· Must be a Multi-task person and physically fit.

· Good team player.

· Training will be provided.

· Candidate with experience in food production environment is an added advantage.

· Working hours: Mon to Thurs (Day Shift: 7am to 7pm) or (Night Shift: 7pm to 7am) subject to the supervisor’s arrangement.

· 健康良好，能身兼多职。

· 良好的团队合作精神。

· 无经验者提供培训。

· 有食品生产环境工作经验者优先。

· 工作时间：周一至周四 (早班：上午7点到晚上7点)或( 晚班：晚上7点到隔天早上7点），具体安排由主管决定。

Duties & Responsibilities

• Prepare the equipment list
• Prepare the specification and data sheet as per codes / standards, project and client’s requirement, for pump, loading arm, lifting cranes, marine gangway, air compressor, nitrogen package, hot oil package, oily water system, vapor recovery system and etc equipment for Oil & Gas industries
• Prepare the specification and data sheet for cryogenic pump, BOG compressor, condenser, LPG heater, seawater strainer, flare and etc equipment for LPG industries
• Prepare the requisition and RFQ documents for vendor enquiry
• Prepare the technical clarification and technical bid evaluation of vendor proposal
• Review and check the drawings, designs specification, materials and equipment from vendor for conformity with project technical requirements
• To liaise effectively with vendor and inter-departments to resolve engineering technical issue
• To resolve and response to client comment.
• Prepare information drawing for interface design work whenever is necessary
• Prepare bill of material for cost estimation of bid project
• Provide engineering support for the equipment installation and commissioning activities at site
• Provide engineering support for maintenance works.
• To carry out any other duties as and when assigned by the immediate supervisor or principle engineer

Qualification & Experience Generally Required

• Bachelor Degree in Mechanical Engineering or its equivalent
• Min. 1 to 2 years engineering knowledge in mechanical disciplines in Oil & Gas and Petrochemical industries.
• Experienced in equipment engineering specifications and standards
• Familiar with industrial standards and local codes
• Strong communication skills and the ability to stay organised and multi-task
• Proficient in using MS Word, Excel, Autocad

The PTO Lead Process Engineer leads new product introductions and the transfer of drug products to other facilities of moderate/high complexity independently and is a coach for his/her colleagues on the commercialization and manufacture of all drug products. He/ she typically will assume the responsibilities of a technical product steward and leads/supports all technical/ process activities (for example) investigations, validation and qualification processes, risk assessments and process safety management activities under his/ her responsibilities. The PTO Lead Process Engineer also leads/supports continuous process improvement activities to enhance site performance metrics and provides advanced/expert knowledge to the site and across our global technical network (while leveraging on other site experiences / knowledge) and continuously expands on personal expertise. He/ she will also provide technical supply support independently. The PTO Lead Process Engineer is expected to possess advanced/expert knowledge of at least one process/platform technology and supports the objectives of his/her seniors and the direct supervisor.

WHAT YOU WILL DO

MAIN RESPONSBILITIES

• Leads new product introductions to the site by conducting process and equipment comparisons, new raw materials introduction, development studies, clinical supplies manufacturing, cleaning processes development/ validation and training of technicians as required. Identifies and implements strategies for PPQ matrixing, novel technologies and new products etc. Authors PPQ protocols, reports and other associated documentation related to a new product introduction. Expected to have an advanced knowledge of product development, scale-up and technical transfer, key supporting documentation and associated regulatory requirements. Anticipates and remediates quality issues and challenges from the technology transfer process. Demonstrates advanced knowledge in technical writing for investigations, change request, PPQ reports and CMC sections.
• Leads and/or supports the design and execution of small/ full scale experiments using appropriate methodology and/or simulations for products/ processes to evaluate the impact of proposed changes to validated equipment/ processes.
• Proactively identify solutions independently to address issues that arose during experiment/ evaluation
• Leads/ provides technical guidance in support of site and divisional capital projects and new facility start-up activities. Ensures that the process design is well thought-out and robust for routine manufacturing. Provide technical input independently to the process design to ensure its fit for purpose for routine manufacturing. Responsible to transfer the knowledge of the project and facility to IPT colleagues.
• Provides technical expertise related to the product, equipment and manufacturing/cleaning processes in response to deviations/ product complaints/ adverse events to identify point of occurrence, root cause and corrective/ preventative actions. Demonstrates ability to lead and resolve complex technical issues and investigations and resolve with minimal supervision.
• Provides technical expertise for compliance activities such as audit and regulatory support. Acts as primary regulatory representative with business partners and regulatory agencies for moderately complex products/ programs/ issues.
• Manages product portfolio activities and is expected to manage a project team for activities associated with the product portfolio. Examples (but not limited to) include managing documentation updates (e.g. SOPs, batchsheets, recipes), quality risk assessments, change control management/ filing support (if applicable) and validation activities such as equipment qualification, simple process validation and cleaning validation/monitoring activities. Expected to have an advanced knowledge of respective compliance topics related to the above-mentioned activities. Demonstrates good project management skills (e.g. define core team and activities, project scheduling, stakeholder management and issues escalation etc), and demonstrates the ability to manage/ influence the project team.
• Supports routine supply manufacture by providing on going technical support to the IPT, participates in Tier processes and implements opportunities for improvement utilizing MPS (Our Production Systems) tools. Ensures optimum production runs, identifies constraints and non-conformances and troubleshoots to resolve complex issues in production systems. In addition, conceptualizes process designs to troubleshoot and resolve complex operational or manufacturing issues and recommend enhancements to improve production runs and enable the continuously improvement of the product cost structure.
• Manages and performs the proactive monitoring of the performance of process parameters, critical quality attributes and equipment/module(s)/unit operation(s) performance during manufacturing and cleaning. This could involve leading/participating in Prospective Process Analysis (PPA), statistical analysis and response to shifts and trends in process performance. Undertakes responsibilities as an active site product steward and is a member of the Value Chain Technical Team where applicable.
• In addition, leads Continued Process Verification and participates in Annual Product review activities as part of product lifecycle management. Applies moderately complex statistical and risk analysis tools to evaluate actions required to ensure product robustness across applicable manufacturing equipment and processes.
• Demonstrates advanced understanding of product CPP, CQA, Cpk and sterile boundary of the current validated processes. Has good knowledge of the raw materials and PCC (product contact components) used for the products under his/her responsibility.
• Actively participates and shows commitment to collaboration and sharing of best practices across the global S&T network. Typically possesses advanced and/or expert knowledge in at least one platform technology/ process.
• Complies with all divisional and site-specific policies, guidelines and procedures.
• Demonstrates and promotes Environmental, Health & Safety (EHS) leadership behaviors, ensuring that all activities are carried out in accordance with EHS requirements. Actively participates in GEMBA safety walks. Leads/ participates process hazards analyses (PHA) and applicable Process Safety Management (PSM) activities related to new/inline products.
• Where applicable, develops SOPs, gap analyses and procedures for Quality/EHS subsystems/ topics in compliance with regulatory requirements, divisional and corporate policies and guidelines. Typically possesses advanced and/or expert knowledge in at least one compliance topic.
• Demonstrates leadership behaviors in alignment with our leadership standards (Individual Contributor). Practices Inclusion as the How.
• Leads personal career development with manager assistance through annual Performance Management Process (PMP), Employee Development Plan (EDP) and career mapping.
• Any other duties as assigned by the Supervisor.

WHAT YOU MUST HAVE

Qualification:

• Bachelor's degree in a technical field, including Chemical or Mechanical Engineering, Chemistry or Pharmaceutical Sciences

Experience:

• Minimum 5 to 10 years technical experience in related pharmaceutical manufacturing industry.
• Demonstrated capability to successfully lead teams in complex projects.
• Expert knowledge of core technology/unit operations relevant to active pharmaceutical ingredient, Biotech and/or Non-Sterile manufacturing.

Leadership, Professional and Functional Competencies

• Demonstrate leadership skills in alignment with our Leadership Standards, focusing on build talent, fostering collaboration and drive results.
• Effective communication skills, both oral and written. Ability to work effectively on cross- functional teams as a leader or a core member.
• Strong Leadership capabilities, with desire for active people development in the organization.

Who we are

We are known as Merck & Co., Inc., Rahway, New Jersey, USA in the United States and Canada and MSD everywhere else. For more than a century, we have been inventing for life, bringing forward medicines and vaccines for many of the world's most challenging diseases. Today, our company continues to be at the forefront of research to deliver innovative health solutions and advance the prevention and treatment of diseases that threaten people and animals around the world.

What we look for

Imagine getting up in the morning for a job as important as helping to save and improve lives around the world. Here, you have that opportunity. You can put your empathy, creativity, digital mastery, or scientific genius to work in collaboration with a diverse group of colleagues who pursue and bring hope to countless people who are battling some of the most challenging diseases of our time. Our team is constantly evolving, so if you are among the intellectually curious, join us—and start making your impact today.

As a member of the Control & Instrumentation team, you will be responsible for the effective maintenance of control systems and instrumentation in the power plant to achieve high reliability and availability in accordance with statutory, regulatory, and safety requirements.

Responsibilities:

• Ensure maintenance work is executed effectively, efficiently and complied with safety and regulatory requirement.
• Respond and attend to plant failures and forced outages to ensure timely and proper rectification and restoration.
• Plan and ensure safe and timely execution of plant overhaul activities.
• Recommend and implement modification, upgrading and installation plans for plant system and equipment for enhancement, availability and reliability improvement.
• Manage the procurement of parts and services to meet the maintenance needs of the section, including spare parts and external services for routine and breakdown maintenance.
• Lead and manage a team of technical officers and technicians.
• Development of staff.

Requirements:

• Degree in Electronic & Electrical Engineering or equivalent recognised by the Professional Engineers Board.
• Possesses sound knowledge of Control and Instrumentation and good working knowledge of safety and statutory requirements.
• Driven self-starter with strong work ethics.
• Team player with strong analytical, technology and communication skills.
• Is available on standby after office hours for emergency calls.
• Knowledge in cyber security will be advantageous.
• Have a safety mindset and display good workplace safety behaviour.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures.
• Witness and provide contractor resources to support FAT as required.
  Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

Job Info:

• Basic: $3000 - $4000 + Phone Allowance + OT + Performance Bonus
• Working Hour: Monday - Friday (9am - 6pm)
• Location: Tampines

Job Scope:

• Take the lead on AV initiatives and provide input for project procurement
• Offer expert advice on project plans and layouts
• Assist in the procurement of AV hardware and software, ensuring project needs are met
• Plan, maintain, and monitor project timelines, intervening when necessary, and managing equipment storage and transportation
• Perform rack and stack, onsite installation, upgrades, troubleshooting, and repair of AV equipment, networking, and other in-house projects at customer premises
• Complete electrical wiring, trunking, programming, and basic construction setups (may require the use of a ladder)
• Manage, test, and commission CCTV, door access, ELV equipment, Bluetooth devices, and other necessary devices
• Ensure timely completion of testing, configuration, staging, and upgrades for assigned projects
• Liaise with clients to understand their requirements
• Conduct quality control analysis prior to events
• Diagnose and resolve technical issues, both hardware and software, as needed
• Respond to service calls related to equipment breakdowns
• Provide on-site support and user training at end-users' premises.
• Ensure production and updating of documentation such as user guides, etc
• Follow up with the finance department regarding costing and billing

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Qualification:

-Degree in Electrical.

- 3-5 yrs experience at Electrical Equipment.

Job Description:

Improved JD:

• Oversee the maintenance, monitoring, and uptime of EV charging stations to ensure seamless customer experiences. Lead a service team.

• Manage the lifecycle of technology assets, including chargers, software platforms, and network security, ensuring system reliability and scalability.

• Establish and implement SOPs for troubleshooting and preventive maintenance, optimizing network performance.

• Implement data analytics solutions to monitor and analyze charging station performance, driving continuous improvements in operational efficiency.

- Collaborate with key vendors, suppliers, and partners to secure and manage essential hardware, software, and support services. Oversee the design, testing, and implementation of new chargers, including setting up Router, LAN or SIM. Set up API.

- ⁠Ensure that all technology solutions comply with local regulations and industry standards for safety, environmental impact, and cybersecurity.

• Oversee the implementation of cybersecurity protocols to protect customer data and infrastructure from potential threats.

- Work closely with the customer support team to address technical issues and improve customer satisfaction.

• Evaluate and manage relationships with Factory & technology providers, ensuring cost efficiency and quality.

Purpose Statement:

• Ensures reliability and mechanical integrity of equipment for processes, utilities, facilities and controls with an objective to constantly improve site production and cost performance.
• Develops engineering solutions for repetitive failures and all other problems that adversely affect plant operations including capacity, quality, cost or regulatory compliance issues.
• Promotes, supports, co-ordinates and facilitates multi-disciplinary, multi-level teamwork (reliability) improvement activities, both reactive and proactive, and assist in implementation and follow-up of action items

Major Responsibilities:

• Ensures reliability and maintainability of equipment, processes, utilities, facilities and controls with an objective to constantly improve site production and cost performance
• Lead and drive mechanical integrity program in compliance with regulations
• Take a lead to troubleshoot equipment reliability issues and carryout RCFA for the repeated failures and failures that has an impact to production, quality and safety.
• Lead RCM studies for critical assets/systems and implement the action items generated.
• Run online/offline condition monitoring program site wide.
• Promotes, supports, co-ordinates and facilitates multi-disciplinary, multi-level teamwork (reliability) improvement activities, both reactive and proactive, and assist in implementation and follow-up of action items.
• Works with project engineering teams to ensure reliability/ maintainability of new/modified installations.
• Perform analysis of asset performance including: Asset utilization, Overall equipment effectiveness, remaining useful life and capital replacement plans as well as other parameters that define Site MEP KPIs such as availability, maintenance performance, reliability and R&M costs of assets.
• Develop SOPs, equipment job aids, checklist to assure no equipment reliability issue after repair work.
• Evaluate content of maintenance plans in CMMS including methods, maintenance frequencies and spare parts needed

Qualifications:

Education

• A bachelor’s degree or a diploma in Mechanical engineering discipline.

Experience

• Mechanical engineering degree with at least 5 years work experience or a diploma with a minimum of 15 years of relevant work experience in pharmaceutical/ biological/ chemical/ oil & gas industries.
• Experience driving RCM studies and RCFA
• Experience/Knowledge in Asset Integrity Management
• Sound technical knowledge coupled with hands-on experience in maintenance of processing equipment

Skills

• Comfortable working in a team and matrix environments with high degree of initiative and self-motivation
• Scientific approach to solving problems and makes data-based decisions.
• Keen in driving and adopting new technologies.
• Knowledge of CMMS, Reliability, and proficiency in MS Office products (Excel, Outlook, PowerPoint, Word, Project)
• Knowledge on vibration analysis, RCM and RBI
• API 510/570/580 certification will be an added advantage
• Good written and oral communication skills
• Interpersonal skills and a "hands-on" attitude
• cGMP experience is a plus

Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.

Position Overview: Customer Success Engineer provides technical support and ensures the success of our client's post-implementation. He/she is to be highly knowledgeable and skilled in all aspects of Tunity’s product architecture, showcasing individual expertise in software and adept knowledge of its integration with hardware. Acting as the technical contact point for our clients, he/she ensures a seamless and cohesive experience of service support for our clients.

Key Responsibilities:

• Product Expertise: Develop a deep understanding of Tunity's products, from software to hardware, to provide comprehensive support across our product and solution suite.

• Software Support: Provide expert software support, resolving issues swiftly at the root cause to maintain high levels of client satisfaction.

• Maintenance Management: Implement and manage software maintenance processes, actively monitoring and analysing activities to identify improvement areas, and managing preventative maintenance schedules.

• Solution Maintenance: Oversee the ongoing maintenance of software and platform solutions, ensuring they are current, optimized, and operating effectively within the client's infrastructure.

• Hardware Liaison: Collaborate closely with the hardware team, addressing hardware-related concerns, and providing timely resolutions to clients.

• Client Communication: Work in tandem with Customer Success Specialists in client engagements and communications, such as guiding clients on resolution processes, conducting training, participating in and contributing to client meetings, etc.

• Documentation and Analysis: Create and maintain technical documentation, conduct regular system performance and cost analysis, and prepare reports that inform strategic decisions.

• Technical Assessments and Implementation: Lead in-depth technical reviews and strategically recommend solutions to address client change requests, ensuring optimal outcomes and seamless integration of modifications. Implement and perform coding of the approved solution.

Qualifications:

· Tertiary qualification in Computer Science, Information System, Computer Engineering or a related field.

· At least 3 years of professional experience as a developer

· Proficiency in back-end development using Entity Framework, C#, .NET Core, .NET Framework, MS SQL, and RESTful Web API.

· Proficiency in front-end development using Angular 2+.

· Solid understanding of databases, both SQL and NoSQL.

· Experience with version control systems (e.g., Git).

· Knowledge of containerization and orchestration technologies (e.g., Docker, Kubernetes) is a plus.

· Knowledge of Single sign-on (SSO) (e.g Microsoft Entra ID, AWS IAM) via SAML/OAuth is a plus.

· Familiarity with cloud platforms (e.g., AWS, Azure, GCP) is a plus.

· Experience in Inventory Management System, Warehouse Management System and SAP is a plus.

· Excellent problem-solving and communication skills.

· Ability to work effectively in a collaborative team environment.

We are looking for candidates who possess a robust understanding of RACF, rather than those primarily knowledgeable in MF application development. Our ideal candidate should demonstrate deep expertise in RACF and its related functionalities.

Responsibilities:

Manage and drive z/OS Unix (Mainframe Access Management operations and audits).

Lead the completion of z/OS initiatives such as MFA and straight through processing for IDM processing requests.

Automate manual processes through scripting or via zSecure.

Possess strong knowledge of designing and reviewing RACF access groupings.

Bachelor’s degree in IT or equivalent. A major in IT security or related areas would be an added advantage.

Experienced in managing Mainframe security projects, operations and implementation

Minimum of 5 years of experience in Mainframe Security (RACF) administration/operations provided by z/OS UNIX system services (USS), CICS, DB2, and WebSphere MQ with hands-on regulatory compliance knowledge.

Solid experience in mainframe security, RACF access controls, IBM zSecure, MFA

Good to have strong experience with using zSecure Admin and zSecure Audit modules.

Good working knowledge of Access Management lifecycle and processes.

Experience in banking or financial services institutions preferred

Manages and monitors all installed systems and infrastructure for the organization to be in line with company guidelines or SOP (standard operating procedure).

Assists in the coordination of various teams testing and evaluating for the development of design and its implementation of the best output.

Installs, configures, and tests operating systems, application software, and system management tools.

Ensures the highest level of systems and infrastructure availability.

Evaluates the existing systems and provides the technical direction.

Plans and implements system automation as required for better efficiency.

Deals with work process, optimization methods, and risk management tools in the given projects for the successful accomplishments according to the requirements of the stakeholders.

Computer science degree

Scripting and programming proficiency

OS and Network experience

Certification may be helpful

Operating systems Linux, IBM AIX & Solaris

Configuration Management Tools: Ansible and Puppet

Monitoring tools: ELK, Prometheus, Grafana

APM Tools:  Dynatrace & AppDynamics

Cloud Platforms: AWS, Microsoft Skytap, Azure and GCP

Scripting Languages:   SHELL BASH

IaaC Tools: Terraform, Dockerfile

Containerization:  Docker, PCF & Kubernetes.

UNIX System Administration (RHEL, AIX & Solaris), Problem Determination and solving, and experience on GPFS, PowerHA System Mirror, and VIO.

Experience in Observability and Monitoring including APM tools

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures.
• Witness and provide contractor resources to support FAT as required.
  Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

We are now seeking Field Service Engineers to perform on-site installation of systems and equipment and ongoing preventive maintenance, repair, and calibration after installation. On a worldwide basis, our engineers represent the company while servicing, troubleshooting and supervising repair of NOV equipment. They shall be proficient to make necessary repairs and minor corrections to systems as required and provide a high level of customer service for product maintenance and in-field repair.

Responsibilities:

• Performing on-site installation of systems and equipment and ongoing preventive maintenance, repair, and calibration after installation.
• Responding to requests for emergency repairs and services to troubleshoot equipment.
• Providing technical instruction and assistance to customer representatives regarding installation, operation, calibration, repair, and maintenance at customer's sites, developing and further expand technical knowledge and expertise, currently recognized industry standards for engineering ability.
• Maintaining knowledge of applicable product line warranty and accomplish effective warranty administration.
• Planning, preparing and/or instructing both internal and external training programs as required, to impart and perpetuate field engineering and/or product knowledge in area of specialization.
• Providing leadership and technical direction to skilled labor performing work on customer sites.
• Maintaining strong safety mindset to assure the executed work reflects the technical requirements within NOV safety standards
• Preparing timely and accurate technical reports for customer records and a reference for future outages.

Job Requirements/ Qualification:

• Bachelor's degree in related field or equivalent combination of education and experience.
• 5+ years’ experience in a related field is most welcome.

Technical Competencies:

• MS Office products (Word, Excel, Powerpoint, Project)
• Ability to understand hydraulic schematics. It will be advantageous if the candidate is well versed in hydraulic / mechanical systems and also have an in-depth knowledge of the of the Drilling Equipment designed by NOV.
• Preferred working experience in Reliability, Availability, Maintenance and Safety (RAMS) and application of FEMCAs (Failure Mode, Effects, and Criticality Analysis) strategies for predictive maintenance (PM) and corrective maintenance optimization.

Position Overview:

As a Sr. Staff signal integrity engineer, you will be working on challenging SI and PI tasks in globally distributed teams. You will be supporting SI/PI signoff of chip design, package design and PCB design in order to support successful delivery of products of various product lines to market. You will be working with design, test, P&R and application teams globally for modeling of chip high speed I/O and power rails. You will be supporting customers in signing off hardware design or resolving SI/PI issues where system design has constraints. You will also be involved in defining specifications of product electrical performance. You may also be involved in modeling and simulation of EMC issues.

Responsibilities:

Primary (70%):

1. Responsible for SI/PI signoff of chip design, package design and PCB design.

2. Responsible for modeling high speed I/O and PDN.

3. Responsible for customer support for PCB design signoff and issue debug.

Secondary (30%):

1. Responsible for product electrical specifications related to high speed I/O.

2. Responsible for modeling and simulation of EMC issues.

Requirements:

Experience/Skills:

1. 10+ year working experience in SI/PI

2. Deep understanding in electromagnetic theory, transmission line theory and microwave theory

3. Familiar with SI/PI design flow, time domain and frequency domain modeling and simulation

4. Good comprehension of PLL, equalization, CDR, jitter, noise, IBIS modeling, 8b10b encoding

5. Hands on with lab equipment including high speed oscilloscope, spectrum analyzer and network analyzer

6. Skilled with SI/PI simulation tools from ANSYS, Cadence, Keysight and others.

7. Skilled in data processing with script in Python, Matlab or other language.

8. Experience in MIPI D-PHY, C-PHY and PAM-4 is a plus.

9. Good communication skills and team work.

10. Education: MS/PhD

Job Responsibilities:

• Supervise all engineering works, restricted activities civil, architectural, electrical and mechanical works carried out by the Contractors/SWCs etc
• Liaise with QP(s) for technical issues and coordinate the site activities with subcontractors
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.
• Attend all meetings with Stakeholders such as Authorities, Subcontractors, etc
• Prepare Monthly Progress Report
• Ensure site safety and compliance to Authorities' requirements

Requirements:

• Candidate must possess at least Bachelor's Degree in Civil Engineering Recognised by the PE Board
• At least 5 Year(s) of working experience in construction of civil and structures for LTA/MRT Projects
• Availability for Night Shifts: Candidates must be able to work during night shifts.
• Required Skill(s): Registered engineer
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent

Responsibilities:

• Supervise/perform fault diagnosis, trouble shooting and maintenance of power system/component in workshops and onboard vessels
• Liaise with various departments within company and client to expedite the scope of work
• Lead a team of electricians in corrective and preventive maintenance
• Prepare work completion reports for Customer’s Acceptance.
• Perform maintenance works in accordance with vessel safety requirement
• Conduct in-depth troubleshooting of electrical connections and Programmable Logic Controllers (PLC) programs.
• Coordinate with vendors and partners, conduct design reviews with customers, and maintain documentation according to our ISO quality systems.

Requirements:

• Diploma in Electrical Engineering
• 2-5 years of relevant experience in the Marine related or Oil & Gas industry
• Candidate with no experience may apply
• Experienced dealing with 440V Main switchboard, Distribution Boards, Transformer, Power Generator, Main Engine, Converter, Inverter Batteries, Fire alarm & flooding system and Ship Control Monitoring & Management System
• Experience in troubleshooting on various brands of PLCs (Panasonic, Omron, Allen Bradley, Siemens, Mitsubishi, ABB, etc.) is advantageous
• Proficient in selection and integration of sensors, pneumatic systems, Stepper and Servo Motors & control systems, Power Supply Units, other electrical hard wares, etc.
• Possess man management experience in leading up to 6 men, including Supervisors and Technicians
• Willing to work as a team player to achieve assigned task within given timeline.
• Comfortable with report writing
• Able to work onboard vessels and at heights

• Other Information:
  Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Nanyang Technological University’s ANT Group – NTU Joint Lab is a collaboration between ANT International and NTU. The partnership will explore privacy-preserving methods for large language models (LLMs) and will be overseen by a joint research committee.

We are looking for a Research Engineer II to involved in research and development collaboration with industry, on AI Safety and Trust Technology, especially on the topic of applying fully homomorphic encryption in privacy-preserving machine learning. The successful applicant is expected to be familiar with fully homomorphic encryption and its applications in AI models.

Key Responsibilities:

• Research and development of trust technologies such as privacy-preserving machine learning which are important components of digital trust platforms.
• Be involved in privacy-preserving machine learning and fully homomorphic encryption system development and implementation.
• Assist in preparation of reports and scientific papers.

Job Requirements:

• Master’s degree in computer science, mathematics, information theory or related field
• Participation in privacy, security, and trust related conferences and journals
• Good programming skill, preferably with experience in implementing cryptographic algorithms.
• Be familiar with the following programming languages: C/C++
• Good communication skill, self-motivated, and could deliver under tight schedule

We regret to inform that only shortlisted candidates will be notified.

Job Summary:

• Salary range : $4500 - $5500
• Working Days and Hours: Monday - Friday (8.30am - 6pm)
• Location of work: Somerset
• 1-month completion bonus upon completion of full year contract

Job Responsibilities:

• Responsible for conducting feasibility studies, market/customer needs analysis and financial analysis for electricity, utilities and related businesses. Specifically, the duties include:
• Conducting feasibility studies (Technical) of domestic and overseas projects/ investments, including economic (cost-benefit) analysis, project/ investment appraisal and project risk analysis
• Perform technical specifications review
• Provide engineering support for future developments of the group
• Participate in regulatory and statutory approval matters
  
  Requirements:
• Candidate must possess at least a Bachelor's Degree in Engineering (Electrical, Chemical, Mechanical)
• Minimum 5 years of relevant experience in Engineering/ Construction/ Oil & Gas industry
• Strong interpersonal communication and coordination skills

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON,

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Foo Kai Jing (Fiona)
Registration Number: R2199329
EA License No: 06C2859 (MCI Career Services Pte Ltd)

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Summary

Responsible for engineering activities in product improvement/engineering projects; performs engineering analysis, equipment and process set up, carry out risk assessments and validations as well as production implementation for completed projects.

Job Responsibilities

• Participate in product improvement/engineering projects, and responsible for engineering activities.
• Take the lead in problem solving and action planning in project management.
• Perform risk analysis (FMEA) to define process flow and control plan.
• Perform equipment qualification and process validation for product improvement/engineering projects.
• Provide technical advice and guidance to junior engineers and other departments.
• ·Ensure projects are implemented in line with the schedule and budget.
• Optimize new/improved process parameters to further improve product quality and the overall equipment effectiveness.
• Explore new process to improve product quality or productivity.
• Be responsible for the successful transfer of new/improved process/methodologies into the production with good process margins and inline controls.
• Involved in hands-on execution of manufacturing operations.
• Provide operational training for operators or related personnel.
• Manage administrative duties as well as ad-hoc projects assigned by immediate superior.

Job Requirements

• Minimum a Bachelor Degree in Mechanical/Industrial/Manufacturing/ Biomedical Engineering related disciplines or equivalent.
• Good mechanical or material aptitude and knowledge.
• Good experience of manufacturing process and cGMP manufacturing.
• Experience of operational management and lean manufacturing.
• Clean room/environment control experience.
• At least 2 years of working experience in the related field.
• Excellent English-speaking & writing skills
• Multi-lingual: Chinese (Mandarin) to liaise with Mandarin speaking counterparts, other languages are an asset
• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
• Ability to write professional reports, business correspondence, and procedure manuals.

Work Location

36 Jalan Tukang

Singapore 619266

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Engineer

Internal Code: A24013

What will you do?

• We develop the Smart Nation infrastructure and applications and facilitate collaboration with citizens and businesses to co-develop technologies.
• Join us as we support Singapore's vision of building a Smart Nation - a nation of possibilities empowered through info-communications technology and related engineering.
• Our objective is to catapult our government infrastructure into the new digital era with faster time to market, operational agility, automated deployment and scalability.
• We are an agile development and operations house that is bold, agile and collaborative.
• The team is responsible for designing, prototyping, building and operating different products and services.
• As a Software Engineer (frontend), you will help to level up the team's competency with your valuable past experiences.
• Experiences of failure are just as important as those of success.
• You will drive, implement, deploy, maintain and operate products or key components of your products. You will work closely with different teams to deliver the best possible and impactful solutions.
• If you are looking for opportunities to collaborate with leading industry experts and be surrounded by highly motivated and talented peers, we welcome you to join our team. Make a difference by taking up the key role and be part of the passionate and inspirational team.
• Ownership over feature design and implementation, with a focus on sound technical choices and maintainability. At times, this would be in collaboration with other software engineers.

What are we looking for?

• From 3 - 5 years of relevant experience
• Proficient in JavaScript, TypeScript
• Experience in frontend technologies (HTML & CSS etc) as well as any web framework (React Preferred), understand their design principles and application scenarios; and have good practise and understanding of common web compilation and bundling frameworks, including Webpack/Rollup/Babel/AST.
• Familiar with various front-end related debugging and testing tools, and have independent problem-solving skills
• Contribute in technical discussions and solutioning sessions.
• Possess good coding and documentation habits, pay attention to code style, familiar with basic design patterns and principles, and continuously focus and optimize projects
• Autonomy to drive the direction of the product
• Chance to work on creating developer tooling systems from the ground up, from research all the way to implementation.
• Chance to work with different development teams while enabling them to be more productive at the same time
• Excellent teamwork and communication skills; communicating technically complex ideas to non-technical people effectively is a plus
• Having a growth mindset and willing to share knowledge to grow together with the team
• Enjoy making data driven decisions
• Understand that problems can be solved in different ways, sometimes not with engineering; understand how these solutions can and should be evaluated.
• Willing to learn and own fullstack

If would be a plus if you have:

• Experience in fullstack or backend JavaScript (Node.js)/TypeScript or other backend frameworks
• Experience with automated testing
• Experience with deployments cloud infrastructure such as AWS, Azure, or Google Cloud
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is strongly preferred.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Engineer

Internal Code: A24121

What will you do?

• Build prototypes to demonstrate technology opportunities
• Design system architectures
• Write production quality code
• Manage deployments to cloud and (occasionally) on-premise infrastructure
• Learn and share knowledge in a multi-disciplinary team

What are we looking for?

• Experience with modern web applications in JavaScript (ES 5/6) is a must-have
• Experience in creation/maintenance of APIs using Node.js is highly advantageous
• Experience in front-end development with React.js is highly advantageous
• Experience in automated testing using JavaScript testing frameworks/libraries such as Karma, Mocha, Chai and Sinon is highly advantageous.
• Experience with database management/usage (both relational and non-relational), and handling of data in different environments is highly advantageous.
• Experience in feature testing using a Selenium-based framework is a nice bonus.
• Experience in tooling processes for modern web applications using Webpack and Gulp is a nice bonus.
• Experience in using Docker containers, development of CI/CD pipelines, and deployment using cloud services such as AWS/PasSes/your own private servers is a nice bonus.
• Experience in the software development lifecycle in an Agile context is a plus point.
• Experience in Scrum is a plus point.
• Passion for creating products
• Keen sense of learning and self discovery
• Willingness and capability to impart knowledge
• High level of self awareness
• Ability to self manage
• Growth mindset
• Minimum 2 years experience (or equivalent level of skill/confidence) with modern web applications using JavaScript.
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is strongly preferred.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

The Advanced Remanufacturing and Technology Centre (ARTC) is a public-private partnership consortium of more than 80 industry members. Our core mission is to develop and deploy advanced manufacturing solutions and upskill the workforce to drive local industry competitiveness.

Smart Virtual Systems (SVS) Group is seeking a highly motivated Senior or Lead Research Engineer to implement highly available and scalable microservices-based applications and platforms for autonomous manufacturing applications. He/she is expected to be independent and initiative-driven, demonstrating the capacity to discover innovative solutions to challenges. We are seeking a talented and experienced Software Engineer with experience in MLOps/AI to join our dynamic team. In this role, you will play a key role in software development and focusing on deploying machine learning models, implementing MLOps best practices. You will closely work with our cross-functional research teams to streamline model deployment, improve scalability and reliability of systems.

The key roles and responsibilities include the following:

-Develop, test, and maintain enterprise system and applications, with a focus in ML/AI systems.

-Implement MLOps best practices to automate model training, deployment, and monitoring processes.

-Optimize and Implement machine learning algorithms and deep learning architectures.

-Collaborate with data scientists and software engineers to integrate machine learning solutions into existing systems and deliver high-quality software products.

-Optimize AI pipelines for scalability, reliability, and better performance.

-Conduct performance analysis and optimization to improve model efficiency and accuracy.

-Stay updated on the latest advancements in software engineering, AI/ML technologies and best practices.

Job Requirements

-Bachelor or Master's Degree in Computer Science/Engineering or relevant Disciplines

-Must have a minimum of 8 years of experience as a Software Developer/Engineer

-Hands-on experience in Cloud Native Technologies such as in micro-services, DevSecOps, and Containerization Technologies

-Proficiency in designing and developing microservices and software systems using C# .NET, Python and angular

-A good understanding of CI/CD Pipelines in a distributed environment using Git, Artifactory, Jenkins, SonarQube, Docker registry, etc.

-Hands-on experience with deploying and managing microservices using container orchestration platforms (on-prem/public cloud)

-Can do attitude and happy to interface with multiple stakeholders

-Excellent troubleshooting, follow-through, and problemsolving skills, with attention to detail

-Excellent verbal and written communication skills

-Familiarity with deep learning architectures and natural language processing (NLP) techniques.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scopes & Responsibilities

• Support NPI and Site projects as Engineering Technical Lead or Subject matter experts for process equipment
• Provide technical expertise in site selection assessment to identify equipment/facility gaps, select new equipment, assess layout/utilities capacity and partner project managers to develop project cost and schedule
• Perform assessment for equipment during new product introduction, change controls and other qualifications activities to ensure equipment are in its validated state
• Subject matter expert for process equipment performance and operation to ensure safety, compliance and sustained operation
• Lead and participate in technical transfer activities and cross-functional meetings
• Work independently and/or with project managers to complete engineering projects of various scales within schedule, budget and quality constraints
• Effectively manage and work with project CQV team to ensure timely delivery of projects
• Responsible for commissioning and qualification activities including FAT, SAT, PSSR, automation checkouts, IQ, OQ, PQ, and asset/preventive maintenance/spare parts creation for new process equipment
• Participate in the system walk-down, ensure the closure of punch items and support the takeover of the system from the project team
• Work closely with project managers to introduce new equipment including development of business case, project charter, user requirement specifications, quality risk assessments, conceptual design, preliminary design, design specifications and detail design
• Participate in design review and setup up of new asset and associated maintenance plan/spares in Maximo
• Work with research, manufacturing, process development, utilities, facilities, quality assurance and validation departments in developing requirements and recommendations for large and/or highly complex system/facility modifications
• Responsible for investigation of deviations, development of corrective and preventive actions and implementation of change controls in a timely manner
• Develop, implement and optimize maintenance and reliability activities such as preventive maintenance, job plan and datasheet development in Maximo
• Benchmark equipment performance (e.g., reliability, productivity) and determine improvement plans
• Periodically review and/or improve equipment safety, maintenance strategy, spare parts, and other continuous improvement opportunities to enhance reliability
• Responsible for management and oversight of team of CQV engineers
• Develop the best team by coaching and mentoring engineers to develop their technical competency and leadership skills

Qualifications

• Doctorate degree in Engineering OR
• Master’s degree in Engineering and 4 years of directly related experience in a pharmaceutical manufacturing site OR
• Bachelor’s degree in Engineering and 8 years of directly related experience in a pharmaceutical manufacturing site
• Able to work independently with minimal of no supervision
• Experience in managing various stakeholders expectations related to process equipment in biopharmaceutical
• Good communications skills, both oral and written, including presentation skills
• Good interpersonal and facilitation skills necessary to forge consensus among competing client interests while ensuring objectives are met
• Strong analytical skills and knowledge of industry trends to identify potential improvement opportunities. Ability to combine technical problem-solving skills with business acumen to determine best business solution
• Working knowledge of biopharmaceutical processes such as chromatography, buffer / media tanks, viral filtration, tangential flow filtration is preferred. Process knowledge on inoculation, bioreactors, harvest, single use technologies and critical utilities will also be considered
• Experience in validation processes such as generation/execution of Installation/Operation/Performance qualification documentation
• Knowledge in Automation systems and processes such as RD’s, Delta-V, BMS, ladder logic and PLC
• Demonstrated project management skills (schedule/cost development, facilitation, collaboration, basic project management, completion and follow-up) and application of concepts
• Problem solving skills requiring the application of scientific and engineering theory and calculations and creative skills in the development of hypotheses and approach
• Flexibility to work off-hours
• Knowledge of Total Productive Maintenance, Reliability Centered Maintenance concepts is an added advantage