluate global needs and cultivate global relationships.
• Support and mentor PCS teams worldwide by providing guidance.
• Work with subject matter experts to identify business process gaps and Best Known Methods (BKMs) to address.
• Evaluate the quality of data collected, drawing conclusions based on this data and initiating follow-up action items.
• Partner with QRA, OCT PEE, cPIE, SMAI and IT to ensure all business needs are properly documented, validated, and escalated as needed.
• Determine if project objectives have been met or if more effort is required.

Process Control Engineer Responsibilities

• Provide direction on the facilitation of practical application of PCS disciplines of SPC, PCS or Metrology Sampling within MFG environment.
• Partner with Site Quality, OCT PEE, cPIE, and IT to ensure all business needs are properly documented, validated, and escalated as needed.
• Facilitate root cause identification activities on fabs related excursion to ensure proper reaction PCS actions are followed through on.
• Be able to support PCS-SPC teams worldwide by providing guidance in PCS solutions such as inline detection methodology through SPC, statistical techniques for establishing proper limits for different type of distributions to improve inline detections.
• Co-lead SWAT and work with Subject Matter Experts to identify business process gaps and Best Known Methods and facilitate communication plan for all SWAT activities to/from stakeholders, participants, and management.
• Refine Program/SWAT charter, and build roadmap going forward for world-wide alignment and continuous improvement of process control practices.
• Drive and lead SPC Program for alpha site to achieve variation reduction goals to support the Cpk and yield.

Demonstrate Individual Competence/Technical Expertise

• Provide technical consulting and hands-on assistance to Fab PCS teams for creation and/or identification of best PCS solutions/Statistical methods, troubleshooting existing PCS solutions, and deployment of PCS solutions.
• Define PCS software requirements for Corp IT. Act as the liaison between SWAT team and Corp IT team; provide technical expertise to assist IT with understanding the SWAT’s current and future needs.
• Evaluate PCS solutions - third-party software and hardware selection.
• Recognize functional and business process gaps. Formulate proposals for closing them.
• Increase technical expertise by participating in classes conferences, and researching existing literature and existing Micron expertise.

Program Management

• Demonstrate ability to move projects effectively through project lifecycle – initiate, plan, execute, and close – while balancing time, cost, quality, scope and risk/opportunity constraints.
• Motivate stakeholders and all project team members to take ownership of project and its success.
• Direct and coordinate the activities of others to accomplish project tasks successfully.
• Define metrics to gauge project success.

Communication

• Provide periodic updates based on project criticality to stakeholders and team members on project status, progress, and roadblocks/opportunities..
• Offer and communicate strategic ideas and thinking to meet corporate objectives. Listen to customer’s and stakeholder’s input/feedback and act to maximize benefit to Micron and meet corporate goals.
• Build and maintain external and internal relationships to broaden influence and increase learning opportunities in the PCS area.
• Provide communication to the World-wide PCS group on PCS lessons learned, project repositories, summits, new technologies, conference proceedings and Best Known Methods (BKMs).
• Demonstrate cultural sensitivity - Show respect for different cultures and languages.
• Communicate effectively with vendors/suppliers. Understand and use appropriate communication channels (other Central Team members, Purchasing, etc.). Clearly and accurately communicate Micron’s needs and objectives to vendors/suppliers. Adheres to company ethics and confidentiality policies regarding vendors/suppliers.

Requirements :

• Bachelors Degree or equivalent experience in Engineering or related field of study
• 5 years experience in Process Control Engineering.
• A Process/Equipment Engineering background and experience.
• An understanding of Fab processes and tools.
• Familiarity with area and Fab software applications, such as SPACE, GeRM, Sigma, JMP, SoV, ORION, and Yield 3.
• Strong analytical problem-solving skills.
• Self-motivated and people oriented: have strong persuasive and diplomatic communication skills (oral, written, one-on-one, and group).
• Been recognized as an individual who obtains results through the coordination of successful teams.
• Good time-management skills.
• Good judgment.
• Above average working relationships with co-workers.
• A high level of self-motivation with a good work ethic.
• The ability to work unsupervised and support production needs