Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

You will be joining a global tech giant. This role focuses on providing technical troubleshooting support to leading app publishers in Greater China through multiple channels (WeChat, Email). You will assist Account Managers in addressing technical inquiries and gain expertise in mobile app monetization, specifically with ad products like AdMob and Firebase.

Responsibilities:

• Build expertise around mobile app ad monetization products and implementations (Android, iOS, Unity)
• Troubleshoot Technical issues from App Developers
• Assist Sales Team on Product and Technical related questions

Mandatory Skills/Qualifications:

• Bachelor's degree in Computer Science or related technical field or equivalent practical experience.
• 5+ years experience Mobile Development Skills (iOS/Android/Unity)
• 5+ years experience of Technical Troubleshooting Experience
• Ability to collaborate with engineers and translate technical concepts to non-technical audiences (and vice versa).
• Ability to speak and write in Mandarin and English fluently and idiomatically

Preferred Skills/Qualifications:

• Experience with Firebase (Analytics, Remote Config, A/B Test)
• Experience in Ad Tech Industry

• 5+ years of experience with IT networking and IT systems in Data Center and virtualization technologies (UCS, VMware ESXi, vSphere, vSAN, vCenter, Windows Server, Linux Server).
• Hands-on experience in troubleshooting, and maintaining Aruba Wireless Conductor and Wireless Controller and Access Points, Identity Service Engine, Palo Alto firewalls, and network monitoring and management tools
• Experience with AVLP (Audio-Video, Lightings and Projections) equipment maintenance
• Proficient in managing common network services (SNMP,Syslog, DNS, NTP, DHCP, AD, etc).
• Analyze network performance with tools like Wireshark and provide root cause analysis, recommendations, guidance, and expertise in maintaining the highest level of performance.
• Proven ability to perform complex troubleshooting, backup, archiving, and recovery
• Strong documentation skills

Coordination of structural works during construction process

Attending site meeting with contractor and other consultants.

Attending site issues, timely replies to RFI, coordinating VO (if any), material costing and estimation

Liaise closely with internal and external parties as well as the authorities to resolve structure design discrepancies and construction issues

Attending technical and project coordination meeting with various disciplines.

Manage and resolve production, quality, design & engineering and schedule issue

Plan, design and supervise C&S Engineering works on HDB Projects, ensure all engineering works comply with relevant statutory standards, regulations and Codes of PracticeCoordination of structural works during construction process

Responsibilities

• Diagnose and solve technical problems on semiconductor machinery and systems, such as computer setups, advanced software, or networked/wireless systems.
• Carry out on-site installations, continuous improvement initiatives, parts overhauls, preventative maintenance, equipment modifications, and repair work.
• Act as the main point of contact between the company and the customer for both administrative and technical matters related to assigned projects.
• Organize logistics and coordinate with customers on equipment-related issues.
• Address customer complaints, offering timely solutions to resolve their issues.
• Track product performance, providing regular updates and feedback on customer service requests.
• Report recurring customer concerns to management to help prevent future issues.

Requirements:

• Minimum of 2 years of related experience in Semiconductor Industry
• Possess at least a Diploma/Degree in Electrical or Electronic Engineering
• Good time management skills, ability to meet deadlines, and strong attention to detail
• Good team player with the ability to work independently

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXV54V53

Job Overview:

The Assistant Project Engineer will report directly to the Project Manager and manage ACMV (Air-Conditioning and Mechanical Ventilation) works within the built environment. The role involves ensuring that all project activities comply with engineering and contractual requirements. This position requires collaboration with the design department to meet engineering and safety standards, while overseeing contracts, costs, schedules, and overall project completion.

Key Responsibilities:

• Assist in managing the overall project from concept to completion, including support in planning, scheduling, budgeting, and coordinating with stakeholders, while following the Project Quality Plan, Safety Management Plan, and Building Execution Plan.
• Support the development and maintenance of the BIM model, ensuring it is accurate and up-to-date.
• Assist in the preparation and management of project documentation, including drawings, specifications, and reports.
• Collaborate with the client to help meet their requirements under the guidance of the Project Engineer
• Assist in verifying changes to project scope, schedule, or budget, ensuring compliance.
• Help in resolving technical or contractual issues that arise during the project, with the support of the senior team.
• Provide assistance in managing the construction process to ensure it progresses on time, within budget, and meets quality standards.
• Support monitoring the performance of contractors, ensuring they meet their obligations.
• Coordinate with various consultants and contractors, under the guidance of the Project Engineer.
• Assist in the handover process of the project to the client.
• Comply with all relevant Singapore regulations and standards under the supervision of senior project staff.
• Promote safety management activities and assist in compliance inspections.
• Assist in obtaining necessary permits and approvals.
• Support sustainability efforts and ensure the project adheres to environmental standards.
• Help minimize disruption to the public during construction by coordinating with authorities.

Requirements:

• Diploma or Degree in Mechanical Engineering, Building Services, Project Management, or a related field. ACMV project experience is preferred.
• Bizsafe Level 2 safety certification or higher preferred.
• A minimum of 1 year of experience in a related field is preferred, though fresh graduates are welcome to apply.
• Strong independence and leadership skills in a team environment.
• Knowledge of BIM are advantageous.

Advantages & Benefits:

• 5-day work week.
• Training provided for skillset conversion to BIM management, with fast progression upon BIM accreditation.
• Career development focused on progression and growth.
• AWS included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.

Responsibilities:

• Develop and execute API/UI/Functional tests with CI/CD.
• Design, develop and maintain automated test framework, tools and test cases
• Work in a scrum team of software developers and domain experts. Accountable for quality of the software product under development.
• Perform manual testing when necessary.
• Software release following SGLC guidelines. Collaborate with peers to identify opportunities for process improvement.
• Participate in design and code reviews
• Learn, grow and have fun with highly capable engineers and scientists from various disciplines in a global R&D team

All listed tasks and responsibilities are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional tasks and responsibilities.

Who we are looking for:

• Strong understanding in automated testing using at least one programming language, such as Python, Java, C#, TypeScript or JavaScript
• Strong understanding in Linux Shell scripting or equivalent command line tools
• Knowledgeable with software test methodologies such as API, Web, GUI, performance testing, with hands-on experience in frameworks and tools such as Karate, Cucumber, Gherkin and Playwright
• Strong analytical capabilities and able to troubleshoot complex issues
• Good knowledge with CI/CD tools such as Jenkins, TeamCity, GitHub Actions
• Strong understanding in databases such as MySQL or PostgreSQL, cloud computing such as Amazon Web Services and Docker/Kubernetes is a plus
• Solid understanding of SDLC processes
• Be curious, detail oriented, and analytical, with a proven ability to learn quickly
• Proactive and team-oriented with strong collaboration skills; comfortable working across functions and time zones

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional tasks and responsibilities.

Preferred Experience/Education:

• Typically requires a minimum of 0 - 2 years of related experience with a Bachelor’s degree
• Experience in biotech and bioinformatics is a plus

• Serving as the first point of contact for Client end users seeking technical assistance over phone, email, MS team and ticketing system and updating all cases reported into the Client ticketing system.
• To configure, install, support, and maintain IT hardware and software – PCs, laptops, and mobile devices, printer/copiers. Windows operating systems, applications software.
• To support Meeting Room Tablet, Projector, Telephone, Cabling and Audio Video (AV) System.
• Record events and problems and resolutions in Client ticketing system.
• Coordinate with Client IT Department to plan and implement software upgrade and OS installation or hardware tech refresh on PCs, laptop, and mobile devices.
• Day to day management of the helpdesk – dealing with cases from inception to competition
• Required to monitor and update Client IT Asset Management System
• Required to attend Client end-users within Client premises.
• Client IT Environment require support is inclusive of: -
  • Install and troubleshoot Windows & No Windows Applications
  • Account Administration
  • End User Support
  • Setup / Troubleshoot Laptop / Desktop / Printing / Meeting Room facilities /Video Conference System
  • Multi-purpose hall Sound System
  • PC inventories & Bi-monthly stock take
  • Skype / MS Team Voice
  • Software Management: Endpoint Central / Intune
  • Microsoft Defender
  • VPN Solution
  • In-house escalation to Level 2/3 Support. Hardware Tech Refresh – Windows 11 Migration, Autopilot implementation

Job Summary

Our client is seeking a Network Engineer(s) to enhance and maintain the network performance service level to ensure the smooth business operations within the organization.

You will be responsible to handle the incident response & investigation, working with vendors and the respective teams to efficiently resolve issues within the agreed Service Level Agreement (SLA).

Mandatory Skill-set

• Diploma or Degree in Computer Science, Engineering, Electronics or Information Technology;
• At least 5 years of working experience in managing IT system network operations and support (24x7), service recovery, problem management, risk mitigation and impact assessment;
• Proven track record with over 5 years of hands-on experience in successfully implementing IT infrastructure projects for LAN and WAN environments;
• Proficient in installing and configuring a wide range of network technologies, including LAN, WAN, VoIP, WiFi, wireless controllers, access points, firewalls, security gateways, VPNs, 802.1x protocol, VLANs, and L2/3 switches;
• Skilled in using monitoring, network diagnostic, and network analytics tools to ensure optimal network performance and troubleshoot issues efficiently;
• Experience in project and vendor management;
• Excellent communication and interpersonal skills, with the ability to explain technical concepts to non-technical users;
• Strong problem-solving skills and the ability to work independently and collaboratively in a team environment.

Desired Skill-set

• Professional and technical certifications that include CCIE, CCNA, CCDP, CCNP, ITIL, CISSP, AWS Certified Solutions Architect.

Responsibilities

• Lead and manage the network operations, incident handling, maintenance, compliance, and renewal of IT infrastructure systems (Wired/Wireless) to ensure all systems are working in good condition to maintain normal operations;
• Ensure proper project and change management to ensure delivered solutions meet technical, functional, performance and business requirements;
• Responsible to detect signs of abnormality and to report overall system health status to ensure recovery actions, correction actions and preventive measures are in place for every incident reported;
• Be the point of contract to attend to any incident/problem reported and to provide the impact assessments on the outage;
• Work closely with vendors on mitigation measures and assist to resolve the issues and investigation for root cause;
• Maximizing network performance through ongoing monitoring and troubleshooting;
• Ensuring peak network performance through continuous monitoring and effective troubleshooting;
• Scheduling and coordinating network upgrades while investigating network faults;
• Ensuring network equipment is up-to-date with the latest firmware releases;
• Perform system maintenance and deliver regular network status reports to key stakeholders.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

• Hybrid Working Arrangement
• Flexi-Working Hours
• Great Career Advancement

Accountabilities and Tasks

Firmware Development

• Design, coding, testing and debugging of firmware and applications.
• Develop customized firmware based on end-users requests or requirements.
• Support customers’ queries or feedbacks pertaining to firmware-related issues.
• Perform technical review and adherence to coding standards and recording them into documentation.
• Provide mentoring and training to the Research and Development (R&D) team members.

Job Requirements

• Education level: Minimum Diploma or Bachelor Degree in Computer Science, Electrical Engineering, Elecronics Engineering or equivalent.
• Working experience: minimum 5 years of relevant experience in firmware development using C / C++ programming language is highly preferred.
• Prior experience in performing scripting test or test automation is highly advantageous.

Roles and responsibilities:

· To do conceptual and detailed machine design with regard to mechanical aspects.

· To prepare solid models, layouts, views and bills of materials for assigned design machine assemblies and sub-assemblies.

· To prepare final design configurations, layouts, solid models and production/engineering data.

· To assist in preparation of machine documentation, specifications, manual.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, resourceful and organized.

Job Requirements:

· Degree/Diploma or relevant in Mechanical Engineering.

· Preferably with working experience in designing automation systems , jig and fixture ,robotics and conveyor system.

· Proficiency with Solid Works is desirable.

· Ability to lead, manage project and communicate well with customers, vendors, engineers, technicians and team members.

Qualified candidates please send your application with full resume stating current and expected salary.

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Responsibilities:

• Lead the protocol generation and review for the assigned areas (i.e. process equipment, facilities, utilities and laboratory equipment)
• Review vendor or construction turnover document
• Review construction walkdowns to assure compliance with design
• Lead or direct execution of full C&Q project lifecycle, including URS, Design Verification, FAT, SAT, DQ, IQ, OQ and PQ etc.
• Trouble shooting equipment with a cross functional team
• Manage summary report writing wherever required
• Verification of Construction Contractor’s Document deliverables (CTODs) and Vendor Document deliverables (VTODs)
• Support the review and revision of design document, wherever required
• Liaise with identified stake holders, including suppliers/contractors
• Provide SME input wherever required
• Manage the assigned system handover
• Support the management of project schedule
• Compliant to quality and safety requirements
• Complete trainings in a timely manner
• Support company operation and business as required
• Any other project responsibilities specified in the individual OAN and organizational responsibilities assigned by management

Requirements:

• Minimally a Bachelor of Science/ Bachelor of Engineering or related scientific degree
• At least 7 years of experience in Pharmaceutical industry
• In-depth technical knowledge in the assigned area and associated regulatory requirements, guidelines, and other industry best practices
• Ability to work in a fast paced / dynamic work environment
• A fast learner with “Can-do” attitude
• Good time management skill and great attention to detail
• Proficient presentation and facilitation skill is a plus

Job Description & Requirements

1)Ensure contractor carries out daily works that follow specification and regulations.

2)Monitor quality of precast components for daily production and delivery.

3)Ensure daily production and deliveries are able to cope with site schedule and progress.

4)Inspect all new mould and ensure is ready before proceed for casting of new component.

5)Monitor daily production records and delivery records.

6)Daily inspection for pre-pour of pre-cast component and finished products’ delivery.

7)Planning and schedule for daily production works.

8)Ensure that daily production works are carried out by using latest drawing.

Any other ad-hoc duties assigned

Singaporean / Singapore PR only

Role:

Project Sales Engineer (Mechanical / Engineering Design)

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

• Assists Lead Engineer in developing concept for new project work;
• To develop Civil & Structural framing plans, layouts from concept stage to basic engineering stage to further detailed engineering stage for smaller to larger projects;
• Assists Lead Civil and Structural Lead in developing Civil and structural details, drawings, calculations, specifications for larger projects;
• Works independently in the detailed design, specifications, and calculations;
• Develops Expertise in carrying out design works to comply to local code requirements;
• Ensures that the drawings developed for the project comply to project standards/ company standards;
• Assists Lead Engineer in dealing with shop drawings, vendor print review and comment, if necessary or as advised by the Lead Engineer;
• Assists Lead Engineer working on developing necessary documents as per project requirement and also assist Lead Engineer in analyzing output results;
• Assists Lead Engineer in meeting with client in kick off meeting or other weekly meeting as and when needed;
• Provides guidance to the Assistant Engineer, Engineer in carrying out the design works;
• Visits Client site as and when necessary and as advised by Lead Engineer;
• Assists in technical report writing, compiling and coordinating;
• Assists Project Managers in achieving project completion within budget and on schedule;
• Addresses site issues related to design;
• Supports construction on solving process design issues. Visit site to check and analyses issues;
• Assists Project Managers in achieving project completion within budget on schedule;

Requirements

• Bachelor Degree in Engineering (Civil)
• Design and Construction experience preferably in industrial buildings with Precast and Long span roof trusses experiences
• Experience with checking of shop drawings for Precast and steel structures and able to do detailed Design and work in a team and able to provide details for computer aided design team
• Familiar with the Local authorities requirements for civil and structural submissions

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

We are seeking a highly skilled Senior Software Developer to contribute to significant government projects!

• Join a team that utilizes technology to enhance the lives of Singaporeans.
• Agile development culture to promote continuous learning and growth.
• Competitive remuneration package. Hybrid working arrangement.

Responsibilities:

• Design and implement scalable backend solutions using Golang.
• Engage in Agile practices like sprint planning and daily standups, alongside Scrum methods such as code review and unit testing, ensuring iterative delivery of high-quality software.
• Collaborate with cross-functional teams to deliver high-quality software products.
• Participate in code reviews and provide feedback to improve code quality.
• Deploy applications to production and provide ongoing support.
• Spearhead initiatives to streamline build and release processes, leveraging DevOps principles and automation tools to enhance deployment pipelines.
• Troubleshoot and resolve technical issues in a timely manner.
• Identify opportunities for process improvement and contribute to continuous improvement efforts

Job Requirements:

• Singaporean only.
• Minimum of 5 years of experience in Software development, with at least 4 years in Golang, ReactJS and NodeJS.
• Prior hands-on experience in handling highly scalable distributed system, configuring automated build, test, and deploy pipelines to streamline the software delivery process.
• Proficient in REST and SOAP API.
• Experience in cloud-native technology, such as AWS (Related certification will be an added advantage.
• Hands-on experience with databases like Postgres, MySQL, and Redis.
• Proficiency with development tools like Visual Code and CI/CD tools (e.g., Git, Jira, Jenkins).
• Working experience in Agile environments or projects (Scrum/Kanban).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

Location: Tuas

Working Hours: 12 hrs shift (2-2-3)

Job Scope:

• Support the shift operation in all activities, ensuring that it is meets all environmental, health and safety regulations.
• Support the STS in ensuring that all operation and maintenance activities are in compliance to the safety procedures for Lock out/Tag out, energy control procedures, line breaking activities, confine space entry, work at height, hot and cold work permitting.
• Ensure that the shop floor is in a constant state of safety and quality regulatory compliance and inspection ready
• Perform all production, pre MI and post MI activities to ensure manufacturing attainment is achieved, assist the STS in the deployment of resources based on criticality and priority.
• Assign operation task according to Manufacturing Standard Work (MSW) and Operation Standard Work (OSW)
• Participate in all troubleshooting activities in processing issues, deviations and coordinating with other functions when require immediate and preventive actions.
• Participate in all investigation, report and troubleshoot findings on both EHS and quality related issues observed during manufacturing or during batch record review.
• Participate in Continuous Improvement (CI) activities, contribute ideas and perform Plan, Do, Check, Action (PDCA) cycle
• Support the STS in the development of risk assessment, creation of job safety assessment and participate in HAZOP when required.
• Develop Standard Operating Procedures as part of change control and perform periodic review.
• Assist in all commissioning, qualification and validation activities as necessary.
• Participate as a member of the emergency response team (ERT) when necessary.

Job Requirements:

• Min. Degree in Chemical engienering or any relevant field
• Some Pharma Manufacturing intern experience

For interested applicants, please send your updated resume to: [email protected]
All candidates’ information will be treated with the strictest confidence
Melissa Zhang Zhiqi (Mezzo)
R2197564
Recruit Express Pte Ltd
99C4599

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a Cloud Infrastructure Engineer (Endpoint Security) to join us!

Responsibilities:

· Work with Product Owner and Product Principals to operate the various endpoint security tools, including:

- EPP/EDR

- Data Loss Prevention

· Work with Central ICT Infra teams to operate the on-prem components of the SSE platform.

· Conduct system health check and proactively identify and troubleshoot issue in end-to-end manner.

· Manage the change, release, incident, problem management processes in ITSM platform.

· Document the requirement and specification to address the needs for all Public Service agencies.

• Comfortable with a 5-year direct contract
• At least 5 years of experience in the above domain areas

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience.

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS's privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

Benefits

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Product Engineer (Vision Inspection Systems)
• Working Location: East Area (Nearest MRT: Bendemeer)
• Working Hours: 5 days Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assist in component selection, engineering evaluations, and testing of parts and sub-modules for vision inspection equipment.
• Design electrical parts and sub-modules for vision inspection systems.
• Maintain product design documents, including drawings and BOM (Bill of Materials).
• Work closely with and manage suppliers to ensure all design requirements are met.
• Provide troubleshooting expertise for design and system issues.
• Plan and coordinate the release of new designs to manufacturing.

APPLY NOW!!!

• Min. Diploma in Electrical or Electronic Engineering.
• Familiarity with CAD software for electrical layout and schematic design.
• Experience working with PC hardware, Windows OS, and relevant software.
• Knowledge of PCB/PCBA design, fabrication, and testing processes is a plus.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69795 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Product Engineer (Automation/Electromechanical Equipment)
• Working Location: East Area (Nearest MRT: Bendemeer)
• Working Hours: 5 days Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Set up and troubleshoot semiconductor equipment.
• Document engineering enhancements for continuous improvement and future reference.
• Develop procedures for the assembly, inspection, and testing of equipment.
• Collaborate with the engineering and software teams to enhance system designs.
• Work alongside cross-functional engineering teams to troubleshoot and resolve system issues.

APPLY NOW!!!

• Min. Diploma in Mechanical or Mechatronics Engineering.
• At least 2 years of experience in setting up and managing automation equipment.
• Possesses a thorough understanding of electromechanical systems.
• Willingness to travel internationally for field support as needed.
• Availability to work overtime when required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69727 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Contract :

• 3 months - Jan 2025 till Mar 2025

Working Hrs:

• Monday to Friday, 8:30 am to 6:00 pm

Responsibilities:

• Maintaining computer networks including mainframes, VPNs, routers and other physical hardware
• Installing and configuring network equipment
• Creating firewalls and updating virus protection software and data security systems to keep data and communications protected

Qualification:

• ITE or higher

Experience:

• Min 1 year

The EICA Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 5 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas or power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste treatment).

The duties shall include the following but not limited to:

• Work as owner’s engineer to lead the electrical team for project implementation at site.
• Proactive attitude and solution orientated personality with leadership mentality and for the EICA discipline, assisting project director for the contract execution.
• Strong capability and experience on 66kV, 10.5kV, 6.6kV and LV related power distribution equipment and cabling installation and commissioning requirement. Experience of large power transformers, generator circuit breakers, MV switchgear, protections and control equipment, MCC and UPS and DC system is expected.
• Having good understanding and interpretation of SLD, protection and metering SLD, schematics and cabling drawings.
• In depth of understanding for electrical power automation for electrification of WtE project.
• Contracts management in managing site works while maintaining swift communication with client and contractors for the WtE project
• Familiar with SS638 requirements on electrical installations in Singapore.
• Having multi-discipline coordination attitude in execution of electrical works
• Basic knowledge of instrumentation and control equipment for site works
• Review the submittals from Contractors for electrical installation and commissioning procedures of various sub-packages.
• Engage in site meetings with technical discussion contractor and client
• Joining site inspection for contractors works.
• Participation of FAT and SAT of electrical equipment
• Ability to use Navisworks to review 3D BIM Model for routing of site utilities

Job Requirements:

• Review of DCS / PLC system configuration, topology and controller, RIO engineering deliverables for the implementation of WTE automation systems
• Review the submittals from Contractors for Process Control like STG package, Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services, Enterprise Resources Planning, EMIS, PFMS, Communication Network Infrastructure etc.
• Essential understanding of P&ID of process engineering
• Engage in Technical discussion for all control system related issue with contractor and client
• Participate in HAZOP review, SIL safety and design for safety workshops
• Work with electrical team closely for all power and process interfaces
• Participation of FAT of automation equipment DCS, EMIS, PMS, PLC, Weighbridge systems etc
• Provide Technical support in Testing and Commissioning of WTE plant

We are looking for an L1+L2 App Support Engineer to join our dynamic team! You will play a crucial role in ensuring the smooth operation of applications and providing technical support to end users.

• Competitive remuneration package (up to $4,000 + AWS + VB).
• Hybrid working arrangement.
• Be part of a collaborative and supportive team that encourages growth.

Responsibilities:

• Provide assistance to users, addressing inquiries, troubleshooting issues, and quickly implementing solutions to restore systems to full functionality.
• Keep detailed documentation of user interactions, reported problems, solutions applied, and any further actions needed by management or tier 3 support.
• Create user manuals and troubleshooting guides to aid both support teams and users in effectively interacting with the system.
• Work closely with L3 Technical staff and the project manager to set objectives and plan system upgrades and improvements.
• Develop and implement new procedures to boost efficiency, enhance customer satisfaction, and reduce operational costs.

Job Requirements:

• Singaporean only.
• Bilingual in English and Mandarin to handle Mandarin-speaking clients.
• Good writing and communication skills.
• Strong troubleshooting and problem-solving skills with experience in identifying and resolving complex technical issues.
• Experience with ticketing systems (e.g., JIRA, ServiceNow) and version control tools (e.g., Git) is a plus.
• Prior experience in supporting mobile or web applications.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781