Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Chemical and Biomolecular Engineering, National University of Singapore, is inviting applications for 1 Research Engineer (RE) position under Associate Professor Sibudjing Kawi’s group. The candidate will work on Shell research project entitled “Integrated Catalytic Plasma and Membrane Design for Low-Temperature High-Value Olefins Production from Light Hydrocarbons”.

Qualifications

Master degree in chemistry/chemical engineering in the area of catalysts, inorganic membranes and inorganic membrane reactors for high temperature reactions.
• Proven experience (with good research track record in terms of publications and/or patents) in the field of inorganic hollow fiber membrane synthesis, catalyst synthesis/characterization/testing for hydrocarbon pyrolysis and catalytic membrane reactor design.
• Strong team player skills and the ability to work harmoniously with a diverse workforce.

Job Summary:

• Provide 1st and 2nd Level IT Support to end-users
• Manage IT assets through procurement, tracking, maintenance, refresh /renewal and disposal/ termination.
• Provide assistance in the implementation of new end-user computing technologies.

Job Scope:

• Design, deploy, and manage security solutions such as firewalls, IDS/IPS, and encryption technologies.
• Conduct security audits, compliance checks such as vulnerability assessments with risk analysis
• Development and enforcement of security policies, procedures and controls
• Integrate security measures into new and existing IT systems and applications.
• Ensure that applications are securely configured, including hardening default settings, securing APIs, and restricting file permissions.
• Conduct initial investigations of security violations/incidents, and escalate as necessary
• Collaborate with other IT teams to ensure security is integrated across all systems and processes.
• Stay updated on the latest security trends & technologies
• Design, deploy, and manage security solutions such as firewalls, IDS/IPS, and encryption technologies.
• Work with other contractors where required for delivery of network services
• Any other IT duties as assigned.

Special Aptitude And Knowledge

• Advanced technical knowledge of security technologies and systems.
• Expertise in firewall administration, encryption technologies, and network protocols.
• Experience in designing and implementing security architectures.
• Proficiency in vulnerability assessment tools and penetration testing methodologies.
• Able to communicate well, handle documentation and explaining network and IT architecture
• A great team player and able to work well with other team member

Qualification

• Recognized Degree in Information Technology, Computer/ Network Engineering or equivalent.
• Possess relevant certifications such as CISSP, CCSP, CEH, or advanced security certifications
• Minimum 5 years of experience in an equivalent role.
• Experience with a company that has achieved CyberTrust Mark certification or has actively worked towards it is a bonus.
• Familiarity with implementing security measures in the healthcare industry is also advantageous.

Product area

In gTech Users and Products (gUP), our mission is to advocate for Google’s users by creating helpful and trusted experiences across the product ecosystem. We achieve this by meeting partners and consumers where they are with support and help, representing their needs with our product partners and proposing fixes and features that elevate their engagement with Google's diverse product ecosystem. Additionally we provide a range of product services that ensure our products are optimized for every user, no matter where they are in the world (e.g., localization, digitization, partner integration and more).

Job description

gTech’s Professional Services team takes a creative, collaborative, and customer-centric approach to provide foundational services and forward-looking business solutions to top advertiser and publisher customers. Through technical implementation, optimization, and key solutions, gTech Professional Services helps customers attain their business goals while building long-term capabilities.

Additional job description

In this role, you will be responsible for the technical relationship of our Distribution partners. You will collaborate with teams in Engineering, Business, and Product Management to use technologies for our internal or external clients/partners. From concept design and testing to data analysis and support, you will own the technical execution and work with business operations to distribute products such as Chrome, Lens, Android apps, and more. You will balance business and partner needs with technical constraints, develop innovative, solutions, and serve as a partner and consultant. You will also build tools and automate processes, oversee the technical execution and business operations of our products, as well as develop product strategy and prioritize projects and resources.

Qualifications

Job responsibilities

• Work with our Product, Engineering, and Partnership teams. Develop solutions, provide consulting services to our partners, build relationships, and know the partner's needs.
• Help partners in their day-to-day challenges by being the subject matter expert, delivering solutions, and troubleshooting their technical issues.
• Propose, design, create, and present proof-of-concept prototypes and demos to a variety of audiences, from engineers to marketing professionals.
• Perform implementation reviews. Advocate for new product features, and provide partner feedback to internal cross-functional teams including Product Management and Engineering.
• Deliver business intelligence. Use internal and external data sources to provide data insights to support decision making.

Minimum qualifications

• Bachelor’s degree in Engineering, Computer Science, a related field, or equivalent practical experience.
• 3 years of experience working with client-side web technologies (e.g., HTML, CSS, JavaScript, or HTTP).
• 3 years of experience coding with one or more programming languages (e.g., Java, C/C++, Python).
• Experience in technical troubleshooting, and managing internal/external partners or customers.

Preferred qualifications

• Master’s degree in Engineering, Computer Science, Business, or a related field.
• 5 years of experience in business intelligence, data analytics, or statistics.
• 5 years of experience working with systems (e.g. Linux, Unix).
• Excellent project management skills and attention to detail.
• Excellent problem-solving and troubleshooting skills.
• Ability to present to the technical level audience.

Product area

Google's network provides services to millions of Internet users around the world. Our metros are on the edge of our network where Google connects to its users. The Network Team is responsible for operating that network reliably and at scale. Our team owns the full life cycle of all space, power, and network assets in all of Google’s data centers and metro points of presence globally. From the foundation, we are involved from site acquisition to construction and are accountable for what space and power is delivered. We're involved in every facet of network delivery from architecture and design to installation, configuration, activation, and commissioning.

Job description

As a Network Implementation Engineer, you will be the initial point of our efforts to execute deployment, maintenance, and operations of private data networks worldwide. You will work with Technical Program Managers, Network Engineers, Design and Infrastructure Engineers, Field Engineers within Google, as well as construction and telecommunications vendors and contractors, all to position your team and organization for success.

You will facilitate faster, better, and more efficient, positive outcomes for the business and our customers. Your objective will be to build the world’s most reliable, cost-effective and scalable network to support all of our current and future customers and users globally.

Qualifications

Job responsibilities

• Build and operate Google's network reliably and at scale.
• Primary focus will be delivering Infrastructure capacity for APAC region.
• Responsibilities include design, planning, and installation support for optical transport.
• Beyond day-to-day responsibilities, you'll also work with more senior engineers to develop creative approaches for keeping operational costs low through tooling and process improvements.

Minimum qualifications

• Bachelor's degree in Network Engineering or Telecom Engineering, a related technical field, or equivalent practical experience.
• 3 years of experience in Dense Wavelength Division Multiplexing (DWDM) or Transmission Control Protocol/Internet Protocol (TCP/IP) or system design operations methodology.

Preferred qualifications

• Experience in Troubleshooting of DWDM systems and topology and architecture.
• Knowledge of fiber types and their application; physical fiber characteristics; and standard testing tools Optical Spectrum Analyzer (OSA), Bit Error Rate Test (BERT), Optical Time Domain Reflectometer (OTDR).
• Understanding of networking and fundamentals of network troubleshooting at Layer1.
• Understanding of network transport design, equipment and infrastructure.
• Excellent written and verbal communication skills.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Candidates with no prior working experience are welcome to apply.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design.
• Min. 5 years of experience in CMOS Analog IC design and simulation.
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent).
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Design power supply hardware (and/or embedded firmware) for various switching mode power converters (PFC, Flyback, Forward, Buck, Boost, Resonant topologies including LLC, series resonant, and Synchronous Rectification), ranging from 1,000W to 22,000W, for on-board/off-board charger.
• Theoretical analysis of concepts (calculation and simulation).
• Practical and detailed evaluation of all types of power circuits.
• Enhance and improve circuit performances such as Efficiency and Reliability.
• System design with creation 2D models and design 3D together with ME team.
• Schematic creation and PCB design support.
• As project key person to start from concept to mass production stage.
• Implement design for manufacturing and design for automation. DFx.
• Patent and technology creation, defining new power requirements.

Key Requirements:

• BSc, MSc, PhD, or researcher with Min. 5 years’ experience.
• Experience with EV chargers and onboard chargers (OBC) is a plus.
• Familiar with power measurement equipment.
• With solid technical know-how on the transformer, power Mosfet, PWM controller, and synchronous rectifier circuits.
• Understand the application of PID controllers and control loop analysis.
• Knowledge of EMC/IEC/UL/EN standards.
• Experience in schematic and PCB layout designs.

SALARY:

Junior - ($4,200-$5,000)

Senior - ($5,000-$6,000)

LOCATION:

Ang Mo Kio / Yio Chu Kang / Central

Job Description

•Manage & Lead the electrical team.

•Perform engineering duties such as design, engineering calculations, planning, tender.

Preparation/evaluations as part of the engineering project team

•Team development

•QA/QC documentation review of engineering deliverables

•Liaison with clients, project managers, architects, contractors

•Resolve any technical problems faced during project design and/or construction stages

•Suggests ways to increase revenues and efficiency.

•Testing & Commissioning of the ACMV Electrical Systems.

•Ensure the team follows all electrical codes and standards.

Job Requirements

•Any qualification in a relevant engineering field with minimum 5 years of related working experience

in the Construction Electrical Field associated with ACMV / Electrical.

•Engineering design of commercial buildings, major infrastructure transportation projects and

mixed-use developments

•Possess design experience and good understanding of ACMV / Electrical technical systems and

procedures:

•Possess knowledge on all cabling, loading and sizing calculations and equipment selections such as

cable, generators, panels, etc.

•Develop, design through establishing, design briefs, design reports, calculations, schematics,

schedules, specifications, concept, Preliminary, Detailed and Construction Engineering Designs

•Productions of drawings and developing models

•Site Experience, Testing & Commissioning Experience

•Having experience working with Infrastructure Projects would be an added advantage.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

EA Personnel.: Chan Jun Wei

EA Registered no.: R1543992

Recruit Now Singapore Pte Ltd

EA License no.: 21C0845

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. cynapse’s software platform is leveraging cutting-edge cloud/on-premise/edge platforms, advanced computer vision algorithms, advanced ML concepts & models, and more.

The company Headquarter is located in Singapore (one-north Area)

Job Description

Cynapse is looking for a talented and highly motivated Computer Vision & Machine Learning Developer to join our AI team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of design and coding, working in a cutting-edge, dynamic and professionally challenging environment.

Responsibilities

• Assist in the development and training of computer vision models using state-of-the-art machine learning techniques.
• Work with large datasets for model training.
• Collaborate with engineers to implement and fine-tune models, focusing on performance, accuracy, and scalability.
• Contribute to the deployment and monitoring of trained models in production environments, ensuring robustness and reliability.
• Participate in the development and maintenance of MLOps pipelines, automating the process of model training, deployment, and monitoring.
• Conduct research to explore and implement the latest computer vision and MLOps techniques and technologies.
• Maintain and update model pipelines, ensuring they meet project requirements and deadlines.

Qualifications

• Bachelor’s degree in Computer Science, Data Science, Artificial intelligence, Mathematic, Electrical Engineering, or a related field.
• Solid understanding of machine learning concepts, particularly neural networks and their applications in computer vision (e.g., convolutional neural networks, transfer learning, and deep learning architectures).
• Proficient in one or more popular machine learning frameworks such as TensorFlow, PyTorch, or similar.
• Experienced with computer vision libraries like OpenCV, scikit-image, or equivalent.
• Strong programming skills in Python, with expertise in using tools like NumPy, Pandas, and Matplotlib for data manipulation and visualization.
• Knowledge of data preprocessing techniques, including image augmentation, normalization, and resizing.
• Basic understanding of MLOps practices, including version control, continuous integration, and continuous deployment (CI/CD).
• Strong analytical and problem-solving skills with attention to detail.
• Good communication skills, both written and verbal, with the ability to work collaboratively in a team environment.
• Eagerness to learn and adapt to new tools and technologies in the rapidly evolving fields of machine learning, computer vision, and MLOps.
• (Optional) Experience with cloud platforms like AWS, GCP, or Azure is a plus.
• (Optional) Knowledge of Docker or other containerization tools for model deployment.
• (Optional) Familiarity with MLOps tools like MLflow, Kubeflow, or similar is a plus.

Personal Competencies

• Innovative, motivated and a quick learner
• Ability to work well in a small team and take end-to-end ownership of problems and their resolution
• Attention to detail, curiosity, and passion for technology

Benefits

• Competitive base salary and a generous stock option package
• Unique opportunity to work with a talented global team on cutting edge technologies
• informal and exciting work environment with flexible hours

Due to the nature of the role, the position is considered for candidates that are only based in Singapore

Job Type: Full-time

Benefits:

• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary

Work Location: In person

Responsibilities

• Responsible for internal and external excursion management (MRB or Quality Claims)
• In-charge of customer data reporting
• Conduct quality related training
• Support customer survey and audits
• Responsible for continuous improvement activities
• Other Adhoc duties assigned

Requirements

• Degree in Engineering or Science
• Min. 2 years relevant working experience is required
• Systematic and analytical problem-solving skills
• Proactive and Multi-tasking
• Good communication skills and a good team player
• Proficient in Microsoft Office
• Good working knowledge in Statistical Process Control (SPC) and Statistical techniques is preferably
• Auditing experience is an added advantage
• Understanding of system flow and database is an added advantage

Job Description

· Collaborate with cross-functional teams such as Mechanical Engineers, Test Engineers, Lab Technicians, and Project Engineers to execute ocean basin model testing projects, such as floating offshore wind projects.

· Analyse and comprehend project requirements related to hydrodynamic testing, model instrumentation, and data acquisition.

· Select and implement suitable data acquisition systems, control system design, and develop software architecture specific to ocean model testing needs.

· Develop and maintain application software for new ocean basin test setups and custom test requirements.

· Upgrade existing software systems to accommodate new test protocols or methodologies for ocean model testing.

· Choose appropriate sensors for wave, current, and motion measurements, ensuring seamless integration with control systems and software.

· Create and update documentation, including software designs, changes, user manuals, and standard operating procedures (SOPs) for ocean model tests.

· Upgrade LabVIEW-based software applications to newer versions, ensuring they meet the latest testing requirements.

· Troubleshoot and resolve issues in control systems, data acquisition, and software during model testing.

· Test and validate application software before deployment to the ocean basin test setup.

· Prepare comprehensive user manuals, SOPs, and provide training for test engineers to ensure smooth operation of the test environment.

Job Requirements

· Minimum qualification: Bachelor of Engineering (BEng) / Bachelor of Technology (BTech) in Electronics, Electrical, Instrumentation, or Computer Science with at least 2 years of relevant experience, particularly in LabVIEW.

· Proficiency in different versions of LabVIEW, including the latest versions with relevant toolkits.

· Experience in designing and developing NI LabVIEW-based data acquisition and control systems for ocean basin model testing or similar environments.

· Proven ability to develop modular and scalable applications using LabVIEW?s standard architecture.

· Experience in developing LabVIEW applications for Windows and Real-Time (RT) Linux environments.

· Proficiency in integrating NI hardware systems such as PXI, cRIO, and CompactDAQ into the testing framework.

· Hands-on experience with communication protocols like TCP/IP, UDP, Serial, USB, CAN, and EtherCAT for testing and control purposes.

· Experience with integrating third-party programmable instruments (e.g., multimeters, power supplies, oscilloscopes) and controllers into ocean testing setups.

· Experience in developing NI software drivers for third-party hardware and integrating third-party software with LabVIEW.

· Knowledge in selecting, wiring, and troubleshooting sensors used in hydrodynamic and ocean model testing (e.g., pressure sensors, accelerometers, flow meters).

· Experience in reading control panel schematics, designing control systems, and selecting appropriate control panel hardware for model testing.

· Strong team player with the ability to work independently and collaborate in cross-functional project teams.

· Experience interfacing induction motors with VFDs and control systems, with knowledge of VFD configuration for use in testing environments.

· Strong troubleshooting skills at the signal and system level for data acquisition and automated test systems.

· Excellent documentation skills for capturing test requirements, preparing software designs, and writing user manuals.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing, Deskside support and Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 2 End User Computing support and well verse in Windows OS.
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment.
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Familiar with Service Desk ticketing systems and process.
• VIP support.
• Change Management, including review new and implemented changes, chair CAB, review change schedule, maintain dashboard, prepare comms.
• Incident Management, including analysing trends, incident workarounds, monitoring aged incidents.
• Major Incident Management, including communication, being part of the Incident Response Team, managing suppliers
• Problem Management, including chairing any problem meetings, managing active problems, highlighting new problems.
• Release Management – liaising with the testers, vendor, tracking features and defects
• Service Request Management – documenting processes, analysing trends, identifying service improvements, working with teams to design new processes
• Continual Service Improvement – being able to highlight areas of improvement for effectiveness and efficiency
• Service Reporting
• ServiceNow – to assist with the day-to-day management of the tool, including working on incidents and requests

Technical Skills & Qualifications Required:

• Good knowledge of ITIL
• Good knowledge of ServiceNow
• Good knowledge/experience of using the Microsoft suite, specifically including SharePoint , Visio and Excel
• Exposure to/familiarity with automation

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences.
• A good team player.
• Excellent verbal and written communication skills, and ability to communicate with different audiences and write a range of document types – procedures, comms, training modules.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 3+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• Design and synthesis of organic functional materials with persistent luminescence
• Design and synthesis of organic functional materials for theranostic applications
• Design and synthesis of nanomaterials for theranostic applications
• Cellular and bacteria studies to evaluate fluorescent probes
• Responsible for conducting high quality research, writing academic papers and collaboration with other researchers

Job Requirements

• Bachelor degree in Chemistry, Materials, Polymers and Chemical Engineering.
• Good knowledge in synthesis and characterization.
• Have good publication record and relevant research experience.
• Highly motivated and independent, strong problem-solving skills
• Good written and spoken communication
• Open to fixed-term contract

Job Summary

• Provide 1st and 2nd Level IT Support to end-users
• Manage IT assets through procurement, tracking, maintenance, refresh/renewal and disposal/ termination.
• Provide assistance in the implementation of new end-user computing technologies

Responsibilities:

• Provide 1st and 2nd Level IT Support to end-users
• Provide end-user IT support for both local and remote locations daily toensure smooth business operation including end-user computing device performance monitoring
• Perform installation, configuration and maintenance of computers, workstations, applications and other related equipment and devices
• Perform IT asset lifecycle management including tech refresh, preventive maintenance (Eg. Laptops / Printers ) and software license monitoring
• Responsible for the procurement of IT equipment, software and relatedproducts including administering procurement processes and supporting in requirements scoping and evaluation
• Manage IT vendors (service quality, feedback, improvements) and service contracts
• Provide assistance in the implementation of new end-user computing technologies
• Any other IT duties as assigned

Requirements:

• Recognized Diploma or Degree in Information Technology or equivalent
• Minimum 3 years of experience in providing IT support to end- user community
• Has a passion or keen interest in Healthcare or Community Services
• Strong in tracking on-hand tasks and see through to completion
• Experienced in troubleshooting IT issues at L1/L2 support levels and escalating to higher levels of IT support
• A great team player and able to work well with other team members
• Able to communicate well and maintain documentation

• Position : Site Engineer - Up to $4,200 - Seletar
• Location : Seletar
• Working hours : 5 Days Work Week – Monday to Friday: 8.30AM to 6.00PM
• Salary (commensurate with experience): Up to $4,200 + Performance Bonus + 14 Days Annual Leave
• Duration : Permanent
• Industry : Aerospace

Responsibilities:

• Create solutions to complex technical problems in life science, Power, water treatment, chemical and petro-chemical, shipyard and oil and gas plants.
• Do field/ bench Calibration of measuring instruments like Pressure, Temperature, Flow, radar level, analyzer, wireless and collect data
• Calculate calibration range, mA, Freq, required output and accuracy before doing calibration and record the result during calibration
• Analyze and compile technical and statistical information and prepare report
• Maintain accurate engineering documents

Requirements:

• Minimum Diploma in Electrical / Electronic / Instrumentation
• Minimum 3 years of relevant experience in the same field
• Knowledge relating to Mechanical and Measuring Instruments
• Technical report writing and able to read the schematic diagrams
• Preferably with Class 3 Driving License
• Bilingual in English & Mandarin to liaise with Chinese associates who can only speak mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Key Responsibilities:

• Design power supply hardware (and/or embedded firmware) for various switching mode power converters (PFC, Flyback, Forward, Buck, Boost, Resonant topologies including LLC, series resonant, and Synchronous Rectification), ranging from 1,000W to 22,000W, for on-board/off-board charger.
• Theoretical analysis of concepts (calculation and simulation).
• Practical and detailed evaluation of all types of power circuits.
• Enhance and improve circuit performances such as Efficiency and Reliability.
• System design with creation 2D models and design 3D together with ME team.
• Schematic creation and PCB design support.
• As project key person to start from concept to mass production stage.
• Implement design for manufacturing and design for automation. DFx.
• Patent and technology creation, defining new power requirements.

Key Requirements:

• BSc, MSc, PhD, or researcher with Min. 3 years’ experience.
• Experience with EV chargers and onboard chargers (OBC) is a plus.
• Familiar with power measurement equipment.
• With solid technical know-how on the transformer, power Mosfet, PWM controller, and synchronous rectifier circuits.
• Understand the application of PID controllers and control loop analysis.
• Knowledge of EMC/IEC/UL/EN standards.
• Experience in schematic and PCB layout designs.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Degree or diploma in Civil Engineering or project management.

Please email your CV to: [email protected]

Our business:

Professional Engineer (PE Civil)

1. PE endorsement for any temp works

2. PE endorsement for wall hacking, submission to HDB/MCST;

3. Building structure crack/safety assessment

4. Scaffolding/shoring/formwork design

5. ECM design and submission to PUB / QECP inspection to site

6. A&A work design and submission to URA/BCA/HDB/LTA/JTC

7. SCDF submission for shop / factory partition works

8. LTA prompt submission for road opening;

9. PUB POWS submission

10. PUB Form B1 endorsement for sewer connection

11. SCDF FSC02 form endorsement.

12. HDB SED 054M form endorsement.

13. Project management

14. Design for Safety (DfSP) Services

15. Building structural inspection (PSI) to BCA requirements

16. Façade inspection to BCA requirements

17. Earth returning structure design and submission (ERSS)

M & E Work (PE Mechanical)

18. Design and PE endorsement to piping / ducting support

19. Design and PE endorsement to piping trenching excavation work

20. Endorsement to FSC02 form

21. Mechanical PE work

Geotechnical Consultancy

22. Deep Excavation

23. Slope Protection

24. Soil Improvement

25. Foundation Design

26. Soil Interpretation Report

Others

27. Land Survey

28. Pre-con survey

29. Technical clearance to Npark, PUB, LTA, JTC etc.

30. Traffic diversion design, LTA prompt submission

31. Design for Safety Professional (DfSP)

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

As a Senior Frontend (Full Stack) Engineer, you will be responsible for designing, developing, and maintaining our data product suite. You will work closely with cross-functional teams including data scientists, data engineers, and UX/UI developers to create scalable, robust, and user-friendly applications. Your expertise in both front-end and back-end development will be crucial in implementing innovative features and ensuring seamless integration between different components of our data products. This role requires strong problemsolving skills, a deep understanding of data processing and visualization techniques, and a passion for delivering high-quality software solutions.

Responsibilities

• Collaborate with product owner, data scientists, data engineers and designers to understand product requirements and translate them into technical specifications.
• Design and develop full-stack solutions, including user interfaces, APIs, data processing and storage.
• Implement data visualization components using modern front-end frameworks and libraries.
• Develop scalable and efficient back-end services to handle data from multiple data source with complex business logic.
• Optimize application performance and ensure high availability and reliability.
• Conduct code reviews, ensure seamless deployment and testing of the data products and provide constructive feedback.
• Stay updated with the latest industry trends and best practices in full-stack development, data engineering, and data visualization.
• Troubleshoot and resolve issues reported by users, ensuring a smooth user experience.
• Continuously improve software development processes and contribute to the overall technical excellence of the team

• Bachelor's or master's degree in Computer Science, Software Engineering, or a related field.
• 5+ years of professional experience as a Full Stack Engineer, with a focus on datadriven applications.
• Strong proficiency in JavaScript, HTML, CSS, and modern front-end frameworks (e.g., React is preferred as we use React in our team).
• Expertise in server-side programming languages such as Node.js, Python or Java.
• In-depth knowledge of databases and SQL, with experience in designing and optimizing data models.
• Familiarity with data processing frameworks (e.g., Apache Spark) and big data technologies (e.g., Kafka) is a plus.
• Solid understanding of RESTful APIs and microservices architecture.
• Experience with cloud platforms (e.g., Azure, AWS) and containerization technologies (e.g., Docker, Kubernetes).
• Proficiency in version control systems (e.g., Git)
• Excellent problem-solving skills and the ability to debug complex issues in a distributed system.
• Strong communication skills and the ability to work effectively in a collaborative team environment.
• Prior experience working on data products or analytics platforms is highly desirable.

COMPANY DESCRIPTION

As the world's leading owner and operator of LPG carriers with five decades of operating experience, BW LPG promotes competitive, sustainable solutions to secure value for society and our stakeholders.

Our global footprint spans seven countries with 17 nationalities represented across our workforce. Our fleet of 39 Very Large Gas Carriers (VLGC) offer a total carrying capacity of over 3 million CBM. From spot voyages and time charters to Contracts of Affreightments (CoAs), our emphasis on flexible, reliable service has earned the trust of leading oil companies as well as trading and utility companies. More information about BW LPG can be found at www.bwlpg.com.

BW LPG is associated with BW Group, a leading global maritime company involved in shipping, floating infrastructure, deepwater oil & gas production, and new sustainable technologies. Founded in 1955 by Sir YK Pao, BW controls a fleet of over 490 vessels transporting oil, gas and dry commodities, with its 200 LNG and LPG ships constituting the largest gas fleet in the world. In the renewables space, the group has investments in solar, wind, batteries, biofuels and water treatment. BW LPG, as a member of the BW Group, is one of Forbes World's Best Employers 2023.

RESPONSIBILITIES

Summary:

The Senior Data Engineer has a role focusing on building our modern Lakehouse including owning pipeline development, data modeling and governance within a cross-functional team responsible for the end-to-end delivery of data products and analytics solutions.Additionally creating CI/CD pipelines for automated deployments and monitoring, and enforce data quality checks, ensuring data consistency, reliability, and compliance.

Key Responsibilities:

Working with Product Owners, Business Analysts and Data Analysts to ensure business requirements are translated into data solutions, deliver accurate and reliable datasets that enable impactful analytics and dashboards.

They collaborate with System Analysts and the Business to understand the business logic and data lifecycle within our systems and inform our solution design with a goal of balancing scalability and performance.

Skills:

• Collaboration and Communication Skills: Excels at working in a team to align data solutions with business needs, focused on creative problem-solving in a fast-paced environment.
• Analytical Thinking & Communication: Strong skills in analyzing and translating data-driven insights and requirements to both technical and non-technical stakeholders.
• Spark & Azure Databricks: Proficiency in designing and implementing data pipelines to support reliable data ingestion and transformation using Databricks and Spark.
• Data Modeling Expertise: Advanced SQL and Python skills for complex queries and data modeling, enabling efficient data access and transformation.
• CI/CD Pipeline Creation: Experience in creating CI/CD pipelines, enabling automated testing, validation, and deployment of data pipelines models using GitHub and GitHub Actions with Databricks.
• Infrastructure as Code: Experience in automating cloud infrastructure management for consistent deployment and scaling using tools like Terraform.

• 5+ Years in Data Engineering: Proven experience building and maintaining data infrastructure, with a deep understanding of data engineering principles and best practices.
• Agile Mindset and Experience: Thrives in Agile Environments, with a strong resilience, adaptability and responsiveness to change in fast-paced settings.

The position will be based in Singapore.

Only shortlisted candidates will be notified.

As a Cloud DevOps Engineer, you will run and support the company’s software application infrastructure in the cloud, ensuring the optimized use of resources to scale.

What will you do

• Design, develop, and implement cloud infrastructure as code using Terraform.
• Manage and optimize cloud resources for cost-efficiency and performance.
• Secure infrastructure by implementing best practices and adhering to security compliance standards.
• Implement robust monitoring and alerting systems for infrastructure resources.
• Collaborate with developers and operations teams to integrate infrastructure changes seamlessly into the software development lifecycle.
• Champion DevOps best practices for cloud infrastructure management.
• Setup, monitor and support CI/CD pipeline on premise or in the cloud.
• Stay up to date on the latest AWS services and Terraform features.

What do we expect

• Proven experience as a DevOps Engineer with at least 3 years of experience (with a focus on AWS cloud infrastructure).
• Implementation proficiency in service control policy and account governance (Control Tower, OU management, etc.).
• Enable and configure AWS VPC flow logs, load balancer logging, direct connect, AWS VPN, TGX etc.
• Experience managing Unix/Linux environments.
• Extensive experience in scripting in languages such as Python/Ruby/Perl and shell scripting.
• In-depth knowledge and experience with AWS services (EC2, S3, VPC, IAM, etc.).
• Expert-level proficiency in Terraform, including writing reusable modules and leveraging best practices.
• Able to troubleshoot infrastructure issues in cloud, identify root cause and implementation improvement and fixes.
• Good knowledge of microservices architecture, container technologies (Docker, Kubernetes).
• Expertise in Git and GitOps philosophy.
• Good people skills, teamwork, collaboration with cross function and cross-geo teams.
• Self-motivated, willing to learn new technologies continuously.
• Maintain documentation for design, integration, testing, and deployment.

Good to have

Relevant DevOps certifications (e.g. AWS).

Some experience with other cloud providers like Azure and GCP.

Experience with CI/CD pipelines and integrating infrastructure provisioning with development workflows.

Knowledge on mobile and web applications development.

Knowledge of big data and data analytics infrastructure in cloud.

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

As a Senior Frontend (Full Stack) Engineer, you will be responsible for designing, developing, and maintaining our data product suite. You will work closely with cross-functional teams including data scientists, data engineers, and UX/UI developers to create scalable, robust, and user-friendly applications. Your expertise in both front-end and back-end development will be crucial in implementing innovative features and ensuring seamless integration between different components of our data products. This role requires strong problemsolving skills, a deep understanding of data processing and visualization techniques, and a passion for delivering high-quality software solutions.

Responsibilities

• Collaborate with product owner, data scientists, data engineers and designers to understand product requirements and translate them into technical specifications.
• Design and develop full-stack solutions, including user interfaces, APIs, data processing and storage.
• Implement data visualization components using modern front-end frameworks and libraries.
• Develop scalable and efficient back-end services to handle data from multiple data source with complex business logic.
• Optimize application performance and ensure high availability and reliability.
• Conduct code reviews, ensure seamless deployment and testing of the data products and provide constructive feedback.
• Stay updated with the latest industry trends and best practices in full-stack development, data engineering, and data visualization.
• Troubleshoot and resolve issues reported by users, ensuring a smooth user experience.
• Continuously improve software development processes and contribute to the overall technical excellence of the team

• Bachelor's or master's degree in Computer Science, Software Engineering, or a related field.
• 5+ years of professional experience as a Full Stack Engineer, with a focus on datadriven applications.
• Strong proficiency in JavaScript, HTML, CSS, and modern front-end frameworks (e.g., React is preferred as we use React in our team).
• Expertise in server-side programming languages such as Node.js, Python or Java.
• In-depth knowledge of databases and SQL, with experience in designing and optimizing data models.
• Familiarity with data processing frameworks (e.g., Apache Spark) and big data technologies (e.g., Kafka) is a plus.
• Solid understanding of RESTful APIs and microservices architecture.
• Experience with cloud platforms (e.g., Azure, AWS) and containerization technologies (e.g., Docker, Kubernetes).
• Proficiency in version control systems (e.g., Git)
• Excellent problem-solving skills and the ability to debug complex issues in a distributed system.
• Strong communication skills and the ability to work effectively in a collaborative team environment.
• Prior experience working on data products or analytics platforms is highly desirable.