Role and Responsibilities

• Setup tester for Silicon Photonics wafer level testing, including prober recipe generation for new devices, instrument loss / RF calibration, Electrical probes and optical fiber interface swapping and cleaning
• Discuss with customers for test requirements and design test flow and setup test program to meet customer requirement.
• Test result verification and analysis.
• Perform wafer surface inspection before and after test
• Cleanroom housekeeping and maintenance
• Liaise with vendors for instrument maintenance
• Work with team members for development of new Silicon Photonics Test Capabilities

Qualifications and Education Requirements

• Degree in Microelectronics/Electrical/Electronic Engineering.
• Candidate with >3 years’ experience in Silicon Photonics testing or RF bench testing or ATE wafer test experience will be considered for senior position.
• Proficient in Python and C++ is added advantage.
• Good interpersonal, effective presentation and communication skills.

Additional Attributes

• Exhibit Initiative, ownership, accountability and a team player.
• Able to perform under a fast paced and challenging environment.
• Demonstrate strong problem-solving skills.

Responsibilities

· To optimize airside equipment selection in order to minimize the cost and enhance winning probability for project tender

· To respond to customers in timely manner on changes in project tender requirement

· To process PO, SO, MSR, etc. into the system

· To enter order to factory with accuracy

· To ensure delivery schedule meets customer’s requirement to align with the sales forecast

· Any other duties as assigned from time to time

· Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements

· Education levels should be Diploma in Engineering or equivalent

· At least 1-2 years of experience in relevant job scopes

· A team player, able to work in a team closely

· Meticulous and has eyes for details with pleasant characteristics

· Good communication skills

Responsibilities

The main duties of the job will be to:

Responsibilities

• Interpret technical drawings from clients
• Develop and execute QAQC plans, inspection and test plans as well as procedures according to client’s requirement.
• Coordinate all project testing, inspection activities and buyouts by client, third party inspectors and ensuring compliance to project specification.
• Perform inspection when needed
• Prepare and ensure that final documentation report submission is as per customer’s requirement.
• Attend to certification audits, customer periodic audits, review meetings and visits.
• Work closely with welding engineer on resolving non-conforming issues.
• Communicate engineering/technical/quality requirements to the team.
• Assist in developing the Quality Management system by establishing procedures, plans and work instructions as needed
• Support QAQC activities in other overseas subsidiary.
• Training aspect in this job required as you will be required to conduct some classroom and on-the-job training in the above areas.

Requirements

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Mechanical), Engineering (Metal Fabrication/Tool & Die/Welding), Engineering (Petroleum/Oil/Gas) or equivalent.
• At least 3 Year(s) of working experience in manufacturing or related field is required for this position
• Required Skill(s): Welding, technical drawing, ASME-IX, API, ISO 9001, NACE
• Able to work independently

If you are shortlisted for the position(s), you should hear from us within 30 days of the closing date of the advertisement.

Responsibilities:

• Develop green marine solutions that reduces marine carbon footprint, in line with company business objectives.
• Hands on in setting up of test lab to enable development and testing.
• Perform PLC software and algorithm development for electrical propulsion solutions.
• Generate documentation of software architecture and logic flow, test procedures, quality control and any other necessary supporting documents.
• Participate and support commissioning of vessels with similar configurations.
• Troubleshoot and resolve any issues related to our delivered solutions that may arise during the vessel commissioning.
• Any other tasks as may be required by supervisor.

Requirements:

• Min engineering degree in relevant discipline
• Strong software development skills particularly in equipment controls
• Strong analytical and troubleshooting skills
• Hands on person
• Team player
• Good communicator and has no problem engaging with external parties
• Knowledge in power electronics, motor drives, marine propulsion systems is a plus
• Fresh graduates are welcomed

Job Description

Role: Quality Engineer (QE)

Position Overview:

The Quality Engineer is responsible for ensuring the quality of construction materials, processes, and workmanship throughout a project. This role involves developing QA/QC documents, monitoring site quality control activities, monitoring compliance with standards, and implementing quality assurance procedures to deliver projects that meet contract, client specifications, international standards, and Singapore regulatory requirements. This role is essential to delivering high-quality, durable, and safe civil engineering projects while maintaining efficiency and minimizing risks.

Key Responsibilities:

1. Take part in developing QA procedures as required by the project Quality Assurance Plan.

2. Develop and/or review QC report templates and checklists as per ITPs.

3. Participate in developing quality training materials per project quality requirements and technical specifications. Conduct quality training for subcontractors’ QC inspectors and site supervisors.

4. Conduct regular checks for site QC activities and QC report completion.

5. Cover day-time site inspections for civil works as per ITPs when it is needed by site situations.

6. Take part in project internal quality audits in accordance with project audit procedures to ensure compliance with company ISO 9001 QMS, and Singapore regulatory requirements. Identify non-conformities and work with project teams to implement corrective and preventive actions.

7. Take part in project external quality audits to subcontractors in accordance with project audit procedures to ensure compliance with subcontract, project specifications, codes, and Singapore regulatory requirements. Identify non-conformities and work with project teams to implement corrective and preventive actions.

8. Regularly monitor project KPIs, and ensure out-of-target KPIs are identified and raised to applicable subcontractors for root cause analysis, in the meantime, report to the QAQC manager.

9. Coordinate with discipline engineers, subcontractors, the client, and third-party inspectors to ensure project quality requirements are met.

10. Take part in preparing mechanical completion documents before commissioning.

11. Prepare the Turnover Package (TOP) at the project ending stage.

Work Environment:

Ø Combination of office and on-site work.

Ø Working overtime may be required, and working at a fast pace.

Requirements for the role:

Ø Degree or Advanced Diploma in Civil Engineering or related engineering field.

Ø At least 6 years of relevant Experience in quality assurance (QA) and QA document development in Singapore for civil engineering projects.

Ø Experience in site quality control (QC) related inspection and tests.

Ø Strong knowledge of construction materials, techniques, and standards (BS EN, SS, ASTM).

Ø Excellent quality problem-solving and analytical skills.

Ø Strong communication and interpersonal skills.

Ø Experience in the CONQUAS process.

Ø Certification in Quality Management (e.g., ISO 9001) is a plus.

Job Description

Role: Civil QC Engineer

Position Overview:

The Civil QC Engineer is responsible for QAQC activities of civil construction works, including materials, processes, and workmanship throughout a project. This role involves quality document review; monitoring site quality control activities; monitoring compliance with standards; and implementing quality control and inspection as per ITPs to deliver projects that meet contract, client specifications, international standards, and Singapore regulatory requirements. This role is essential to providing high-quality, durable, and safe civil engineering projects while maintaining efficiency and minimizing risks.

Key Responsibilities:

1. Take part in reviewing/developing quality documents, such as ITPs, and quality control procedures.

2. Conduct site monitoring for quality.

3. Conduct/witness daily inspection, and sign off inspection report/checklists/test report as per ITPs.

4. Take part in developing quality training materials as per project quality requirements, and technical specifications. Conduct quality training for subcontractors’ QC inspectors and site supervisors.

5. Take part in project external quality audits to subcontractors by project audit procedures to ensure compliance with subcontract, project specifications, codes, and Singapore regulatory requirements. Identify non-conformities and work with project teams to implement corrective and preventive actions.

6. Regularly monitor project KPIs, and ensure out-of-target KPIs are identified and raised to applicable subcontractors for root cause analysis, in the meantime, report to the QAQC manager.

7. Coordinate with discipline engineers, subcontractors, the client, and third-party inspectors to ensure project quality requirements are met.

8. Take part in preparing mechanical completion documents before commissioning.

9. Prepare the Turnover Package (TOP) at the project ending stage.

Work Environment:

Ø Combination of office and on-site work.

Ø Working overtime and or night shift may be required.

Requirements for the role:

Ø Advanced Diploma or diploma in Civil Engineering or related engineering field.

Ø At least 6 years of relevant civil work QC experience in Civil work in Singapore.

Ø Experience in defect rectifications.

Ø Strong knowledge of construction materials, techniques, and standards (BS EN, SS, ASTM).

Ø Excellent problem-solving skills.

Ø Strong communication and interpersonal skills.

Ø Experience in the CONQUAS process.

Ø Experience and Certificate in welding inspection are a plus.

We are seeking a highly skilled and experienced Design Engineer to join our Design team. The successful candidate will be responsible for designing and developing custom mechanical systems and components for Asphalt and Concrete plants, as well as overseeing their fabrication and testing.

Responsibilities:

• Design and develop custom mechanical systems and components using CAD software (e.g. SolidWorks, Inventor, Creo)
• Collaborate with cross-functional teams, including Electrical and Software Engineers, Project managers, and Fabrication Technicians, to ensure successful project outcomes.
• Oversee the fabrication and testing of mechanical systems and components
• Develop and maintain project timelines and budgets.
• Perform research and analysis on materials, components, and systems to ensure optimal performance and cost-effectiveness.
• Participate in project meetings and provide technical expertise and guidance as needed.
• Ensure compliance with all relevant safety regulations and standards.

Requirements:

• Bachelor’s degree in Mechanical Engineering or a related field
• Minimum of 8 years experience in mechanical design and fabrication
• Proficiency in CAD software (SolidWorks preferred)
• Strong knowledge of mechanical design principles and practices
• Experience with the design and fabrication of complex mechanical systems and components
• Strong problem-solving and analytical skills
• Excellent communication and interpersonal skills and the ability to converse and write in English.
• Ability to work independently as well as part of a team.

Job Description

• Manage the company’s projects
• Coordinate between client, company, factory and work site staff
• Work on ensuring good quality and maintain delivery schedules
• Liaise with QA/QC for the third party/client inspections, class survey certification, etc

Requirements

• Degree in structural / marine / naval architecture / civil / mechanical engineering
• Min 4 years of working experience in similar industry
• Good written and spoken English
• Experience in quality assurance and project management, preferably in the construction, marine, or offshore industry
• Leadership qualities expected
• Able to plan and manage project independently
• Come and convince us why you are the best person for the job

Job Responsibilities:

* Project Engineering, Project Planning and Project Coordination for BMS / Environmental / Water Quality System

* Develop detail proposal, specification, project plan and scheduling

* Prepare coordinating, and monitoring the assigned engineering projects

* Attend Project / site site meetings and inspections

* Provide technical support and guidance to the project team members

* Supervise daily activities such as quality, safety and project delivery carried out on site.

* Work closely with the contractors and the authorities for access, task and troubleshoot site issues.

* Manage project and monitor project progress to ensure smooth completion.

* Provide project status update to management accurately and in a timely manner.

* Attend maintenance issues during warranty period.

* Ensure safe work procedures and environmental control measures are implemented at work site.

* Handle project risk management and issues escalation.

* Prepare and manage project costing, proposal and quotations. Sourcing for material and parts

Requirement:

1. Diploma in Mechatronic / Mechanical / Electrical / Environmental.

2. Min. 2 years experience in project engineering and management

3. Possess positive attitude to learn, has initiative and independent

Interested candidates are to forward your detailed resume stating current & expected salary to [email protected].

We regret that only shortlisted candidates will be notified.

Job Descriptions:

* Development & Implementation of IoT Application, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Implementation of IoT, Robotics, Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in IoT implementation

* Knowledge of Building Automation & Process Control

* Experience in IoT, BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in embeded programming, Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

* Willing to travel to overseas on short notice and work after office hour, weekend and public holiday.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Retrofit Engineer

Do you enjoy being part of team that provides high-quality services for our customers?

Would you like to be in a team delivering world class service to our customers?

Be part of a successful Customer Service team

Baker Hughes Valves is a global technology company that designs, develops and manufactures the highest quality, most accurate and reliable control valves and safety valves products, services and solutions to our customers across a large range of process industries.

Partner with the best

As a Retrofit Engineer, you will be in charge of BoM and technical support for Pressure Safety Valves (Consolidated) and Control Valves (Masoneilan). You will also provide a global engineering support focused on Channel Partners and Aftermarket Centers for the selection, repair, maintenance, and replacement of Masoneilan and Consolidated products.

As a Retrofit Engineer, you will be responsible for:

• Executing design and analysis of assigned projects to develop valves meeting customer application needs, specification requirements, complying with local design/product standards.
• Reviewing customer specifications and “translating” customer specification in to order instructions for manufacturing of valves.
• Providing Retrofit solutions, with bills of material, drawing information, test specifications and processing instructions to meet quality and manufacturing requirements.
• Creating the design review process, ensuring accuracy, quality and design for manufacturability goals are met.
• Enabling the use of design tools (like 2D / 3D CAD (SolidWorks / ProE / UG), Excel, and in-house design calculations.
• Engaging with sales to support the quotation activities.
• Identifying, Own and Enable such initiatives which are in line with business objectives.

Fuel your passion

To be successful in this role you will:

• Have a Bachelor's in Mechanical Engineering (or) Equivalent from an accredited uni or college.
• Have a minimum 12-15 yr of experience in an Engineering Design / Analysis /Scientific / Technical Position.
• Have at least 7 yr of Control Valve and/or Safety valve Design Expertise.
• Demonstrate effective communication and interpersonal skills with the ability to work as a team.
• Have knowledge of control valve and/or safety valves including instrumentation and actuator.
• Have good understanding and experience in Valves regarding applications, Material of Construction, Non-Destructive Tests.
• Have experience with ASME B16.34 and PED, 3D design (Solid works/Ansys), mechanical design & tech writing.
• Have basic knowledge of manufacturing processes such as casting, machining, welding or cutting etc.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits

Location: Joo Koon
Employment Type: Full-Time

Our client is looking for a Piping Design Engineer to join our client's team to assist in the execution of various projects, focusing on Fire Protection Systems and Modular Skids. The successful candidate will collaborate closely with project teams to ensure smooth design development, documentation, and project milestones are met efficiently.

Responsibilities:

• Assist the project team in executing various projects.
• Collaborate with cross-functional teams to design and develop Fire Protection Systems and Modular Skids.
• Generate, update, and maintain technical documentation.
• Prepare and develop system P&ID and conceptual general arrangement drawings.
• Ensure coordination and progress of project tasks are on track by attending relevant meetings.
• Prepare drawings using AutoCAD and SolidWorks.
• Perform hydraulic calculations and generate reports.

Requirements:

• Diploma in Engineering or equivalent.
• At least 2 years of relevant working experience in piping design or related fields (fresh graduates may be considered).
• Proficient in CAD software (AutoCAD, 3D SolidWorks, etc.).
• Strong communication and teamwork skills.
• Enthusiastic, eager to learn, and able to work in a fast-paced environment.

------------------------------

Please APPLY NOW with detail updated resume in Microsoft Word Format

(.doc) to and must include the following information:

• Personal Particulars (with short residence address)
• Education
• Work experiences (period of employment & job duty) in point forms
• Reasons for leaving each employment
• Last drawn salary in each employment
• Expected salary
• Earliest work commencement date / Notice period

(We regret that only shortlisted candidates will be notified)

Engineer I (Upstream, cell culture)

Live

What you will do

The successful candidate will apply process engineering knowledge to support technology transfer and ongoing cGMP production of commercial protein biologics processes. Scope of work could include:

• Applies expertise in the successful coordination of multiple, complex, non-routine activities including facility start up, process qualification through to regulatory approval, process performance monitoring, floor support, troubleshooting of unit operations and technology transfer of new processes.
• Must have strong knowledge and understanding of cell culture processes
• Compile and analyze process data using tools such as excel, minitab, JMP, SIMCA
• Verify data in technical reports, spreadsheets and regulatory filings
• Author technical protocols, technical assessments and product impact assessments
• Utilize strong written and verbal communication skills in technical writing and presentations
• Participate/lead in teams and collaborate cross-functionally with representatives from other functions and sites to transfer and support drug substance manufacturing processes
• Organize and conduct meetings. Actively creates, generates, and presents data/conclusions at internal and cross functional meetings
• Be part of digitation of process tech transfer

Win

What we expect of you

Qualifications

· Master’s degree OR

· Bachelor’s degree and 2 years of directly related experience OR

· Associate’s degree and/or 6 years of directly related experience OR

· High school diploma / GED and 8 years of directly related experience

· Experience working with commercial manufacture of biologics using single use technology

· Experience related to upstream process development technology transfer, scale-up and ongoing manufacturing of biologics (cGMP). This includes technical support for nonconformance investigations and other commercial support activities.

· Possess basic understanding of regulatory and cGMP requirements

· Able to apply engineering principles and advanced statistical analysis in-order to solve processing issues and evaluate opportunities for process improvements

· Able to elevate relevant issues to project lead and line management

· Independently motivated but also work well in team environment

· Excellent written and verbal communication

Your selection for this role will be subject to fulfilling the medical requirements of this job scope. If so, you will be informed of the medical check(s) that you may need to undergo. All medical related expenses incurred from this medical check shall be borne by the company.

Thrive

What you can expect of us

As we work to develop treatments that take care of others, so we work to care for our teammates’ professional and personal growth and well-being.

• Vast opportunities to learn and move up and across our global organization
• Diverse and inclusive community of belonging, where teammates are empowered to bring ideas to the table and act
• Generous Total Rewards Plan comprising health, finance and wealth, work/life balance, and career benefits

Apply now

for a career that defies imagination

In our quest to serve patients above all else, Amgen is the first to imagine, and the last to doubt. Join us.

careers.amgen.com

Equal Opportunity Statement

Amgen is an Equal Opportunity employer and will consider you without regard to your race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status.

We will ensure that individuals with disabilities are provided a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request an accommodation.

Broad Functions:

To assist Technical Engineering Section Manager in taking charge of the function of managing Technical Engineering & Maintenance activities.

Job Description / Responsibilities:

1. Responsible for Plant Equipment Preventive Maintenance (PM) / Corrective Maintenance (CM) development and implementation.

2. Responsible for Daily PM/CM activities, drawing updates, vendor evaluations, equipment related matters, monitor for new tools & technology and etc.

3. Responsible for old/new technicians' training & development related to technical works.

4. Establish and monitor programs / Key Process Indicators (KPI) maintenance system for critical equipment analysis, and condition monitoring techniques, operating data and etc.

5. Optimize maintenance strategies and cost effective benefits.

6. Responsible for ECR meeting, follow action items & process / Equipment Improvement.

7. Responsible to liaise with the vendors related to technical works, issues & etc.

8. Responsible to establish / maintain standards related to equipment, spare parts & etc.

9. Present and Attend to Equipment troubleshooting if needed, E.g. Technician is unable to solve the problem or find out the root cause.

Requirements:

- Degree in Electrical Engineering or equivalent

- At least 3 years of relevant working experience

- Strong working knowledge of chemical process

- Basic knowledge in PLC / Control

- Familiar with ESH regulations

- Proficiency in Computer literacy

- Good data analysis skills

- A team player who is self-disciplined, Self-disciplined, meticulous, resourceful, Positive Working attitude

- Possess excellent interpersonal and communication skills, tact and a high degree of integrity and strong planning skills.

- Applicants is able to work in Singapore without requiring a work pass.

Responsibilities:

• Assists Project Controls Manager to prepares Project Risk Management Plan.
• Prepares the Risk & Opportunity Register and maintains the same.
• Arranges, manage, and participate in periodic risk reviews, covering both internally within
• Seatrium and externally with Client, contributing to the overall Project Risk Management process.
• Assists to liaise with Procurement to pick the Major Equipment Risks and bring them within the Project Risk Log
• Identify the risk on the critical path and content, mitigate the risk to ensure the project is completed as per timeline.
• Assists Project Services Manager in preparing, collecting and compiling weekly and monthly reports

Requirement

• Degree in Engineering or equivalent
• At least 5 years of relevant working experience.
• Good analytical and problem-solving skills
• Possess good interpersonal and communication skills.
• Able to multi-task and able to work in a fast-paced environment.

Our Address:

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Our Working Hours:

Mon – Thurs: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Responsibilties

• Coordinating all O&M and plant outage activities to achieve safe, reliable and efficient operation of the Power Station
• Supporting and liaising with relevant Asset/Operation departments for long term power station turnaround planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation
• To fully develop and utilize the CMMS for efficient and effective O&M Planning practice and co-ordination with service provider for license management, backup, individual account management and software upgrade
• Fully utilizing the CMMS to ensure all O&M activities and experiences are recorded to comply with Station, legislative and company policy requirements
• To assist fully with and help implement all HSE practices and a Quality Management System as applied to the Power Station
• Perform review on maintenance plans, monthly maintenance report and consolidation of planned and unplanned outage reports
• Review the completeness and organize the filing of departmental documentations
• Additional tasks and responsibilities given by power plant management
• Provide close and constant liaison between operations and maintenance through the individual coordinators
• Provide data expert analysis and advise on maintenance / operations performance
• Responsible to track , safe keeping of the necessary documentation of “ Management of Change” and ensures the process is closed and updated the changes in CMMS & O&M manuals accordingly
• Preferably with MAXIMO, SAP & PREMAVERA and Microsoft project experience
• Organizing the meetings with 3rd party vendors & MMA( Major Maintenance Agreement) meeting

Job Requirements

• Degree / Diploma graduate in relevant engineering field
• Knowledge on operation and maintenance activities of Combined Cycle Power Plant
• Knowledge on project management and resource planning
• Knowledge in maintaining maintenance record in CMMS
• At least 2 years of relevant working experience in Power Plant Maintenance ideally on a CCPP (any manufacturing industry)
• Experience involvement in technical aspects of Power Plant operation and maintenance
• The post holder shall be medically fit and able to undertake the duties of the post and any additional duties as detailed in the Power Station Emergency Response Plan
• Plant availability, plant reliability, work order performance and outage duration
• Administrator for Power Station CMMS system
• Work in all areas of the plant site (both indoor & outdoor environment)

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Advanced Networks & Sensors

Our Advanced Networks & Sensors business specializes in platform digitalization, advanced connectivity, and cutting-edge manufacturing. This diversity of capabilities presents a range of roles through which you can contribute to the development of innovative, secure, and patented products. Join our team and play a crucial role in developing tomorrow’s technology and connectivity solutions and services to sectors spanning defence, public security, government, and the commercial realm. Your work will have a global impact as we empower customers through advanced communications, intelligent sensors, and the deployment of AI-enabled Edge applications for mission-critical roles.

Together, We Can Make A Significant Impact

You will be a key technology partner to our customers in the Defence and Public Security sector to thrive on developing the next breakthrough technology in Electro Optics surveillance and Laser systems. Working closely with the Solution Architect, Project Manager and Technical Lead, you will be part of a development team to develop, test and deploy systems as part of an overall project implementation.

Be Part of Our Success

• Design and develop electrical and electronics for Laser and Electro-Optics systems
• Perform engineering calculations and prepare engineering drawings for Lasers and Electro-Optics systems
• Test and diagnose the prototype hardware integrated with firmware or software before final system testing and integration
• Generate and maintain design documentation
• Provide engineering support on technical issues

Qualities We Value

• Knowledge in electrical circuitry and wire harness design
• Knowledge in discrete and digital electronics circuitry design
• Exposure in C/C++/Visual C Programming Language
• Exposure in FPGA firmware programming using VHDL will be advantageous
• Team player with strong creativity and analytical skills
• Working location is in Ang Mo Kio
• Singaporeans only

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated
• Meaningful work and projects that make a difference in people’s lives
• A fun, passionate and collaborative workplace
• Competitive remuneration and comprehensive benefits

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Advanced Networks & Sensors

Our Advanced Networks & Sensors business specializes in platform digitalization, advanced connectivity, and cutting-edge manufacturing. This diversity of capabilities presents a range of roles through which you can contribute to the development of innovative, secure, and patented products. Join our team and play a crucial role in developing tomorrow’s technology and connectivity solutions and services to sectors spanning defence, public security, government, and the commercial realm. Your work will have a global impact as we empower customers through advanced communications, intelligent sensors, and the deployment of AI-enabled Edge applications for mission-critical roles.

Together, We Can Make A Significant Impact

You will work with a team with technical expertise working alongside engineers. You will ensure on contractual fulfilment, customer satisfaction & operational excellence within your domain.

Be Part of Our Success

• Providing 1st level / 2nd level support to end-users in troubleshooting and resolving of desktop PC, servers, network problems. Perform IMAC for computer setup
• Provide overall system administration and maintenance support for domain environment
• Take ownership of all the calls coming to service desk until the case is closed
• Provide Monthly report to supervisor / manager
• Regular housekeeping of all in house systems and operating procedures
• Review systems regularly to improve and streamline work processes
• Perform overtime as and when it requires
• Any other tasks as and when assigned by the reporting supervisor / manager

Qualities We Value

• Knowledge on basic LAN/WAN networking infrastructure is a must
• Knowledge of domain knowledge, enterprise applications is an advantage
• Able to troubleshoot and resolve all technical problems with minimum supervision
• Able to provide Helpdesk level support over phone / email / onsite / Incident Mgt System
• Experienced in installation, setup, configuration, migration, upgrading and maintenance of server, desktop PC, OS, software and related peripherals
• Have good communication skills, be meticulous and organized in your work and be able to work well with tight deadlines
• A good team member
• This is a 1 year direct contract
• Working location is in Jurong East

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated
• Meaningful work and projects that make a difference in people’s lives
• A fun, passionate and collaborative workplace
• Competitive remuneration and comprehensive benefits

Job Descriptions:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist for tender team.
• Research on the application and construction technology of new materials.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Calculation and design optimization of offshore photovoltaic structures.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Report on work progress during meetings.

Job Requirements:

• Preferably with a Degree in Engineering or related studies.
• Tender experience is preferable.
• Minimum 6 years of design engineering experience.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Act as team player.

Responsibilities:

• Manage and oversee day-to-day construction management of project

• Monitor and report to Senior / Project Manager of project progress versus baseline,

including issues and risks in a timely manner

• Conduct VSCC and take charge of ship work safety and cleanliness

• Liaise with trades on the activities and construction effort needed to achieve progress safely, within schedule and budget

• Plan, develop and organize the construction effort to formulate the most cost-effective plan

to support schedule and cost

• Ensure all changes to specifications, work scope and drawings are documented

• Review man hours and duration forecasts to completion and resource requirements

• Monitor construction productivity and schedule performance and investigate reasons for less than satisfactory performance

• Manage schedule, cost-to-completion (CTC) and POC together with Senior / Project Manager

• Conduct progress meetings to manage issues

• Responsible for planning, scheduling and costing

• Support in project tender when called upon or any other adhoc project duties as required

• Handle warranty issues

• Manage customer expectations at site and maintain good customer relationships

Requirements:

• Diploma/Degree in Marine/Mechanical/Naval Architecture
• Preferably possess 1 years experience in newbuild or ship repairs related projects
• Completed Ship Repair Manager Course
• Project Management Skills in the following areas: Planning scheduling and costing, Risk management, Manpower management, Customer Relationship management.
• Able to deal and communicate with people effectively at all levels on the ground, identify and manage issues, cost consciousness and urgency to get things done
• Familiarity with project management software such as Primavera or MS Projects will be advantageous
• Able to work on weekends based on project needs
• Only Singapore Citizens will be considered for this role

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Job Description:

• Ensure incoming equipment meet the purchase specifications
• Arrange for protection and maintenance of equipment and system
• Review the commissioning work processes to enhance efficiency and productivity
• Review the commissioning work processes to enhance efficiency and productivity
• Coordinate with all sections for testing / commissioning requirements with different stakeholders and arrange for facilities and instruments for the job

Job Requirement:

• Degree/ Diploma in Naval Architecture/ Civil/ Marine & Offshore/ Mechanical / Electrical / Chemical Engineering / Certificate of Competency (Marine Engineer Officer) Class 1 (Motorship), or its equivalent
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position
• At least 4 years of relevant experience for Engineer position, and 6 years of relevant experience for Senior Engineer position.

Working hours & locations:

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon to Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte Ltd and our group of companies, shall be used for the purposes of evaluation and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Responsibilities

· Create firmware specifications based on design rules, internal processes, and product/system requirements.

· Specify, design and develop signal processing algorithms, write codes for mircocontrollers in new and customized industrial sensors and HMI products

· Create and conduct review on test methodologies, validate design performance to specifications, debug embedded software, and document final design.

· Support production implementation in the embedded software perspective

· Collaborate with cross functional teams to sustain product lifecycle including customer complaints, failure analysis, etc.

· Liaising with Headquarter on the technical support and technology transfer.

· Verify regulatory compliance with support from head office.

Job Requirements

· Master / Bachelor in Electronic / Computer Engineering or equivalent.

· Minimum 3 years relevant experience in embedded software design and development.

· Strong knowledge and direct experience with C & C++ programming languages.

· Strong knowledge on digital electronics hardware including I2C, SPI, UART, PWM, ADC, USB, etc.

· Experience in designing, coding, debugging and validating on ARM Cortex microcontrollers are preferred.

· Knowledge on Python & Matlab would be advantage.

· Logical and strong interpersonal with analytical skills, strong team player and independent.

· Creative, self-driven and willing to acquire new skills and grow himself/herself.

Responsibilities:

• Develop/update hull material, architectural outfitting specifications and weight and centre gravity (W&CG) study.

• Coordinate/execute contract specification requirements and production inputs into engineering drawing/document.

• Prepare bill of material, review and selection of materials.

• Provide progress reporting and schedule management of engineering deliverables.

• Perform site visits to rectify engineering issues, determine existing conditions or verify new construction.

• Coordinate work and integration with other engineering disciplines, production, QA/QC and clients.

• Meet with vendors, client reps, accreditation representatives when required.

• Perform any other tasks as may be assigned by the supervisor.

Requirements:

• Minimum 5 years working experience in a marine/offshore industry either with shipyards or marine equipment manufacturers.

• Minimum Diploma or Bachelor's Degree in Structural Engineering or Marine Engineering.

• Ability to understand and perform structural analysis of the hull and structures, knowledge of Intergraph-SmartMarine 3D Software will be advantageous.

• Familiar with Marine & Offshore rules, regulations and requirements.

We are a M&E service and fire-fighting maintenance company in Singapore and looking for a Marine Electrical Engineer to work in Singapore:

1) Minimum 5year of working experience in M&E, either in commercial building or Marine or Offshore industries

2) Able to manage a group of service technician in term of planning, customer compliant, system trouble shooting related to control, etc

3) We can apply work permit for the right candiate

4) CV to submiss for our evaluation.

Please email resume with expected salary to [email protected] to arrange for an interview

The School of Civil and Environmental Engineering (CEE) at Nanyang Technological University is a leading school for Sustainable Built Environment. It has over 60 faculty members and more than 1,500 students and is rapidly expanding its range of education and research activities. The School of Civil and Environmental Engineering (CEE) aims at exploring and utilizing the underground space in a sustainable manner.

Our department is seeking to hire a high-calibre researcher to provide leadership and support for digital transformation of geotechnical industry.

Key Responsibilities:

• Responsible for developing state-of-the-art machine learning algorithms to fuse multi-source data for TBM tunneling risk assessment.
• Apply emerging digitalized approaches to transform the current engineering practices.

Job Requirements:

• Master’s degree in mechanical and civil engineering or related field
• At least 2 years of relevant experiences in thermal engineer / technical hands-on experience in thermodynamic analysis
• Good written and oral communication skills
• Proficiency in programming, such as Python, MATLAB, or other competent languages
• Competent in soft skills / general personality traits e.g. information visualization, interaction design
• A good record of publications in reputable peer-reviewed journals or conferences

We regret to inform that only shortlisted candidates will be notified.