Duties to be Performed:

Senior Mechanical Engineer for HVAC Systems shall be handling on designing and delivering mechanical systems for industrial properties in semiconductors, electronics, biopharma, and related industries.

The mechanical systems include Cleanroom, HVAC, Process exhausts, vacuum, condenser, chilled water, process and process cooling water, fire protection, diesel fuel, natural gas and associated, equipment, ducts and pipe works.

The Duties/ Responsibilities of the Prospective Candidate are,

• Responsible for Engineering of Concept / Basic / Detail design for Mechanical systems with the focus of HVAC systems.
• Shall perform system related engineering calculation including heat load calculation, equipment sizing, distribution system sizing from fundamentals with spreadsheet tools.
• Shall develop design drawings including, but not limited to, PFD, Schematics and Layout for required HVAC systems.
• Engineering design of HVAC and Process Exhaust systems for new/ existing production buildings.
• Conduct feasibility study and conceptual design of Mechanical Systems throughout all technological aspects
• Review of HVAC system in preparation for testing and commissioning and validation
• Coordination and engineering in regards of R&D Equipment requirements
• Provision of engineering service for tendering, conduct site show round and brief bidders
• Develop a detailed project plan to monitor and track progress
• Create and maintain comprehensive project documentation
• Meet with clients to take detailed ordering briefs and clarify specific requirements of each project
• Coordinate internal resources and third parties/vendors for the flawless execution of projects
• Clearly define and align inter-discipline technical interfaces and scope demarcation
• Work with CAD drafters and BIM modeler to guide, check and carry out field verification with them.
• Prepare SOW (Scope of work) for bid package, including BOM for form of tender.
• Calculate system OSE (Operating System Efficiency) of chilled water system to meet MEES requirements.
• Frictional loss calculation for fan and pump head and estimation of power requirements.
• Perform psychrometric analysis on system design
• Trouble shooting of design and construction related problems and develop solutions accordingly
• To promote safe working practices and to protect the health and well-being of Employees, contractors and Customers.
• Liaising with QA / QC Engineers to ensure they are aligned with the requirements of the specification.
• Support during construction stage

Job / Skills Requirement:

• You should have a bachelor's degree in mechanical.
• You should have sound experience in mechanical systems in designing and installation works related to semiconductors, biopharma, laboratories, data centers, or process buildings.
• You should be familiar with both Singapore and Malaysia’s latest codes, standards, guidelines, regulations, and authorities requirements. Your familiarity with available equipment, modern technology, construction methods, and CAD/ BIM is an added advantage.
• You should be able to advise clients and engineers on project execution, supervising progress, and quality of work.
• Able to Travel/ Relocate

Job Position:- Senior Resident Engineer (C&S)

Time:- Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Degree in Civil or Structural Engineering or equivalent.
• Registered as Resident Engineer with BCA/IES/ACES.
• More than 10 years of relevant site supervision experience as a resident engineer.

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local building codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

We are looking for a talented and ambitious candidate to join our team in developing next-generation quantum sensors. The position will focus on modeling the dynamics and fabricating cryogenic components for the superconducting levitation of ferromagnetic particles.

This levitated, freely precessing particle forms a system of correlated spins, capable of rapidly averaging out quantum uncertainty. By harnessing this system, we aim to develop quantum sensors with sensitivities that exceed the standard quantum limit.

This position is based in the Quantum Innovation Centre (Q.Inc) and Institute of Materials Research and Engineering (IMRE). The successful candidate will contribute to a range of innovative activities, including:

Key Responsibilities:

• Modeling the dynamics of the levitated particle
• Microfabrication of the particle, silicon pocket, and superconducting materials
• Learning to operate a dilution refrigerator

Job Requirements:

• Bachelor's or master’s in physics, Applied Physics, Precise Instrumentation, or related fields
• Past experience in the job activities listed above is preferred, but a strong willingness to learn is sufficient. Trainings will be provided.
• Strong motivation for multidisciplinary research
• Prior experience in superconductivity and/or quantum sensing is highly preferred
• Basic programming skills (e.g., Python, MATLAB)
• Mechanical design
• Ability to work as a team and communicate effectively

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Project Engineer (Mechanical / Electrical Engineering)

We are currently seeking a highly organized and detail-oriented individual to join our team as a Project Engineer. In this role, you will be responsible for overseeing and managing various engineering projects from conception to completion. You will work closely with cross-functional teams to ensure projects are delivered on time, within budget, and meet the required standards.

As a Project Engineer, your role will involve analysing project requirements, developing project plans, conducting feasibility studies, and coordinating project resources. You will also be responsible for monitoring project progress, identifying potential issues, and implementing corrective actions when necessary. Additionally, you will collaborate with external stakeholders, such as clients and contractors, to ensure effective communication and successful project outcomes.

To excel in this position, you must possess strong project management skills, technical expertise, and excellent problem-solving abilities. You should be able to work well under pressure and manage multiple projects simultaneously. Exceptional communication and interpersonal skills are also essential for effectively collaborating with various stakeholders.

Responsibilities

• Develop and implement project plans based on project scope and objectives
• Conduct feasibility studies and perform risk assessments to ensure project viability
• Coordinate and allocate project resources, including personnel, materials, and equipment
• Monitor project progress and ensure adherence to timelines, budget, and quality standards
• Collaborate with cross-functional teams to identify and resolve project issues
• Conduct regular project meetings to provide updates, discuss challenges, and make decisions
• Prepare and present project reports, including status updates and performance metrics
• Maintain effective communication with clients, contractors, and other external stakeholders
• Good knowledge or certified in WSH.

Requirements

• Bachelor's degree in electrical/electronic/mechanical engineering with 2 years of experience
• Excellent communication and interpersonal skills, both verbal and written in English.
• Good skills in using MS Office application and AUTOCAD
• Proven experience in project management, preferably in an engineering or construction setting
• Strong knowledge of project management methodologies and tools
• Solid understanding of engineering principles and construction processes
• Exceptional problem-solving skills and the ability to think critically.
• Strong organizational and time management skills with the ability to prioritize tasks effectively.
• Ability to work well under pressure and meet tight deadlines.
• Detail-oriented and able to maintain a high level of accuracy in all work activities.
• Excellent team player with the ability to collaborate effectively with cross-functional teams.
• Professional certification in project management is a plus.
• Familiar with relevant WSH certification courses for commercial and industrial areas.

Position Summary / Project Description

Data Engineer for cloud migration projects (Primarily utilizing AWS, IDMC, Databricks and Tableau)

Role and Responsibilities

• Develop ETL (Extract, Transform, Load) processes to cleanse, transform, and enrich data, making it suitable for analytical purposes using Databricks' Spark capabilities and Informatica IDMC for data transformation and quality.

• Monitor and optimize data processing and query performance in both AWS and Databricks environments, making necessary adjustments to meet performance and scalability requirements. Utilize Informatica IDMC for optimizing data workflows.

• Implement security best practices and data encryption methods to protect sensitive data in both AWS and Databricks, while ensuring compliance with data privacy regulations. Employ Informatica IDMC for data governance and compliance.

• Implement automation for routine tasks, such as data ingestion, transformation, and monitoring, using AWS services like AWS Step Functions, AWS Lambda, Databricks Jobs, and Informatica IDMC for workflow automation.

• Maintain clear and comprehensive documentation of data infrastructure, pipelines, and configurations in both AWS and Databricks environments, with metadata management facilitated by Informatica IDMC.

• Collaborate with cross-functional teams, including data scientists, analysts, and software engineers, to understand data requirements and deliver appropriate solutions across AWS, Databricks, and Informatica IDMC.

• Identify and resolve data-related issues and provide support to ensure data availability and integrity in both AWS, Databricks, and Informatica IDMC environments.

• Optimize AWS, Databricks, and Informatica resource usage to control costs while meeting performance and scalability requirements.

• Stay up-to-date with AWS, Databricks, Informatica IDMC services, and data engineering best practices to recommend and implement new technologies and techniques.

Requirements / Qualifications

• Bachelor’s or master’s degree in computer science, data engineering, or a related field.

• Minimum 4 years of experience in data engineering, with expertise in AWS services, Databricks, and/or Informatica IDMC.

• Proficiency in programming languages such as Python, Java, or Scala for building data pipelines.

• Evaluate potential technical solutions and make recommendations to resolve data issues especially on performance assessment for complex data transformations and long running data processes.

• Strong knowledge of SQL and NoSQL databases.

• Familiarity with data modeling and schema design.

• Excellent problem-solving and analytical skills.

• Strong communication and collaboration skills.

• AWS certifications, Databricks certifications, and Informatica certifications are a plus.

Project Engineer (Electrical & Electronic)

As a Project Engineer, your role will involve analysing project requirements, developing project plans, conducting feasibility studies, and coordinating project resources. You will also be responsible for monitoring project progress, identifying potential issues, and implementing corrective actions when necessary. Additionally, you will collaborate with external stakeholders, such as clients and contractors, to ensure effective communication and successful project outcomes.

To excel in this position, you must possess strong project management skills, technical expertise, and excellent problem-solving abilities. You should be able to work well under pressure and manage multiple projects simultaneously. Exceptional communication and interpersonal skills are also essential for effectively collaborating with various stakeholders.

Responsibilities

• Develop and implement project plans based on project scope and objectives
• Conduct feasibility studies and perform risk assessments to ensure project viability
• Coordinate and allocate project resources, including personnel, materials, and equipment
• Monitor project progress and ensure adherence to timelines, budget, and quality standards
• Collaborate with cross-functional teams to identify and resolve project issues
• Conduct regular project meetings to provide updates, discuss challenges, and make decisions
• Prepare and present project reports, including status updates and performance metrics
• Maintain effective communication with clients, contractors, and other external stakeholders

Requirement

• Candidate must possess a Bachelor's Degree in Engineering (Electronic & Electrical).
• Familiar and experience in ISO certifications and WSH.
• Excellent communication and interpersonal skills, both verbal and written in English.
• Good skills in using MS Office application, AUTOCAD and SolidWorks.
• At least 2 years of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or Mechanical equivalent.
• Experience in handling both consultants and clients will be added advantage
• Strong working knowledge of relevant codes of practice, building regulations, and authority submission and approval procedures.
• Proficiency in engineering design software and analysis tools.
• Excellent communication, collaboration, and interpersonal skills.
• Ability to manage multiple tasks effectively and prioritise deadlines.

Position: Project Engineer (Civil and Structural)

Responsibilities:

· To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.

· Prepare method statements, design plans, and specifications.

· Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.

· Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.

· Determine project requirements and estimate resources such as manpower, materials and equipment.

· Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.

· Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.

· Other job duties as assigned.

Requirements:

• Candidate must possess a Bachelor's Degree in Engineering (Civil and Structural).
• Familiar and experience in ISO certifications and WSH.
• Excellent communication and interpersonal skills, both verbal and written in English.
• Good skills in using MS Office application, AUTOCAD and SolidWorks.
• At least 2 years of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or Mechanical equivalent.
• Experience in handling both consultants and clients will be added advantage
• Strong working knowledge of relevant codes of practice, building regulations, and authority submission and approval procedures.
• Proficiency in engineering design software and analysis tools.
• Excellent communication, collaboration, and interpersonal skills.
• Ability to manage multiple tasks effectively and prioritise deadlines.

Key responsibilities:

• Provide IT support operation on daily basis, include below activities:

- IT asset management (include the hardware and software) – manage all company IT asset with proper traceability record;

- Support HR on all employee on-board/off-board process including IT training;

- Provide all IT system setup and admin work; (file control, VPN setup and special software admin work support);

- IT Level 1 helpdesk support to all company staff include remote user from worldwide, it could be PC issue, office printer, phone system or network related issues;

- Troubleshooting AD/DC, Exchange server, File Server and Application server issues and provide a solution.

- Troubleshoot and configure the firewall, router and switch when issues arises.

- Escalate to 3rd party IT support vendor if issue couldn’t be fixed within same day, coordinate with IT support vendor resolve issues within TAT, document down for all IT issues and solutions in return document;

- Liaise with IT vendor management, include IT hardware/software quotation, costing, PR process and make proposal if any recommend system tools).

• System maintenance work on regular basis, include below activities:

- All System backup (File server backup, NAS storage backup, offline backup activity), verify all system backup files are working properly;

- Coordinate department head on storage Clean up include File server, SharePoint and NetApp;

- Monitor Server room temperature and humidity, and make sure all server related equipment (E.g.: UPS) are working under good condition;

- Pulse check all on server, router and firewall log and flag out all abnormal activities immediately;

- Regular update antivirus related tools and window related system patches.

• IT governance and direction:

- Maintain all IT related record (contract, agreement, software authorization, etc.) and regularly updates or renew on time;

- Keep updating and release new IT P&P (Policy & Procedure), BCP(Business Continuity Plan) and DRP(Disaster Recovery Plan);

- Working with finance and country IT support on IT budgeting yearly basis and review it quarterly;

- Assist external or internal auditor on IT compliance or ISO related audit;

- Evaluate vendor proposal and provide justification to management.

• IT related projects management (Ad Hoc or on-going) and provide weekly basis updates to management):

- IT project plan, budgeting and proposal;

- IT project deployment after project approved;

- IT project verification and provide necessary training to end user;

- IT project sign off and documentation.

Additional responsibilities:

• Any reasonable task assigned by management and deemed to be within the individual’s capabilities to ensure smooth running of the business.
• As this is an evolving business, ongoing change is an integral part of the position. Management will liaise with the individual on any fundamental change to work practices. The individual is required to embrace and adopt any change to working practices.

About SHOKZ

As the first bone conduction headset manufacturer in China, Shokz pioneered the foray into patented bone conduction technology and has built itself as a world-renowned headphone brand with its signature open-ear design. Utilising numerous patented acoustics and health technologies, Shokz aims to accelerate the development of their True Wireless Stereo (“TWS”) series, their bone-conduction hearing aid and health product line.

Job Description：

Here, we explore the art of interaction between circuits and human body together. From the collection, processing to transmission of physiological signals, we listen to the body‘s whispers; from the design of status monitoring modules to the analysis of human body composition and signal quality, we objectively record the changes. We are the front-end of signal processing, the foundation of function realization, and the determinant of product ceiling!

Job Scope：

1.Understand systematic knowledge training and advanced training projects.

2.Handle physiological signal processing, including chip selection and architecture design, gain and filtering scheme design, embedded development, board making, and testing.

3.Design multi-circuit functional modules and establish the connection between the designed signals and the human body.

Job Requirement:

1.Bachelor's degree or above, majoring in electronic engineering, microelectronics, automation control, electronic information, mechanical engineering, physics, etc., or having project experience in electronics, sensors, etc., with excellent academic performance and solid professional basic knowledge.

2.Skilled in using electronic design software, with a good foundation in analog and digital electronics.

3.Focused, with a curiosity to explore the nature of things and a pursuit of technological excellence.

4.Clear-minded, good at problem-solving, able to quickly track the world's latest scientific research results, and capable of stimulating innovation.

5.Candidates who have participated in electronic design competitions and won awards, and have experience in electronic or sensor-related projects are preferred.

Job Description & Requirements

1. Preparation of shop drawing

2. Preparation and submission of necessary document prior to start boring work

3. Supervise in confirmation of soil boring and rock caring. And submissio0n of pile length calculation (if required)

4. Co-ordination with main contractor and consultant’s representative.

5. Preparation and submission of bored pile installation record

6. Supervise and arrange the site team & progress thereafter report to project manager

7. Preparation of bored pile summary and submit to main contractor and HQ

8. Submission of as built pile penetration and eccentricity drawing

9. Receiving the time to time instruction of project manager

Summary:

• Basic salary up to $4000
• Variable bonus
• OT fees available
• 5 days work week
• 7.30am - 5.00pm
• Location: Jurong East
• Engineer / Assistant engineer with mechanical background are welcome

Key Responsibilities:

• Ensure manufacturing processes operated with minimize manufacturing costs
• Manage the processes improvement program based on best practices in the metal drum making industry
• Conduct employee performance reviews and work closely with the HR department for any staff grievances
• Maintain work safety practice as well as housekeeping in all areas
• Prepare process documentation such as work instruction, process specifications and assist on the quality plan
• Ensure the subordinates are trained and equipped with up-to-date knowledge and skills
• Assist HR in OT records as well as recruitment of production personnel
• Prepare reports, maintain up-to-date training manuals and make recommendations for operation improvement
• Other relevant ad-hoc duties

Key Requirements:

• Min 2 years of experience in manufacturing production
• Preferably with mechanical background
• Willing to work OT when needed
• Bilingual in English and Mandarin to communicate effectively with Mandarin speaking clients / stakeholders

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Summary:

Being a new entrant in Singapore's R&D landscape, Skywork AI Singapore is dedicated to pushing the boundaries of Artificial General Intelligence (AGI) through foundational research, with a particular focus on Foundation Model 2.0 and Agents. Foundation Model 2.0 encompasses various dimensions, including pioneering new foundation models and applications, optimizing training and inference acceleration, and conducting theoretical studies to enhance interpretability. The work on Agents delives into both virtual and physical agents, propelling us into the forefront of AGI development.

Skywork AI Singapore is partnering with universities in Singapore, to invite motivated candidates to enroll in a PhD program and work at Skywork AI Singapore. Successful candidates will become full-time employees of Skywork AI and should qualify to be admitted into the PhD Programme at one of the universities in Singapore.

Candidate's Expectation:

• Work with our research scientists to conduct groundbreaking research in the AGI field, focusing on Foundation Model 2.0 and Agents
• Collaborate closely with our interdisciplinary team to publish influential research findings in top-tiered conferences and journals, making a significant impact on the AGI community
• Embrace the entrepreneurial spirit and actively explore technology transfer opportunities into business products

Desirable Experience:

• Demontrate a strong interest in a career in computer science
• Keen to study and perform research in areas such as Artificial Intelligence, Computer Vision, Deep Learning, Game AI, Natural Language Processing, Reinforcement Learning, and Speech Recognition. (Preferably but not limited to)
• Proficiency in differentiable programming frameworks such as PyTorch, TensorFlow, and JAX
• Possessed Bachelor's or Master's Degree in Computer Science/Engineering, Statistics, Mathematics, Data science, or related fields is highly desirable
• Not a recipient of, or hold any other scholarship or other award of a monetary nature (Excluding bursary and financial aid);
• Must meet the postgraduate admission and academic requirements
• For existing PhD candidates, must be 2 years or less into the postgraduate program

IPP trainees will be able to enjoy the following benefits:

• A Monthly salary of SGD6,000, in addition to CPF (for citizens and PRs), Medical Insurance, and many employment perks
• Sponsorship of tuition fee for 4 years
• Conference and travel allowances
• Computing equipment and GPU resources

Apply:

Interested candidates may send the latest Curriculum Vitae, transcripts, motivation letter and publication list to [email protected] to explore this exciting opportunity. Kindly indicate in your motivation letter, the University and intake that you have applied to e.g. NUS August 2025 intake.

We are committed to fostering diversity and welcome candidates from all backgrounds to apply. Join us in shaping the future of AGI at Kunlun-2050 Research Lab.

Roles and Responsibilities

Cluster Setup and Maintenance:

• Install, configure, and maintain big data platforms like Hadoop Clusters, Elastic Search, Spark, Kafka, Hive etc.
• Set up and manage distributed file systems (HDFS) and NoSQL databases (HBase, Cassandra).
• Ensuring high availability and reliability of Hadoop, Kafka and Elasticsearch Clusters.

Performance Optimization:

• Monitor system performance, fine-tune jobs, and optimize cluster utilization.
• Manage and resolve performance bottlenecks in big data environments.

Security Management:

• Implement data security policies, user authentication (Kerberos), and access control (Ranger, Knox).
• Regularly review and plan patch systems to ensure data integrity.
• Apply updates, patches, and version upgrades to all managed systems.
• Ensuring the backward compatibility and minimal downtime during upgrades.

Backup and Recovery:

• Plan and implement backup and recovery strategies for big data environments.
• Develop disaster recovery solutions and test failover scenarios.

Workflow Automation:

• Design and implement workflows using tools like Apache Oozie or Apache Airflow.
• Automate cluster management tasks like upgrades and scaling.
• Developing shell scripts and Ansible Playbooks to automate routine tasks, including monitoring, backups, and deployments.

Monitoring and Support:

• Monitor logs, metrics, and system health using tools like Ambari, Cloudera Manager, or Prometheus.
• Provide 24/7 on-call support for production systems and resolve incidents.

Collaboration:

• Work closely with data engineers and developers to support ETL pipelines and data processing jobs.
• Collaborate with stakeholders to ensure big data systems meet organizational needs.
• Working transversally with other teams to guarantee high data quality and availability.

Cloud migration

• Migration planning from On-premises to GCP & AWS cloud

Required Skills and Qualifications

Technical Skills:

• Strong knowledge of big data ecosystems (Hadoop, HDFS, YARN, Hive, HBase, Spark, Kafka and Elastic Search).
• Proficiency in Linux/Unix system administration.
• Experience with monitoring tools like Nagios, Grafana, or Splunk, HPOMI.
• Scripting skills in Python, Ansible, Shell, or Bash.
• Familiarity with cloud platforms (AWS, Azure, GCP) and their big data services.

Soft Skills:

• Strong problem-solving and analytical abilities.
• Effective communication and collaboration skills.
• Ability to handle high-pressure production environments.

Preferred Experience

• 8-9 years of experience in big data administration or similar roles.
• Hands-on experience in scaling and managing large, big data clusters in production environments.

Interested applicants please send your resume in MS Word format and attention it to Tan Joanna (R1104661)

Shortlisted candidates will be notified

Data provided is for recruitment purposes only

www.ambition.com.sg

EA Registration Number: R1104661

Business Registration Number: 200611680D. Licence Number: 10C5117

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible and focus on improving tool performance and availability, in charge of maintenance, diagnosing failures and implementing effective solutions to meet uptime and cycle time requirements in the Wet Etch module.

Key Responsibilities

• Maintain equipment performance in cleanroom environment for quality production.
• Handle on-duty tasks and conduct fundamental alarm troubleshooting; identify root cause and problem-solve critical equipment issues with urgency
• Install and qualify new tool sets on schedule to increase capacity promptly
• Continually improve tool uptime availability, drive defect reduction and enhance hardware capability
• Develop defense and monitoring system to prevent equipment failure or performance lost.
• Analyze complex data sets and derive actionable insights to optimize equipment parameters and controls
• Actively collaborate with equipment suppliers and partners to identify tool deficiencies; develop, evaluate, and validate corrective and preventive solutions

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Minimum of 2 years of experience as a Wet Etch equipment engineer, possessing in-depth knowledge. Experience working in a 12” fab would be advantageous
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Job summary

Support project delivery across Software Development Life Cycle, including analysis, design, development, QA, UAT, maintenance, and ongoing support

Job Responsibilities:

• Support the delivery of projects in all aspects of Software Development Life Cycle including system analysis, design, development, quality assurance, UAT, maintenance and ongoing support
• Contribute to Agile software development lifecycle and be familiar with DevOps processes
• Collaborate with cross-functional teams to troubleshoot ERP system problems and streamline data exchange with external systems
• Assist in user training to enhance system understanding and utilization
• Analyze business processes to optimize system efficiency and align capabilities with organizational goals
• Gather and document system requirements from stakeholders for enhancement, ensuring data integrity and accuracy
• Customize and configure the ERP system to meet business needs, implementing access controls for security
• Develop reports, dashboards, and custom solutions using development tools and frameworks for insightful system performance analysis
• Stay updated on system releases, industry best practices and continuously identify opportunities for system improvement
• Assist with ad-hoc duties assigned by Manager

Job Requirements:

• Bachelor's degree in Information Technology/ Computer Science or related field
• Minimum 3 years of experience in full stack software development, including 3 cycles of implementation
• Proven expertise in ERP system support, analysis and customization
• Strong troubleshooting skills and proficiency in SQL and database management
• Solid understanding of object-oriented programming (OOP) concepts
• Proficiency in specific ERP development tools and frameworks (e.g., BAQS, Dashboards, BPMs, UD fields)
• Experienced in developing application using .NET Framework, C#
• Advantageous to have experience with Epicor, Navision and Microsoft development technologies like C/AL, Dynamics NAV/ Business Central, .NET and Azure
• Effective communication and interpersonal skills, able to work independently or within a team
• Strong analytical thinking and problem-solving skills, with a keen attention to detail and a commitment to delivering high-quality results

Job Description:

• Perform physical failure analysis using FIB techniques;

• Sample preparation for above related techniques;
• Prepare service report for related customers;
• Document new failure analysis operating procedures, training and certification specs;
• Communicate with customer for selecting proper analytical technique and data interpretation;
• Participate in new failure analysis techniques development and evaluation of new technologies.

Job Requirements:

•Diploma/Degree in Engineering,

• Fresh graduates are also welcome to apply;
• Experience of using FIB/SEM/EDX is highly desired;
• Knowledge of semiconductor devices, hard disk devices, LED etc is a plus;
• Keen to learn and able to perform independent work;
• Able to do night shift work with flexible working periods. (night shift)
• Very attractive allowance will be given for the night shift.

This position is for FULL TIME morning/afternoon shifts, and will require some weekend shifts for maintenance and support activities. Work is non-routine and complex, involving the application of advanced technical/business skills in area of specialization. Provide direction and mentoring to others.

As a Principal Site Reliability Engineer, you will be part of the DevSecOps culture who will combine software and systems engineering to build, package, release and integrate tools and applications that will strengthen and innovate in the Cloud space within the Oracle SaaS-at-Customer and OCI DRCC infrastructure.

Responsibilities:

• Team members will engage in operational activities including monitoring, installation, patching, and upgrading of Oracle Fusion Middleware, Fusion Applications, and Oracle database implementations.
• Work on the SaaS Engineering Operations team with full stack deployment and support responsibilities.
• Address extremely complex, critical customer system issues on a routine basis and document technical solutions.
• Work directly with customers, product development, and product support to resolve critical customer application or performance issues in a timely basis.
• Understand the end-to-end configuration, technical dependencies, and overall behavioral characteristics of production services.
• Authority for end-to-end performance and operability.
• Perform frequent planned DR switchovers.
• Utilize a deep understanding of service topology and their dependencies required to troubleshoot issues and define mitigations.
• Collaborate with team members to improve the team's engineering tools, systems, procedures, and security.
• Lead implementation of tools and processes using DevSecOps methodologies to innovate, design, develop, secure, build, release and support fully automated CI/CD pipelines for the development and maintenance of Cloud Infrastructure Services and relevant applications.
• Manage and operate the infrastructure and configuration of microservices with a focus on end-to-end automation and infrastructure as code.
• Perform code development, OCI DRCC region builds, monthly release deployments, operations engineering, and promotion to testing and production environments to support Sprint activities.
• Participate in developing, implementing, and enforcing policies to enhance cloud system security.
• Recommend technical policies and consult with development teams on remediation.
• Collaborate with team members to improve the team's engineering tools, systems, procedures, and security.
• Apply DevSecOps methodologies in assisting to determine the direction of current and future development projects.
• Evangelize security and application solutions and controls by creating and communicating presentations both internally and externally.
• Demonstrate flexibility and resilience in response to changing or ambiguous situations.
• Work across development and operational environments.
• Stay abreast of software testing technologies and best practices.

Minimum Required Experience

• Relevant experience to functional area with around 10 years of experience (7+ years of software engineering and at least 3 years of DevSecOps culture)
• Extensive experience with Oracle RDBMS, Real Application Cluster (RAC), Disaster recovery, WebLogic, Identity Management, Apache/HTTP, Apex and Fusion Middleware and/or other Oracle technologies.
• Experience with cloud solutions and security engineering/design experience on one of the major cloud platforms AWS, GCP, Azure, OCI (preferred).
• Extensive experience in using Terraform for orchestrating application resources and infrastructure in CI/CD platform.
• Extensive experience in DevSecOps culture.
• Extensive experience with scripting and coding languages like shell scripting (must), Python (must), Ruby (plus), Go (plus) but not limited to.
• Experience developing cloud native CI/CD workflows and tools such as Chef, Puppet, Jenkins, Ansible, Rundeck and Git.
• Experience with Release Management cycles and Git.
• Knowledge of storage (ZFS preferred), IP networking, VPN's, DNS, load balancing and firewall (F5).
• Experience with one or more of the following required (Docker, Kubernetes, Terraform, Kafka, Microservices, Machine Learning, Artificial Intelligence)
• Experience with full software development lifecycle and delivery using Agile practices.
• Extensive background in cloud applications, cloud platforms and/or experience providing cloud infrastructure platforms in complex environments.
• Highly self-motivated with the ability to work both independently and with members of a global team without close supervision.

Job Description

1. Inspection for production and delivery of PC components, ensure that the works are as per project specification.
2. Proper management of materials, workmanship of work and work area.
3. Ensure workplace safety and enforce safety measures at all times.
4. Coordinate with inspectors and logistics for smooth flow of work.
5. Submission of daily, weekly and monthly reports.

Requirement

1. A diploma in Civil Engineering or its equivalent.
2. Minimum 2 years of related work experience.
3. Excellent written & verbal communication skills with Customers, Contractors and all level of staff.
4. Good organizational and time management skills.

Job Description

• Deep dive into development lines, learning and understanding the mechanism of every application component, and promoting product scalability, stability and performance.
• Setup, manage and maintain product, middleware, big-data applications and services.
• Perform regular and ad-hoc server-side deployments, performance fine-tuning and troubleshooting.
• Design and develop automations for workflows.
• Capacity and Resource management.
• Responsible for the full-chain stress test to enhance the performance and remove redundancy of applications.
• Prepare routine operation documentation.

Job Requirements

• Bachelor’s or higher degree in Computer Science, Engineering, Information Systems or related fields.
• Minimum 3 years of working experience in Site Reliability Engineer roles.
• Extensive and hands-on knowledge with Linux operating systems (Ubuntu, CentOS, etc.).
• Knowledge of Computer Network(TCP/IP, DNS, etc.) and OS.
• Hands-on experience with at least one of the programming languages: Bash, Python, Go.
• Strong analytical and problem-solving skills with the ability to thrive under difficult and stressful situations.
• Passion and high sense of responsibility for work.
• Fast learning ability and a good team player.
• Detailed-oriented, cautious and prudent.

Skills below are optional but preferable:

• Experience with automation tools like Ansible, Jenkins.
• Experience with monitoring tools like Prometheus, Zabbix, Grafana etc.
• Experience with load balancing tools like LVS, Nginx, Openresty or HAProxy.
• Experience with container technology such as Docker, Kubernetes.
• Experience with Kafka and Codis

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. cynapse’s software platform is leveraging cutting-edge cloud/on-premise/edge platforms, advanced computer vision algorithms, advanced ML concepts & models, and more.

The company's Headquarter is located in Singapore (one-north Area)

Job Description

Cynapse is looking for a talented and highly motivated Computer Vision & Machine Learning Developer to join our AI team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of design and coding, working in a cutting-edge, dynamic and professionally challenging environment.

Responsibilities

• Assist in the development and training of computer vision models using state-of-the-art machine learning techniques.
• Work with large datasets for model training.
• Collaborate with engineers to implement and fine-tune models, focusing on performance, accuracy, and scalability.
• Contribute to the deployment and monitoring of trained models in production environments, ensuring robustness and reliability.
• Participate in the development and maintenance of MLOps pipelines, automating the process of model training, deployment, and monitoring.
• Conduct research to explore and implement the latest computer vision and MLOps techniques and technologies.
• Maintain and update model pipelines, ensuring they meet project requirements and deadlines.

Qualifications

• Bachelor’s degree in Computer Science, Data Science, Artificial intelligence, mathematics, Electrical Engineering, or a related field.
• Solid understanding of machine learning concepts, particularly neural networks and their applications in computer vision (e.g., convolutional neural networks, transfer learning, and deep learning architectures).
• Proficient in one or more popular machine learning frameworks such as TensorFlow, PyTorch, or similar.
• Experienced with computer vision libraries like OpenCV, scikit-image, or equivalent.
• Strong programming skills in Python, with expertise in using tools like NumPy, Pandas, and Matplotlib for data manipulation and visualization.
• Knowledge of data preprocessing techniques, including image augmentation, normalization, and resizing.
• Basic understanding of MLOps practices, including version control, continuous integration, and continuous deployment (CI/CD).
• Strong analytical and problem-solving skills with attention to detail.
• Good communication skills, both written and verbal, with the ability to work collaboratively in a team environment.
• Eagerness to learn and adapt to new tools and technologies in the rapidly evolving fields of machine learning, computer vision, and MLOps.
• (Optional) Experience with cloud platforms like AWS, GCP, or Azure is a plus.
• (Optional) Knowledge of Docker or other containerization tools for model deployment.
• (Optional) Familiarity with MLOps tools like MLflow, Kubeflow, or similar is a plus.

Personal Competencies

• Innovative, motivated and a quick learner
• Ability to work well in a small team and take end-to-end ownership of problems and their resolution
• Attention to detail, curiosity, and passion for technology

Benefits

• Competitive base salary and a generous stock option package
• Unique opportunity to work with a talented global team on cutting-edge technologies
• informal and exciting work environment with flexible hours

Due to the nature of the role, the position is considered for candidates that are only based in Singapore

Job Type: Full-time

Benefits:

• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th-month salary

Work Location: In person

Welcome to the dynamic world of LAI Games, a leading Singapore-based game studio at the forefront of revolutionizing arcade entertainment. As a key player in the industry, we pride ourselves on crafting immersive and thrilling gaming experiences that captivate players worldwide.

We develop our games in house, often in collaboration with top-tier video game creators and integrating the newest hardware from renowned technology suppliers in our arcade games. We are dedicated to pushing the boundaries of innovation.

Join us on this exhilarating journey as we seek a hands-on Senior Software Engineer to strengthen our team in creating the next generation of thrills!

The ideal candidate is somewhat of a jack of all trades, not afraid to venture into new topics. You are experienced in game development in Unity or Unreal, but you are also not afraid to architect and implement the software for a physical game that includes contributions from several technology suppliers and game creators. You can interact with our firmware and hardware engineers to come to an overall design that meets expectations.

What You’re Responsible For

• Lead all software development aspects of arcade games, from concept to completion.
• Collaborate with cross-functional teams to gather requirements and define software specifications for our products.
• Work closely with our own hardware and firmware engineers and external contributors to integrate our software to ensure seamless functionality.
• Develop software for physical arcade games integrating motion systems, VR headsets, lighting, sound effects, computer vision and haptic feedback to a seamless experience for our customers.
• Ensure high-quality, reliable, and innovative software solutions for a captivating player experience.
• Design and develop robust and efficient software solutions that meet our standards to guarantee a safe, positive user experience.
• Perform thorough testing and validation of software components to ensure reliability, safety, and performance under arcade conditions.
• Participate in DevOps activities, including continuous integration, deployment automation, and security enhancements.
• Document the design processes: development, testing, analytics, and troubleshooting.

What We’re Looking For

• Ability to lead a team and drive software development projects from start to finish.
• At least five years of experience in game development, where contributions from several parties are combined under your guidance.
• Bachelor's or master's degree in computer science, Computer Engineering, or equivalent field.
• Proficient in C/C++, C#, Python, experience with Unity, Unreal.
• Familiar with programming micro controllers like Arduino or Raspberry pi.
• Familiarity with software development methodologies including Agile, and experience working in Agile environments, version control systems, software test frameworks, and software testing techniques.
• Strong analytical thinking and problem-solving skills and a commitment to delivering high-quality results.
• Excellent communication skills and the ability to collaborate effectively with multidisciplinary teams.
• Able to work under tight deadlines and respond to changing business and technical conditions.

Special Requirements

• Experience in integrating functions like motion systems, VR technology, and other interactive elements into a final product.
• Experience with electrical or mechanical engineering.

Besides working with an awesome team, in an arcade, and making games, we also offer:

• Competitive salary
• Performance bonus
• Training and education programs
• Private medical, dental, and life insurance coverage
• Flexible working hours
• Quarterly self-directed personal development days
• Finish work early every Friday afternoon for social drinks and games
• Work in a dynamic, creative arcade/workspace
• Team events - being a part of the out-of-home entertainment industry, we like to have frequent team events and enjoy what the industry has to offer

LAI Games is a global company committed to growing our employees along with the business. We’ve worked hard to foster an intensely collaborative and creative environment, a diverse and inclusive employee culture, and training and opportunities for professional growth.

The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Job Description:

• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness..
• Able to coach Engineers in performing hardware trouble-shooting for daily operations
• Establish Preventive Maintenance (PM) plans for all implant equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Initiate meeting with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives and analyze low yield and WAT issues
• Establish stock levels of essential spare parts and consumables to support equipment maintenance based on forecasted manufacturing volume. Liaise with vendors to minimize / eliminate over-stock or under-stock
• Manage new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production
• Develop continuous improvement and Implement equipment improvement projects to improve equipment efficiency, cost reduction and reliability of equipment
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Set targets, goals, and projects for the section to minimize wafer scrap, equipment cost per wafer, optimize equipment capability and utilization to meet operational needs
• Provide feedback / training to AEs and TAs on their troubleshooting skills, equipment knowledge, decision making, risks assessment
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers
• Self audit and update specifications to meet TS16949 Quality Standard requirements
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager. Help the AE or Engineer on their career path development
• Provide long term solutions to address daily issues. Resolve department hardware chronicle issues.
• Create and maintain implant operation SOP and PM OI
• Develop continuous improvement to enhance equipment reliability and cost of ownership, Able to plan implant cost budget

Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Chemical / Material Science / Material Engineering
• Min 5 years of relevant work experience in Diffusion Implant Equipment
• Familiar with all the implant tools: Varian E500, VIISTA900, Axcelis GSD, Axcelis HE/VHE. AMAT XR80.
• An excellent team player with good interpersonal, communication and written skills
• Strong leadership capability to lead and provide guidance to juniors
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Office Location : Tai Seng

Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm

Salary (commensurate with experience) : Up to $5,000 + Variable Bonus + Annual Leaves + Medical Benefits

Industry : Construction Sector - A&A / Building Works

Job Description

•Check and analysis drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Oversee the projects, ensure compliance of contracts and the drawings with regulatory specifications.

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

•Attend meetings with architects and consultants

•Other ad-hoc duties as assigned

Job Requirements: Possess at least diploma in Electrical Engineering and Mechanical Engineering (M&E) or equivalent

•However, entry level are encouraged to apply, from recognized University by Singapore PE Board as training will be provided.

•Good operational planning for construction projects

•Good in communication and written abilities

•Required skill: Able to use Microsoft Project to present schedule to the client

•Knowledge in Construction and Renovation.

•Skills required: Autocad

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239

Fabrica AI Full time Electrical Engineer - Invention of Automatic Tile Grouting Robots

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your role would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. The following tracks are available:

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. If you like this process, you’d be a good fit for us.

Check out the link above for more information, and send your CV to [email protected]

Job Title: Assistant Engineer (ID1579)
Location: Pioneer, transport pick up Island wide in Singapore and JB Bukit Indah
Working Hours: 4334 days 12 hours shift (Day & Night or Normal) or Normal Shift Mon to Fri 8:30am – 17:30pm
Salary: $2000 - $3000
Benefit: AWS, Variable Bonus

Job Description
• To specialise in processes and to perform higher level of troubleshooting and failure analysis
• Guide the technicians and operators to achieve required output and quality
• To check on the supplementary materials change to ensure they are properly done
• To assist Line Engineer to check all the control chart and checklist
• To ensure smooth production operation with production report
• To monitor, troubleshoot and improve the production daily final test yield
• To perform maintenance and troubleshooting of machinery
• Any other jobs as assigned by Manpower supervisor

Requirement:
• Minimum Diploma Electronics / Mechatronics / Electrical / Mechanical discipline
• Basic operation & manpower control knowledge.
• Basic computer software knowledge such as Microsoft Excel or Words
• Good communication skills.