Key responsibilities:

• Prepare Board of Directors Meeting deck on quarterly basis
• Participate and provide strategic ideas for Mid-Term Plan on half-yearly basis
• Participate in corporate planning projects (local and regional) and provide analysis support to achieve business results/objectives
• Assist in strategic business planning process and prepare business analysis reports for management’s review
• Provide key analysis of strategic concepts plus financial assumptions along with feasible recommendations
• Partner with line managers to achieve business/process improvement initiatives
• Provide financial modelling solutions, data analytics and analysis to address complex business problems.
• Build strong working relationships with stakeholder to achieve business/process improvement initiatives.
• Corporate planning

Job Requirements:

• Minimum Degree in Engineering or a related discipline from a reputable university
• Fresh graduates or incumbents with maximum 2 years of work experience
• Experience holding leadership roles in institution extra-curricular activities will be considered favorably
• Singaporeans only

Company is expanding and looking at enthusiastic individual to join the team as Management Trainee.

The incumbent will be trained on leadership and operational skills locally, in preparation for hands on application and secondment to subsidiaries overseas. (Thailand, Myanmar)

The Management Trainee will undergo a 2-4 years (2 years SG, 2 years Overseas) program with the Company.

Overview of Job Scope (Non Exhaustive)

• Orders fulfillment

• Record, initiate and enter the orders (orders, acceptance, releasing, and special instructions) into the logistics system to ensure existing information are updated for further processing

• Liaise with external customers including hauliers for necessary arrangements and respond to their enquiries & requirements

• Assist Operations Manager to manage depot performance continually, executing job orders given by respective customers

• Assist Operations Manager to develop associates by providing training and coaching of junior staff so an up to date understanding of processes, policies and procedures are maintained

• Assist Operations Manager in all matters relating to the operations efficiency and safe utilisation of depot facilities and equipment to achieve optimum container throughput

• Assist Operations Manager to ensure compliance with all regulatory requirements including workplace safety, fostering a positive & dynamic team

• Maintain documentation of processes that are followed by the department

• Perform additional tasks as required to meet the department’s needs.

Requirements:

• Minimum Bachelor Degree in any field
• Pro-active, meticulous with an ‘eye’ for details.
• Good team player with positive work attitude.
• Analytical and systematic.
• Possess leadership qualities.
• Excellent communication and interpersonal skills.
• Willing to be bonded for 2-4 years (2 years SG & 2 years Overseas)

Candidates applying will be posted overseas after 1-2 years in Singapore

Job Responsibilities:

• Identify project design hazards, construction risks, and constructability issues.
• Develop corresponding mitigation measures together with the project team.
• Chair regular risk mitigation meetings and training with clients and internal parties.
• Advise management on alternative safer and higher productivity construction methodologies.
• Review method statements and risk assessments for safety and construction compliance.
• Attend meetings related to construction progress, risks, etc.
• Any other duties as assigned by the Managements.

Job Requirements:

• Have reasonable exposure in safety and health for construction especially on transportation infrastructure projects in a similar nature
• Attended the Design for Safety (DfS) for Professional Course and passed the assessment or equivalent.
• A registered PE or Architect with a Practicing Certificate OR
• Minimum 10 years relevant experience in the design and the supervision of the construction of structures with at least 5 years in design which includes contributions to designs and writing specification
• Have a degree accepted by PE Board or Board of Architect and construction related degree accepted by Singapore Institute of Surveyors (SISV) and Society of Project Managers (SPM)
• Possess excellent leadership, planning, good management skills, interpersonal communication and negotiation skills
• Have experience in LTA projects have an advantage

Your Job

As a Product Design Engineer specializing in IO connectors, your primary focus will be on supporting the development and manufacturing of new products. This will involve collaborating with manufacturing teams to review and provide feedback on the feasibility and plant capability of new concepts. You will also conduct analysis activities such as Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to ensure product performance and integrity.

Our Team

You will be reporting to Manager, Product Design

What You Will Do

• Support of new Product Development and manufacturing for IO connectors.
• Review new concepts with manufacturing and provide feedback on feasibility and plant capability
• Support analysis activities such as POC, FEA and Tolerance Analysis
• Provide alternative solutions to resolve gaps in achieving target specifications
• Manage activities related to FOT, FSV and DVP&R testing
• Support existing product already in production or launching.
• Provide Engineering support of customer quality issues to ensure product reliability
• Provide Engineering support to plant for cost reductions and yield improvements
• Create Product Modifications and series expansions to increase market share
• Other duties as assigned by Management

Who You Are (Basic Qualifications)

• Bachelor’s degree in engineering
• 3 years mechanical product design experience with electronic products
• Experienced with product development process
• Understanding of Tolerance analysis, DFMEA, FEA
• Attention to details, be creative, good interpersonal skills to work effectively with internal cross functional teams and external customers
• Self-starter with confidence to initiate action independently

What Will Put You Ahead

• Bachelor’s degree in mechanical engineering and similar work experience
• From connector industries
• 5 years with specific high speed data connector design knowledge in the commercial or consumer space
• Knowledge of SMT design and signal integrity
• Strong mechanical aptitude and experience with clean sheet new product development component design
• Advanced tolerance stack understanding and risk mitigation skills
• Familiar with the component manufacturing environment, understanding of industry quality standards and requirements
• Basic knowledge on component design (injection, diecasting, sheet metal stamping)

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

As a Product Design Engineer specializing in IO connectors, your primary focus will be on supporting the development and manufacturing of new products. This will involve collaborating with manufacturing teams to review and provide feedback on the feasibility and plant capability of new concepts. You will also conduct analysis activities such as Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to ensure product performance and integrity.

Our Team

You will be reporting to Manager, Product Design

What You Will Do

• Support of new Product Development and manufacturing for IO connectors.
• Review new concepts with manufacturing and provide feedback on feasibility and plant capability
• Support analysis activities such as POC, FEA and Tolerance Analysis
• Provide alternative solutions to resolve gaps in achieving target specifications
• Manage activities related to FOT, FSV and DVP&R testing
• Support existing product already in production or launching.
• Provide Engineering support of customer quality issues to ensure product reliability
• Provide Engineering support to plant for cost reductions and yield improvements
• Create Product Modifications and series expansions to increase market share
• Other duties as assigned by Management

Who You Are (Basic Qualifications)

• Bachelor’s degree in engineering
• 3 years mechanical product design experience with electronic products
• Experienced with product development process
• Understanding of Tolerance analysis, DFMEA, FEA
• Attention to details, be creative, good interpersonal skills to work effectively with internal cross functional teams and external customers
• Self-starter with confidence to initiate action independently

What Will Put You Ahead

• Bachelor’s degree in mechanical engineering and similar work experience
• From connector industries
• 5 years with specific high speed data connector design knowledge in the commercial or consumer space
• Knowledge of SMT design and signal integrity
• Strong mechanical aptitude and experience with clean sheet new product development component design
• Advanced tolerance stack understanding and risk mitigation skills
• Familiar with the component manufacturing environment, understanding of industry quality standards and requirements
• Basic knowledge on component design (injection, diecasting, sheet metal stamping)

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Overview

SIMO Corporation enables people, devices, and machines with a fast, and cost-effective global mobile Internet connection. We provide a connected, on-demand local experience to businesses and consumers on-the-move.

Our Senior Product Manager will report to the Chief Product Officer. Keys to succeed in the role:

• Thriving in the startup culture: Flexible, Fast, Fun
• Bringing a sharp, creative, organized, and disciplined approach to build product
• Exhibiting a strong acumen software product, UX and UI design
• Desiring to take full ownership of your work and the results
• Being completely dedicated to success

Your Mission

Be responsible to drive the end-to-end delivery of our PaaS platform capabilities for our internal mobile resource management and for our Carrier and MVNO. Our PaaS platform is a key component of our product offering ensuring our customers and internal team have a fully automated system to manage the end-to-end lifecycle of SIM cards and eSIM resources that are dispatched into devices. Our PaaS platform integrates component such as SIM provisioning, utilization analytics, and A.I. driven dispatch policies to ensure the our customer with the best quality of experience at a lowest cost.

The Product Manager shall:

• lead engagement with key customers, mobile carriers and MVNO partners to scope their needs and design solution
• work closely with our operation team to understand our own needs and translate it into effective product.
• Simplify and maintain a consistent experience across product, interface and product marketing documentation.

Key success metrics will be a combination of NPS score, successful launch of product that meet customer requirements and adoption.

Main Responsibilities

The main aspects of your mission would consist in:

• Owning the PaaS product definition, its value proposition, UX/UI, its roadmap priorities and ensure execution by our engineering team;
• Defining all the processes related to our product lifecycle;
• Writing the required product specifications, and product documentation;
• Develop data model to optimize SIM supply and cost management and translate it into valuable product for customer
• Designing all the external materials for customer and business partner including documentations and product marketing presentations;
• Ensuring proper training of various team using the product
• Collaborating with engineering and business development to solve critical business challenges;
• Ensuring timely execution of roadmap and overall product and services quality.

Desired Competence and Experience

• Bachelor ’s degree in Computer Sciences or similar
• At least 10 years in software product development and SaaS
• Experience with eTOM and TM Forum Frameworks
• Experience dealing with data driven product, building A.I. model, and machine learning
• Experience in product development of SaaS inventory management system for mobile environment
• Proven experience in product management for MVNO / MNO business support system (BSS).
• Not afraid to be hands-on with a critical reasoning, creative eye, good imagination and curious mindset
• Passion for answering difficult business questions related to user journey, software interface and organization of workflow. Sharp eyes to look for details, inconsistencies, or defects.
• Highly self-motivated and able to work independently as well as in a remote team environment
• Strong project management and desire to own many projects at one time
• Outstanding communication skills (both in presentation and comprehension)
• A high-level of interest in the mobile Internet, 4G/5G, and IoT/consumer electronics industries
• English, and Chinese mandarin bilingual
• Remote working, flexible location.

About SIMO Corporation

SIMO Corporation delivers a seamless Software-as-a-Service data connectivity experience. We target wireless devices such as tablets, laptops, or IoT devices that are currently unconnected or poorly connected on cellular networks. Our patented software-as-a-service technology provides customers on-demand, always-available local connectivity. Our SaaS works out-of-the-box and does not require complex and lengthy integration for device manufacturers or carriers, before generating new revenue stream. We already partnered with numerous carriers, chip makers and device manufacturers to provide limitless connections to millions of customers, and welcome new partners to work together to enable a more connected world.

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Your Job

Part of the New Product Development team, you will collaborate with cross-functional teams, including design, manufacturing, and supply chain, to mitigate risks, drive improvements, and ensure compliance with internal and external quality standards to ensure the flawless introduction of products into the market.

Our Team

Molex creates connections for life by enabling technologies that transform the future and improve lives. You will be in our Datacom and Specialty Solutions (DSS) division, which designs and manufactures an extensive product line serving customers in telecommunications, datacom, (hyperscale) data center, cloud, and storage applications.

What You Will Do

• Collaborate with cross-functional teams to facilitate risk assessment and mitigation activities during design, prototype and manufacturing phases of new product development.
• Develop and implement comprehensive quality plans that is focused on the voice of customers and adhere to required internal and external standards to achieve new product qualification.
• Support supplier quality assessments and collaborate with suppliers to achieve qualification on new products.
• Lead or facilitate problem solving and resolution of quality issues during launch, and support efforts to prevent future occurrences.
• Champion continuous improvement and lean initiatives to improve new product development and advanced product quality planning.

Who You Are (Basic Qualifications)

• Experience in new product introduction - product and process development and qualification
• Experience in quality management and advance product quality planning
• Strong interpersonal skills
• Strong analytical and critical thinking abilities

What Will Put You Ahead

• Degree in Engineering or related field
• Working knowledge of electronic assembly, testing, molding, stamping, plating and assembly processes
• Strong leadership abilities

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

Part of the New Product Development team, you will collaborate with cross-functional teams, including design, manufacturing, and supply chain, to mitigate risks, drive improvements, and ensure compliance with internal and external quality standards to ensure the flawless introduction of products into the market.

Our Team

Molex creates connections for life by enabling technologies that transform the future and improve lives. You will be in our Datacom and Specialty Solutions (DSS) division, which designs and manufactures an extensive product line serving customers in telecommunications, datacom, (hyperscale) data center, cloud, and storage applications.

What You Will Do

• Collaborate with cross-functional teams to facilitate risk assessment and mitigation activities during design, prototype and manufacturing phases of new product development.
• Develop and implement comprehensive quality plans that is focused on the voice of customers and adhere to required internal and external standards to achieve new product qualification.
• Support supplier quality assessments and collaborate with suppliers to achieve qualification on new products.
• Lead or facilitate problem solving and resolution of quality issues during launch, and support efforts to prevent future occurrences.
• Champion continuous improvement and lean initiatives to improve new product development and advanced product quality planning.

Who You Are (Basic Qualifications)

• Experience in new product introduction - product and process development and qualification
• Experience in quality management and advance product quality planning
• Strong interpersonal skills
• Strong analytical and critical thinking abilities

What Will Put You Ahead

• Degree in Engineering or related field
• Working knowledge of electronic assembly, testing, molding, stamping, plating and assembly processes
• Strong leadership abilities

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

THIS IS A 2-YEARS RENEWABLE / CONVERTIBLE CONTRACT ROLE

The Centre Management System Support, Executive/Senior Executive is responsible for overseeing the upkeep, procurement & maintenance of all exhibits, audio-visual equipment, facilities and essential services for daily operations for centres/museums under Defence Collective Singapore (DCS).

RESPONSIBILITIES

• Maintenance Planning: Planning and implementation of building maintenance programs for architectural, electrical, and mechanical, exhibits and attractions AV lighting systems. Co-ordinate and liaise with internal and external vendors for the execution of maintenance services. Conduct joint inspection rounds with Specialists/Technical Officers on building/Exhibit/AV & lighting defects.
• Safety Compliance: Ensure compliance with safety equipment, work methods, and procedures. Promptly rectify any unsafe situations, adhering to Workplace Safety and Health (WSH) regulations. Be responsible for implementing Company’s SOP and policies including compliance to QEHS policies. Conducting regular checks on the entire building to ensure the prompt removal of fire hazards, proper functioning of fire escapes, fire doors, and obstruction-free access.
• Supervise Works: Control and supervise all AV Lighting and exhibition related works performed by Specialists/Technical Officers and contractors, including those carried out by tenant's fitting out contractors. Supervise and inspect the works of contractors and the works of the service providers (cleaning, housekeeping, landscaping, pest control, car park and security). To ensure contractors’ compliance to safety, regulations and level of standards set by DCS.
• Repairs and Emergency Situations: Responding to emergency situations & troubleshoot sound and video and ensuring prompt repairs of property facilities. Providing updates to Centre Management team with regards to the situation.
• Procurement: Manage budgetary control of expenditures including preparation of annual budgets and forecast. Conduct tender exercises for OPEX/CAPEX works such as replacement, upgrading or redevelopment works and manage such works according to timeline including putting up of documents and procurement for OPEX/CAPEX requests.
• Daily Operations: Responsible for the coordination of meetings and events such as logistics support, obtaining quotations, raising of invoices etc. Conduct regular inspection of the centre to ensure high standard of cleanliness and service are provided by term contractors related to cleaning, landscape, pest control etc.
• Reports: Monitor and report on the work progress of minor improvement projects or A&A work. Tabulate inspection report and plans for defects rectification.
• Project Management: Procurement of services as well as management of services and projects from inception, execution and to completion. Project lead to manage all aspects of project.
• Event Management: To provide audio, visual and media services for events and activities (e.g. Family Day, celebrations, etc). To help staff (hands-on) on setup of technology in the venues.
• Others: provide training to staff and students on the use of AV and lighting equipment, carry out any ad-hoc duties, handyman work, projects as assigned.

REQUIREMENTS

• Minimum diploma in the audiovisual technology, sound engineering, lighting design technology or any related field, such as digital media or related disciplines.
• Demonstrated ability to communicate effectively, including proficiency in clear, concise, and compelling oral and written communication in English.
• Demonstrated ability to work independently and under pressure and to manage multiple concurrent tasks and responsibilities while dealing with changing priorities.
• Possess strong working knowledge with maintenance work, local codes and regulations. Familiar with statutory requirements on building services, facility operations, maintenance, and safety.
• Withstand various strenuous activities such as frequent walking, prolonged standing, climbing ladders, bending, and kneeling without restriction.
• Able to work on rotating shifts, weekends, and public holidays.
• Relevant experiences in facilities management/MCST, ACMV, M&E Systems, building automation system (BAS), Certification as Fire Safety Manager will be an added advantage.

• Collaborate with key business stakeholders to gather and translate requirements into product requirements

• Review business processes and identify optimizing solutions/features
• Maintain and deliver strategic and tactical features with an Agile approach
• Manage and prioritize product backlog and roadmap based on business needs requirements
• Develop user stories, document acceptance criteria and perform user acceptance testing
• Monitor deliverables and ensure timely and successful delivery of projects/initiatives
• Ensure compliance with all applicable laws and regulations relating to the above functional activities

• 3-5 years working experience as a Product Owner or Business Analyst in a Financial Services/Insurance Industry (preferred)
• Have experience rolling out enhancements/projects on B2B digital platforms (web portal)
• Have experience working with stakeholders in Group Business (advisors, brokers) is a plus
• Agile knowledge and working with Project Management tools (e.g. Confluence/JIRA)

Job Responsibilities:

• Install, maintain, and repair electrical systems and components.
• Conduct regular inspections of electrical systems to ensure compliance with safety regulations.
• Troubleshoot electrical issues, including diagnosing faults and repairing equipment in a timely manner.
• Assist with the design and layout of electrical systems for new projects or modifications.
• Interpret electrical blueprints, wiring diagrams, and technical specifications.
• Adhere to all safety and quality control standards.

Qualifications:

• Associate's degree or higher in Electrical Engineering, Electrical Technology, or a related field.
• Proficient in troubleshooting and repairing electrical systems and machinery.
• Strong knowledge of electrical codes and safety regulations.
• Familiarity with electrical testing equipment and tools.
• Ability to read and interpret technical drawings and schematics.

Position Overview: The Coordinator of Client Management Support plays a pivotal role in ensuring the smooth and efficient operations of the client management team. This individual will provide essential administrative and organizational support to facilitate effective client communication, relationship management, and overall client satisfaction. The Coordinator will collaborate closely with the client management team, as well as various internal departments, to maintain high-quality service delivery and uphold the company's reputation for excellence.

Key Responsibilities:

1. Client Communication: Act as a primary point of contact for clients' inquiries, requests, and concerns, ensuring prompt and professional responses. Collaborate with client management team members to gather necessary information and provide comprehensive responses.
2. Administrative Support: Assist in preparing and distributing client-related documents, contracts, and reports. Maintain accurate and up-to-date client records, ensuring data integrity and confidentiality.
3. Scheduling and Coordination: Coordinate client meetings, appointments, and follow-ups. Ensure that client management team members are well-prepared for meetings with relevant information and materials.
4. Issue Resolution: Collaborate with the client management team to address and resolve client concerns or issues. Escalate complex problems to appropriate team members while maintaining clear communication with clients.
5. Cross-Functional Collaboration: Collaborate with internal teams such as operations, and finance to ensure cohesive communication and alignment of strategies related to client management.
6. Billing: Monthly billing of all client warehousing activities.

Qualifications:

• Diploma in business administration, or a related field (or equivalent work experience).
• Strong organizational and multitasking skills, with a keen eye for detail.
• Excellent written and verbal communication skills.
• Proficiency in using office software (e.g., Microsoft Office Suite, Google Workspace).
• Ability to work collaboratively in a team-oriented environment.
• Prior experience in client support, customer service, or administrative roles is preferred.
• Familiarity with SAP software and database management is a plus.

Attributes:

• Customer-focused attitude with a commitment to delivering exceptional client service.
• Proactive problem-solving skills and the ability to stay composed under pressure.
• Strong interpersonal skills for building rapport with clients and colleagues.
• Adaptability to evolving client needs and shifting priorities.
• High level of professionalism, integrity, and confidentiality.

The Coordinator of Client Management Support is an integral part of the client management team, contributing to the success of client relationships and the overall growth of the organization. This role offers an opportunity to develop valuable skills in client interaction, project management, and cross-functional collaboration.

Responsibilities:

• Assist Senior Contracts Manager in tender/contract review and finalizing the tender sum.
• Help with contract administration, progress claims, and liaise with the Client's representative on claims and variation costs.
• Compile subcontractor quotes for review and approval.
• Keep Contract Manager updated on all contractual and site matters.
• Review and verify subcontractor/supplier claims and prepare payment certificates for approval.
• Prepare final accounts and variation submissions.
• Maintain quality systems in the Contracts Department.

Requirements:

• Minimum Diploma in Quantity Surveying or equivalents.
• At least 5 years of working experience related field.
• Preferably experienced in pipe jacking works and tunnelling projects.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Support the Project Director (PD) in project functions, including project management, site management, and risk control to achieve project goals.
• Lead and mentor the project team by setting guidelines, providing advice, and supervising as needed.
• Oversee all project management activities from planning and coordination to completion within budget, schedule, and quality standards.
• Assist PD in compiling project progress reports (e.g., Monthly Report, VO Management, EOT Assessment, Project Progress Updates).
• Monitor the project schedule and manage daily operations, setting short- and long-term goals, coordinating with other contractors.
• Conduct technical reviews to ensure contract compliance and adherence to completion timelines.
• Liaise with clients, consultants, and contractors, attending regular meetings to ensure project progress.
• Supervise site labor and subcontractors, resolving construction issues as they arise.
• Oversee quality control, safety, and EHS practices on-site, identifying high-risk activities before construction and approving Method Statements.

Requirements:

• Degree in Civil Engineering or equivalent, recognized by the Singapore Professional Engineers Board (PEB).
• At least 10 years of experience in the construction industry.
• Experience in LTA, roadworks, MRT, and viaduct projects.

_____________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Execute service and maintenance workflows efficiently.
• Coordinate with client representatives on all service/maintenance matters.
• Assist the supervisor in organizing teams for service tasks and delegating responsibilities.
• Manage daily client interactions, ensuring their expectations are met.
• Support the supervisor in troubleshooting and timely completion of security system services.
• Understand each client's business to ensure high customer satisfaction.
• Ensure all work complies with Workplace Safety and Health Act regulations.

Requirements:

• Minimum Nitec in Electrical/Electronic Engineering.
• At least 2 years of working experience in related field.
• Requires knowledge and practical experience with security systems (e.g., Integrated Security Management, Card Access Control, Intrusion Detection, and CCTV systems).
• IT/Network/Server knowledge is a plus.
• Transport allowance provided.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

An Offshore company provide general offshore support services, drilling rig, support functions and cargo transport operations to the Oil and Gas Industrial.

Responsibilities:

• Day-to-Day technical management of assigned vessels and engine crew, in compliance with Company and Authorities' rules and regulations, for best performance
• Preparation and supervision of vessels repair, maintenance and dry-docking
• Planning and control of vessels’ operating budget and spares inventory
• Effective cost management for maintenance expenses
• Ensuring that up time is keep at the most optimal level for all vessels
• Review and analyse technical reports for managing breakdown and preventive maintenance
• Liaise with charterer, class and clients on technical related matters.
• Attend and take delivery of the new build vessels. Review and verify engineering design/drawing, technical specification and documentation are met. Commissioning vessel’s equipment and attend the sea trials.
• Review vessel’s LO & FO consumption.
• Organize and attend to vessels annual, DP and FMEA trials.
• Any other tasks assigned by Technical Manager or Management.

• Requirements:
• Posses Polytechnic/Degree in Mechanical Engineering.
• Possess relevant sea-going work experience as Chief Engineer/Marine Engineer with minimum class 2 certification or equivalent with in experience in AHTS, Offshore Supply/Offshore tug vessels. Those with DP vessel experience will be highly advantageous.
• At least 2 years shore based experience
• Possess good organisational and communication skills and hands-on.
• Independent and resourceful. Able to work under pressure to meet deadline.
• Analytical and highly proactive in technical trouble shooting and problem solving.
• Able to conduct effective stand-up training for vessel crews.
• Ability to travel within short notice as required.

Responsibilities:

• Primarily deal with non-or minimally-invasive procedures.

Requirements:

• Must possessed MBBS certification.
• Have at least 5 years of experience as aesthetic doctor.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Prepare and cook a diverse range of dishes, such as breakfast options, sandwiches, salads, soups, pastries, and other cafe favorites.
• Ensure the quality and flavor of food consistently meet or exceed customer expectations.
• Develop creative and enticing menus tailored to a variety of customer tastes and dietary needs.
• Maintain detailed food inventory records, monitor stock levels, and plan ingredient requirements in advance.
• Follow proper culinary techniques, food safety protocols, and health regulations.

Requirements:

• Demonstrated experience as a Chef in a cafe or comparable food service setting.
• Extensive understanding of cooking methods, menu development, and food preparation.
• Skilled in designing and implementing innovative and attractive menus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsible for the overall performance of the designated department / accounts, delivering consistent financial growth through sustainable business strategies and operational excellence in tandem with the growth strategy of the Company. As a top management representative of the Company, continuously build strategic client relationships (new and existing), drive a high performing and stable team and promote cross collaboration with other departments.