Job Description

• To act as Senior Civil Site Engineer for the construction of underground MRT Station
• Plan and Supervise ERSS and Deep Excavation works
• Supervise and ensure strict quality control
• Prepare and Review Technical Documents
• Keep record of all site activities and prepare daily site report
• Supervise any repair works
• Monitor and report progress of the works on site
• 60 hours per week working hours

Requirements

• Possess a Degree in Civil Engineering
• Master Degree in Civil / Strutural Engineering is preferred
• Very good experience in deep excavation, Earth Retaining Stabilizing Structures (ERSS), piling works (bored piles, sheet piles, soldier piles), pile load testing (ULT and PDA), ECM and pipe jacking works
• Relevant experience in ground improvement techniques (DCM, WSM, and JGP)
• Relevant experience in the construction of strutting works, Excavation, Secant Bored Pile, Diaphragm Wall
• Minimum 12 years of relevant experience in the above area

Job Responsibilities:

• To be involved in the planning and execution of civil and structural engineering works.
• Assist Management in monitoring and managing the day-to-day operation of the projects.
• To prepare method of statement, construction sequencing, sketches, and other technical submissions.
• To monitor the execution of the site works. To review and further develop the method and/or sequence of the works to ensure safety and efficiency.
• To assist in the preparation of RA/SWP and other safety documents.
• To collaborate with peers, and to liaise with trade contractors, clients and consultants and ensure timely delivery of quality services.
• To prepare Inspection and Test Plan, and conduct inspection and check on works performed.
• Check the drawings discrepancies and conduct field verification and submit technical clarification to the clients and consultants. Ensure updated drawings including shop drawings are used by the site team in a timely manner.
• Prepare site record and submit to office in a timely manner.
• Undertake ad-hoc duties as assigned by the management.

Requirements:

• Candidate must possess at least a bachelor’s degree in engineering (Civil) or equivalent from a recognized University accredited with the Professional Engineers Board, Singapore.
• Preferably with design, consulting experience and Improvement works to Surface Car Parks.
• Conversant with Eurocode or Local codes and regulations as well as submission procedures.
• Well knowledge in CAD, BIM and other Civil Engineering software is necessary.
• Good project management and ability to work independently and under pressure to meet tight schedules.
• Proficient in MS office applications and keen to learn new things.
• Good communication skills and able to interact with people of all levels and teamwork.
• Candidates with more years of experience may be considered for a senior role.

Position Overview:

We are looking for a motivated and skilled Mechanical Design Engineer to join our dynamic team. In this role, you will be responsible for designing, analysing and overseeing the structural integrity of mechanical systems and components for our products. These include specialty vehicles, engines and shelters. This role demands a strong understanding of mechanical design, vehicle systems, and relevant automotive and/or military standards, with a focus on ensuring high performance, reliability, and operational effectiveness.

Key Responsibilities:

· Develop and optimize mechanical designs for mechanical and automotive systems, focusing on efficiency, manufacturability, and sustainability.

· Collaborate with multidisciplinary teams, including electrical and software engineers, to create innovative solutions that meet customer needs.

· Utilize advanced CAD tools (such as SolidWorks) to create 3D models and detailed engineering drawings.

· Perform simulations and analysis to validate designs and ensure they meet performance and safety criteria.

· Create prototypes and conduct hands-on testing to gather data, evaluate performance, and refine designs.

· Participate in design reviews and contribute to brainstorming sessions to drive continuous improvement and innovation.

· Maintain thorough documentation of design processes, test results, and compliance with industry regulations.

· Stay updated on industry advancements and incorporate new technologies and methodologies into your work.

· Support manufacturing team with technical guidance to ensure smooth production processes and troubleshoot any design-related issues.

Qualifications:

• Bachelor’s degree in Mechanical Engineering or a related field. Master’s degree or higher qualification is a plus.
• At least 2 years of experience in mechanical design engineering, ideally within the automotive sector.
• Proficiency in 3D CAD software (e.g. SolidWorks) and familiarity with simulation tools (e.g. FEA, CFD).
• Strong knowledge of mechanical design standards, materials, and manufacturing processes.
• Excellent analytical and problem-solving skills with a focus on innovative solutions.
• Effective communication skills, both written and verbal, with the ability to collaborate in a team-oriented environment.
• Results-driven and detail-oriented mindset with a passion for engineering excellence and continuous improvement.

Preferred Skills:

• Strong communication and teamwork skills
• Experience with automotive and/or military vehicle standards and protocols
• Familiarity with vehicle system design and testing procedures.
• Knowledge of mechanical engineering principles as they apply to vehicle systems and structures.
• Experience with project management and leadership in a technical environment.

What we offer:

· Competitive salary and benefits package

· Opportunities for career advancement and professional development

· Collaborative work environment that fosters innovation and communication

· Mentorship and guidance on best practices in automotive and mechanical design

· Opportunity to work on exciting projects at the forefront of automotive technology

Job Description:

We are seeking a SoC Verification Engineer to test and validate System-on-Chip (SoC) designs. You will work with cross-functional teams to ensure chip functionality through verification using UVM, SystemVerilog, Python, and other cutting-edge tools.

Responsibilities:

• Develop verification plans for module and system-level testing.
• Collaborate with design engineers to address design defects and optimize chips.
• Set up virtual testing environments and develop test cases (direct and randomized).
• Analyze code coverage and functional coverage to ensure thorough testing.

Qualifications:

• Bachelor's degree in Electronics, Computer Science, or related field.
• 3+ years of experience in SoC verification.
• Strong knowledge of UVM, SystemVerilog, Python (TCL/Perl a plus).

Experience in IC Design Process and SoC/IP verification.

Job Summary:
We are looking for a highly skilled AI Chip Processor Core Verification Engineer to design, verify, and enhance AI processor cores. This specialized role demands deep expertise in hardware verification to ensure the functionality, efficiency, and performance of AI chips through systematic test planning and execution.

Key Responsibilities:

• Testplan Development & Verification:
  Develop comprehensive test plans, create and manage testbenches, and ensure thorough testing by analyzing code/functional coverage. Prepare detailed verification reports.
• Gate-Level Simulation:
  Conduct gate-level simulations to validate chip designs, generating and presenting simulation reports.
• Efficiency Improvement:
  Write and refine scripts (in Shell/Python) to automate tasks and enhance the verification workflow, improving overall efficiency.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Computer Science, or a related field.
• Technical Expertise:
  • Proficiency in UVM (Universal Verification Methodology) for testbench development.
  • Hands-on experience with Shell and Python scripting for verification tasks.
• Soft Skills:
  • Strong interpersonal and communication skills to work collaboratively with cross-functional teams.

Job Description

• Designs of electrical engineering service for building projects, and knowledge of mechanical engineering services
• Prepare tender documents, call tenders, evaluate tender returns and recommend tender awards
• Project management, coordination, supervisions, testing and commissioning for installations of mechanical and electrical engineering services during construction phases. This includes reviewing shop drawings, progress claims and variation claims.
• Engage in discussions with relevant authorities for preparations and submissions of plans
• Attend meetings with clients, contractors and suppliers
• Manage project through defined project scopes, detailed project plans & seek client’s agreements for sign-off
• Track project status and provide regular updates to ensure projects are on tracks
• Any other works as may be directed due to specific requirement of the projects

Job Requirements

• Bachelor's Degree in Electrical Engineering or related fields
• Preferably 1 to 5 years of working experience in designs, supervisions and implementation
• Experience in engineering consultancy or construction industry would be an added advantage
• Able to multi-task and work in fast-paced environment

As an EUV Photo Project Engineer in Operation Central Team (OCT) Central Process and Equipment Engineering (CPEE) Photo Scanner at Micron Technology, Inc., you will lead project activities to achieve and maintain outstanding EUV Ecosystem in high volume manufacturing.

You will be responsible for providing leadership to the global Micron network to drive Photo EUV Productivity, Hardware, Application, Value Engineering, Continuous Improvement Program, Cost reduction, TOR and BKM governance through technical expertise, business process management and project execution.
You'll be working closely with various teams like Process Equipment Engineering Groups, Technology Development, Procurement, and the Central Team, as well as interacting with equipment suppliers to address manufacturing issues. Effective collaboration with manufacturing sites, Quality Engineering, and other functional departments is key, with an exciting element of international travel to achieve your goals.
It’s a great opportunity for someone who enjoys challenges in State of Art Technology in EUV, teamwork and global experiences!

Responsibilities:

• Ensure a safety-first culture for all program and project solutions.
• Oversee the EUV Litho Cluster, including Scanner and Track installation, to meet TIQ (Tool Installation Qualification) goals.
• Close collaboration with EUV ecosystem suppliers (ASML, TEL, Edward Zenith, Zinter, etc) and internal partners (HVM fabs, Central Teams, Technology Development teams).
• Manage EUV Reticle support tools (e.g., Reticle inspection tools, Reticle Clean tools, EUV Reticle pod storage, Pod Clean tools etc) through closed collaboration with Fab and Central Reticle Teams.
• Drive EUV Industrialization goals by leading Supplier Workstream Programs (Eg: Scanner, Source, Drive Laser, TEL Track etc) to achieve industry outstanding performance in Imaging, Overlay, Rework, Defectivity, and Efficiency (Wafers Per Day).
• Drive and facilitate Governance meetings and cross-collaboration projects with internal and external partners to achieve Micron Strategic Initiatives (Eg: cost, yield, quality, Maxout, environmental sustainability).
• Demonstrate strong communication and reporting skills to provide regular Executive updates on project progress, challenges, and escalation for resource support.
• Oversee processes, guide initiatives, and lead project team members toward goal achievement using analytical skills and problem-solving techniques.
• Proactively identify bottlenecks, drive improvements, and share standard methodologies across HVM fabs.
• Demonstrate ownership and accountability in delivering results.

Requirements:

• Global Factory Network Expertise: Demonstrated understanding of worldwide high-volume manufacturing network operations across different geographical region.
• Leadership and Strategic Initiatives: Proven ability in team development and leading transformative initiatives.
• Manufacturing Knowledge: Familiarity with Front End (FE) manufacturing, reticle manufacturing, and fab processes.
• Project/Resource Management: Ability to manage Global Project and Resource.
• Effective Communication: Skilled at communicating effectively across various organizational levels.
• Customer-Focused Project Management: Proficient in project management with a strong customer focus.
• Continuous Learning Advocate: Continuous learning on the job and provide technical mentoring for peers.
• Minimum 4 years’ experience working as Photolithography Equipment/ Process Engineer or Photo Scanner Engineer in Wafer Fab. ASML EUV Scanner experience will be an advantage
• Bachelors/master’s degree in Electrical, Electronics, Mechanical Engineering

You will be responsible for providing leadership to the global Micron network to drive Photo EUV Productivity, Hardware, Application, Value Engineering, Continuous Improvement Program, Cost reduction, TOR and BKM governance through technical expertise, business process management and project execution.
You'll be working closely with various teams like Process Equipment Engineering Groups, Technology Development, Procurement, and the Central Team, as well as interacting with equipment suppliers to address manufacturing issues. Effective collaboration with manufacturing sites, Quality Engineering, and other functional departments is key, with an exciting element of international travel to achieve your goals.
It’s a great opportunity for someone who enjoys challenges in State of Art Technology in EUV, teamwork and global experiences!

Job Description:
We are seeking a skilled and motivated System Performance Engineer to join our team. In this role, you will develop and optimize operator libraries for large model inference, training, and fine-tuning processes. You will map operator library implementations to hardware, conduct performance analysis, and identify bottlenecks to maximize system efficiency and performance.

Key Responsibilities:

• Operator Library Development: Develop and optimize libraries for large model inference, training, and fine-tuning, ensuring efficient operation on hardware platforms.
• Performance Analysis: Analyze operator library implementations to identify and resolve performance bottlenecks, optimizing for memory usage, processing time, and data accuracy.
• Optimization Implementation: Engage in the software design and optimization of operator libraries, including instruction-level parallelism, to maximize hardware performance.
• Mapping to Hardware: Map operator library implementation to the underlying hardware, ensuring seamless execution and improved performance.
• Testing and Validation: Perform detailed testing, including memory usage and processing time analysis, to validate optimized library performance.

Qualifications:

• Educational Background: Bachelor’s degree or higher in Electronics, Computer Science, or a related field.
• Technical Expertise:
  • Strong understanding of large model algorithms and the principles behind their design.
  • Proficiency in computer architecture and many-core processor principles.
  • Practical experience in CPU performance optimization.
• Programming Skills: Expertise in C/C++ programming for performance optimization.
• Communication Skills: Excellent interpersonal and communication abilities to collaborate effectively within cross-functional teams.

Why Join Us?

• Work on cutting-edge technologies and contribute to the development of high-performance systems.
• Collaborate with a dynamic team of experts in semiconductor and hardware design.
• Make an impact on the performance of next-generation hardware systems.

• Oversee and manage the day-to-day operations of UAT environments
• Offer technical support to software development teams for application and testing needs
• Assist project management teams in various project-related tasks and activities
• Manage and maintain Windows and Linux server environments, ensuring optimal performance and security
• Perform infrastructure setup and deployment tasks for application environments, including configuration, provisioning, and deployment
• Handle account management activities, creating, modifying, and deleting user accounts and permissions
• Develop and maintain comprehensive documentation for application processes and procedures, including user guides, technical manuals, and standard operating procedures

Requirements:

Minimum 2 years of software development, testing, and support experience.

Strong proficiency in

• Database query languages (Oracle/MSSQL)
• SSH/SFTP client/server operations
• Public/private key and certificate management
• IIS web server administration, including certificate generation
• Linux server OS administration and command-line proficiency
• MSMQ messaging services
• Collaborative and independent software/IT project work

Strong proficiency in scripting for the following:

• PowerShell (Must Have).
• Windows Batch scripting (Must Have).
• VB scripting (good to have).

Additional Info:

• Company Location: East Side

To apply, please visit www.gmprecruit.com and search for Job Reference: 25029

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

We are seeking a highly skilled and innovative Executive Engineer, Mechanical to join our dynamic team in Singapore, Singapore. In this role, you will be responsible for designing and implementing cutting-edge mechanical engineering solutions for various building and infrastructure projects.

• Design and perform calculations for mechanical engineering works, including ACMV, fire protection systems, plumbing, and sanitary systems
• Conduct technical feasibility studies, life cycle analyses, and planning for building engineering projects
• Develop comprehensive study reports, design reports, and technical specifications for mechanical engineering projects
• Prepare detailed tender documents and evaluate proposals, providing thorough assessment reports
• Collaborate with cross-functional teams to ensure project goals are met efficiently and effectively
• Provide support in project management and contract administration for building engineering contracts
• Implement innovative mechanical engineering solutions while staying up-to-date with industry trends
• Troubleshoot and resolve complex mechanical engineering issues as they arise
• Mentor junior engineers and contribute to the overall growth of the engineering team
• Ensure compliance with industry standards and regulations in all project phases

1) Must be able to prepare shop drawings, fabrication drawings and as-built drawings for roller shutter doors.

2) Must be well experienced in designing submarine doors and submarine windows.

3) Must be highly adaptable to work at various jobsite, including exposure to outdoor working environments.

4) Flexible working arrangement but candidates must be willing to work long and irregular hours, including on weekends if projects are operational.

5) Must have working knowledge of AutoCad 2D & 3D.

6) Must have a 4 years Diploma.

7) Minimum 4 years experience in construction sites.

8) Only Singaporeans and PR need to apply.

At Avetics Global, we provide drone technology solutions and services to engineer impact to our clients.

As part of our team, you'll have the opportunity to contribute to exciting projects and gain hands-on experience.

Associate Electrical Engineer

Responsibilities

• Integration of Drones
• ⁠Perform equipment/engineering systems setup
• Perform testing/calibration of components and system
• Perform maintenance, repairs, and troubleshooting of drone
• Applying relevant electrical skills in preparation of components
• Assist in trial support

Requirements

• Minimium Diploma holder
• We welcome candidates with no experience to apply if you are familiar with soldering and crimping skills
• Preferably 1-2 years of soldering and crimping experience
• Team player
• Meticulous in producing high quality engineer work
• Being able to work independently
• Good time mangement skills
• Good problem solving skills,
• Ability to use engineering tools well and have a positive mindset to support troubleshooting
• Soldering and crimping skills

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Maintenance of building , facilities & security

Coordinate & execute , inspection , testing , general repair & Maintenance of site system

Liaise with contractor & supervise contractor on site

Company Transport Pick-Up to Company (2 ways)

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Software Engineer (SAP Specialist)

Responsibilities:

• Provide SAP Techno-functional Support in FI/CO or SD/MM/PM modules.
• Involve in analysis, design, coding / configuration and testing of SAP System.
• Work with business users to understand their business requirements
• Develop interfaces between SAP with external systems.
• Analyse the software issues, diagnoses the technical faults and suggest the precaution measures along with accurate troubleshooting methodologies
• Ensure safety practices and housekeeping is to be maintained to the highest standard

Requirements:

• Possess a Diploma/Degree in Computer Science / Information Technology or equivalent
• Knowledgeable in SAP and programming languages such as ABAP.
• Good interpersonal, analytical and problem-solving skills
• Minimum 2-3 years of relevant working experience is required

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Lead development of new process to recycle and reuse metal scraps.
• Research and develop process of upcycling metal scraps (titanium/aluminum alloy).
• Research recycling of 3DP metal powders and reduction of raw material cost.
• Provide development plan and risk mitigation for projects to management.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new material or new technology development.

Requirements:

• Masters / PhD in Materials Science, Metal Material Engineering or Analytical Chemistry.
• 2 years of relevant R&D working experience preferred.
• Have experience in metal material development and qualification in either mold, fixture or product.
• Possess knowledge in material characterization and metal powder production process.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

• Evaluate the potential consequences of changes to upstream and downstream systems.
• Develop and maintain programs (shell scripts, SQL scripts) adhering to coding standards and best practices.
• Follow the organization's SDLC processes, creating and updating relevant documentation.
• Participate in system design, review, and improvement, ensuring security and performance.
• Diagnose, troubleshoot, and resolve production issues, implementing both short-term and long-term solutions.
• Perform routine maintenance tasks, including disaster recovery drills and software updates.
• Provide ad-hoc support, data analysis, and troubleshooting to users.
• Manage, maintain, and optimize applications to meet service level expectations.
• Identify and implement improvements to enhance system performance and functionality.
• Coordinate and support production releases, including on-call and after-hours support.
• Proactively identify, assess, and escalate potential risks and issues.

Requirements:

• Hold a master’s or bachelor’s degree in Information Technology, Computer Science, Management Information Systems, Banking and Finance, or a related field.
• Have a minimum of 2 years of experience in MS SQL Server development, including work on SSIS packages, stored procedures, functions, and triggers.
• Demonstrate familiarity with the Software Development Life Cycle (SDLC) process.
• Exhibit strong problem-solving skills and thrive in a dynamic technical environment, with the ability to multitask and deliver high-quality solutions.
• Possess a comprehensive understanding of database management systems.

To apply, please visit www.gmprecruit.com and search for Job Reference: 25015

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

About us

Green Link Digital Bank is Singapore's inaugural wholesale digital bank focusing on supply chain finance, mainly serving MSMEs and aiming to help MSMEs grow and improve digitization.

We are looking for an Application Support Engineer to join our exciting team, to play a pivotal role in our banking technology division, responsible for ensuring the reliability, performance, and availability of critical banking applications.

Responsibilities

• Oversee the bank’s portfolio of applications, ensuring their stability, availability, and performance.
• Hands-on work on technical issue troubleshooting and ensure application functionality.
• Participate in the planning and execution of application upgrades and enhancements.
• Monitor system performance, track incidents, and proactively address potential issues.
• Ensure compliance with regulatory and security requirements for banking application.
• Continuously work towards making improvements in the release process.
• Provide regular reports on application support metrics and key performance indicators (KPIs).
• Support project team on DEV, SIT and UAT environment deployment and troubleshooting.
• Familiar with ITIL based Bank IT process, especially on incident, problem and change management.

Requirements

• Bachelor’s degree in computer science, Computer Engineering, Electrical Engineering, or related fields.
• 3 years of Technical/Application Support experience on multi technology platforms.
• Good knowledge on Linux OS, Windows Server, PostgreSQL, SQL Server, Oracle.
• Cross-platform experience and the expertise to identify and resolve integration issues.
• Excellent understanding of the CI/CD practice.
• Familiar with application release methodology.
• Experience in software development lifecycle and agile development methodologies.
• Experience working in a financial services institution with understanding of MAS technology risk requirements.
• Highly self-motivated to excel in assigned tasks and to deliver results for a digital bank.
• Good communication and coordination skills.
• Hands-on development experience is a plus.
• Excited to work in a fast-paced environment.

Responsibilities:

• Customises CMS database checksheets and allocation of checksheets based on latest engineering drawing revisions and punchlist updates for mechanical/ process/safety /HVAC discipline
• Prepares boundary drawings as per subsystem listing
• Prepares procedures/ work method statements and risk assessment for mechanical/ process/ safety/ HVAC commissioning activities
• Attends Factory Acceptance Test at vendors' premises, as required
• Leads a team of mechanical technicians/ mechanics for preparation and site execution of pre-commissioning, commissioning and function testing of mechanical equipment and vendor equipment packages on the topsides
• Reviews commissioning shipped-loose items, consumables and spares for proper inventory and availability
• Reviews system / sub-system completion status for taking over from Construction Team as per commissioning schedule and priorities
• Liaises with various parties including vendor site representatives, where required, to ensure any issues affecting system completion are resolved in a timely manner
• Participates in system / sub-system joint inspections for taking over from Construction Team, punch listing activities, etc
• Prepares relevant documents required for safe energization of equipment such as Livening -Up Notice, CPTW, Isolation Lists, etc
• Ensures that commissioning testing activities are conducted safely and complies with the site PTW and safety regulations and procedures
• Reviews completed commissioning documentation such as checksheets, test procedures, red-line mark-up drawings, commissioning dossiers, etc.
• Follows up with relevant parties to ensure proper closure of outstanding issues arising from commissioning activities

Requirements:

• Min. 5 years years of commissioning experience in the Oil & Gas/ Wind Farm industty
• Experience in commissioning of Diesel Generators/ Compressors/ Pumps/ Piping systems / Utility packages/ cranes / mechanical handling equipment/ HVAC, etc
• Good knowledge and experience in commissioning activities of oil and gas/ wind farm facilities
• Familiar with permit-to-work systems and lock-out tag-out procedures
• Good analytical, problem solving and planning skills.
• Familiar with Project Specifications, Technical and HSE Standards
• Familiar with MS Office software applications (MS Outlook, Word, Excel, Power Point etc.
• Familiar with Completion Management System database such as PIMS-CMS / WinPCS / ProCoSys / ICAPS

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Amiralty Yard)

60 Admiralty Road West, Singapore 759947

(Tuas Yard)

51 Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Company’s Profile:

Our client is an international technology and engineering company that specialises in providing smart city solutions through advanced techology. They are well-known for their dedication of quality smart utilities to their esteemed clients. They are looking out for an Electrical Engineer to join their team and contribute to their ongoing success.

Location: Ang Mo Kio/Yio Chu Kang area (project location at East side)

Job Responsibilities:

• Supervising/ monitoring of sub-contractors work and ensuring safety practices are followed.
• Discuss with PM/HOD for site problems and technical difficulties.
• Liaise with affiliated parties for smooth execution of work on site.
• Material tracking to ensure sufficient materials are readily available for installation.
• Carry out inspections of incoming materials and equipment deployed to work site.
• Conduct quality checks of sub-contractor/ vendor works daily.
• Handle site inspection with client/main contractors representatives and updates site installation progress.
• Update drafter on site changes and as-built drawings.
• Arrange and obtain for permit to work before execution of site.
• Ensure all project documentation are properly kept and filed.

Requirements:

• At least 1 - 2 years’ Assistant/Electrical Engineer experience
• Proficient in the understanding of MEP/ construction drawings
• Education qualification in Electrical Engineering or equivalent

Interested candidates may whatsapp your resume to 6421 4965. Only shortlisted applicants will be contacted.

Cassie Chan | R2197426

Talentsis Pte Ltd | EA No: 20C0312

• Design, develop, implement, and maintain software systems.
• Collaborate with team leads to understand client needs, assess technical implications, and estimate project timelines.
• Create, update, and review technical documentation.
• Oversee offshore teams, ensuring adherence to quality standards and technical guidelines.
• Review code for potential issues, conduct unit and integration testing, and support user acceptance testing.
• Develop deployment strategies, support production environments, troubleshoot issues, and implement corrective actions.
• Perform other tasks as assigned.

Job Requirements:

• Bachelor's degree in Computer Science or Information Technology with at least 5 years of software development experience using Java (J2EE, Spring Framework) and frontend technologies (JavaScript, Angular, AngularJS), preferably in a banking or financial setting.
• Experience working with offshore teams.
• Hands-on experience with deploying and managing cloud-native Java applications on Microsoft Azure.
• Knowledge of the Newgen BPM system.
• Strong understanding of software development life cycle methodologies, including Waterfall and Agile.
• Excellent communication, presentation, and interpersonal skills.
• Self-motivated, proactive, and able to work independently or as part of a team. Demonstrates a strong sense of responsibility and ownership.

To apply, please visit www.gmprecruit.com and search for Job Reference: 24991

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

Responsibilities

• Diagnose and solve technical problems on semiconductor machinery and systems, such as computer setups, advanced software, or networked/wireless systems.
• Carry out on-site installations, continuous improvement initiatives, parts overhauls, preventative maintenance, equipment modifications, and repair work.
• Act as the main point of contact between the company and the customer for both administrative and technical matters related to assigned projects.
• Organize logistics and coordinate with customers on equipment-related issues.
• Address customer complaints, offering timely solutions to resolve their issues.
• Track product performance, providing regular updates and feedback on customer service requests.
• Report recurring customer concerns to management to help prevent future issues.

Requirements:

• Minimum of 2 years of related experience in Semiconductor Industry
• Possess at least a Diploma/Degree in Electrical or Electronic Engineering
• Good time management skills, ability to meet deadlines, and strong attention to detail
• Good team player with the ability to work independently

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXV54V53

We are looking for a skilled IT Security Engineer to join our client for a 1-year direct contract. The successful candidate will bring strong expertise in information security and hands-on experience managing security projects from start to finish.

Responsibilities:

• Lead and execute security projects across various domains, including endpoint, network, and application security.
• Implement and manage security tools, such as Web Proxy, Endpoint Protection, Email Security, and Vulnerability Scanners.
• Assess system security through threat modeling and propose effective solutions.
• Explore and integrate emerging security technologies to strengthen the organization’s security posture.
• Collaborate with teams to ensure secure deployment and operation of cloud environments.

Requirements:

• Bachelor’s degree in Computer Science, Computer Engineering, Information Security, or a related field.
• 5 years experience in IT Security, with deep expertise in one or more security domains.
• 3 years hands-on experience in end-to-end IT security projects or project delivery.
• Familiarity with security tools and frameworks.
• Security certifications (CISSP, CISM, AWS Certified Security, etc.) are highly desirable.
• Experience with cloud security is an added advantage.
• Thrives in fast-paced and demanding environments.

This role is a great opportunity to work on impactful security projects in a dynamic environment.