Duties to Perform:

The senior Gas Engineer will work on designing, tendering, and monitoring the installation of bulk gas and special gas systems for industrial properties in semiconductors, electronics, biopharma, and related industries. The gas systems include bulk gases, high-purity inert gases, flammable gases, corrosive gases, hazardous gases, and related distribution networks.

The senior Gas Engineer will collate the client’s capacity requirements and specifications and prepare the conceptual design, make a detailed design for system capacity, configuration, schematic, P&ID, PFD, layout, distribution, and system parameters, and prepare documents like the scope of work, reports, specifications, standards, logistics, and detailed drawings for tender. He or she will review proposals from contractors and continue to support them during installation when required.

The successful candidate will work closely with other disciplines such as architects, civil, cleanroom, electrical, automation, mechanical, and construction engineers, as well as CAD/ BIM designer in designing and delivering the project.

Requirements:

You should have a bachelor's degree in chemical engineering or equivalent.

You should have sound experience in designing high-purity, and specialty gases and systems related to semiconductors manufacturing or similar facilities. You should be able to comprehend clients’ URS, and design with concept design, schematics, PFDs, P&IDs, routing layout, the scope of work, specifications, and functional descriptions. The experience in designing chemical systems will be definite added advantage.

Your familiarity with the Semi standards and Singapore standards, manufacturing tools, materials, and CAD/ BIM will be an added advantage.

You should be able to make presentations to clients and engineers on design, tendering, project execution, supervising progress, and quality of work.

Able to work independently.

Able to travel / relocate.

Duties to Be Performed:

The Senior Chemical Engineer will work on designing, tendering, and monitoring the installation of bulk gas and special gas systems for industrial properties in semiconductors, electronics, biopharma, and related industries. The gas systems include bulk gases, high-purity inert gases, flammable gases, corrosive gases, hazardous gases, and related distribution networks.

The Senior Chemical Engineer will collate the client’s capacity requirements and specifications and prepare the conceptual design, make a detailed design for system capacity, configuration, schematic, P&ID, PFD, layout, distribution, and system parameters, and prepare documents like the scope of work, reports, specifications, standards, logistics, and detailed drawings for tender. He or she will review proposals from contractors and continue to support them during installation when required.

The successful candidate will work closely with other disciplines such as architects, civil, cleanroom, electrical, automation, mechanical, and construction engineers, as well as CAD/ BIM designer in designing and delivering the project.

Job / Skills Requirement:

You should have a bachelor's degree in chemical engineering or equivalent.

You should have sound experience in designing high-purity, and specialty gases and systems related to semiconductors manufacturing or similar facilities. You should be able to comprehend clients’ URS, and design with concept design, schematics, PFDs, P&IDs, routing layout, the scope of work, specifications, and functional descriptions. The experience in designing chemical systems will be definite added advantage.

Your familiarity with the Semi standards and Singapore standards, manufacturing tools, materials, and CAD/ BIM will be an added advantage.

You should be able to make presentations to clients and engineers on design, tendering, project execution, supervising progress, and quality of work.

Able to work independently.

Able to travel / relocate.

1. Assist Project Manager on Engineering efforts in technical projects at Semiconductor fabs in Singapore and occasional overseas.
2. Provide on-site engineering equipment start-ups, mechanical parts installation, trouble-shooting and maintenance support.
3. Acts as a Technical Resources in performing repair of Electro-mechanical Assemblies
4. Facilitates continuous improvement project that add value to customer.

Requirement

At least 1-2 years experience in Semi-Conductor Field

Position Summary

The production Supervisor supervises workers in a beverage manufacturing/production environment. They plan & assign work, implement policies & procedures & recommends improvements in production methods, equipment, operating procedures & working conditions.

Duties & Responsibilities

~ Understand & be able to operate all equipment & troubleshooting

~Ability to understand the production schedule & ensure the schedule is

followed.

~Responsible for ensuring the inventory management system is being

utilized correctly & accurately.

~Ensuring effective worker relations; providing worker coaching &

development; resolving worker issues through problem resolution.

~Balancing quality, productivity, cost, safety & morale to achieve positive

results in all areas; working to continuously improve in all areas.

~Managing departmental performance measures, including visual controls

& providing regular progress reports.

~Monitor systematic key performance indicators & help with continuous

improvement on said findings.

~Record daily numbers & send updated report throughout the end of day

~Responsible for implementing all company policies including GMP, PPE &

Safety.

~Responsible for ensuring all workers are adhering to safety guidelines.

~Training all workers & Tracking absenteeism.

~Discipline & coach according to company policies & document &

Performing all other duties as assigned.

Minimum Qualifications

~High school diploma or GED equivalent required

~Three years working in a manufacturing/production environment

required.

~Experience in machine operations in a production environment required

~Strong interpersonal & communication skills with strong team-production

skills

~Job type - Full time

~Pay- $50,000.00 - $55,000.00 per year

About SHOKZ

As the first bone conduction headset manufacturer in China, Shokz pioneered the foray into patented bone conduction technology and has built itself as a world-renowned headphone brand with its signature open-ear design. Utilising numerous patented acoustics and health technologie, Shokz aims to accelerate the development of their True Wireless Stereo series, their bone-conduction hearing aid and health product line.

Job Description：

Here, we explore the art of interaction between circuits and human body together. From the collection, processing to transmission of physiological signals, we listen to th body‘s whispers; from the design of status monitoring modules to the analysis of human body composition and signal quality, we objectively record the changes. We are the front-end of signal processing, the foundation of function realization, and the determinant of product ceiling!

Job Scope：

1. Conduct research on algorithms applied to wearable devices, explore algorithms for physiological signal processing, analysis, action classification, and recognition.

2. Implement the hardware platform to enhance the functionality, performance, and reliability of the algorithms.

3. Apply algorithms to products to amplify product advantages and enhance user experience.

Job Requirement:

1. Majors in Electronic Engineering, Electronic Information, Microelectronics, Automation,Biomedical Engineering, Optoelectronic Information Science and Engineering, Signal and Information Processing, Medical Information Engineering, or related fields.

2. Possess a focused mindset, a curiosity to explore the nature of things, and a pursuit of technological excellence.

3. Have clear logic and be able to swiftly keep up with the latest scientific research results.

4. Passionate about scientific research, committed to the commercialization of research outcomes, and enthusiastic about marketing them globally.

5. Prior experience in signal processing, mathematical modeling competitions, or acoustic projects is preferred.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

In 2021 the Singapore Hybrid-Integrated Next-Generation micro-Electronics (SHINE) Center was established.

One of the projects in SHINE focuses on developing the technology and demonstrating Radio Frequency (RF) and microwave applications on flexible substrates.

As part of this project, we have a position for a research engineer with proven knowledge and experience in researching, designing, and testing of microwave circuits and subsystems.

Qualifications

• Possess a Bachelor or Master degree in Electrical Engineering
• Experience in the simulation and design of microwave circuits and subsystems.
• Experience with tools such as ADS and HFSS.
• Experience with measurement of microwave circuits using VNAs.
• Able to work independently and in a team.
• Open to fixed-term contract.

The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Tasks:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• ecome the technical Expert for the respective machine specialization.
• ● Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Materials Engineering / Material Sciences / Chemistry / Chemical
• Min 2 years of relevant work experience in Thin Film CVD Equipment in the semiconductor industry
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

• Position : Site Engineer - Up to $4,200 - Seletar
• Location : Seletar
• Working hours : 5 Days Work Week – Monday to Friday: 8.30AM to 6.00PM
• Salary (commensurate with experience): Up to $4,200 + Performance Bonus + 14 Days Annual Leave
• Duration : Permanent
• Industry : Aerospace

Responsibilities:

• Create solutions to complex technical problems in life science, Power, water treatment, chemical and petro-chemical, shipyard and oil and gas plants.
• Do field/ bench Calibration of measuring instruments like Pressure, Temperature, Flow, radar level, analyzer, wireless and collect data
• Calculate calibration range, mA, Freq, required output and accuracy before doing calibration and record the result during calibration
• Analyze and compile technical and statistical information and prepare report
• Maintain accurate engineering documents

Requirements:

• Minimum Diploma in Electrical / Electronic / Instrumentation
• Minimum 3 years of relevant experience in the same field
• Knowledge relating to Mechanical and Measuring Instruments
• Technical report writing and able to read the schematic diagrams
• Preferably with Class 3 Driving License
• Bilingual in English & Mandarin to liaise with Chinese associates who can only speak mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Product area

Google Cloud accelerates every organization’s ability to digitally transform its business and industry. We deliver enterprise-grade solutions that leverage Google’s cutting-edge technology, and tools that help developers build more sustainably. Customers in more than 200 countries and territories turn to Google Cloud as their trusted partner to enable growth and solve their most critical business problems.

Job description

When leading companies choose Google Cloud, it's a huge win for spreading the power of cloud computing globally. Once educational institutions, government agencies, and other businesses sign on to use Google Cloud products, you come in to facilitate making their work more productive, mobile, and collaborative. You listen and deliver what is most helpful for the customer. You assist fellow sales Googlers by problem-solving key technical issues for our customers. You liaise with the product marketing management and engineering teams to stay on top of industry trends and devise enhancements to Google Cloud products.

Additional job description

The Google Cloud Security team is a group of security business engineers (Customer Engineers) who are dedicated to making the world a safer place by helping organizations protect themselves from cyber threats.

Qualifications

Job responsibilities

• Work with security businesses and Google Cloud teams to identify and qualify business opportunities, understand customer technical and compliance objections, and develop strategies to resolve blockers.
• Work with Google Cloud Security products to demonstrate and validate solution benefits in customer and partner environments. Maintain technical knowledge.
• Support Google Cloud Security opportunities and relationships, own technical aspects of solutions, and deliver presentations, product, solution briefings, proofs-of-concepts, and demos to customers, partners, and stakeholders.
• Prepare and deliver product messaging in an effort to highlight solutions value proposition using techniques including presentations, product demonstrations, white papers, trial management, and response documents.
• Travel to customer sites, conferences, and other related events.

Minimum qualifications

• Bachelor's degree or equivalent practical experience.
• 10 years of experience in a technical business engineering role in security or cloud native environments.
• Experience in cybersecurity (e.g., threat detection, malware intelligence, cloud security posture management, or identity and access management systems).
• Experience in selling/demo/Point of View (POV), Security information and event management (SIEM), Security Orchestration Automation and Response (SOAR) and Threat Intelligence solutions.
• Ability to travel up to 50% of the time.

Preferred qualifications

• Master's degree in Computer Science, Engineering, Mathematics, a technical field, or equivalent practical experience.
• Certification in cloud or security industry.
• Experience implementing security solutions for enterprises (e.g., threat detection and hunting, malware intelligence, cloud security posture management, or Identity and Access Management systems).
• Knowledge of product and solution market trends in the cybersecurity industry (e.g., ransomware, attack frameworks, zero trust, etc.).
• Ability to communicate and deliver presentations.
• Excellent problem-solving, communication, presentation, and active listening skills.

Position Summary:

The Senior AV Service Engineer is responsible for providing technical support, data collection, coordinating maintenance and operation activities to ensure the optimal operation of autonomous vehicles.

Key Responsibilities:

Level 1 Troubleshooting and Technical Support:

• Provide on-site Level 1 troubleshooting support (when activated) and debugging for technical issues encountered. Work with Level 2 support to identify, diagnose, and resolve basic configurations concerns, or minor hardware malfunctions.
• Collaborate with specialized teams or senior engineers to escalate complex issues beyond Level 1 for further analysis and resolution.
• Offer comprehensive customer support by resolving queries, providing technical assistance, and ensuring customer satisfaction.

Data Collection and Analysis:

• Execute routine data collection processes from data loggers, onboard sensors, software systems, diagnostic tools and feedback forms
• Analyze collected data to identify performance patterns, trends, and potential areas for optimization or preventive maintenance

Maintenance Coordination:

• Conduct and facilitate regular inspections, diagnostic tests, and scheduled maintenance for all vehicle assets including on-board equipment to ensure optimal functionality and safety.
• Develop maintenance schedules, ensuring adherence to protocols and manufacturer's guidelines for regular inspections, software updates, and component replacements.

Documentation and Reporting:

• Maintain meticulous records of Level 1 troubleshooting procedures, data collection findings, and maintenance activities performed on the buses.
• Generate detailed reports outlining identified issues, recommended solutions, and actions taken for each maintenance task or diagnostic analysis.

Operational Coordination:

• Coordinate operational activities including scheduling, resource allocation, and route optimization for the AV fleet.
• Collaborate with engineering, operations, and management teams to facilitate coordination between technical tasks and operational requirements.
• Propose and implement improvements to enhance operational efficiency, reliability, and customer satisfaction.

Any other additional duties not listed above but deemed appropriate for product and operations support by project basis.

Qualifications:

• Minimally a diploma in relevant Engineering field with equivalent work experience, with a focus on mechatronics preferred
• Familiarity with Unix (Ubuntu) environment
• Good understanding of Class 4 autonomous buses equipped with SAE Level 4 autonomy, including sensor technology, control systems, and software.
• Proficiency in Level 1 troubleshooting, data collection methodologies, and coordination of maintenance activities for Class 3 and 4 vehicles and electronics equipment
• Excellent communication skills and the ability to collaborate effectively with technical teams and stakeholders.
• Dedication to meticulous documentation and reporting practices.
• A Class 3/4 driving license will be an added advantage.

Experience:

• 3-5 years of hands-on experience in service engineering, technical support and/or operations coordination. Prior experience related to Class 3 and 4 vehicles will be an advantage.

Job Title: Assistant Engineer (ID1579)
Location: Pioneer, transport pick up Island wide in Singapore and JB Bukit Indah
Working Hours: 4334 days 12 hours shift (Day & Night or Normal) or Normal Shift Mon to Fri 8:30am – 17:30pm
Salary: $2000 - $3000
Benefit: AWS, Variable Bonus

Job Description
• To specialise in processes and to perform higher level of troubleshooting and failure analysis
• Guide the technicians and operators to achieve required output and quality
• To check on the supplementary materials change to ensure they are properly done
• To assist Line Engineer to check all the control chart and checklist
• To ensure smooth production operation with production report
• To monitor, troubleshoot and improve the production daily final test yield
• To perform maintenance and troubleshooting of machinery
• Any other jobs as assigned by Manpower supervisor

Requirement:
• Minimum Diploma Electronics / Mechatronics / Electrical / Mechanical discipline
• Basic operation & manpower control knowledge.
• Basic computer software knowledge such as Microsoft Excel or Words
• Good communication skills.

Job Purpose:

To support the Program Manager in strengthening existing customer relationships and ensuring smooth day-to-day operations, which include New Product Introduction (NPI), Order Administration, BOM Management and Planning.

Job Description:

1. Customer Relationship Management

• Build and maintain strong relationship with customers by identifying and assessing customers’ current and future needs
• Timely fulfilment of customers’ orders or communication of schedule revision
• Liaise with internal departments to ensure orders will be fulfilled on time
• Respond to all customers’ inquiries promptly
• Prepare and provide reports and proposals to customers as required
• Support customers’ audits and visits when necessary

2. New Product Release

• Responsible for ECN (Engineering Change) and new BOM (Bill of Material) management, which includes item master creations.
• Ensure that all ECNs and BOMs are cross checked before releasing it and any ad hoc amendment to the BOM through internal ECN or waiver
• Manage FAA (First Article Approval) submission and approval.
• Define Production Routing Guide for manufacturing
• Ensure packing handling units (carton & palletization) are defined accordingly
• Maintain customer part numbers in ERP system
• Manage EOL (End of Life) of products.
• Handles new customer requirement that involves ERP system update and UAT
• Work together with manufacturing engineer & production to define the relevant process or packing instruction
• Maintain the relevant documents pertaining to BOM management, which includes work instruction, sticker placement
• Interface customer with respect to NPR, ECN, and FCS launch management
• Prepare samples for customer review/approval
• Prepare and participate in customer audit on new SKUs or artwork
• Create BOM structure for all new product release from sketch and maintain item, BOM, ECN and void in customer's SAP as per customer requirements

3. Report and Masterlist Tracking

• Ensure FAA Tracking List and BOM masterlist are well maintained
• Prepare launch tracking report
• Prepare QBR data on relevant sections
• Prepare weekly/ monthly reports as requested by customers and management

4. Order Processing

• Acknowledge and process sales orders, coordinate with various departments and related parties to fulfil order
• Prepares samples, price estimates and quotations within customer’s expectations and timeframe
• Creates work orders for production and replacement work orders if necessary
• Ensure prompt billing of invoices and assist in overdue payment collection
• Manage customer’s product content effectively

5. Material Planning

• Plan and make purchase requisition for necessary materials to ensure materials availability in meeting production needs while minimizing inventory holding/costs
• Manages inventory level for raw materials, work-in-progress and finished goods
• Analyse order trends and prepare forecast schedule to material planner

6. Productivity and Innovation

• Identify potential improvement initiatives
• Implement feasible improvement initiatives to enhance effectiveness, efficiency and/or economy

Job Requirements:

• Diploma/Degree in Business Administration, Supply Chain Management or other relevant fields
• 1 – 2 years of experience in operations/supply chain environment (Program Administrator)
• 3 – 5 years of experience in operations/supply chain environment (Senior Program Administrator)
• Strong interpersonal skills with good presentation and communication abilities
• Independent and proactive, with strong customer service orientation.
• Experience in printing and packaging industry will be an added advantage
• Knowledge in MRP and SAP systems will be added advantage

The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Provide 24x7 support for all Diffusion Wet Equipment Tools and Issues

Task:

• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness..
• Able to coach junior engineers in performing hardware trouble-shooting for daily operations
• Establish Preventive Maintenance (PM) plans for all implant equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Initiate meeting with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives and analyze low yield and WAT issues
• Establish stock levels of essential spare parts and consumables to support equipment maintenance based on forecasted manufacturing volume. Liaise with vendors to minimize / eliminate over-stock or under-stock
• Manage new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production
• Develop continuous improvement and Implement equipment improvement projects to improve equipment efficiency, cost reduction and reliability of equipment
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Set targets, goals, and projects for the section to minimize wafer scrap, equipment cost per wafer, optimize equipment capability and utilization to meet operational needs
• Provide feedback / training to AEs and TAs on their troubleshooting skills, equipment knowledge, decision making, risks assessment
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers
• Self audit and update specifications to meet TS16949 Quality Standard requirements
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager. Help the AE or Engineer on their career path development
• Provide long term solutions to address daily issues. Resolve department hardware chronicle issues.
• Create and maintain implant operation SOP and PM OI
• Develop continuous improvement to enhance equipment reliability and cost of ownership, Able to plan implant cost budget

Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Chemical / Material Science / Material Engineering
• Min 7 years of relevant work experience in Diffusion Wet / Wet Etching Equipment
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible and focus on improving tool performance and availability, in charge if maintenance, diagnosing failures and implementing effective solutions to meet uptime and cycle time requirements in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD); or Physical Vapor Deposition.

Key Responsibilities

• Maintain equipment performance in cleanroom environment for quality production.
• Handle on-duty tasks and conduct fundamental alarm troubleshooting; identify root cause and problem-solve critical equipment issues with urgency
• Install and qualify new tool sets on schedule to increase capacity promptly
• Continually improve tool uptime availability, drive defect reduction and enhance hardware capability
• Develop defense and monitoring system to prevent equipment failure or performance lost.
• Analyze complex data sets and derive actionable insights to optimize equipment parameters and controls
• Actively collaborate with equipment suppliers and partners to identify tool deficiencies; develop, evaluate, and validate corrective and preventive solutions

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About the Opportunity

This role in our Technology squad is embedded in a high caliber, cross functional team that develops and executes our exciting technology strategy to deliver better outcomes for our business and customer.

As a Software Engineer, you will be working with an agile and innovative team and build on your technical expertise with a myriad of technologies, projects and platforms to deliver our business priorities and conquer technical challenges.

What You'll be Doing

• Support the delivery of projects in all aspects of Software Development Life Cycle including system analysis, design, development, quality assurance, UAT, maintenance and ongoing support.
• Contribute to Agile software development lifecycle and be familiar with DevOps processes.
• Develop pragmatic and fit for purpose solutions of high technical quality.
• Work with stakeholders to define and clarify functional requirements and scope to deliver robust cost-effective solutions.
• Maintain software design, engineering processes and quality standards.
• Identifying and addressing bottlenecks in the application or broader infrastructure.
• Assist with ad-hoc duties assigned by Manager.

What We Are Looking for

• Diploma/Degree in Information Technology/Computer Science or related fields.
• 2 years’ experience in full stack software development.
• Required skills: C#, .NET Core framework, Angular.
• Knowledge in DEVOPS, Docker Container, Cloud Implementation, Secured Webservice will have an added advantage.
• Highly collaborative team player, detail-oriented and passionate with technology.
• Ability to thrive in fast-paced, exciting environment.

We regret that only shortlisted applicants will be notified for an interview.

To learn more about our Organization, please visit https://www.alliancehealthcare.com.sg.

Job Description:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies.

We are seeking a Senior Engineer with system integration expertise with design oversight to join our team. As a vital member of our team, you will be involved in the design, development, and testing of medical devices, ensuring compliance with regulatory standards and industry best practices.

Your role will involve collaborating with cross-functional teams to create innovative solutions encompassing hardware, software and chemistry by conducting verification and validation activities, and providing technical support throughout the product lifecycle.

The ideal candidate will have a solid understanding of system integration principles, best practices in verification and validation testing, and knowledge of medical device regulations (such as ISO 13485).

Join our dynamic team and contribute to the development of cutting-edge medical devices that improve patient care and well-being.

Job Roles and Responsibilities:

• Develop high-level system architectures that meet user requirements while considering design feasibility.
• Ensure that all system components are compatible and can be integrated seamlessly.
• Design and implement integration strategies and validate the functions as intended while adhering to design principles.
• Lead collaborative teams for the design, implementation, and validation while is capable to perform hand-on testing independently if required to complete engineering or verification studies.
• Lead creating innovative solutions that align with both technical specification and user needs for medical products.
• Coordinate between design, engineering, assay, project manager, and other disciplines to ensure cohesive product development.
• Author or oversee the writing of protocols and reports.
• Foster collaboration among team members to address challenges from both a technical and design perspective.
• Creating and maintaining technical documentation, including design specifications, test protocols, and reports, ensuring compliance with regulatory requirements such as ISO 13485.

Job Requirements:

• Experience in system integration and innovation.
• Bachelor’s degree in Engineering, Design or equivalent engineering or science background.
• Comfortable with navigating uncertain situations without clear guideline.
• Adaptability to changing work conditions and project requirements.
• 5-10 years’ experience in cross-functional product development roles and completed one full product development cycle.
• Track record in working effectively with diverse teams, including engineering, design, and marketing.
• Strong interpersonal skills to facilitate communication between technical and non-technical stakeholders and ability to summarize and communicate complex problems in simple terms.
• Strong analytical skills to troubleshoot integration issues while considering design implications.
• Able to break down complex system in simple steps and identify interfaces between modules and generate system diagrams, workflows and reports.
• Curious and proactive approach to gather information necessary for decision-making.
• Knowledge of statistical tools for data analysis such as (Python/Matlab/Origin/LabView) will be a strong advantage.
• Experience with design software. Experience with CFD simulation software such as ANSYS is advantageous.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Summary:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies. We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will take on the responsibility of leading a team in the design and development of mechanical systems. The candidate will work closely with cross-functional teams to lead projects, conducting feasibility studies and overseeing product development. They will also ensure that designs comply with both technical specifications and regulatory standards.

Job Roles and Responsibilities:

• Conceptualise, design, and develop mechanical components and mechanisms for medical devices.
• Responsible for the preparation and maintaining design documentation such as specifications, bill of materials, test protocols, test reports, etc.
• Lead a team to perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.
• Responsible for feasibility tests to assess the viability and performance of proposed designs.
• Work closely with cross-functional teams, including teams in molecular diagnostics, protein immune assays, and digital diagnostic technologies as well as electrical engineers, software engineers, and project managers.
• Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA, ISO13485, etc.

Job Requirements:

• Master’s or bachelor’s degree in mechanical engineering, or related field.
• At least 5 years relevant experience in mechanical design engineering and completed one full product development cycle.
• Three years of experience or equivalent in close and collaborative work with design managers and product managers.
• Experiences in leading a mechanical design team is a plus.
• Proficient in CAD software, such as SolidWorks, AutoCAD, etc.
• Strong understanding of engineering principles, materials, and manufacturing processes.
• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.
• Self-driven team player who can work in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

What you will be working on:

● Innovate and Build: Design and develop new, cutting-edge features for WebOrion®,

enhancing its ability to safeguard against web and API vulnerabilities.

● Pioneer AI Security: Research and create advanced modules for our next-gen AI firewall

that defends against AI-driven cyber threats.

● Full-Stack Impact: Manage and maintain databases, APIs, software, servers, and cloud

infrastructure.

● Agile Development: Contribute to an agile lifecycle—coding, debugging, testing, deploying,

and improving software releases.

● Customer-Centric Support: Provide top-notch technical support for our global enterprise

customers.

What we are looking for:

● Bachelor’s or Master’s Degree in Computer Science/ Engineering, Information Technology or

equivalent

● Hands on experience with Docker and programming languages such as Golang or Python.

● Interest in Security for AI. Defending against the next wave of AI attacks.

● Have a good understanding of RESTful APIs, databases, messaging queues, CI/CD tools

and software testing. Experience with Linux command-line and Git

● Able to write and document technical concepts

● Teamwork skills with a problem-solving attitude

● Preferably 1–2 years of relevant experience, though exceptional fresh graduates with

solid internship experience are welcome.

● Must be based in Singapore.

Why Join Us:

• Innovate for Impact: Be part of the team that's building a revolutionary AI firewall to
• defend against AI-driven threats, redefining the cybersecurity landscape.
• Global Exposure: Work with enterprise customers across ASEAN, Europe, and the
• US, gaining valuable international experience.
• Cutting-Edge Projects: Build cool cybersecurity products while working at the nexus of
• web, cloud, and AI security.
• Career Growth: Join a fast-growing company where your contributions make a real
• difference.

Interested applicants, please drop us a note at [email protected] with your CV and cover letter.

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

Position: Site Engineer cum Quantity Surveyor

About Us:

ADT Builder Pte Ltd specializes in constructing premium landed houses and Good good-class bungalow (GCB) projects, including those with basements. As the main contractor, we pride ourselves on delivering high-quality construction projects with precision and excellence.

Job Description:

We are seeking a dedicated Site Engineer cum Quantity Surveyor to join our team. The successful candidate will play a pivotal role in overseeing on-site construction activities, managing project costs, and ensuring the delivery of projects on time and within budget.

Key Responsibilities:

• Site Supervision:

• Oversee and manage daily site operations to ensure quality standards and project timelines are met.

• Coordinate with subcontractors, suppliers, and consultants to resolve technical and site issues.

• Conduct site inspections and ensure compliance with safety regulations.

• Quantity Surveying:

• Prepare and manage project cost estimates, budgets, and cost control.

• Measure and value construction work for progress claims and final accounts.

• Evaluate and prepare variations and extension of time claims.

• Manage procurement processes, including tender evaluations and material take-offs.

• Documentation & Reporting:

• Maintain accurate records, including site diaries, progress reports, and material records.

• Prepare and submit progress claims, invoices, and other contractual documents.

• Liaise with clients, consultants, and authorities on project updates and requirements.

Requirements:

• Diploma or Degree in Civil Engineering, Quantity Surveying, or related fields.

• 6 years of experience in site supervision and quantity surveying, preferably in residential or landed housing projects.

• Strong knowledge of construction methods, materials, and regulations in Singapore.

• Proficient in AutoCAD, Microsoft Office, and quantity surveying software.

• Excellent organizational, communication, and problem-solving skills.

• Ability to work independently and as part of a team.

What We Offer:

• Competitive salary package

• Opportunities for career growth and professional development

• Exposure to high-end residential projects

• A collaborative and supportive work environment

How to Apply:

Please send your detailed resume, including your expected salary and earliest availability, to [email protected]

Join us in building the future of high-quality residential construction. Apply today!

Responsibilities

Support engineer to perform daily operation tasks as follow:

• To provide technical support and troubleshooting for end user devices, including but not limited to laptop computers, mobile devices, monitor screen, docking stations, printers, network devices, etc.
• To track, maintain and perform record-keeping of Novo Nordisk IT assets such as laptop, iPhone, iPad, and monitor screen.
• To assist with new employee onboarding by providing necessary devices and access according to Novo Nordisk policy
• Coordinating with local vendors for computer parts replacement, RMA, and warranty claim
• Performing imaging process of Novo Nordisk laptop for Windows 10 and Windows 11 operating systems when necessary
• Other IT-related ad-hoc tasks as assigned
• VIDEOCONFERENCING MAINTENANCE
• Onsite diagnostic support for meeting room video conferencing equipment
• To provide service reports on the findings of issues reported

Requirement / Qualification

• 3 to 5 years’ experience as I.T support engineer
• Minimum – Diploma in I.T or relevant

Jason Marine Group Limited is a Maritime-centric Equipment and Service Provider based in Singapore, providing marine electronics and communications equipment/services and integration services for the commercial marine and offshore industries in Singapore, Asia and Europe regions.

We are seeking a Commissioning Technician to manage the design and installation of the marine electronics and communications equipment/services onboard shipping vessels, not limited to locally, offshore and overseas. He/ She will report directly to Commissioning Manager and the Energy Team in carrying out the following work and responsibilities:

• Support with implementation/ assembly/ design/ testing with system or/ and project Engineers.

• Carry out installation, termination, testing, troubleshooting, but not limited to Navigation, IT, Scada, Communication system and equipment in workshop assembly and onsite.

• Assist and/ or carry out Factory Acceptance Test & Site Acceptance Test with client.

• Contribute necessary improvements and offer advice about operational procedures.

• Work with the team to investigate problems and diagnose and repair faults, if any, in order for the equipment to work to its specifications

• Help out in the timely and accurate reports, documentation, timesheets, service reports as per company/ client format for submission and reporting.

• Work with the Service Department to resolve enquiries, if required.

• Any other associated tasks and responsibilities assigned from time to time.

Other Requirements

• Able to work under tight schedule and minimum supervision.

• Able to travel in short notice.

• Good verbal communication skill.

• Physically capable and available to work overtime including weekends and public holidays.

• Ensure a safe working environment.

• Experience in Telecommunication system in marine, shipyard, offshore is preferred. Job Title and Grade will commensurate with experience.

• Fresh candidates are also welcome as there will be onboard mentorship and On-Job-Trainings (OJT).

• Desirable overtime allowance after probation period.

Interested applicants can also send your resume/ cv to ‘[email protected]’.

The team in Singapore is looking for an ICT Security Engineering professional to increase its capability to improve the Bank detection & reaction to Cyber Threats by: Deploying, maintaining, and improving the new SIEM infrastructure. The new joiner will collaborate closely with the Production Infrastructure & Observability teams.

Direct Responsibilities

• Install and administrate the servers of the SIEM Infrastructure
• Develop automation on the different tasks and self-service tool
• Participate in the integration of new technologies logs
• Support logs parsing using custom parser/GROK development.
• Project management
• Be a full-time member of the Production CSIRT / SIEM Engg team and participate to the various activities of the team

Contributing Responsibilities

• Contribute to the Permanent Control framework for the implementation of policies and procedures in day‐to‐day business activities, such as Control Plan.
• Comply with regulatory requirements and internal guidelines.
• Contribute to the reporting of all incidents according to the Incident Management System

Competencies (Technical / Behavioral)

Production experience across the following technologies:

• Candidate must have overall 7 or more years of experience with a minimum 4-5 years on relevant scope ie. Expertise in handling ELK stack for large platform or architecture.
• Working knowledge of Elastic stack (Elasticsearch / Logstash / Kibana / Beats) including data ingestion, management, monitoring & analytics. (Mandatory)
• In-depth experience with Kafka
• Good working knowledge of Linux (RedHat/Ubuntu)
• Programming skills (Python or Bash) is appreciated.
• Experienced production support engineer
• Platform integration skills are a plus - Experience in installation, configuration, documentation, and administration of multiple pre-production and production platforms in both virtual and physical environments.
• Experience & skills in automation tools (e.g. Ansible) & DevOps pipelines are appreciated.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The job holders are to work with PI and the research team to process air quality data and study small-scale dispersion of airborne pollutants in urban environment.

Qualifications

One or more of (but not limited to) the following:

• Proven as a fast learner of conducting literature search and literature summary
• Experiences of VOC speciation via chromatography and/or online real-time detection instrument (e.g., PTR-MS)
• Proficient of handling data via 2 methods among Excel, R, Matlab, Python, etc.
• Proactive in assisting and contributing to quality scientific research publications
• Keen on field studies with prior experiences
• Proficient in technical presentation, slide making, report writing, etc.
• Proven rounded and effective team player with strong initiative and ownership of the research project