Job Description

• Responsible for all on-site technical and engineering matters
• Ensuring works carried out meet company's quality standards & contractual requirements
• Involved in project planning, monitoring project progress and schedule
• To co-ordinate with the client, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Assisting Project Manager in monthly progress claims and monthly progress reports.
• Ensuring supervisors & foremen meets client & regulatory work requirements.
• Ensuring Environmental, Safety and Health practices are carried out at all times.

Job Requirements

• Min 3 years in Project planning, coordination is a must.
• Degree in Civil or Structural Engineering recognized by Professional Engineers Board Singapore or Building Construction Authority Singapore is a must.
• Min 3-5 years of Civil Engineering Experience
• Required skill(s): Precast will be preferred.
• Proficient in Microsoft Office
• Organised, meticulous with positive work attitude
• Good interpersonal and analytical skills
• BCSS or equivalent
• Able to start work on short notice
• Candidates will also be considered for Project Engineer (Planning- Civil Engineering) position based on education level and working experience.

Job Descriptions:

• Valve remote control and tank gauging system

• Hydraulic deck machinery testing/ commissioning/ service

• Installation, maintenance and upgrade these systems and related equipment , including inspection, testing and repair

• Carryout testing and inspections by company policies and procedures

• Must have relevant experience in Electrical/ Instrumentation/ Hydraulic fields

• Able to read and understand the electrical drawings and P&ID/ hydraulic circuits

• Need to work onboard the ship (shipyard, anchorage, offshore) if necessary

• Travel to overseas for service job when necessary

• Preferred background knowledges:

• Hydraulic/ Pneumatic/ Electric Actuator functions/ principles

• Hydraulic Power Units functions/ Trouble Shooting/ Service

• Electrical Motor Stater panel troubleshoot, solenoid control, instrumentation, Automation control troubleshoot

• Basic knowledge for the PLC Programming upload/ download/ Scada/ HMI

Requirements:

• Minimum Diploma/ Degree in Electrical/ Mechanical Engineer

• Minimum 3 years of relevant working especially in Marine/ Offshore/ Instrumentation & Control/ Hydraulic

• A self-starter

• Comfortable working independently and working with team members

• Innovative thinking, thinking outside-the-box, resourceful problem solver

• Excellent communication and interpersonal skills

Job Benefits

Excellent learning environment

Positive and closely knitted working environment

Working location:

15 Kwong Min Road

Singapore 628718

Shortlisted candidate will be notified

• Design: Create plans, blueprints, and models, and design systems like heating, ventilation, lighting, and air conditioning
• Review: Review and evaluate blueprints and designs, and identify and fix issues
• Analyze: Analyze structures to ensure they can withstand their intended use and environmental conditions
• Comply: Understand and comply with regulations and building codes
• Test: Ensure safety and test systems
• Monitor: Use computer-based software to design and monitor systems
• Collaborate: Work with architects, civil engineers, or construction crews to develop solutions to structural problems

Job Description

• To assist engineering supervisor in the review of project orders relevant specification and/or data sheets
• Act as secondary check and make recommendation based on common industrial engineering practice, where necessary
• To aid supervisor in providing and implementing cost effective and best engineering solutions for project in order to stay competitive
• To support sales, project and production team on various aspects of technical/engineering matters
• To prepare and maintain accurate engineering documents, i.e. general assembly drawing with BOM, control schematic drawing, test procedure, data sheet and engineering library
• Manage engineering change function and ensure engineering documents are updated accordingly
• To support and assist engineering supervisor in providing sound engineering practice and engineering calculation where applicable in a timely manner top meet project timeline
• Providing field support for the customers to resolve after sales / any technical issues
• Travel along with Technicians to installation base and sites if situation arises
• To act as the main administrator and to maintain the SAP item master data
• To assist engineering supervisor and manager to drive the department’s improvement programs and/or process efficiency initiatives
• Perform additional related duties as requested or required

Job Requirement

• Bachelor degree / Diploma in Mechanical/Instrumentation or equivalent
• 1-2 years experience in either marine, oil & gas or automation industry is preferred
• Possess knowledge in instrumentation and control system
• Conversant with all industrial standards related to valve automation
• Able to read and interpret drawings, specifications and technical documents
• Knowledge of Autocad 2D/3D or drafting software and SAP will be an advantage
• Strong verbal and written communication skills
• Fresh graduates are welcome to apply for this entry level position

Are you a talent looking to build business skills, gain experience, and take on exciting challenges?

Grow your career with Trelleborg and start shaping the industry from the inside.

About the Job

Trelleborg Singapore is looking for an excellent Design Engineer to join the Research and Development team. Reporting to the Engineering Director, you will be responsible to finish the design, modelling & drafting work allocated to you by your seniors in an efficient and timely manner. This job will entail completion of 3D models and engineering drawings, maintaining work documentation and keeping all projects organized. The duties and responsibilities of the Design Engineer is not limited to those listed below and are subject to change as per needs of the business.

• Provide engineered design & engineering to clients from conceptual design till award of the project.
• Efficiency run and maintain innovative finite element analysis tools within Trelleborg Group and its associated companies.
• Innovative and creative to promote and launch new product line to increase market share and profitability.
• Key collaboration with Sales & Marketing, Procurement, Technical, Production and customers to achieve agreement and clarification for new product design specifications. Implement work in accordance with applicable project procedures and standards.
• Establishment of the design work requirements for submission. The design work are drawings, engineering data sheets, design & engineering specification solution documents.
• Review design work together with the FEED design consultants/engineers and ensure that in order for submission.
• Attend engineering clarification meetings as and when required and also assist QA/QC to address engineering issues and establish method statements. Oversee new products' testing, new testing standard & procedure preparation and analyse results.
• Able to attend short overseas assignments when required.

About the Ideal Candidate

• Ideally a bachelor’s degree in Engineering or equivalent; minimum 2 years’ experience in engineering design
• Proven excellent skill in usage of CAD Solidworks and FEA Abaqus
• Have a good understanding of product realization process from development to production
• Strong Project Management skills
• An excellent teammate able to work well with all levels of people across various regions and cultures
• Good problem solving and interpersonal skills
• Good time management, proactive and able to work effectively in a fast-paced environment
• Ideally has knowledge and experience in the maritime, infrastructure, engineering or manufacturing environments but if no formal professional exposure, the candidate must demonstrate a keen interest in learning and acquiring the relevant industry knowledge to build compelling content
• Strong project and vendor leadership skills
• Possesses high level of integrity with good work ethics

Trelleborg is an equal opportunity employer! We celebrate diversity and are committed to creating an inclusive environment for all employees.

Don’t delay, apply today by submitting your CV along with your expected salary and notice period!

At Trelleborg our people are #shapingindustryfromtheinside

Responsibilities:

Project Planning & Coordination

• Collaborate with project managers to define project scope, goals, and deliverables.
• Develop detailed project plans, including timelines, budgets, and resource allocation.
• Coordinate with internal teams and external stakeholders to align on project requirements.

Technical Oversight

• Review and interpret technical drawings, specifications and contracts.
• Provide engineering solutions to technical challenges and ensure compliance with industry standards.
• Oversee procurement and ensure materials meet project specifications.

Take-Off and Budget Management

• Prepare accurate Bills of Quantities (BQ) and cost estimates for projects.
• Conduct quantity take-offs from technical drawings and specifications.
• Monitor project costs, manage budgets and implement cost control measures to minimize overruns.

Tendering Assistance

• Support the tendering process by preparing bid documents, reviewing contractor bids, and evaluating technical and financial submissions.
• Assist in drafting and reviewing contracts and agreements.
• Work closely with procurement teams to ensure alignment with project goals and timelines.

Project Execution

• Monitor project progress, ensuring adherence to quality standards, timelines, and budgets.
• Manage changes to the project scope, schedule, and costs through appropriate processes.
• Conduct site visits to oversee construction, installations, or implementations as required.

Communication & Reporting

• Act as the point of contact between clients, contractors, and other stakeholders.
• Prepare and present regular progress reports, technical updates, and cost analyses.
• Address and resolve project-related issues and conflicts.

Risk Management

• Identify potential project risks and develop mitigation plans.
• Ensure safety protocols and compliance with environmental regulations.

Requirements:

• Bachelor’s degree in Engineering (Civil, Mechanical, Electrical, or related field).
• Preferable 3 years experience in project management or engineering roles in oil and gas industry.
• Strong knowledge of engineering principles, budget control, and tendering processes.
• Excellent communication, problem-solving and leadership skills.
• Proficiency in project management software (e.g., MS Project, Primavera), Excel Worksheet, Word Document, Power Point Presentation, AutoCAD, cost estimation tools and BQ preparation software.
• Experience in tender evaluation and contract management.
• Strong organizational and multitasking abilities.
• Wiling to work at project sites and may require extended hours to meet deadlines.
• This role is well-suited for a detail-oriented professional with expertise in project costing, budget management, and tendering who is passionate about engineering project delivery.

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment in order to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures
  Witness and provide contractor resources to support FAT as required.
• Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

A welding supervisor in Singapore manages welding operations on construction sites, ensuring that projects are completed on time and within budget. Their responsibilities include:

• Supervising welding activities: Ensuring that welding work meets quality standards, project specifications, and safety protocols
• Scheduling and assigning tasks: Optimizing workflows to meet project timelines
• Inspecting welding work: Verifying that welding work is structurally sound and complies with regulatory standards
• Providing technical guidance: Training welders to improve their performance and skills
• Collaborating with other teams: Working with project managers, engineers, and other construction supervisors to integrate welding activities into the broader project plan
• Maintaining records: Monitoring and recording welding progress, equipment usage, and team performance
• Ensuring proper equipment use: Ensuring that welding equipment is properly used, maintained, and calibrated
• Identifying and addressing issues: Identifying potential issues on-site and taking corrective action
• Maintaining a safety culture: Enforcing health and safety regulations, promoting safe work practices, and conducting safety briefings

· To identify project : Active participation and identification of prospective project through regular contacts with customer (face to customer)

· To liaise with allocated customer for sales acquisition

· To review customer requirements and prepare offers to allocated customer and follow-up offers with customer and keep updated project information

· To finalise and negotiate on contract with customers

· To commit and achieve the order intake budget

· To prepare project schedules

· To maintain existing account and help expand sales network

· Good contact with M&E Contractors & Consultant

Responsibilities

• Perform Reliability, Maintainability and Supportability (RMS) analysis, to ensure an effective through life support capability package to support the System.
• Engage design engineers on design specifications and influence Reliability and Maintainability (RAM) in their design.
• Engage customers and contractors, and to ensure RAM and ILS deliverables are on schedule and of quality.
• Lead ILS team of technical writers, technical trainers and supply support management to ensure supportability of the Systems.

Requirements

• Degree in Mechanical Engineering or Mechatronics Engineering or equivalent.
• Preferably RAM and ILS knowledge. Training / OJT will be provided, if not equipped with basic statistics skills.
• Preferably knowledge in either Automotive and/or Artillery systems.
• Meticulous in quantitative analysis and strong in statistical analysis.
• Good leadership skills and project management skills.
• Strong communication & interpersonal skills.
• Entry Level candidate are welcome to apply

Operational Support:

• Assist the Account Manager in coordinating and prioritizing maintenance tasks, addressing issues encountered by the team.

• Support the optimization of manpower, standard time, equipment, and energy usage.

• Provide regular updates on maintenance activities and help resolve operational challenges.

Customer Relationship Management:

• Assist in responding to customer complaints and support customer satisfaction investigations.

• Work with the Account Manager to collect feedback from customers, Dealers/Distributors, and maintain positive relationships.

• Help escalate complex issues to the Account Manager that may impact service quality or business performance.

Financial Support:

• Assist the Account Manager in monitoring financial performance, documenting expenses, and helping to track account receivables.

• Support the management of after-sales service delivery, including the use of Microsoft Business Central for financial tracking.

• Aid in the preparation of financial reports, including service revenue and margin data.

Team Management:

• Provide administrative support in the recruitment, interviewing, and training of technicians as required by workload demands.

• Support the management of a team of technicians by tracking their schedules, workload, and performance metrics.

• Help facilitate communication between technicians, subcontractors, OEMs and the Account Manager to ensure smooth operations.

Logistics and Procurement:

• Assist with parts, materials, and tools procurement for scheduled maintenance, repairs, and emergency service calls.

• Support logistics planning to ensure that the necessary resources are available for maintenance activities.

• Aid in the coordination with subcontractors, from comparing quotations to ensuring timely delivery of services and materials.

Contract and Quotation Support:

• Help in the preparation and management of contract renewals, ensuring that all necessary documentation is in place.

• Assist the Account Manager in generating quotations for simple repairs and service requests.

Health, Safety, and Compliance:

• Help drive Environmental, Health, and Safety (EH&S) initiatives, ensuring compliance during all maintenance operations.

• Support the monitoring of safety standards and participate in creating EH&S awareness within the team.

Performance Metrics:

• Assist in tracking and reporting key performance indicators (KPIs), such as technician productivity, field expenses, and Aftermarket Service Sales revenue.

• Provide regular feedback on operational performance to the Account Manager.

We are looking for Electrical Engineers to expand our team.
Candidates with no experience are welcome to apply.

Responsibilities:

• Draw or modify electrical and GA diagrams or write engineering specifications to clarify design details and functional criteria of the equipment with respect to customers' requirement
• Conduct inspection and quality check of electrical equipment
• Conduct installation and troubleshooting of electrical equipment
• Set up and operate test equipment for calibration or configuration of electrical equipment
• Keen mind on quality management, with good documentation, continuous improvement of processes.
• Keen mind on operational planning to ensure good continuous supply of equipment for customers and internal requirement
• Support sales personnel for technical clarifications with customers
• Involve in pre-sales activity of machinery sales, e.g. sizing of generators, studying of tender documents etc.

Requirements:

• Minimum Diploma in Electrical Engineering or any relevant course
• Candidates with no experience are welcome to apply
• Ability to read and amend schematic drawings & circuit drawings
• Experience and knowledge in generators a plus
• Excellent interpersonal and communication skills

Planning co-ordination with main contractor and sub-contractor

- Arrange and co-ordination for fabrication and installation of steel structural

- Arrange and co-ordination of manpower for fabrication and installation

- Preparation Mathod Statement, risk accessment and safe work procedure

- willing to learn & positive mindset

- Email send to [email protected]

RESPONSIBILITIES
Able to utilize advanced skills to perform complex preventive maintenance and corrective repair of buildings, industrial systems, vehicles, equipment and grounds. Working under limited supervision, monitors building system operations and performance. Utilizes several trade skills such as carpentry, plumbing, electrical, painting, roofing, heating and cooling.Complies with all applicable codes, regulations, governmental agency and Company directives related to building operations and work safety.

ESSENTIAL DUTIES AND RESPONSIBILITIES

Inspects building systems including fire alarms, HVAC, and plumbing to ensure operation of equipment is within design capabilities and achieves environmental conditions prescribed by client.

Oversees and inspects the work performed by outside contractors. Contracted work includes landscaping, snow removal, remodeling, HVAC, plumbers, and cleaning.

Performs assigned repairs, emergency and preventive maintenance. Completes maintenance and repair records as required.

Reviews assigned work orders. Estimates time and materials needed to complete repair. Orders necessary materials and supplies to complete all tasks.

Maintains an energy management program to ensure measures are taken to operate all systems in the most efficient manner to keep operating costs at a minimum.

Maintains the building lighting system, including element and ballast repairs or replacements.

Performs welding, carpentry, furniture assembly and locksmith tasks as needed.

Responds quickly to emergency situations, summoning additional assistance as needed.

Performs other duties as assigned.

Job Description & Requirements
Responsibilities:

Develop software solutions by studying information needs; conferring with users; studying systems flow, data usage and work processes; investigating problem areas; following the software development lifecycle.


Determine operational feasibility by evaluating analysis, problem definition, requirements, solution development and proposed solutions


Document and demonstrate solutions by developing documentation, flowcharts, layouts, diagrams, charts, code comments and clear code


Prepare and install solutions by determining and designing system specifications, standards and programming
Improve operations by conducting systems analysis; recommending changes in policies and procedures


Update job knowledge by studying state-of-the-art development tools, programming techniques and computing equipment; participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations


Protect operations by keeping information confidential
Provide information by collecting, analyzing and summarizing development and service issues


Accomplish engineering and organization mission by completing related results as needed


Support and develop software engineers by providing advice, coaching and educational opportunities


First and foremost, developing software our users need
Mentor junior and mid-level engineers


Collaborate with team to brainstorm and create new products
Grow engineering teams by interviewing, recruiting and hiring
Make informed decisions quickly and taking ownership of services and applications at scale


Work collaboratively with others to achieve goals
Be a persistent, creative problem ­solver
Remain cool and effective in a crisis
Stay on the leading edge of development practices


Passionate about great technologies, especially open source
Understand business needs and know how to create the tools to manage them

Job Description:

• Develop a Non-Routine Lifting program and advise the Construction Manager accordingly.
• Develop specific Lift Plans.
• Liaise with the Engineering Department for engineering calculations and drawings as required to develop specific Lift Plans according to his Lifting program.
• Prepares procedure in coordination with vendors for internal shifting and load out operations.
• Wart management for project cargo loading and offloading operation active projects, load out operations by floating crane and Roll on load outs.
• Attend JSA meeting and client RA meeting for the assigned project and report to Section Head/Lifting Superintendent/Production Manager/GMO.
• Assist Engineer in preparing yard layout drawing for module location as per construction and load out sequence by confirmed projects and assisting tender department in lifting and load out feasibility check.
• Raise purchase requisition for the project required consumable and hardware items & sub-contractor works.
• Liaise with Lifting / Rigging Superintendent on a day-to-day basis for work progress.
• Liaise with client representatives, classification society surveyors and others to comply with inspection requirements.
• Resolve any technical problems or issues faced at the work site
• Ensuring that the ground conditions are safe for any lifting operation to be performed by mobile cranes

Job Requirements:

• At least 8 years of experience as a lifting supervisor.
• Experience and knowledge in heavy lifting.
• Obtained Lifting Supervisors Safety Course and Work-At-Height Certificate

Roles:

-Interpretation and analyze of production drawings & documents.

-Implementing best fabrication / machining practices and techniques to develop and maintain efficient processes to achieve productivity, quality and safety.

-Planning of project and management of the project team to keep project on schedule and budget.

-Handle all day-to-day issues and troubleshooting problems as they arises finding efficient and effective solutions.

-Estimate costs for quotation preparation.

-Coordinate and work closely with management, customers, contractors and suppliers.

-Maintain good customer relationship.

-Perform other duties as assigned to ensure success of project and company objectives.

Requirements:

-NItec / Diploma in Mechanical / Manufacturing Engineering or related.

-At least 5 years experience in metal fabrication and machine shop activities.

-Self-motivated and result-driven mindset

-Great communication and interpersonal skills

Job Description:

• Read and interpret Structural, Piping, HVAC, mechanical electrical drawings.
• Manage a team of Superintendents, Supervisors, including work schedules, project progress and resource allocation.
• Manage & chair day to day VSCC (Vessel Safety Coordination Committee Meetings).
• Assist in providing cost estimates for labour, supplies, materials and other project costs.
• Collaborate with clients, Project Managers, other construction management to determine budget and timeline.
• Coordinate materials and equipment delivery with vendors and suppliers.
• Create schedules for workers and subcontractors.
• Work closely with commercial team and forecast Subcontractor’s requirements and assign scopes accordingly.
• Maintain a daily log for the job site’s operations, reporting to management as necessary.
• Make changes in the operation as necessary to best met construction deadlines.
• Implement management techniques that are cost-effective and efficient.
• Prepare day to day reports & update project master schedule.
• Conduct weekly internal production meetings & Weekly client – shipyard interphase meeting.
• Prepare meeting minutes and disseminate every week to all personals related to the assigned project.
• Maintain project variation order records, technical query records, Drawing transmittal records and disseminate weekly.

Job Specification

• Bachelor’s / diploma in Mechanical or equivalent
• Minimum 5 years of working experience in Rig Construction & Shipyard experience
• Must possess MWSHSSR (Manage Workplace Safety and Health Ship building and Ship Repair)
• Must possess experience of working & managing Jack up rig upgradation / repair assignments in shipyard environment
• Excellent English command, including writing, speaking and active listening
• Proficient in MS Office applications (ie. Microsoft Excel)
• Knowledge of construction budgeting best practices and assist commercial team in preparing quotes.
• Good planning skills, including execution, resource allocation and manage contingencies
• Understanding of construction equipment, including safe operating practices and signs of maintenance issues
• In-depth understanding of MOM construction regulations
• Great problem-solving and decision-making skills
• Effective leadership abilities, motivate peers, set targets / goals and conflict management
• Organizational skills, including time management, delegation, prioritization and multitasking
• Willing to work in a challenging repair environment

• Support Project team in the coordination of project activities.
• Plan, schedule and manage the project efficiently and to ensure time completion.
• Ensure optimal utilization or resources of the Company and to work in accordance to safety standard and within project budget.
• Assist in day to day requirement.
• Follow up on the project progress.
• Execute all directions from managements.
• To raise Material Requisition Form (MRF) based on costing sheet provided but not limited to save project cost as much as possible without limiting result or quality of Genset delivered
• To discuss or consult with customer on delivery, installation and project related matter
• To coordinate project related work.

We are seeking a highly skilled Service Engineer to join our dynamic team. The Service Engineer will be responsible for providing technical support and expertise to our in-house production team in Singapore and globally, and ensuring our products operate efficiently and effectively. This role requires a strong understanding of TIG automatic cladding machines, manual welding machines (E.g. Fronius Brand)

Key Responsibilities:

• Install, maintain, and repair automatic and manual welding machines and/or CNC Machining
• Diagnose mechanical, electrical, and software-related issues and propose appropriate solutions.
• Conduct preventive maintenance and calibration of equipment to ensure optimal performance.
• Resolve production technical concerns and requirements.
• Provide in-house training on the proper use and maintenance of equipment.
• Create and maintain detailed service reports and documentation.
• Work closely with the sales and engineering teams to support product development and improvement initiatives.
• Stay updated on new technologies and industry trends to provide proactive support and recommendations.

Requirements:

• Proven experience as a Service Engineer or similar role in the O&G industry
• Strong problem-solving skills and ability to think analytically.
• Excellent communication and interpersonal skills.
• Ability to work independently and collaboratively in a team environment.
• Willingness to travel frequently to Philippines and Malaysia as needed.

Location: Singapore / Philippines

Application Process:

Interested candidates should submit a resume and cover letter outlining their qualifications and interest in the position to [email protected]

Ø organize and manage the electrical department as necessary, from receiving tenders to completing final accounts.

Ø To ensure sub-contractors are supervised and their standard of work is acceptable and in compliance with recognized safety practices and specifications

Ø To control and effectively manage department operations through regular site visits as necessary, to assess progress, safety, and quality, and to give instruction and advice

Ø To liaise with departmental staff, clients, contractors, and suppliers in matters relating to work

Ø To attend meetings, training workshops, and other work-related issues, as required, which may involve working outside normal hours

Ø To liaise with specialists and consultants to obtain assistance and advice

Ø To supervise staff including allocation and control of work

Ø To prepare method statements in conjunction with the Safety officer

Ø To liaise with the Safety Officer in arranging safety inspections

Ø To check and authorize orders and invoices, ensuring correct procedures are followed

Ø To liaise with Human Resources in matters relating to development and training courses for electrical staff

Ø To attend management meetings as required

Ø To undertake specific projects and prepare reports for the Technical Director as required

Ø To adhere to existing working practices, methods, and procedures, undertake relevant training and development activities, and respond positively to new and alternative systems

Ø Undertake any additional duties as and when required by the line manager/business

Ø Ensuring adherence to all company policies & procedures.

Ø To identify system weaknesses and suggest new/efficient procedures to strengthen it

Ø Promote health and safety and ensure adherence to health and safety policies and procedures.

Ø Undertake any additional duties as and when required by the business.

Ø Ensuring adherence to all company policies & procedures.

Ø To identify system weaknesses and suggest new/efficient procedures to strengthen it

Ø Promote health and safety and ensure adherence to health and safety policies and procedures

Ø Accountable for creating a safe working environment, managing risks reducing exposure to hazards to levels practically achievable, and ensuring implementation of QHSE Policy.

Ø Complying with all IMS Procedures, and QA/QC standards as applicable to deliver work safely and maintain the highest quality standards with minimal environmental impacts.

Ø Wear appropriate safety or protective equipment as identified required through risk assessments or as specified, at all times.

Ø Contributing to enhancing quality, health, safety, and environment within the organization.

In addition to the above, all supervisors and managers have a duty of care to ensure that a safe place of work is maintained and that appropriate welfare facilities are provided. Also, to ensure that all hazardous situations and possible hazardous conditions are identified and avoided. Workers must be briefed on the hazards likely to be presented, with the knowledge that the risks have been calculated, and must be informed of the controls required to mitigate those risks.

Minimum Qualification:

Ø BE or B-Tech in Electrical Engineering

Ø Proficient in the use of MS Word, excel, outlook, and other electrical software

Minimum Experience:

Ø Proven working experience as an Electrical Engineer

Ø Excellent knowledge and understanding of both marine and land-based electrical systems, procedures, and legislation

Ø Ability to ensure that labor, materials, plant, and equipment are used effectively and efficiently

Ø Ability to organize and direct electrical and associated staff, determining priorities to maximize the use of resources in achieving prescribed objectives

Job Specific Skills:

Ø Product & business knowledge

Ø Attention to detail is essential

Ø Able to manage workload

General Skills:

Ø Good team player with good organization skills

Designing, maintaining, implementing, or improving electrical cooling products and facilities.

Performing a wide range of engineering tasks by operating computer assisted engineering software.

Conferring with customers, engineers, and others to discuss existing or potential engineering products or project.

Ensuring compliance with specifications, codes or customer requirements by directing or coordinating installation.

Writing reports and compilling data regarding existing and potential electrical engineering projects and studies.

Preparing specifications for purchase of electrical equipments and materials.

Estimating material, labour, or project costs for budget preparation.

Supervising or training project team members.

Maintaining electrical equipment.

Working with a variety of technicians

Roles:

-Interpretation and analyze of production drawings & documents. -Implementing best fabrication / machining practices and techniques to develop and maintain efficient processes to achieve productivity, quality and safety.

-Planning of project and management of the project team to keep project on schedule and budget.

-Handle all day-to-day issues and troubleshooting problems as they arises finding efficient and effective solutions.

-Estimate costs for quotation preparation.

-Coordinate and work closely with management, customers, contractors and suppliers.

-Maintain good customer relationship.

-Perform other duties as assigned to ensure success of project and company objectives.

Requirements:

-NItec / Diploma in Mechanical / Manufacturing Engineering or related.

-At least 5 years experience in metal fabrication and machine shop activities.

-Self-motivated and result-driven mindset

-Great communication and interpersonal skills

• Develop new customers while managing our existing customer base
• Pre-sales preparation (preparing project budgetary prices, quotations, costings, completion of technical specifications, delivering catalogues and engineering data to customers)
• Provide technical and engineering support to customers, whenever necessary.
• Electrical & mechanical products knowledge

Construction company requries mechanical engineer.

Construction company requries mechanical engineer.

Construction company requries mechanical engineer.

Construction company requries mechanical engineer.

Construction company requries mechanical engineer.

Construction company requries mechanical engineer.