Responsibilities:

- Repairing, inspection, commissioning/installation of steam-and gas turbines and rotary machineries for ships and power generation. Cryogenic equipment services. Bulk material handling.

- Automation service and calibration. Control system service/trouble shooting (PLC). Boiler auto-combustion control and auto feed water control and burner overhauling.

- Willingness to work hands-on in marine, oil & gas industrial environment and work overtime (will be paid).

- Able to travel overseas (paid allowance) at short notice.

Requirements:

- Higher Nitec/Diploma/Degree or equivalent in Mechanical Engineering, Marine Engineering, Automation & Instrumentation/Mechatronics.

- With or without experience in related industry or sea-going experience.

- Good communication skills at all levels, from workers to Chief Engineer/Supt.

- Good command of English to write Service report and able to speak Mandarin with overseas clients.

- Working hours: 5 day/week 0800-1700 hours.

Interested candidates, able to speak English & Mandarin a must to liaise with overseas clients. Also written Service Report in English.

Please email resume with photo to [email protected]

Job Description:

We are seeking an experienced and detail-oriented Electrical Engineer specializing in the design, configuration, and troubleshooting of electrical control panels. The candidate will be responsible for ensuring all control systems are designed and maintained in compliance with industry standards and project requirements.Should be avaliable 24/7.Should able to work overseas. Should have class 3 Driving Licience 5 years experience in Singapore.

Key Responsibilities:

• Design and Drafting: Develop detailed electrical schematics, wiring diagrams, and layout drawings using AutoCAD or equivalent CAD software. Ensure adherence to applicable codes, standards, and safety regulations (e.g., NEC, IEC).
• Component Selection and Sizing: Calculate and size electrical components such as circuit breakers (CB), relays, contactors, and cables. Specify and integrate control devices like PLCs, VSDs, VFDs, HMI panels, and temperature controllers.
• Control Panel Assembly: Oversee the assembly, wiring, and testing of control panels, ensuring accuracy and quality. Work closely with technicians to provide guidance and address any assembly issues.
• Troubleshooting and Maintenance: Diagnose and resolve electrical and control system issues in a timely manner. Implement corrective actions and preventive maintenance strategies for control systems.
• Programming and Integration: Develop and modify PLC and SCADA programs for control system applications. Ensure seamless integration of control systems with other automation and instrumentation devices.
• Testing and Commissioning: Perform functional testing and validation of control panels and systems. Commission control panels on-site, including configuring and calibrating field devices and instrumentation.
• Project Management: Coordinate with project managers, clients, and other engineering disciplines to ensure project objectives are met. Prepare technical reports, documentation, and user manuals for control systems.

Qualifications:

• Bachelor's degree in Electrical Engineering or a related field.
• Minimum of 7 years of experience in control panel design, assembly, and troubleshooting.
• Proficiency in AutoCAD or equivalent CAD software.
• Strong knowledge of electrical standards and regulations (e.g., NEC, IEC).
• Hands-on experience with PLC and SCADA programming (e.g., Allen-Bradley, Siemens, ABB).
• Excellent problem-solving skills and attention to detail.
• Ability to work independently and as part of a team.
• Strong communication skills, both written and verbal.

Job Description:

Be part of an exciting Team working on cutting-edge advanced packaging process technologies. Partner and work with various FAB users, to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production. Responsibilities will also include assisting in operations support in FAB clean rooms to make sure all rounded supports are provided.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, and professional individual.
• Oversee the Team spare/ chemicals / inventories stores – upkeep with good house-keepings, periodic cycle counts. Maintain the inventory database, ensuring timely and accurate recordings, raise purchase requests accordingly.
• Take charge and provide day to day supports in all logistics needs and initiate material/spare parts procurement when required to ensure smooth Fab operations.
• Accountable for the inventory movements required to enable smooth lot operations across IME Premises.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time.
• Work seamlessly with various stakeholders to provide logistics support and deliver inventory on time.
• Work towards and employ critical thinking, put-up good initiatives to move forward to digitalization.
• Ability to work in a multi-task environment.

Experience:

• Education: Diploma in engineering discipline. Preferably in supply chain logistic/ warehouse operations.
• At least 2 years of warehouse operations.
• Preferably some experience in semiconductor / manufacturing environment, with good wide contacts with semiconductor material suppliers, equipment vendors.
• Strong knowledge-based on excel skills and some knowledge of supply chain analytics.

Main Responsibilities

· Responsible for the assembly, debugging of stations and installation duties as required

· Responsible for pre-alignment stations with guidance from Manufacturing Manager

· Run machine during debug with guidance from Manufacturing manager

· Follows direction from Project Manager on prioritization.

· Provide technical training to customer which includes mechanical hardware & pneumatics, product change-over procedure, critical setup/alignment and preventive maintenance.

· Support installation process at customer site

· Prepare manufacturing documentation as part of the project documentation for projects.

· Be responsible to meet the budget and deadline of pallets and critical stations

· Collaborate with other Project Engineers to streamline activities and share technical difficulties

· Other tasks assigned by line manager

At InnoEdge, we work with organisations to protect them from cyber threats. We help detect new unknown cyber threats through research, fortify networks, and defend critical information infrastructures. Based in Singapore, our team consists of cybersecurity experts who use the advanced techniques and technologies to deliver cutting-edge solutions and services.

InnoEdge believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Collaboration is key to our success. We prioritise open communication, constructive feedback, and a willingness to help others. We are committed to creating a supportive work environment that encourages excellence, innovation, and continuous improvement. We're looking for individuals who share our values and are excited to join us on our cyber mission.

Responsibilities:

• Design, build and deploy high performance web applications and APIs
• Design client-side and server-side architecture
• Build the front-end of applications through appealing visual design
• Develop and manage well-functioning databases and applications
• Write high-quality code with unit, functional and end-to-end tests
• Perform architectural/technical design, technical prototyping, development, and reviews
• Communicate and negotiate technical solutions and architectural designs with diverse stakeholders
• Lead technical work and integration efforts across teams and products
• Staying abreast of developments in web applications and programming languages
• Provide technical mentorship to junior staff in the team.
• Perform occasional travel to remote sites to assist the support engineer in troubleshooting, or to accompany the product manager as a pre-sales engineer

Requirements

• At least 5 years of hands-on experience in modern web apps using JavaScript/Java/python or relevant experience in a software development team where the product goes into production
• Be a team player with good communication skills
• Demonstrate ability in full stack deployment of web applications
• Experience in designing and implementing RESTful API design
• Experience in the software development using agile SCRUM
• Experience in the following web application framework software / solution stack:

o Java Spring Boot

o ReactJS (knowledge of VueJS would be considered a bonus)

o Python

o Shell scripting

• Experience in the following would be a bonus:

o Git/Github, Elasticsearch, and Kibana

o Experience with threat hunting, Snort, and Arkime domains

o RHEL hardening expertise

o Networking skills, including configuring switches as network brokers

o Docker containers, development of CI/CD pipeline

o Designing and implementing microservices architecture

If you meet these qualifications and are passionate about software development and cyber security, we encourage you to apply for this exciting opportunity. We offer competitive compensation, a comprehensive benefits package, and a collaborative and dynamic work environment.

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Perform daily management and abnormal lot deposition of diffusion equipment including implanters, vertical/horizontal furnaces, RTO/RTP platforms, Laser RTP systems, single wafer CVD and EPI.
• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS
• Diagnosing end-user system failures and implement repair solutions.
• Diagnosing printer and other peripheral devise failures and implement repair solutions.
• Troubleshooting network devices in order to ensure connectivity from the PC to the Network.
• Providing installation and upgrading services of hardware and software.
• Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs.
• Setup and troubleshooting audio/video equipment such as projectors and video conference equipment

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 1-1.5 years of relevant working experiences.
• Knowledge of multiple manufacturers and operating systems.
• Excellent troubleshooting capability.
• Using established procedures and working under immediate supervision, performs assigned tasks.
• Work is routine and instructions are usually detailed.
• Resolves routine questions and problems and refers more complex issues to higher levels.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Sustainability Engineer (ESG) to be part of our Supply Chain Department diverse team of talent. You will be responsible to support Company’s Environmental, Social and Governance (ESG) projects.

What you will be working on:

Project Management

- Lead and manage ESG projects & initiatives from inception to completion, ensuring alignment with corporate sustainability goals.

- Develop project plans, timelines, and budgets, and coordinate resources effectively.

- Prepare Capex Justification presentation in an accurate and timely manner to facilitate Management Team decision making

- Project lead in a cross functional team to ensure project schedule is executed in a timely manner and meeting project budget

Supply Chain

- Assist and take lead to drive the initiatives especially on Scope 3 Emissions

- Assess and quantify upstream and downstream emissions from the organization’s value chain, including suppliers, products, and waste disposal.

- Collaborate with suppliers and partners to develop and implement emission reduction initiatives, such as sustainable sourcing practices and transportation efficiency improvements.

- Review Supply Chain SOP & OI and ensure they are updated to ESG requirements

Reporting and Compliance

- Support Supply Chain Department on Company’s requirements for reports on sustainability metrics, including greenhouse gas emissions, energy consumption, and waste generation.

- Ensure compliance with regulatory requirements and industry standards related to sustainability and environmental management.

- Handle Compliance, Internal, Exernal and Customer audits to ensure compliance

- Liaison with related government bodies on grant and commercial apects

Continuous Improvement:

- Monitor and evaluate the effectiveness of sustainability initiatives and recommend improvements based on data analysis and industry best practices.

- Stay updated on emerging trends, technologies, and regulations in sustainability and incorporate relevant advancements into project strategies.

More about you:

• Degree in Chemical/Gas, Mechanical, Environmental, health and safety & other engineering.
• Possess knowledge on ESG, IPCC, RCA
• Preferably 4-5 years purchasing experience or engineering experience in a front end semiconductor plant .
• Knowledge and relevant experiences in Conflict Mineral, Green Procurement is a bonus.
• Knowledge in handling audits for Scope 1 emissions is a bonus

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

JOB HIGHLIGHTS

· Machine design in Mechanical aspect, Jig and Fixture, Equipment and development

· Provide Conceptual, mechanical part detailing and cost estimation

· BOM & machine manual writing

· Handle customers’ enquiries and issues

· Conduct machine acceptance with customer

· Co-ordination with sub-contractors for machine build

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

REQUIREMENT

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

· Able to work independently and within schedule

Geekplus is a global leader in mobile robotics technologies, providing innovative solutions for order fulfillment. With over 1,000 industry leaders using our systems, we deliver flexible, reliable, and efficient automation for warehouses and supply chains. Founded in 2015, Geekplus has more than 1,500 employees and offices worldwide, including in the US, Germany, the UK, Japan, South Korea, Mainland China, Hong Kong SAR, and Singapore.

------------------------------

We are looking for a Service Engineer to join our team. Are you someone who is driven by curiosity and craves a good challenge? Join us and be part of this exciting adventure!

What you have to do

• Serve as the site supervisor, overseeing and conducting relevant site activities during project implementation in the APAC region
• Collaborate closely with project managers, contractors, and suppliers to manage overall site performance
• Prepare daily on-site logs and records for customer and internal team reviews
• During the service phase, conduct preventive maintenance and perform root cause analysis of production issues using diagnostic tools
• Prepare a training manual and provide training and support to customers and other external parties

What you need to have

• A bachelor's degree in mechanical engineering or related disciplines
• Solid experience in equipment/hardware installation, maintenance, and site supervision
• Knowledge of Warehouse Management Systems, or other related logistics systems
• Proficiency in AutoCAD and Microsoft Office
• Good IT skills, including knowledge of network infrastructure, is a plus
• Frequent travel is required

------------------------------

What we offer

• Young and energetic work culture
• Opportunities for global mobility
• Double pay plus attractive performance bonuses
• Medical and dental coverage
• 14 to 21 days of annual leave
• Cozy office environment with refreshments
• Location: Tampines Plaza

If your qualifications, experience, and aspirations match our requirements, please send your resume with your current and expected salary to us. All information and materials submitted to Geek+ will remain strictly confidential and be treated for recruitment purposes only. Only short-listed candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Research Engineer will be involved in developing computer models for assessing climate change impacts on marine ecosystems. He/she will also be involved in collecting field data for calibrating and validating model systems. In addition to the above, the Research Engineer is expected to also participate actively in research meetings, present research findings, write reports and research papers.

Job Requirements

• Possess at least a good Bachelor’s degree in Civil and/or Environmental Engineering or equivalent.
• Experience in computational modelling in environmental engineering or climate change is preferred.
• Open to fixed term contract

Duties and responsibilities:

Planning and organizing construction projects, including developing project timelines, budgets, and resource plans.

Ensuring that all construction work is carried out in compliance with building codes, safety regulations, and other legal requirements.

Managing project teams, including architects, contractors, and other stakeholders, to ensure that projects are completed on time and within budget.

Monitoring project progress and making adjustments as necessary to ensure that projects are completed on time and within budget.

Collaborating with architects and other stakeholders to develop project plans and specifications.

Developing and implementing quality control procedures to ensure that construction work meets the required quality standards.

Providing technical guidance and support to project teams, including architects, contractors, and other stakeholders.

Maintaining accurate project records and documentation.

Develop and manage project schedules, budgets, and resources

Coordinate with architects, engineers, and contractors to ensure project success

Review and approve project plans, specifications, and contracts

Ensure compliance with building codes, safety regulations, and environmental requirements

Monitor project progress and make adjustments as necessary

Communicate project status to stakeholders and senior management

Manage project risks and identify opportunities for improvement

Provide technical support to project team members

Ensure quality control and quality assurance for all project deliverables

Lead project meetings and facilitate communication among team members

Assist in the development of cost estimates

Assist the project team with site safety documentation and coordination

Assist the project team with closeout of the project

Assist project accountant with monthly subcontractor billings and pay applications

Assist project manager with assigned tasks

Requirement:

Bachelor's degree in Civil Engineering or related field

Minimum of 5 years of experience in construction project management

Strong knowledge of construction materials, methods, and regulations

Excellent communication and leadership skills

Ability to manage multiple projects simultaneously

Proficiency in project management software and tools

Experience in managing large-scale construction projects

Ability to read and interpret blueprints and construction plans

Knowledge of budgeting and financial management

Experience in managing and supervising construction teams

Strong problem-solving and decision-making skills

(a) Checking the logs of the network equipment and network links every morning to ensure no abnormal activities;

(b) Install, maintain and upgrade all hardware, firmware and software used;

(c) Apply software and security patches as prescribed in Part 2C Patch Management Requirements;

(d) Fine-tune the network or system parameters;

(e) Patch/Re-Patch cables in patch panels, network points and all network equipment;

(f) Labelling of cables, patch panels, racks and equipment;

(g) Create, delete or modify access rights for the network equipment related user accounts in terms of authentication, authorisation and accounting;

(h) Connect Customer-approved network equipment to the Customer’s network;

(i) Manage IP addresses and IP assignment scheme;

(j) Manage firewall rules setting and security configuration e.g. add, delete or modify firewall rules, change encryption keys;

(k) Perform troubleshooting to resolve network issues;

(l) Manage incidents as specified in Part 2D Service Management Requirements;

(m) Document and maintain configurations of all network hardware, cabling information and software used in the operating environment;

(n) Perform routine backup of network configuration for network equipment including firewall rules;

(o) Perform NAC ClearPass administration for security posture check enforcement which minimally includes the following tasks:

(p) Analyse network utilization pattern and problems, recommend and implement corrective and preventive measures;

(q) Recommend new or improved hardware, software, configurations, etc. to enhance the existing system performance and management;

(r) Assist the Customer to evaluate new hardware and software for implementation in the operating environment, when required by the Customer;

(s) Enforce physical access controls to the network room and the equipment, including escorting its own Sub-Vendors and the Customer-appointed Supplier, and maintaining proper management of keys and access logs at all times; and

(t) Provide standby and support service for network upgrades, network implementation or building maintenance activities such as testing and servicing of building power generators, Uninterruptible Power Supply (UPS), air-conditioning and fire suppression systems, which may affect the

operation of the equipment in the network rooms.

Requirements-

· Network technologies and protocols;

· Network configuration;

· Network utilization and performance monitoring;

· Network fine-tuning, incident troubleshooting, interpretation of statistics and traffic pattern;

· Firewall rules configuration and security setting; and

· IDS/IPS, CDN implementation and IPv6;

· Familiar with Cisco and Alcatel and Palo Alto

Network support engineer shall have at least three (3) years of hands-on experience in configuring routers/switches (e.g., Cisco and Alcatel), firewalls, and intrusion detection/protection systems.

The network support engineer shall minimally have the Cisco Certified Network Engineer

certification, or equivalent, and have experience in WAN implementation.

What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Espressif is looking for both junior and senior Embedded software engineers who will participate in projects related to wireless protocol stacks (Wi-Fi / Bluetooth / 802.15.4) or multimedia solutions (algorithms / protocols / applications of video/audio).

To design and develop Espressif's AIoT Chips, SDKs, and solutions. You will be responsible for:

1. Design and develop wireless protocol stacks such as Wi-Fi / Bluetooth / 15.4 and coexistence among them.

2. Develop multimedia algorithms such as H264, JPEG, and audio codecs; Develop multimedia protocols such as DLNA, and VOIP; Develop other components used in Multimedia SDK.

3. Design and implement embedded multimedia solutions based on Wi-Fi/Bluetooth Chips and SDKs, such as voice-controlled loudspeakers and IOT devices.

4. By analyzing, positioning, and solving customer problems, better assist customers in completing product and project development.

Job Requirements:

1. Bachelor’s degree or above, majoring in Computer, Electronic Engineering, Communication, Automation, and other related majors.

2. Proficiency in C/C++ language.

3. Familiar with at least one scripting language, Python is preferred.

4. Familiar with FreeRTOS or another RTOS.

5. Minimum 2-3 years working experience

6. Knowledge of hardware communication protocols: SPI, UART, I2C, I2S.

7. Keen interest in the development of single-chip microcomputers and protocol stacks, experience in complete embedded-related projects or embedded-related competitions is a plus.

8. Have a solid technical foundation for embedded software development, experience in ESP8266 / ESP32 development is preferred.

Who We Are

We are an Artificial Intelligence (AI) venture backed by Shell, a multinational energy major, dedicated to tackling the most complex issues in the energy sector through groundbreaking research and development in AI and Data Science. Founded in Singapore, our ultimate goal is to establish ourselves as the leading hub for AI and Data Science R&D in Southeast Asia.

We are looking for a Software Engineer to join our dynamic team. As a Software Engineer, you will work on designing, developing, and improving key components of the technology stack related to AI, data engineering, high-performance computing (HPC), and geophysics, among other specialized topics We are looking for people from various development backgrounds but most importantly for someone who is passionate about solving challenging problems and can think out of the box.

Responsibilities

• Design, develop, and improve key components of the technology stack in high-paced, high-impact real-world projects.
• Apply the technology to real work and high-impact client projects.
• Maintain high code quality standards and be accountable for the work delivered.

Requirements

• Bachelor's or Master's degree in Computing, Science, or Engineering with 2 years of software development experience.
• High proficiency in Python is a must. Experience in C, C++, Rust, or other programming languages is a plus.
• Good aptitude for abstract thinking and problem-solving. Good understanding of complex algorithms and data structures.
• Experience is required with essential development tools such as git, Linux Shell Scripting, vim/emacs, etc.
• Experience with parallel computing, system programming, full-stack development, and web development can be a plus.
• Ability to work effectively in a fast-paced environment with high expectations.

Benefits

Why Join LRD?

LRD offers a conducive work environment in a company culture that values authenticity, integrity, technical skills, teamwork, and results. Here are some of the opportunities offered by the position:

• You are always presented with new challenges to solve intellectually stimulating problems. The work never gets stale, mundane, or boring.
• Continuous learning opportunities to develop your technical expertise in many subfields of AI, ML, HPC, Geoscience, Engineering, etc.
• Your work will have an immediate impact on high-impact real-world problems such as natural resource exploration and energy security.
• Have your work recognized with publication opportunities in top scientific conferences and journals.
• Be rewarded for your contributions with high-performance bonuses well above the market rate.
• Friendly and casual working environment.

.Supervise project team and sub-contractors to take positive actions and accountability for their assigned work and complete their works on time as per agreed.

· Liase with Client, Consultants and Project team for planning, executive and completion of projects.

· Manage and supervise the team of technical staff and subcontractors carry out maintenance services, schedules, improvement works . To make sure standards of building performance, quality, time and cost schedules and safety complied.

· Leading monthly meetings and submission of routine reports.

· Oversea and overall responsible for works carried out by Junior Supervisors assigned.

· Responsible for keeping daily work schedule.

· Attend regular meetings with client , supplier and sub-contractors.

· Analyze, manage and track projects costs against budget

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Ensure all monitoring system of the building management faciities are in good operating condition (error free) and feedback on all alarms and errors generated form BMS.
• Perform scheduling of facilities and building management services to facilitate events and arising requirement.
• Reporting and compilation of daily, feedback, building management facilities faults and activities.
• Operate the plant at the most efficient operating condition and ensure all abnormities are reported for corrective actions
• Validate all facilities & Building management maintenance work carried out by the contractors and ensure compliance to the prescribed standards
• Perform routine building management facilities activities including inventory control. Critical systems checks and functional testing. Able to respond and take action in response to facilities crisis management activities including: power outages, fire alarms, ACMV outages.
• Analyse data and identify trends with facility issues to determine root cause and take appropriate action.
• Responds to BMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Provide technical support to all aspects M&E operations including the operation, maintenance and repair of all mission critical equipment and systems supporting a 24x7 activities to achieve 100% uptime and 100% compliance with all customer SLAs.
• Assist in all site construction activities and installations, in coordination with external contractors to ensure system design, installation and testing adhere to operational standards. Witness testing of all equipment during commissioning and validate sequence of operations and receipt of all operational documentation.
• Maintain compliance with local workplace safety & health (WSH) standards and local electrical and building codes.
• Ensure adherence to all standard operating procedures (SOP) and emergency response procedures (ERP) established for the critical environments, as well as the formal change control process.
• Participates in the building management maintenance of all significant planned and emergency maintenance events for the facility and ensure these activities are executed in a controlled and proven method to ensure the reliability of the critical loads supported by these systems.
• Participates in cross functional coordination

• Higher Nitec / Diploma / Degree in Mechanical or equivalent.
• Minimum 3 years' of practical electrical and mechanical engineering experience in managing and implementing electrical & mechanical systems for critical building management facilities for telecom, broadcast or data centre buildings.
• Respect, Teamwork and Drive.
• Hands on Troubleshooting
• Stay contactable 24 x 7
• Perform rotation Shift duties

You’ll get to:

• As a Quality Engineer, you have the opportunity to accelerate the delivery and to improve the quality of the software we build through recommending and implementing automated test suites.
• Work with vendors, government agencies and teams to identify end-to-end test scenarios as well as to automate these test scenarios, applying risk-based strategy to minimize manual interventions.
• Analyse and decompose complicated software systems and design a strategy to test these systems.
• Review Quality Assurance Plan and Test Strategy to provide timely and meaningful feedback.
• Ensure all required testing documentations are in place as part of production preparation checks.
• Drive and advocate continuous improvement in testing practices and tools.
• Conduct research on emerging test automation technologies that can optimize and accelerate the project delivery.

What you’ll bring to the team:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines
• Minimum 5 years' experience in application exploratory testing and regression test automation, application performance testing, and/or application security testing. Hands-on experience in automating various types of tests such as unit tests, API tests, Integration Tests, UI Tests, and End-to-end Tests.
• Create and support test automation strategies and implementations
• Knowledge of test best practices, test methodologies and their corresponding tools.
• Must have strong troubleshooting and debugging skills
• Meticulous attention to details
• Strong analytical, interpersonal and presentation skills
• Keen to share knowledge with team mates
• Curious, open to new ideas
• Quick to learn new skills
• Proactive, self-driven and motivated

Bonus points for:

• ISTQB, CSQA, CSTP or other relevant certification
• Excellent verbal communication and listening skills
• Experience in agile development environment will be an added advantage
• Experience in DevOps will be an added advantage
• Experience in Performance testing will be an added advantage

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Industrial Engineer to be part of our Industrial Engineer Department diverse team of talent.

What you will be working on:

• Maintain and improve capacity planning methodologies to ensure accuracy
• To achieve planned mix & capacity through equipment utilization improvement/conversion/other capacity improvement plans to ensure the plans meet operations goals
• Establish layout plans for all production equipment based on operation needs
• Ensure timely equipment installation/release for production to meet operation’s needs
• Initiate Tool-to-Tool Matching (Golden/Lemon) as well as Best-In-Class benchmarking to strie for the best perforamnce of the tools
• Update/maintain tool capacity/productivity database for capacity planning & productivity indices tracking
• Manage capital budget to reflect necessary equipment requirement for capacity mix and new technology introduction
• Establish standard costing methodologies & wkly/qtly/annual standard costing
• Cost management (forecast/tracking/improvement/modeling/analysis/benchmarking)
• People productivity management/coordination
• Initiate/lead/drive continuous improvement projects & Best-Known-Method sharing
• Strategic planning initiatives for capacity expansion, tool/people productivity improvement & cost reduction
• Lead/coordinate people productivity/automation initiatives. Headcount modelling
• Business Continuity Management and Risk assessment
• Enhance current systems, improve methodology & modelling
• Coach/mentor & train new Engineers/Associate Engineers

More about you:

• Degree in Industrial Engineering/ Mechanical/ Manufacturing
• Functional / Technical skills and knowledge: Knowledge in semiconductor processes and IE tools used in the semiconductor industry
• Computer skills : MS Office, MS Access, VBA, SQL, Oracle, Cognos, AutoCAD
• Strong communication and presentation skills
• Team player with strong problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Site engineers are responsible for planning, marking out and levelling construction sites before any building work takes place. They also build roads, drainage systems and other vital facilities to make sure construction projects go off without a hitch.Organizing materials and ensuring sites are safe and clean.

• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

ABOUT AirLab

The Aviation Innovation Research (AIR) Lab

The joint CAAS-Thales innovation lab known as ‘AIR Lab’ started to operate on 1st November 2019 with the objective to develop Proof of Concepts (POCs) or Minimum Viable Products (MVPs) of advanced and open technologies for future Air Traffic Management (ATM). Currently, the joint lab employs a team of 40 Thales engineers and 12 CAAS engineers and air traffic controllers operating in a vibrant ecosystem involving several Singaporean SMEs and start-ups, as well as key research institutes.

Thales engineers include 10 domain experts – with more than 10 years of experience – coming from Thales ATM centers of competence in France and Australia. These experts are coaching both the local Thales and CAAS engineers.

ROLE DESCRIPTION SUMMARY

As a Backend Software Engineer at AIR Lab, you will thrive if you have a passion for coding, designing, and engaging in discussions about APIs and data processing, including areas like data modeling, stream processing, and data quality control. You take pride in both the quality of your technical implementations and the overall delivery. You enjoy collaborating with a diverse team, bringing together various ethnic and cultural perspectives.

You are eager to dive deep into technical challenges, identify solutions, and effectively communicate your findings, helping the team learn and grow. You are enthusiastic about exploring new technologies and finding innovative ways to apply your knowledge. You also inspire and motivate your teammates to embrace continuous learning and take an active role in all aspects of engineering activities at AIR Lab.

KEY ACTIVITIES AND RESPONSIBILITIES

As aSoftware Backend Engineer, you are accountable for:

• Design and build APIs to provide data for the stream-aligned squads.

• Implement features and associated automated unit and integration tests. If appropriate implement security and load tests.

• Improve and maintain the DataLake cybersecurity posture w.r.t data governance and cybersecurity standards by working with other stakeholders (e.g., Data Architect, Data Assessment Office, Cybersecurity Office).

• Improve and maintain the DataLake service levels for reliable data flow, health of infrastructure (i.e., compute and storage) and security.

• Improve and maintain the total cost of ownership of data; this activity includes raising efficiencies around FinOps, CloudOps.

• Improve and maintain the architecture transforming data between the DataLake and a distributed search and analytics engine (e.g., ElasticSearch).

• Lead the technical evolution of the DataLake by exploring new methods, techniques, algorithms (e.g., data meshes, AI/MLOps infrastructure).

• Work with the Data Architect to effect best practices to the engineering organization.

• Write and review the necessary technical and functional documentation in documentation repositories (e.g., backstage.io, JIRA, READMEs).

• Work in an agile, cross-functional multinational team, actively supporting the team's success.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Education

- Bachelor's degree in Computer Science or Information Technology with a minimum of 3 years of working experience.

- Master's degree in Computer Science or Data Science, if applicable

- Mid-career switchers are encouraged to apply if you demonstrate relevant working experience of at least 3 years.

Essential Skills/Experience

• Working knowledge of designing and building software applications using Java and/or Kotlin as a main programming language; a bonus is if you have experience designing and deploying RESTful and/or GraphQL APIs

• Familiar with development and deployment technologies for cloud (e.g., Azure Cloud, AWS, GCP), Kubernetes and container workloads (e.g., Kaniko, Docker) in general.

• Proficient in designing and implementing data processing and business Logic

• Demonstrated application of working with Continuous Integration and/or Continuous Delivery models; you are expected to be familiar with using Linux (e.g., shell commands)

• Proficiency in distributed source code management tools like GitLab, Github and practice GitOps

• Effective communication skills in English

Desirable Skills/Experience

• Working knowledge of designing application with a “shift-left” cybersecurity approach.

• Working knowledge of other languages (e.g., Python3, Scala2 or Scala3, Go, TypeScript, C, C++17, Java17)

• Experience in designing ETL or event-driven processing pipelines (with structured or unstructured data) using frameworks like Spark/ Apache Beam, Kafka Streams, Flink; proficient in deploying these data pipelines into Kubernetes cluster in Azure cloud either as virtual machines or containerized workloads.

• Familiar with cloud deployment models (e.g., public, private, community and hybrid) and service models (Software as a Service, Platform as a Service and Infrastructure as a Service).

• Familiar with designing and/or implementing AI/MLOps pipelines in public cloud (e.g., Azure, AWS, GCP)

Essential / Desirable Traits

• Possess learning agility, flexibility and pro-activity

• Comfortable with agile teamwork and user engagement

YOUR CAREER AT THALES

Future opportunities will allow you to discover other domains or sites. You will be able to evolve and grow your competencies in different areas:

• Room and attention to personal development

• Build your talents in another domain of Thales Group, discovering new products, new customers, new country or go to a more complex Solution.

• Choose between a technical expertise or a leadership path

• Build an international career within a leading Engineering Group

Roles & Responsibilities :

• Assists the Project Manager in supervision of all civil and structural works at Project Site.
• Ensure works carried out by subcontractors are in accordance with specifications and drawings.
• Ensure work programme, quality requirement, standards and construction materials requirements are carried out.
• Coordinate all civil & structural works with the consultants, sub-contractors, C&S and M&E coordinators to resolve any technical issues.
• Attend safety meetings and ensure works are carried-out safely on site.
• Any ad-hoc duties instructed.

Requirements:

• Bachelor's Degree in Civil Engineering or equivalent.
• Knowledge in the use of BIM, AutoCad and other relevant softwares.
• Able to read and understand construction drawings.
• Highly motivated, meticulous, independent with good written and verbal communication skills.
• At least 8-10 years of local experience.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Sustainability Engineer (ESG) to be part of our Supply Chain Department diverse team of talent. You will be responsible to support Company’s Environmental, Social and Governance (ESG) projects.

What you will be working on:

Project Management

- Lead and manage ESG projects & initiatives from inception to completion, ensuring alignment with corporate sustainability goals.

- Develop project plans, timelines, and budgets, and coordinate resources effectively.

- Prepare Capex Justification presentation in an accurate and timely manner to facilitate Management Team decision making

- Project lead in a cross functional team to ensure project schedule is executed in a timely manner and meeting project budget

Supply Chain

- Assist and take lead to drive the initiatives especially on Scope 3 Emissions

- Assess and quantify upstream and downstream emissions from the organization’s value chain, including suppliers, products, and waste disposal.

- Collaborate with suppliers and partners to develop and implement emission reduction initiatives, such as sustainable sourcing practices and transportation efficiency improvements.

- Review Supply Chain SOP & OI and ensure they are updated to ESG requirements

Reporting and Compliance

- Support Supply Chain Department on Company’s requirements for reports on sustainability metrics, including greenhouse gas emissions, energy consumption, and waste generation.

- Ensure compliance with regulatory requirements and industry standards related to sustainability and environmental management.

- Handle Compliance, Internal, Exernal and Customer audits to ensure compliance

- Liaison with related government bodies on grant and commercial apects

Continuous Improvement:

- Monitor and evaluate the effectiveness of sustainability initiatives and recommend improvements based on data analysis and industry best practices.

- Stay updated on emerging trends, technologies, and regulations in sustainability and incorporate relevant advancements into project strategies.

More about you:

• Degree in Chemical/Gas, Mechanical, Environmental, health and safety & other engineering.
• Possess knowledge on ESG, IPCC, RCA
• Preferably 4-5 years purchasing experience or engineering experience in a front end semiconductor plant .
• Knowledge and relevant experiences in Conflict Mineral, Green Procurement is a bonus.
• Knowledge in handling audits for Scope 1 emissions is a bonus

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.