♦ Close supervision, Management and execution of construction works at site, including monitoring work progress and quality

♦ Manage, vendors, contractors and Sub Con for progression of work

♦ Responsible for all the site implementation and completion towards management target, client’s expectation and compliance to authorities' regulations.

♦ Responsible for the project quality and safety plan.

♦ Liaise with consultant and contractor for Green Mark certification processes

♦ Ensure company ISO and OHSAS requirements are fully implemented on project.

♦ Coordinating with authorities, clients, consultants and subcontractors on all project aspects.

♦ Work closely with Engineering team on any technical issues arising from site and lead the supervision and resolution of work onsite

♦ Ensure proper documentation and records of site works are carried out

1，Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Environmental/Health/Safety) or equivalent.

2. At least 3 year relevant experience construction.

3，Required skill(s): MS Office, AutoCad.

4，Preferably Senior Executives specializing in Engineering - Civil/Construction/Structural or equivalent.,

5，Independent, proactive positive work attitude

*We regret that only shortlisted candidates will be notified.

Roles & Responsibilities

• Attend to Client’s site surveys, meetings and maintain constant contact/communication regarding project works (In progress and new)
• Work closely with the drafting department to come out with preliminary design (for client’s approval), material take off and cost estimation for the new potential projects
• Carry out cost estimation and prepare quotation for clients
• Procurement of materials and consumables required to carry out the fabrication work
• Work closely with clients during project execution with regards to schedule, determination of hold points (for testing and inspection) and project close up
• Overall in charge of project’s delivery schedule, cost control, quality and safety (i.e. ensure that projects are carried out within budget, schedule and with zero rework and safety incident)
• Carry out daily meeting with the supervisors to plan, prioritize, review and update status of projects
• Prepare Risk Assessment for Clients review and approval prior to work start
• Update project status during the project weekly meeting
• Check and ensure proper documentation (such as test packages, as-built drawings etc) are in place prior to project close up
• Ensure D.Os, Job Completion forms and invoices are in place (signed, submitted and filed promptly) within 1 week of project close up
• Maintain accountability to the individual client site based on sales records, quality control and safety records
• Ensure overall safety well being of workers in the workshop as well as the on site during project execution
• Carry out at least one Monthly safety Audit using the Audit Checklist
• Attend and participate all Safety Meetings organized by Clients

Education & Work experience Requirements:

1. At least Bachelor's degree in Automation, Control Engineering, Internet of Things (IoT), or related fields.

2. At least 3 years of relevant work experience in the structural steel industry.

Job Description:

1. Develop and optimize automation solutions based on production requirements, and coordinate with teams to deploy automated inventory management systems.

2. Design and improve automated steel structure production processes, integrating industry-standard software (e.g., Tekla) with processing equipment to achieve automated cutting, assembly, and welding.

3. Maintain existing production lines and propose improvements to minimize manual intervention and increase efficiency.

4. Collaborate with teams to ensure seamless integration of automated systems with existing production management systems, and provide training and guidance on new equipment and systems.

5. Generating reports outlining new automation ideas, machine and software upkeep best practices, test results.

Key Skill & Competency Requirements:

1. Proficiency in sensor principles and applications, with the ability to design and optimize sensor-based monitoring and control systems.

2. Proficiency in embedded systems design, including embedded hardware development, microcontroller programming (e.g., ARM, STM32), and real-time operating systems (RTOS).

3. Familiar with C# programming.

4. Familiar with mainstream automation development tools and software, such as LabVIEW, MATLAB/Simulink, Siemens TIA Portal, and AVEVA System Platform.

5. Familiar with industrial automation technologies, including PLC programming, servo control, and industrial robotics.

6. Familiar with smart manufacturing technologies (e.g., Industry 4.0, MES systems, IoT devices) and their applications in steel structure manufacturing.

The Role

Digify is seeking a talented and motivated Full Stack Developer to join our team. You will play a vital role in developing and maintaining end-to-end solutions that drive the success of our products and services. The ideal candidate is passionate about coding, eager to learn, and ready to contribute to the development of innovative document security solutions. You will work closely with cross-functional teams to design, develop, and maintain applications that meet business requirements and delight users.

WHAT YOU WILL BE DOING 

• Front-End Development:
• Develop responsive web interfaces using modern frameworks such as React and  Angular.
• Ensure seamless user experiences by integrating front-end designs with back-end systems.
• Back-End Development:
• Build and maintain APIs, micro services, and integrations
• Design and manage databases, such as DynamoDB and PostgreSQL, to ensure efficient data storage and retrieval.
• Collaboration & Problem Solving:
• Work closely with UI/UX designers, product managers, and other developers to implement new features.
• Debug and optimise code for performance, scalability, and reliability.
• Testing & Deployment:
• Write and maintain unit, integration, and end-to-end tests.
• Assist with deployment and maintenance of applications in cloud environments such as AWS

WHAT YOU NEED TO  HAVE

• Bachelor’s degree in Computer Science, Software Engineering, or a related field, with 3 to 5 years of professional experience as a Full Stack Developer.
• Basic understanding of cloud platforms, such as AWS and GoogleCloud, and serverless architecture
• Proficiency in front-end technologies: HTML5, CSS3, SASS and one modern framework (e.g., React, Angular).
• Proficiency in back-end development using languages like NodeJS, .Net, Python
• Familiarity with database management systems such as DynamoDB, MySQL and PostgreSQL
• Good understanding of Design Patterns and Data Integration Patterns
• Good understanding of application performance, scalability, security engineering
• Knowledge of version control systems, particularly Git.
• Strong problem-solving and troubleshooting skills
• Experience with providing third level support of production environments
• Strong sense of ownership
• Good communication skills and the ability to work collaboratively in a team environment.

• Utilize and integrate with tools like Jira & Confluence, Bitbucket and any kinds of code analysis tools like Codacy.

• Research, design, and develop new circuits, technology, modules, and devices
• Strategise on architectural and electronic designs, product pipelines, and new potential technology and devices
• Identify, analyse, recommend, and develop next-generation improvements for existing circuits, technology, modules, and devices
• Conduct evaluations and recommend modifications on existing designs and prototypes based on performance in quality test and customer feedback
• Ensure reliable and consistent performance and function of existing designs for circuits, technology, modules, and devices in operating environments
• Perform circuit analysis, run simulations, create schematic drawing and PCB layouts, and produce wiring programs using respective softwares
• Design, develop, and execute testing and investigation methods / procedures for circuits, technology, modules, and devices with the use of Automated Test Equipment (ATE)
• Prepare engineering sketches and specifications, design and test documentation, product specification or Bill of Materials (BOM), and product development timeline
• Coordinate with relevant teams to ensure design manufacturability and testability
• Keep updated on technology and regulation development

Requirements:

• Good understanding of electrical engineering codes, electronic systems, component materials and safety standards
• Possess hands-on experience using design and calculation software
• Strong analytical, problem solving and conceptualisation ability
• Strong interest in technology
• Ability to think outside the box and manage complexity
• Strong team player and customer-oriented with strong interpersonal and communications skills
• Proactive, enthusiastic with “can do” attitude
• Meticulous, self-reliant and strong sense of urgency
• Committed, motivated and able to handle multiple tasks simultaneously

Purpose: To lead in the management of supplier’s quality performance and technical specification compliance to better meet the company’s business goal and requirements (Quality, Logistics, Technology, Cost, Service).

Key Area of Responsibilities:

• Review and approve First Article (FA) Report for product qualification
• Review and approve Supplier Change requests through the Supplier Change Request and Waiver Report submitted by the supplier to manage Change Control (Copy Exact requirement).
• Conduct part buy-off at the supplier site per customer/VDL requirements to ensure compliance before the part is delivered to VDL site.
• Review the Material Review Board (MRB) list to make a disposition on non-conforming parts and take follow-up action (for supplier-related issues).
• Review, approve, and validate actions in the Supplier Non-Conformance Report (NCR)/Corrective Action and Preventive Action (CAPA) Report to ensure the root cause is identified to actions done to eliminate the issue and prevent re-occurrence.
• Review, approve and validate actions in the Supplier 8D Report to identify the root cause and eliminate the issue to prevent re-occurrence.
• Conduct Quality Management System /Technical / Process Audit to qualify; periodic assessment to mitigate risk to Customer and VDL.
• Provide support on the Supplier Quarterly Business Review (QBR) process (Quality-related actions, indices, and feedback) to ensure alignment between critical suppliers and VDL to meet VDL requirements/targets.
• Engage in Continuous Improvement Projects (CIP) with suppliers to improve Quality and prevent Quality issues.
• Review overall supplier Quality status during Weekly Supplier Quality Department meetings to control supplier Quality and mitigate concerns.
• Present updates on Supplier performance to management and the customer focus team at the Customer Performance Forum.
• Provide support on New Product Introduction (NPI) meetings (Supplier Quality-related) to understand customer requirements and translate them to related suppliers.
• Support and participate in the company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Mechatronics or other relevant qualification.
• Minimum 3 years of experience as a supplier quality engineer in the manufacturing industry.
• Certified Quality Engineer preferred
• Team player
• Good problem-solving skills
• Meticulous in details
• Proficient in advanced Microsoft Excel functions
• Good communication skills

Job Scope:

• Submit plan and execute well-defined sales strategies to achieve targets;
• Develop and maintain good rapport with existing customers;
• Promptly and professionally attend to customers’ enquiries and requests and provide technical advise on both existing and new products or systems;
• Supports sales opportunities through presentations, calling and visiting customers and prospects, needs identification with active follow-ups;
• Ensuring smooth service operation efficiency for customers with sales and operations team
• Investigating and resolving customers’ issues with relevant departments when necessary
• Acquire new customer accounts;
• Assist in preparation of proposals and quotation administration;
• Contribute creative alternative ideas to help maximize sales opportunities;
• Participate in marketing, advertising, promotional and publicity activities in line with corporate and product strategies;
• Gather information on market demand, competition and latest product developments
• Conduct periodic sales forecasts;
• Prepare weekly sales/contact reports.

Requirements:

• Diploma/Degree in Mechanical/Marine Engineering;
• Experience in Sales preferred but fresh graduates are welcome to apply;
• Possess Class 3 driving license (with own transport preferred)
• Excellent communication, interpersonal and presentation skills;
• Possess an outgoing personality;
• Resourceful, proactive self-starter, positive attitude, performance oriented, able to work independently but also a team player;
• Must be able to read and write fluently in English

Job Description:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• At least a Bachelor in Chemical Engineering
• Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Others:

• Working hours : Mon to Fri (8am to 5pm)
• Company Transport / Transport Allowance if candidate travel to work by him/herself (S$120)

Job Descriptions:

• To ensure all the maintenance works carried out systematically, efficiently & safely.
• By improving existing preventive maintenance system thus reduce maintenance cost and improve performance of equipment.
• To be the initiator and coordinator of MOC for any addition, modification and replacement in the system.
• To assist the Section Manager and Supervisor to co-ordinate and supervise the day to day activities.
• To troubleshoot Mechanical Equipment / Systems’ problems when it runs abnormally malfunction.
• To work closely with the operation team for daily, weekly and monthly maintenance programmed to maintain all equipment running efficiently, safely and smoothly.
• To train all technician and staffs on equipment maintenance and monitor the 5S and TPM activities carried out in the section.
• To assist the Section Manager to propose and implement action plans to rectify faults occurring in the system/processes.
• To be involved in new project management time to time and be responsible for document preparation and other paper works, as well as co-ordination with contractors & Vendors.
• To manage all Mechanical & electrical Instruments spare parts and tools.

Job Requirements:

• Bachelor Degree in Mechanical Engineering
• Self-motivated, able to work independently and with a team to completion of tasks

Remuneration:

• Working hours - Monday to Friday: 8am to 5pm ,Alternate Saturday: 8am to 5pm
• Company Transport / Transport Allowance $120 if possess own transport
• AWS
• Performance Bonus
• Medical Benefits
• Sign-on Bonus

Min Qualifications / Experience :

Bachelor Degree in Mechanical Engineering with minimum 3 years relevant experience

Job Skills Required :

Mechanical design of pressure vessels, heat exchagers & atmospheric storage tanks. Thermal design of heat exchangers is also a required skill.

Familiar with international design codes such as ASME, British, Australian & European Codes, Tema, API650 & etc.

Proficient in design software such as PVELite, NozzlePro, StaadPro & Autocad.

Duties & Responsibilities

The duties and responsibilities are:

a) Responsible for the formulation of schedules and datelines for design and date of submission.

b) Check detailed design and drawings based on relevant codes and client specifications, while ensuring the most cost efficient methods of design are used.

c) Liaise and co-ordinate with Project Department to obtain relevant information for detailed design.

d) Determine the conditions and study all pertaining data thoroughly and accurately for a design. Many different combinations of loadings are possible and the most probable combination of simultaneous load for an economical and safe design is selected.

e) Control and issue all technical documents.

f) Any adhoc project assigned by Design Manager.

Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping, tank and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. Perform QA/QC welding inspections at site.
7. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
8. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have bachelor or master’s degree in mechanical engineering or equivalent.
2. Must have more than 10 years’ work experience.
3. Must have valid API 510, API 570 and API 653 Certificate.
4. Must have Senior Welding inspector certificate under AWS-SCWI or CSWIP 3.2.2.
5. Must have NDT level II certificates in MPI, PT, UT and RT.
6. Must have previous shutdown inspection experience in Shell Seraya and Neste Singapore.
7. Knowledge in code book like AWS, ASME, API codes.
8. Must have a good knowledge about MT, PT, UT, RT Methods.
9. Must having an inspection experience in Exchanger, pressure vessels, tanks and columns.

1. Promote and practice 5 "S" and the QEHS system procedures.

2. Take corrective steps on non-conformities which are reported and to solve the problems which impact the quality and delivery of service and products.

3. To counsel subordinates who violate company rules and regulations.

4. Lead team of men for site works as required.

5. On time delivery.

6. Promote & drive continual improvement programs.

7. Mentor new fitters and give guidance to update others on technological changes in our portfolio

To be successful in this role, we expect you to have:

• Supervisory Capacity with Minimum 5 years of Experience in Anchorage Engine works

• Knowledge & Experience of job cards

• Hands-On knowledge and experience in assembly/disassembly of engines

• To oversee packing standards to ensure compliance

• To conduct tool-box meeting with subordinates to disseminate information and instructions

• A diploma in marine engineering with shipyard experience

• Fruitful and Meaningful relationship with our customers

• A good attitude with willingness to learn

Job Description & Requirements

Duties & Responsibilities:

1.Preparation of construction schedule and monitoring of work progress.

2. Coordinate and supervise the civil work progress.

3. Resolve the problem arises on site to ensure timely completion of works

4. Conduct meeting with sub-contractors to update progress of work.

5. Ensure works are carried out in accordance. Update daily activities and manpower allocation.

6. Liaising with local authorities, client’s representatives and sub con and consultants.

7. Review project specifications, tender classification and construction drawings.

8. Involve in technical discussion and progress meeting

9. Assist project manager in daily works.

Qualifications

• Bachelor’s degree in Mechanical / Sewer Engineering approved by PE board.
• Min 4 years' Experience
• Experience in water pipe and best knowledge in laying water pipe
• Strong verbal, written, and organizational skills.

Other Details

Salary Range S$3,500 to S$7,000

performance bonus & variable bonus

Reporting to Project Head, you will be responsible for managing the full project execution in terms of scope, cost, schedule and quality. With strong project planning, cost control and time management skills, you will be overseeing a team of sub-contractors and working with various internal and external parties.

Job Description:

• Manage the full spectrum of project execution in terms of project scope, cost, schedule and quality from initial preparation stage until complete handover.
• Planning, cost control, work measurement and collection of performance data such as installed quantities, spent labour and other progress measurement data.
• Manages and tracks all changes, potential changes, ensuring estimated cost and schedule changes are given visibility to relevant parties.
• Provide regular reports inclusive of cost and schedule data to the top management.
• Works independently on complex project risk assessment issues, manage conflict, and provide resolution using a combination of technical skills, leadership, teamwork and people management skills.

Job Requirements:

• Minimum diploma holder in Engineering, Project Management, and other relevant majors.
• Experience to handle large and complex project in automation, logistics equipment and system, etc.
• Minimum 3 years of experience in Project Controls management relating to cost, scheduling and estimating at a project level.
• Knowledge of contracts and contract administration including its assessment and implementation at each phase of the project.
• Demonstrated ability to work with project teams to influence and achieve desired results.
• Proficiency in MS Office (spreadsheets, word processing, presentations, graphics) and Project Controls software.
• MUST be willing to travel for overseas project (Travel frequency 50%- 70%)

Responsibilities:

1. To supervise and manage the functions of Repacking/Containment/ICW operations and Maintenance.
2. To monitor the safe process flow and backlog level of TIW waste.
3. Ensure all staff are well trained according to OJT programme and following the safe work procedures and SOPs.
4. To ensure the effectiveness and smoothness of coordination with operation and sales team and customer service maintaining high quality of services.
5. To monitor the outgoing containment purchase budget and encourage the recycling of used containment to save cost.
6. Daily and regular inspection of the operation processes and monitor the plant 5S and TPM activities, safety and discipline at works, machineries and equipment conditions.
7. Work with Lab chemists to evaluate and develop new treatment methods and handing procedures for new and unknown wastes, and review of operation costs and regular update to management.

Requirements:

• Degree in Chemical Engineering or Chemistry
• At least 2 year relevant experience

Remuneration:

• Basic salary: $3,400 – $3,800
• Company Transport / Transport Allowance $120 if candidate possess own transport
• Working Hours: Monday to Friday: 8am to 5pm
• AWS & VB
• Sign-on bonus

· Customizes CMS database check sheets and allocation of check sheets based on latest engineering drawing revisions and punch list updates for mechanical/ electrical process/safety /HVAC discipline

· Prepares boundary drawings as per subsystem listing

· Prepares procedures/ work method statements and risk assessment for mechanical/electrical process/ safety/ HVAC commissioning activities

· Attends Factory Acceptance Test at vendors' premises, as required. (FAT)

· Leads a team of mechanical electrical technicians/ mechanics for preparation and site execution of pre-commissioning, commissioning and function testing of mechanical equipment and vendor equipment packages on the topsides

· Reviews commissioning shipped-loose items, consumables and spares for proper inventory and availability

· Reviews system / sub-system completion status for taking over from Construction Team as per commissioning schedule and priorities

· Liaises with various parties including vendor site representatives, where required, to ensure any issues affecting system completion are resolved in a timely manner

· Participates in system / sub-system joint inspections for taking over from Construction Team, punch listing activities,

· Able to travel oversea

· Prepares relevant documents required for safe energization of equipment such as Livening -Up Notice, CPTW, Isolation Lists, etc

· Ensures that commissioning testing activities are conducted safely and complies with the site PTW and safety regulations and procedures

· Reviews completed commissioning documentation such as check sheets, test procedures, red-line mark-up drawings, commissioning dossiers, etc.

· Follows up with relevant parties to ensure proper closure of outstanding issues arising from commissioning activities

· Ensure to maintain up to date punch close report

Requirements:

· Min. 3 years year of commissioning experience in the Oil & Gas/ marine industry.

· Experience in commissioning of Diesel Generators/ Compressors/ Pumps/ Piping systems / Utility packages/ cranes / mechanical handling equipment/ HVAC, etc

· Good knowledge and experience in commissioning activities of oil and gas/ marine facilities

· Familiar with permit-to-work systems and lock-out tag-out procedures

· Good analytical, problem solving and planning skills.

· Familiar with Project Specifications, Technical and HSE Standards

· Familiar with MS Office software applications (MS Outlook, Word, Excel, Power Point etc.

· Familiar with Completion Management System database such as PIMS-CMS / WinPCS / ProCoSys / ICAPS---(Optional or added advantages)

Working hours：

Monday –Friday: 8:30am – 6:00pm (Transport provided from Jurong East MRT to Office)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Purpose: Responsible for supervising staff, ensuring health and safety regulations at work are followed, making sure adequate training has been provided to the workers in the usage of equipment, and identifying deficiencies to be improved in production.

Key Area of Responsibilities:

• Supervising the man and assembly process, ensuring quality work is done safely and efficiently.
• Organize and motivate the mini-companies to perform daily production activities.
• Draw up training, and job rotation plans to develop manpower to be more flexible and competent and stimulate continuous productivity improvement.
• Liaising with other Engineers to develop plans that improve productivity, in terms of costs and manpower required.
• Support engineering/manufacturing teams, draw up safety protocols, report issues to the manager, and develop strategies to improve efficiency and profit.
• Take part in quality meetings with QA and process, conduct production CAB meetings, and ensure corrective actions are carried out.
• Conduct daily supervisor and production meetings to achieve delivery reliability.
• Record and report on the department’s activities and production results regularly in each productivity review meeting.
• Manage consumables and non-capitalized equipment spending.
• Maintain and ensure 5S housekeeping on the shop floor.

Qualification & Experiences:

• Diploma/bachelor’s in engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering).
• At least 3 years of experience as an engineer in the manufacturing assembly environment.
• Good communication skills to perform mentoring and coaching to production staff.
• Good knowledge in problem-solving methodology.
• Ensure the safety standards and process safety management is duly followed.

Duties & Responsibilities:

1.Preparation of construction schedule and monitoring of work progress.

2. Coordinate and supervise the civil work progress.

3. Resolve the problem arises on site to ensure timely completion of works

4. Conduct meeting with sub-contractors to update progress of work.

5. Ensure works are carried out in accordance. Update daily activities and manpower allocation.

6. Liaising with local authorities, client’s representatives and sub con and consultants.

7. Review project specifications, tender classification and construction drawings.

8. Involve in technical discussion and progress meeting

9. Assist project manager in daily works.

Qualifications

• Bachelor’s degree in Mechanical / Sewer Engineering approved by PE board.
• Min 4 years' Experience
• Experience in water pipe and best knowledge in laying water pipe
• Strong verbal, written, and organizational skills.

Other Details

Salary Range S$3,500 to S$7,000

performance bonus & variable bonus

Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. To carry out RBI inspections as per the codes and standards.
7. Perform QA/QC welding inspections at site.
8. Carry out coating inspections of equipment’s and piping.
9. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
10. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have bachelor or masters degree in mechanical engineering or equivalent.
2. Must have more than 10 years’ work experience.
3. Must have valid API 510, API 570, API 571 and API 580 Certificate.
4. Must have Senior Welding inspector certificate under AWS-SCWI or CSWIP 3.2.2.
5. Must have NACE level 3 or FROSIO level 3 certificate.
6. Must have NDT level II certificates in MPI, PT, UT and RT.
7. Must have previous shutdown inspection experience in Shell Seraya and Neste Singapore.
8. Knowledge in code book like AWS, ASME, API codes.
9. Must have good knowledge in coating inspections.
10. Must have a good knowledge about MT, PT, UT, RT Methods.
11. Must having an inspection experience in Exchanger, pressure vessels, piping and columns.

Responsibilities

· Carry out Electrical, Instrumentation, Control and Automation (EICA) design for water and wastewater treatment projects.

· Manage the procurement, costing and delivery of electrical software and hardware required

· Make automation programming according to clients’ technical specifications

· Arrange control panel assembly, testing, and installation at construction site

· Modification and Integration of new equipment / system with existing automation system

· Update of SCADA/HMI graphic to reflect new instruments/equipment and mapping these graphics to the corresponding field signals

· Attend to EICA breakdowns with diagnosis and solutions

· Attend meetings with subcontractors and clients for technical clarifications and arrangements.

· Coordinate with Project Managers to ensure deliverables are within the schedule.

· Keep records of EICA design, drawings, and document systematically

· Provide support and assistance to Sales Department and Maintenance Team

· Guide and educate junior EICA personnel.

· Other ad-hoc assignments.

Requirements

· Bachelor's Degree in Engineering (Computer/Telecommunication), Engineering (Electrical/Electronic) or equivalent.

· Minimum 3 years working experience at membrane base water treatment plant, preferably

· Proficient with Schneider / Siemens / Allen-bradley software

· Well-versed with SCADA and HMI

· Excellent communication skill

· Good personality and team spirit

Job Description

• Online and Offline Partial Discharge Measurements for HV electrical assets such as cables , transformers, switchgears , motors and generators
• Offline Cable testings (Hi-pot test, Megger test, Tangent Delta test) above 6.6kV rated Cables
• Infra-Red Thermography for HV and LV Switchboards
• Lightning protection and earthing system measurement.
• Assist to servicing maintenance work by project teams.
• Handling of multiple test equipment from Omicron, Doble Engineering,Qualitrol, IRIS Power, EA Technology, HVPD, PDS, B2 and IPEC

Requirement

· Bachelor Degree in Electrical Engineering (Preferably SIT, NTU)

· Training will be provided and fresh graduates are welcomed to apply

· Good interpersonal and communication skill.

· Team player & able to work independently

Transport is provided from 6 MRT pickup points ie Paya Lebar, Serangoon NEX, Bishan, Jurong East, Joon Koon, Woodlands

13th Month & Variable Bonus

The Solutions Engineer is responsible for the installation, technical support and maintenance of software applications that help customers manage their manufacturing processes and improve production efficiency. He/She should have a deep understanding of the application's functionality and backend. He/She is responsible for interacting with the application users and setting up, and onboarding of the users. He/She collaborates with the sales team to promote products and services to meet customers needs and requirements. He/She is also familiar with the relevant software platforms on which the solutions are deployed and uses critical thinking skills to identify and solve problems. The job requires being on standby with on-call availability and travelling to overseas customer sites.

Key Responsibilities

• Execute a project or test cut for Aerospace and PM part
• Doing time study and making a fixture concept for Aerospace and PM HV part
• Provide machine operation training to customers.
• Provide on-site technical support to for pre sales activities
• Actively visiting customer for post sales support
• Preparing Aerospace sample for sales usage
• Runoff for HV PM
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma in Mechanical Engineering or equivalent
• Familiar with 3 or 5 axis CAM Programming and Process Development
• High level of interpersonal skills and integrity
• Solid team player
• Good communication skill
• Willing to travel overseas for long term

Job Responsibilities

• Developing and designing network architecture and computer systems infrastructure.
• Overseeing the development, installation, and administration of computer systems.
• Monitoring computer systems and networks for viruses, malfunctions, and errors.
• Analyzing network data and infrastructure to determine inefficiencies and problems.
• Plan, design and manage AWS cloud implementations.
• Evaluate cyber security posture and recommend improvement.

Job Requirements

• Bachelor’s degree in Computer Science / Information Technology / or similar field.
• Solid working knowledge of networking (e.g. CCNA), Windows Domain, Office 365 administration, AWS cloud technologies and network security.
• At least 3 years of systems and network engineering related experience.
• Good communication skills in English.
• Good communication skills in Korean will be an added advantage

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.