Job Description

• Scope of Work: NPI (New Product Introduction) and mass production, for assigned product (module, sub-assembly, instrument level) for LCMS.
• Product Quality, Yield, and Cycle Time: Lead cross functional team to drive continuous product and quality performance improvement i.e. factory yield, DEFOA, warranty/Annual Failure Rate and production efficiency (yield and cycle time).
• Product Development: Collaborate with R&D in product development and validation, and provide engineering support. Works with R&D to design, develop and release new tools or process technologies and is a resource for risk assessments and design for manufacturability. Influencing the design of the product and/or process to ensure manufacturability leveraging global supply chain, enabling prototyping and run manufacturing and realiability test, scale-up, and manage prototype transition into production. Develop manufacturing and test for new product i.e. responsible for the development of product manufacturing process, assembly fixture/tooling and test system. Design test procedures to optimize test time and troubleshooting. Actively participate design reviews and provide input on electronic circuit designs and obsolescence re-design. Define manufacturing process and test and product test plans. Support and implement the transition of products and manufacturing processes from prototype to full production, and through the entire product life cycle.
• Product Sustenance: Performs a variety of engineering duties to support manufacturing operations. Provide technical support to day-to-day product issues and all product/manufacturing process related issues, which include customer quality issues, production line troubleshooting, product/part/process change validation, etc. Maintain & improve product quality. Redesign products/processes to meet cost objectives, obsolescence, and customer requirements. May be assigned as the technical leader to assist operating manager or as project lead for value engineering or CPE (current product engineering) projects, product/process improvement, product/process transfer, equipment and test enhancement, New Product Introduction.
• Process Improvement/Digitalization and Compliance, Lean Manufacturing: Ensure compliance to engineering change order (ECO) procedures and work instructions. Collaborate with R&D to transition design prototypes into cost-efficient, manufacturable (DFx) high-volume products. Implementing Lean Manufacturing principles within manufacturing. Design jig/fixtures for new product, to ensure product manufacturability. Utilizes digital solutions to optimize and maintain state of the art manufacturing processes.
• Supply Chain related: Collaborate with procurement and material engineering in the specification, sourcing and qualification of materials used in the design and production of Agilent products to meet quality, cost and manufacturability goals.
• Other tasks and responsibilities assigned by manager in support of business needs.

Qualifications

• Education: Bachelor's or Master's Degree or University Degree or equivalent in the field of Electrical & Electronic Engineering. Candidates with Mechanical, Mechatronic Engineering, Physics or Computer Science qualifications with strong product engineering experience are also encouraged to apply.
• Certifications: Relevant certifications can enhance your qualifications. Examples include ASQ, QC/QA, EMC, and EMI.
• Knowledge in 6Sigma / Engineering Statistics (PFMEA, SPC, DOE, Process Capability), Value Stream Mapping, Qualification of equipment and Process Validation would be added advantages.
• Skills: Knowledge of probability and statistics, board-level product qualification procedures, manufacturing processes, and familiarity with tools like Microsoft Office and pythons. Knowledge in designing test fixture and tools is added advantage.
• Experience: At least 5+ years relevant experience, especially in manufacturing environment of Mass spectrometry. Vacuum system, electronics and test is desirable. Process characterization and validation using tools such as Cp/Cpk, and Design of Experiments techniques have added advantage. Product test methodology, test software and tester development are advantageous.
• Passionate, innovative, systematic problem-solving and leading on continuous improvement. Self-starter and proven track record of results in setting, implementing complex engineering projects and achieving the goals and demonstrated levels of creativity.
• Must possess strong engineering and analytical skills. Ability to multitask, prioritize and work independently.
• Strong team player with good interpersonal skill and excellent collaboration, oral and written communication skills.

Job Description

Patent Research Engineer works at the forefront of technology and deals with innovations every day. He/she is required to keep abreast with the current technical developments and latest technology trends. This challenging, research-oriented role combines the skills of Scientific Expertise, IP Skills, and Data Science.

Key Responsibilities

• Conduct comprehensive research and analysis of patent and technical information
• Actively involved in analyzing inventions in different technologies and fields of Test & Measurement such as software, electronics & communication, electrical, mechanical, semiconductors, etc.
• Carry out searches on various data bases, with project like prior art, invalidation, infringement, landscape
• Provide timely, critical, and decision-ready research reports to the technical and business community
• Perform data analysis on companies, technologies, and markets to support innovation pathfinding, competitive intelligence, and litigation

Requirements

• Strong technical background with proven technical competencies
• Strong analytical and presentation skills
• Strong interest in information research and a keen reader
• Able to multi-task with excellent attention for details
• Experience with patent searching tools and techniques would be an advantage
• Knowledge of data science would be an advantage
• Work experience in T&M industry would be an advantage
• Bachelors/Masters/PhD degree in Engineering

Provide technical support and assist Manager in project planning and coordination of all site activities.

• Prepare and revise engineering documents, drawings, risk assessments, method statements, safe work procedures, operations and maintenance manuals for all necessary works.

• Coordinate and supervise construction teams and subcontractors for the erection, testing and commissioning of installation of equipment to the required specification and quality.

• Liaise with consultants, owners and relevant authorities on their engineering request.

• Plan and schedule work activities at sites in accordance to master program and ensure work is conducted in a timely and safe manner.

• Ad-hoc duties assigned by the Management from time to time.

We are an M&E Firm located in Woodlands

Job Description

• To report to project manager and to oversee implementation of projects.
• Review and check drawings before installation.
• Raise material request, order material & handle direct manpower management.
• Liaise with Consultants, Main-contractor, Suppliers and Sub-contractors.
• Coordinate with Consultants, Architects and Authorities site inspections.
• To ensure adherence and implementation of O&SH measures at site.
• Manage multiple job sites, supervise and ensure works are following the contract specifications and authorities’ requirements.
• Able to work overtime including weekends and public holidays when required.

Requirements

· Diploma/ Degree or equivalent in Mechanical Engineering.

· Minimum 5 Years and above working experience in ACMV/ M&E engineering is required for this position.

· Good interpersonal skills, self-driven, proactive and able to work independently with minimal supervision.

Working Hours

· 6 Days work week

Senior PECVD Process Engineer

Yishun, Singapore

Who We Are:

Lumileds is a global leader in OEM and aftermarket automotive lighting and accessories, camera flash for mobile devices, MicroLED, and light sources for general illumination, horticulture, and human-centric lighting. Our approximately 5,500 employees operate in over 30 countries and partner with our customers to deliver never before possible solutions for lighting, safety, and well-being.

The Lumileds environment is fast-paced, cutting-edge, intelligent and fun! We are looking for exceptional talent to join our team! To learn more about our company and solution portfolios, please visit https://lumileds.com

What You Will Do:

· Lead engineering experiments to characterize and improve PECVD processes, focusing on quality, yield, and cost efficiency.

· Identify and implement innovations drive continuous improvement.

· Define and establish robust process margins to ensure stable PECVD operations.

· Set up and optimize inline process controls to monitor key parameters and maintain process integrity.

· Conduct risk assessments and develop strategies for potential process deviations.

· Diagnose and resolve process issues implementing corrective actions and preventive measures.

· Optimize PECVD processes to enhance productivity and reduce production costs.

· Develop and update detailed process specifications, SOPs, and work instructions.

· Establish and maintain SPC charts for critical process parameters, analyzing data for trends and improvements.

· Conduct regular process capability analyses to assess and improve process performance (CpK).

· Establish and maintain an OCAP to handle process deviations effectively and train personnel on procedures.

· Lead troubleshooting efforts for defects, yield issues, and process excursions, collaborating with cross-functional teams.

· Drive continuous yield improvement initiatives to enhance production efficiency.

· Mentoring and guiding junior engineers.

· Any other duties assigned by the manager.

What You Will Bring (Required Qualifications):

· Experience in PECVD process engineering, preferably in the semiconductor industry.

· Strong understanding of PECVD technology, equipment, and materials.

· Excellent problem-solving skills and ability to troubleshoot complex issues.

· Strong communication and interpersonal skills for effective collaboration.

· Ability to manage multiple projects and priorities in a fast-paced environment.

· Certification in Six Sigma or Lean Manufacturing is a plus.

Education (Minimum Level)

· Bachelor's

Field of Study

Engineering (Electrical/Electronics, Material Sciences, Mechanical, Chemistry or equivalent).

Years of Experience (Minimum)

· 5 - 7 years

Lumileds is an Equal Employment Opportunity Employer

Staff Process Integration Engineer (Wafer Fab)

Yishun, Singapore

Who We Are:

Lumileds is a global leader in LED and microLED technology, innovation, and solutions for the automotive, display, illumination, mobile, and other markets where light sources are essential. Our approximately 3,500 employees operate in over 15 countries and partner with our customers to deliver never before possible solutions for lighting, safety, and well-being.

The Lumileds environment is fast-paced, cutting-edge, intelligent and fun! We are looking for exceptional talent to join our team! To learn more, visit lumileds.com.

Who You Are:

We are looking for someone for the Staff Process Integration position, with experiences in semiconductor processes and leading projects to timely completion.

Position Summary:

The Staff Process Integration Engineer will be responsible for overseeing and optimizing the integration of various semiconductor manufacturing processes. This role involves the development, implementation, and refinement of process flows and methodologies to ensure high-performance semiconductor fabrication. The ideal candidate will have extensive knowledge of semiconductor processing, integration techniques, and a strong background in troubleshooting and process improvement.

What You Will Do:

· Process Integration Development: Lead the integration of various semiconductor fabrication processes (such as Lithography, Etching, Deposition, Wet processes, etc.) into a cohesive production flow.

· Optimization & Troubleshooting: Analyze and optimize existing processes for improved yield, efficiency, and product quality. Troubleshoot and resolve issues related to process integration to minimize downtime and enhance manufacturing throughput.

· Cross-Functional Collaboration: Work closely with design, equipment, and process engineering teams to define requirements and develop effective process integration strategies. Collaborate with R&D teams to transition new technologies into high-volume production.

· New Process Evaluation & Implementation: Evaluate and implement new materials, tools, and techniques that enhance process integration, improve process capabilities, and support advanced product development.

· Data Analysis & Reporting: Use data analytics to monitor performance, identify trends, and propose improvements. Prepare detailed reports for management regarding process performance, yield analysis, and recommendations for improvements.

· Documentation & Compliance: Ensure all process integration activities are properly documented, including procedures, specifications, and change logs. Ensure that processes are compliant with safety, environmental, and quality standards.

· Training & Development: Mentor junior engineers and technicians, providing training on process integration techniques, troubleshooting, and best practices.

· Process Characterization: Perform detailed characterization of integrated processes to ensure that performance meets the design and reliability requirements for semiconductor products.

What You Will Bring (Required Qualifications):

· Experience in process integration or related fields within the semiconductor industry, with a proven track record in leading process optimization and integration projects.

· Expertise in semiconductor manufacturing processes, including Lithography, Etching, Deposition, Wet processes and other fabrication techniques.

· Experience with semiconductor process tools and equipment, including cleanroom protocols.

· Strong understanding of semiconductor physics, process chemistry, and materials science.

· Familiarity with statistical analysis tools, data analysis software (e.g. JMP, Minitab, Excensio, Datapower).

· Knowledge of process characterization techniques and process control methodologies (e.g., DOE, FMEA, APQP).

· Proficient in troubleshooting complex process integration issues and implementing solutions quickly.

· Strong analytical and problem-solving skills.

· Ability to work collaboratively across various teams and functions.

· Excellent communication skills, both written and verbal.

· Ability to mentor and develop junior engineers.

· Self-driven leader and strong team player with keen technical ability, systematic approach, detail-oriented, excellent problem-solving skills, and positive attitude.

· Ability to work independently, be hands-on and expected to dive into technical details as required.

· Experience with manufacturing operation, failure analysis and LED knowledge will be added advantage.

Education (Minimum Level)

· Bachelor's

Field of Study

· Electrical Engineering, Materials Science, Chemical Engineering, or a related field.

Years of Experience (Minimum)

· 8 years

Lumileds is an Equal Employment Opportunity Employer

- Design and develop IoT connected electronic products and systems based on project specifications and customer requirements.

- Lead project to ensure design meet project specifications.

- Generate software flow chart, IT network architecture and BOM lists.

- PC software development and modularization.

- Integrated line software development in Industry 4.0 environment.

- Conduct factory acceptance test and site acceptance test.

- Conduct internal and end-user software training.

- Update project progress to department head.

- Create internal written knowledge transfer material.

- Create user manual for software application developed.

- Ensure given tasks complete within given timeline.

- Liaise with suppliers on components selection and quotation.

- Liaise with customers on software design and flow.

- Troubleshoot and debug system and software issues.

- Perform system maintenance and support for system in production.

- Train, supervise and assist Software Engineer.

Responsibilities:

• Identifies risk and hazard associated with the electrical works and prepare related risk assessment and work method statement.
• Jobs briefing and tool box talk to workforce prior to start the work activities.
• Ensures timekeeping are followed by subcontractor workers.
• Ensures availability of required engineering drawings, resources and consumables to carry the works.
• Coordinates with other discipline such as QAQC, Material, Painting department according to requirement during the project phase.
• Coordinates closely all EIT work activities between Seatrium (Structural, Piping, Mechanical, Lifting, Architecture, Blast & Paint, HVAC, Maintenance, Commissioning, Weighing, Sea Fastening, Load Out), and Subcontractors.
• Monitoring the subcontractor for daily progress and updates.
• Enforces safe work practices at job site, and monitor, and ensure workers work in a safety manner and all EIT job site are in good and safe condition.
• Participates in Line Walk and prepare punch list prior to complete EIT activity.
• Ensures punch list liquidation and action by subcontractor on required punch point on priority basis.
• Responsible to stop; if any violation by the subcontractors against the HSE or quality requirements.

Requirements:

• Candidate must possess at least a Bachelor’s degree in Marine Engineering/ Electrical, or related disciplines
• At least 10 years of working experience in construction (Electrical & Instrumentation) in marine
• Experience with design-build and construction management at risk delivery methods.
• Excellent proficiency in English (written and spoken)
• Advanced user of Microsoft Office products and project management software programmes (i.e.Microsoft Office Suite, Primavera Project Planner Version 6.0 or higher and etc.)
• Good working knowledge of all phases of construction including work commonly done by the various construction disciplines
• Good knowledge and experience in developing and managing a progress reporting methodology for a complicated design effort
• Ability to understand a demanding, technical and complicated construction program

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Admiralty Yard)

Admiralty Road West, Singapore 759956

(Transport provided from Sembawang MRT)

Mon - Thurs: 8am - 5:15pm

Fri : 8am - 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

We are looking for a Product Packaging Engineer. The candidate is required to liaise with customers on their product and design a packging that is safe for export. The candidate is also required to be responsible for product safety testing such as drop/vibration test with external vendors. Furthermore, the candidate is required to work closely with the production supervisor to ensure all packaging designs are updated.

The candidate is also expected to be responsible for the ISO re-certification. At times, the candidate is also expected to handle heavy equipments. It involves loading/unloading of material so as to be able to check the quality. The candidate needs to ensure that the incoming material matches with the description on the delivery note.

The candidate is expected to be well verse in design software such as autocad, solidworks and others.

Job Description: We are a well-established no-code app development platform, seeking a highly skilled and adaptable Senior AI Integration Specialist to enhance our platform's capabilities through seamless integration of AI technologies. As a key member of our experienced team, you will be responsible for designing and implementing the integration of various AI functionalities to cater to our users' specific needs.

Responsibilities:

• Lead the integration of AI technologies into our no-code app development platform.
• Collaborate closely with the development team to identify integration requirements and implement efficient solutions.
• Customize AI functionalities to align with our platform's objectives and user interaction flows.
• Design and implement robust backend infrastructure to support AI functionalities' seamless performance within our platform.
• Conduct extensive testing to ensure the reliability and accuracy of integrated AI features.
• Continuously monitor and optimize AI performance to enhance the overall user experience.
• Stay updated with the latest advancements in AI technologies and apply relevant innovations to our platform.

Requirements:

• Bachelor's or Master's degree in Computer Science, Engineering, or a related field.
• Proven experience in integrating AI technologies into web-based or mobile platforms.
• Proficiency in programming languages like Python, Java, or JavaScript.
• Familiarity with cloud-based infrastructure and services.
• Strong problem-solving skills and adaptability to meet dynamic project requirements.
• Excellent communication and collaboration skills to work effectively within a team.

Nice-to-Have Skills:

• Experience with integrating language models like ChatGPT or other AI chatbots.
• Knowledge of dialogue systems, natural language generation, and user experience design.

If you are an experienced AI Integration Specialist with a track record of successfully integrating AI technologies into established platforms, we invite you to apply. Join our team and contribute to expanding our no-code app development platform with the power of AI, delivering even more value to our users.

Overview

Manage the installation, maintenance and troubleshooting of chilled water and direct-expansion (DX) type HVAC equipment. Knowledgeable with HVAC market trends and understands what motivates customers to engage our services.

Responsibilities of Role

• Manage and lead team to install chilled water and direct-expansion (DX) type HVAC equipment. Perform testing and commissioning of equipment and system after.
• Able to carry out preventive maintenance of chilled water equipment such as air and water cooled chillers, cooling towers, and fluid pumps. Proficient in troubleshooting breakdowns and carry out repairs where necessary.
• Able to carry out preventive maintenance of direct-expansion (DX) type equipment such as single, multi-split, and VRF DX units as well as air and water cooled package units. Proficient in troubleshooting breakdowns and carry out repairs where necessary.

Skills and Proficiencies Wanted

• Exceptional interpersonal skills with the ability to build genuine relationships with internal team members and customers.
• Fine decision making, possess good problem solving and project management abilities.
• Willing to travel to meet partners.
• Appreciation of Microsoft Office Word, Excel, PowerPoint, AutoCAD.

Preferences

• 5 years working experience in the HVAC industry.
• Possess a valid driver’s license and owns a vehicle.
• Diploma or Bachelor’s degree in Engineering, or National ITE Certificate (Nitec) in relevant disciplines.

Position Overview:

We are looking for a motivated and skilled Mechanical Design Engineer to join our dynamic team. In this role, you will be responsible for designing, analysing and overseeing the structural integrity of mechanical systems and components for our products. These include specialty vehicles, engines and shelters. This role demands a strong understanding of mechanical design, vehicle systems, and relevant automotive and/or military standards, with a focus on ensuring high performance, reliability, and operational effectiveness.

Key Responsibilities:

· Develop and optimize mechanical designs for mechanical and automotive systems, focusing on efficiency, manufacturability, and sustainability.

· Collaborate with multidisciplinary teams, including electrical and software engineers, to create innovative solutions that meet customer needs.

· Utilize advanced CAD tools (such as SolidWorks) to create 3D models and detailed engineering drawings.

· Perform simulations and analysis to validate designs and ensure they meet performance and safety criteria.

· Create prototypes and conduct hands-on testing to gather data, evaluate performance, and refine designs.

· Participate in design reviews and contribute to brainstorming sessions to drive continuous improvement and innovation.

· Maintain thorough documentation of design processes, test results, and compliance with industry regulations.

· Stay updated on industry advancements and incorporate new technologies and methodologies into your work.

· Support manufacturing team with technical guidance to ensure smooth production processes and troubleshoot any design-related issues.

Qualifications:

• Bachelor’s degree in Mechanical Engineering or a related field. Master’s degree or higher qualification is a plus.
• At least 2 years of experience in mechanical design engineering, ideally within the automotive sector.
• Proficiency in 3D CAD software (e.g. SolidWorks) and familiarity with simulation tools (e.g. FEA, CFD).
• Strong knowledge of mechanical design standards, materials, and manufacturing processes.
• Excellent analytical and problem-solving skills with a focus on innovative solutions.
• Effective communication skills, both written and verbal, with the ability to collaborate in a team-oriented environment.
• Results-driven and detail-oriented mindset with a passion for engineering excellence and continuous improvement.

Preferred Skills:

• Strong communication and teamwork skills
• Experience with automotive and/or military vehicle standards and protocols
• Familiarity with vehicle system design and testing procedures.
• Knowledge of mechanical engineering principles as they apply to vehicle systems and structures.
• Experience with project management and leadership in a technical environment.

What we offer:

· Competitive salary and benefits package

· Opportunities for career advancement and professional development

· Collaborative work environment that fosters innovation and communication

· Mentorship and guidance on best practices in automotive and mechanical design

· Opportunity to work on exciting projects at the forefront of automotive technology

Responsibilities:

- Designing, developing and maintaining solar power systems for commercial, residential or industrial settings.

- Ensures that systems are installed properly and running efficiently by regularly monitoring their operation and making necessary repairs or upgrades

- Ensuring the systems compliance with the applicable codes, practices, policies, performance standards, and specifications

- Communicating with clients, interpreting their needs and requirements, and representing them at Site.

Requirements:

- Degree or Diploma in Engineering, Renewable Energy or a related field.

- Experience in solar systems installation & design are preferred.

- Experience in Microsoft Office and Autocad.

- Excellent project management and supervision skills.

Position Summary

This position is involved in Supplier Quality activities that improve, monitor and measure Illumina’s compliance with the Quality System Regulations, Illumina Quality policies, FDA regulations and ISO standards as well as Illumina product quality for current operation and compliance objectives.

Position Responsibilities

· Support qualification of new Suppliers and Partners for materials and services including risk assessments, audits and other supplier on-boarding activities.

· Provide support to investigation teams in determining root causes on material quality issues and initiate/ensure corrective and preventive action plans are developed and executed.

· Interface with Suppliers/CM (Contract Manufacturer), Engineering/ Manufacturing/ Quality Assurance/ Procurement departments to drive for quality improvements, specifically on incoming rejects, workmanship defects and primitive failures.

· Participate in Quality review activities with supplier/CM to identify improvement opportunities to meet quality expectation.

· Constantly review quality processes and suggests improvements that can be implemented to improve performances.

· Support Supplier/CM development and risk management activities

· Compile, evaluate and report on supplier/CM quality performance metrics for scorecard and monitoring

· Monitor to ensure supplier’s preventive and corrective actions are implemented and effective

· Participate with NPI team in selection of new suppliers

· Other such duties that may be determined by Management

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements

· Experience in directly working with Contract Manufacturer/Suppliers

· Experience in conducting supplier audits.

· Developing basic knowledge of quality tools.

· Beginning to intermediate experience with Microsoft tools and spreadsheets, charting, graphing tools and presentation tools.

· May have experience with electronic production life (PLM), enterprise resource planning tools (SAP) and etc.

· May have experience with statistical analysis packages, eg, JMP, Minitab.

· Must be detailed oriented, well organized and able to work independently and in teams.

· Good communication and collaboration skills

· Ability to travel as needed

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Preferred Experience/Education/Skills

· Good understanding of FDA regulatory environment (CFR 820), 501k and ISO 13485 strongly preferred.

· Experience in medical device/ pharmaceutical/ IVD is preferred.

· Typically requires a Bachelor’s Degree in Engineering, Life Sciences, or related field with 0-3 years of experience

Senior DevOps Engineer

We are seeking a highly skilled Senior DevOps Engineer to join our team. In this role, you will design, implement, and maintain scalable, secure, and highly available infrastructure. You will also take a lead role in integrating security best practices into our DevOps pipelines and ensuring the protection of our systems and data.

As a key player in our engineering team, you will collaborate with developers, IT, and security professionals to enhance automation, streamline processes, and safeguard our infrastructure against emerging threats.

Roles & Responsibilities

Duties/Responsibilities:

• Design, implement, and manage CI/CD pipelines for rapid and reliable software delivery.
• Build and maintain scalable, highly available cloud-based and on-premises infrastructure.
• Automate system configuration, monitoring, and maintenance tasks.
• Collaborate with development teams to ensure smooth deployment and integration.
• Monitor system performance, troubleshoot issues, and optimize resource usage.
• Implement and enforce security best practices in cloud infrastructure, containerization, and CI/CD pipelines.
• Conduct vulnerability assessments and remediation for infrastructure and applications.
• Ensure compliance with relevant regulations and standards (e.g., GDPR, SOC2, HIPAA).

Requirement, Skills:

• Strong experience with CI/CD tools.
• Proficiency with cloud platforms specifically Azure.
• Knowledge of infrastructure-as-code (IaC) tools.
• Expertise in containerization and orchestration tools.
• Deep understanding of security principles, including secure coding, encryption, and network security.
• Experience with vulnerability scanning tools.
• Proficiency in at least one programming/scripting language.
• Good to have experience with monitoring tools.

Interested candidates are invited to apply online with full resume, stating current/expected salaries and contact numbers. Candidates are also requested to send in a sample of their web projects that will showcase their experience for the position.

Location: Singapore

Only shortlisted candidates will be notified

• Attend site walk and prepare quotation
• Budget calculation and inquiry quotation from sub-contractor and supplier like material
• Tender documents preparation
• Biding proposal preparation and present
• Client relationship maintenance and marketing analysis
• And other ad-hoc duties as assigned

Job Requirement

• 3 years of experience as Sales Engineer or similar technical Sales role
• Preferably knowledge in semiconductor industry
• Pay attention to detail and a high degree of confidentiality
• Proficiency in Microsoft Office, especially Excel
• Good written and verbal communication skills
• Bilingual (English & Mandarin), able to read & write due to the document from HQ (Taiwan) is in Mandarin
• Candidate will be based at office (Ark@Gambas)

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND products.
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing CVD/PVD teams on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise R&D Films peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise R&D to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough solutions.

Requirements

• Master degree or higher in Materials Science, Chemical/Microelectronic Engineering, or Physics with minimum 2 years hands-on experience in leading edge film deposition/CVD deposition/implant technology work.
• A deep understanding of chemical kinetics, thermodynamics, physical phenomena and their direct application to CVD/PVD deposition in various deposition methods.
• An ability to understand and troubleshoot precursor depletion effects within three dimensional structures and come up with innovative ideas to mitigate the effects.
• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM.
• Understanding of various integration and structural impacts and constraints related to film deposition processes.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise R&D for 4-6 months at a stretch to work on technology development.

Responsibilities:

- Liaise with customers on all matters and work with internal departments to ensure that customers requests are met

Requirements:

- Min ‘A’ level / Diploma in manufacturing / engineering or related fields or equivalent

- Min 3 years experience in sales or quality in manufacturing industries

- Able to work with interdepartment members to support customer requests or requirements

- Able to handle multiple priorities, operate with minimum supervision and adaptable to changes in priorities and approaches in fast-paced environment and work overtime

Responsibilities:

• Implement project planning, design, material requisition, cost control and documentation
• Coordinate and supervise project work on various site
• Review Schematic, as-built drawing
• Follow up on drawing discrepancies
• Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

• ITE/Poly/Diploma/Degree in Electrical or in any engineering field
• Prior experience in Construction / Engineering work would be an added advantage
• Office proficient in (AutoCAD/Microsoft Office)
• Independent, resourceful, pro-active and a team player
• Possess good organization, planning and project management skills
• Able to work under tight deadlines

Job Requirements:

· Bachelor’s Degree or Diploma in Engineering (Mechanical/Electrical) or related field required

· Preferably 4+ years’ related field and project planning experience

· Excellent project management skills desired

· Must have driving license

· Good written and verbal communication skills is a plus

· Field management experience a plus

· Entry level are welcome to apply

· Preferably have experience in water and wastewater industry & piping installations

· Passion for looking for ways to improve individual and/or company performance

· Responsible and Independent

Job Responsibilities:

· Assists in preparation and implementation of Project Execution Plan.

· Attends the Weekly Progress Meetings (Internal as well as with Client) and assist in preparation of Minutes of Meetings.

· Monitors work in progress and prepares weekly report of the status of each assignment.

· Ensuring all procedures and calculations are submitted to the client for review and approval.

· Coordinates materials and assists in the logistics, its shipment and receipt at construction site.

· Coordinates with all project related personnel on day-today progress of work activities, procurement and operations to ensure timely completion of the project.

· Provide full support as required by the Management and Project Team for all projects.

· Overall coordination and management on manpower schedules.

As the Facilities SmartFac & Control Engineer, you are required to lead engineering and maintenance works in the fields of SMART Fac and Control systems on site, with the necessary guidance and direction from Facilities organization, to achieve facilities department, site, facilities corporate and company goals.

Job Responsibilities:

• Lead on site Smart System transformation and on implementation of Smart fac projects with AI-enabled detection and analytics in collaboration with other Micron Departments.
• Lead on Sustainability and Environmental Control system deployment with early detection and predictions, utilizing Industry 4.0 system.
• Lead on labor productivity automation projects with innovative idea to improve facilities team efficiency.
• Plan, design and lead Control Automation engineering projects includes new construction, system upgrading and quality improvement.
• Lead troubleshooting and attend to abnormalities in support of Operations in a timely manner on system under Smart FAC & Control section when required.
• Lead on the planning and supervise Preventive and Corrective Maintenance work activities, priorities and reallocate resource when required.
• Perform capacity tracking and planning for Instrumentation and Control systems.
• Acquire estimated cost and raise purchase requisition for service or parts necessary for repair and maintenance purpose, when required.
• Utilize computer base software to document and analyze records of work order and equipment history.

Job Requirements:

• Bachelor Degree in Electrical/Electronics/Computer engineering or equivalent related field.
• Experience in programming of programmable logic controller (PLC) and process automation PID control.
• Experience and Good knowledge of various handheld tool, portable and panel measuring device and equipment.
• Experience in SCADA, HMI and reporting software.
• Proficient in Microsoft office.
• Ability to use and create schematic, single-line drawing and related equipment and system documentation
• Good knowledge on Python, Java, C/C++, C#, SQL, machine learning software.
• Ability to work in a team environment with various professional level.

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Job Overview:

The Assistant Project Engineer will report directly to the Project Manager and manage ACMV (Air-Conditioning and Mechanical Ventilation) works within the built environment. The role involves ensuring that all project activities comply with engineering and contractual requirements. This position requires collaboration with the design department to meet engineering and safety standards, while overseeing contracts, costs, schedules, and overall project completion.

Key Responsibilities:

• Assist in managing the overall project from concept to completion, including support in planning, scheduling, budgeting, and coordinating with stakeholders, while following the Project Quality Plan, Safety Management Plan, and Building Execution Plan.
• Support the development and maintenance of the BIM model, ensuring it is accurate and up-to-date.
• Assist in the preparation and management of project documentation, including drawings, specifications, and reports.
• Collaborate with the client to help meet their requirements under the guidance of the Project Engineer
• Assist in verifying changes to project scope, schedule, or budget, ensuring compliance.
• Help in resolving technical or contractual issues that arise during the project, with the support of the senior team.
• Provide assistance in managing the construction process to ensure it progresses on time, within budget, and meets quality standards.
• Support monitoring the performance of contractors, ensuring they meet their obligations.
• Coordinate with various consultants and contractors, under the guidance of the Project Engineer.
• Assist in the handover process of the project to the client.
• Comply with all relevant Singapore regulations and standards under the supervision of senior project staff.
• Promote safety management activities and assist in compliance inspections.
• Assist in obtaining necessary permits and approvals.
• Support sustainability efforts and ensure the project adheres to environmental standards.
• Help minimize disruption to the public during construction by coordinating with authorities.

Requirements:

• Diploma or Degree in Mechanical Engineering, Building Services, Project Management, or a related field. ACMV project experience is preferred.
• Bizsafe Level 2 safety certification or higher preferred.
• A minimum of 1 year of experience in a related field is preferred, though fresh graduates are welcome to apply.
• Strong independence and leadership skills in a team environment.
• Knowledge of BIM are advantageous.

Advantages & Benefits:

• 5-day work week.
• Training provided for skillset conversion to BIM management, with fast progression upon BIM accreditation.
• Career development focused on progression and growth.
• AWS included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

Requires a BS in Electrical or Computer Engineering and > 5 years of related experience

Description

As NTI Yield Analysis Engineer in NTI Singapore department at Micron Technology Inc., you will be responsible for developing innovative NAND product technologies, define, and execute various effective actions to enable solutions to improve yield, quality, reliability, and hit key milestones & achieve the required performance within committed timelines.

Your responsibilities will include, but are not limited to, the following:

• Discover yield issues in NAND development and identify unique metric or combination of metrics, such as wafer/dice/tile shading, ECATS or other custom metric for issues quantification.
• Interact with process area, process integration, yield, failure analysis, product engineering, design, and layout teams to drive clear definition of yield, cell, CMOS, qual, and reliability issues and pareto and derive improvement actions needed across tech-nodes and designs.
• Own and drive non-standard deep dive statistical analysis of inline, probe, cell, and other critical metrics to define issues/problems, enable early inline detection, and improve the product yield and quality. Quantify and track progress on the issue hit hate, line impact, gap to program goal. Quantify yield improvement/downside seen based on process/probe changes.
• Initiate data mining and correlation study on new issue seen. Initiate PFA request to identify root cause of yield issue. Perform inline correlation study to establish inline prediction to yield issue. Make yield projections based on expected improvement/downside. Conduct yield trend analysis, identify root causes in process step, conversion, algorithm change, and design, for yield shift.
• Continuously develop/re-define inline detection in collaboration with metrology and RDA team.
• Identify and define gaps with current test and co-develop (with product, probe, param engineering) unique parametric/probe bins to detect new fail modes as well as validate new program release.
• Collaborate with module owners to identify, quantify key module deficiencies/technology gaps, and drive cross-functional teams to address. Optimize existing layout, conceptualize, and develop innovative solutions to meet product requirements and manufacturability.
• Develop and innovate techniques in extracting data from different databases through various query languages and automate through scripting to improve work efficiency.
• Assist and support the transfer documentation of layout/architecture fundamentals of new technology from R&D to manufacturing fab.

Successful candidates for this position will have:

• Masters/PhD graduates in Materials engineering.
• Minimum of 4 years of experience in the semiconductor industry in the areas of Yield Enhancement, Data Science, Unit Process or Quality Reliability Analysis.
• Ability to develop a strong holistic end to end understanding of PI module on new NAND technologies, and related structural & electrical fail mechanisms.
• In-depth knowledge and direct experience with nonvolatile memories along with good understanding of the process flow, interaction of process & device, common yield & reliability issues and K2 view layout are desirable.
• Curiosity and natural tendency of learning new things independently.
• Exposure to R&D and transfer/manufacturing is desirable.
• Deep understanding of layout and architecture of NAND product.
• Deep understanding of probe failure mechanism, ability to do electrical bench data collection is desirable.
• Ability to be self-motivated and self-governing with proven ability to work in a demanding and dynamic environment.
• Ability to drive and coordinate cross-functional teams to achieve various goals.
• Solid analysis, communication and reporting abilities with demonstrated presentation abilities.
• Ability to travel for extended periods of time to the US or other fabs for collaborative R&D work.

Senior Process Engineer (Wet/Plating)

Yishun, Singapore

Who We Are:

Lumileds is a global leader in LED and microLED technology, innovation, and solutions for the automotive, display, illumination, mobile, and other markets where light sources are essential. Our approximately 3,500 employees operate in over 15 countries and partner with our customers to deliver never before possible solutions for lighting, safety, and well-being.

The Lumileds environment is fast-paced, cutting-edge, intelligent and fun! We are looking for exceptional talent to join our team! To learn more, visit lumileds.com.

Who You Are:

We are looking for someone for the Senior Process Engineer position, with experiences in WET etch/cleaning/Plating process knowledge. Additional knowledge in the lithography process will be an advantage.

Position Summary:

Lumileds is seeking a highly qualified Senior Process Engineer to take responsibility for Operations Engineering under Lithography and WET Engineering Module.

In this role, you will handle daily process related operations, and work with equipment engineers and shift team to sustain and improve the module KPIs.

What You Will Do:

· Process Owner for WET/Plating processes on different layers/substrate.

· Take ownership and drive development in WET/Plating Process technology roadmap.

· Drive cost efficiency through innovative process simplification, improving productivity and optimizing current costs model.

· Drive improvement to optimize processes to meet the yield and quality requirements.

· Map-out / Design DOE to understand the interaction between process and hardware parameters and apply the results and knowledge to optimize for best performance

· Process improvement through conceptualize the ideas, characterize and optimize processes / applications needed for successful integration.

· Investigate, analyse root cause to problems with DMAIC systematic approach.

· Work with inter/intra departments on all continuous improvement activities.

· Actively lead, participate and manage project workgroups. Coordinate project activities for successful implementation.

· Prepare specifications, workflow, quality and safety related documentation; Monitor and optimize current procedures and propose necessary changes or improvements through proper documentation, SOP and OCAP.

· Process sustaining and control through SPC and periodic defect Pareto Analysis.

· Maintain Safety & housekeeping at all time for a safe work environment that is compliance to the safety regulations.

· Any other duties assigned by the Engineering Manager.

What You Will Bring (Required Qualifications):

· Min 5 years working experience in WET etch/Cleaning process engineering. Experience in the 6 inch technology and hands on/manual fab will be an advantage (WET bench, SSEC, NEX Plating, Semsysco, scrubber).

· Basic knowledge in the wafer fab fabrication is a must.

· Proven track record of problem solving and process improvement in a semiconductor manufacturing.

· Possess a high degree of self-motivation, goal orientated and the ability to focus on solving problems and to learn new skills.

· Experience with manufacturing operation, failure analysis and LED knowledge will be added advantage.

· Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.

· Good interpersonal and analytical skills.

· Ability to work independently, be hands-on and expected to dive into technical details as required.

Education (Minimum Level)

· Bachelor's

Field of Study

Chemicals, Materials Science, or relevant engineering degree is required.

Years of Experience (Minimum)

· 5 - 7 years

Preferred Qualifications:

· Additional experience and knowledge in the Lithography will be an advantage.

Lumileds is an Equal Employment Opportunity Employer