• In-house Support IT
• Support and maintain WAN/LAN network links and equipment's
• Administration of the Servers
• Support and maintain the Firewall System
• Fault diagnosis and resolution of software and system errors on the desktop
• Fault diagnosis of desktop hardware and co-ordination of repairs and replacements
• Software installation and decommissioning of desktop hardware
• Outdoor / Onsite Project Support for IT Related Products
• Interactive Panel Firmware update
• Network Devices Firmware update
• IP configuration of network devices
• Support Product Preventive Maintenance
• Support Interactive Panel Set up
• Any other task assign by Superior

Job Responsibilities:

• Novel BCD platform device development.
• TCAD device simulation and deck calibration.
• Device test key design, layout, analysis.
• Device bench testing (DC/HV/reliability) and characterization.
• Device tuning, on time delivery, pass reliability qualification.

Required Capabilities:

• Solid semiconductor device physics and analysis skill, strong knowledge on bipolar and power devices.
• Experienced in BCD device development/ characterization is preferred.
• Hands on TCAD simulation/ calibration, layout skill, power device bench test is preferred.
• Good communication and team work skill.
• Self-motived and avid learner.

Qualifications:

• Preferred Master's or Ph.D. degree in Physics or Electrical Engineering.
• Relevant working experience in BCD development is preferred.
• Proficient in both oral and written English.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Equipment Engineer to be part of our Diffusion Department diverse team of talent.

Responsibilities:

• Responsible for daily operations in the Diffusion CMP Equipment Module.
• Perform corrective & preventive maintenance on equipment to maintain good quality & productivity performance.
• Provide 24×7 support for troubleshooting equipment & problem solving in Factory operations floor.
• Maintain documentations for equipment installation, maintenance and troubleshooting procedures for reference purposes.
• Develop continuous improvement to enhance equipment reliability and cost of ownership.
• Drive innovation in factory automation, processes and systems to improve productivity.
• Coordinate, supervise & develop a team of high performance equipment engineers.

Requirements:

• Degree in Chemical/Electrical & Electronics/Materials/Mechanical/Microelectronics/Physics or equivalent
• Familiar with Mirra polishing tools and DNS Scrubber
• Highly motivated & strong team player
• Possesses good communication and interpersonal skills
• Quality 1st mindset & strong analytical, problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

About the Centre for Quantum Technologies (CQT)

The Centre for Quantum Technologies (CQT) in Singapore brings together physicists, computer scientists and engineers to do basic research on quantum physics and to build devices based on quantum phenomena. Experts in this new discipline of quantum technologies are applying their discoveries in computing, communications, and sensing.

CQT is hosted by the National University of Singapore. The Centre also has staff at the Agency for Science, Technology and Research, Nanyang Technological University, Singapore, and the Singapore University of Technology and Design. With some 200 staff and students, it offers a friendly and international work environment

Learn more about CQT at www.quantumlah.org

Job Description

The Centre for Quantum Technologies (CQT), National University of Singapore is looking for researchers and engineers to develop next generation quantum computers based on trapped ions. There are multiple positions available at different levels with a diverse set of expertise. This program is funded under the National Quantum Processor Initiative, a flagship program under the National Quantum Office Singapore. The aim of the program is to develop a full stack quantum processor based on Yb-Ba ions. This program brings together the unique capabilities of the existing ion trap groups in CQT expertizing on these two-ion species to explore scalability of the system.

The Centre for Quantum Technologies is a pioneering quantum centre in the world offering a diverse research culture at the intersection of three different fields namely, theoretical, experimental Physics and computer science. We offer competitive salary and enriching intellectual experience in a city state known for its forward outlook. This program also allows strong collaboration with leading academic and industrial groups within and outside the country.

The team members will work to build electronics to control the ion trap quantum processor. That includes digital design, RF and microwave sources and low noise analog / digital front end. The ideal candidate should have practical experience in at least one of the following fields and desire to cross the boundaries and learn relevant skills.

The successful candidate will be involved in all stages of the development cycle: collaborate with other team members to define the technical requirements, design, manufacturing, testing and integration of the prototype into the control system.

Job Requirements

We are looking for several electrical engineers to join the small team of scientists and engineers working on the next generation of the ion trap quantum processor. The candidate should have:

• Bachelor or Master degree in electronics, electrical engineering or related fields;
• At least 1-2 years of experience in electronics design is preferred;
• Experience in programmable digital logic design using Verilog or VHDL, digital signal processing, and familiarity with control theory;
• Design and characterisation of low noise electronics for the analog front end, good understanding of the noise sources in electronic circuits;
• Design and implementation of the RF electronics circuits.

Job Description

• Develop verification plans based on design-related documentation, set up the verification environment, and complete verification from module level to system level.
• Execute regression testing and enhance verification coverage.
• Collaborate with chip design engineers to identify and resolve design defects.
• Guide the design team in implementing a verification-friendly design flow.
• Perform RTL-level, gate-level, and low-power verification with UPF (Unified Power Format).
• Assist FPGA engineers and software engineers in completing FPGA prototype testing.
• Ensure the integrity and correctness of chip designs from multiple dimensions.

Requirements

• Bachelor’s degree or higher in Computer Science, Electrical Engineering, Communications Engineering, or related fields. 3+ years of work experience.
• Experience in design or verification of peripheral modules, communication modules, or SoC systems.
• Proficiency in Verilog and expertise in C/SystemVerilog.
• Knowledge of one or more scripting languages such as Python, Ruby, Perl, Shell, Tcl, or Makefile.
• Experience with UVM (Universal Verification Methodology) is a plus.
• Familiarity with the digital chip development process and successful tape-out project experience is an advantage.
• Experience with formal verification is a plus.

Job Description: Semiconductor Process Integration Engineer

Position Overview: We are seeking a highly-skilled Process Integration Engineer to join our team. The primary responsibility of this role is to develop and deliver advanced process modules with our partner foundry facilities for optoelectronic integrated circuits (ICs). The ideal candidate will have a strong background in semiconductor process technology and a proven track record of working effectively with external partners.

Key Responsibilities:

1. Process Development: You will join an existing team to design and develop semiconductor process flows to for a proprietary CMOS + III-V monolithic integration platform. You will integrate various process modules into a cohesive manufacturing process, optimizing for performance, yield, and reliability.

2. Collaboration with Fab Partners: You will be responsible for management of projects under your purview with one or more fab partners, including aspects such as budgeting, schedule and resource planning. You will work closely with fab partners to develop, optimize, and implement process modules for optoelectronic ICs, ensuring compatibility with fab partner manufacturing protocols. You will provide technical support and feedback to fab partners, troubleshooting process-related issues and implementing corrective actions. You may also be embedded within the fab partner’s team for specific durations during critical phases of the process development effort.

3. Data Analysis: You will analyze process data to identify trends, root causes of issues, and opportunities for process improvements. You will also design experiments and test plans to retire technical risks and resolve process issues. You will also be responsible for maintaining detailed documentation of process development activities, including process flows, specifications, and test results.

Responsibilities:

• Collaborate with the presales team to conduct site surveys and assessments. This involves evaluating the customer's location, infrastructure, and specific requirements to determine the ideal setup and deployment for the robot.
• Responsible for setting up, commissioning the robot on-site and ensuring the robot is ready for operation.
• Perform thorough testing, identify and troubleshoot errors/failures and implement appropriate solutions to resolve the issues promptly.
• Handle repairs and maintenance tasks for the robot. This involves conducting regular maintenance activities as per the SOP/guidelines and addressing any breakdowns or equipment failures.
• Travel to customer sites, both local and international (whenever necessary), to provide on-site support, conduct setup/commissioning, perform maintenance tasks, and resolve technical issues at short notice to provide support or address urgent issues. Additionally, you should be willing to adapt to the customer's work environment and schedule, which may include night shifts and public holidays when necessary.
• Responsible for documenting service and fault reports. This includes accurately recording the details of the service provided, issues encountered, and the actions taken to resolve them. These reports are typically submitted to superiors and key individuals within the organization for review and analysis.
• Maintain detailed records of all tasks related to customer service. This includes maintaining customer service logs, updating internal service records, and ensuring all documentation is completed in a timely manner.
• Train customers and end-users on the proper handling, maintenance, and safety procedures of robot operation. Create and update documentation, including user manuals and service guides, to facilitate knowledge transfer and enhance support processes.

Requirements:

• Minimum Diploma in Engineering or other related fields
• 2 years of experience in servicing electronic and mechanical equipment / machines.
• Experience with troubleshooting and debugging hardware, electronics, and software.
• Excellent problem-solving skills and the ability to work under pressure in fast-paced environments.
• Effective communication skills with the ability to explain complex technical concepts to both technical and non-technical stakeholders.
• Strong communication skills in English (both oral and written)
• Tools: Basic knowledge on handling mechanical, electrical and electronic tools.
• Able to perform simple network configuration.
• Able to work independently and as part of a harmonious and effective team.
• Able to communicate well and tactfully with customers/distributors.

Qualification (s) – BE/ BTech/ MTech/MS/ PhD

Domain - Electronics, Electrical, Computer Engineering or Computer Science Engineering

Experience – 04 to 10 years

Highly motivated and driven to face the challenging design

problems

Architecture and Micro-architecture of complex digital SoCs

and mixed signals SoCs

Be able to communicate with system architects and decipher

system requirements and develop architectural specification of

the SoC

Understanding the future market requirements and develop

micro-architecture for the silicon to serve multiple generations

of market is a big plus.

Be able to micro-architect the chip considering low power and

high-performance techniques

Complete sign-off GDSII working with DV, DFT and PD

engineering teams.

Be able to comprehend usual service level agreement features

–

Power, Performance, Area and Customer Schedule, andaccordingly plan the development.

Preferred Expertise:

Architecting, micro-architecting and designing SOC for

embedded processors for storage, IoT, security and compute

applications

Functional safety, power management, coherency, security

Protocol knowledge - PCIe, NVMe, USB4.0, DDR, AXI, CHI,

AHB, MIPI, Display port, Ethernet

Design Techniques – Low-power, UPF, Clock Domain Crossing

(CDC), Booting/Reset Flow SW and/or hardware validation

Scripting Languages – Shell scripting, Python, TCL, PERL etc.

Responsibilities:

- Repairing, inspection, commissioning/installation of steam-and gas turbines and rotary machineries for ships and power generation. Cryogenic equipment services. Bulk material handling.

- Automation service and calibration. Control system service/trouble shooting (PLC). Boiler auto-combustion control and auto feed water control and burner overhauling.

- Willingness to work hands-on in marine, oil & gas industrial environment and work overtime (will be paid).

- Able to travel overseas (paid allowance) at short notice.

Requirements:

- Higher Nitec/Diploma/Degree or equivalent in Mechanical Engineering, Marine Engineering, Automation & Instrumentation/Mechatronics.

- With or without experience in related industry or sea-going experience.

- Good communication skills at all levels, from workers to Chief Engineer/Supt.

- Good command of English to write Service report and able to speak Mandarin with overseas clients.

- Working hours: 5 day/week 0800-1700 hours.

Interested candidates, able to speak English & Mandarin a must to liaise with overseas clients. Also written Service Report in English.

Please email resume with photo to [email protected]

Job Description:

We are seeking an experienced and detail-oriented Electrical Engineer specializing in the design, configuration, and troubleshooting of electrical control panels. The candidate will be responsible for ensuring all control systems are designed and maintained in compliance with industry standards and project requirements.Should be avaliable 24/7.Should able to work overseas. Should have class 3 Driving Licience 5 years experience in Singapore.

Key Responsibilities:

• Design and Drafting: Develop detailed electrical schematics, wiring diagrams, and layout drawings using AutoCAD or equivalent CAD software. Ensure adherence to applicable codes, standards, and safety regulations (e.g., NEC, IEC).
• Component Selection and Sizing: Calculate and size electrical components such as circuit breakers (CB), relays, contactors, and cables. Specify and integrate control devices like PLCs, VSDs, VFDs, HMI panels, and temperature controllers.
• Control Panel Assembly: Oversee the assembly, wiring, and testing of control panels, ensuring accuracy and quality. Work closely with technicians to provide guidance and address any assembly issues.
• Troubleshooting and Maintenance: Diagnose and resolve electrical and control system issues in a timely manner. Implement corrective actions and preventive maintenance strategies for control systems.
• Programming and Integration: Develop and modify PLC and SCADA programs for control system applications. Ensure seamless integration of control systems with other automation and instrumentation devices.
• Testing and Commissioning: Perform functional testing and validation of control panels and systems. Commission control panels on-site, including configuring and calibrating field devices and instrumentation.
• Project Management: Coordinate with project managers, clients, and other engineering disciplines to ensure project objectives are met. Prepare technical reports, documentation, and user manuals for control systems.

Qualifications:

• Bachelor's degree in Electrical Engineering or a related field.
• Minimum of 7 years of experience in control panel design, assembly, and troubleshooting.
• Proficiency in AutoCAD or equivalent CAD software.
• Strong knowledge of electrical standards and regulations (e.g., NEC, IEC).
• Hands-on experience with PLC and SCADA programming (e.g., Allen-Bradley, Siemens, ABB).
• Excellent problem-solving skills and attention to detail.
• Ability to work independently and as part of a team.
• Strong communication skills, both written and verbal.

Job Description:

Be part of an exciting Team working on cutting-edge advanced packaging process technologies. Partner and work with various FAB users, to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production. Responsibilities will also include assisting in operations support in FAB clean rooms to make sure all rounded supports are provided.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, and professional individual.
• Oversee the Team spare/ chemicals / inventories stores – upkeep with good house-keepings, periodic cycle counts. Maintain the inventory database, ensuring timely and accurate recordings, raise purchase requests accordingly.
• Take charge and provide day to day supports in all logistics needs and initiate material/spare parts procurement when required to ensure smooth Fab operations.
• Accountable for the inventory movements required to enable smooth lot operations across IME Premises.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time.
• Work seamlessly with various stakeholders to provide logistics support and deliver inventory on time.
• Work towards and employ critical thinking, put-up good initiatives to move forward to digitalization.
• Ability to work in a multi-task environment.

Experience:

• Education: Diploma in engineering discipline. Preferably in supply chain logistic/ warehouse operations.
• At least 2 years of warehouse operations.
• Preferably some experience in semiconductor / manufacturing environment, with good wide contacts with semiconductor material suppliers, equipment vendors.
• Strong knowledge-based on excel skills and some knowledge of supply chain analytics.

.Supervise project team and sub-contractors to take positive actions and accountability for their assigned work and complete their works on time as per agreed.

· Liase with Client, Consultants and Project team for planning, executive and completion of projects.

· Manage and supervise the team of technical staff and subcontractors carry out maintenance services, schedules, improvement works . To make sure standards of building performance, quality, time and cost schedules and safety complied.

· Leading monthly meetings and submission of routine reports.

· Oversea and overall responsible for works carried out by Junior Supervisors assigned.

· Responsible for keeping daily work schedule.

· Attend regular meetings with client , supplier and sub-contractors.

· Analyze, manage and track projects costs against budget

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Ensure all monitoring system of the building management faciities are in good operating condition (error free) and feedback on all alarms and errors generated form BMS.
• Perform scheduling of facilities and building management services to facilitate events and arising requirement.
• Reporting and compilation of daily, feedback, building management facilities faults and activities.
• Operate the plant at the most efficient operating condition and ensure all abnormities are reported for corrective actions
• Validate all facilities & Building management maintenance work carried out by the contractors and ensure compliance to the prescribed standards
• Perform routine building management facilities activities including inventory control. Critical systems checks and functional testing. Able to respond and take action in response to facilities crisis management activities including: power outages, fire alarms, ACMV outages.
• Analyse data and identify trends with facility issues to determine root cause and take appropriate action.
• Responds to BMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Provide technical support to all aspects M&E operations including the operation, maintenance and repair of all mission critical equipment and systems supporting a 24x7 activities to achieve 100% uptime and 100% compliance with all customer SLAs.
• Assist in all site construction activities and installations, in coordination with external contractors to ensure system design, installation and testing adhere to operational standards. Witness testing of all equipment during commissioning and validate sequence of operations and receipt of all operational documentation.
• Maintain compliance with local workplace safety & health (WSH) standards and local electrical and building codes.
• Ensure adherence to all standard operating procedures (SOP) and emergency response procedures (ERP) established for the critical environments, as well as the formal change control process.
• Participates in the building management maintenance of all significant planned and emergency maintenance events for the facility and ensure these activities are executed in a controlled and proven method to ensure the reliability of the critical loads supported by these systems.
• Participates in cross functional coordination

• Higher Nitec / Diploma / Degree in Mechanical or equivalent.
• Minimum 3 years' of practical electrical and mechanical engineering experience in managing and implementing electrical & mechanical systems for critical building management facilities for telecom, broadcast or data centre buildings.
• Respect, Teamwork and Drive.
• Hands on Troubleshooting
• Stay contactable 24 x 7
• Perform rotation Shift duties

Job Description :

We are looking for a skilled and proactive AV/IT Engineer who can take the lead on AV/IT initiatives and offer expert advice on AV/IT design and project plans, ensuring project needs are met, maintain, and monitor project timelines, intervening when necessary, onsite installation, upgrades, troubleshooting, take ownership and coordinate with others to support daily audio visual technical requests. Supervise and assist in the setup, troubleshooting and maintenance of audio visual systems. Perform preventative maintenance to ensure equipment is ready for use. Identify defective or failed equipment and resolve issues as they arise. Compile and analyze weekly reports, incident reports, and service report submissions, networking, and other in-house projects at customer premises. Programming, and basic construction setups Manage, test, and commission necessary devices. Ensure timely completion of testing, configuration, staging, and upgrades for assigned projects.

Requirements :

*Pass experience with working with Telcos is a must.

Core Responsibilities:

• Will normally work with a Site Engineer with the same areas of work.
• Execute, monitor and ensure the timely completion of the project
• Liaise with the Consultant Representative on project matters
• Coordinate with Site Engineer on the project matters.
• Coordinate with all Subcontractors on matters pertaining to site and quality issues;
• Ensure all contractual requirements are complied with agreed procedures.
• Keeping track on variation and claims of contract and cost impact and feedback information to the Site Engineer.
• Implement cost control measures to meet project budget.
• Co-ordinate with QAQC Engineer to ensure quality performance of project to meet customer requirements.
• Check working drawing, identify discrepancies for resolution.
• Check for quality of work according to specification and requirement;
• Maintain inspection records of works, materials and all completed works;
• To assist environmental aspects and impacts, and other environmental issues relating to EMS.
• Review project specifications, technical clarification and construction drawings.
• Coordinate with architect, structural engineer and M&E consultant and vendors to resolve construction and installation issues.

Site Based.

Report to Senior Engineer and Director.

Job Specifications

• Degree in Mechanial Engineering / Building Engineering or other building-related disciplines.
• 1-3 years' experience in building and construction projects.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Sustainability Engineer (ESG) to be part of our Supply Chain Department diverse team of talent. You will be responsible to support Company’s Environmental, Social and Governance (ESG) projects.

What you will be working on:

Project Management

- Lead and manage ESG projects & initiatives from inception to completion, ensuring alignment with corporate sustainability goals.

- Develop project plans, timelines, and budgets, and coordinate resources effectively.

- Prepare Capex Justification presentation in an accurate and timely manner to facilitate Management Team decision making

- Project lead in a cross functional team to ensure project schedule is executed in a timely manner and meeting project budget

Supply Chain

- Assist and take lead to drive the initiatives especially on Scope 3 Emissions

- Assess and quantify upstream and downstream emissions from the organization’s value chain, including suppliers, products, and waste disposal.

- Collaborate with suppliers and partners to develop and implement emission reduction initiatives, such as sustainable sourcing practices and transportation efficiency improvements.

- Review Supply Chain SOP & OI and ensure they are updated to ESG requirements

Reporting and Compliance

- Support Supply Chain Department on Company’s requirements for reports on sustainability metrics, including greenhouse gas emissions, energy consumption, and waste generation.

- Ensure compliance with regulatory requirements and industry standards related to sustainability and environmental management.

- Handle Compliance, Internal, Exernal and Customer audits to ensure compliance

- Liaison with related government bodies on grant and commercial apects

Continuous Improvement:

- Monitor and evaluate the effectiveness of sustainability initiatives and recommend improvements based on data analysis and industry best practices.

- Stay updated on emerging trends, technologies, and regulations in sustainability and incorporate relevant advancements into project strategies.

More about you:

• Degree in Chemical/Gas, Mechanical, Environmental, health and safety & other engineering.
• Possess knowledge on ESG, IPCC, RCA
• Preferably 4-5 years purchasing experience or engineering experience in a front end semiconductor plant .
• Knowledge and relevant experiences in Conflict Mineral, Green Procurement is a bonus.
• Knowledge in handling audits for Scope 1 emissions is a bonus

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

JOB HIGHLIGHTS

· Machine design in Mechanical aspect, Jig and Fixture, Equipment and development

· Provide Conceptual, mechanical part detailing and cost estimation

· BOM & machine manual writing

· Handle customers’ enquiries and issues

· Conduct machine acceptance with customer

· Co-ordination with sub-contractors for machine build

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

REQUIREMENT

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

· Able to work independently and within schedule

Geekplus is a global leader in mobile robotics technologies, providing innovative solutions for order fulfillment. With over 1,000 industry leaders using our systems, we deliver flexible, reliable, and efficient automation for warehouses and supply chains. Founded in 2015, Geekplus has more than 1,500 employees and offices worldwide, including in the US, Germany, the UK, Japan, South Korea, Mainland China, Hong Kong SAR, and Singapore.

------------------------------

We are looking for a Service Engineer to join our team. Are you someone who is driven by curiosity and craves a good challenge? Join us and be part of this exciting adventure!

What you have to do

• Serve as the site supervisor, overseeing and conducting relevant site activities during project implementation in the APAC region
• Collaborate closely with project managers, contractors, and suppliers to manage overall site performance
• Prepare daily on-site logs and records for customer and internal team reviews
• During the service phase, conduct preventive maintenance and perform root cause analysis of production issues using diagnostic tools
• Prepare a training manual and provide training and support to customers and other external parties

What you need to have

• A bachelor's degree in mechanical engineering or related disciplines
• Solid experience in equipment/hardware installation, maintenance, and site supervision
• Knowledge of Warehouse Management Systems, or other related logistics systems
• Proficiency in AutoCAD and Microsoft Office
• Good IT skills, including knowledge of network infrastructure, is a plus
• Frequent travel is required

------------------------------

What we offer

• Young and energetic work culture
• Opportunities for global mobility
• Double pay plus attractive performance bonuses
• Medical and dental coverage
• 14 to 21 days of annual leave
• Cozy office environment with refreshments
• Location: Tampines Plaza

If your qualifications, experience, and aspirations match our requirements, please send your resume with your current and expected salary to us. All information and materials submitted to Geek+ will remain strictly confidential and be treated for recruitment purposes only. Only short-listed candidates will be notified.

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS
• Diagnosing end-user system failures and implement repair solutions.
• Diagnosing printer and other peripheral devise failures and implement repair solutions.
• Troubleshooting network devices in order to ensure connectivity from the PC to the Network.
• Providing installation and upgrading services of hardware and software.
• Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs.
• Setup and troubleshooting audio/video equipment such as projectors and video conference equipment

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 1-1.5 years of relevant working experiences.
• Knowledge of multiple manufacturers and operating systems.
• Excellent troubleshooting capability.
• Using established procedures and working under immediate supervision, performs assigned tasks.
• Work is routine and instructions are usually detailed.
• Resolves routine questions and problems and refers more complex issues to higher levels.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Research Engineer will be involved in developing computer models for assessing climate change impacts on marine ecosystems. He/she will also be involved in collecting field data for calibrating and validating model systems. In addition to the above, the Research Engineer is expected to also participate actively in research meetings, present research findings, write reports and research papers.

Job Requirements

• Possess at least a good Bachelor’s degree in Civil and/or Environmental Engineering or equivalent.
• Experience in computational modelling in environmental engineering or climate change is preferred.
• Open to fixed term contract

Duties and responsibilities:

Planning and organizing construction projects, including developing project timelines, budgets, and resource plans.

Ensuring that all construction work is carried out in compliance with building codes, safety regulations, and other legal requirements.

Managing project teams, including architects, contractors, and other stakeholders, to ensure that projects are completed on time and within budget.

Monitoring project progress and making adjustments as necessary to ensure that projects are completed on time and within budget.

Collaborating with architects and other stakeholders to develop project plans and specifications.

Developing and implementing quality control procedures to ensure that construction work meets the required quality standards.

Providing technical guidance and support to project teams, including architects, contractors, and other stakeholders.

Maintaining accurate project records and documentation.

Develop and manage project schedules, budgets, and resources

Coordinate with architects, engineers, and contractors to ensure project success

Review and approve project plans, specifications, and contracts

Ensure compliance with building codes, safety regulations, and environmental requirements

Monitor project progress and make adjustments as necessary

Communicate project status to stakeholders and senior management

Manage project risks and identify opportunities for improvement

Provide technical support to project team members

Ensure quality control and quality assurance for all project deliverables

Lead project meetings and facilitate communication among team members

Assist in the development of cost estimates

Assist the project team with site safety documentation and coordination

Assist the project team with closeout of the project

Assist project accountant with monthly subcontractor billings and pay applications

Assist project manager with assigned tasks

Requirement:

Bachelor's degree in Civil Engineering or related field

Minimum of 5 years of experience in construction project management

Strong knowledge of construction materials, methods, and regulations

Excellent communication and leadership skills

Ability to manage multiple projects simultaneously

Proficiency in project management software and tools

Experience in managing large-scale construction projects

Ability to read and interpret blueprints and construction plans

Knowledge of budgeting and financial management

Experience in managing and supervising construction teams

Strong problem-solving and decision-making skills

You’ll get to:

• As a Quality Engineer, you have the opportunity to accelerate the delivery and to improve the quality of the software we build through recommending and implementing automated test suites.
• Work with vendors, government agencies and teams to identify end-to-end test scenarios as well as to automate these test scenarios, applying risk-based strategy to minimize manual interventions.
• Analyse and decompose complicated software systems and design a strategy to test these systems.
• Review Quality Assurance Plan and Test Strategy to provide timely and meaningful feedback.
• Ensure all required testing documentations are in place as part of production preparation checks.
• Drive and advocate continuous improvement in testing practices and tools.
• Conduct research on emerging test automation technologies that can optimize and accelerate the project delivery.

What you’ll bring to the team:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines
• Minimum 5 years' experience in application exploratory testing and regression test automation, application performance testing, and/or application security testing. Hands-on experience in automating various types of tests such as unit tests, API tests, Integration Tests, UI Tests, and End-to-end Tests.
• Create and support test automation strategies and implementations
• Knowledge of test best practices, test methodologies and their corresponding tools.
• Must have strong troubleshooting and debugging skills
• Meticulous attention to details
• Strong analytical, interpersonal and presentation skills
• Keen to share knowledge with team mates
• Curious, open to new ideas
• Quick to learn new skills
• Proactive, self-driven and motivated

Bonus points for:

• ISTQB, CSQA, CSTP or other relevant certification
• Excellent verbal communication and listening skills
• Experience in agile development environment will be an added advantage
• Experience in DevOps will be an added advantage
• Experience in Performance testing will be an added advantage

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Industrial Engineer to be part of our Industrial Engineer Department diverse team of talent.

What you will be working on:

• Maintain and improve capacity planning methodologies to ensure accuracy
• To achieve planned mix & capacity through equipment utilization improvement/conversion/other capacity improvement plans to ensure the plans meet operations goals
• Establish layout plans for all production equipment based on operation needs
• Ensure timely equipment installation/release for production to meet operation’s needs
• Initiate Tool-to-Tool Matching (Golden/Lemon) as well as Best-In-Class benchmarking to strie for the best perforamnce of the tools
• Update/maintain tool capacity/productivity database for capacity planning & productivity indices tracking
• Manage capital budget to reflect necessary equipment requirement for capacity mix and new technology introduction
• Establish standard costing methodologies & wkly/qtly/annual standard costing
• Cost management (forecast/tracking/improvement/modeling/analysis/benchmarking)
• People productivity management/coordination
• Initiate/lead/drive continuous improvement projects & Best-Known-Method sharing
• Strategic planning initiatives for capacity expansion, tool/people productivity improvement & cost reduction
• Lead/coordinate people productivity/automation initiatives. Headcount modelling
• Business Continuity Management and Risk assessment
• Enhance current systems, improve methodology & modelling
• Coach/mentor & train new Engineers/Associate Engineers

More about you:

• Degree in Industrial Engineering/ Mechanical/ Manufacturing
• Functional / Technical skills and knowledge: Knowledge in semiconductor processes and IE tools used in the semiconductor industry
• Computer skills : MS Office, MS Access, VBA, SQL, Oracle, Cognos, AutoCAD
• Strong communication and presentation skills
• Team player with strong problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.