Job Description

• Prepare and review the design of the Mechanical Works, such as piping & equipment drawings, calculation and data sheets
• Involve in daily coordination with internal C&S and BIM team to resolve all the clashes, penetration etc
• Develop the work schedule and coordination of the project works to ensure project is on schedule
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of mechanical works
• Handle and resolve all site technical relating matters
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met
• Prepare all relevant checklist for Installation and Testing & Commissioning Works
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules
• Collaborate with internal stakeholders, clients, consultants, vendors and contractors
• Attend to clients’ comments and ensure clients’ approval & acceptance to all Mechanical Works related design, installation and Testing & Commissioning Works

Requirements

• Min degree in Mechanical Engineering
• 5 to 8 years of relevant experience in the construction industry. Working experience in water or wastewater industry will be an advantage
• Familiar with Auto CAD, Mechanical, Structure drawings and Microsoft Office
• Experience in design, installation, testing and commissioning of the mechanical works e.g. pipings, pumps etc
• Experience in Project Execution, Project Coordination, Supervising and Coordination with sub-contractors, consultant, and Client
• Good technical knowledge in understanding the Mechanical System
• Well versed in BIM software i.e. Bentley and Navisworks
• Team player with good interpersonal skills
• Meticulous and analytical with excellent problem-solving skills
• Highly motivated and able to work independently with minimal supervision

Job Description

• Interpret contract specifications, architectural standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manage budgets; write reports; and carry out additional administrative duties associated with the projects that are allocated
• Oversee architectural planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise and prepare construction and architectural documents and drawings
• Oversee architectural projects, communicate with clients and subcontractors regarding architectural issues, and guarantee the highest levels of architectural workmanship
• Provide the architectural designers with technical guidance on building requirements
• Organize and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in engineering
• Min 3 years of construction experience

Stork Gears & Services Asia Pte Ltd are an ISP for Rotating equipment from Europe which focuses mainly on Inspections, Repairs, Modifications and Overhaul of Gearboxes for both the Marine and Land based Applications. We have an OEM background, Rademakers, Conrad, Brevo, Kuypers, Jahnel Kesterman, but with an Independent service provider mind-set.

Stork is known for:

• Highly qualified and experienced engineers
• Highly Price competitive vs OEM
• In-house manufacturing critical parts
• On-site reverse engineering

Our service portfolio consists of:

• Diagnostics services
• Onsite services 24/7
• In-house engineering: design of gearboxes,
• Parts manufacturing (Impellors, shafts, gears)
• Custom built
• Workshop repair

Job description: (Field) Service Engineer

Purpose of the job

Responsible for the technical realization of projects, during the disassembly, assembly, inspection and repair, installation and commissioning of equipment, installations and related components.

Characterization

• Performs assignments/projects on the basis of requests from the project manager and project planning.
• Technical lead of the project team consisting of mechanics, (field) service engineers and subcontracted staff.
• Is responsible for maintaining the overview and ensures that the project is executed safely, in a structured manner, with a high quality standard and within planning and budget.
• Projects are performed at client sites (worldwide) or in the workshop. Often under time pressure and in unexpected or hectic circumstances.
• Flexibility: reachable and deployable, also on irregular hours.
• Realizes the most optimal technical solution and report on progress and the (technical) end result to the customer.
• Fulfills a leading role in respect of compliance with safety and environmental instructions, guidelines and policies of Stork and the client.
• Is highly specialized in installation & equipment technology and product knowledge.
• Service—oriented professional.

Tasks/Responsibilities

1. Authorizations

• Independently performing inspections, measurements, repairs, disassembly and assembly of installations, equipment and related components.
• Authorized to operate specialist machines and tools.
• Competent to specialist work based on required training.

2. Execution

• (dis)Assembly, inspection and repair of installations, equipment, related components and connected installations onsite, according to work instructions. Sets priorities on location and specific approach to the work; on site troubleshooting.
• Searches for the technical optimal solution with regard to costs and downtime.
• Responsible for the overview of the progress of the project on-site, ensuring that the project is carried out safely, in a structured manner, with a high quality standard and within planning and budget.
• Communicating the status and progress of the project to the project manager, adequately reporting possible scope changes.
• Self-starting and able to fully prepare, execute and complete the work independently both technically and administratively.
• Can deal very well with tight deadlines and can very well structure work in hectic and/or unexpected circumstances.
• Makes adequate protocols (if necessary) and technical reports.
• Works closely with other relevant departments so that the project can be delivered to the customer in accordance with the scope.
• Monitor and manage technical intellectual property if appropriate.
• Technical assistance and advice to internal and external stakeholders on use, maintenance, repairs, risks and possibly renewal of the installation.

3. Leading the team

• Managing the project team (on-site), ensuring that the project is carried out safely, in the agreed manner, with high quality and within the agreed timeframe.
• Detection of deviations, intervening if a deviation is detected.
• Coaching, supporting and guiding the project team on-site.
• Responsible for timely and adequate internal and external reporting and administration.
• Making and/or supervising correct use of: tools, machines, measuring instruments and other means of production.
• Maintaining equipment in good condition under applicable norms and regulations, timely reporting and/or solving in case of imperfections and malfunctions.
• Proactive in personal development and knowledge sharing within the team and organization.

4. Safety, quality and environment

• Is accountable for safety and quality aspects within the project.
• Meeting and monitoring the correct safety measures for a safe working environment.
• Report safety incidents and / or near misses in accordance with applicable procedure.

5. Others

• Responsible for maintaining contact with the client at an operational level.
• Actively participate in realization of additional work during development and execution of projects, technically assisting the sales department.
• Proactive relationship management; as ambassador encourage clients to purchase more services and / or products.
• Keeps knowledge up to date within his area of expertise (i.e. through keeping track of technological developments and/or professional literature).
• Assists in development of and test new methods, techniques and new services.

Knowledge and Skills

• Relevant technical education, i.e. mechanical engineering
• Relevant technical education; mechanical engineering or related
• Preferably services background
• Possesses required certifications
• Able to read schedules and mechanical engineering drawings
• Use and application of auxiliary tools and measuring instruments
• Fluent in English

Responsibilities:

• Understand Contract Specification.
• Understand Marine Class and Regulatory Requirement, Piping, Special Item and Valve Material Specification.
• Understand P&ID and Piping routines.
• Good knowledge in preparing Technical specification and Material take off (MTO).
• Review and comments technical proposal from vendor.
• Technical Bid Evaluation for procurement.
• Monitor procurement process to meet Project Schedule.
• Review vendor certified Document (VCD).
• Monitor piping bulk material usage, surplus material and warehouse balance utilisation.
• Interface with vendor, other discipline lead, procurement, production, commissioning.
• Attend factory acceptance test (FAT) if required.
• Able to perform piping procurement related activities with no or minimum supervision.

Requirements

• Prefer to have at least 5 years of piping engineering related working experience or similar activities as describe above.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies.

By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Understand contract and scope of work (i.e. SOW) and extracting the contract requirement into the checklist.
• Follow up FEED, P&IDs developed by consultant.
• Able to perform equipment sizing for pump required flow rate and pumping head together with NPSH verification.
• Able to perform piping line sizing.
• Able to develop system UFD/PFD.
• Able to create System Process Data Sheet.
• Develop/Update FPSO Hull common system related Topside, Safety, Hull marine systems in P&ID.
• Well understanding of common Class requirement such as ABS, LR and DNV Rules for marine system design.
• Well understanding of Equipment Isolation Philosophy and Specification from client.
• Well understanding of common piping material selection and application for marine system design as reference to International Standard.
• Able to incorporate the recommendations from the safety studies into the P&IDs and other relevant documents
• Able to review/comments technical proposal and vendor certified documents (VCD) from vendor (i.e. control valves specifications, PSVs specifications, etc.)
• Liaise with other discipline for relevant information that are needed for process design.
• Able to understand safety related drawing & documents (e.g. Safety Plan, Area Classification, Safety Signaling, Technical Specification for safety equipments, HSE Manual, Hydrant Location Study etc).
• Understand P&IDs and other related process, safety & instrumentation items
• Well understanding of the galvanic corrosion phenomena in the system design and able to avoid or resolve the galvanic corrosion related problems.
• Define control narrative and alarm set point for the instruments.
• System descriptions & all other kind of OIM (operation & maintenance manual)
• Sizing calculations (i.e. PSVs calculation, BDV calculations, SDV calculation, Control valves calculation).
• Carry out Hull Process related studies and prepare official report.
• Good knowledge in process simulation (PRO-II / HYSYS process simulator)
• Familiar System Design Safe Chart, Cause & Effect Matrix, Narrative Control Logic.
• Having knowledge to evaluate the relevant safety studies in FPSO design (i.e. HAZOP, HAZID, Radiation Study, Fire Explosion Study).
• Understanding of Working Environment Requirement and Human Ergonomic Design.
• Support commissioning activities and troubleshooting of system performance related issues.

Requirements:

• Prefer to have at least 5 years of Hull Process engineering related working experience or similar activities as describe above.
• Prefer to have experience in FPSO project, both topsides & marine.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8.00am - 5:15pm

Fri: 8.00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

The Field Service Engineer is responsible for providing technical expertise and support at customer sites within the maritime industry. This role involves installing, maintaining, troubleshooting, and repairing equipment and systems to ensure optimal performance and customer satisfaction.

Key Responsibilities:

Installation & Commissioning

· Perform installation, setup, and commissioning of maritime equipment and systems onboard vessels or at customer facilities.

· Conduct functional testing and calibration to ensure systems meet operational requirements.

Maintenance & Troubleshooting

· Diagnose and resolve technical issues on mechanical, electrical, and control systems.

· Conduct scheduled and preventive maintenance to minimize equipment downtime.

· Prepare detailed service reports and recommend corrective actions.

Customer Support

· Provide technical advice and training to customers to ensure proper system operation.

· Act as the primary point of contact for technical support during and after project completion.

Compliance & Documentation

· Ensure all work complies with industry standards, safety regulations, and company policies.

· Maintain accurate service records, inspection reports, and parts inventory.

Collaboration

· Liaise with internal teams (sales, engineering, and procurement) to ensure seamless service delivery.

· Provide feedback to improve product design, reliability, and customer experience.

The Lead Project Engineer is responsible for achieving project objectives within the defined time and cost framework while ensuring full delivery scope and quality. This role involves comprehensive project management, technical verification, and stakeholder communication to ensure customer satisfaction and successful project execution.

Key Responsibilities:

Project Objectives & Delivery

• Achieve project objectives within the defined time and cost framework.
• Ensure the delivery scope and quality meet the desired standards.

Customer & Stakeholder Liaison

• Liaise with the Customer, End User, and/or appointed Engineering Contractor.
• Ensure technical compliance with specifications.
• Technically verify customer requirements for order processing.

Project Management & Execution

• Manage projects within budget and on schedule until customer acceptance and hand-over.
• Oversee tender evaluation and provide Project Management support.
• Source third-party components and manage subcontractors.

Documentation & Data Management

• Manage documentation required by the project.

Team Leadership

• Lead and mentor other project team members when necessary.

Progress Reporting

• Report regularly to the Project Department Manager on project progress.

Responsibilities:

• Plan, design and supervise C&S engineering works (e.g. buildings, roads, drains, sewers, earthworks, underground buildings, temporary structures).
• Perform analysis and design for the project.
• Supervise the drafting of drawings related to design.
• Ensure all engineering works comply with relevant statutory standards, regulations and Codes of Practice.
• Manage project stakeholders, clients, design team, site team and other relevant parties.
• Coordinate with contractors, project team and design consultants.

Requirements:

• Possess a Civil and Structural Engineering degree recognized by the Professional Engineers Board of Singapore.
• Prior working experiences in structural engineering projects preferred.
• Familiar with structural engineering design to local Codes, Regulations and requirements,and Eurocode.
• Well verse in structural design software, e.g. ETABS, STAAD Pro, SAFE, SAP 2000, MIDAS, etc.
• Familiar with authority submission requirements for civil-structural works.
• Experience in design/project management works in BIM.
• Conversant with statutory code and requirements for site supervision, quality control procedure and construction administration.

Responsibilities:

1. To supervise and manage the functions of Repacking/Containment/ICW operations and Maintenance.
2. To monitor the safe process flow and backlog level of TIW waste.
3. Ensure all staff are well trained according to OJT programme and following the safe work procedures and SOPs.
4. To ensure the effectiveness and smoothness of coordination with operation and sales team and customer service maintaining high quality of services.
5. To monitor the outgoing containment purchase budget and encourage the recycling of used containment to save cost.
6. Daily and regular inspection of the operation processes and monitor the plant 5S and TPM activities, safety and discipline at works, machineries and equipment conditions.
7. Work with Lab chemists to evaluate and develop new treatment methods and handing procedures for new and unknown wastes, and review of operation costs and regular update to management.

Requirements:

• Degree in Chemical Engineering or Chemistry
• At least 2 year relevant experience

Remuneration:

• Basic salary: $3,400 – $3,800
• Company Transport / Transport Allowance $120 if candidate possess own transport
• Working Hours: Monday to Friday: 8am to 5pm
• AWS & VB
• Sign-on bonus

Job Responsibilities

• Developing and designing network architecture and computer systems infrastructure.
• Overseeing the development, installation, and administration of computer systems.
• Monitoring computer systems and networks for viruses, malfunctions, and errors.
• Analyzing network data and infrastructure to determine inefficiencies and problems.
• Plan, design and manage AWS cloud implementations.
• Evaluate cyber security posture and recommend improvement.

Job Requirements

• Bachelor’s degree in Computer Science / Information Technology / or similar field.
• Solid working knowledge of networking (e.g. CCNA), Windows Domain, Office 365 administration, AWS cloud technologies and network security.
• At least 3 years of systems and network engineering related experience.
• Good communication skills in English.
• Good communication skills in Korean will be an added advantage

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Description & Requirements

Duties & Responsibilities:

1.Preparation of construction schedule and monitoring of work progress.

2. Coordinate and supervise the civil work progress.

3. Resolve the problem arises on site to ensure timely completion of works

4. Conduct meeting with sub-contractors to update progress of work.

5. Ensure works are carried out in accordance. Update daily activities and manpower allocation.

6. Liaising with local authorities, client’s representatives and sub con and consultants.

7. Review project specifications, tender classification and construction drawings.

8. Involve in technical discussion and progress meeting

9. Assist project manager in daily works.

Qualifications

• Bachelor’s degree in Mechanical / Sewer Engineering approved by PE board.
• Min 4 years' Experience
• Experience in water pipe and best knowledge in laying water pipe
• Strong verbal, written, and organizational skills.

Other Details

Salary Range S$3,500 to S$7,000

performance bonus & variable bonus

Reporting to Project Head, you will be responsible for managing the full project execution in terms of scope, cost, schedule and quality. With strong project planning, cost control and time management skills, you will be overseeing a team of sub-contractors and working with various internal and external parties.

Job Description:

• Manage the full spectrum of project execution in terms of project scope, cost, schedule and quality from initial preparation stage until complete handover.
• Planning, cost control, work measurement and collection of performance data such as installed quantities, spent labour and other progress measurement data.
• Manages and tracks all changes, potential changes, ensuring estimated cost and schedule changes are given visibility to relevant parties.
• Provide regular reports inclusive of cost and schedule data to the top management.
• Works independently on complex project risk assessment issues, manage conflict, and provide resolution using a combination of technical skills, leadership, teamwork and people management skills.

Job Requirements:

• Minimum diploma holder in Engineering, Project Management, and other relevant majors.
• Experience to handle large and complex project in automation, logistics equipment and system, etc.
• Minimum 3 years of experience in Project Controls management relating to cost, scheduling and estimating at a project level.
• Knowledge of contracts and contract administration including its assessment and implementation at each phase of the project.
• Demonstrated ability to work with project teams to influence and achieve desired results.
• Proficiency in MS Office (spreadsheets, word processing, presentations, graphics) and Project Controls software.
• MUST be willing to travel for overseas project (Travel frequency 50%- 70%)

Responsibilities

· Carry out Electrical, Instrumentation, Control and Automation (EICA) design for water and wastewater treatment projects.

· Manage the procurement, costing and delivery of electrical software and hardware required

· Make automation programming according to clients’ technical specifications

· Arrange control panel assembly, testing, and installation at construction site

· Modification and Integration of new equipment / system with existing automation system

· Update of SCADA/HMI graphic to reflect new instruments/equipment and mapping these graphics to the corresponding field signals

· Attend to EICA breakdowns with diagnosis and solutions

· Attend meetings with subcontractors and clients for technical clarifications and arrangements.

· Coordinate with Project Managers to ensure deliverables are within the schedule.

· Keep records of EICA design, drawings, and document systematically

· Provide support and assistance to Sales Department and Maintenance Team

· Guide and educate junior EICA personnel.

· Other ad-hoc assignments.

Requirements

· Bachelor's Degree in Engineering (Computer/Telecommunication), Engineering (Electrical/Electronic) or equivalent.

· Minimum 3 years working experience at membrane base water treatment plant, preferably

· Proficient with Schneider / Siemens / Allen-bradley software

· Well-versed with SCADA and HMI

· Excellent communication skill

· Good personality and team spirit

· Customizes CMS database check sheets and allocation of check sheets based on latest engineering drawing revisions and punch list updates for mechanical/ electrical process/safety /HVAC discipline

· Prepares boundary drawings as per subsystem listing

· Prepares procedures/ work method statements and risk assessment for mechanical/electrical process/ safety/ HVAC commissioning activities

· Attends Factory Acceptance Test at vendors' premises, as required. (FAT)

· Leads a team of mechanical electrical technicians/ mechanics for preparation and site execution of pre-commissioning, commissioning and function testing of mechanical equipment and vendor equipment packages on the topsides

· Reviews commissioning shipped-loose items, consumables and spares for proper inventory and availability

· Reviews system / sub-system completion status for taking over from Construction Team as per commissioning schedule and priorities

· Liaises with various parties including vendor site representatives, where required, to ensure any issues affecting system completion are resolved in a timely manner

· Participates in system / sub-system joint inspections for taking over from Construction Team, punch listing activities,

· Able to travel oversea

· Prepares relevant documents required for safe energization of equipment such as Livening -Up Notice, CPTW, Isolation Lists, etc

· Ensures that commissioning testing activities are conducted safely and complies with the site PTW and safety regulations and procedures

· Reviews completed commissioning documentation such as check sheets, test procedures, red-line mark-up drawings, commissioning dossiers, etc.

· Follows up with relevant parties to ensure proper closure of outstanding issues arising from commissioning activities

· Ensure to maintain up to date punch close report

Requirements:

· Min. 3 years year of commissioning experience in the Oil & Gas/ marine industry.

· Experience in commissioning of Diesel Generators/ Compressors/ Pumps/ Piping systems / Utility packages/ cranes / mechanical handling equipment/ HVAC, etc

· Good knowledge and experience in commissioning activities of oil and gas/ marine facilities

· Familiar with permit-to-work systems and lock-out tag-out procedures

· Good analytical, problem solving and planning skills.

· Familiar with Project Specifications, Technical and HSE Standards

· Familiar with MS Office software applications (MS Outlook, Word, Excel, Power Point etc.

· Familiar with Completion Management System database such as PIMS-CMS / WinPCS / ProCoSys / ICAPS---(Optional or added advantages)

Working hours：

Monday –Friday: 8:30am – 6:00pm (Transport provided from Jurong East MRT to Office)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Purpose: Responsible for supervising staff, ensuring health and safety regulations at work are followed, making sure adequate training has been provided to the workers in the usage of equipment, and identifying deficiencies to be improved in production.

Key Area of Responsibilities:

• Supervising the man and assembly process, ensuring quality work is done safely and efficiently.
• Organize and motivate the mini-companies to perform daily production activities.
• Draw up training, and job rotation plans to develop manpower to be more flexible and competent and stimulate continuous productivity improvement.
• Liaising with other Engineers to develop plans that improve productivity, in terms of costs and manpower required.
• Support engineering/manufacturing teams, draw up safety protocols, report issues to the manager, and develop strategies to improve efficiency and profit.
• Take part in quality meetings with QA and process, conduct production CAB meetings, and ensure corrective actions are carried out.
• Conduct daily supervisor and production meetings to achieve delivery reliability.
• Record and report on the department’s activities and production results regularly in each productivity review meeting.
• Manage consumables and non-capitalized equipment spending.
• Maintain and ensure 5S housekeeping on the shop floor.

Qualification & Experiences:

• Diploma/bachelor’s in engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering).
• At least 3 years of experience as an engineer in the manufacturing assembly environment.
• Good communication skills to perform mentoring and coaching to production staff.
• Good knowledge in problem-solving methodology.
• Ensure the safety standards and process safety management is duly followed.

Duties & Responsibilities:

1.Preparation of construction schedule and monitoring of work progress.

2. Coordinate and supervise the civil work progress.

3. Resolve the problem arises on site to ensure timely completion of works

4. Conduct meeting with sub-contractors to update progress of work.

5. Ensure works are carried out in accordance. Update daily activities and manpower allocation.

6. Liaising with local authorities, client’s representatives and sub con and consultants.

7. Review project specifications, tender classification and construction drawings.

8. Involve in technical discussion and progress meeting

9. Assist project manager in daily works.

Qualifications

• Bachelor’s degree in Mechanical / Sewer Engineering approved by PE board.
• Min 4 years' Experience
• Experience in water pipe and best knowledge in laying water pipe
• Strong verbal, written, and organizational skills.

Other Details

Salary Range S$3,500 to S$7,000

performance bonus & variable bonus

Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. To carry out RBI inspections as per the codes and standards.
7. Perform QA/QC welding inspections at site.
8. Carry out coating inspections of equipment’s and piping.
9. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
10. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have bachelor or masters degree in mechanical engineering or equivalent.
2. Must have more than 10 years’ work experience.
3. Must have valid API 510, API 570, API 571 and API 580 Certificate.
4. Must have Senior Welding inspector certificate under AWS-SCWI or CSWIP 3.2.2.
5. Must have NACE level 3 or FROSIO level 3 certificate.
6. Must have NDT level II certificates in MPI, PT, UT and RT.
7. Must have previous shutdown inspection experience in Shell Seraya and Neste Singapore.
8. Knowledge in code book like AWS, ASME, API codes.
9. Must have good knowledge in coating inspections.
10. Must have a good knowledge about MT, PT, UT, RT Methods.
11. Must having an inspection experience in Exchanger, pressure vessels, piping and columns.

Job Description

• Online and Offline Partial Discharge Measurements for HV electrical assets such as cables , transformers, switchgears , motors and generators
• Offline Cable testings (Hi-pot test, Megger test, Tangent Delta test) above 6.6kV rated Cables
• Infra-Red Thermography for HV and LV Switchboards
• Lightning protection and earthing system measurement.
• Assist to servicing maintenance work by project teams.
• Handling of multiple test equipment from Omicron, Doble Engineering,Qualitrol, IRIS Power, EA Technology, HVPD, PDS, B2 and IPEC

Requirement

· Bachelor Degree in Electrical Engineering (Preferably SIT, NTU)

· Training will be provided and fresh graduates are welcomed to apply

· Good interpersonal and communication skill.

· Team player & able to work independently

Transport is provided from 6 MRT pickup points ie Paya Lebar, Serangoon NEX, Bishan, Jurong East, Joon Koon, Woodlands

13th Month & Variable Bonus

The Solutions Engineer is responsible for the installation, technical support and maintenance of software applications that help customers manage their manufacturing processes and improve production efficiency. He/She should have a deep understanding of the application's functionality and backend. He/She is responsible for interacting with the application users and setting up, and onboarding of the users. He/She collaborates with the sales team to promote products and services to meet customers needs and requirements. He/She is also familiar with the relevant software platforms on which the solutions are deployed and uses critical thinking skills to identify and solve problems. The job requires being on standby with on-call availability and travelling to overseas customer sites.

Key Responsibilities

• Execute a project or test cut for Aerospace and PM part
• Doing time study and making a fixture concept for Aerospace and PM HV part
• Provide machine operation training to customers.
• Provide on-site technical support to for pre sales activities
• Actively visiting customer for post sales support
• Preparing Aerospace sample for sales usage
• Runoff for HV PM
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma in Mechanical Engineering or equivalent
• Familiar with 3 or 5 axis CAM Programming and Process Development
• High level of interpersonal skills and integrity
• Solid team player
• Good communication skill
• Willing to travel overseas for long term

We are looking for Senior Plant & Machinery (Mechanical / Electrical) Engineers for:

Metal Shredder & non–ferrous separation / Metal Shear Plant

Waste Wood-To-Energy Plant

Responsibilities:

• Responsible for ensuring highest possible production and uptime in the scrap processing or WTE plant.
• Responsible for plant production and reliability / perform root cause investigations to increase reliability and general performance of machinery & equipment.
• Target for incident free and reliable operations, including timely and proper maintenance of systems.
• Responsible for implementing Maintenance Excellence by aligning with Best Practices.
• Ensure that preventive maintenance activities are proactively planned, prepared and scheduled with the required level of equipment reliability.
• Liaison with production team and other stakeholders; manage on-going maintenance activities.
• Ensure plant & machinery documentation and Preventive Maintenance (PM) procedures are constantly updated.
• Ensure technical, environmental and safety aspects in all matters are in compliance with the HSE regulations.

Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree, Engineering (Mechanical/Electrical) or equivalent.
• Required language(s): English & dialect (in order to communicate with dialect-speaking production team and other stakeholders to stay updated on the on-going operations & maintenance activities.)
• At least 2 Year(s) of working experience in the related field is required for this position.
• Required knowledge: hydraulic system, rotating parts, PLC systems, conveyor belts.
• Preferably Executive specialized in Engineering - Mechanical or equivalent.
• Required to work 5.5 days.

Engineer for the product development of door hardware products. (i.e. door closers and floor springs)

An experienced professional responsible for leading and executing entire product development cycles, from new concept design generation, concept and feasibility evaluation, detailed design to prototyping and testing until series production.

Job Responsibilities

• Product development for dormakaba’s surface-mounted and concealed door closers and floor springs.
• Develops and manages new product designs in accordance with project requirements, while adhering to project milestones and schedule.
• Conduct feasibility studies, FMEA, cost analysis and material selection to support design decisions.
• Collaborate closely manufacturers, and suppliers to address technical challenges through DFM & DFA and ensure successful implementation of designs.
• Prepare and present design proposals, progress reports, and project updates to stakeholders, while abiding to timely delivery within project’s budget.
• Utilizes SolidWorks software to generate detailed 3D models and technical drawings for prototypes and production.
• Setup test plans using DOE methodology, analyze test results and iterate design to meet performance and quality standards.
• Participate in team design reviews, providing constructive feedback and contributing to continuous improvement initiatives.
• Collaborate with cross-functional teams, such as manufacturing, quality assurance, and marketing.

Job Requirements

• Bachelor’s Degree in Mechanical/Material Engineering is required.
• Min 3 years’ design experience in a product development environment, contributing to a product’s successful delivery into series production will be preferred.
• Experienced in designing springs, custom gears (e.g. rack and pinion, worm drives), cam drives, bearings and hydraulic systems.
• Skilled in material selection for steel and aluminum, with expertise in manufacturing processes, including machining, cast iron / aluminum casting, metal forming and heat treatment.
• Knowledge in theoretical calculations related to the field of statics, dynamics and kinematics.