Job Description & Requirements

• Perform general electrical maintenance including troubleshooting and repairing malfunctioning equipment.
• Identify the root cause and conduct analysis to generate solutions.
• Ensure completion of all protective maintenance duties are following the safety standards that complying with company policy.
• Install improvements and major upgrades to process system.
• Provide engineering support in project or plant maintenance
• Alert the Engineer Managers of any unusual incident that have taken place.
• Monitor the equipment process and prevent the equipment breakdown.
• Procedures for inspection, testing and certification of electrical fixed installations.
• Industrial hazards, safety and health precautions, and environmental concerns.
• Installation practice and regulations, and relevant codes of practice.

Job Requirements:

• Good interpersonal and communication skill
• Work independently
• Attention to details
• Good problem solving and observing skills

Responsibilities for this position include:

• Broad-based, hands on knowledge and experience with various types of instrument and electrical systems, equipment and software
• Troubleshoot electrical and instrumentation maintenance issues and complete appropriate documentation
• Update and archive electrical prints, PLC programs, and operator interface software, necessary for the documentation of projects that have gone into production
• Update and archive electrical prints, PLC programs, operator interface software, necessary for the documentation of projects that have gone into production
• Design electrical control and communication systems for production equipment
• Coordinate the installation of electrical equipment by contractors and plant personnel to meet scheduled completion dates
• Carry out the effective delivery of electrical, mechanical and fabric maintenance to both plant equipment and building equipment on the Client’s sites

Desired experience for electrical maintenance engineer includes:

• Provide technical support to Maintenance for AC and DC electronic drives, Programmable Logic Controllers, and control systems
• Provide cost estimates for new projects and system upgrades
• Develop specifications for projects to assure completion of work on schedule with required materials and workmanship
• Assist Production and Maintenance in the start-up and operation of new equipment and facilities

Responsibilities:

• Manage a team of technical supervisors on site to ensure that all site activities comply with the regulations and clients’ requirements
• Work closely with the Professional Engineers, regulatory authorities and contractors to provide supervision on site, to resolve all site issues and ensure timely completion of the projects
• Implement the site supervision quality and safety assurance system
• To carry out all inspection that is under KTP’s submission, Including ERSS, and specialist work that will need his supervision, whenever required.

Requirements:

• Degree in Civil Engineering recognised by BCA, Singapore
• Must be an accredited Resident Engineer with IES, Singapore, upon successful hiring
• Fresh graduates / Resident Engineers with other specializations are welcome to apply
• Candidates with HDB experience are an added advantage and strong encouraged to apply

Scope of job:

1. Installation and Commissioning:

• Install electrical systems, equipment, and machinery as per technical specifications and safety regulations.
• Assist in the commissioning of electrical systems and ensure they are operating correctly.
• Ensure all installations are in compliance with the relevant codes and standards.

2. Maintenance & Troubleshooting:

• Conduct routine maintenance checks on electrical systems to ensure efficient functioning.
• Diagnose faults, troubleshoot electrical problems, and repair or replace faulty components.
• Provide preventive maintenance to avoid breakdowns and optimize system performance.

3. Customer Support:

• Offer on-site and remote technical support to customers, ensuring customer satisfaction.
• Respond to customer queries and resolve electrical issues promptly.
• Provide training and guidance to customers on proper use and maintenance of electrical systems.

4. System Upgrades:

• Assess and recommend upgrades to existing electrical systems and equipment.
• Implement system improvements to enhance functionality, safety, and efficiency.

5. Safety & Compliance:

• Follow all safety protocols, electrical codes, and regulations to maintain a safe working environment.
• Conduct safety inspections and risk assessments on electrical systems and equipment.
• Ensure compliance with local, national, and industry-specific electrical standards.

6. Documentation & Reporting:

• Maintain accurate records of service activities, including repairs, maintenance, and customer interactions.
• Prepare and submit detailed reports on findings, repairs, and service schedules.
• Maintain an inventory of electrical components and tools.
• Monitor progress on the works carried out and coordinate with customer and shipyard on site during Repair and Commissioning Job.
• Prepare timesheets and service report upon completion of all works and ensure all document is properly endorsed/verified by customer and uploaded to serve on time.

7. Collaboration & Coordination:

• Work closely with project managers, technical teams, and clients to understand service requirements.
• Coordinate with suppliers and vendors for spare parts and service tools.
• Collaborate with colleagues to ensure efficient and effective project execution.

8. Continuous Improvement:

• Stay updated with the latest electrical technologies, techniques, and industry best practices.
• Attend training and certification programs to enhance skills and knowledge.
• Contribute ideas for improving service efficiency and customer satisfaction.

Required Skills & Qualifications:

· Education:

• A bachelor’s degree or equivalent qualification in Electrical Engineering, Electronics, or a related field.
• Certification in electrical systems or maintenance (e.g., NEC, NFPA) is a plus.

· Experience:

• Proven experience as an Electrical Service Engineer or similar role (typically 5 years above).
• Hands-on experience with electrical systems, wiring, motors, circuit boards, and related components.
• Familiarity with diagnostic tools, testing equipment, and electrical schematics.

· Technical Skills:

• Strong knowledge of electrical systems, circuits, and components.
• Proficient in using electrical diagnostic tools, multimeters, and testing devices.
• Understanding of electrical safety regulations and standards.

· Soft Skills:

• Excellent problem-solving and troubleshooting abilities.
• Strong communication skills (both verbal and written).
• Ability to work independently and as part of a team.
• Customer-oriented with a focus on delivering high-quality service.

Physical Requirements:

• Ability to lift and carry heavy electrical components and tools.
• Ability to work in confined spaces or at heights when required.
• Comfortable working in various weather conditions for outdoor jobs.
• Commissioning, start-up, and testing of mechanical, hydraulic, control system and electric integration system on newly build vessel.
• Recommendation of Spare Parts or solutions to customer during Repair or Troubleshoots Works.
• Constant monitoring of the progress and quality on the works carried out and coordinate with customer and shipyard on site during Repair and Commissioning Job.
• Ensure our Equipment’s perform as per requirement and satisfaction of Customer.

Work Environment:

• The role requires travel to client sites for installations, maintenance, and repairs.
• Work hours may vary based on project deadlines or emergency service calls.

Energy Engineer

12-month contract

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

About the Role:

In this role, you will support the site energy sustainability program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and manage projects to implement improvements.

Besides, you will support Engineering Services to meet profit plan targets, optimize cost effectiveness, and lower utility operation in accordance with cGMP and Safety guidelines, with emphasis on reliable and stable operation.

Critical Responsibilities but not limited to:

Cost Transformation and Energy Management

• Support cost transformation for utilities program. Will be the project owner, ensuring projects are implemented on schedule, validated in accordance to commitment and accuracy of reports. Conduct analysis; identify risks and proposal for mitigation and to report out to the governance committee.
• Support the site energy efficiency program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and drive projects to implement improvements.
• Support the site energy conservation program with all stakeholders to ensure site wide consistency in energy awareness, energy conservation and active participation in our site energy conservation program
• Support the computerized energy monitoring system for the site to drive efficiency and sustainability
• Support the development of annual and long-term strategic energy capital projects to ensure continuous energy efficiency improvement and energy conservation sustainability, in alignment with the site’s energy policies.
• Provide expertise in conducting energy audit, evaluating options and providing solutions
• Promote energy efficiency program for the company to ensure high level of awareness by all employees in energy usage and energy efficiency in equipment operation
• Network with the energy subject matter experts from other sites, the Global Energy Team, other Pharma Energy Improvement team and the government to recommend proven or new energy savings program and initiatives and continuously seek new energy conservation technologies with subject matter experts
• Monitor and analyze key performance indices and take mitigation actions to ensure objectives are met and where appropriate to escalate

Engineering Services Support

• Coordinate with GES on site process engineering design, construction and equipment validation activities when appropriate
• Supports Energy Lead – Engineering to develop Profit Plan forecast, execute activities to meet production, cost effectiveness, and cost reduction targets
• Any other tasks as and when assigned by Energy Lead

Management of Maintenance, Utilities & Facilities

• Support utility / process / system energy efficiency program – compilation of data, analysis of data and recommendation to stakeholders to reduce wastage or find alternative energy efficient methodology
• Collaborate with maintenance and utilities managers to ensure all equipment have an effective PM or predictive program to ensure all equipment are in high energy efficiency operations
• Support the development of system and program to track energy conservation projects, cost savings from new initiatives and prepare stretch goal for each year to reduce cost of energy for the site
• Prepare utility budgets, monitor actual billing spending and track energy conservation projects against this budget. Analyze and report out risk and mitigation plans.
• Coordinate the implementation of energy projects with utilities operation with least impact to manufacturing

Management of Capital Plans & Projects

• Recommend energy efficient process, system or proven equipment to Project Engineers in their capital planning process or in their capital procurement plan
• Coordinate and update global energy project planning system to maintain a good energy conservation pipeline for each year and over a 3-5 years period to ensure energy sustainability and reducing site energy consumption levels
• Ensure projects are timely, on budget and completed in compliance to safety and quality
• Due to diversity of the site and the complexity of projects, priority of projects and changes of priority affects the planning process. This position is frequently required to take appropriate decisions and actions to engage stake holders from peer level or next level managers for resolution. For the energy reduction role, he is to analyze, develop projects, prioritize and plan for the resources to complete the projects.

SHE

• Consistently show safety leadership by demonstrating advance understanding of all safety procedures and standards
• Seek opportunities to improve company SHE standards and move company towards goal on injury free workplace & better environment

cGMP Standards

• Consistently demonstrates advanced understanding of the importance of cGMP and WQS standards
• Consistently demonstrates an advanced understanding of the importance of cGMP regulations related to their work and consistently develops and executes appropriate solutions
• Seek opportunities to improve company cGMP standards and move company towards goal of Sustainable Compliance
• Subsystem owner for QMS Chapter 18 – Plant Maintenance Calibration.

Requirements:

• Bachelor’s Degree in Engineering related fields
• Singapore Certified Energy Manager
• At least 5 years’ experience in energy engineering, manufacturing, consultancy or equivalent industry
• Demonstrate leadership behaviour
• Project management expertise to execute large and/or complex projects, work in cross-functional teams to complete projects successfully within budget, schedule and quality requirements.
• Knowledge of applicable regulations and divisional policies/guidelines, especially equipment design, equipment qualification, preventive maintenance, and calibration.
• Demonstrated capability in vendor service contracts management & knowledge of our System Life Cycle Methodology.
• Understands maintenance programs and requirements (reliability-centred, preventative, predictive).
• Stewardship awareness, including cGMP, regulatory inspection preparation, and SHE.

Reg No: R22104540

EA License no: 94C3609

Professional are responsible for identifying, analyzing, and relating business
demands. Your responsibilities include aligning priorities, planning and actions
to the overall business objectives. And involve business stakeholders. You will
share and communicate knowledge and innovation. You have knowledge of
the fundamentals of the Semco business model and the value chain.
The function is directly responsible to assist the Project Manager in all aspects
of the assigned project.

• Assist Project Engineers in producing telecom system drawings for
approval submission
• Check system compliance for project requirements and translate to project
documents.
• Checking of equipment ordered for a specific project, ensuring technical
compliance with relevant specification requirements
• Provide project progress updates and status reports to Project Manager
• Provide technical support to system assembly and fabrication, and ensure
assembly is done according to project requirements
• Assist Project Engineers to organize and plan usage of available
resources to achieve optimal performance and cost efficiency for each project
• Assist Project Engineer to report, follow-up and resolve on
non-conformance issues and customers’ complaints
• To maintain Semco’s quality policy and take active part in implementing
quality system
• Critical adherence to deadlines
• Assist the Project Engineer to monitor project deliverables in terms of
delivery and quality control
• Assist in site commissioning if required

We are looking for individuals with the following qualifications and experience:

• Education: Bachelor's Degree in Telecommunications, Electrical & Electronics Engineering, Computer Engineering, or IT.
• Experience: Entry-level candidates welcome

Personal Qualities:

• Excellent analytical and problem-solving skills.
• Strong attention to detail and organizational skills.
• Team player with a positive and proactive attitude.
• Excellent communication and interpersonal skills (written and spoken English).
• Ability to work independently and as part of a team.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Technology Solutions Office is looking for Software Engineer

Internal Code: A25025

What will you do?

• Work with project leads, developers and operations on a live commercial project that has more than one million users on its platform.
• Software support and maintenance of deployed products and solutions
• Work closely with project management and experience design team to deliver project outcomes

• Strong hand-on experience in NodeJS Technologies
• Solid hand-on experience with AngularJS, ReactJS
• Knowledge of Object-Oriented Programming and SQL
• Experience with React Native, Microsoft SharePoint is a plus
• Proficient knowledge of languages such as .NET and/or Java will be a plus
• Ability to manage a hosting environment, including database administration as well as scaling applications to handle load changes
• Experienced in developing on Unix/Linux environments
• Effective communication skills & customer-oriented mindset
• Ability to work with a multiple team and stakeholders
• Enjoy constant learning and working with new technologies
• Excellent critical thinking and problem solving skills
• Experience in public sector projects is a plus
• Candidates who had previously managed small teams will be considered for the Senior/Lead positions
• Appointment will commensurate with experience and qualification.
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is strongly preferred.

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Job Descriptions:

• Technical window for new product development.
• Involvement in developing the methodology for implementation of new and improved processes.
• Perform hands-on testing such as setting up the presses, moulds, process development and other engineering activities.
• Develop and document moulding processes, ensuring they meet all technical and quality standards, including DOE and process window study.
• Utilize scientific moulding principles to analyse and troubleshoot process issues, implementing corrective actions to improve efficiency and product quality.
• Preparation of process-related technical documentation, like FMEA, validation protocol, engineering report, evaluation processing parameters and data.
• Trial new tooling and equipment and make modifications as needed to meet quality and production goals.
• Liaison with customer engineering teams, incorporate customer engineering concepts, and ideas into feasible designs to fit facility/company manufacturing process.
• Use creative skills to assist in solving design or manufacturing issues or constraints.
• Provide primary tooling component and packaging cost input for quotation of new business.
• Work closely with the internal engineering team and outside vendors in tooling, equipment, component and material development.
• Work closely with customers on product, project or system development issues.
• Keep up on the latest industry standards, processes and procedures.
• Participate in formal improvement team activities.
• Support all development and initiate improvements to achieve business objectives.
• Travel to other sites and customer sites to perform testing onsite and knowledge transfer when required.
• Other tasks as assigned by supervisors/managers.

Requirements:

• Diploma/Degree in Mechanical Engineering/relevant field
• Strong mechanical aptitude and problem-solving skills.
• 5 years of hands-on working experience and process DOE will be a plus.
• Experience in the Medical Device Manufacturing industry.
• Experience in LSR will be a plus.
• Experience in Minitab software will be a plus.
• ISO9001 and ISO13485 awareness certification will be a plus.
• Good communication skills.
• Lead the technical team and provide training where required.
• Able to liaise with customers and interact with relevant persons in technical discussions.

· Preparation of design report, calculation, drawings, specification, cost estimates and schedules for project assigned

· Management of preparation, liaison, and follow up with authority submission and approval.

· Liaison with client, architects, QS and other project consultants throughout the duration of projects.

· Supervise and guide employees assigned to the projects

· Role as project manager

· Implementation of QA/ QC

· Any other duties as assigned

Requirements:

· Degree in Electrical Engineering from a recognized University and eligible for registration with the Professional Engineers Board

· Professional Engineer Certification will be an advantage

· At least 6 years of working experience in engineering design consulting practice on mechanical projects.

· Good project technical knowledge and design softwares

· Good project management and technical skills

· Familiar with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Team player and able to work independent with minimum supervision

· Able to work under pressure with good time management skill

· Good analytical skills would be preferred

If you wish to have the opportunity to work in an international consultancy firm which offers attractive remuneration, a 5-day week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park #06-08

The Strategy Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified.)

Purpose: To manage and provide technical support of IT systems and networks, to ensure uninterrupted and secured business operation, and compliance with VDL/ETG standards and roadmap.

Key Area of Responsibilities:

• Maintain and update all information technology (IT) systems, devices and peripherals, within the company to ensure stable and reliable performance.
• Maintain and update the company’s network infrastructure and adhere to the parameters & static address tables according to the One-ETG standard.
• Trouble-shoot and resolve all IT-related technical issues and prevent re-occurrences.
• Ensure security and proper access control of all IT systems, networks and data, so that they are free from malware, spyware, hacking, illegal software and unauthorized access.
• Create regular backups of all relevant company data and store it safely, to ensure Business Continuity, in case of systems and/or network outage.
• Research and benchmark new developments in the IT industry, and propose improvements to business processes to save costs and drive for better efficiency and productivity.
• Source, communicate and manage external parties or service providers that provide service support and maintenance to operational IT matters.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Degree in Computer Science/Electrical and Electronic Engineering or other relevant field.
• Minimum 3 years of working as a system support engineer in the semiconductor industry or other similar roles.
• Proficient in Microsoft Excel functions
• Good communication skills

Job Description

• Interpret contract specifications, architectural standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manage budgets; write reports; and carry out additional administrative duties associated with the projects that are allocated
• Oversee architectural planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise and prepare construction and architectural documents and drawings
• Oversee architectural projects, communicate with clients and subcontractors regarding architectural issues, and guarantee the highest levels of architectural workmanship
• Provide the architectural designers with technical guidance on building requirements
• Organize and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in engineering
• Min 3 years of construction experience

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities

• Developing and designing network architecture and computer systems infrastructure.
• Overseeing the development, installation, and administration of computer systems.
• Monitoring computer systems and networks for viruses, malfunctions, and errors.
• Analyzing network data and infrastructure to determine inefficiencies and problems.
• Plan, design and manage AWS cloud implementations.
• Evaluate cyber security posture and recommend improvement.

Job Requirements

• Bachelor’s degree in Computer Science / Information Technology / or similar field.
• Solid working knowledge of networking (e.g. CCNA), Windows Domain, Office 365 administration, AWS cloud technologies and network security.
• At least 3 years of systems and network engineering related experience.
• Good communication skills in English.
• Good communication skills in Korean will be an added advantage

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

Sales Engineer offers specialized chemistry programs and related services for downstream oil and gas operations, aimed at maximizing production, protecting assets, and reducing operating costs and environmental impact. Through on-site problem-solving and innovative technologies, our team delivers solutions that assist energy customers in overcoming complex challenges in the most demanding energy frontiers. Our downstream team utilizes advanced chemistries and technologies to provide Oil & Gas customers with comprehensive and sustainable solutions to safeguard their assets, mitigate risks, and enhance profitability

Responsibilities:

• Leading Chemical Treatment Programs: Responsible for the chemical treatment programs at the client’s site, ensuring optimal performance and promptly addressing any deviations from the treatment plan.
• Analytical Field Testing: Comprehend the principles of field testing procedures and collaborate with service technicians to perform routine field testing
• Reporting and Communication: Provide regular chemical treatment program reports to clients, keeping them informed about progress and updates according to the agreed schedule.
• Inventory and Equipment Management: Oversee the planning of chemical stock levels in Singapore and manage inventory at client sites. Maintain an equipment maintenance program to ensure 100% equipment uptime and seamless operations.
• Monthly Technical Review: Prepare and deliver comprehensive monthly review materials to clients. These reviews serve as a valuable platform for discussing program effectiveness and identifying areas for improvement.
• Value-Added Projects: Actively source and develop value-added projects in collaboration with clients. These projects are designed to reduce the Total Cost of Operation (TCO) with Ecolab’s product.
• Troubleshooting and Collaboration: When clients encounter challenges related to chemical treatment programs or Ecolab’s products, step in to troubleshoot and collaborate with team members to find solutions.
• Proposal Development for New Opportunity: Develop chemical treatment proposals to enhance efficiency and address specific client requirements. Present new chemical treatment proposals to client. Lead the initiation and evaluation of new applications.
• Contract Management: Collaborate with application engineers and service technicians to ensure compliance with contractual obligations.
• Business Performance Review: Prepare and present the executive performance results material to the key client stakeholders and the head of the department. This can occur quarterly, half yearly or annually depending on contract obligation.
• Client Relationship Management: Building and nurturing strong relationships with clients is paramount. Frequent engagement ensures effective communication and mutual understanding.
• Billing and Invoicing Process: Maintain bookkeeping for client accounts under your responsibility. Verify billing amounts and work with the billing team to issue invoices to customers.

Requirements:

• Bachelor’s Degree (Chemical Engineering) with at least 8 years of relevant technical Sales & Service experience
• Should have technical sales or field sales support experience
• Must have a valid Class 3/3A Singapore Driver’s License
• Working knowledge of boilers, cooling towers, and wastewater treatment systems
• Experience with refinery or chemical processing is advantageous
• Curious and eagle to find out what customers’ needs and good approach to solutioning
• Effective critical thinking and problem solving skills
• Customer oriented and always ready to engage with customers
• Able to work in a refinery/chemical plant

As a Salvage engineer, the world is your playground. You never know when or where a ship gets into trouble. That is why for a Salvage Engineer literally every day is different. It sounds like a cliché, but it is the reality. As a Salvage Engineer, you will have an adventurous job. When a ship is in distress, you will travel to the emergency scene with a multidisciplinary team. Once on-site, you work together with the team to repair the ship's plant and get the systems up and running again. It is vital to salvage the vessel as quickly as possible. As well as working on actual ship salvage operations.

Your responsibilities as a Salvage Engineer

• As part of the mobile team, provide support to the Salvage Master/Project Manager at site.
• When at base, assisting the technical manager and the operations manager in the selection of new salvage equipment and setting up the right maintenance procedures.
• Maintaining company owned salvage equipment.
• Sharing knowledge with other engineers about complex ship's systems.
• Advising the salvage inspector and superintendent about how to break into existing ship's systems in order to use them during the salvage operation.
• Producing reports about the actions taken to get systems operational again. As you can expect from a leading international maritime service company, you will work with state-of-the-art equipment.

Your qualities
To make your mark as a salvage engineer with SMIT Salvage, you will need a flexible approach; you never know when or where your next project will be. You adapt easily to working with different teams and you are fully proficient in English. Of course, you are happy to work irregular hours and to spend longer periods of time abroad. In addition, you have:

• A minimum degree in any field with experience sailing onboard ships.
• Worked for at least 5 years on modern (merchant) ships.
• Preferably experience with a range of different types of vessels and engine-room plants.
• Willingness to work on weekends and public holidays frequently, with OT and allowances compensated.

We are seeking a highly skilled and motivated Project Engineer to join our team in the marine field. The successful candidate will manage and oversee projects from inception to completion, ensuring all objectives are met on time and within budget. The Project Engineer will coordinate on-site activities, working closely with designers, shipyards, and vendors to drive project success. This role requires strong leadership, exceptional organizational skills, and the ability to communicate effectively with diverse teams and stakeholders.

We are seeking a highly skilled and innovative Executive Engineer, Electrical to join our dynamic team in Singapore. In this role, you will be responsible for designing and executing electrical engineering systems for various projects.

• Design and develop electrical systems for building and infrastructure projects, including concept and detailed design phases
• Take ownership of assigned design components, ensuring timely completion and approval from relevant authorities and clients
• Collaborate with Local Authority Departments to secure approvals for design projects
• Prepare comprehensive design calculations, drawings, specifications, and tender documents under the guidance of senior engineers
• Analyze and solve complex electrical engineering problems, applying innovative solutions when necessary
• Ensure compliance with all relevant statutory regulations and safety standards in project designs
• Contribute to the continuous improvement of electrical engineering processes and methodologies
• Mentor and guide junior team members, fostering a collaborative and knowledge-sharing environment
• Participate in project meetings and present technical information to stakeholders effectively

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Technology Solutions Office is looking for Lead Software Engineer (Java)

Internal Code: A25022

What will you do?

• Manage a team of software engineers, including task planning and code reviews
• Take charge of technical projects and provide leadership in a fast-paced environment
• Responsible for the overall planning, execution, and success of complex technical projects
• Work closely with project management and experience design team to deliver project outcomes
• Contribute technically to projects
• Mentor the best talent bringing out the best in every engineer
• Nurture a culture of high performance, continuous improvement, creative problem solving, and innovation within the team

What are we looking for?

• Strong experience with Java Technologies
• Experience in ReactJS is a plus
• Software support and maintenance of deployed products and solutions
• At least 5 years of total software engineering experience with a thorough understanding of commercial software product development.
• 3+ years of experience in a software engineering leadership position
• Customer oriented and skilled in developing a strong understanding of customer needs and marrying those with optimal technology solutions
• Knowledge of Object Oriented Programming and SQL
• Ability to manage a hosting environment, including database administration as well as scaling applications to handle load changes
• Understanding of front-end web technologies
• Experienced in developing on Unix/Linux environments
• Enjoy constant learning and working with new technologies
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is required

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Tasks:

● Develop and implement navigation algorithms for autonomous robots, including

localization, mapping, and path planning.

● Integrate sensor data from various sources (lidar, cameras, IMUs) to improve robot

perception and navigation capabilities.

● Work with simulation tools to validate and debug navigation algorithms in a virtual

environment.

● Collaborate with other team members to ensure overall system integration and

functionality.

Education:

● A bachelor's or master's degree in Robotics, Computer Science, Electrical

Engineering, or a related field is typically required.

Technical Skills:

● Robotics: In-depth understanding of robotic systems, kinematics, dynamics,

and control theory.

● Navigation algorithms: Proficiency in developing localization, mapping, and

path planning algorithms for autonomous robots.

● Sensor fusion: Experience with integrating data from various sensors (such as

lidar, cameras, IMUs) to improve robot perception and navigation.

● Linux, ROS, C++ and Python are your thing and you are familiar with modern

software development processes.

● Simulation tools: Experience with robotic simulation frameworks like Gazebo

or V-REP.

● Problem-solving and analytical skills: Strong analytical and problem-solving

abilities are vital for identifying issues, debugging complex systems, and

proposing effective solutions.

● Communication and teamwork: Excellent verbal and written communication

skills to collaborate with cross-functional teams, document technical

specifications, and present findings effectively.

Experience:

● Robotic navigation: Prior experience in developing navigation systems for

autonomous robots, including localization, mapping, and path planning.

● Sensor integration: Knowledge of integrating sensors like lidar, cameras, or

IMUs into the navigation system.

● ROS: Practical experience with the Robot Operating System (ROS) for robotic

software development and integration.

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Responsibilities：

1. Responsible for pre-sales support of products and problem solving solutions, assisting sales to research and analyze customer demand, formulating technical proposal and tender, expounding on technical solutions, demonstrating products and answering technical inquiries.

2. Assist sales to promote and sell products and problem solving solutions.

3. Collect and feed back customer’s opinions on products and technology to the technical department. Deepen solutions according to customer’s demand, and assist technical engineers to implement solutions.

4. Conduct relevant technical training for internal sales and pre-sales as well as external partners.

Requirements：

1. Bachelor degree or above; Computer, automatization or logistics majors are preferred.

2. Have three years and above experience in logistics automation, e-commerce or ERP-WMS; Experience in solution design, technical consultation, and project bidding is preferred.

3. Capable of analyzing, guiding demand and designing solutions in logistics, manufacturing storage, e-commerce and related IT systems.

4. Problem solving oriented , honest, pragmatic and responsible, highly enthusiastic and a team player.

5. Good communication and presentation skills, English can be used as working language; Proficiency in two or more foreign languages is preferred.

6. Willing to travel a lot.

...