Duties & Responsibilities

• Prepare, interpret and evaluate stress/vibration result.
• Review piping layout and piping information.
• Review piping engineering progress against approved schedule.
• Evaluating changes and taking corrective action when required.
• Provide technical guidance, executing and coordinating the above responsibilities to ensure timely completion and meets project schedule and budget.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements

• Bachelor’s degree in Mechanical Engineering.
• Minimum 10 years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support.
• Good knowledge of Caesar II.
• Interpretation of stress/ vibration analysis report.
• Basic knowledge of AutoCAD.
• Basic knowledge of 3D model review through Naviswork or SPR.
• Strong analytical and reasoning abilities.
• Good interpersonal and communication skills.

Roles and Responsibility:

• Preparation of Piping Material Specification (line classes), specifications/requisitions for bulk and special piping components, vendor quotation evaluations and verifications of vendor documents and piping material take-off prepared by engineers for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To calculate/validate pipe wall thickness, branch reinforcement etc.
• To prepare line index, Material summary (BM/BQ).
• To carry out engineering support work during the construction phase of the project.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements:

• Minimum of Ten (10) years in the field of piping engineering involving material, design, production work, 3D model review, stress and construction engineering support.
• Bachelor’s Degree in Mechanical Engineering or equivalent combination of education and experience.
• Good knowledge and experience of ASME, ASTM, BS and other relevant standards.
• Basic knowledge of AutoCAD/AP3D/S3D.
• Basic knowledge of 3D Model review through Navisworks or SPR.
• Strong analytical and reasoning abilities.
• Good leadership skills.
• Good interpersonal and communication skill.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to perform modelling and real-time simulation of electric vessel’s onboard microgrid and propulsion system.

Key Responsibilities

• Participate in and manage the research project with Principal Investigator (PI), Co-PI and the research team members to develop onboard microgrid simulation models with energy management systems as well as to plan and test the relevant hardware systems.
• Work with research team to deliver the work scope and undertake these responsibilities in the project.
  Work Responsibilities:
  1. Develop detailed electrical models of the microgrid (power system) of various e-vessels based on the concept design in a simulation environment such as Matlab/Simulink.
  2. Design and develop an intelligent energy management system for the e-vessel microgrid for coordinated control of multiple energy sources considering cost, carbon, and operation constraints.
  3. Operate the simulated electrical model with EMS controller to perform simulations for various cases to demonstrate performance and recommend improvements at unit, sub-system and whole system level.
  4. Implement and carry out simulation studies for onboard microgrid and connection to shore charging infrastructure.
• Recommend efficient and reliable power system architecture(s) with other merits of high-density and light-weight.
• Test the relevant power electronics and drives system hardware and troubleshoot the challenging problems.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment and assist in laboratory management.
• Mentor students involved in the research project
• For those hired at senior levels, management responsibilities may be included

Job Requirements

• Have a Master’s or PhD’s degree in Electrical Engineering or equivalent from a recognized University. Major in Power Engineering will be advantageous.
• Minimum 3 years of relevant experience in modelling and energy management algorithm development using MATLAB/Simulink for microgrid applications.
• Knowledge of power electronics, drives, and control is highly preferred. Hardware testing experience will be advantageous.
• Have experience and commitment to participate in project meetings.
• Self-motivated team player and good project management skills.
• Excellent writing, communication, presentation, and interpersonal skills.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.
• We are looking for people who
• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

About the role

Works closely with and have impact on: Global Research & Development (R&D), Post Market Surveillance, and Global Regulatory Affairs (RA) Teams

Reports to: Senior Manager QA R&D

Function: Global QA & Compliance Organization

Work Location/Site: Singapore / Global Headquarters

Role Overview

This position is responsible to ensure that products meet quality goals and regulatory requirements, including but not limited to FDA Regulations, ISO 13485, EU MDR requirements, and Risk Management per ISO 14971 and maintain compliance of the Quality Management System (QMS).

Duties and Responsibilities

• Partner with R&D teams in the USA, Japan, and Singapore to ensure that design control is completed in accordance with procedures, WI, regulatory requirements, and assure that required outputs have been completed
• Execute risk management for devices, processes, and provide the assessment results from product development through to the launch
• Maintain and update risk management files with Global R&D/Manufacturing Engineering (ME) teams to support product development (Risk Management Plans, Risk Control Log, Benefit Risk Assessment Risk Management Report, xFMEA, etc.), and act as the Risk Management expert
• Assist in the review and approval of design development plans, verification and validation protocols, reports, master V&V plans and reports, and design transfer
• Review and approve design verification test protocols, reports and data from a logical point of view (Compliance, rationale, objectiveness and statistics)
• Partner within Quality and R&D to ensure design control documentation (Risk Management, Traceability/Linkages) & design change control requirements are met
• Review and approve biocompatibility protocols and reports
• Ensure compliance of IQ, OQ, tests method validation, Standard Operating procedures and work instructions regarding product development
• Maintain compliance to QMS procedures of the R&D Singapore site, and support the Singapore R&D Site - QA
• Support External audits by competent authorities and notified bodies
• Support internal audits at the local site, and other sites as required
• Review and approve other quality documents (e.g., IQ, OQ, PQ, WI, etc) within areas of responsibility
• Propose and execute quality/process improvements. Write/review policies/ processes/ procedures and related documents
• Manage and monitor the progress of the calibration and maintenance of testing equipment. Ensure calibration or maintenance records satisfy regulatory and QMS requirements (act as Equipment Control Administrator in Singapore)
• Participate in development projects and change control request meetings to support the resolution of engineering issues
• Collaborate with the post-market surveillance team and complaints investigation teams to maintain risk management process throughout a product’s lifecycle
• Provide support for other quality activities and improvement initiatives, quality data collection and trending, CAPAs, change controls, training, etc.
• Support initiatives as identified by management to support QMS and other regulatory requirements in Singapore

Requirements

Experience

• At least 4+ years of Industry experience working as QE Engineer in Medical Device/ Pharmaceutical product or optical engineering business field
• Experience in test method validation
• Experience in Design control, Design Transfer, Design and Development Process
• Demonstrated knowledge of Risk Management (ISO14971), Design control, Design and Development Process and Quality System (any one of ISO13485).
• Understanding and Knowledge of biocompatibility studies
• Experience in coordination and planning of complex activities and ability to identify and resolve complex problems through effective use of technical and interpersonal skills
• Product development experience (e.g. approaches for definition of requirements and specification setting for verification and validation). Practical experience in design control and risk management
• Effective use of oral and written communication skills to clearly communicate the quality position, and the actions necessary to resolve issues
• Interpersonal, team, leadership, and negotiation skills to handle conflicting priorities
• Strong oral and written communication skills, excellent interpersonal and cross-cultural skills required
• Capable of clearly presenting and justifying quality requirements to management
• Accreditation by a professional body is highly desirable. Examples include American Society for Quality (ASQ) Certified Quality Auditor (CQA) or Certified Quality Engineer (CQE)

Skills/Accreditations

• Smooth communication ability
• Business software skills (e.g. Word, Excel and Power point)
• Experience with statistical software such as Minitab
• Voluntary working attitude with a creative idea
• Passionate working attitude to pursue a goal with patience.
• Flexibility for changes

Academic Qualifications

• A bachelor’s degree or higher in Chemical, Bioengineering, Mechanical, Optical Engineering or related fields.

Travel requirements

• 2-3 international travel annually mainly Thailand.

By submitting your application, you consent to HOYA Group collecting, disclosing, and retaining your personal data for employment assessment and verification purposes.

If you are shortlisted, we will contact you within three weeks of your application. Thank you for your application and understanding.

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. Check out the link above for more information, and send your CV to [email protected]

• Position : ALL WELCOME - Technical Sales Engineer (NO EXP REQUIRED/TRAINING PROVIDED) - Up to $4500
• Location : West – Bukit Batok Crescent
• Working hours: Monday to Friday | 8.30am to 5.30pm
• Salary (commensurate with experience) : Up to Basic of $4,500 + Average Incentives of $1,000 + AWS + Variable Bonus + Transport Reimbursement/Allowance + Mobile Phone Allowance + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Industrial Automation

Main Responsibilities:

• Responsible for preparing quotations, proposal according to customer’s requirements
• Plan sales visits, customer calls
• Service existing clients and proactively identify and develop new customers and markets
• Conduct product training and presentation to customers
• Follow up on sales lead, sales orders and deliveries
• Provide application/product support to customers and internal sales team
• Provide post sale and presale application and sales support by analysing and recommending solutions to meet customer’s needs.
• Using technical skills to demonstrate to potential customers the usefulness of the product and how it may suit the customer better than competing products..

Requirements:

• Diploma/ Degree in Electronics / Electrical / Engineering/ Industrial/ Mechatronic/Mechanical
• No experience required/ Entry level candidates are welcome to apply
• Training on products will be provided
• Bilingual in English and Mandarin to communicate with colleagues who can only speak in mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Responsibilities:

• To assist the engineers to sustain and improve all equipment performance indices to meet operations goals.
• Perform shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production
• Perform scheduled equipment preventive maintenance (PM), calibration and troubleshoot equipment-related problems on a timely basis to minimize equipment downtime
• Assist engineers in the installation and hook-up of new equipment
• Perform task with zero error
• Prepare consumables/preventive maintenance parts to ensure adequate provision
• Participate in continuous improvement programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives
• Assist in implementing process improvement projects
• Ensure good housekeeping and safety practices in the Fab
• Safe custody of tools, equipment and other properties belonging to the Module
• Assist new associate engineers on their on-the-job-training (OJT) by acting as their buddy

Requirements:

• Diploma in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology or equivalent
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, electrical/ pneumatic/ hydraulic control system, digital principle, wafer fabrication processes, pump and vacuum system and electrical wiring system
• Good Team Player
• Good Problem-Solving skills
• Able to perform 12-hour rotating shift

About Bruker:

Bruker is enabling scientists to make breakthrough discoveries and develop new applications that improve the quality of human life. Bruker’s high performance scientific instruments and high value analytical and diagnostic solutions enable scientists to explore life and materials at molecular, cellular, and microscopic levels. In close cooperation with our customers, Bruker is enabling innovation, improved productivity, and customer success in life science molecular and cell biology research, in applied and pharma applications, in microscopy and nanoanalysis, as well as in industrial applications. Today, worldwide more than 8500 employees are working on this permanent challenge at over 90 locations.

Today, worldwide more than 9700 employees are working on this permanent challenge at over 90 locations on all continents. Bruker continues to build upon its extensive range of products and solutions, its broad base of installed systems and a strong reputation among its customers. Being one of the world's leading analytical instrumentation companies, Bruker is strongly committed to further fully meet its customers’ needs as well as to continue to develop state-of-the-art technologies and innovative solutions for today's analytical questions.

Bruker - Innovation with Integrity.

Please visit www.bruker.com.

Bruker Singapore is seeking for a Field Service Engineer within the service organization. He/She is an ambassador of Bruker Nano Surfaces Metrology (BNSM) instrumentation and technology. Bruker Nano Surfaces Metrology manufactures the world's leading Atomic Forces Microscopes, Stylus profilers, Mechanical Testers, X-Ray Diffractometer and non-contact 3D optical microscope instrumentation. This technical role responsible for customer direct post-sale instrumentation and application support including: installation, user and application training, instrument diagnostics/fix, and post-sale applications support. Individual must be customer focused with a strong technical background enabling our customers to maintain their instrument at peak performance and maximize productivity for their intended use case.

SUMMARY OF RESPONSIBILITIES:

• Performs site surveys, pre-installation, installation of Bruker Semiconductor Metrology Tools (AAFM(NanoMet), AFMi, TSOM & X-ray) for customers both domestic and international
• Provide high level technical support to external customers at their location
• Provide on-­site training to the customers
• Interface with cross functional work teams such as field applications, customer support/services, product management, manufacturing and marketing/sales
• Develop Service technical documentation
• Create, develop, and continuously improve the customer support & applications knowledge database
• Timely and professionally handle field service calls and issues arising from the field service
• Performs basic applications support of Bruker Semiconductor Metrology Tools for customers both domestic and international
• Visits, triage with field applications scientists as appropriate
• Timely complete and submit all required paperwork
• Flexible schedule to accommodate our customer’s needs
• Effectively handle multiple priorities, organize workload, and meet deadlines
• Communicate with the customer to ensure satisfaction and implement any necessary corrective actions
• Up to 30% traveling required within Southeast Asia (at times with short notice)
• Misc. other duties commensurate with the capabilities of a Field Service Engineer

ESSENTIAL FUNCTIONS:

• 90% Technical support (Diagnostics/troubleshooting/on-site/phone/e-mail/web-ex/SAP RMAs, etc.)
• 10% Knowledge database development, delivery of training, basic application support and Escalation support (technical analysis, cross-functional engagement, plan of action, on-site support, etc…)

ADDITIONAL RESPONSIBILITIES:

• Pre-sales support
• Other duties as assigned

EDUCATIONAL/EXPERIENCE REQUIREMENTS:

• Bachelor’s degree or equivalent technical qualifications in electrical/ mechanical engineering or physical sciences. Masters or higher-level education is preferred. Metrology experience within Semiconductor Market an advantage.
• Working knowledge of MS Office, Excel. Working knowledge and ability to test and troubleshoot mechanical, electrical analog and factory Automation
• Up to 5 years of relevant Semiconductor industry experience, preferably metrology products and with hands on instrument experiences.
• AAFM, AFM and X-ray service experience or background in Technical Support preferred.

Interested candidates, please apply via Bruker's career portal directly : https://bit.ly/48OlAj5

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span industries and geographical regions; and our focus is to engage in the dynamics of our customers’ vertical markets; including financial services, TMT (telecommunications, media and technology), education, healthcare, retail, government, manufacturing and professional services, and apply the skills of our 6,500 employees in modernising key digital pillars; data centre and cloud services, security and network infrastructure, workspace communications and collaboration, data and information strategies, and IT operation modernisation.

We are the advocates for our customers for some of the world’s leading technology companies including Cisco, HPE, IBM, CA Technologies, NetApp, Microsoft, Oracle, VMware and ServiceNow.

The Logicalis Group has annualised revenues of $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4.3 billion.

Summary of Position

The Enterprise Senior Networking engineer is a technical implementation role who will focus on delivering Enterprise Networking Technologies Data Centre, Wireless Routing & Switching, Software Defined solutions to new and existing customers.

The position will be a critical member of the Service Delivery team who designs and builds new Infrastructure. This role will work directly with customers to capture business requirements, share best practices, make recommendations, document the optimal design, provide trainings and build the approved solution.

This role may also support business development activities by providing demos or POV for the mentioned technologies below.

Responsibilites:

• Designing and implementing network and security solutions: Responsible for designing and implementing network and security solutions for clients, which may involve configuring routers, switches, wireless, load balancers and other network devices. Racking and Stacking network devices. Expected able to handle mid-sized to mega-sized project.
• Troubleshooting network and security issues: Responsible for diagnosing and resolving network and security issues that arise for clients while deploying, which may involve investigating connectivity problems, configuration issues, and analyzing network traffic.
• Client management: Responsible for building and maintaining relationships with clients, managing their expectations, and ensuring their needs are met.
• Collaboration with other teams: Working closely with other teams such as project managers and Operations team to ensure the network delivery is completed within the stipulated time.
• Technical Documentation: Responsible for creating technical documentation such as Low-Level Design, TDS, As-built, UAT and SAT documents. Signoff all the documents from clients for the project closure.
• Knowledge Transfer: Responsible for providing handover the project to Client and internal operations team.
• Provide guidance and mentorship: Conduct knowledge sharing sessions to keep the team updated on the best practices.

Requirements:

• Possess at least a Diploma, Bachelor's Degree, or Professional Degree in Computer Science/Information Technology or equivalent
• Minimum 5-10 years of experience in network design/deployment.
• Excellent knowledge in Routing and switching, eg. BGP, OSPF, Multicast, VSS, spanning tree, MPLS L3VPN.
• Experience in wireless. Cisco WLC, Aruba, Prime, MSE/CMX, DNAC, Ekahau Site Survey tool
• Data centre technologies, eg. Cisco Nexus VDC, VPC, FEX, VXLAN, ACI.
• Good knowledge of Firewall technologies eg. IPSEC VPN, SSL VPN, IPS/IDS, Cisco ASA, Firepower, Fortigate,
• Good knowledge in network access control(NAC) product, eg Aruba Clearpass Policy Manager, Cisco ISE.
• Excellent interpersonal & communication skills
• Current CCNP qualified with related professional experience, CCIE would be an advantage.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernising key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernisation.

Logicalis Group has an annualised revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

As we continue to grow as a business, our people are our key differentiator with our competitors, and developing and retaining our talent is a key priority for all of our businesses. We will recommend that you watch this short video with input from our employees around the world.

Job Summary:

We are currently looking for a Senior Security Project Engineer to join our Professional Services Team delivering Security Projects encompassing predominantly NAC, Firewall, PS and MFA solutions. Qualified candidate is expected to have hands-on experience in delivering such solutions. This role presents itself with considerable learning opportunities on the state-of-the art security technologies.

Accountabilities:

• Develop low level design document for the project delivery detailing the scope with the sensible technology write up.
• Participate in Internal/Customer meetings to develop the LLD document.
• In-depth technical knowledge and good working experience in implementing and supporting Cisco ISE and HPE Aruba ClearPass NAC solutions.
• Prepare UAT document and perform UAT as per document.
• Understanding of Windows Active Directory and Integration with NAC Solutions
• Proficient with hands-on experience delivering Firewall migrations and fine-tuning Firewall/IPS policies.
• Ability to deliver MFA Solutions for specific use case requirements.
• Assist in reviewing Technical Design Specifications (TDS) document for security projects
• Proactively participate in maintaining internal knowledgebase sharing technical findings within the Team.

The Individual and their Experience:

• Network Access Control (dot1x) experience of Cisco ISE and HPE Aruba ClearPass (Mandatory).
• Firewall Migration expertise across multi-vendor platforms- Cisco ASA/FTD, Palo Alto, Fortigate, Checkpoint.
• Hands on experience Cisco FirePower NGIPS.
• Basic understanding of Networking – Routing and Switching Protocols.
• Ability to manage medium to large size project and ensure completion within the projected timeline.
• Build customer relationship to manage the projects in a congenial way.
• Team Player highly spirited, sharing project experience with peers.
• Able to learn and adopt new skills when projects warrant based on the relevant training provided.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Job Responsibilities:

•Lots handling, WAT analysis and process optimization

•Device development, Yield trouble shooting and reliability improvement

•Fab transfer & Customers handling

•Customized structure process integration development

• To be responsible for helping to drive leading edge process/device development and optimization of devices in order to meet scaling, performance, reliability, and manufacturability requirements.

• Identify and solve IC process and device problems

Job Qualification

•Bachelor degree or above in Materials Science, Electrical Engineering, Chemical Engineering, Mechanical Engineering, Physics, Chemistry or a related engineer discipline.

• 5+ Years Experienced Process Engineering

• Fab 12" knowledge is preferred

• Knowledge of Statistical Process Control (SPC) and/or Design of Experiments (DOE) principles

•Good communication skills, be able to work within cross-functional teams, including internal and external partners

Key Responsibilities:

Design & Development:

Assist in designing, developing, and testing electronic circuits and systems.

Support PCB (Printed Circuit Board) design, layout, and testing.

Assist in developing prototypes and performing hardware debugging and troubleshooting.

Software Development & Embedded Systems:

Collaborate on developing embedded software for microprocessors and other embedded systems.

Assist in the integration of hardware and software components for electronic systems.

Support programming tasks using C, C++, or Python in embedded environments.

Testing & Evaluation:

Assist with hardware and software testing, verification, and validation of electronic devices.

Document test results and work with engineers to identify areas for improvement.

Research & Development:

Contribute to the research of new technologies and innovations in electronics and computer engineering.

Support the team in evaluating new components, tools, and methodologies.

Collaboration & Reporting:

Collaborate closely with engineers, software developers, and product teams to meet project requirements and deadlines.

Prepare technical documentation and reports for internal review.

Qualifications:

Currently pursuing a Diploma or Bachelor’s or degree in Electronic Engineering, Computer Engineering, Electrical Engineering, or related field.

Strong knowledge of electronic circuit design, digital systems, and embedded systems.

Proficiency in programming languages such as C, C++, and Python.

Basic understanding of microprocessors, and FPGA-based systems is a plus.

Ability to work independently as well as collaboratively in a fast-paced environment.

Strong problem-solving skills, attention to detail, and excellent communication skills.

Preferred Skills & Experience:

Experience with hardware/software co-design and integration.

Familiarity with debugging tools such as oscilloscopes, logic analyzers, and multi-meters.

Knowledge of wireless communication protocols (e.g., Bluetooth, Wi-Fi, Zigbee).

Understanding of machine learning and AI applications in embedded systems (a plus).

What We Offer:

Mentorship from experienced engineers.

Opportunity to work on impactful, real-world projects.

About DKatalis

DKatalis is a financial technology company with multiple offices in the APAC region. In our quest to build a better financial world, one of our key goals is to create an ecosystem-linked financial services business.

DKatalis is built and backed by experienced and successful entrepreneurs, bankers, and investors in Singapore and Indonesia who have more than 30 years of financial domain experience and are from top-tier schools like Stanford, Cambridge London Business School, JNU with more than 30 years of building financial services/banking experience from Bank BTPN, Danamon, Citibank, McKinsey & Co, Northstar, Farallon Capital, and HSBC.

About the role

You will be part of a cross-functional agile engineering team (squad) responsible to build, deploy and run (support) one or more of our digital products, focusing on full-stack experience to build robust & resilient systems (front-end & back-end).

You will work closely with Engineers, Product, Design, and other stakeholders, collaboratively ensuring quality gets built in the product, get to see your impact in everyday lives of many people, and have great fun while doing it.

You will share your learnings within and beyond your team (squad) and mentor budding engineers for good engineering practices

What will you do

• Working with engineering+product owners to design, refine and develop the product, from concept to implementation.
• Main contributor in creating best in-class product & experience for our customers by designing, building, scaling, and evolving our platforms, services, and tools
• Communicate, collaborate and work effectively across cross functional teams in a multicultural environment
• Mentor a team of highly talented and motivated engineers
• Ensure the performance, security, and responsiveness of applications built
• Continuously improve code quality, product execution, automatization and customer delight

What you need to have

• You have at least 10+ years of professional experience in a similar role developing highly scalable applications
• Good written and spoken English
• Hands on expertise in Java / Javascript or its derivatives (Typescript, NodeJS, Scala, Kotlin, Springboot, etc)
• Have hands on experience on one of this front-end development (Flutter Preferred)
• Experience to Lean/XP practices (TDD, Pair Programming, Continuous Integration/Delivery for both Mobile & Back-end)
• Experience working in Agile Software development
• Communicate, collaborate, and work effectively across distributed teams in a multicultural environment.
• You’re excited about delivering end-to-end experiences and care about your software architecture across the front-end, back-end, and the APIs that glue them together
• A passion for quality and best practices but with a pragmatism that understands the
  balance between perfection and delivering value in a timely manner.
• Enjoys mentoring more junior engineers on good engineering practices & share knowledge

Department Overview:

Aristos Solutions BU focus on creating customised state-of-the-art automation solutions for all possible industries. By utilising Akribis Systems' direct drive linear and rotary system, we are able to achieve high speed and high precision assembly, inspection or testing solution for our customer.

Job Description

• Application support and setup of motion control system, machine vision system, signal and control devices, used in motion control products and automation equipment
• Design of electrical schematic diagram, single line diagram, cable harness and build, for motion controller systems, device and sensors, used in Industrial automation machine and equipment
• Perform DOE for risk mitigation and feasibility studies on design concept
• Creation of Bill of Material of cables assembly and electrical component used in project
• Review and guides the development of product manual and application notes for new products/applications
• Evaluate and recommend product / solutions for new applications according to customer’s specification
• Understand and help to resolve application issues encountered in projects and by customer
• Work with team to fomulate work instructions
• Machine commisioning in factory/customer Site
• Ensure design meets project required milestone and timeline
• Provide training to customer
• Overseas travel is required with short notice period

Qualifications

• Candidate must process at least Bachelor Degree in Mechanical / Electrical / Mechatronic Engineering or equivalent OR-Fresh graduates with relevant knowledge in their course of study are welcome to apply.
• Knowledge in programming and / or experience in automation field are added advantage
• Preferably with 1-2 Year(s) of working experience in Industrial Automation, Semiconductor or any other related field/industry is required for this position.

Other Information

Skillset(s) Requirement:

• Required Knowledge: Power sizing, power distribution, motion control (advantage)
• Required Skill(s): AutoCAD, Solidworks, Motion control software (advantage)

Attributes:

• Strong communication and analytical skills, energetic and willing to work hard
• Ability to prioritize and multi-task in a fast-paced environment
• Responsible, Positive Attitude and able to work well as a team
• Possess good initiative and good critical thinking skill to solve issue at root cause level

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Etch diverse team of talent. You will be responsible to manage the integration of all modules' processes and the respective derivatives.

What you will be working on:

• Responsible for new Process Development and/or Process Transfer
• Process optimization for Yield and Productivity improvement
• Troubleshoot and resolve Process related issues
• Sustain and/or improve Process Capability, CpK
• Qualify and release tools for required MFG capacity
• Qualify alternate sources for Cost improvement
• Plan and execute Engineering Projects
• Continuous improvement through participation in 10k idea, LSS & BKM to create cost effective and robust processes with quality
• Setup, monitor and maintain SPC charts
• Adhere and complete necessary documentation

More about you:

• Bachelor Degree in Engineering / Science or equivalent
• 1-3 years relevant experience in Semiconductor manufacturing environment
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span industries and geographical regions; and our focus is to engage in the dynamics of our customers’ vertical markets; including financial services, TMT (telecommunications, media and technology), education, healthcare, retail, government, manufacturing and professional services, and apply the skills of our 6,500 employees in modernising key digital pillars; data centre and cloud services, security and network infrastructure, workspace communications and collaboration, data and information strategies, and IT operation modernisation.

We are the advocates for our customers for some of the world’s leading technology companies including Cisco, HPE, IBM, CA Technologies, NetApp, Microsoft, Oracle, VMware and ServiceNow.

The Logicalis Group has annualised revenues of $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4.3 billion.

Summary of Position

The Enterprise Networking engineer is a technical implementation role who will focus on delivering Enterprise Networking Technologies Data Centre, Wireless Routing & Switching, Software Defined solutions to new and existing customers.

The position will be a critical member of the Service Delivery team who designs and builds new Infrastructure. This role will work directly with customers to capture business requirements, share best practices, make recommendations, document the optimal design, provide trainings and build the approved solution.

This role may also support business development activities by providing demos or POV for the mentioned technologies below.

Responsiblities:

• Implementing network and security solutions: Responsible for implementing network and security solutions for clients, which may involve configuring routers, switches, wireless, load balancers and other network devices like Aruba. Racking and Stacking network devices. Expected to handle small to mid-sized project.
• Troubleshooting network and security issues: Responsible for diagnosing and resolving network and security issues that arise for clients while deploying, which may involve investigating connectivity problems, configuration issues, and analyzing network traffic.
• Client management: Responsible for building and maintaining relationships with clients, managing their expectations, and ensuring their needs are met.
• Collaboration with other teams: Working closely with other teams such as project managers and Operations team to ensure the network and security delivery is completed within the stipulated time.
• Technical Documentation: Responsible for creating technical documentation such as Low-Level Design, TDS, As-built, UAT and SAT documents. Signoff all the documents from clients for the project closure.
• Knowledge Transfer: Responsible for providing handover the project to client and internal operations team.

Requirements:

• Possess at least a Diploma, Bachelor's Degree, or Professional Degree in Computer Science/Information Technology or equivalent
• Minimum 1-5 years of experience in network design/deployment.
• Excellent knowledge in Routing and switching, eg. BGP, OSPF, Multicast, VSS, spanning tree, MPLS L3VPN.
• Experience in wireless. Cisco WLC, Aruba, Prime, MSE/CMX, DNAC, Ekahau Site Survey tool
• Data centre technologies, eg. Cisco Nexus VDC, VPC, FEX, VXLAN, ACI.
• Good knowledge of Firewall technologies eg. IPSEC VPN, SSL VPN, IPS/IDS, Cisco ASA, Firepower, Fortigate,
• Good knowledge in network access control(NAC) product, eg Aruba Clearpass Policy Manager, Cisco ISE.
• Excellent interpersonal & communication skills
• Current CCNA/CCNP qualified with related professional experience, CCIE would be an advantage.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span industries and geographical regions; and our focus is to engage in the dynamics of our customers’ vertical markets; including financial services, TMT (telecommunications, media and technology), education, healthcare, retail, government, manufacturing and professional services, and apply the skills of our 6,500 employees in modernising key digital pillars; data centre and cloud services, security and network infrastructure, workspace communications and collaboration, data and information strategies, and IT operation modernisation.

We are the advocates for our customers for some of the world’s leading technology companies including Cisco, HPE, IBM, CA Technologies, NetApp, Microsoft, Oracle, VMware and ServiceNow.

The Logicalis Group has annualised revenues of $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4.3 billion.

Summary of Position

The Enterprise Senior Networking engineer is a technical implementation role who will focus on delivering Enterprise Networking Technologies Data Centre, Wireless Routing & Switching, Software Defined solutions to new and existing customers.

The position will be a critical member of the Service Delivery team who designs and builds new Infrastructure. This role will work directly with customers to capture business requirements, share best practices, make recommendations, document the optimal design, provide trainings and build the approved solution.

This role may also support business development activities by providing demos or POV for the mentioned technologies below.

Responsibilites:

• Designing and implementing network and security solutions: Responsible for designing and implementing network and security solutions for clients, which may involve configuring routers, switches, wireless, load balancers and other network devices. Racking and Stacking network devices. Expected able to handle mid-sized to mega-sized project.
• Troubleshooting network and security issues: Responsible for diagnosing and resolving network and security issues that arise for clients while deploying, which may involve investigating connectivity problems, configuration issues, and analyzing network traffic.
• Client management: Responsible for building and maintaining relationships with clients, managing their expectations, and ensuring their needs are met.
• Collaboration with other teams: Working closely with other teams such as project managers and Operations team to ensure the network delivery is completed within the stipulated time.
• Technical Documentation: Responsible for creating technical documentation such as Low-Level Design, TDS, As-built, UAT and SAT documents. Signoff all the documents from clients for the project closure.
• Knowledge Transfer: Responsible for providing handover the project to Client and internal operations team.
• Provide guidance and mentorship: Conduct knowledge sharing sessions to keep the team updated on the best practices.

Requirements:

• Possess at least a Diploma, Bachelor's Degree, or Professional Degree in Computer Science/Information Technology or equivalent
• Minimum 5-10 years of experience in network design/deployment.
• Excellent knowledge in Routing and switching, eg. BGP, OSPF, Multicast, VSS, spanning tree, MPLS L3VPN.
• Experience in wireless. Cisco WLC, Aruba, Prime, MSE/CMX, DNAC, Ekahau Site Survey tool
• Data centre technologies, eg. Cisco Nexus VDC, VPC, FEX, VXLAN, ACI.
• Good knowledge of Firewall technologies eg. IPSEC VPN, SSL VPN, IPS/IDS, Cisco ASA, Firepower, Fortigate,
• Good knowledge in network access control(NAC) product, eg Aruba Clearpass Policy Manager, Cisco ISE.
• Excellent interpersonal & communication skills
• Current CCNP qualified with related professional experience, CCIE would be an advantage.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a EQUIPMENT ENGINEER to be paart of our ETCH DEPARTMENTdiverse team of talent. You will be responsible for equipment preventive maintenance and equipment performance indices.

What you will be working on:

• Establish systems/guidance in sustaining and improving all equipment performance indices to meet operations goals.
• Perform shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production when requested.
• Perform scheduled equipment preventive maintenance (PM), calibration and troubleshoot equipment-related problems on a timely basis to minimize equipment downtime.
• Conduct installation and hook-up of new equipment.
• Perform task with zero error.
• Establish work procedures, corrective actions and preventions
• Oversee the preparation of consumables/preventive maintenance parts to ensure adequate provision.
• Participate in continuous improvement programs to improve productivity and output quality of the Module, and constantly monitor and feedback to the team to improve performance of equipment to meet Module objectives.
• Assist in implementing and managing process improvement projects.
• Ensure good housekeeping and safety practices in the Fab.
• Safe custody of tools, equipment and other properties belonging to the Module.
• Initiate, organize, develop and lead task-force for short term problem solving and long term continuous improvement.

More About You:

• Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics or equivalent
• 2-5 years semiconductor wafer fab experience as an Equipment Engineer
• Engineering knowledge, which may include semiconductor devices theory, electronics, electrical/ pneumatic/ hydraulic control system, digital principle, wafer fabrication processes, pump and vacuum system and electrical wiring system
• Familiar with TEL Unity DRM/ ME+ Platform and Dry Strippers
• Good Team Player
• Good Analytical & Problem-Solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Associate Engineer to be part of our Photolithography Equipment diverse team of talent.

What you will be working on:

• To assist the engineers to sustain and improve all equipment performance indices to meet operations goals.
• Perform shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production.
• Perform scheduled equipment preventive maintenance (PM), calibration, troubleshooting and monitoring of equipment-related problems on a timely basis to minimize equipment downtime.
• Assist engineers in the installation and hook-up of new equipment.
• Perform task with zero error.
• Prepare consumables/preventive maintenance parts to ensure adequate provision.
• Participate in continuous improvement programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives.
• Assist in implementing process improvement projects.
• Ensure good housekeeping and safety practices in the Fab.
• Safe custody of tools, equipment and other properties belonging to the Module.
• Assist new associate engineers on their on-the-job-training (OJT) by acting as their buddy.

More about you:

• Diploma in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology or equivalent
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, electrical/ pneumatic/ hydraulic control system, digital principle, wafer fabrication processes, pump and vacuum system and electrical wiring system
• Experience in TRACK ACT8/Mark8
• Good Problem-Solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span industries and geographical regions; and our focus is to engage in the dynamics of our customers’ vertical markets; including financial services, TMT (telecommunications, media and technology), education, healthcare, retail, government, manufacturing and professional services, and apply the skills of our 6,500 employees in modernising key digital pillars; data centre and cloud services, security and network infrastructure, workspace communications and collaboration, data and information strategies, and IT operation modernisation.

We are the advocates for our customers for some of the world’s leading technology companies including Cisco, HPE, IBM, CA Technologies, NetApp, Microsoft, Oracle, VMware and ServiceNow.

The Logicalis Group has annualised revenues of $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4.3 billion.

Job Summary

The Senior Network Operations Engineer is an Operations role whom will focus on SLA driven Level 3 Incident Management which encompasses responding and resolution of Network, Wireless, Security Infra related issues. The position will be a critical member of the Operations team whom are the higher level and Sev 1 n 2 escalations to diagnose and troubleshoot fault incidents. This role will work directly with customers to gather the fault symptoms and provide the resolution or work around and share best practices, make recommendations, document the issues, provide root cause incident reports. The job scope includes extensive support to client network support team to perform activities in network health check, wireless testing, user issues, break fix, preparing Incident root cause reports.

Responsibilities:

• Understand the process and practices related to GNC support Templates and Standard Operating Procedures
• Perform IOS upgrades and patches to fix software and ensure that the environment is bug/vulnerable free by keeping system with up to date software.
• Troubleshoot production issues and network problems to fix any user related issues and work with principal vendors and customer to provide the resolution with in the proposed timelines.
• Field engineer responsible for handling support issues on Enterprise Networking Platforms and Solutions related to Routing, Switching, Wireless, NAC, Security. Includes Vendors such as Cisco / Aruba / Fortinet / Riverbed / Palo Alto / F5 etc
• Under take escalation for Enterprise Networking related matters from level 1 helpdesk engineers, perform level 3 on site troubleshooting and hardware field replacement works for Enterprise Networking Solutions.
• Be part of a team of engineers that performs 24 hours standby duties on a rotational basis.
• Responsible for updating technical documentations for configuration changes made via helpdesks and/or managed services customers.
• Responsible for opening and closing of support tickets when applicable and providing timely updates to helpdesk personnel and customer for support cases that has been allocated to you
• Work closely with various team of engineers for troubleshooting in relation to Enterprise Networking incidents.

Qualifications:

• Minimum 5 years of relevant experiences in network operations including network, wireless, security technologies.
• Hands on experience in fixing user issues in production environment is essential
• CCNA/CCNP/CCIE certified plus any other networking certifications preferred
• Strong understanding about Enterprise Networking Solutions such as VSS,
• VPC, Multicast , MPLS etc..
• Ability in performing local / remote IOS upgrades on different products and RMAs for faulty devices in production

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Job Responsibilities :

• Communicate, coordinate, and integrate department resources to enhance efficiency and achieve departmental goals and objectives.

• Oversee team member assignments, manage project scheduling, and track project progress to ensure timely and successful completion.

• Implement cost control measures and optimize resource allocation to maximize department performance.

• Foster team development through targeted training and mentorship programs, ensuring the success and growth of team members.

Job Qualification

• Master’s degree in a related field, such as Chemistry, Chemical Engineering, or Material Science.

• Over 5 years of relevant work experience.

• Strong knowledge of 12-inch semiconductor diffusion processes, including furnace, ion implantation, and Wet Bench System.

• Proven ability to identify, assess and solve problems

• Analytical with good interpersonal skills

• Team leader with execellent communication/coordination skill.

Job Duties

• Capacity planning and management.

• Tool Productivity improvement.

• Capital investment evaluation and control.

• Fab space layout planning.

Job Qualification

• Bachelor degree or above in Industrial Engineering, Business, or related engineering field is required.

• 5+ years of experience in Fab

• Global mindset, Self-motivated, high personal standard,

• Strong analytical and problem-solving skills.

• Programming skills, knowledge about IC process and logistic flow are preferred.

Responsibilities:

The job focuses on the development of image and signal processing algorithms for the next generations of optical inspection and metrology systems. The responsibilities of this position covers the entire life cycle of algorithms, including modeling, proof-of-concept design, production software design and implementation, performance characterization, documentation and user support. Since algorithms can affect many aspects of the system, significant amount of time be spent on cross-function team collaboration for prototyping and testing.

Requirements:

• Ph.D. in Electrical Engineering, Computer Science and Physics with strong experience in algorithm development is preferred.
• The position requires a proven innovative track record and solid fundamental knowledge in the related fields of algorithm development, including image segmentation, texture analysis, classification, feature extraction, statistical data analysis, machine learning, signal processing, filter theory.
• Experience in any one of the following areas is a big plus: algorithm performance optimization, deep learning, distributed computing, parallel computing.
• Software skills required include C/C++, OOD/OOP, MATLAB and/or Python.
• The candidate needs to be a self-motivated individual with ability to work independently and/or in a team. Strong written and verbal communications skills are needed for extensive interactions with members of a multi-disciplinary global team.

Minimum Qualifications:

• Doctorate (Academic) Degree and 0 years related work experience; Master's Level Degree and related work experience of 3 years; Bachelor's Level Degree and related work experience of 5 years

The New Product Introduction (NPI) process engineer will provide Dermcut Medical Pte Ltd with technical support and operating knowledge for our medical device operation. This role will conduct critical engineering functions such as product validation, troubleshooting, identifying and implementing process improvements.

The engineer will work closely with project manager and is in charge of taking the prototype from pilot scale into full scale manufacturing in support of commercial efforts. This position will focus on developing various processes and implementing those to support mass production.

Primary Responsibilities

• Establish processes based on product specifications.
• Develop control plans, gage repeatability & reproducibility, test method verification & validation, and pFMEA.
• Identify areas of process improvement to reduce and minimize process related nonconformance incidents and to maximize efficiency of the process.
• Co-ordinate the generation of dossier including but not limited to design files, technical files and project files to include design outputs, shelf-life studies, biocompatibility, sterilisation, risk analysis, validation master plans, IQ's, OQ's, PQ's and test regimes.
• Responsible for screening and optimization of process parameters to achieve robust and stable processes and maximize yields, efficiencies and process capabilities.
• Perform other related duties and responsibilities as assigned.

Education / Experience Requirements

• Bachelor’s degree in process engineering or similar qualification.
• A minimum of 2 years’ experience in the medical device industry.
• A strong understanding of validation strategy (IQ/OQ/PQ), support protocols and reports.
• Experience in root cause analysis of technical discrepancies/abnormalities.
• Familiar with FDA documentation requirements, ISO 13485 quality management system, lean manufacturing, and good manufacturing practice.
• Experience with SolidWorks and Microsoft Project preferred.

Job Description & Requirements

Responsibilities

• Coordination of Mechanical,Electrical, P&S design and installation.
• Ensure all works are carry out accordingly to drawings, specification, and compliance to authorities’ requirements.
• Site coordination and manage M&E personnel on work progress, drawings,material, samples, method statement submission and approval, to ensure quality and timely completion.
• Manage and Coordinate SWC.
• Preparation of CSD & SEM or CCSM drawings.
• Monitoring of construction installation, field coordination and provide necessary problem solving.
• Carry out testing requirement, inspection with consultants.
• Conduct T&C and Handover to Client.
• Proper documentation of all test report, equipment records and As-built drawings.
• Supervision of workers and sub-contractor to ensure safety and compliance of work on site.
• Adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship.
• Other duties as assigned.

Requirements

• Minimum 5 years of engineering experience with Recognized Degree in relevant field.
• Minimum 3 years of supervision experience of E&M work in construction site for projects of similar scale and complexity.