• To carry out electrcial/instrumentation related detailed design and preparation of drawing.
• To interpret and develop P&ID, technical data sheet preparation and I/O wiring diagram.
• To carry out electrical/instrumentation calculation for the design.
• Responsible for reviewing of electrical/instrumentation documents and specification from clients and consultants.
• To check and review all electrical/instrumentation related drawings and documents from suppliers and vendors.
• To liaise with clients, consultants, sub-contractors to resolve technical issue at site and in office.
• To co-ordinate with engineers of other disciplines within the department.
• To prepare Pre-procurement including evaluation of technical and commercial bid from vendor and supplier.
• To provide engineering support in tendering of new projects such as preliminary design, material and cost esimates etc….
• To provide technical support to project team for on-going projects and resolve any technical issue on site.
• To assist in preparation of project schedule, related work procedure/method of statement and monthly progress claim.

- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

- Excellent written and oral communication skills in both English and Mandarin.

We regret that only the shortlisted candidates will be notified

The role will consist of a technical component, with a focus on material testing as well as designing new packaging systems. You will perform various types of testing for medical packaging materials and sterile barrier systems (packaging for sterile medical devices). You will design and create prototypes to support new sales growth and customer retention and assist external as well as internal customers with technical projects/package testing and consulting. You will own and manage smooth operation of a technical development center under the supervision of a senior engineer.

Primary Responsibilities

• Perform various types of physical, mechanical, analytical and integrity testing for medical device packaging materials and packaging systems

• Ensure that testing and lab procedures are performed safely. Ensure personal safety and routinely evaluate equipment for potential safety risks

• Design and create package prototypes using 2d and 3d software based on requests / inputs received from sales team. Maintain and control proper inventory of packaging materials, test material and test equipment accessories

• Maintenance of Lab equipment - Write/update work instructions, procedures, calibration instructions and test methods as required

• Liaise and collaborate with the technical team members at other global sites on technical topics and lab related activities

• Liaise and collaborate with external test labs, sterilization partners and contract manufacturing facilities, as required

• Communicate effectively with other Oliver employees both locally and globally

• Identify gaps and constantly strive to update technical capabilities of the Technical Development Center

• Provide expertise in material selection and package design of sterile barrier systems in order to support new sales growth and customer retention

• Occasionally, travel within APAC region to support our customers in the field including trial runs, troubleshooting customer processes and technical sales activities

• Actively support customer’s technical teams on new product introductions and validations

• Support the QA department with technical assessment of CAPA investigations

• Support product change notifications for customers

• Work closely within the Technical team to develop viable packaging solutions

• Qualify/Test new materials as per ISO 11607 – Ensure capability levels through thoughtful analysis and rigorous testing

• Design new products that can deliver Six Sigma process capability levels. Support/Improve existing product portfolio

• Other duties that assigned

Basic Qualifications

• B.S in Packaging engineering, chemical or mechanical engineering preferred. Candidates with a

graduate diploma in a similar engineering discipline may also apply

• 3-5yrs experience in medical device packaging

• 2d and 3d CAD knowledge / experience desired (AutoCAD 2d and Solidworks 3d preferred)

• Ability to stand and perform physical testing required.

• Strong listening ability and patience

• Ability to adapt to different working styles and cultures

• Positive attitude, ability to work under pressure and people oriented

• Strong written and verbal communication skills. Works well with people across the organization

Preferred Qualifications

Interpersonal Skills:

• Comfortable speaking before an audience

• Requires contact with others (face-to-face, by telephone, virtual meetings, VOIP or otherwise) and working and interacting in a group or team

• Ability to read, analyze and interpret data/documents/safety rules or manuals/operating instructions or procedures/maintenance

• Ability to write in a clear and concise manner

• Ability to speak effectively, present information, responds to questions in a clear and concise manner.

Technical Skills:

• MS Office, particularly Word, Excel, PowerPoint and Outlook, Essential Functions

• Knowledge of 2d and 3d CAD knowledge / experience desired (AutoCAD 2d and Solidworks 3d)

Other Skills:

• The ability to predictably and regularly attend work and to be punctual

• The ability to read and understand documents and drawings

• The ability to work cooperatively with others

• The ability to deal politely and professionally with customers and/or coworkers

Special Requirements

Ability to travel 5-10% of the time internationally

Occasional evening / weekend work might be required (e.g. night calls with USA/EU)

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Industrial Engineer to be part of our Industrial Engineer Department diverse team of talent.

What you will be working on:

• Maintain and improve capacity planning methodologies to ensure accuracy
• To achieve planned mix & capacity through equipment utilization improvement/conversion/other capacity improvement plans to ensure the plans meet operations goals
• Establish layout plans for all production equipment based on operation needs
• Ensure timely equipment installation/release for production to meet operation’s needs
• Initiate Tool-to-Tool Matching (Golden/Lemon) as well as Best-In-Class benchmarking to strie for the best perforamnce of the tools
• Update/maintain tool capacity/productivity database for capacity planning & productivity indices tracking
• Manage capital budget to reflect necessary equipment requirement for capacity mix and new technology introduction
• Establish standard costing methodologies & wkly/qtly/annual standard costing
• Cost management (forecast/tracking/improvement/modeling/analysis/benchmarking)
• People productivity management/coordination
• Initiate/lead/drive continuous improvement projects & Best-Known-Method sharing
• Strategic planning initiatives for capacity expansion, tool/people productivity improvement & cost reduction
• Lead/coordinate people productivity/automation initiatives. Headcount modelling
• Business Continuity Management and Risk assessment
• Enhance current systems, improve methodology & modelling
• Coach/mentor & train new Engineers/Associate Engineers

More about you:

• Degree in Industrial Engineering/ Mechanical/ Manufacturing
• Functional / Technical skills and knowledge: Knowledge in semiconductor processes and IE tools used in the semiconductor industry
• Computer skills : MS Office, MS Access, VBA, SQL, Oracle, Cognos, AutoCAD
• Strong communication and presentation skills
• Team player with strong problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

.Supervise project team and sub-contractors to take positive actions and accountability for their assigned work and complete their works on time as per agreed.

· Liase with Client, Consultants and Project team for planning, executive and completion of projects.

· Manage and supervise the team of technical staff and subcontractors carry out maintenance services, schedules, improvement works . To make sure standards of building performance, quality, time and cost schedules and safety complied.

· Leading monthly meetings and submission of routine reports.

· Oversea and overall responsible for works carried out by Junior Supervisors assigned.

· Responsible for keeping daily work schedule.

· Attend regular meetings with client , supplier and sub-contractors.

· Analyze, manage and track projects costs against budget

Job Description:

A Singapore based precision optical company is looking for dedicated sales engineer who is fast learner, enthusiastic in sales and customer services

Job Responsibilities:

- Identify and develop new business accounts

- Establish good working relationships with customers and partners

- Follow-up and manage customers enquiries and order shipments

- Recommend suitable products and solutions to the customers

- Provide monthly sales update to the management

- Evaluate new potential products for customer

- Manage with system set up, paperwork, commissioning and ensure that delivered system performance is within specifications

- Attend local or overseas events, conferences and exhibitions

Job Requirements

- Diploma or Degree in Engineering (EEE; Electronic, Mechanics; Biomedical etc.) related discipline

- 2 years of sales experience in optics, laser, spectroscopy, and photonics is preferred.

- Fresh graduates who are keen to explore industrial sales or with engineering background are also welcome to apply

- Be keen on business travelling

- Self-driven and motivated team player

- Good presentation and communication skills with willingness to learn

ABOUT Defense and Security Engineering Team

Established in Singapore in 1973, Thales Singapore Engineering Team leads and pioneers innovative solutions for the Asia-Pacific region. Our coverage spans across an extensive spectrum of fields, encompassing proven solutions in Defence & Military, Security & Surveillance, Intelligence & Big Data, Secure Radio Communications, to Cybersecurity, Network & Infrastructure Security.

We are at the forefront of cutting-edge technology with a rich legacy in excellence and innovations. With the combined expertise of 2100 staff in Singapore, and over 80,000 professionals across 68 countries, Thales Singapore Engineering Team is the key contributor in keeping Asia-Pacific & the world safe and secure, protecting and changing lives every single step we take.

Along with other departments in Singapore, such as Thales Research & Technology, we engineer state-of-art technological solutions from dreams into reality for the world. If you are ready to make a difference on a global scale, our team is the place for you. Join us today and embark on an extraordinary journey of writing the next chapter of history for a better world.

KEY ACTIVITIES AND RESPONSIBILITIES

As a Software Engineer, you are accountable for:

• Be part of the Security Development team to build innovative Security solutions for Homeland Security, Smart Cities and Critical Infrastructures.
• Be responsible for the technical/solution designs, code development, and component test execution to demonstrate alignment to the product/functional specification of the solution.
• Develop and demonstrate a broad set of technology skills in web application technologies, micro service design patterns, Open Source libraries and frameworks, and technology architecture concepts.
• Collaborate with product/solution architects to create, implement and maintain the product/solution development roadmap.
• Be the main contact point to represent the team, join agile ceremonies and communicate effectively with other development teams and product management team.
• Ensure all work adheres to Thales software development methodologies and processes
• Thoroughly document design to ensure the usability, supportability and maintainability of the developed
• Perform sub-system installation, configuration and integration to support Proof-Of-Concept (POC)/demo.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Experience required:

• 3+ years of hands-on experience of full web application development lifecycle of scalable micro-services-based architectures; including tools, best practices, continuous deployment, dependency/complexity management, scale/performance tuning, monitoring, resiliency, etc.
• Experience in SCRUM/Agile software development methodologies
• Strong knowledge of architectural styles and design patterns is good-to-have

Programming languages/frameworks/Technologies:

• Proficiency in Go Language, various Go frameworks and tools
• Proficiency in building responsive layouts with CSS and HTML5
• Proficiency in building complex Angular applications with Typescript
• Experience with Android (Kotlin)
• Familiar with database technologies such as Postgresql and ClickHouse
• Familiar with MQ and Apache Kafka
• Unit-test code for robustness, including edge cases, usability, and general reliability
• Strong knowledge in version control using GIT
• Maintain the CI/CD pipeline and familiar with Kubernetes. Knowledge about Ansible is good-to-have.
• Knowledge about Mapbox SDK (Android or iOS) is good-to-have.

Behaviour:

• Good communication skills and team-works

Analytical and problem-solving skills

Essential Duties and Responsibilities

• Responsible for software development lifecycle activities, including system study, analysis, design, code, test, and deployment for product using JavaScript, TypeScript, ReactJS, Redux, HTML5 and CSS
• Work with project team members to identify product requirements and help define project scope, objectives, and plans accordingly
• Write, analyze, optimize, and debug product application code to maximize performance and quality
• Create automated unit tests and integration tests
• Write and maintain the internal tools to diagnose software component issues, improve productivity of build and release
• Document technical specifications and functional specifications
• Participate in agile planning and scope estimation for team projects
• Mentor and execute in Agile, Lean, and Continuous Delivery best practices

Requirements

• BS/MS in Computer Science/Engineering or related field
• 5+ years of software development experience in user interface application development using JavaScript, TypeScript, ReactJS, Redux, HTML5 and CSS
• Experience in turning designs into responsive UIs with ReactJS /HTML5 / CSS (LESS)
• Experience in leveraging development workflow with tools like npm, webpack and Node.js
• Experience developing in Node.js development
• Experience with design patterns, performance/memory analysis, multithreading
• Agile / Scrum experience including TDD, unit testing, and continuous integration
• Strong analysis and problem-solving skills
• Excellent interpersonal skills including verbal and written communication skill
• Communicates well in English

Bonus

• Experience in WPF/WCF and MVVM programming
• Experience on creating webview2 UWP apps
• Experience in integrating with RESTful APIs

CONSTRUCTION ENGINEER/QS

Islandwide, Contract Full Time

Professional, 5- 10 years exp above

Engineering

$3,500to$6,000

Monthly

Roles & Responsibilities

Responsibilities:

· Manage project management and daily site operations.

· Handling technical and engineering issues.

· Plan the manpower require for the site works.

· Mange efficient utilization of manpower, raw materials, and consumables for our construction projects at construction sites.

· Oversight of the works and resolving any technical issues/ difficulties that may arise on constructions sites.

· Plan the works at construction sites carried out are complying with safe work procedures.

· The Engineering report to project team on work progress at construction sites.

· Full time supervision at site.

· Working on construction site, could accept OT base on site requirement.

· Beside Engineer Work, & some QS work as well.

Requirements:

· Diploma/Degree/ or any BCA Relevant in engineering or equivalent

· Min 5- 10 years of Experience in Construction Engineering field.

· Leadership and organizational Responsible skills.

· Support APM/PM Skills.

· Support CAD/project, drawing and design, and Aluminum Steel Engineering for any construction knowledge.

· Great written and verbal communication skills/in terms of English Languages.

· A willingness to learn/ Hardworking excel Skills.

· Good Communication/ follow the daily instruction for the APM/PM and the site supervisor instruction.

· Hiring 2 Candidate of Construction Engineering.

· Engineer has to write structure steel and metal work

Please apply as following, and regrets only shortlisted will inform.

Thank you.

Email: [email protected]

• Involve revese enginnering based on part given.
• Create the part drawing from the component by measuring and prepare the new cnc program.
• Lead a programmer and machinist to successfully deliver the cam program for precision machined component projects
• Work closely with senior management to prepare quotation and concept dedign for new projects
• Prepare and track schedules for live projects - manage deliverables targets by designers and drafters
• Train and groom new Cnc 3d cam programmer / machinist in company
• Create, maintain and enforce workflow processes to enhance design department efficiency
• Manage team KPIs

Duties to Be Performed:

The Senior Chemical Engineer will work on designing, tendering, and monitoring the installation of bulk gas and special gas systems for industrial properties in semiconductors, electronics, biopharma, and related industries. The gas systems include bulk gases, high-purity inert gases, flammable gases, corrosive gases, hazardous gases, and related distribution networks.

The Senior Chemical Engineer will collate the client’s capacity requirements and specifications and prepare the conceptual design, make a detailed design for system capacity, configuration, schematic, P&ID, PFD, layout, distribution, and system parameters, and prepare documents like the scope of work, reports, specifications, standards, logistics, and detailed drawings for tender. He or she will review proposals from contractors and continue to support them during installation when required.

The successful candidate will work closely with other disciplines such as architects, civil, cleanroom, electrical, automation, mechanical, and construction engineers, as well as CAD/ BIM designer in designing and delivering the project.

Job / Skills Requirement:

You should have a bachelor's degree in chemical engineering or equivalent.

You should have sound experience in designing high-purity, and specialty gases and systems related to semiconductors manufacturing or similar facilities. You should be able to comprehend clients’ URS, and design with concept design, schematics, PFDs, P&IDs, routing layout, the scope of work, specifications, and functional descriptions. The experience in designing chemical systems will be definite added advantage.

Your familiarity with the Semi standards and Singapore standards, manufacturing tools, materials, and CAD/ BIM will be an added advantage.

You should be able to make presentations to clients and engineers on design, tendering, project execution, supervising progress, and quality of work.

Able to work independently.

Able to travel / relocate.

1. Assist Project Manager on Engineering efforts in technical projects at Semiconductor fabs in Singapore and occasional overseas.
2. Provide on-site engineering equipment start-ups, mechanical parts installation, trouble-shooting and maintenance support.
3. Acts as a Technical Resources in performing repair of Electro-mechanical Assemblies
4. Facilitates continuous improvement project that add value to customer.

Requirement

At least 1-2 years experience in Semi-Conductor Field

Job Descriptions:

Simtrum was founded in 2019 with the core mission to serve the optical industry with innovation and efficiency. Our founding team has decades of research and development experiences (across NUS and A-star) in high-end microscope systems. We now focus on confocal, super-resolution microscopy and other related fields, catering to both academia research and high end industrial production needs. Our proprietary high resolution microscopes adopt state of the art optical technology, image processing algorithms, with excellent imaging performance to meet the high resolution and fast imaging needs of our technology partners.

Simtrum is a young startup with many exciting opportunities to offer to the right candidates with the right mindset. We are now seeking the following commercial talents to join our team, to expand our reach and support our growth:

Job Descriptions:

1. Visit university professors to promote the company's microscope products and complete sales tasks.

2. Develop regional business based on existing products and assist in collecting market information for products under development.

3. Identify potential markets and establish effective market entry methods.

4. Establish marketing plans and strategies to expand your customer base.

Basic Requirements:

1.Ideally you should have a foundational education in either Electronic Engineering, Photonics, or Physics;

2.exposure to Laser or Optics industry a huge plus. Candidates with at least 1-2 years of related sales, marketing or e-Commerce experiences will be given priority considerations.

3.We are also open for fresh graduates with the right attitude and willingness to learn. To do well in the Simtrum environment, you should be someone with initiative, curious, can-do attitude, flexible, and eager to learn.

Responsibilities:

• Prepare the contract & procurement, sourcing strategies and facilitate/coordinate workshop to finalise strategies under the guidance of the Procurement Manager / Business Manager.
• Establish contract & procurement plan and set up the procurement system for the subsequent phases
• Establish procurement schedule to support modularisation study with the engineering contractors.
• Establish Project Approved Vendor List, preliminary supplier qualification (include. qualification system) and include new Chinese Eco System to lower the CAPEX.
• Engage CNPC procurement and Chevron Procurement Representative to provide guidance on vendors and supplier list to support project optimal capex exercise.
• Review and finalise vendor and fabricator list for enquiry to support Phase 3 cost estimate
• Provide write up, deliverables and work with Project Team, Shareholders and SRC stakeholders to set up the procurement plan and establish procurement system for Phase 4.
• Establish strong collaboration with internal/external stakeholders and suppliers to deliver commercially innovative solutions.
• Develop negotiation strategies and facilitate commercial negotiatons with vendors/suppliers/fabricators/trade contractors
• Support and liaise with base refinery on contract placement and draft Contract Committee deliverables for approval.
• Carry out all open bid procurement activities, e.g. third party consultant services/studies etc.

Requirements:

• Minimum 8~10 years experience in procurement activities in Oil & Gas Industry
• Bachelor Degree in Engineering or equivalent.
• Understanding of strategic, technical, legal, finance, taxation and commercial issues, able to cope with complexity and uncertainty.
• Experience managing various Contract formats (Reimbursable/Re-measurable/Lump Sum) for Major and Mega-Projects
• A high degree of skill in written and oral communications.
• Local and/or regional procurement experience (China/Asia) in a MNC, or fabrication yard procurement experience would be an advantage.
• Good procurement experience in international market.

• Plan, conceptualize, and create mechanical designs for new products
• Develop testing processes, and perform testing and validation of new designs
• Generate working prototypes for beta testing and customer demonstration
• Perform engineering calculations to support design work
• Create and review technical drawings, plans, and specifications using computer software
• Collaborate with multi-disciplinary engineering teams, and work with vendors and contractors
• Perform detailed documentation to track project development and design process
• Ensure project timeline is met and project stays within budget

Duties to Perform:

The senior Gas Engineer will work on designing, tendering, and monitoring the installation of bulk gas and special gas systems for industrial properties in semiconductors, electronics, biopharma, and related industries. The gas systems include bulk gases, high-purity inert gases, flammable gases, corrosive gases, hazardous gases, and related distribution networks.

The senior Gas Engineer will collate the client’s capacity requirements and specifications and prepare the conceptual design, make a detailed design for system capacity, configuration, schematic, P&ID, PFD, layout, distribution, and system parameters, and prepare documents like the scope of work, reports, specifications, standards, logistics, and detailed drawings for tender. He or she will review proposals from contractors and continue to support them during installation when required.

The successful candidate will work closely with other disciplines such as architects, civil, cleanroom, electrical, automation, mechanical, and construction engineers, as well as CAD/ BIM designer in designing and delivering the project.

Requirements:

You should have a bachelor's degree in chemical engineering or equivalent.

You should have sound experience in designing high-purity, and specialty gases and systems related to semiconductors manufacturing or similar facilities. You should be able to comprehend clients’ URS, and design with concept design, schematics, PFDs, P&IDs, routing layout, the scope of work, specifications, and functional descriptions. The experience in designing chemical systems will be definite added advantage.

Your familiarity with the Semi standards and Singapore standards, manufacturing tools, materials, and CAD/ BIM will be an added advantage.

You should be able to make presentations to clients and engineers on design, tendering, project execution, supervising progress, and quality of work.

Able to work independently.

Able to travel / relocate.

General Description & Mission:

The main mission is to manage the evolution of software solutions that support data processing for all of the Telecom offers of the Thales DIS MCS division for the Telecom, M2M and IOT markets.

You will play the role of Product Owner and you will be responsible for software solutions within the Product Engineering team located in Gémenos and Singapore. You will be responsible for their life cycles and the continuity of their services.

As a software solution expert, you will lead technical projects, optimize processes and ensure the best level of services within the Product Engineering team located in Gémenos / Singapore.

As part of a diverse team, you will work on a portfolio of solutions deployed and maintained either in Thales DIS factories around the world or in a Public/Private Cloud environment. You will fulfill an integral software engineering role, involved in many aspects of software development throughout the full software lifecycle. You will participate in the digital transformation of Data processing solutions.

Responsibilities:

• Understand the differences between vision, strategy and tactics, short and long term roadmap and value proposition
• Lead ceremonies related to backlog management (refinement, sprint planning, etc.)
• Cut, in accordance with the “Definition Of Ready” and “Definition of Done”, the functionalities into “User Stories” to write them and define the acceptance criteria
• Prioritize product backlog items and maintain an up-to-date backlog for the team
• Facilitate user demos with team members for direct feedback
• Measure the progress of “delivery” with the scrum master / agile coach
• Produce simple indicators on the use of the product by users (active daily users, etc.)
• Resolve, with the help of managers and architects, conflicts/problems/priority decisions
• Support deployment teams
• Provide expertise for solving complex problems (L3 level)
• Participate in the continuous improvement of your job
• Internal stakeholders : 90%You are in contact with the agile development teams and other stakeholders in the Data processing product line. to know
  Product Engineering Department, Development, Infra deployment & support,
  Production sites (in particular the “Data processing”, Equipment technical engineer and Managers teams)
  Operation IT/IS Manufacturing and office
  Cloud ops
  You are in contact with product and business experts.
  You seek buy-in and promote collaboration within Data Processing engineering teams. You understand the challenges provided by product/service managers and its ecosystem:
  Technical consultants
  Order process management
  IT department: MSC, local IT managers, Corporate IT managers
  Industrial and Maintenance Department
  Corp Security department
• External stakeholders : 10%Subcontractors and suppliers
• Lead or participate in projects aimed at developing and improving the efficiency of data processing.
• Contribute to the digital transformation project (Devops)
• Failure analysis (software, method, process).
• Update the knowledge base with software/process information after each deployment and issue.
• Participate in the definition of activity KPIs.

Requirements:

• Master’s degree in engineering, Computer Science or related field
• At least 3 years of proven experience as project leader in industrial and software environment, or with 5 year experiences in Industrial software development
• Good project management skills
• Excellent technical skills and software development experience
• Agile framework skills (Scrum, Kanban, etc.)
• Fluent English (oral and written)
• Customer service oriented, organized, autonomous. Able to prioritize and provide timely technical solution support.
• Good communication skills to coordinate other team members
• Good technical background in the areas of smart cards, telecommunications, banking, identity, cryptography and overall security.
• Experience in C/C++/Java/python software development languages
• Experience using relational databases (Oracle/MariaDb/PostgreSQL, SQL queries)
• Technical skills and experience in Cloud architecture environment and solution design
• Technical skills in IT infrastructure, Windows/Linux system configuration, network design
• Basic knowledge of Agile and SCRUM methods
• Problem-solving methodology, tenacious with a problem-solving approach
• Autonomy, initiative and team spirit.
• Curious to support innovation.
• Customer and business oriented
• Anticipate the needs and expectations of the company.
• Eager to learn and be challenged to develop new skills and experiences.
• Strong team player with a positive attitude and networking skills
• Be rigorous, guarantee responsibility, keep your promises.
• Proven ability to excel in a fast-paced environment.

Responsibilities:

• Collaborate with product and business team to create solutions considering user needs and technical challenges
• Work with designers to maintain consistent creative visual standards and governance across user journeys
• Translating the product vision through research, sketching, prototyping, user-testing, and iteration related to digital product design.
• Plan and conduct research to gather insights or validate hypotheses and design solutions
• Designing user flows, wireframes, mockups, and high-fidelity product prototypes according to the UX concept for Digital products
• Interpret both quantitative and qualitative data as parameters to be documented in the design decisions
• Designing interface element (UI) graphics according to design guidelines to increase product usage with appropriate design methods
• Prepares all design assets for submission to the developer.
• Design low-fi, high-fi wireframes, suggesting copywriting (if applicable)
• Articulate design concepts, and required interaction with stakeholders
• Ensure the consistency, and usability, for applicable devices, and systems., i.e., iOS and android

Requirements:

• Min 5-8 years of relevant experience
• Proficiency in user-centered design and research methodologies, with strong collaborative skills for cross-functional teamwork.
• Solid understanding of current UI design practices to create an efficient & seamless user experience, and a passion for user interface design and understanding of UX processes.
• Working experience on prototyping, Visual design applications (Figma, Adobe XD, Sketch etc), Wireframing and User Flows

Key Responsibilities & goals:

• Develop and lead a high performing product Marketing team
• Lead product life cycle for Hilti’s full product portfolio for the Region
• Lead category strategy for our core product categories to ensure that we win
• Relative Market Share and maximize profit for the Region
• Be the regional counterpart in the global functional community

Essential knowledge, experiences and skills

• A strong leader who can develop to achieve their potential
• 8-10 years of relevant experience
• Masters in Business fields, bachelors in engineering is a preferred qualification
• Strong commercial and external orientation
• Strong analytical skills and ability to create clarity in a dynamic landscape of complex topic
• Experience in leading large scale change initiatives
• Strong communication & interpersonal skills working in a fast paced commercial environment involving multiple key stakeholders

Product area

Google Customer Solutions (GCS) sales teams are trusted advisors and competitive sellers who maintain a relentless focus on customer success by bringing the best Google has to offer to small- and medium-sized businesses (SMBs), which are the backbone of our communities. As a member of our team, you’ll have the opportunity to work with company owners and make a real difference in their businesses by helping them grow. Together, we help shape the future of innovation for customers, partners, and sellers...and we have fun doing it.

Job description

At Google, the product is at the core of the company. Our group, called PSA (Product and Sales Activation), brings products to market, and market to the products. We sit at the junction of product, strategy, and go-to-market to shape the long-term product roadmap, best commercialize new products, and drive long-term strategic initiatives. We work across the Google product portfolio. Today, Asia-Pacific is the fastest growing advertising region in the world and digital advertising will continue to fuel much of that growth going forward. Within this exciting environment, it’s our team’s responsibility to influence everyone - advertisers, partners and our colleagues about what Google can provide to make advertisers more successful and ensure that happens. Businesses that partner with Google come in all shapes, sizes and market caps, and no one Google advertising solution works for all. Your knowledge of online media combined with your communication skills and problem solving abilities shapes how new and existing businesses grow. Using your influencing and relationship-building skills, you provide Google-caliber client service, research and market analysis. You anticipate how decisions are made, explore and uncover the business needs of Google's key clients and understand how our range of product offerings can grow their business. Working with them, you set the goals and the strategy for how their advertising can reach thousands of users.

Qualifications

Job responsibilities

• Co-lead Joint Technical Plans (JTP) with Google Customer Solutions (GCS) Sales and technical specialist to assist large Ad Agency partners across APAC to leverage Google Measurement solutions, including Incrementality, Attribution, MMMs, and 1PD to drive customer growth.
• Develop comprehensive measurement solutions that address customer business and marketing challenges and provide guidance to agencies on methodologies for Mergers and Acquisitions (M&A) solutions. Coordinate cross-functionally to drive the program management and execution of JTP plans.
• Collaborate with Sales and Global PSA to develop training programs that enhance seller and agency knowledge on Google’s priority M&A solutions. Collaborate with third-party measurement providers.
• Share customer and product feedback with Global Product Leads to align product roadmaps with the needs of GCS customers.
• Collaborate with Sales and Global PSA to identify key challenges, unlock growth opportunities, and develop scalable solutions.

Minimum qualifications

• Bachelor's degree or equivalent practical experience.
• 4 years of experience in product management, marketing, management consulting, or project management in technology.
• Experience working with Product Management or Engineering teams, executive leadership, and cross-functional stakeholders.
• Experience developing business strategies or managing cross-functional initiatives.
• Experience with media effectiveness and advertising measurement solutions.
• Ability to communicate fluently in Mandarin and English in order to support the client management in the Greater China market.

Preferred qualifications

• Experience partnering with clients on technical products (e.g., pitching solutions, consulting, project management, implementation, demonstrating products, or technical sales).
• Experience influencing stakeholders to devise and scale a strategy.
• Proven track record of measuring business impact of online media.
• Excellent written and verbal communication and people management skills, with experience of influencing senior-level executives, managers and sellers.
• Excellent project management skills, with experience managing complex projects with stakeholders across multiple functions.
• Excellent strategic thinking and problem solving skills, with the ability to lead complex operational and strategic initiatives.

Job Position:- Senior Resident Engineer (C&S)

Time:- Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Degree in Civil or Structural Engineering or equivalent.
• Registered as Resident Engineer with BCA/IES/ACES.
• More than 10 years of relevant site supervision experience as a resident engineer.

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local building codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

What you will do:

The Systems Applications Engineer, National Accounts will Provides sales support to the engineering and sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Oversee the application engineering team, providing configuration, enhancement, and support for technical documentation and presentations to clients.
• Customize and introduce new features to Metasys software and in-house developed applications based on end-user requirements.
• Design and construct new applications tailored to meet customer specifications and needs.
• Guide application engineers in writing and executing tests on complex programming, troubleshooting issues as they arise, and supporting product launches.
• Provide technical support and troubleshoot application issues while performing tests on complex programming and assisting in product launches.
• Assist the application manager in process improvements to enhance productivity and efficiency.
• Collaborate with system integrators (SI) to monitor their performance with quality assurance/quality control checks and ensure completion sign-off.
• Manage vendor relationships, including scoping application services and reviewing deliverables.
• Collaborate as part of a design, engineering, and operations team.
• Knowledge of ACMV and controls associated with Johnson Controls Metasys will be advantageous.
• Deliver customer support by responding to technical queries with detailed analyses of building management systems, tooling costs, and design/process improvements to meet all customer needs.
• Collaborate with engineering, sales, and operations teams to understand standard fabrication techniques, composite materials, and customer demands to develop design details.
• Create and present technical engineering information based on customer proposals, including 3D representations of products and tooling.
• Prepare cost estimates by analyzing blueprints, customer documents, and consulting with engineers and technical personnel.
• Conduct conceptual designs of composite components and assemblies to support proposals.
• Generate accurate CAD models of components and assemblies.
• Develop detailed bills of materials for proposals.

What we look for:

• Bachelor's Degree in Engineering with a minimum of 5 years of relevant experience in Access, Intrusion, and Video Management systems
• Demonstrate strong verbal and written communication skills, including the ability to efficiently articulate technical subject matter
• Good communication skills, with an ability to express and understand complex technical concepts.
• Experience of working with globally distributed teams & matrixed environment

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

You will be involved in the end-to-end agile development lifecycle for in-house RPA and AI/ ML projects starting from UI/ UX Design to Cloud Engineering & Operations, Software Development, DevSecOps, Quality Assurance and Application Security.

Key Responsibilities

1. Provide mentorship, evaluate submitted problem statements and work with Product Owner and/or Citizen Developers to automate potential day-to-day processes and workflows using Robotic Process Automation and AI/ ML (RPA)

2. Work with UI/ UX Designer as they engage the Product Owner and stakeholders for user research to produce the User Journey Maps and high-fidelity wireframes, which feeds into development sprints (where required)

3. Develop clean, efficient and extendable codes using C, C++, Java and other relevant programming languages, which includes understanding code refactoring and design patterns to reduce and/or eliminate technical debt (where required)

4. Work with Cloud Engineers to setup cloud services for deployment on Government Commercial Cloud (where required)

5. Work with Quality Assurance Engineer to prepare test cases as well as entry and exit criteria for SIT and UAT to ensure that user requirements are met as described per product backlog

6. Work with Application Security Engineer to perform System Security Acceptance Test (SSAT), which includes Secure Code Review (SCR), Vulnerability Assessment (VA) and Penetration Test (PT) and remediate the security findings before seeking clearance and approval from CISO and CIO respectively (where required)

7. Maintain and update library of reusable code snippets, components and modules

8. Develop technical documentation to guide future RPA and AI/ ML development projects

9. Identify best practices and continuous improvement in deployed automations

10. Conduct RPA and AI/ML-related brown bags and information sessions for staff to share knowledge and increase adoption

Requirements

1. Background in Computer Science, Engineering or related disciplines.

2. Highly proficient in programming languages such as Python, C, C++, Java and other relevant programming languages.

3. Good technical knowledge and experience working with RPA tools such as Blue Prism, UiPath, etc as well as basic understanding of foundation models from Microsoft, AWS and Google.

4. Participated in at least one full software or product development cycle, preferably using Agile Methodology

5. Excellent communication skills

6. Teamwork and collaboration skills

7. Possess critical thinking and problem-solving skills

Project Engineer (Mechanical / Electrical Engineering)

We are currently seeking a highly organized and detail-oriented individual to join our team as a Project Engineer. In this role, you will be responsible for overseeing and managing various engineering projects from conception to completion. You will work closely with cross-functional teams to ensure projects are delivered on time, within budget, and meet the required standards.

As a Project Engineer, your role will involve analysing project requirements, developing project plans, conducting feasibility studies, and coordinating project resources. You will also be responsible for monitoring project progress, identifying potential issues, and implementing corrective actions when necessary. Additionally, you will collaborate with external stakeholders, such as clients and contractors, to ensure effective communication and successful project outcomes.

To excel in this position, you must possess strong project management skills, technical expertise, and excellent problem-solving abilities. You should be able to work well under pressure and manage multiple projects simultaneously. Exceptional communication and interpersonal skills are also essential for effectively collaborating with various stakeholders.

Responsibilities

• Develop and implement project plans based on project scope and objectives
• Conduct feasibility studies and perform risk assessments to ensure project viability
• Coordinate and allocate project resources, including personnel, materials, and equipment
• Monitor project progress and ensure adherence to timelines, budget, and quality standards
• Collaborate with cross-functional teams to identify and resolve project issues
• Conduct regular project meetings to provide updates, discuss challenges, and make decisions
• Prepare and present project reports, including status updates and performance metrics
• Maintain effective communication with clients, contractors, and other external stakeholders
• Good knowledge or certified in WSH.

Requirements

• Bachelor's degree in electrical/electronic/mechanical engineering with 2 years of experience
• Excellent communication and interpersonal skills, both verbal and written in English.
• Good skills in using MS Office application and AUTOCAD
• Proven experience in project management, preferably in an engineering or construction setting
• Strong knowledge of project management methodologies and tools
• Solid understanding of engineering principles and construction processes
• Exceptional problem-solving skills and the ability to think critically.
• Strong organizational and time management skills with the ability to prioritize tasks effectively.
• Ability to work well under pressure and meet tight deadlines.
• Detail-oriented and able to maintain a high level of accuracy in all work activities.
• Excellent team player with the ability to collaborate effectively with cross-functional teams.
• Professional certification in project management is a plus.
• Familiar with relevant WSH certification courses for commercial and industrial areas.

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy