Brief Description & Role

This position is responsible for testing, troubleshooting, and repairing RF components and systems. You will work closely with cross functional teams to ensure the quality and performance of RF equipment, ensuring that all devices meet the required specifications and standards.

Responsibilities

1. Work with business development, Engineering, system test and external customers to gather information and develop RF Test plans, specifications for product under test.
2. Perform RF testing using test equipment such as spectrum analyzer, noise figure meter, power meter, network analyzers, and signal generators.
3. Assembling/debugging the RF test system and device under test.
4. Hands on troubleshooting and repair of RF product till component level using RF and digital measurement tools & equipment.
5. Analyze test data and provide reports on yield.
6. Document test procedures, results, and any issues encountered during testing and debugging.
7. Assist in the development of new RF testing methodologies and best practices.
8. Do simple antenna parametric radiation measurement

Requirements

· Diploma /Bachelor in Electronics or Communication Engineering, or equivalence

· Preferably with at least 2 years of working experience in a product-based electronics manufacturing environment / product development.

Skills, Experiences & Knowledge

· Experience in automating test and measurements using bench test equipment.

· Knowledge of programming software in C, C#, Python or LabView.

· Experience with PCB design software

· Experience in antenna parameter measurement

· Preferably with soldering experience

· Excellent communication and documentation skills.

Inventory and warehouse

1. Monitors and report current inventory levels everyday, investigate and report any discrepancies in inventory records to office if actual store inventory do not tally with computerized records.

2. Inform to office to place order when inventory levels are low

3. Ensures that warehouse is clean and well organized

4. Prepare and load goods to lorry for delivery everyday

5. Receive and unload goods from suppliers (container load)

6. Do quality check for goods receive, reject those defective goods

7. Arrange and organize the goods to warehouse

8. Moves and restructures organization of goods in warehouse to make space for new inventory.

9. Assists in cleaning and organizing the store upon closing.

10. Housekeeping

Standby Driver

1. Delivering Goods (estimated 15 to 25 locations per day)

2. Familiar with Singapore road

3. Ensure goods delivered to customers are in their original good condition

4. Take care of the vehicle - weekly checking and washing

5. Efficient and accurate

6. Service and maintainence of vehicles

7. Loading and unloading of goods

8. Daily route planning

Production

1. Learn to operate the manufacturing machines

2. Clean the machines after use at end of everyday

3. Complete production orders

4. Operation and maintenance of rewinding, slitting machinery

5. Prepare production report everyday

a) Dissemble various types of aircraft components

b) Perform trouble shooting, assembly, inspection and testing of aircraft components

c) Perform minor rework or call out the relevant repair scheme

d) Read and understand CMM, Service Bulletins, Standard Practices or other relevant Airworthiness Data

e) Complete the documentation and records for each component and where applicable, sign and stamp each stage of the work performed

f) Release of components to service

g) Proficient in most of the requirements for multiple products

h) Cost conscious and have a sense of urgency to complete jobs by stipulated deadlines

i) Ability to work in various areas of the shop, uses sound judgment and is a team player

j) Accept ownership for the work assigned to him and perform his job in a safe and proficient manner

k) Able to work independently with minimum supervision and possess basic problem solving skills

l) Aid in the maintenance of his personal work area, the workshop and shared facilities and equipment

m) Participate in the Continuous Improvement projects in Customer Service Department (methods) to promote efficiency and productivity.

n) Comply with all health, safety and environment (HSE) regulations as prescribed by law and company’s policies.

o) Actively participate and contribute to HSE initiatives & Corporate HSE programs and in HSE risk communications & mitigations.

p) Any other duties assigned.

Production Planning and Execution:

• Overseeing the entire production process from start to finish.
• Developing and implementing production schedules and timelines.
• Ensuring the availability of necessary resources (materials, equipment, personnel).
• Monitoring production progress and identifying potential bottlenecks or delays.
• Implementing quality control measures to ensure products meet specifications.

Cost Control and Efficiency:

• Monitoring production costs and identifying opportunities for cost reduction.
• Optimizing production processes to improve efficiency and minimize waste.
• Exploring and implementing new technologies or methods to enhance productivity.
  

Industry Best Practices:

• Staying abreast of industry trends, best practices, and technological advancements in construction and design.
• Adhering to relevant safety regulations and quality standards.
  

Collaboration and Communication:

• Collaborating with other departments (e.g., design, procurement, sales) to ensure smooth project execution.
• Communicating effectively with stakeholders (e.g., clients, suppliers) regarding production progress and any potential issues.
  

Continuous Improvement:

• Identifying areas for improvement in production processes and implementing necessary changes.
• Providing recommendations to management on how to enhance production efficiency and quality.
  

Job Description

· Cutting and Crimping of wires

· Inserting of connectors and housing

· Assemble components to form wire harness according to customer’s specifications

· Ensuring quality in process is observed

· Re-work defective wire assemblies

· Any other duties assigned from time to time

Requirements

· Good eyesight as some components are small

· Not color blindness for identify colored cable and label

· Understand basic English to read drawing and cutting lengt

Basic start $2600, after 3 months confirmation is $2700. Have OT pay.

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Communicating with other team members to solve problems.
• Conduct / perform training to employees to improve GMP / international standards certification awareness and compliance.
• Other duties as and when assigned by management.

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Primary

1. To Provide primarily support at production department.
2. Assist superiors in prepare and compile reports.
3. Prepare, generate and release job order / purchase requisition to various departments of the confirmed job orders.
4. Responsible for planning of production output, monitor machine capacity, OEE etc.
5. Work closely among inter-departments to ensure committed schedules are met.
6. Provide regular update to the sales/Projects team on project development in a timely manner.
7. Maintenance and upkeep records of Production/Engineering/Technical documents.
8. Arrange production run according to Supervisor/HOD instruction.
9. Receiving/distribution of raw material for production usage.
10. Parts distribution to other departments for next process.
11. Able to systemize and improve on workflow.
12. Good application and know-know on the ERP / reporting tools.
13. Ability to understand or interpret all technical drawing and part specification.

Education level:

1. Min. NTC/Nitec level ME/Mechatronic or its relevant.

Experience level:

1. Two (2) years in relevant experience in clerical environment or manufacturing or its relevant

2. Perform competent in clerical duties, computer literacy.

3. Result oriented, resourceful and independent.

4. Ability to read, understand mechanical drawing and Geometric Dimensioning and Tolerance.

Job Description & Requirements

1. Formulate and provide directives for Production Department in meeting organization's goals and committed to Quality Management System.
2. Accountable with the assigned factory sections in terms of production, New Model Development, Customer Service and Support, Supplier and Materials Management, Logistics and Transportation.
3. Analyze section profit/loss of projects and providing cost control and cost effectiveness strategy.
4. Provide production & material planning in ensuring production efficiency and on time delivery.
5. Ensure effective control of machine up/down time and well scheduled and optimized planning in machine / work-center load.
6. Manpower balancing and deplaoyment strategy with manpower skill set.
7. Continuous improvement program to ensure productivity, cost and quality effectiveness, general housekeeping and safety.
8. Formulate, identify and conduct management / training workshop to initiate / facilitate staff in aligning organizations missions and objectives and actions plans.
9. Support other function activities within the company to achieve the overall business goals and objectives.
10. Implement process improvement.
11. Authorize the appropriate use of performance monitoring and statistical techniques.
12. Ensure and coordinate the implementation of risk assessment and risk contol of medical devices.

Requirements:

• Preferred to have Diploma / Degree in Mechanical / Precision Engineering or equivalent.
• Minimum 6 years in a Manufacturing environment (preferably in Precision Engrg / Sheet metal industry) and with at least 4 years of supervisory capacity.
• Exposure with involvement in newly factory, product / process set-up is much preferred.
• In-depth understanding of manufacturing cycle and good budgeting control.
• Strong leadership with good analytical and problem solving skill, as well as dynamic in planning and result oriented.

Job Description:

• Review and Study customer's specifications and drawings
• Set up machines and create samples
• Update sample making records
• Assist in new product development
• Create and maintain jigs and fixtures
• Assembly of wire harness and Electromechanical parts
• Any other duties assigned from time to time

Requirements:

• Good eyesight as some components are small
• Not color blindness for identify colored cable and label
• Understand basic English to read drawing and cutting length

Job Types: Full-time, Permanent

Schedule: Monday to Friday

1. Able to handle meats processing, including chicken and pork, on daily basis to meet customers requirements

2. Able to work with little supervision

3. Willing to work at Bedok North (Gourmet East Kitchen) manufacturing facility and be prepared to be deployed on 6 days workweek.

4. Able to work in cold room temperature to process and pack meat items.

5. Ensure required workplace safety and hygiene standards are followed.

Requirements

1. Candidates will need to handle different types of meat and food items, depending on our customers orders.

2. Physically fit as work involved manual labour too.

To know more on the food items we sell, please check out our online marketplace portal, https://www.perfectfood.sg/.Only shortlisted candidate will be contacted.

Responsibilities :

• Perform electrical and electronic conceptual details design work.
• Responsible for the analysis, definition, design, construction, testing, installation, modification, and maintenance of automated machines, containing software as the major component.
• Writes new machine program, makes modification to existing machine software, or integrates software application.
• Creates and executes until testing and integration testing ensuring machine software meets requirements.
• Identify, define and implement the technical architecture for use of auto visual inspection in our product within budget and schedule.
• Review electrical and electronic documents/drawings.
• Creates, reviews, and maintains all required technical documentation/manual related to assigned software to ensure supportability and reuse.
• Participate in project planning sessions with team members to analyze development requirements.
• Reviews project work with the team, included the machine design engineers and engineering engineers.
• Provide timely status updates for areas of individual responsibilities within projects to superior.
• Provides technical support to operations or other development teams.
• Overall responsibility for technical issues and coordinate with other disciplines.
• To participate in the continuous improvement programs to explore ways and means to improve production efficiency and reliability.

Requirements :

• Bachelor's Degree in Electrical, Electronics Engineering with min one (1) years of relevant experience.
• Experience working with vision system database.
• Knowledge of camera, light, and lens selection for applications ranging from defect detection to part location.
• Programming background with high-level languages such as Visual C# WPF, C++ and Python.
• Experience in developing vision system with Halcon and Opteon camera.
• Good knowledge in Machine Vision programming and experiences.
• Good experience on automation controls, motors & sensors like PLC, CTC, Beckoff PC and controllers, Servo & Stepper motors.
• Familiarity with wiring/cabling size/terminations and load/temperature requirements.
• Familiarity with industrial machinery design.
• Skilled in the utilization of statistical analysis.
• Required to travel regionally (average 20% of the time).
• 5 days work week.
• Transport pick-up at Bedok MRT station.

JOB SUMMARY

Responsible for the development and delivery of a wide range of state-of-the-art products for global markets, from invention to mass production.

JOB RESPONSIBILITIES

• Perform design of electro-mechanical subsystems, micro-mechanisms and transmission systems
• Work with the Manufacturing team and part suppliers throughout the product cycle in a fast-paced environment
• Coordinate Fabrication and Assembly of prototype designed and pilot run articles
• Perform FMEA & carry out other design simulation required
• Review and evaluate vendors for performance
• Use computer-aided design software to create 2D technical drawings from 3D files
• Handle assignments under minimal supervision and tight schedule
• Participate in project meetings and conference calls with customers
• Discuss with customer on:

- Dimensions, tolerances and material requirements

- Critical/functional area

- Assembly and inspection methods

- Purchased parts with specific brands or models

- Aassembly drawing and BOM lists

- Revision to technical drafts based on the discussion

- Work with customers regarding accuracy, drafting standards and documentation

- Review drawings for completeness and accuracy

- Prepare engineering documents for submission to customers

- Maintain all revisions of project drawings, update and maintain drafting log

- Assist and provide all information to Sales team for quotation submission to customers

- Provide timely technical assistance and solutions to Production team

- Perform any other duties as assigned by the Company

JOB-RELATED SKILLS

• Good team player with strong passion for design
• Proficient in using CAD tools like Solidworks and other simulation tools
• Simulation tools & programing skills (eg. Python) is added advantage
• At least 2 years experience
• Experience working in a metal fabrication shop or similar environment will be added advantage

Job Description:

• Corporate with the constrcution manager to connect with various government acceptance departments.
• Corporate with the constrcution manager to supervise and manage the site to meet the various goals of the project.
• Corporate closely with subcontractors to monitor the progress of small towns and coordinate the work resources required by subcontractors to meet project requirements.
• Corporate with goverment personnel to conduct on-site inspections.
• Participate in weekly or monthly meetings with subcontractors to discuss work progress and corperate in preparing monthly meeting progress reports.
• Establish good relationships with all relevant parties.
• Corporate to ensure site safety and comply with the requirements of the authorities.
• Corporate to organize relevant physical and electronic documents on site engineer, etc.
• Other tasks assigned by the manager.

Requirements & Qualifications:

• Diploma / Degree or above preferably from a recognized University accredited with PEB, Singapore
• Experience with public residential projects would be advantages
• Proficient in Microsoft Office / Projects, AutoCAD
• Ability to keep a positive attitube in a fast-paced environment
• Good team player

Job Description:

• Corporate with the constrcution manager to connect with various government acceptance departments.
• Corporate with the constrcution manager to supervise and manage the site to meet the various goals of the project.
• Corporate closely with subcontractors to monitor the progress of small towns and coordinate the work resources required by subcontractors to meet project requirements.
• Corporate with goverment personnel to conduct on-site inspections.
• Participate in weekly or monthly meetings with subcontractors to discuss work progress and corperate in preparing monthly meeting progress reports.
• Establish good relationships with all relevant parties.
• Corporate to ensure site safety and comply with the requirements of the authorities.
• Corporate to organize relevant physical and electronic documents on site engineer, etc.
• Other tasks assigned by the manager.

Requirements & Qualifications:

• Diploma / Degree or above preferably from a recognized University accredited with PEB, Singapore
• Experience with public residential projects would be advantages
• Proficient in Microsoft Office / Projects, AutoCAD
• Ability to keep a positive attitube in a fast-paced environment
• Good team player

Reporting to the Flow Manager, he/she will be responsible for driving and meeting product reliability and improving product yield.

Job description

- Prepare and submit concessions to OEMs for out-of-scope repairs.

- Liaise with OEMs on technical queries or any other matters as

required.

- Provide technical support and leadership to the shop floor, as well

as to various sections requiring engineering inputs.

- Support shop floor on modification of existing fixtures and

designing of new ones.

- Ensure that all matters pertaining to product or process are

managed efficiently.

- Ensure that all the technical problems are resolved in a timely

manner, hence enabling smooth operation and production

- Liaise with Marketing & Customer Service Department to ensure

that all technical requirements set out by the customers are met.

- Carry out feasibility studies for new capability setup as well as

initiate and carry out the set up.

- Set up new specification capability on existing special processes.

- Review special processes requirement for new product part

number / CMM.

- Set up new Equipment / Machine or modify existing set up for

increase in capacity.

- Conduct investigation and issue warranty reports

Perform process nonconformance gap analysis.

Create and maintain necessary shop documentation to ensure compliance with CMM & other specification revision:

- Overhaul Routers

- Lot Sheets

- ICR

- Bushing Installation Sheets

- OHRW Assembly/ Dis Assembly Worksheets

- OHRW Process Sheets

- Plating Data Sheets

- Plating Masking Data Sheets

- NDT technique sheets

- Procedures

- Forms

Candidate skills & requirements

- Knowledge of MS Words, Excel & PowerPoint

- Project Management

- Special process knowledge

- Robotics programming is a plus

- CAD experience is a plus

Roles & Responsibilities

The Site Engineer (Building) is responsible for assisting on the progress of site works and manpower related aspects of the project.

The responsibilities of this position are, and not limited to, as follows:

• Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Adherence to safety practices in the work place.
• Any other duties that may be assigned to you from time to time as your superior / management deem fit.

Qualifications and Education Requirements

• Education: Degree in Civil Engineering from a recognized University
• Experience: Prior 3 years experience in building projects

Position Summary

You are responsible to assist Snr Engineers and/or Project Manager in production, assembly, design and development of hardware and equipment the Company’s products. The job also involves sourcing of components, participating in technical design, assisting the Snr. Engineers and/or Project Manager in budgeting, scheduling, management of contractors, and installation, deployment and maintenance of the products in an operational environment (on-site when required).

Main Responsibilities

• System set-up; troubleshooting, resolution of anomalies discovered in equipment and methods, provision of assistance in maintenance service
• Installation of equipment room racking, servers and UPS. cable works for power and communication
• Installation and maintanance of electrical and Instrument equipment
• Installation, configuration, testing and maintenance of operating systems, application software and system management tools. Ensuring the highest levels of systems and infrastructure availability and security.
• Assistance in managing and monitoring all systems and infrastructure.
• Under the guidance of a Snr. System Engineer or Project Manager, collation of information on hardware systems, costs of development, work program and technical specification
• Participation in the development and testing process, systems testing and commissioning
• Provision of support of design and installation of ‘turnkey’ and / or ‘user-defined’ system
• Sourcing and identification of suppliers for evaluation
• Conduct of preliminary assessment on systems requirement of the clients and matching with components recommended by sub-contractors
• Provision of assistance in systems deployment, system implementation and / or installation
• Performance of corrective, preventive maintenance work in-house or at customer site (on-site)
• Implementation of enhancement/upgrades as instructed
• Preparation of documentation and logistics support where necessary
• Travelling maybe required from time to time

Skills and Experience

· Minimum 2 years hands-on experience in electrical and electronic system set-up, installation, servicing, troubleshooting, and maintenance

· Strong debugging skills

· Strong team work as well as able to work independently

· Well-versed in:

Micorsoft Windows Server and Desktop Operating Systems

Microsoft Office

Single-Line Diagram

Electrical Drawings

· Experience in:

Hands-on Unit Testing

Hands-on Integration Testing

AutoCAD

Network Diagrams

Project Management

· Competency in:

IT Network installation, configuration, and administraton

IT Systems installation, configuration, and administraton

· Knowledge of:

Cyber Security concepts and implementation

iOS and Android platforms

Microsoft Project

Minimum Qualifications

· Min. Diploma in Electrical or Electronics Engineering, or equivalent practical experience

· Practical experience in:

System set-up, installation, servicing, troubleshooting, and maintenance

Attributes

· Critical thinking and problem-solving skills

· Strong interest and awareness of new technologies

· Proactive with good time-management skills

· Good interpersonal, analytical and communication skills;

· Ability to:

Multi-task, prioritize activities, work independently and calmly under pressure

Interact positively, clearly and professionally with peers, customers and vendors

Anticipate and take proactive actions

The Ideal Candidate

· You possess big picture thinking, a willingness to learn, dive into unfamiliar systems and resolve complex issues both from a business and technical perspective

Salary Range

· SGD 3.0k – SGD 4.5k

Job Description:

• Responsible for on-site technical and engineering matters.
• Supervise & coordinate day-to-day site works, including sub-contract works, safety and quality control.
• Site inspection & upkeep site record.
• Liaise with consultants, client etc.
• Other duties assigned by Site Manager / PM.

Requirements & Qualifications:

• Graduate Bachelor in Engineering (Civil) or equivalent.
• 3-5 years work experience in Building Construction.
• Able to work independently.
• Autodesk Revit MEP experience will be an advantage

JOB DESCRIPTION

• Provide coordination, supervision, and leadership responsibilities for the repairs and maintenance of all Mechanical & Electrical equipment, engineering services, building installations, and facilities.
• Review the irregularity observed during the shift and discuss the corrective actions/preventive actions with the Chief Engineer.
• Conduct shift briefing on maintenance, control processes, and procedures stipulated in the Engineering Plan Manual.
• Review critical daily and weekly events of the Guestrooms and F&B Banquets to ensure that engineering support actions are taken or are being taken as planned.
• Inspect the works carried out by contractors and ensure that they work in accordance with the procedure stipulated in the service contract agreement.
• Conducting routine checking on all Mechanical & Electrical Services in accordance with the Engineering Maintenance Programmes.
• Monitor and ensure that all maintenance programmer activities are carried out as planned.
• Prepare the Engineering Checklists and work request forms for shift staff to conduct routine servicing & maintenance on all Mechanical & Electrical Services in accordance with the preventive maintenance plan.

JOB REQUIREMENTS

• ITE or NTC-2 with minimum 6 Year(s) of working experience.
• Diploma with 4 years of working experience.
• Sound knowledge in Building Services and Project management.

BENEFITS

• Company Transport / Uniform / Duty Meals / Medical & Dental Coverage provided
• Employee Discount Rate for F&B Dine-In and Hotel Room Stay Globally
• Learning & Development Opportunities and Staff Recognition Awards

Job Description:

• Corporate with the constrcution manager to connect with various government acceptance departments.
• Corporate with the constrcution manager to supervise and manage the site to meet the various goals of the project.
• Corporate closely with subcontractors to monitor the progress of small towns and coordinate the work resources required by subcontractors to meet project requirements.
• Corporate with goverment personnel to conduct on-site inspections.
• Participate in weekly or monthly meetings with subcontractors to discuss work progress and corperate in preparing monthly meeting progress reports.
• Establish good relationships with all relevant parties.
• Corporate to ensure site safety and comply with the requirements of the authorities.
• Corporate to organize relevant physical and electronic documents on site engineer, etc.
• Other tasks assigned by the manager.

Requirements & Qualifications:

• Diploma / Degree or above preferably from a recognized University accredited with PEB, Singapore
• Experience with public residential projects would be advantages
• Proficient in Microsoft Office / Projects, AutoCAD
• Ability to keep a positive attitube in a fast-paced environment
• Good team player

Electronics Engineer Responsibilities:

• Designing, inspecting, testing, and updating electronic systems, components, equipment, and software.
• Liaising with engineers, other professionals, as well as clients to ensure quality projects are completed to specifications.
• Ensuring all equipment and products meet health and safety regulations.
• Observing existing processes and making recommendations for improvement.
• Developing effective maintenance, testing, and quality control procedures.
• Showing initiative and keeping up with advancements in Electronics.
• Representing the company at conferences and delivering presentations if required.
• Monitoring processes, systems, and staff, and punctually identifying problems.
• Establishing relationships with staff, vendors, suppliers, and other professionals in the field.
• Writing specifications, instructions, reports, and handling other required administrative duties.

Electronics Engineer Requirements:

• Bachelor's degree in engineering or similar.
• Master's degree preferable.
• A relevant license may be required.
• Practical experience with design software.
• Experience in design recommended.
• Excellent problem-solving and troubleshooting skills.
• Strong written, verbal, and telephonic communication skills.
• Excellent research and interpersonal skills.
• Strong analytical skills.
• Willingness to work overtime if required.

Electrical Engineer Responsibilities:

• Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.
• Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.
• Conferring with customers, engineers, and others to discuss existing or potential engineering products or projects.
• Ensuring that installation and operations conform to standards and customer requirements by preparing electrical systems specifications, technical drawings, or topographical maps.
• Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.
• Ensuring compliance with specifications, codes, or customer requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.
• Writing reports and compiling data regarding existing and potential electrical engineering projects and studies.
• Preparing specifications for purchases of electrical equipment and materials.
• Supervising or training project team members.
• Estimating material, labor, or construction costs for budget preparation.
• Maintaining electrical equipment.
• Working with a variety of technicians.

Electrical Engineer Requirements:

• Bachelor's degree in electrical engineering degree from an accredited school.
• Licensed as a professional engineer.
• Experience in using or a desire to learn the required software.
• Knowledge of applicable codes related to electronic engineering.
• Proficient in design and calculation software.

The BMS Engineer deployed on site is required to perform planned and ad-hoc maintenance works including supervise the Technicians and Contractors in carrying out the works in specific projects. The BMS Engineer should also possess good communication skills and be able to relate to different levels of people. The BMS Engineer should also be proactive in learning and implementing of new technologies on site. The BMS Engineer will also be holding a concurrent role of TE and will discharge his/her duty accordingly to the requirement of the BMS Engineer.

What you will be doing:

• Perform maintenance services and supervise contractors / vendors in the delivery of equipment.
• Assist in implementing the quality maintenance program and complying with government/statutory regulations
• Assist in managing minor projects or improvement works or repair & replacement (R&R) works and supervise the works
• Prepare and justify for variation of works
• Ensure that works are completed on time and as per contract requirements
• Establish good relations between own team members and building owners
• Ensure all fault cases are promptly followed up and closed in the CMMS / Helpdesk
• Work closely with Client’s FM team to understand the needs and requirements of the end users
• Undertake any other duties as assigned by the Client/ESS team
• On daily basis, follow up on anomalies or faults detected from the use of the BMS to optimize the building equipment;
• Deep dive into building function and equipment to improve energy efficiencies and eliminate intermittent faults, derive new fault rules specific and relevant to the Sites; and
• Manage, operate, configure, modify and perform troubleshooting on the BMS system.

You are:

• Possess a diploma in Building, Facilities, Engineering or relevant disciplines from a recognized establishment with a minimum 3 years of relevant working experience in BMS.
• Minimum of 5 years of relevant working experiences in facility management works
• Trained in Building Management System
• Fluent with Microsoft Office

Why join Cushman & Wakefield?

As one of the leading global real estate services firms transforming the way people work, shop and live working at Cushman & Wakefield means you will benefit from;

• Being part of a growing global company;
• Career development and a promote from within culture;
• An organisation committed to Diversity and Inclusio

We have a vision of the future, where people simply belong.

That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, gender, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status. We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us.

Job Description:

• Report to the Senior Project Manager/Project Director
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation, and execution of works on-site
• Coordination, supervision & monitoring of the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor and suppliers on all project implementation issues and attend site meetings when required
• Coordinate all submissions
• Produce weekly site progress reports and necessary submissions
• Attend meetings, and conduct site inspections on work progress to ensure quality control by authority requirements.

Job Requirement：

• Degree in Engineering or equivalent
• At least 3 Years of working experience in the related field is required for this position
• Experience in reinforced concrete building and architectural design is an advantage
• Able to work well under pressure
• Independent with good communication skills
• Good organizational and planning skills
• Effective communication, coordination skills, and teamwork
• Able to work 6 working days
• Able to work overtime/shift rotation

Job Description

• Review, update and maintain Quality Management System procedures.
• Verify & ensure process documentation compliance; Work Instruction, Quality Inspection Plan, Date Sheet & Inspection Reports, etc.
• Lead & guide QC Inspectors in ensuring work compliance.
• Oversee in-process and outgoing quality inspections and work with internal team teams to resolve quality issues in daily manufacturing process.
• Responsive towards resolution of process non-conformance.
• Follow up customer complaints by communicating with internal teams for containment actions, root cause analysis, corrective and preventive actions.
• Managing documentation control system, as well as audits (Internal/external).
• Ensure Customer environmental survey and other relevant requests are completed in a timely and orderly manner.
• Support QA/QC activities, assisting in projects when required & providing additional support when necessary.
• Any other ad-hoc duties as assigned.

**Successful candidate will be provided on-the-job training

Job Requirement

• Minimum Diploma/Degree in Quality Management/Mechanical/Manufacturing Engineering/Chemistry/ Chemical Engineering or equivalent.
• Min 1 year related working experience in manufacturing settings.
• Min 1 year of experience in Quality / Supplier Quality in a manufacturing environment working in a ISO regulated environment.
• Knowledge in ISO 13485, ISO 9001 and ISO 14001.
• Team player with good working attitude.
• Able to start work immediately.
• Comfortable to work at East area, Changi South.
• Entry level are welcome to apply.