Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.
• Responds to fab issues by communicating with other engineers and participating in escalation conference calls. Verifies operational quality of system equipment unassisted . Assists senior engineers as needed.
• Follows all checklists and procedures and ensures correct Revs of procedures and schematics are available prior to performing work.
• Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve recurring technical problem. Demonstrates consistent ability to execute escalation plan. Able to resolve Day-Day issues. Exposure to systemic issue resolution. Able to support the preparation and delivery of technical issues to internal and external stakeholders. Knowledge in fundamental theories. Minimum aid needed to read circuit diagrams. Single primary product and platform. Executes projects to reduce costs and increase uptime.
• Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers (Testing). Has the ability to diagnose and resolve technical problems (Corrective maintenance). Uses training and experience to identify some process, software or hardware related system problems (Predictive maintains).
• Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management. Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge:

• Has established skills to perform a range of day-to-day activities.

Business Expertise:

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline.
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area.

Leadership:

• Has no supervisory responsibilities; manages own workload.

Problem Solving:

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options.

Impact:

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance.

Interpersonal Skills:

• Uses communication skills to exchange information.

Responsibilities:
* Design, implement, and maintain robust CI/CD pipelines for efficient software delivery.
* Collaborate with development, testing, and operations teams to automate build, deployment, and testing processes.
* Configure and integrate various tools and technologies to support automation and streamline the CI/CD pipeline.
* Develop automated test scripts and frameworks for functional, regression, and performance testing.
* Execute automated tests and analyze results to identify defects and areas for improvement.
* Monitor CI/CD pipeline performance and reliability, troubleshooting issues as needed.
* Continuously optimize and enhance the CI/CD pipeline for improved efficiency, scalability, and reliability.
* Work closely with cross-functional teams to ensure alignment with project requirements and timelines.
* Provide technical guidance and support to team members on automation testing and CI/CD best practices.
* Stay updated on emerging technologies, tools, and trends in automation testing and CI/CD DevOps practices.

Requirements:
* Bachelor’s degree in computer science, Engineering, or related field.
* Proven experience (Minimum 3 years) in building and maintaining CI/CD pipelines.
* Strong proficiency in CI/CD tools such as Jenkins, GitLab CI.
* Proficiency in scripting languages such as Python, Shell, or Groovy for automation tasks.
* Experience with containerization technologies like Docker and orchestration tools like Kubernetes.
* Hands-on experience with configuration management tools such as Ansible, Puppet, or Chef.
* Solid understanding of software testing concepts and methodologies.
* Experience in developing and executing automated test scripts using tools like Selenium, or JMeter.
* Familiarity with version control systems (e.g., Git) and code branching strategies.
* Strong problem-solving skills and attention to detail.
* Excellent communication and collaboration abilities.
* Proven ability to work effectively in a fast-paced, dynamic environment.

Preferred Qualifications:
* Certification in DevOps or Automation Testing.
* Experience with cloud platforms like AWS, Azure, or Google Cloud Platform.
* Knowledge of infrastructure as code (IaC) principles and tools such as Terraform or CloudFormation.
* Familiarity with Agile/Scrum methodologies.

• Strong data modelling and data analysis skills are a must.
• Familiarity with scripting for automating tasks using Python.
• Hands-on experience of reporting or visualization tool like SAP BO and Tableau is important.
• Good understanding and completion of projects using waterfall/Agile methodology.
• Good understanding of analytics and data warehouse implementations.
• Hands-on experience in DevOps deployment, ETL tools like Informatica, and data virtualisation tools like Denodo will be an added advantage.
• Analyse the Authority’s data needs and document the requirements.
• Refine data collection/consumption by migrating data collection to more efficient channels.
• Plan, design, and implement data engineering jobs and reporting solutions to meet the analytical needs.
• Develop test plan and scripts for system testing, support user acceptance testing.
• Work with partners to streamline processes and implement automation to improve efficiency and quality of output.
• Work with the Authority’s technical teams to ensure smooth deployment and adoption of new solution.
• Ensure the smooth operations and service level of IT solutions.
• Support production issues

Job Description

• Co-ordinate with a team of technicians to provide on-site installation and support to customers for Electromechanical and Electrical wiring systems.
• Manage and Report project progress and continually assess & adjust resource requirements to meet customer timelines.
• Co-ordinate cross functional efforts and attend technical meetings with customers to meet customer design requirements.
• Manage and Report project progress and continually assess & adjust resource requirements to meet customer timelines.
• Drive new product development from initial prototyping to mass production.
• Sourcing new components and equipment to support new products & responsible for cost evaluations of new product and tooling.
• Co-ordinate/oversee progress of product development Cross-functional activities.
• Responsible for project FAI and project documentation (such as Customer-approvals, Drawings, Specifications, Production SOP, Work-Instructions etc.)
• Work with QA/QC to analyze and handle any quality issue.
• Any other duties/projects assigned from time to time.

Requirements

• Minimum Qualification Level: Advanced / Specialist / Management / Graduate Diploma in Electrical/Mechanical/Mechatronic discipline
• Good command of spoken and written English and able to interact assertively and confidently with customers is a requirement.
• Knowledge and experience in Electrical Power distribution systems are advantages.

Mission:

As part of our continued growth, we are recruiting candidates for the role of Implementation Engineer to strengthen our team and contribute to international projects. The Implementation Engineer will play a key role in configuring PowerCARD application and developing customized solution for our clients. The primary responsibilities will include:

Key Responsibilities:

• Participate in studies, gap analysis, and technical design to identify specific configuration and development needs.
• Present standard interfaces and prepare technical specifications for interfaces and mapping.
• Work with the client to ensure their specifications are met and develop custom software as required.
• Prepare Technical Specification Forms (TSFs) based on Business Solution Descriptions (BSD) for specific functionalities.
• Develop customer-specific solutions based on TSFs and conduct unit testing.
• Correct bugs reported by the test team.
• Assist in configuring and integrating various modules of the solution to meet the customer’s needs.
• Participate in the installation of project deliverables at the client’s site.
• Assist the client with integration and acceptance testing, ensuring smooth implementation.
• Diagnose and resolve bugs reported by customers to ensure the expected functionality.

Certification, Acceptance, and Go-live Phases:

• Guarantee certifications with international networks (Visa, Mastercard) to approve and certify the solution and interfaces.
• Assist the client during the acceptance testing phase and implement pilot programs to test the production environment.
• Prepare and deliver patches and ensure the smooth transition of the project to the production phase, including handing over to the HPS support team.

Reporting and Performance Tracking:

• Report incidents and anomalies to impacted teams.
• Maintain daily activity reports on HPS tools to contribute to performance monitoring and optimization.

Qualifications:

• Bachelor’s degree in Computer Sciencec, Engineering, or a related field.
• At least 3 years of professional experience in a similar role.

Must-Have Skills:

• JAVA 17
• Angular
• Spring Boot
• Kubernetes
• Knowledge of DevOps tools such as JIRA, Bitbucket, and Jenkins

Nice-to-Have Skills:

• C
• Gradle
• Liquibase
• gRPC & Protobuf
• Spock
• Helm
• Terraform
• Kafka
• Elasticsearch
• AWS

Additional Skills & Knowledge:

• Strong knowledge of testing techniques
• Proficiency with Oracle databases
• Familiarity with HP-UX, LINUX, Unix AIX, and Solaris
• Knowledge of PL/SQL, C, Pro*C, JavaScript, and Shell scripting

This is an exciting opportunity to be part of a dynamic team working on cutting-edge technology and international projects. If you meet the required qualifications and are passionate about implementing innovative solutions, we encourage you to apply

JOB SUMMARY

Responsible for the development and delivery of a wide range of state-of-the-art products for global markets, from invention to mass production.

JOB RESPONSIBILITIES

• Perform design of electro-mechanical subsystems, micro-mechanisms and transmission systems
• Work with the Manufacturing team and part suppliers throughout the product cycle in a fast-paced environment
• Coordinate Fabrication and Assembly of prototype designed and pilot run articles
• Perform FMEA & carry out other design simulation required
• Review and evaluate vendors for performance
• Use computer-aided design software to create 2D technical drawings from 3D files
• Handle assignments under minimal supervision and tight schedule
• Participate in project meetings and conference calls with customers
• Discuss with customer on:

- Dimensions, tolerances and material requirements

- Critical/functional area

- Assembly and inspection methods

- Purchased parts with specific brands or models

- Aassembly drawing and BOM lists

- Revision to technical drafts based on the discussion

- Work with customers regarding accuracy, drafting standards and documentation

- Review drawings for completeness and accuracy

- Prepare engineering documents for submission to customers

- Maintain all revisions of project drawings, update and maintain drafting log

- Assist and provide all information to Sales team for quotation submission to customers

- Provide timely technical assistance and solutions to Production team

- Perform any other duties as assigned by the Company

JOB-RELATED SKILLS

• Good team player with strong passion for design
• Proficient in using CAD tools like Solidworks and other simulation tools
• Simulation tools & programing skills (eg. Python) is added advantage
• At least 2 years experience
• Experience working in a metal fabrication shop or similar environment will be added advantage

Job Description:

• Corporate with the constrcution manager to connect with various government acceptance departments.
• Corporate with the constrcution manager to supervise and manage the site to meet the various goals of the project.
• Corporate closely with subcontractors to monitor the progress of small towns and coordinate the work resources required by subcontractors to meet project requirements.
• Corporate with goverment personnel to conduct on-site inspections.
• Participate in weekly or monthly meetings with subcontractors to discuss work progress and corperate in preparing monthly meeting progress reports.
• Establish good relationships with all relevant parties.
• Corporate to ensure site safety and comply with the requirements of the authorities.
• Corporate to organize relevant physical and electronic documents on site engineer, etc.
• Other tasks assigned by the manager.

Requirements & Qualifications:

• Diploma / Degree or above preferably from a recognized University accredited with PEB, Singapore
• Experience with public residential projects would be advantages
• Proficient in Microsoft Office / Projects, AutoCAD
• Ability to keep a positive attitube in a fast-paced environment
• Good team player

Responsibilities

> Perform design for manufacturability in all new projects

> Provide PCB manufacturing technical advice to customers on their

new projects

> Perform feasibility studies and reviews for all new data received from

customers

Requirements

1. Degree in Electrical & Electronics Engineering or Diploma with 2 – 3

years in manufacturing environment

2. Good communication, report writing and presentation skills

3. Good analytical skill with ability to work independently

4. Ability to communicate with all levels of staffs

5. No experience requires if able to meet the above requirement may

apply

Job Responsibilities :

• Liaise with client and develop design concepts and basis of design to set direction of design.
• Check engineering deliverables and assure technical integrity of design.
• Ensure all engineering works comply with all relevant Statutory standards, Regulations and Codes of Practices.
• Carry out various types of geotechnical design and analysis – deep excavations, shafts, tunnels, slopes, foundations, etc.
• Carry out appropriate design of structural nature where required.
• Highlight technical issues and update Construction Department on changes and distribute to vendors, engineers and supervisors.
• Plan and execute geotechnical and instrumentation installation and monitoring works.
• Site evalution of soil, rock, fault distribution and geological studies on site to determine their engineering properties.
• Performs other duties or projects as assigned.

Job Requirements:

• Minimum a Diploma, Degree in Civil Engineering, Geology or its equivalent.
• Preferably with a minimum of 2 years of relevant working experiences in construction industry.
• Proficient in Microsoft Office, AutoCAD and Geotechnical analysis software.
• Able to communicate effectively with Client, Consultants, Management and Subcontractors.
• Location: East

• Experienced in the design of water treatment plants (desalination, potable water, recycle water), wastewater treatment plants (municipal and industrial) and membranes systems (MBR, MF/UF, Reverse Osmosis, Nano-Filtration, etc.)

• Review Client’s Requirement, Technical Specifications & Tender Specifications to generate engineering deliverables (General Specification & Particular Specifications, Datasheets, Major Equipment List, Pipe List, Mass Balance, Hydraulic Profiles, Process Flow Diagram, Process & Instrumentation Diagram, etc.)

• Assist the Engineering Manager on engagement with Clients, Consultants, Sub-Contractors, Vendors, and others for the development of design, procurement, fabrication, construction, erection and commissioning works.

• Coordinate with inter-disciplines engineering team (Process, Mechanical, Electrical, Instrumentation & Control Automation, C&S, Piping & Systems/Skids Engineering and Drafting) on development of engineering deliverable on a timely basis.

• Reviewing and providing input to project schedule and ensure all planned dates and progress are realistic. Provide updates on engineering deliverables per schedules and implement catch-up actions where applicable.

• Procurement Services Support: Develop the applicable Equipment List/Package, Technical Specifications and Bill of Materials to support Procurement Department to issue Request for Quotation (RFQ). Assist to review the RFQ, prepare applicable technical & commercial clarifications with selected Sub-Contractors or Suppliers. Provide justification on the shortlisted Sub-Contractors or Suppliers for onward negotiations.

• Assist the Engineering Manager on the development of FAT, SAT, Pre-Commissioning, Start-up, Commissioning protocol and support the implementation.

• Development of Operational & Maintenance Manual.

• Assist the Engineering Manager to support project management team in project implementation related engineering, troubleshooting and maintenance requirement.

We are looking for a candidate passionate about reducing carbon emissions in the built environment through intelligent energy management. We do this via the ENX™ Sustainability AI for the built environment, enabling the integration of IoT sensors and intelligent controls in order to:

• Perform Energy Monitoring
• Optimise ACMV, Lighting and Plug Loads
• Manage Air Quality, Occupancy, Water Quality
• Monitor Data Centre Infrastructure
• Report Sustainability KPIs in real-time

Featuring a modular system architecture, the ENX™ Sustainability AI can be deployed as a cloud-based Building Management System (BMS) for new build projects, or as an Energy Management System (EMS) for offices and warehouses that can integrate seamlessly with existing BMS infrastructure. Our customers have reduced energy consumption by up to 40%.

Responsibilities

• Pre-Sales & Closing: Engage with prospective clients (building owners and facility management teams) to understand their technical requirements, sustainability goals and budget constraints. Identify key decision makers and their objectives. Work with Design Engineering team to scope and update project proposals. Present project proposals, highlighting benefits, technical capabilities and how it meets client objectives. Negotiate on technical requirements and commercial terms. Close orders and hand over to Field Engineering team for project implementation. Update progress throughout pre-sales and closing using CRM software.
• Customer Relationship Management: Build and maintain relationships with building owners and facility management teams. Generate leads for upselling and future projects. Secure contracts from existing clients for SaaS renewals.

Job Requirements

• Degree in Engineering, Computer Science, Business, Marketing or a related field.
• At least 4 years of Outside Sales experience, preferably in building services or enterprise software.
• Good interpersonal and communication skills, passionate about technology, capable of working independently, and highly organized with strong attention to detail.
• Willing to travel to client jobsites within Singapore and Johor Malaysia. Preferably have own transport and driving license.

We are looking for a candidate passionate about reducing carbon emissions in the built environment through intelligent energy management. We do this via the ENX™ Sustainability AI for the built environment, enabling the integration of IoT sensors and intelligent controls in order to:

• Perform Energy Monitoring
• Optimise ACMV, Lighting and Plug Loads
• Manage Air Quality, Occupancy, Water Quality
• Monitor Data Centre Infrastructure
• Report Sustainability KPIs in real-time

Featuring a modular system architecture, the ENX™ Sustainability AI can be deployed as a cloud-based Building Management System (BMS) for new build projects, or as an Energy Management System (EMS) for offices and warehouses that can integrate seamlessly with existing BMS infrastructure. Our customers have reduced energy consumption by up to 40%.

Responsibilities

• Field Deployment: Interpret detailed drawings, Bill of Materials (BOM) and Scope of Works (SOW) issued by Design Engineering team. Plan, coordinate and implement projects at client jobsites, including site assessments, subcontractor management, as well as configuration and installation of our devices and sensors. Document project progress, findings and recommendations for continuous improvement. Provide technical training to clients and end-users on the operation and maintenance of our systems.
• Data Analysis & Field Technical Support: Analyse and interpret data collected from various equipment, devices and sensors, including Building Management Systems, electrical meters, BTU meters, IAQ Sensors and various PLCs. Provide technical support and maintenance services for projects at client premises. Coordinate with Helpdesk to troubleshoot and resolve site issues.

Job Requirements

• Degree or higher in Building, Civil/Mechanical/Electrical/Computer Engineering, Computer Science, Electronics or equivalent.
• At least 5 years of Engineering/IT experience, preferably in Building Services or Industrial Automation with good knowledge of automation, PLCs, SCADA, Building Management Systems, M&E systems, RTU devices and networking equipment.
• Good interpersonal and communication skills, passionate about technology, capable of working independently, and highly organized with strong attention to detail.
• Willing to travel to client jobsites within Singapore and Johor Malaysia.

Job Description

Key Responsibilities:

• Conduct thorough testing of the Applied Materials SmartFactory® MES solution to identify bugs, issues, and usability concerns.
• Develop and execute test plans, test cases or test scripts to ensure comprehensive test coverage.
• Collaborate with the development team to understand project requirements and functionality in order to create effective test scenarios.
• Report and track defects using appropriate bug tracking tools, and work closely with developers to resolve issues.
• Perform regression testing to ensure that previously identified defects have been fixed and that no new issues have been introduced.
• Participate in design and requirement reviews to provide input on testability and potential quality issues.
• Stay up-to-date with industry best practices, testing methodologies, and emerging technologies to continuously improve testing processes.
• Communicate test results and quality metrics to product owner in a clear and concise manner.
• Develops release note and detailed documentation.

Functional Knowledge:

• Have experience with GIT experience.
• Experience with Oracle DB or MSSQL Server is a must.
• Need some experience with Linux in clustered environment is a plus.
• Understanding of accessibility testing principles and guidelines.
• Experience in testing APIs and web services.

Business Expertise:

• Prior experience with MES/CIM Software is a plus.
• Prior working experience in semiconductor industry or semiconductor knowledge will be preferred.
• Understands key business drivers; uses this understanding to accomplish own work.

Leadership:

• No supervisory responsibilities but provides informal guidance to new team members.

Problem Solving:

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents.

Impact:

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills:

• Explains complex information to others in straightforward situations.

Travel:

• Regional travel is expected.

Experience:

• 3-5 years.
• More years of experience will be considered for senior position.

Key Responsibilities

• Develops code for moderately difficult software projects. Design and implement bug fixes
• Designs moderately difficult software projects
• Develops software documentation
• Troubleshoots a variety of moderately difficult software problems. Performs software tests on code and enhancements. Defines software specifications
• Interfaces with external customers regarding software issues
• Interfaces with internal customers for requirements analysis and schedule
• Compiles data for regularly scheduled or special reports, analysis and statements

Job Requirements:

• Bachelor degree in Electrical Engineering
• 4 - 5 years of proven experience in following technologies
• Familiarity with web technologies
• Windows Application development experience
  Track record of creating multiple Tier windows applications, using C# technologies with SQL DB backend
• Experienced C# Developer
  Experience with WPF MVVM design pattern.
  WPF experience
  GUI development
  Hardware integration knowledge.
• SQL database
  Queries
  DB creation, migration, efficiency improvement
  Indexing
  Stored Procedure

Work Location:

• Upper Changi (Bus 2, 5 and 37 available)

Work Arrangement:

• Fully Onsite

Quality Engineer

Roles & Responsibilities

This position is responsible for the timely, accurate, efficient preparation and management of Quality System, Quality tracking, Quality assurance & Quality control.

1. Full responsibility of Quality Assurance and Quality Control function to ensure Products quality are meeting customer’s expectation and accordance with regulatory requirements. (Throughout Product Life Cycle)

2. Update and maintain company Quality Management System and Documentation

3. Conduct internal audit and continuous improvement on departmental process

4. Responsible for Customer audit and ISO9001 certification.

5. Prepare for AS9100 certification and implementation.

6. Drive continuous improvement projects that lead to Product Quality and Operational Excellence.

Qualifications & Requirements

1. Bachelor’s degree with at least 3 years relevant working experience.

2. Diploma with at least 5 years relevant working experience may apply.

3. Strong knowledge of Quality system, such as ISO9001/AS9100 and other regulatory compliances.

4. Experienced on Supplier Quality management, In-coming, In-process, Outgoing inspection.

5. Preferably Electronics/Communication industry.

6. Familiar with internal & external audits.

7. Strong communication skill.

8. Possess ERP experience will be added advantage.

9. Fluent in English and Mandarin.

Job Description:

• Responsible to configure, setup, design process sequences, troubleshoot, and fine-tune processes on projects using FASA applications or help to develop them.
• Responsible for carry-out machine on-site setup and buy-off process.
• Act as a lead for core efforts such as setup, troubleshooting, and buy-off project using established procedures.
• Contribute to documentation.

Job Requirements:

• Experience in semiconductor process and engineering knowledge with a demonstrated understanding of troubleshooting at a high level.
• Experience as a team or project lead.
• Advance understanding of software configuration, machine system architecture, maintenance, repair and debug.
• Intermediate level of Omron PLC, Mitsubishi PLC, Siemens PLC, Allen-Bradley PLC, and Keyence PLC systems, including installation, setup, systems administration, troubleshooting, and fine-tune.
• Intermediate level with one or more general-purpose programming languages including but not limited to: Ladder Diagrams, Functional Block Diagram, Structured Text, and Statement List.
• Knowing how to communicate between PLCs and with other devices by RS232/TCPIP/Modbus/
• Effective interpersonal and communication skills, with the ability to interact appropriately with users of various technical-skilled levels and to remain professional while working to resolve problems.

Join the Team at McConnell Dowell Are you passionate about engineering and civil infrastructure? At McConnell Dowell, we deliver landmark projects that shape communities and drive progress.

We're seeking Project Engineers and Site Engineers to join our team in Singapore and contribute to our civil infrastructure works projects.

About the Role

As a Project Engineer or Site Engineer, you'll play a pivotal role in ensuring the successful execution of our projects. Your responsibilities will include:

• Overseeing engineering, planning, quality, cost control, and scheduling functions.
• Adhering to the McConnell Dowell Project Execution Plan and safety/environmental responsibilities.
• Assisting senior engineers and the construction manager in daily site activities.
• Monitoring and reporting on site progress, including direct employee and subcontractor works.
• Developing procedures for construction activities and ensuring compliance with relevant legislation.
• Representing McConnell Dowell professionally in interactions with clients and stakeholders.
• Promoting McConnell Dowell’s core values and fostering a strong safety culture.

What We’re Looking For

To excel in this role, you should have:

• A degree in Civil or Structural Engineering. 3 to 5 years of relevant on-site civil construction experience.
• Preferably, local experience and knowledge of civil infrastructure projects in Singapore.
• Strong interpersonal and communication skills.
• The ability to work on an alternate 6-day workweek schedule.

Why Join McConnell Dowell? Be part of a dynamic team working on major civil infrastructure projects. Gain valuable experience with a globally recognized infrastructure company. Contribute to innovative and impactful engineering solutions.

How to Apply If you're ready to take your engineering career to the next level, we want to hear from you! Submit your application today and join McConnell Dowell in building a better future.

Join the Team at McConnell Dowell Are you passionate about engineering and civil infrastructure? At McConnell Dowell, we deliver landmark projects that shape communities and drive progress.

We're seeking Project Engineers and Site Engineers to join our team in Singapore and contribute to our civil infrastructure works projects.

About the Role

As a Project Engineer or Site Engineer, you'll play a pivotal role in ensuring the successful execution of our projects. Your responsibilities will include:

• Overseeing engineering, planning, quality, cost control, and scheduling functions.
• Adhering to the McConnell Dowell Project Execution Plan and safety/environmental responsibilities.
• Assisting senior engineers and the construction manager in daily site activities.
• Monitoring and reporting on site progress, including direct employee and subcontractor works.
• Developing procedures for construction activities and ensuring compliance with relevant legislation.
• Representing McConnell Dowell professionally in interactions with clients and stakeholders.
• Promoting McConnell Dowell’s core values and fostering a strong safety culture.

What We’re Looking For

To excel in this role, you should have:

• A degree in Civil or Structural Engineering. 3 to 5 years of relevant on-site civil construction experience.
• Preferably, local experience and knowledge of civil infrastructure projects in Singapore.
• Strong interpersonal and communication skills.
• The ability to work on an alternate 6-day workweek schedule.

Why Join McConnell Dowell? Be part of a dynamic team working on major civil infrastructure projects. Gain valuable experience with a globally recognized infrastructure company. Contribute to innovative and impactful engineering solutions.

How to Apply If you're ready to take your engineering career to the next level, we want to hear from you! Submit your application today and join McConnell Dowell in building a better future.

Roles & Responsibilities

• Bachelor's Degree in Civil Engineering or equivalent
• Experienced in Waterproofing works
• Preferable 5 yrs of local experience
• Maintain project schedule by monitoring project progress, coordinating activities, and resolving problems
• Ensure that works are carried out according to specifications, drawings, and programmes without compromising on quality and safety
• Ensuring Supervisors & Foremen meet client & regulatory work requirements
• Take site measurements and prepare monthly progress claims and monthly progress reports.
• Liaise with Authorities and Main-contractors
• Prepare Waterproofing Safety Risk Assessment (RA), Method of Statement (MOS), and Safe Work Procedure (SWP)
• Attend and participate all Safety Meetings organized by Clients
• Ensure overall safety well being of workers in the workshop as well as the on site during project execution
• Maintain safe & clean working environment by enforcing rules & regulations
• Lead a team of supervisors to ensure full-time supervision of works on site

• Oversee the continuous operation of the organisation’s IT Infrastructure, including networks, servers, email security and backup systems.
• Develop and implement strategies to enhance infrastructure resilience, particularly for planned maintenance and power outages.
• Lead cybersecurity initiatives, including the development and execution of phishing simulations and cybersecurity awareness programs.
• Act as a liaison to facilitate IT related communication across departments, adapting technical information for non- technical stakeholders.
• Provide technical support and guidance to employees across all levels, ensuring efficient problem resolution and minimal disruption to daily operations.
• Continuously research and evaluate new technologies and solutions that can drive efficiency, enhance security and support the organization’s evolving needs.
• To support Digitalisation Transformation team members in the areas of IT/ OT cyber security measures including assessment of project scopes, budgetary and proposal.
• To be trained to maintain up-to-date knowledge of the IT Security industry, including awareness of new or revised security solutions, security standards, trends/best practices, offensive techniques and tools.
• Perform other tasks as assigned by the supervisor.

Education/ Experience/Skills

• Minimum Diploma qualifications ( e.g. NIE, SIM, LaSalle-SIA, NAFA ) or equivalent.
• Minimum 2 years’ of experience in Computer Science.
• Knowledge in ERP system like Microsoft Navision is an added advantage

Job Description

• Recommend and build require infrastructure for optimal extraction, transformation and loading of data from various sources such as ERP. MES and other systems using SQL technologies.
• Create, manage and maintain optimal data pipeline architecture. API and integration for ERP, MES and other systems used in the company.
• Monitor and manage database and related systems to ensure optimized performance.
• Assemble large, complex data sets that meet functional and non-functional business requirements.
• Working with stakeholders such as sales, finance, operations, design, and executive teams to support their data infrastructure needs while assisting with data-related technical issues.
• Build business intelligence and analytical tools using Power BI to utilize the data pipeline, and provide actionable insight into key business performance metrics.
• Participate in external and internal audit to ensure company data and related system is effective and validated.
• Create and maintain documentations and compliance for data and systems with reference to industry best practices.
• Perform other tasks as assigned by the supervisor.

Requirements

• Bachelor’s degree (or equivalent) in Computer Science, Information and Communications Technology, or related discipline
• 3 or more years with RDBMS and NoSQL databases
• 3 or more years of experience with Python, SQL, data visualization and exploration tools
• Working experience in MedTech / Manufacturing Industry
• Experienced in building and maintaining ETL processes.
• Experienced with Microsoft-based stack (M365, Power Platform, Azure, Dataverse,Microsoft SQL Server)
• Knowledge of best practices in ICT operations and data management
• Excellent problem solving and troubleshooting skills.
• Process orientated with great documentation practices.
• Communication skills, especially for translating technical concepts to non-technical business leaders.
• Ability to work on a dynamic, action-focused team that has concurrent projects

Job Description

Key Responsibilities

• Design or modify electrical/electronic engineering assemblies, layouts/schematics and/or detailed drawings/specifications of moderate scope under general supervision
• Perform basic engineering analysis under general supervision
• Perform and generate basic engineering test reports under general supervision
• Generate related alpha/gamma documentation for product release
• Coordinate the procurement and assembly of electrical/electronic components/equipment and identify sources of critical parts and subsystems to resolve technical issues
• Troubleshoot a variety of moderately complex electrical problems
• Implement concepts for product issues and electrical solutions of moderate difficulty
• Assist in development of electrical product specifications

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

Section A: Objectives/Purpose of the Job

The successful candidate will support the execution of planned changes at our Singapore sites, focusing on hardware replacements, troubleshooting, and installations. This role is vital for ensuring smooth operations and minimizing downtime during change implementations.

Section B: Key Responsibilities & Key Result Areas

• Network Equipment Familiarity: Understand and work with network devices and their components, including fibre and copper cables.
• Support Planned Activities: Participate in early morning green zone activities (between 11pm and 6am) two to three times weekly within Singapore, as required.
• On-site Hardware Support: Execute hardware changes, including the physical replacement and installation of network devices, plugin of USB media, organize the fibre/copper cables in preparation for planned activities and other equipment as per change requests.
• Troubleshooting: Diagnose and resolve issues encountered during change implementation with existing hardware and consoles, ensuring minimal disruption to operations.
• Console Setup: Provide console connection as needed during planned activities.
• Communications: Liaise and coordinate with implementation engineers, internal stake holders , providers and partners to ensure swift and efficient resolution of faults
• Continuous Improvement: Identify areas of improvements to reduce Infrastructure faults and improve monitoring capability.

Working Hours:

• Regular Hours: 8:30am-6pm SGT in Singapore Office, if no on-site activity
• Early morning green zone activities: twice or thrice weekly, between 11pm to 6am

Additional Information:

• Travel: travel within Singapore required
• Physical Demands: Ability to lift and move equipment as necessary, and perform tasks in various physical environments.

Section C: Qualifications & Experience

Must have

Good to have

Qualifications

A good Diploma in Electrical / Electronic / Computer Engineering / Computer Science / Information Systems from a recognized institution

Candidates with 2 years of relevant experience and knowledge in network devices and transport can be considered if there is no diploma.

Experience

1 – 2 years of hands-on experience on network devices

Technical / Professional Skills

• Knowledge of routers/switches architecture and analytical trouble-shooting skills in the area of technical fault isolation and rectification.
• Working experience and strong understanding of Juniper devices and its parts will be an added advantage

Non-Technical / Soft Skills

• Possess good interpersonal and communication skills.
• Possess basic knowledge of office applications skills e.g. Excel, Visio, Word.
• Self-starter and highly driven with the ability to work independently, as well as in a team.

Job Description:

• Review and Study customer's specifications and drawings
• Set up machines and create samples
• Update sample making records
• Assist in new product development
• Create and maintain jigs and fixtures
• Assembly of wire harness and Electromechanical parts
• Any other duties assigned from time to time

Requirements:

• Good eyesight as some components are small
• Not color blindness for identify colored cable and label
• Understand basic English to read drawing and cutting length

Job Types: Full-time, Permanent

Schedule: Monday to Friday

Job Description:

• Responsible for on-site technical and engineering matters.
• Supervise & coordinate day-to-day site works, including sub-contract works, safety and quality control.
• Site inspection & upkeep site record.
• Liaise with consultants, client etc.
• Other duties assigned by Site Manager / PM.

Requirements & Qualifications:

• Graduate Bachelor in Engineering (Civil) or equivalent.
• 3-5 years work experience in Building Construction.
• Able to work independently.
• Autodesk Revit MEP experience will be an advantage