This is for a year contract subject to renew.

Responsibilities

· Assure sites are properly stocked with test tools. And test tools are periodically calibrated per AT standards.

· Participate in the Factory Acceptance Testing in the lab and preparation of FAT plan.

· Lead site commissioning activities of radio-based train control systems, including Functional tests and System Acceptance Test (SAT) and System Integration Test (SIT) and ensure that all interfaces to the signalling system are appropriately tested.

· Lead test and commissioning of the On-Board, Wayside, and Radio system system

· Liaise with Engineering / supplier for any design changes and modifications necessary subject to test results

· Record, report, and endorse test results when appropriate.

· Ensuring that testing activities are carried out in timely, logical and cost effective manners.

· Work with Engineering team for the evolution of drawings (ie. mark-up, change order, and transmittals) until the as-build stage.

· Develop productive relationships with client’s teams to ensure successful handover and post-implementation operation of projects.

· Plan and schedule site ITC activities in accordance to the rolling programme, that align with the master programme

· Produce red correction based on the released drawings and correct and rectify failures occurs during T&C phase.

· Raise NCR(None Confirmity) / MNCR (Material None Confirmty) / Fault report during fault found.

· Consolidate / track the following; records, software, hardwares, field changes.

· Implement field change orders

· Prepare installation and test and commissioning procedures / method statement for the communication-based train control system

· Verify the quality of installation works and raise concern if there is a quality issue.

· Troubleshooting, analysis in case of any issues encountered.

· Able to have a good collaboration with the vehicle testers and wayside testers during interface testing.

· Lead / Support the department for the payment milestones related to the test and commissioning

Requirements

·Bachelor’s degree in engineering or related field.

·Minimum 3 years of relevant experience.

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS
• Diagnosing end-user system failures and implement repair solutions.
• Diagnosing printer and other peripheral devise failures and implement repair solutions.
• Troubleshooting network devices in order to ensure connectivity from the PC to the Network.
• Providing installation and upgrading services of hardware and software.
• Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs.
• Setup and troubleshooting audio/video equipment such as projectors and video conference equipment

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 1-1.5 years of relevant working experiences.
• Knowledge of multiple manufacturers and operating systems.
• Excellent troubleshooting capability.
• Using established procedures and working under immediate supervision, performs assigned tasks.
• Work is routine and instructions are usually detailed.
• Resolves routine questions and problems and refers more complex issues to higher levels.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

MedTech Catapult is a national initiative for accelerating the development of high-value MedTech projects through an in-house product engineering unit. This productization unit is responsible for supporting the development of technologies through the medical device development cycle to produce full-fledged hardware product systems. The Lead Engineer will report to the Lead, Product Engineering.

Job Responsibilities:

• To provide electronics and instrumentation design capability in support of the design, development, test and manufacture of safety critical products and processes for complex medical technology product solutions.
• To interact closely with engineers from other disciplines to achieve an optimized design within the stipulated project schedule.
• To design and develop PCB and control systems for next generation medical devices.
• To provide operational electronics development, prototype design and testing - both analogue and digital.
• To conduct PCB schematic capture and layout, including component selection and testing.
• To build and test prototypes and document the design and performance of these.
• To create embedded system design and implementation.
• To conduct EMC testing with in-house equipment and through liaison with EMC test house for electrical safety and medical device compliance.
• To support development of intellectual property portfolio in device design and process technology know-how.
• To provide clearly documented records of technical data, decisions, methodologies, calculations and software use in accordance with ISO/FDA quality standards.
• To support the Procurement and Engineering teams for sourcing and defining specifications.
• To conduct error and tolerance sensitivity analysis, reliability analysis, reliability testing and reliability test program design.
• To support CAD-based electro-mechanical integration, at the component level, board level and assembly level.
• Write and review documentations for QMS.
• Interface with external parties (design houses) to communicate product requirements.
• To support other activities for product engineering when required.

Requirements

• MSc/BSc in Electrical Engineering or Computer Engineering.
• >10 years experience in medical devices (e.g. electronic product design).
• Has a good knowledge and understanding of i) Processes of electronic product development and realization, ii) operation and design of electronic systems and circuits; iii) Regulations applying to medical devices, iv) Electronic device operation and fabrication and v) Electronic sensors, measurement systems and instrumentation.
• Experience with PCB design ? digital and analogue.
• Proficient in HDL languages (Verilog, System Verilog).
• Knowledge of ASIC design and sign-off.
• Familiarity with scripting languages like Python, Perl, or C/C++ is a plus.
• Experience with design, development or manufacture of photonic systems or photonics-enabled products is a plus.
• Experience with the use of simulation tools for electronic design is a plus.
• Experience with Medical device ISO standards including ISO9001, IS013485, ISO 14971 and IEC 60601-1 and managing QMS.
• Good collaboration skills, organised and detailed.
• Demonstrate strong interpersonal skills and leadership skill.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

A world empowered by autonomy. We build robotic vehicles to improve logistics safety, forge a greener Earth, and enhance human lives.

We are a closely-knit team aspiring to change the world through disruptive technology. We are innovators. We are tinkerers. We are problem-solvers. And we have a fair amount of magic dust up our sleeves. We have a plan for fleet-level deployment of autonomous vehicles, and we are looking for the best-of-the-best to join us in making this a reality.

About Venti Technologies

Based in the U.S. and Asia, Venti Technologies is the leader in safe-speed autonomous logistics systems, developing the future of goods transportation. Using rigorous mathematics, deep learning, and theoretically-grounded algorithms, Venti has a proprietary collection of autonomy technologies including a suite of powerful logistics algorithms. Venti’s proven value proposition of saving costs, increasing vehicle utilization, and improving safety is recognized by customers and driving growth. Launched in 2018, Venti brings together an unsurpassed team internationally. The company has autonomous systems deployed in Asia for industrial and logistics sites and a growing pipeline. Venti has offices in Cambridge (Massachusetts, USA), Suzhou (China), and Singapore – our Asian headquarters.

Role responsibilities

• Be part of the team to architect and bring up the new service infrastructure for autonomous prime mover (APM) business.
• Architect and develop large scale IoT system to track live operation data for fleet management to support live fleet operations and monitorings, Provide best data model and services for global route optimization, live monitoring, live map update, vehicle configuration, vehicle maintenance.
• Architect and develop other internal serivces to facilating R& D process.
• Bring up universal auth integration and best security practice.
• Provide common client SDK for backend services.

Required experience

• Bachelor’s or master's degree in computer science or related relevant field.
• 5+ years' experience in backend implementation and .
• Experience with RESTful API framework in Python, Java, or Golang.
• Experience with high performance backend implementation, profiling, and monitoring.
• Experience with data modeling with relational database and NoSQL database.
• Experience with docker, K8s or other containerization techniques.
• Experienced with cloud services.
• Experience with proper CI/CD setup.
• Excellent communication skills.

Salary is commensurate with experience. We also offer world-class benefits, fantastic culture, flexible working arrangements, and a great international working environment. Come and join us!

Job Description:

• Facilitate execution of project plans and utilise appropriate methods and tools to track and drive progress of projects against set plans and timelines
• Collaborate and communicate effectively with relevant internal and external stakeholders related to the projects
• Track both internal and external quality project deliverables against project schedules
• Perform dimensional and geometrical measurements and inspection of manufactured components for evaluation of acceptability
• Approve parts for next process & data analysis.
• Review inspection result or data in accordance with inspection and test plans.
• Collate information for product and process quality metric management reports and provide summary statement to customers.
• Assist with various stakeholder to classify issues by implementing corrective and preventive actions (CAPA) plans
• Manage Internal and External CAR analysis
• Manage Sub-con NC parts investigation
• Identify opportunities and propose improvement on QMS related process & procedures within own work area and assist with the implementation of workflow improvements to improve efficiency
• Identify, diagnose and resolve process related issues by applying failure analysis, FMEA, 8D or SPC methodology
• Update and present QA monthly performance reports to internal stakeholder.

Requirements:

• Possess at least ITE/Diploma in Engineering (Mechanical), Engineering (Precision Engineering) or equivalent.
• Familiar with manufacturing process, precision engineering and quality assurance environment.
• High mix low volume work environment
• Independent and task prioritization
• Knowledge on Microsoft office software.
• Basic knowledge on ISO 9001.
• Knowledge on mechanical drawing, GD&T.
• Knowledge in CAPA / 8D / Root cause analysis
• Able to use basic measuring instruments like caliper, micrometer & profile projector.
• Able to do OGP smart scope program independently.
• Good email communication skills.

Job Description:

• To lead, coordinate and work with cross functional teams such as tools suppliers, equipment engineers, process engineers, facility engineers, environment health and safety officer, contractors for tool placement plan.
• To participate in the evaluation, planning and supervision of projects including testing and commissioning.
• To provide support for new chemical and gas evaluations. Plan and execute specialty gas system release/unhooking up.
• To carry out overall cleanroom capacity modelling and planning, work with manufacturing, process and equipment engineering to ensure requirement is met.
• To review capacity model, understanding the constraints and re-lay the equipment layout in the cleanroom to maximise the cleanroom space usage.
• Management of contractor?s services to ensure fulfilment of contracts terms and agreements.
• Identify opportunities for innovation that are relevant and appropriate to the company business objectives
• To review capital and cashflow requirements, driving activities to improve capital efficiency and reduce cost.

Requirements:

• Degree, Diploma in Engineering (Chemical, Mechanical, Electrical/Electronic, Building Management) or equivalent.
• Degree with 3 years and Diploma with 5 years related experience in
• Manufacturing of Semiconductor, Wafer Fab.
• Able to work in fast-paced environment, proactive and able to work independently with minimum supervision, self-driven and self-motivate to get job done.
• Able to work in a manufacturing, production, cleanroom environment.
• Technical knowledge in Facilities Support System such as ACMV, HVAC, Scrubber, Electrical, Compressed Dry Air, Nitrogen, Hydrogen, Process Cooling Water, Ultra-Pure Warter, Chilled Water, Wastewater Treatment etc.
• Possess Project Management skills.
• Strong understanding of building codes, HSE laws, regulations and best practices and the ability to interpret/translate these into compliance activities
• Proficient in utilizing Excel, Power Point, Project, Word & Visio, AutoCAD.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

We are looking for Project Engineer to join our fast and growing team. You will be working with stakeholders on the following:

Job Description

• Execute and manage the project and responsible for the quality of work produced by the team and sub-contractor(s).

1. Projects
2. Documentation
3. Acceptance

• Co-ordinate, plan, conduct and manage the various activities within the project team, with the subcontractor(s), customers and document the progress of the project.

1. Project Schedule & Planning
2. Team Management
3. Risk Management
4. Prepare and Conduct PMR, PDR & CDR
5. Project Meeting
6. Knowledge sharing and conduct training
7. Prepare Operator and Maintenance Manual
8. Prepare and Conduct Installation, Checkout, Inspection and Testing
9. Conduct Factory Acceptance Test and On-Site Acceptance Test

Requirements:

• Degree with at least 3 years or Diploma with at least 5 years in Engineering related field
• Strong organisation skills and meticulous
• Team player with good communication and interpersonal skills
• System knowledge such as RFDF, EOIR & Radar will be added advantage
• Able to travel within a short notice is a plus
• Candidates with strong background will be considered for role of "Project Manager"

Interested applicant can click on 'Apply' or send updated CV to [email protected]. We regret to inform that only short-listed applicants will be notified.

Job Description

• Prepare project schedule in either MS Project or Oracle Primavera P6.
• Cost loading to the baseline programme
• Monitoring Critical path and Earn Value Management (EVM) analysis
• Prepare impact analysis for EOT claims
• Prepare working programme and float analysis
• Document control for relevant EOT event
• Monthly progress report and resource monitoring
• Handle on the change control

Requirements

• Degree/Diploma in Civil Engineering/Mechanical Engineering or any other engineering field with minimum 3 years of experience in project planning roles.
• Possession with CAPM or PMP certification will be an added advantage.
• Good analytical, communication and problem-solving skills
• Team player
• Strong analytical, critical, and logical thinking skills.
• Able to work independently with minimal supervision.

Roles & Responsibilities

Job description:

• Responsible for day to day Operations and administration on network & security infrastructure
• Responsible for firewall security appliances, routers and switches particularly trouble shooting and/or debugging network related problems.
• Perform support, configuration and maintenance of network equipment and network operating System
• Perform basic Linux administration and able to configure, manage network application.
• Handle network projects and identify any missing components in the infrastructure and support future demands on the network infrastructure.
• Good Knowledge troubleshooting, problem identification, problem resolution and/or resolution recommendation activities
• Must have experience in managing of Checkpoint firewall, Extreme, HPE, Cisco, Aruba Switches.
• Work with vendors to deliver the project scope and meeting project deadlines
• Proactively monitor network performance, ensuring high network availability and smooth operations
• Involve in Network and IT audit and adhere to security compliance and governance.
• Perform evaluation, proof of concept and provide recommendations.

Job Requirements:

• A Bachelor’s degree in Computer Science, Computer Engineering, IT or equivalent.
• Must be CCNA certified, CCNP preferred.
• Working knowledge plus at least a year’s experience in networking technologies like Structured Cabling, WAN, LAN, VPN, Network Security, Wireless, iBGP, eBGP, Routing Protocol, OSFP etc.
• Hands on experience in implementing, administering and troubleshooting network infrastructure devices, including cisco, Brocade routers, Dell enterprise and cisco switches, network firewall, IPS, SIEM, vulnerability assessment and monitoring tools.
• Experience in IPv6 and Data Centre operations an advantage.
• Familiarity with Linux (as a user and system), container technology, security concepts, project management and ITIL processes will be added bonuses.
• Familiar with Dense wavelength division multiplexing DWDM) is a plus.
• Familiar with basic Linux administration is a plus.

Sulzer is a leading engineering company with a proud heritage of innovation. Join our global team to grow your expertise and develop innovative solutions that enable a prosperous and more sustainable society.

Purpose of the Job

Sulzer Chemtech’s expanding licensing portfolio is delivering exciting new low-carbon solutions to customers as they navigate the ever-changing world of sustainability. Our client base faces challenges from multiple fronts and are turning more and more to technology-providers for a roadmap that will lead them to a successful future. This requires us to be more creative and more responsive than ever before as we work as a global team to propose and sell our product, technology, and service portfolios. We are looking for a Senior Technical Sales Engineer that understands customer needs in providing technical support and crafts winning proposals in support of sales strategies with the help of team members and technology experts.

Your main tasks and responsibilities:

• Will be part of Global Technical Sales team led by Technical Sales Director
• Responsible for generating proposals independently most of the time working with guidance from Technical Sales Director
• Study customer’s specifications: review, interpret, understand, and identify bid requirements.
• Prepare complete deliverables for the full technical proposal producing simulations, material balance and utility requirements, Process Flow Diagrams, equipment sizing and design, Capital Cost Estimation
• Attend customer proposal review meetings as needed, presenting the technical details as required.
• Support commercial sales team based in China with technical inputs for customer sales visits and travel with them as and when needed.
• Develop opportunities with a focus on increasing market share and identifying new opportunities for Sulzer;
• Correct usage and timely update of CRM tool
• Drive the company’s risk management process for quoted opportunities
• Deliver Order intake results to meet annual targets.

To succeed in this role, you will need:

• Bachelor Degree in Chemical Engineering / Business or Equivalent.
• 5 to 8 years of experience in refinery, petrochemical, and downstream industry with basic understanding of process configuration
• Proficient with process simulation and design software’s like PROII, HYSYS, Aspen Plus etc.
• The ideal candidate has relevant sales experience in licensing and is passionate about technology, customer relationships, and results.

Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment.

We are proud to be recognized as a Top Employer 2024 in Brazil, China, Germany, Switzerland, the United Kingdom and the United States.

Responsibilities

• Lead a team of line leaders and operators to meet daily production output, quality, productivity and yield.

• Conduct daily pass-down meetings and escalate line issues if any

• Oversee manpower/overtime and consumables planning

• Ensure manufacturing and safety procedures are being followed

• Conduct training/coaching to leaders & operators to improve performance

• Implement ideas and improvement activities to prevent human errors

• Ensure good discipline and housekeeping in the line

• Coordinate with other departments to support projects, evaluations and preventive maintenance activities in the fab

Requirements

• Diploma/Degree in Engineering/Science/Production/IT

• Preferably experienced in high-tech, high-vol manufacturing environment

• Good leadership and communication skills

• Willing to work 12-hour shifts (day or night)

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable.

Join our team within Chemtech division in Sulzer Singapore Ltd as Senior Applications and Sales Engineer to help us take our business to the next level.

In this role you will be accountable for:

• Prepare technical proposals and commercial tenders project
• Interface with customers and monitor progress of projects
• Co-ordinate projects with head office, regional offices and agents
• Prepare and co-ordinate all proposal activities with Regional Offices and Local Headquarters
• Carry out tender reviews and order reviews
• Handle technical clarification for all proposals. Work as an integral part (with technology, engineering, production) in developing proposals, pricing strategies and customer presentations
• Prepare price calculation and tender documentation
• Ensure that the specifications offered to the customer are within the capability and capacity of the company
• Ensure that the customers’ requirements are adequately conveyed and reflected in engineering, manufacturing and installation
• Follow-up projects monthly and update MIS daily
• Undertake sales and marketing of Sulzer Chemtech products and services throughout Asia Pacific region
• Control all correspondences and documentation relating to project. Co- ordinate and utilize inter-department resources where necessary.
• Ensure that all technical and commercial specifications are received, clarified and agreed with customer at order stage.
• Prepare complete project and engineering files
• Arrange project handover meeting with Project Management and Engineering for larger projects and non-standard
• Initiate Customer Complaint Reports to ensure that with complaints are properly and efficiently dealt with
• Feedback information to customers on quality improvements on product and changes, as and when necessary
• Supervise/Check the work of junior Applications & Sales Engineer if required.

To succeed in this role, you will need:

• Degree in Chemical Engineering
• 5 ~ 10 years of sales and customer services experience preferably in Chemical & Petrochemical / Oil & Gas industry.
• ProII / Aspen Simulation Program is optional, but not mandatory
• Microsoft Skills
• Distillation theory
• Fair knowledge of chemical separation processes knowledge Business travel (~30%), particularly in the Asia Pacific region.

Sulzer is an equal opportunity employer, committed to the strength of a diverse workforce.

83% of our employees recommend Sulzer as a good place to work and we are proud to be recognized as a Top Employer 2023 in Brazil, China, Switzerland, United Kingdom and United States. So come and join our story, starting today!

About the Role:

To maintain the service education system for trainers and distributors. This includes training on repair processes, installation, maintenance, and troubleshooting, as well as introducing new products by preparing training schedules and materials. The role also involves promptly tracking technical inquiries and providing remote support to other Business Centres and distributors, ensuring that all administrative documentation is accurate and complete to enhance efficiency and service quality. Additionally, it includes planning and reviewing the Quality Management System to improve repair quality in the repair centre.

Roles and responsibilities:

• ·Conduct in-service training on medical devices and related products for trainers in other Business Centres and distributors, including:

o Repair processes (assembly and disassembly)

o Installation and maintenance processes

o Troubleshooting

• Prepare service training and manage the introduction of new product repairs, including training materials and schedules.
• Establish a service education system for medical devices and related products for engineers in other Business Centres.
• Address technical inquiries and provide technical support (installation, maintenance, etc.) to Business Centres and distributors, both remotely and on-site (e.g., at hospitals).
• Ensure proper documentation, notification, tracking, and follow-up on all technical inquiries.
• Support Business Centres and distributors with all service and technical-related inquiries and activities.
• Escalate issues to higher-level support when necessary and act as a contact point between Business Centres and headquarters.
• Plan and review the Quality Management Systems of repair centers to secure and enhance repair quality.
• Perform any other tasks as assigned.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• Hybrid home office work arrangements
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Diploma or Degree in any Electrical/Electronics/Mechanical Engineering Discipline
• At least 3 years of related experience in the medical device industry is highly preferred.
• Experience in technical support, including technical training.
• Experience with lean manufacturing and Six Sigma is preferred
• Strong hand-on skills and good eyesight.
• Willingness to travel to the Asia Pacific region if required.
• Proficient in the use of MS Office and its applications.
• Possess strong communication and troubleshooting skills.
• Able to work in a team environment and collaborate with staff across different age groups.
• A team player with enthusiasm for learning and the ability to work with minimal supervision.
• Strong troubleshooting and analytical skills.

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

A site engineer is responsible for the planning, design, and construction of civil engineering projects, such as roads, dams, bridges, and buildings. They are responsible for many aspects of a construction project, including:

• DesignSite engineers evaluate the soil conditions, topography, drainage, and environmental considerations to ensure the design is implemented successfully. They also draft blueprints.
• ConstructionSite engineers manage the construction teams, subcontractors, and equipment on the site. They also ensure that the construction adheres to safety regulations and project timelines.
• Quality assuranceSite engineers perform quality assurance tests to ensure that the materials and workmanship meet the required standards.
• Technical adviceSite engineers provide technical advice during construction work and identify and resolve technical issues.
• CollaborationSite engineers collaborate with clients, construction crews, architects, designers, and other stakeholders.

Epsilon operates a global IP/MPLS network as well as supporting transmission networks. We are seeking a candidate with strong IP/MPLS skills and experience. The candidate would be responsible for ongoing network optimization and technological development for our global IP/MPLS network which support layer2 and layer3 VPN services. The candidate should also express a willingness to participate in projects related to transmission network upgrades and planning exercises.

Responsibilities

• Responsible for the deployment and management of the global MPLS and VPLS (E-Line, E-LAN and IP-VPN) infrastructure.
• Work with solutions design, and technical sales teams to develop complex service solutions for bespoke customer applications.
• Responsible for the deployment and management of the global IP transit, IP peering, and the connection to IXP and CSP.
• Work cross-functionally with product team and project management to generate implementation plans including Method of Procedure (MOP), Bill of Materials (BOM) and Scope of Works (SOW)
• Participate in optical transmission network upgrades and migrations as needed.
• To take up the on-call rotation and out of hours work when required
• Maintain technical and training documentation and develop automation as needed.
• Provide guidance and training to NOC when required

Requirement

• 5+ years of working experience in telecom provider, ISP, CSP or content provider.
• Experience working within a multi-vendor network environment – Juniper, Alcatel-Lucent/Nokia and Cisco are relevant.
• Experience working with network automation tools (Ansible, Python, Jinja, Git) a plus
• Extensive knowledge and experience in Layer 2 switching and Layer 3 routing technologies and protocols including TCP/IP ,OSPF, BGP/MP-BGP, IS-IS, MPLS and RSVP etc.
• Experience working and knowledge in security and firewall.
• Experience working and knowledge in SD-WAN/SASE is a plus
• Knowledge or prior working experience with optical networks is a plus, but willingness to learn and understand the design and operational aspects of transmission technologies is required.
• Demonstrated ability to meet deadlines among multiple concurrent projects
• An enthusiastic and helpful attitude
• Willing to learn new technologies
• Must enjoy working in a fast-paced environment where a strong ability to multi-task is necessary
• Must be highly detail-oriented

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our IE&CE Advanced Mechatronics Department diverse team of talent.

What you will be working on:

• Fault identification, repair and refurbish on component of any of the categories: Turbo pump, Cryo pump, LPT, Indexer, Robot, RPS, Valve, Chiller, Heat Exchanger, Smith Loaders, Electronics/PCBs/Controller, RF Gen, RF Match, LPS, Power Supply
• Conduct acceptance tests on repaired part such that its functionality is repeatable and reproducible to ensure good quality
• Ensure proper knowledge transfer is conducted and supervise Industrial Attachment (IA) students
• Provide support to module Equipment Engineers and perform repairs for semiconductor production equipment and parts in cleanroom environment, on ad-hoc basis
• Adhere to SOP when performing repairs to ensure best quality and to strive to achieve 95% repair success rate
• Perform inventory control on consumables and spare parts used in repair workshop
• Source and liaise with vendors for quotations of required parts and follow up on delivery timeline
• Ensure workplace safety is practiced at all times

More about you:

• Degree/ Diploma (Microelectronics, Mechatronics, Electrical, Mechanical)
• Minimum 3 years of relevant experience in semiconductor field
• Fresh graduates are welcome to apply
• Expertise in either soldering, pumps, valves or strong knowledge in Microelectronics
• Able to perform circuit board repair and component level troubleshooting skills
• Resourceful and has initiative
• Working experience in front end semiconductor industry would be advantageous

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Quality & Product Engineering diverse team of talent. You will be responsible for Quality control for Facilities and Fab use - UPW, Chemicals, wafers, Fab Environment and Incoming quality check of materials.

What you will be working on:

• Liaise and support fab engineering modules on requirements for ad-hoc requests
• Communicate to end user and follow up for OOC/OOS issues
• Manage, maintain and verify functionality of equipment and perform troubleshoot where required
• Responsible and accountable for work quality and integrity in all assigned tasks
• Participate in continuous improvement programs/ initiate action for continuous improvement in work processes, safety and quality standards
• To monitor and improve the performance of analytical tools and methods for analysis
• Responsible for safety and housekeeping of Lab work areas and environment
• Update in meetings for Pre alert/ Out of control/ shutdown cases
• Update and maintain documents for Lab operation and analytical tools
• Update and reporting of lab operation and issues
• In charge of arrangement for Lab manpower
• Internal audit of lab

More About You:

• Degree in Chemistry/ Material Science or equivalent
• 1- 3 year experience in semiconductor, manufacturing, Chemical Lab or/ and quality related experience preferred
• Basic to intermediate knowledge of analytical techniques
• Knowledge of Microsoft Excel, Win Word, Powerpoint, Tableau and Excel VBA
• Knowledge of requirements IATF16949, ISO17025, ISO 14000, OSHA 18000 will be an added advantage

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Quality & Reliability Engineering diverse team of talent. You will be responsible for end-to-end notification and communication process on product and process changes.

What you will be working on:

• Responsible in managing the end-to-end notification and communication process on product and process changes.
• Responsible in ensuring that changes are effectively communicated to customers through working with various stakeholders including the account facing teams & process owners.
• Be the Facilitator of engineering change requirements to ensure that both internal and customer requirements must be met.
• Manage the ECN scorecards with respect to implementation and closure with the relevant stakeholders.
• Tracking implementation progress and reporting back to management.
• Be the Facilitator for customer concessions and work with internal stakeholders/customers until concession closure.
• Participates in inter-departmental cross-functional projects.
• Analyzing common problems / root causes with possible suggestions for further improvements.

More About You:

• Degree in Chemical Engineering / Chemistry / Materials Science / Physics / Electrical & Electronic Engineering or equivalent.
• Minimum 3 years of relevant experience in semiconductor or automotive industry.
• Preferably with experience in SPC tool.
• Preferably with experience in Change Management & Concession Management

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Live studio direct News & Current Affairs programmes in both automated and traditional galleries. Content is not limited to broadcast content. May be required to support digital from time to time.
• This position is responsible for the execution of live studio programming using a Vizrt Mosart Automation system. The responsibilities include but are not limited to using studio equipment to build effects and templates for coding and execution of studio shows via Octopus rundowns.
• Co-ordinate the planning and production of News and Current Affairs programmes output to ensure that editorial intentions are met, and highest production standards maintained. The individual will be equipped with the right skills and new/developing tools to deliver high quality production.
• Set the direction and work with studio crew on duties on the requirements to facilitate and execute an error-free studio production.
• Work primarily in the studio but occasionally will be needed in the field for outdoor news broadcast.
• In the fast paced nature of news, the individual is required to provide guidance to the studio and production crew on the last minute changes and issues that may happen on during production.
• Enforce the compliance to the Error Tracking System from both the production and maintenance team.

• Minimum Diploma in relevant discipline
• At least 2 years in production, preferably studio/live production but other production acceptable as well.
• Must be able to work in a high-pressure environment and able to react to changes and situations in a calm and collected manner, without supervison.
• Multitasking is required in the role as well as strong people interpersonal skills.
• Proficient in planning, organising and communicating to be able to manage multiple issues that may occur during production as well as the stakeholders from various teams. Required to have an eye for detail and ability to make decisions under pressure.
• Experience with studio production with a strong understanding of studio equipment, including switchers and audio board will be an added advantage.
• Proficiency in the English language and at least one other language (Chinese Tamil or Malay) would be an added advantage to understand the language of the programmes.
• A good team player and must be willing to work nights, on irregular shift including weekends and public holidays.

Responsible to guide and lead the manufacturing of cosmetic and health supplement products complying to Good Manufacturing Procedure. Basic chemistry understanding will be very helpful and any laborartory experience will be a plus.

Responsibilities:
• Prepare of the material and packaging material for the daily production.
• Support production including labelling of the bottles, filling, carry and moving of products.
• Maintain cleanliness of workplace and ensure machines are in good condition.
• Documentation and maintain the data of pre-weight till handover the goods to the warehouse.
• Support internal audit & external audit for ISO
• Sourcing & liaising with suppliers on the quotation and stock availability.
• Assist in coaching and guidance to the new employees.
• Raising orders of the raw material, plan the production schedule based on the inventory stock level.
• Ensure all the production operators, manufacturing process is accordance to SOP.
• Ensure the production is running smoothly.
• Learn and understand the production operation flow to complete the daily output.
• Create, update and maintain SAP system.

Requirements:
• Diploma in Chemical/Chemistry/Engineering/Pharmaceutical Sciences
• At least 2 years manufacturing work experience is preferred
• Excellent communication to provide training and coaching to team member
• Knowledge in ISO 22716, ISO 22000 and ISO 13485 knowledge will be advantageous

• Position: Junior Sales Executive/Engineer (FULL TRAINING PROVIDED/NO EXPERIENCE WELCOME)
• Location: Toh Guan
• Working Hours: Monday to Friday (7am - 4pm), Alternate Saturday (7am - 12.30pm)
• Salary (commensurate with experience): Up to $3,500 + Performance Bonus
• Duration: Permanent
• Industry: Fire protection system supplier

Main Responsibilities:

• Source for new clients
• Promote the company’s products/services addressing
• Following up on leads to make advisor/client appointments
• Build long-term relationships with new and existing customers
• Any other ad-hoc duties assigned

Requirements:

• Minimum 'N' Level
• Full training is provided for inexperienced candidates

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• Position: Sales Engineer
• Location: Ubi
• Working Hours: Monday to Friday (office hours)
• Salary (commensurate with experience): Up to $5,000 Basic Salary + ATTRACTIVE Commission + Transport Allowance + Performance Bonus
• Duration: Permanent
• Industry: Machinery

Main Responsibilities:

• Manage existing customers and develop new customers and foster good customer relationship for revenue growth and customer retention
• Provide pre-sales assistance and after-sales support to customers
• Prepare quotations and follow up on sales enquiries/proposal from customers
• Prepare sales visits, maintain customers contact database and update project status/activity reports on weekly basis
• Support marketing activities in seminars, trade shows, conferences, and other marketing events
• Deliver presentations and hands-on demonstrations of products, applications, and technology for the purpose of product sales
• Able to analyse competition market/data
• Any other ad-hoc duties assigned

Requirements:

• Bilingual in English and Mandarin to liaise with Mandarin speaking associates in view of business communications
• At least Diploma in Electrical Engineering/Mechanical Engineering or Mechatronics
• Minimum 2 years of working experience in industrial electrical/mechanical component sales
• Prior experience with automation & motion control
• Proficient with Windows based applications (Word, Excel, PowerPoint)
• Full product training is provided

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Profile Summary:

The Senior Systems Engineer supports security systems and operations administration, monitoring and maintenance. Monitors security alerts and events. Collects and documents contextual information based on established practices and supports the preparation and publishing of security advisories. Assists with the analysis of security-related information and events, escalation of incidents for validation and remediation.

Able to be alert and vigilant in performing monitoring activities, and is able to analyze and resolve security-related issues critically. He/She communicates clearly in his/her interactions with others and coordinates effectively with his/her team to perform security operations.

Roles & Responsibilities:

Monitor security systems

• Perform non-routine security monitoring activities

• Perform prioritization and allocation of security incidents

• Track security monitoring rules and alerts

• Compile regular reports on the performance of security operations

Maintain security operations

• Assist with the implementation of agreed security system changes and maintenance routines

• Assist with implementation of new security programs

• Support vulnerability, penetration testing and assessments

• Support the development of reports on security penetration testing results

• Recommend security products, services and/or procedures

• Support the alignment of security systems with established service agreement standards

• Support the implementation of new enterprise security architecture, technologies and enhancements

Respond to queries

• Support live response to security issues

• Support investigation of security breaches such as forensic threat investigation

• Support the resolution of security related issues

• Support the simulation of user problems to identify security system drawbacks

• Recommend security system modifications to reduce user problems

Facilitate compliance

• Assist with the implementation security policies, procedures and programs

• Educate users on the security standards and practices

• Identify improvement areas to existing security policies and procedures

• Deliver user training

Optimize security system performance

• Support piloting of new tools, technologies, and processes as well as installation of hardware and software

• Support security system testing and ongoing optimization or changes such as scheduled upgrades and updates

• Maintain documentation of all optimization activities

• Suggest improvements to operational processes, procedure manuals, and documentation

Requirements/ Qualifications:

• Minimum Bachelor in Computer Science or equivalent
• 2-3 years of relevant experience
• Experience in firewall, network scanning or asoc
• Possessed Risk assessment experience
• Required to be on standby with on-call availability with varied shifts including nights, weekends and holidays.
• Experience in AD/ID administration as per best security practices
• Exposure in IM8 or equivalent

Responsibilities

• Manage IT infrastructure (including SDWAN and cybersecurity solutions), servers (including VM) and backup solutions (on-premises and cloud)
• Manage various IT assets including user PC, Retail POS and peripherals, printers (including barcode printers), electronic shelf labels, digital signage, mobile phones and tablets etc.
• Manage various SAAS solutions including Microsoft 365
• Problem solving, troubleshooting & user support
• Project management of IT initiatives
• Liaising with various external vendor solution providers
• User training, UAT, user/system documentation and change management.
• Assist in developing and implementing IT policies, protocols, procedures, solutions, and best practices including incident reporting on containment and remediation.
• Be part of project management team on IT initiatives (including system updates and migrations) starting from managing timelines, requirements gathering, specifications, sourcing of solutions, evaluation of solutions, managing implementation process including UAT, user training and system documentation.
• Assist to conduct regular system audits, regular checks on network and data security and testing to detect issues within the IT systems.
• Identify opportunities to improve and update software and systems for higher productivity.

Prerequisites

• Minimum 3 years work experience in IT support, systems administration, or network management, experience in setting up or maintaining basic infrastructure (networking, server setups) is a plus.
• Diploma in Computer Science, Information Technology, Network Engineering, or related field.
• Familiar with configuring and maintaining servers, workstations, and network devices.
• Good analytical, logical and problem-solving skills.
• Team player and able to independently and self-motivated.
• Able to communicate clearly with both technical teams and non-technical staff.

Role Summary

We are seeking a CIM System Engineer to support the development and deployment of CIM (Computer Integrated Manufacturing) system solutions for 12" fab operations. The role will involve creating automation solutions, establishing key procedures, and enhancing operational efficiency through advanced automation.

Key Responsibilities

• Develop CIM system solutions to automate processes in 12" fab operations.
• Integrate and implement automated system solutions to optimize manufacturing efficiency.
• Establish procedures for the operation and development of fully automated systems, ensuring smooth deployment.
• Implement and optimize automation systems to enhance productivity and reduce operational costs.
• Introduce predictive maintenance and monitoring systems to ensure continuous operation and minimize downtime.

Qualifications

• Bachelor’s or higher degree in Computer Science, Electrical, Mechanical, or Industrial Engineering.
• Experience with CIM, MES, FactoryWork300, C++, C#, Java, ASP.Net, .Net, or other automation technologies.
• Excellent interpersonal, written, and verbal communication skills.
• Ability to effectively multitask and solve complex problems efficiently.
• Enthusiastic, with a strong collaborative team-player mindset.