Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

1. Lead sales and operation / project team

2. Set direction and guide the project team for all the project

3. Ensure project all is provided with support and advise all aspects of project planning, execution, monitor and control

4. Value engineering, lean engineering and selection of equipments

5. Liaising with main contractor, owner, stakeholder & consultant

6. Check and ensure the scope of work for all the fire protection system and services

7. Prepare weekly, monthly report and project budget

8. Overseeing current project as well upcoming projects

9. Attend and conducting project review and attend meeting

10. Ensure the project delivery as planned schedule and manage operational cost within the budget

11. Prepare and submit authority required documents

12. Monitor compliance of work with the workplace safety and health regulations

13. Maintain customer relationship

14. Knoweldge in AUTO CAD & Revit

14. Other ad-hoc duties as assigned by management

About the Opportunity

The IT Engineer provides support to employees experiencing technical problems and performs troubleshooting, problem diagnosis, resolution, and escalations. In-depth knowledge and hands-on experience with system and server administration and virtualization experiences are required. Area of expertise for this position includes Microsoft technologies, VMware virtualization, Citrix VDI, Linux and storage. Prior experience supporting L1 and L2 requests in IT would be helpful for this position.

Job Responsibilities:

• Primary responsibilities will include overseeing and executing system-based projects, writing scripts to automate manual processes, and creating system documentation & diagrams. Provide system administration and configuration of specialized mission applications and software.
• Strategic Infrastructure Management: Global Administration, maintenance, and support of the Server environment and VDI infrastructure, ensuring optimal performance and scalability to meet the evolving needs of the organization as the need arise.
• Incident Resolution and Technical Escalations: Act as a point of escalation for complex technical issues, leveraging your advanced troubleshooting skills to swiftly diagnose and resolve incidents, minimizing impact on business operations.
• Advanced Problem Analysis and Resolution: Conduct in-depth analysis of system problems, particularly those related to hardware, software applications, and operating system servers, employing sophisticated diagnostic techniques to implement effective solutions.
• Comprehensive Documentation and Knowledge Management: Develop and maintain comprehensive documentation, including automation scripts and procedures, to streamline troubleshooting processes, enhance team collaboration, and ensure continuity of operations.
• Root Cause Analysis and Problem Management: Lead root cause analysis efforts for critical problems and major incidents, identifying underlying issues and implementing preventive measures to mitigate future occurrences, thereby safeguarding business continuity.
• Proactive Performance Monitoring and Security Compliance: Utilize advanced monitoring tools and command-line interface utilities to continuously assess server performance, identify potential vulnerabilities, and ensure adherence to stringent security standards.
• Change Management and Risk Mitigation: Spearhead the planning, coordinating, and executing system software upgrades, patches, and firmware updates, meticulously evaluating risks and impacts to minimize disruptions and maintain system integrity.
• Effective Communication and Stakeholder Engagement: Interface with IT management, end-users, and departmental teams to communicate feedback, share insights, and champion initiatives aimed at enhancing operational excellence and delivering exceptional service quality.
• Follows SOP: Support procedures and provides troubleshooting guideline and cause analysis for technical issues

Job Requirements

• BS degree or equivalent experience.
• 8 + years of advanced experience as a IT Administrator or Engineer with hands on experience in servers, virtualization and storage.
• Active Directory (AD) & Domain Controller Administration including DNS and GPO management in a multi-site environment.
• Building and administering Windows\Linux servers and accompanying infrastructure, maintaining capacity and performance in enterprise environment.
• Candidates must possess experience with both Windows and Linux mixed environments.
• Experience with Infrastructure – virtual environment, VDi, Citrix Netscalar, Backup& Restore, disaster recovery and business continuity
• Hardware: Dell MX7000 Chassis and MX700 series blade configuration, PowerEdge rack servers
• Storage: NFS and ISCSI storage concepts. Cronjobs and rSync functionality
• Networking: TCP/IP, VLAN, DNS, Load Balancing and security concepts
• Virtualization: VMware 7 and above and Citrix Storefront
• Transferable Skills: Communication, ability to work with a diversity of people, ability to plan and organize, time management, analytical problem solving, Project Management, & customer service skills.
• Strong communication and collaboration skills
• Ability to work independently and as part of a team.
• Willingness to learn and adapt to new technologies and processes.
• Ability to multi-task in a fast-paced IT environment with fluctuating priorities and deadlines.
• Ability to interface and work with varied positions and levels of technical knowledge both within the department and with other departments in the company.

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description

• Prepare and submit MSRA prior to the commencement of work
• Liaise with SO team to clear off inspection.
• Lead the site supervisor in clearing off site inspection, and to check and ensure that the work is carried out safely as per drawing, and is of good quality.
• Coordinate with subcontractor to resolve the issues and to ensure that the work is carried out as per approved MSRA & design, and to meet the schedules.
• Check and ensure all the temporary work is carried out as per PE design.

Requirements

• Degree in Civil, Mechanical or Electrical, or a related field.
• Min 2 to 3 Years Relevant Work Experience (MEICA)
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Key Responsibilities:

• Design and develop electrical systems, components, and wiring diagrams.
• Design and oversee the electronics hardware design activities of the whole product.
• Select electrical/electronics components for new product development, and replacement for existing products as well.
• Conduct electrical testing and troubleshoot systems to ensure functionality.
• Collaborate with cross-functional teams (e.g., mechanical) on product development.
• Liaise with supplier and operation for design improvement.
• Provide technical support of products introduced into both the domestic and international markets.
• Work closely with a multidisciplinary team to drive cost optimization, manufacturability, quality and reliability.
• Provide technical support during installation, commissioning, and maintenance of systems.

Requirements:

• Bachelor’s degree in electrical engineering or related field.
• Proficient in electrical design software tools
• Strong knowledge of electrical systems, power distribution, control systems, and circuit design.
• Strong problem-solving skills and attention to detail.
• Hands-on experience with hardware testing, troubleshooting, and equipment commissioning.
• Experience in microcontroller platform hardware design is a plus
• Knowledge of HVAC systems is a plus.

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Diploma in Electrical Engineering or equivalent
• Good interpersonal and communication skills

Job Description:

• Lead metal Additive Manufacturing process, materials and application development and service projects, including material selection, part design, parameterization, prototyping and manufacturing of AM parts
• Scoping, managing, and executing of customer projects within budget and schedule, ensure deliverables, objectives and customer requirements are met
• Provide technical consultation and support to customer enquiries relating to metal AM application
• Operation of metal AM machines and auxiliary equipment, including maintenance, troubleshooting, risk assessment, and managing of AM lab
• Documentation of project reports, engineering reports, technical data, process know-hows; development of SOPs and best practices for AM equipment and processes
• Support market promotion and customer engagement; participate in local or overseas industry exhibitions, tradeshows, conferences, and seminars; facilitate lab tours, demos and presentations
• Provide technical content to support creation of marketing collaterals such as demo parts, product videos, whitepaper, etc.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers
• New hire is required to undergo specific tests for who are exposed to certain occupational hazards.

Requirements:

• Bachelor's Degree / Master / PHD in Engineering, Mechanical, Materials, Aerospace or equivalent
• Min 5 years of working experience with metal Additive Manufacturing process and application development
• Hands-on experience with LMD/DED machine operation
• Proficient in data preparation, CAD/CAM and toolpath generation for LMD/DED process
• Strong understanding of LMD/DED process, materials, and key process variables
• Experience with parameters development, material characterization, or process simulation
• Familiar with metal AM process chain
• Keen on hands-on work
• Fast learner and agile, able to adapt to dynamic work environment
• Able to work independently and self-motivated

The Field Service Engineer is responsible for providing technical expertise and support at customer sites within the maritime industry. This role involves installing, maintaining, troubleshooting, and repairing equipment and systems to ensure optimal performance and customer satisfaction.

Key Responsibilities:

Installation & Commissioning

· Perform installation, setup, and commissioning of maritime equipment and systems onboard vessels or at customer facilities.

· Conduct functional testing and calibration to ensure systems meet operational requirements.

Maintenance & Troubleshooting

· Diagnose and resolve technical issues on mechanical, electrical, and control systems.

· Conduct scheduled and preventive maintenance to minimize equipment downtime.

· Prepare detailed service reports and recommend corrective actions.

Customer Support

· Provide technical advice and training to customers to ensure proper system operation.

· Act as the primary point of contact for technical support during and after project completion.

Compliance & Documentation

· Ensure all work complies with industry standards, safety regulations, and company policies.

· Maintain accurate service records, inspection reports, and parts inventory.

Collaboration

· Liaise with internal teams (sales, engineering, and procurement) to ensure seamless service delivery.

· Provide feedback to improve product design, reliability, and customer experience.

The Lead Project Engineer is responsible for achieving project objectives within the defined time and cost framework while ensuring full delivery scope and quality. This role involves comprehensive project management, technical verification, and stakeholder communication to ensure customer satisfaction and successful project execution.

Key Responsibilities:

Project Objectives & Delivery

• Achieve project objectives within the defined time and cost framework.
• Ensure the delivery scope and quality meet the desired standards.

Customer & Stakeholder Liaison

• Liaise with the Customer, End User, and/or appointed Engineering Contractor.
• Ensure technical compliance with specifications.
• Technically verify customer requirements for order processing.

Project Management & Execution

• Manage projects within budget and on schedule until customer acceptance and hand-over.
• Oversee tender evaluation and provide Project Management support.
• Source third-party components and manage subcontractors.

Documentation & Data Management

• Manage documentation required by the project.

Team Leadership

• Lead and mentor other project team members when necessary.

Progress Reporting

• Report regularly to the Project Department Manager on project progress.

Responsibilities:

• Plan, design and supervise C&S engineering works (e.g. buildings, roads, drains, sewers, earthworks, underground buildings, temporary structures).
• Perform analysis and design for the project.
• Supervise the drafting of drawings related to design.
• Ensure all engineering works comply with relevant statutory standards, regulations and Codes of Practice.
• Manage project stakeholders, clients, design team, site team and other relevant parties.
• Coordinate with contractors, project team and design consultants.

Requirements:

• Possess a Civil and Structural Engineering degree recognized by the Professional Engineers Board of Singapore.
• Prior working experiences in structural engineering projects preferred.
• Familiar with structural engineering design to local Codes, Regulations and requirements,and Eurocode.
• Well verse in structural design software, e.g. ETABS, STAAD Pro, SAFE, SAP 2000, MIDAS, etc.
• Familiar with authority submission requirements for civil-structural works.
• Experience in design/project management works in BIM.
• Conversant with statutory code and requirements for site supervision, quality control procedure and construction administration.

The ASRS Operation Engineer is responsible for the maintenance, repair, and operation of Automated Storage and Retrieval Systems (ASRS) equipment to ensure optimal performance and uptime. This role involves performing preventive maintenance, diagnosing, and resolving technical issues, and supporting system upgrades and modifications to meet operational requirements. Taking up the role of Team leader of the shift.

Responsibilities:

• Operate ASRS equipment, including automated cranes, conveyors, and control systems, to perform material handling tasks such as loading, unloading, and storing goods in designated locations.
• Follow maintenance schedules and perform routine inspections and preventive maintenance tasks on ASRS equipment.
• Diagnose and troubleshoot mechanical, electrical, and software issues affecting ASRS equipment performance, using diagnostic tools, schematics, and technical manuals.
• Conduct repairs and replacements of defective components or parts, such as motors, sensors, actuators, bearings, and PLC modules, to restore equipment functionality.
• Coordinate with equipment vendors or service providers for technical support, spare parts procurement, and warranty/contract repairs as needed.
• Assist Maintenance Team in implement software updates, firmware upgrades, and system modifications to enhance ASRS performance, reliability, and safety.
• Monitor system operation through computerized interfaces or control panels, and respond promptly to alarms, error messages, or abnormal conditions.
• Ensure smooth operation with the aid of warehouse control system (WCS) and Humane Machine Interface (HMI).
• Ensure compliance with safety regulations and company policies by following proper lockout/tagout procedures, wearing appropriate personal protective equipment (PPE), and adhering to safety protocols during maintenance activities.
• Document maintenance activities, repair logs, equipment histories, and spare parts inventory using computerized maintenance management systems (CMMS) or other digital record-keeping tools.
• Provide training and technical support to operators and maintenance personnel on ASRS operation, troubleshooting techniques, and safety procedures.
• Participate in cross-functional teams for system upgrades, capacity expansion projects, or process improvements related to ASRS operations.
• Shift schedule planning, arrangement, and execution.
• Managing inventory accuracy, stock replenishment, and space utilization within the warehouse or distribution center environment. This role involves coordinating with various teams to ensure timely inventory transactions, cycle counts, and adjustments to maintain optimal inventory levels.

Qualifications:

• High school diploma or equivalent; technical diploma or certification in mechatronics, automation, or related field preferred.
• Proven experience in maintenance and repair of automated material handling systems, such as ASRS, conveyor systems, robotics, or similar equipment.
• Strong mechanical aptitude with knowledge of electrical, electronic, and hydraulic systems.
• Familiarity with PLC programming, HMI interfaces, and industrial control systems (e.g., Siemens, Allen-Bradley) is desirable.
• Ability to read and interpret technical drawings, electrical schematics, and equipment manuals.
• Excellent problem-solving skills and attention to detail in diagnosing complex technical issues.
• Effective communication skills and ability to work independently or as part of a team.
• Willingness to work flexible hours, including weekends or evenings, and respond to emergency calls as needed.

♦ Close supervision, Management and execution of construction works at site, including monitoring work progress and quality

♦ Manage, vendors, contractors and Sub Con for progression of work

♦ Responsible for all the site implementation and completion towards management target, client’s expectation and compliance to authorities' regulations.

♦ Responsible for the project quality and safety plan.

♦ Liaise with consultant and contractor for Green Mark certification processes

♦ Ensure company ISO and OHSAS requirements are fully implemented on project.

♦ Coordinating with authorities, clients, consultants and subcontractors on all project aspects.

♦ Work closely with Engineering team on any technical issues arising from site and lead the supervision and resolution of work onsite

♦ Ensure proper documentation and records of site works are carried out

1，Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Environmental/Health/Safety) or equivalent.

2. At least 3 year relevant experience construction.

3，Required skill(s): MS Office, AutoCad.

4，Preferably Senior Executives specializing in Engineering - Civil/Construction/Structural or equivalent.,

5，Independent, proactive positive work attitude

*We regret that only shortlisted candidates will be notified.

io-consultants is looking to expand its activities in Asia and is searching for Senior Consultants / Principal Consultants for projects to be based in Singapore. The candidate must be a team player, full of drive, articulate, creative and have a can-do attitude.

Responsibilities:

• Industrial engineering and automation consultancy services

• Understanding Clients’ requirements, perform data gathering, data analysis

• Research and develop new processes, operations and logistics concepts and ideas

• Work with Clients on Production and/or Logistics process re-engineering and design

• Perform process and equipment layout design work

• Prepare Systems & Equipment budget, specification, evaluation and selection

• Work with Systems & Equipment Suppliers and other Consultants in project implementation

• Manage given projects within agreed budget and schedules

• Project administration and reporting

• Lead, guide, train and motivate younger consultants

Requirements:

• Good recognised degree in Engineering. Graduate Degree would be a plus

• Good working knowledge in MS-Office (Word, Excel and PowerPoint)

• Very good spoken and written English, communications and presentation skills. Have a lot of self-confidence

• 10 or more years’ working experience, preferably in the any of the following industries: Food & Catering, Healthcare, Pharmaceutical, Logistics and Facility Planning. Consulting experience would be a plus.

• Ability to work in team and/or independently

• Able to travel for short assignments

• Must have initiative and self-learning

• Ability to lead projects and produce quality results

Remuneration:

• Can be discussed, depending on experience, know-how and ability to contribute

• Range (dependent on experience and qualifications): $10,000 - 14,000

• Reports to the Design Manager
• Review/Develop design drawings and documents in accordance with project requirements
• Coordinate all design related matters and participate in regular/ad-hoc meetings with Clients / Design consultants / Viaduct specialists / Subcontractor
• Monitor and update design schedule regularly
• Prepare & review shop/fabrication drawings for temporary/viaduct structure
• Support Design manager & lead in-house design engineer/drafter

Job Requirements

• Minimum Degree in Civil Engineering or equivalent
• Minimum 3 years of relevant experience of design & construction of bridge/ viaducts/ roads/ highways
• Candidate with experience in LTA (Road/MRT/Viaduct) is preferred
• Technical expertise and knowledge of concrete material & structure design
• Proficient in proposal for structural systems
• Proficient in AutoCAD
• Proficient in Structural Analysis Software (MIDAS, SAP, STAAD etc.)
• Good attitude towards work and timeline
• Independent, analytical and good interpersonal skills
• Location : Woodlands
• Project : Viaducts

The Field Service Engineer is responsible for providing technical expertise and support at customer sites. This role involves installing, maintaining, troubleshooting, and repairing equipment and systems to ensure optimal performance and customer satisfaction.

Key Responsibilities:

Installation & Commissioning

· Perform installation, setup, and commissioning of maritime equipment and systems onboard vessels or at customer facilities.

· Conduct functional testing and calibration to ensure systems meet operational requirements.

Maintenance & Troubleshooting

· Diagnose and resolve technical issues on mechanical, electrical, and control systems.

· Conduct scheduled and preventive maintenance to minimize equipment downtime.

· Prepare detailed service reports and recommend corrective actions.

Customer Support

· Provide technical advice and training to customers to ensure proper system operation.

· Act as the primary point of contact for technical support during and after project completion.

Compliance & Documentation

· Ensure all work complies with industry standards, safety regulations, and company policies.

· Maintain accurate service records, inspection reports, and parts inventory.

Collaboration

· Liaise with internal teams (sales, engineering, and procurement) to ensure seamless service delivery.

· Provide feedback to improve product design, reliability, and customer experience.

Department: R&D

Report to: R&D Director

Xnergy is a multi-VC funded and Sovereign-backed power solutions Pre-IPO company, the first in the world in high power universal contactless charging for global electrified mobility. Xnergy was voted a APAC 25 company in 2020 by Cleantech Group.

* The APAC 25 is an annual list of private sustainable innovation companies that have gained the attention of market experts. The 25 companies are regarded as having the potential to make a significant impact in a five-to-ten-year time frame.

Xnergy has a subsidiary company in Suzhou and an office in Boston and Munich. For more information, please visit Xnergy website: www.xnergytech.com.

Description

We are looking for a senior Firmware Engineer with experience in power electronics to join us in Singapore, with opportunities to travel overseas.

In this role, you will be responsible for the design, development and testing of the firmware and embedded control algorithm for Xnergy wireless power and power conversion products. This includes various stages in a product’s life cycle such as concept/ architecture, prototyping, evaluation, production ready firmware, manufacturing, and maintenance.

You will work closely with the R&D team (hardware, firmware, and software engineers) to contribute to power converter design and shape the development of our future product strategies.

You are expected to provide theoretical knowledge and hands on skill in power electronics control and algorithm, firmware architecture, microcontrollers, power management strategies.

Essential Functions/Responsibilities

1. Design and implement control algorithms and embedded firmware for high-power converters based on DSP/MCU using C/C++ programming language and model-based design methodology in line with the applied normative and standards practice.
2. Apply knowledge of CAN, SPI, USB, I2C, RS485, RS232 communication protocols to product development.
3. Plan and execute testing strategy including bench testing, validation testing, unit testing, integration testing, and system level testing.
4. Develop lab test tools, and support development of routine testing methods/systems for production systems.
5. Produce clear documentation for firmware design and test results.
6. Support identification and troubleshooting of discovered field issues, customisation requirements, create solutions, and disseminate knowledge.
7. Contribute to all phases of the firmware development life cycle including requirements analysis, architecture, design, implementation, testing, and release to ensure high quality production code.
8. Work closely with R&D team, field applications, and production teams for specifications, design, prototyping, and fabrication locally and remotely.
9. Contribute in selecting microcontrollers, schematics review, power management strategy, testing, debugging, and troubleshooting of power, digital, and analog circuit.
10. Finding root-cause and solve technical issues during new product development and product improvement as well as in field escalations.
11. Provide technical guidance and support to the software team.
12. Contribute in related technology roadmaps, features development, next generation product.
13. Plan and schedule to meet goals, deliverables, and deadlines.
14. Mentor junior engineers with an emphasis on controls.

Requirements

1. Bachelor’s/Master’s/PhD degree in Electrical/Electronic/Power Electronics Engineering or Computer Science or other related field.
2. Possess minimum 3 years of relevant work experience.
3. Good understanding and strong interests in power electronics, control and stability, topologies (e.g., AC/DC, PFC, DC/DC, DC/AC, LLC and resonant converter), analog/digital circuit.
4. Solid experience with embedded software development, firmware design, real time control and implementation in microcontrollers, DSPs.
5. Good programming skills (C/C++/assembly, python) and familiar with various development platform (microcontrollers, Linux, etc.) and development tools (compilers and debuggers).
6. Strong knowledge in various industrial communication protocol and the implementation (UART, USB, SPI, I2C, RS-485, CAN, CAN-FD, ISO-15118, IEC 61851).
7. Strong practical knowledge on schematics, engineering specs, testing, troubleshooting, debugging, including familiarity with equipment (oscilloscopes, multi-meters, power supplies, etc.).
8. Familiar with good development practices including design and code reviews, testing and regression, revision control, release, and user documentation.
9. Experience with Agile development methods such as Kanban or Scrum.
10. Self-driven, proactive, assertive, organised, disciplined, and able to work in a collaborative, fast-paced, team environment.
11. Good interpersonal skills, analytical skills, written and verbal communication skills in English and Chinese language.
12. Able to work in start-up environment with global, cross-cultural, and cross-functional engagements.

Job Description

Bring more to life.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At Leica Microsystems, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

Shape the Future with Us!

At Leica Microsystems, we have been shaping the future for over 175 years with groundbreaking optical and digital solutions. With a culture rooted in customer focus, innovation, and teamwork, we lead the market in microscopy, imaging, and analysis, unveiling the invisible and empowering our customers to build a better, healthier world.

Joining Leica Microsystems means contributing to scientific discoveries and supporting surgeons in making critical decisions. Our advanced microscopes and AI-based image analysis solutions enable users to gain profound insights into development and engineering challenges. Here, you will work on meaningful projects alongside passionate colleagues, driving progress and pushing the boundaries of what’s possible.

Learn about the Danaher Business System which makes everything possible.

The Senior Quality Engineer, PQE is responsible to ensure the quality of both medical and non-medical products through rigorous inspections, implementation of quality control measures, and identification of areas for improvement. You will address production quality issues, collaborate with cross-functional teams to find root causes, and drive continuous improvement to build high-quality products that exceed customer expectations. The ideal candidate will possess a strong background in engineering or quality assurance, attention to detail, a proactive mindset, and preferably experience in people management.

This position reports to the Senior Manager Quality Assurance and is part of the Production Quality Engineering (PQE) team located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Address production quality issues by identifying problems and collaborating with cross-functional teams to develop solutions for overall product quality improvement.
• Utilize statistical tools to identify trends and patterns for enhancing the production process and ensuring quality.
• Investigate and correct root causes of product failures occurring in the field.
• Conduct periodic production audits to ensure compliance with established policies, procedures, and control plans.
• Participate in lean and continuous improvement initiatives, while adhering to company EHS requirements to prevent injuries and maintain safety.

The essential requirements of the job include:

• Bachelor's degree in Mechatronics, Mechanical Engineering, or Electronics.
• At least 5 years of relevant experience in biomedical or medical device manufacturing.
• Proficient in statistical control methods and QMS 9001; familiarity with ISO13485, USFDA QSR/cGMP, and ISO14971 for medical devices is advantageous.
• Computer literate in MS Office and Lotus Notes.
• Strong analytical, problem-solving skills, and knowledge of lean and investigation tools such as 8D and fishbone diagrams, with a solid understanding of engineering principles, theories, and concepts.

Leica Microsystems, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job.

Responsibilities:

• Develops and maintains systems using Java, Spring Boot, Angular, Oracle SQL, Power Automate, Power Apps, and Power BI.
• Provides technical support to users.
• Troubleshoots and resolves system issues.
• Participates in business analysis and technical design sessions.
• Ensures compliance with industry regulations.
• Documents system processes and presents progress reports.
• Collaborates with team members and other departments to ensure smooth operations.
• Manages projects as assigned.
• Coaches and mentors team members (for senior positions).

Requirements:

• Minimum of a Bachelor's degree in Computer Science, Information Technology, or a related field (advanced degrees preferred).
• Possesses at least 5 years of experience in system development and support.
• Demonstrates strong technical skills in Java, Spring Boot, Angular, Oracle SQL, Power Automate, Power Apps, and Power BI.
• Exhibits excellent analytical and problem-solving abilities.
• Displays strong communication and interpersonal skills.
• Capable of managing multiple projects and deliverables simultaneously.
• Experienced in one or more full Software Development Life Cycles (SDLCs) for enterprise projects.
• Knowledge of SAP Crystal Reports and Jasper Reports is an added advantage.

Our Addresses and Working Hours:

Seatrium - Pioneer Yard

50 Gul Road, Singapore 629353

(Islandwide transport provided)

Mon – Thurs: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• Reports to the Construction Manager
• To ensure that day to day viaducts erection activities/operations are monitored at an appropriate level
• Plan, organize, supervise, and liaise closely with sub-contractors and operation teams on all ongoing viaduct erection activities
• Perform routine on-site checks and inspections to ensure compliance with authorities’ requirements.
• Liaise with various stakeholders on the safety aspect of any viaduct erection operations
• Generate reports to construction team regularly
• Liaise closely with WSH team to ensure operations comply with safety standards

Job Requirements:

• Degree in Civil Engineering or equivalent
• Minimum of 10 years of relevant experience in the construction industry; inclusive of 5 years experience in construction and supervision for vehicular structures and road projects (Road / LRT / MRT / Viaduct) is mandatory
• Technically expert and highly knowledgeable in the erection of viaduct segments is essential for this position
• Location : Woodlands
• Project : Viaducts

♦ Close supervision, Management and execution of construction works at site, including monitoring work progress and quality

♦ Manage, vendors, contractors and Sub Con for progression of work

♦ Responsible for all the site implementation and completion towards management target, client’s expectation and compliance to authorities' regulations.

♦ Responsible for the project quality and safety plan.

♦ Liaise with consultant and contractor for Green Mark certification processes

♦ Ensure company ISO and OHSAS requirements are fully implemented on project.

♦ Coordinating with authorities, clients, consultants and subcontractors on all project aspects.

♦ Work closely with Engineering team on any technical issues arising from site and lead the supervision and resolution of work onsite

♦ Ensure proper documentation and records of site works are carried out

1，Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Environmental/Health/Safety) or equivalent.

2. At least 3 year relevant experience construction.

3，Required skill(s): MS Office, AutoCad.

4，Preferably Senior Executives specializing in Engineering - Civil/Construction/Structural or equivalent.,

5，Independent, proactive positive work attitude

*We regret that only shortlisted candidates will be notified.

Roles & Responsibilities

• Attend to Client’s site surveys, meetings and maintain constant contact/communication regarding project works (In progress and new)
• Work closely with the drafting department to come out with preliminary design (for client’s approval), material take off and cost estimation for the new potential projects
• Carry out cost estimation and prepare quotation for clients
• Procurement of materials and consumables required to carry out the fabrication work
• Work closely with clients during project execution with regards to schedule, determination of hold points (for testing and inspection) and project close up
• Overall in charge of project’s delivery schedule, cost control, quality and safety (i.e. ensure that projects are carried out within budget, schedule and with zero rework and safety incident)
• Carry out daily meeting with the supervisors to plan, prioritize, review and update status of projects
• Prepare Risk Assessment for Clients review and approval prior to work start
• Update project status during the project weekly meeting
• Check and ensure proper documentation (such as test packages, as-built drawings etc) are in place prior to project close up
• Ensure D.Os, Job Completion forms and invoices are in place (signed, submitted and filed promptly) within 1 week of project close up
• Maintain accountability to the individual client site based on sales records, quality control and safety records
• Ensure overall safety well being of workers in the workshop as well as the on site during project execution
• Carry out at least one Monthly safety Audit using the Audit Checklist
• Attend and participate all Safety Meetings organized by Clients

Education & Work experience Requirements:

1. At least Bachelor's degree in Automation, Control Engineering, Internet of Things (IoT), or related fields.

2. At least 3 years of relevant work experience in the structural steel industry.

Job Description:

1. Develop and optimize automation solutions based on production requirements, and coordinate with teams to deploy automated inventory management systems.

2. Design and improve automated steel structure production processes, integrating industry-standard software (e.g., Tekla) with processing equipment to achieve automated cutting, assembly, and welding.

3. Maintain existing production lines and propose improvements to minimize manual intervention and increase efficiency.

4. Collaborate with teams to ensure seamless integration of automated systems with existing production management systems, and provide training and guidance on new equipment and systems.

5. Generating reports outlining new automation ideas, machine and software upkeep best practices, test results.

Key Skill & Competency Requirements:

1. Proficiency in sensor principles and applications, with the ability to design and optimize sensor-based monitoring and control systems.

2. Proficiency in embedded systems design, including embedded hardware development, microcontroller programming (e.g., ARM, STM32), and real-time operating systems (RTOS).

3. Familiar with C# programming.

4. Familiar with mainstream automation development tools and software, such as LabVIEW, MATLAB/Simulink, Siemens TIA Portal, and AVEVA System Platform.

5. Familiar with industrial automation technologies, including PLC programming, servo control, and industrial robotics.

6. Familiar with smart manufacturing technologies (e.g., Industry 4.0, MES systems, IoT devices) and their applications in steel structure manufacturing.

Automation Project Engineer

(for a European MNC in automation solution in logistic, supply chain, construction)

Key Roles and Responsibilities

• Report and assist Project Manager (PM) on project functions included but not limited to project management, site management, risk control management etc. to meet the project(s) goals.
• Assist Project Manager in project planning, implementation and to coordinate all construction works on the project site are in accordance to the master and detailed work program.
• Prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.
• Manage day to day project activities including scheduling, coordinating and monitoring and reporting update of projects
• To supervise the execution of the works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract document
• To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc. on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Liaise with client or consultant for site inspections, submission of necessary technical reports and ensure necessary records are maintained at site. Assist in verifying progress payments and claims from Contractors.
• Attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule
• Establish proper and effective document control system, maintain & conduct reviews of detail design drawings, project documents and specifications.

Qualifications & Experience

• Diploma or Bachelor’s Degree in Electrical Engineering/Electronics/Control Systems Engineering or related disciplines

Preferred Skills & Characteristics

• Self-starter and ability to self-manage strong interpersonal and leadership skills
• Must have high level of integrity, able to generate trust and build alliances with co-workers
• Familiar with Job Safety Analysis, Work Method Statement and Permit to Work application requirements and procedures
• Ability to maintain good project documentation and is familiar with ISO documentation requirements

If you are keen to apply for this role, please click auto-apply

HRLinked Asia Search & Consultancy Pte Ltd (Registration No: 201910702W)

About Mun Siong Engineering Limited

One of Singapore’s leading integrated service providers since 1969, Mun Siong Engineering Limited offers a range of mechanical and electrical & instrumentation services for oil & gas, petrochemical, energy, chemicals, and power industries. As a one-stop solution provider, the Mun Siong Group caters for engineering, procurement, fabrication, construction, maintenance of plants and equipment, and specialised products and service solutions.

Job Description

Electrical Instrument Engineers are responsible for designing, configuring, and overseeing automated systems and power distribution projects, focusing on enhancing productivity, reliability, safety, and optimization in industrial facilities, from warehouses to complex EPC contracts, while managing contractors and ensuring system stability.

Responsibilities

• Serve as a knowledge resource for instrumentation, control systems, and process automation.
• Develop and maintain project documentation, including P&IDs, Instrument Index, and I/O Lists, across all project phases.
• Prepare and review engineering calculations, specifications, and requisition packages for inquiry and purchase, ensuring compliance with client standards and project requirements.
• Provide technical direction for material selection, vendor compliance, and equipment specifications; perform technical bid evaluations and make purchase recommendations.
• Coordinate with process engineers, mechanical equipment vendors, and external workshare offices to ensure compliance with project requirements and schedules.
• Plan, design, and oversee the construction, installation, and maintenance of electrical and instrumentation systems, ensuring compliance with codes, standards, and safety requirements.
• Prepare technical and construction scope of work documents for instrumentation, control systems, and electrical systems.
• Conduct inspections, testing, and vendor data reviews to ensure specifications and operational standards are met.
• Utilize computer-assisted engineering and design software to perform tasks and develop deliverables.
• Develop TIC cost estimates, effort-hour estimates, and budgets for labor, materials, and construction costs.
• Oversee project execution, ensuring timely completion within budget while maintaining quality and safety standards.
• Investigate customer complaints and recommend corrective measures; conduct field surveys to identify and resolve system issues.
• Supervise and train project team members as necessary.
• Prepare technical reports, system studies, and budgets for new projects, capital programs, and major repairs

Requirements & Professional Skills

• Diploma/Degree in Electrical Engineering
• Able to read and understand circuit diagrams as well as to detect discrepancies for combined services
• Well-versed in all local and international codes and standards on the related field
• Good knowledge in building M&E services, with project site experience in fire protection and electrical systems for M&E specifications, installation and maintenance.
• Positive attitudes/Drive for result.
• Mature personality and able to work independently.
• Good interpersonal, management and decision-making skills.