Responsibilities:

• Work closely with other members of the team to develop software solutions to grow the P&L
• Design, develop and own high-performance solution stacks
• Maintain, monitor, extend and optimize existing trading systems
• Contribute to the firm’s technical roadmap
• Contribute to inter-team and cross-team efforts to ensure success of the business
• Provide L3 support for production issues

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Engineering or similar disciplines
• Familiarity with Linux operating systems
• Good communication skills
• Interest in financial markets (with at least a basic understanding of cryptocurrencies)
• Must be able to multitask and work with minimal supervision
• Good grasp of software engineering principles
• Ability to translate non-technical requirements into technical tasks
• Good understanding of low-to-high level testing and performance optimization principles, statistical performance measuring and test-driven development approaches
• Understanding of low-level performance tuning concepts (e.g. microprocessor architecture, Linux kernel, networking, blockchain architecture)
• Experience working on high performance, low latency trading systems is a must
• Proficiency in Python and/or C++ preferred
• Knowledge of SQL and NoSQL (e.g. Redis, Mongo, Timescale) is a plus
• Knowledge of other technologies such as CI/CD, Docker and Kubernetes is a plus
• Familiarity with cloud computing services is a plus

Job Description

• Lead and manage the electrical engineering design works.
• Prepare and review the design of the electrical works, e.g. equipment sizing, cable sizing and voltage drop calculation, power system study, electrical layout single line diagram, schematic drawings, etc.
• Handle equipment packages and procurement including technical specifications, technical clarification, technical bid analysis, etc.
• Develop cost estimates for electrical equipment and electrical works.
• Develop work schedule and coordination of the project works.
• Review the sub-consultants, sub-contractors and vendors' design and submission, ensuring all project specifications and design standard are met.
• Prepare all relevant checklists for installation, testing and commission works.
• Collaboration with multiple stakeholders including internal teams of different trades, clients, consultants, other packages, sub-contractors, and vendors.
• Attending to client's comments and ensuring client's approval and acceptance of all electrical works related design, installation, testing and commissioning works.
• Handle and resolve all site technical related matters.

Requirements

• Bachelor Degree in Electrical Engineering
• 5 to 8 years of relevant experience in construction industry. Working experience in water or wastewater industry will be an advantage.
• Experience in design, installation, testing and commissioning of electrical works, e.g. high voltage system, low voltage system, transformers, motor starters, cabling works, earthing and lightning protection system, etc.
• Experience in project execution, project coordination, supervision and coordination
  with clients, consultants, and all other sub-tier under the Contractor.
• Good technical knowledge in electrical system.
• Well verse in power system analysis software e.g. ETAP and BIM software e.g. Bentley, Revit and Navisworks.
• Team player with good interpersonal skills.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and able to work independently with minimal supervision.
• Will be required to work full time at project site.

• Supervise a team of Service Engineers in delivering a wide array of technical after-sales service support, including installation, commissioning, repairs, and preventive maintenance plans for laboratory and hospital infrastructures, as well as research and analytical equipment within the medical imaging sector.
• Additionally, offer technical consultation to customers, address their requests by troubleshooting issues, and implement corrective measures within the designated timeline, while also preparing service reports.

What are we looking for?

• Minimum Degree in Electronics, Electrical, Mechanical Engineering, or a related field is required.
• Candidates should have at least 6 years of pertinent technical experience in service and maintenance.
• A valid Class 3 driving license, along with ownership of a personal vehicle, will serve as a significant advantage.

Next Step:

Please submit your updated resume in MS Word format by clicking the QUICK APPLY button.

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Liew Jie Ru

EA Licence No: 24C2293

Company’s Profile

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with more than 15,000 engineers globally supporting projects. They have an international presence in over 100 countries worldwide and are looking out for Assistant Engineers (Piping and Instrumentation) to join their team and contribute to their ongoing success.

Location: East

Working hours: Monday to Friday, Standard Office Hours

Responsibilities:

• Be well-informed and understand MEP or construction drawings.
• Discuss with PM/HOD for site problems and technical difficulties.
• Monitor sub-contractors / vendors work, conduct quality checks on their work daily and ensure safety practices are followed.
• Track materials to ensure sufficient materials are readily available for installation.
• Inspect incoming materials and equipment deployed to work sites.
• Go for site inspections with client/main contractors representatives and update progress.
• Keep drafter updated on site changes and as-built drawings.
• Arrange and attain permit to work before execution of site.

Requirements:

• Min. NITEC/ Higher NITEC in Electrical Engineering or other engineering fields.
• Min. 1 year experience in building, construction or engineering industry.
• Electrical engineering background is preferred.
• Possess BCSS certification - Building Construction Supervisor Safety or Supervise Construction Work for WSH is a plus.

Your recruiter for this job: WhatsApp Celine @ 6421 4966 for a quicker response.

Connect with me on LinkedIn: www.linkedin.com/in/your-recruiter-celine-chan

Celine Chan | R21103433

Talentsis Pte Ltd | EA No: 20C0312

Job Description

• Work along with the Project team in the DevOps environment.

• Guiding the continuous integration, continuous deployment and continuous testing.

• Work closely with the development team and operation team to create DevOps strategy and toolset that suits the individual squads.

• Setup, deploy and maintain scalable, high availability systems

• Perform and automate deployment and security hardening of systems

• Automate and build up scalable containerised systems/environment using latest technologies (e.g. Redhat Openshift, MLOps tools, etc)

• Automate security hardening in testing, deployment and production setup based on industrial best practices

• Setup and maintain CI/CD, automated testing, development and delivery environments

• Writing scripts/programs for service monitoring and health check of systems

• Day-to-day monitoring, backup, deployment and maintenance of systems

About You:

• Experience with cloud orchestration, configuration management and auto-scaling techniques

• Experience on building and developing CI/CD pipeline and workflow (Gitlab CI/CD preferred)

• Experience on building and managing container image pipeline

• Experience with automation tools such as Ansible/Terraform

• Experience with installation and configuration of Redhat SSO

• Experience with load balancing setup for TCP/IP, HTTP, DNS, routings

• Knowledge of IT security standards, such CIS

• Good hands-on experience on using Infra-as-a-Code for configuration management and application deployment

• Overall knowledge on one or more of the following programming languages (Java, Python)

• Knowledge on continuous integration, test automation, version control, and software configuration management.

• Knowledge of machine learning and setup of MLOps tools such as H2O

Desired Background:

• Diploma/Degree in Electrical Engineering, Computer Science, Communications Engineering or equivalent

• Minimum 3 years in software development industry or server infrastructure setup

• Experience in software-defined infrastructure (OpenStack).

• Experience with infrastructure provision tools (Docker, Ansible, etc).

• Good understanding of hardware infrastructure systems (network switches, firewalls, routers etc.) and Linux operating system.

• Basic understanding of DevOps principles and practices. Knowledge in DevSecOps will be an added advantage.

• Self-motivated and good communication skills. Good hands-on experience on using AWS Cloud Formation scripts for configuration management and application deployment.

• At least 1-year experience working closely with infrastructure. Experience in Linux, Windows, network troubleshooting is a plus,

• Experience on working in an Agile environment, in a close collaboration with developers, Knowledge on continuous integration, test automation, version control, and software configuration management

• Excellent communication skills.

EA Number: 11C4879

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

At TikTok, our people are humble, intelligent, compassionate and creative. We create to inspire - for you, for us, and for more than 1 billion users on our platform. We lead with curiosity and aim for the highest, never shying away from taking calculated risks and embracing ambiguity as it comes. Here, the opportunities are limitless for those who dare to pursue bold ideas that exist just beyond the boundary of possibility. Join us and make impact happen with a career at TikTok.

Team Introduction

TikTok’s Product data scientist team is a critical component of the platform’s success, responsible for leveraging data to enhance user experience, optimize content delivery, and drive business decisions. As a leading social media app known for its short-form video content, TikTok relies heavily on data science to stay ahead in a competitive market.

Job Description

1. Lead and execute the local service data analysis project of international short videos, help business teams solve problems encountered in POI product construction through analysis, and achieve business goals.
2. Deeply understand user preferences, POI usage, and decision-making psychology, discover the essential needs and pain points of the business through targeted exploratory analysis, find opportunities for improvement/efficiency, provide specific feasible optimization suggestions, promote implementation, and bring actual business improvement.
3. Responsible for formulating and optimizing various product/operation strategies, user decision attribution, A/B experiment design and analysis, abnormal analysis of core indicators, guiding scientific decision-making and iterative closed-loop, promoting the implementation and continuous optimization of data analysis conclusions.

Minimum Qualifications

1. Bachelor's degree or above, with more than 3 years of work experience.
2. Experience in local life, e-commerce, and other related industries is preferred, with a background in data science, quantitative analysis, such as long chain attribution, statistics, computer science, economics, etc.
3. Possess data analysis capabilities to solve complex problems, design data collection schemes, excellent communication and coordination skills, and cross-departmental team collaboration abilities.

Preferred Qualifications

1. Good at thinking and summarizing, able to continuously improve work methods.
2. Able to quickly understand business logic, quantify the causes and effects of business problems through data, and provide specific feasible optimization solutions.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Job Description

• Industry/ Organization Type: Manufacturing/ Production (Precision Engineering)
• Position Title: Procurement Engineer
• Working Location: Kaki Bukit
• Working Hours: 5 days (Mon – Fri, 8am – 5.30pm)
• Salary Package: Up to $4,500 + AWS
• Duration: Permanent

Key Responsibilities

• Report to Operations Manager.
• Obtain quotations and purchase raw materials, components, and assign secondary processes to subcontractors.
• Update approved machining subcontractor quotations in the system.
• Issue and manage Work Orders and Purchase Orders.
• Source materials, components, and plating for cost reduction.
• Perform evaluations for company purchases and assist with assigned duties.
• Collaborate with the group sourcing team on procurement evaluations.
• Develop and manage the Supply Chain Management plan.

APPLY NOW!!!

• At least Diploma in Mechanical Engineering with 1 year of related working experience. Preferably from the Manufacturing industry.
• Proficient in Microsoft Office is a must.
• Experience with CRM tools (such as Salesforce) would be beneficial.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71172 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: QA Engineer / Quality Assurance Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that ISO13485 and FDA 21 CFR Part 820 systems are adequately maintained, and continuous improvements are implemented
• Coordinate with various functions to ensure awareness and understanding of the Quality Management System.
• Plan and coordinate gap analysis exercises and provide advice on bridging the gap
• Manage and oversee quality audits by plan and ensure quality audits findings and recommendations are rectified and implemented
• Apprise management of quality audit findings and corrective actions taken
• Ensure that the procedures and processes prescribed by the Quality Management System are in place and implemented per requirement
• Review the Quality Management System periodically to assess continued suitability and areas of possible improvement
• Arrange for ISO13485, ISO14971 and FDA 21 CFR Part 820 awareness training and further refresher training as needed
• Coordinate and plan work of external audit such as Customer, ISO certification and Regulatory bodies
• Ensure that systems and procedures are in compliance with ISO13485, ISO14971, FDA 21CFR Part 820, and GDP requirements
• Mentor / supervise as assigned and ensure timely and accurate completion of quality projects
• Support Plant wide audit/ inspection activities and special projects, as assigned
• Able to travel for suppliers/customers visits
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Bachelor’s Degree in Quality Management or Electronics Engineering
• At least 3 years of working experience in Quality Management Systems, and in a manufacturing environment
• Excellent hands-on knowledge of Quality Management Systems primarily in ISO 13485 and FDA 21 CFR Part 820
• Lead, mentor and facilitate problem-solving and quality improvements
• Establish controls system required in ISO13485 & FDA registered facility
• Strong communication and interpersonal skills
• FDA Inspection experience preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65191 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

- Conduct routine inspection and evaluates their condition and recommend proper execution during work activities.

- Prepare project schedule and presentation of project.

- Lead the kick of meeting.

- Resposible of project management and quality control.

- Prepare & review Civil and Structural drawing.

- Prepare Quantity Take-off of Civil and Structural Materials for BOQ.

- Prepare bid documents for Civil and Structural Project.

- Witness Dimensional Checking during erection & construction.

- Control and check all fabrication activities.

- Maintain welder performances and welders repair.

- Conduct final walk through inspection and monitor rectification of final punch list item. Safety aspects on construction is defined in safety assurance, procedure and thoroughly implemented.

Requirement:

- Minimum 4 years Experiences in Civil and Structural sector in SG process plant.

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Lead development of new process to recycle and reuse metal scraps.
• Research and develop process of upcycling metal scraps (titanium/aluminum alloy).
• Research recycling of 3DP metal powders and reduction of raw material cost.
• Provide development plan and risk mitigation for projects to management.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new material or new technology development.

Requirements:

• Masters / PhD in Materials Science, Metal Material Engineering or Analytical Chemistry.
• 2 years of relevant R&D working experience preferred.
• Have experience in metal material development and qualification in either mold, fixture or product.
• Possess knowledge in material characterization and metal powder production process.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

Leading provider of semiconductor equipment

Senior Design Engineer

Responsibilities:

• Manage mechanical design team

• Ensure mechanical design process meets schedule

• Conduct transforming, conceptualization and design review session with internal design team

• Continuous review, development, enhance and improve company products

• Provide technical support and solutions to products inquiry

Requirements:

• Degree in Mechanical, Mechatronics Engineering or equivalent

• Minimum 8 years of design experience in factory automation design

• Minimum 3 years in design supervisor experience

• Experience in semiconductor equipment handler will be an added advantage

• Analytical minded with strong organizational skills

• Proficient in using 3D software

• Able to effectively, interact with a variety of personnel at all organizational level and customers

Interested applicants, please email detailed updated resume in MICROSOFT WORD format and indicating your current salary and expected salary to:

[email protected]

David Lim

Principal Consultant/Manager

Registration No.: R1102027

[email protected]

FA Search Pte Ltd (lic no. 07C4794)

Tasks:

● Develop and implement SLAM algorithms for accurate simultaneous localization and

mapping of autonomous robots in outdoor environments..

● Integrate sensor data from various sources (lidar, cameras, IMUs, wheel encoders) to

improve SLAM performance and accuracy.

● Utilize calibration techniques to ensure accurate sensor data fusion for SLAM.

● Collaborate with other team members to ensure overall system integration and

functionality.

Education:

● A bachelor's or master's degree in Robotics, Computer Science, Electrical

Engineering, or a related field is typically required.

Technical Skills:

● SLAM algorithms: Proficiency in developing and implementing SLAM

techniques such as EKF-SLAM, Graph SLAM, or FastSLAM.

● Sensor fusion: Experience with integrating data from sensors such as lidar,

cameras, IMUs, and wheel encoders for accurate localization and mapping.

● Robotics: In-depth understanding of robotic systems, kinematics, dynamics,

and control theory.

● Programming languages: Proficiency in languages commonly used in

robotics, such as C++, Python, or ROS (Robot Operating System).

● Simulation tools: Experience with robotic simulation frameworks like Gazebo

or V-REP.

● Problem-solving and analytical skills: Strong analytical and problem-solving

abilities are vital for identifying issues, debugging complex systems, and

proposing effective solutions.

● Communication and teamwork: Excellent verbal and written communication

skills to collaborate with cross-functional teams, document technical

specifications, and present findings effectively.

Experience:

● SLAM implementation: Prior experience in developing SLAM algorithms and

systems for autonomous robots.

● Sensor integration: Knowledge of integrating sensor data from various

sources to improve SLAM performance.

● ROS: Practical experience with the Robot Operating System (ROS) for robotic

software development and integration.

Responsibilities

• Ensuring all sub-contractors comply fully with the relevant recommendations of LTA M&W requirements
• Preparing and submitting the Weekly & Monthly Quality reports.
• Follow up with conformity certificate, calibration certificate and plant calibration certificate from other agency.
• Maintaining the RIN Register and follow up with QPS for closing.
• Review daily inspection report and issuance of observation or NCR (Non Conformity Report) according to concerned department.
• To arrange QPS for inspection including the reinforcement cages, sitting out, guide wall, slurry quality (powder moisture, slurry density, viscosity & gel strength), final depth pf trench,trench profile check (koden alignment check), stop end, inserts, concrete slump, temperature, casting duration, cut-off level, ground level, backfilling (LSS) and lean concrete.
• To be physically present during Asphalt pavement work for Road diversion work.
• Study Shop drawing and liaise with design department on the design issue that may cause difficulty in production.
• To conduct mould inspection for every new mould and mould in use.
• Materials ordering
• To arrange production based on Daily Production Planning from planning department.
• Responsible for achieving the daily planned volume/productivity.
• To prep our inspection together with production supervisor and RTO

Requirements

• Degree in any Engineering Discipline
• Minimum 5 years experience in QA/QC works in railway construction, with at least 1 year LTA MRT experience.
• Experience in structural steel works or precast RC works
• Good interpersonal skills and communication skills
• Open to 6D work week with long working hours to meet tight project deadline.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: QA Engineer / Quality Assurance Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that ISO13485 and FDA 21 CFR Part 820 systems are adequately maintained, and continuous improvements are implemented
• Coordinate with various functions to ensure awareness and understanding of the Quality Management System.
• Plan and coordinate gap analysis exercises and provide advice on bridging the gap
• Manage and oversee quality audits by plan and ensure quality audits findings and recommendations are rectified and implemented
• Apprise management of quality audit findings and corrective actions taken
• Ensure that the procedures and processes prescribed by the Quality Management System are in place and implemented per requirement
• Review the Quality Management System periodically to assess continued suitability and areas of possible improvement
• Arrange for ISO13485, ISO14971 and FDA 21 CFR Part 820 awareness training and further refresher training as needed
• Coordinate and plan work of external audit such as Customer, ISO certification and Regulatory bodies
• Ensure that systems and procedures are in compliance with ISO13485, ISO14971, FDA 21CFR Part 820, and GDP requirements
• Mentor / supervise as assigned and ensure timely and accurate completion of quality projects
• Support Plant wide audit/ inspection activities and special projects, as assigned
• Able to travel for suppliers/customers visits
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Bachelor’s Degree in Quality Management or Electronics Engineering
• At least 3 years of working experience in Quality Management Systems, and in a manufacturing environment
• Excellent hands-on knowledge of Quality Management Systems primarily in ISO 13485 and FDA 21 CFR Part 820
• Lead, mentor and facilitate problem-solving and quality improvements
• Establish controls system required in ISO13485 & FDA registered facility
• Strong communication and interpersonal skills
• FDA Inspection experience preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65191 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Job Description

• Industry/ Organization Type: IT / Software
• Position Title: Data Center Engineer
• Working Location: Boon Lay
• Working Hours: 5 days, Mon – Fri (Morning Shift 6 AM – 2 PM / Afternoon Shift 2 PM – 10 PM)
• Salary Package: Basic Salary up to $5,000 + AWS + Bonus
• Duration: Permanent Role

Key Responsibilities

• Perform periodic walk-through, validation of equipment status, amber lights check, etc.
• Review work order requests in the queue and respond to semi-routine work orders by adhering to commitment times.
• Escalate and expedite orders to appropriate teams upon standard operating procedures.
• Rack and stack semi-routine customer equipment tickets.
• Support datacenter standard operating cross-connect work order requests.
• Support standard operating testing and standard operating installations of customer assets.
• Support standard operating procedures of layer 1 cross-connect certification testing.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma / Degree in IT/Computer Science, or related field.
• Minimum 1 year of IT experience or equivalent.
• Prior working experience in a Data Center, Network or Server environment would be an added advantage.
• Must be comfortable with shift rotation.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66104 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Assistant Service Engineer/ Service Engineer
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $3800 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair & maintenance of commercial cleaning equipment; e.g. road sweepers, ride-on auto-scrubbers etc.
• Must be able to perform troubleshooting on various electrical circuitry.
• Able to lead a team of technicians to provide excellent service support.
• All other assigned duties.

APPLY NOW!!!

• Minimum Diploma (Electrical Engineering) with expertise in AC & DC motors, single-phase & three-phase systems, lead acid & lithium batteries, electrical control circuits, and hydraulic systems.
• Minimum 1 year of experience in customer support and in repairing heavy industrial equipment.
• Possess a Class 3 driving license or equivalent.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65054 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Assistant Service Engineer/ Service Engineer
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $3800 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair & maintenance of commercial cleaning equipment; e.g. road sweepers, ride-on auto-scrubbers etc.
• Must be able to perform troubleshooting on various electrical circuitry.
• Able to lead a team of technicians to provide excellent service support.
• All other assigned duties.

APPLY NOW!!!

• Minimum Diploma (Electrical Engineering) with expertise in AC & DC motors, single-phase & three-phase systems, lead acid & lithium batteries, electrical control circuits, and hydraulic systems.
• Minimum 1 year of experience in customer support and in repairing heavy industrial equipment.
• Possess a Class 3 driving license or equivalent.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65054 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing/Construction Machinery
• Position Title: Service Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8.15 am – 5.15 pm
• Salary Package: Up to $4,000 + AWS + Meal Allowance + Company Transportation/Transport Allowance + OT
• Duration: Permanent

Key Responsibilities

• Conduct product delivery training for distributors and customers.
• Provide diagnosis guidance and analysis of fault found to Distributor / End-user, remotely via emails and/or calls.
• Carry out field services at sites in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team in locating correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.

APPLY NOW!!!

• Minimum Diploma in Mechanical/Mechatronics Engineering or relevant studies.
• With at least 2 years of relevant working experience in construction machinery industry.
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram.
• Process valid Class 3 Driving License.
• Comfortable with travelling internationally within Asia (Entitled to travelling allowance).

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65794 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Imagine how your ideas and expertise can change a patient’s life. Our Global Supply Chain team plays a central part in ensuring our products are delivered to patients with cardiovascular disease and critical care needs. You’ll partner cross-functionally with manufacturing operations and sales teams, delivering thoughtful solutions to complex challenges all while developing your knowledge of the medical device industry. Whether your work includes strategic inventory planning, labeling, warehouse management, material handling, or any of our other supply chain opportunities, you will be making a meaningful contribution to our team and to patients all over the world.

How you will make an impact:

• Develop protocols for, and implement, package design, packaging process validation, and package shelf life testing, as well as driving new packaging technologies and strategies to improve time to market and advance the technology of package engineering at Edwards
• Develop plans for moderately complex projects working closely with cross-functional team members and outside suppliers
• Validate packaging equipment and packaging manufacturing processes to determine appropriate sourcing, purchasing, installation planning and specifications
Identify and develop operations packaging projects (e.g., cost improvements, qualify new suppliers and product transfers)
• Design and optimize packaging for moderately complex projects, including new product launches and existing products throughout all stages of product development from concept to launch, including clinical trials, global and limited market releases, as well as key operations initiatives

• Other incidental duties assigned by Leadership

What you'll need (Required):
• Bachelor's Degree in Engineering or Scientific field

What else we look for (Preferred):

• Good computer skills in usage of MS Office Suite; CAD experience preferred
• Good documentation, communication (e.g., written and verbal) and interpersonal relationship skills including consultative and relationship management skills
• Basic understanding of statistical techniques
• Previous experience working with lab/industrial equipment required
• Solid understanding and knowledge of principles, theories, and concepts relevant to Engineering
• Solid problem-solving, organizational, analytical and critical thinking skills
• Solid understanding of processes and equipment used in assigned work
• Knowledge of and adherence to Edwards Environmental Health and Safety and Quality guidelines as they relate to department clean room medical device manufacturing
• Strict attention to detail
• Ability to interact professionally with all organizational levels
• Ability to manage competing priorities in a fast paced environment
• Must be able to work in a team environment, including the ability to manage vendors and project stakeholders
• Ability to build productive internal/external working relationships
• Adhere to all company rules and requirements (e.g., pandemic protocols, Environmental Health & Safety rules) and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control

Job Description

• Industry / Organization Type: Manufacturing
• Position Title: QC Engineer / Quality Control Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Work with Process Engineer & Engineering team on QC requirement
• Document inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

APPLY NOW!!!

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirements in PCB Assembly, quality requirements of plastic molding, die casting, extrusion, metal stamping and machining parts
• Able to converse with overseas suppliers

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65192 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Job Description

• Industry/ Organization Type: Manufacturing/Construction Machinery
• Position Title: Service Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8.15 am – 5.15 pm
• Salary Package: Up to $4,000 + AWS + Meal Allowance + Company Transportation/Transport Allowance + OT
• Duration: Permanent

Key Responsibilities

• Conduct product delivery training for distributors and customers.
• Provide diagnosis guidance and analysis of fault found to Distributor / End-user, remotely via emails and/or calls.
• Carry out field services at sites in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team in locating correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.

APPLY NOW!!!

• Minimum Diploma in Mechanical/Mechatronics Engineering or relevant studies.
• With at least 2 years of relevant working experience in construction machinery industry.
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram.
• Process valid Class 3 Driving License.
• Comfortable with travelling internationally within Asia (Entitled to travelling allowance).

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65794 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description:

- Conduct routine inspection and evaluates their condition and recommend proper execution during work activities.

- Prepare project schedule and presentation of project.

- Lead the kick of meeting.

- Responsible of project management and quality control.

- Prepare & review Civil and Structural drawing.

- Prepare Quantity Take-off of Civil and Structural Materials for BOQ.

- Prepare bid documents for Civil and Structural Project.

- Witness Dimensional Checking during erection & construction.

- Control and check all fabrication activities.

- Maintain welder performances and welders repair.

- Conduct final walk through inspection and monitor rectification of final punch list item. Safety aspects on construction is defined in safety assurance, procedure and thoroughly implemented.

Requirement:

- Minimum 2-4 years Experiences in Civil and Structural sector process plant.

1. Diploma in mechanical engineering, three years or more of equipment hoisting, pressure pipeline installation, painting engineering, thermal insulation engineering, welding related work experience.

2. Skilled use of MS office

3. Need to write MSRA, preferably trained in RA writing

4. Sort out the workflow

Job Description:

• Ensure the smooth operation of MES software and its integration with ERP systems
• Identifying opportunities for process improvement and optimisation
• Monitoring, supporting, and ensuring maintenance and documentation of the MES model in terms of products, routes, operations, equipment, recipes, and lot movements
• Participating in MES-related projects, including project planning, resource allocation, and progress tracking, to ensure successful project delivery within scope, budget, and timeline constraints
• Assist in the planning, implementation and administration of M365 services such as MS Power Automate, PowerBI, SharePoint Online, Teams, Intune, OneDrive and other components
• Support in the conception and implementation up to the introduction of the projects in all phases for a sustainable operation, including Cloud projects
• Further development of our Digital Workplace vision
• Any ad hoc duties assigned by supervisor/manager

Job Requirements:

• Min Bachelor/Diploma in IT with extensive hands-on experience in the area Automation and MES implementation
• Minimum 3 years hands on with MES software platforms implementation and support

Interested candidates do attach your resume to [email protected]

Attn: Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd (99C4599)

Job Description

• Industry/ Organization Type: IT / Software
• Position Title: Data Center Engineer
• Working Location: Boon Lay
• Working Hours: 5 days, Mon – Fri (Morning Shift 6 AM – 2 PM / Afternoon Shift 2 PM – 10 PM)
• Salary Package: Basic Salary up to $5,000 + AWS + Bonus
• Duration: Permanent Role

Key Responsibilities

• Perform periodic walk-through, validation of equipment status, amber lights check, etc.
• Review work order requests in the queue and respond to semi-routine work orders by adhering to commitment times.
• Escalate and expedite orders to appropriate teams upon standard operating procedures.
• Rack and stack semi-routine customer equipment tickets.
• Support datacenter standard operating cross-connect work order requests.
• Support standard operating testing and standard operating installations of customer assets.
• Support standard operating procedures of layer 1 cross-connect certification testing.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma / Degree in IT/Computer Science, or related field.
• Minimum 1 year of IT experience or equivalent.
• Prior working experience in a Data Center, Network or Server environment would be an added advantage.
• Must be comfortable with shift rotation.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66104 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781