Job Responsibilities

• Liaise between the various disciplines and departments to ensure works are carried out efficiently
• Ensure that the project meets the required specifications and standards
• Study and understand project spec, scope of work and scope of supply
• Assist to ensure that resources arrived are in accordance to the orders and requests raised
• Ensure that the resource allocations for production and project team are on time to ensure construction works can proceed on time
• Monitor and ensure that budgets are updated
• Support all HSE and QA/QC efforts and ensure works are in compliance to such efforts
• Assist in the preparation of reports to update the management on overall outyard activities
• Attend Client & Production Meeting together with Project Managers
• Tracks potential variations for the Projects and to follow up with Commercial
• Monitor progress status of individual Disciplines
• Submits Project Execution Plans for Tender Submission
• Any other ad-hoc duties assigned by Superior

Job Requirements

• Diploma/Degree in Mechanical Engineering
• Min 5 years of experiences in Marine Project Management holding the same designation
• Good management and leadership skills
• Have own vehicle to travel to site inspection when needed
• Able to travel overseas for short trip when required

Job Responsibilities:

· Responsible for all dispensing operation for materials to be used in Production, including to provide timely report to Production Manager,

· Responsible for the management of controlled substances/controlled drugs and inventory, ensuring compliance with regulatory requirements and organizational policies.

· Under Production Manager supervision and direction to manage operational training and development of manpower in production, and ensure relevant SOP update to date.

· To assist the Manager to plan, record and monitor the Production manpower headcount in accordance to employment matrix including proposing replacement and additional manpower

· Together with other team member to assist production manager in operational workforce management and engagement, and well-being.

· Together with production executive to conduct safety relevant training, to promote GMP compliance, and to support GMP audit, Project, etc under manager supervision and direction.

· Together with team member to support GMP inspection by authority or customers

· Other duties/projects assigned by the Production Manager.

We’re searching for a Network Engineer to be part of our diverse team of talents here at NCS!

If you believe in going above and beyond, want to exemplify the best, and wish to bring people and technology together like never before, then we would love to have a conversation with you!

Overview

• Provide technical support, propose solutions and project related queries for all Wired, Wireless network.
• Perform analysis, Plan, Coordinate and Implement all change requests on existing network equipment.
• Maintain records of system details (e.g. configuration, changes, problems, disaster recovery document) for network equipment.
• Manage firewalls like Checkpoint, Cisco FTD, Palo Alto and NEXUS switches; F5 Load balancer

What we seek to accomplish together:

• Gather business and/or application requirements on the infrastructure to plan, design, install, test & implement systems in accordance with the specifications & service level.
• Aligned or enhanced ITSM/ITIL methodologies in daily operations e.g. Change, Incident, problem, release management & CMDB.
• Monitor & measure the performance & availability of systems proactively; implement corrective actions identified to improve performance & service level availability.
• Respond promptly to incident, root cause analysis & provide temporary and/or permanent resolution of incidents escalated. Provide timely status updates to relevant parties.
• Implement service continuity measures, i.e., backup/restore procedures & disaster recovery plan, to ensure continuous operation of the business.
• Create and maintain comprehensive documentation for all implemented networks.
• Assist in preparation of proposals and solution presentations.
• Able to lead a team of network engineers (size).
• Attain key certifications for partnership with key vendors.

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

- Responsible of designing the Electrical system required to operate facility projects.

- Ensure smooth and proper execution of projects/contracts

- Supervision of construction works and co-ordinate with client’s representation, consultants and sub-contractors on technical issues

- Ensure quality of work is achieved and compliance of safety regulations

- Report schedule to Project Manager

- Attend site meeting with contractor on co-ordination and resolution of site problems.

- Must have good knowledge of generator electrical installation

Job Responsibilities

• Provide scheduling support to assigned projects
• Develop and maintain detailed project schedules using scheduling software (e.g., Primavera P6, Microsoft Project).
• Develop tender schedules and resource plans, ensuring competitive and achievable timelines.
• Participate in updating the master schedule and enterprise reporting.
• Perform critical path and float analysis to identify schedule risks and ensure on-time delivery.
• Coordinate with project managers, contractors, and other stakeholders to define the work breakdown structure (WBS), milestones, and deadlines.
• Ensure the schedule is aligned with the overall project goals and deadlines.
• Work with project teams to ensure resource allocation is properly reflected in the schedule.
• Collaborate with Engineering, Procurement, and Construction teams to ensure timely delivery of materials, equipment, and execution.
• Identify potential risks that could affect the project schedule and develop mitigation strategies.
• Ensure proper documentation of project-related activities, including variations, revisions, and decisions.
• Maintain a thorough record of project milestones, timelines, and any schedule-related issues or changes.
• Provide accurate schedule forecasts to project management and execution teams, helping inform deadlines and decision-making.
• Prepare concise schedule narratives describing the status of assigned projects
• Check compliance with company scheduling standard operating procedures
• Maintain quality assurance and control on assigned project schedules
• Perform technical data analysis and synthesize findings into resources for local and regional planning and policy documents.
• Present qualitative and quantitative findings utilizing oral, written, and graphic communication skills.
• Liaising with Project Manager to discuss the progress of the project and address any issues that arise
• Track jobs to ensure they will finish on time and within budget
• Prepare and submit status, performance reports. Comprehensive progress reports that detail progress measurements, S-Curve updates, productivity metrics, and variance analysis.
• Ensure that the reports accurately reflect project performance, identify any deviations from the planned schedule, and provide actionable insights for continuous improvement.
• Schedule shift according to E&C needs
• Monitor workforce and other resource productivity during project execution.
• Gather manpower report, equipment and raw materials needed to cover production demand

Job Requirements

• Degree in Engineering or equivalent
• Minimum 3 years relevant experience in the Petrochemical, Oil and Gas industry, of which at least 2 years have been performed as Planner / Scheduler
• Knowledge in Primavera P6 planning software packages. Relevant experience with resource loading and scheduling to produce progress status reports.
• Experience in actual construction is added advantage.
• Willing to work at the project site

Job Summary:

We are seeking a highly skilled Marine Structural Analysis Engineer to join our team. The successful candidate will be responsible for performing detailed structural analyses and design evaluations for various marine structures, ensuring safety, reliability, and compliance with industry standards and regulations.

Key Responsibilities:

• Perform structural analysis and design of marine structures including ships, offshore platforms, and subsea installations.
• Utilize advanced finite element analysis (FEA) tools and software to conduct stress, fatigue, and dynamic analyses.
• Develop and validate structural models to simulate and predict performance under various loading conditions.
• Collaborate with multidisciplinary teams to integrate structural analysis results into overall project designs.
• Prepare detailed technical reports, design documentation, and presentations for stakeholders.
• Ensure compliance with relevant industry codes, standards, and regulatory requirements.
• Participate in design reviews, risk assessments, and failure mode analysis.
• Provide technical support during the construction, installation, and operational phases of projects.
• Stay updated with the latest advancements in marine structural engineering and analysis methodologies.

Qualifications:

• Bachelor’s or Master’s degree in Civil Engineering, Structural Engineering, Naval Architecture, or a related field.
• Proven experience in structural analysis and design of marine structures.
• Proficiency in using FEA software such as ANSYS, ABAQUS, or equivalent.
• Strong understanding of marine structural codes and standards (e.g., DNV GL, ABS, ISO).
• Excellent analytical, problem-solving, and decision-making skills.
• Strong communication skills, both written and verbal, with the ability to present complex technical information clearly.
• Ability to work effectively in a team environment and manage multiple projects simultaneously.
• Professional Engineer (PE) license or Chartered Engineer (CEng) status is preferred but not required.

Preferred Skills:

• Experience with structural analysis of offshore wind turbines, oil & gas platforms, and subsea structures and marine vessels.
• Familiarity with software tools such as MATLAB, Python, or other programming languages for custom analysis and automation.
• Knowledge of marine construction techniques and materials.

What We Offer:

• Competitive salary and benefits package.
• Opportunities for professional development and career advancement.
• A dynamic and collaborative work environment.
• The chance to work on innovative and challenging projects in the marine industry.

Purpose: Responsible for reviewing customer supplied data and drawings; and the creation of manufacturing data, programs, tools, jigs and fixtures required for the manufacture of complex machined parts in the most efficient and safe machining process.

Key Area of Responsibilities:

• Review customer (internal/external) supplied data and drawings to ensure that supplied information aligns with project requirements and standards.
• Create manufacturing data, programs, tools, jigs, and fixtures required for the manufacture of complex machined parts in the most efficient and safe machining process.
• Perform machine simulation for all CNC programs to ensure error-free machining prior to release.
• Create detailed and clear shopfloor documentation such as machining setup sheets and tool list.
• Handle workshop feedback and troubleshoot problems relating to CNC machining, programming, and cutting tools in order to ensure parts are produced according to customers' drawings specifications.
• Manage revision control on the 3D model, drawing, program, tool list, and setup sheet documentation to ensure accurate records and allow all parties to follow the right revisions.
• Drive continual improvement on existing CNC program.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 5 years of working experience in the precision machining industry.
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Experience with 3D CAD, 3D CAM and simulation software (e.g. NX, and Vericut)
• Technical knowledge of cutting methodologies and cutting tools
• Experience with tool database software, automation, and post-processor development is advantageous.
• Problem Solving and Continuous Improvement

Resposibilities:

• Receive customer enquiries through customer portal or email.
• Download, update, and monitor customer product Bill of Material (BOM), drawings, and specifications and its revisions.
• Prepare Sales quotation/proposal/tender documents during RFQ/quotation stage.
• Check and ensure compliance to all specifications prior to providing customer the proposal.
• Calculate material, machining, cladding and other associated costs to quotations.
• Ensure quotations submitted are competitive and maintain a good profit margin.
• Follow-up on proposals with clients to secure orders.
• Prepare and distribute a Sales Order Job Launch when customer awards Purchase orders.
• Project Management on active Sales Orders and delivery schedules.
• Manage and build customer relationships and improve customer satisfaction.
• Coordinate with other departments to compile and submit documentations as required (e.g. pre-production/ final product documentations, concessions/non-conformances)
• Establish positive communications with customers regularly.

Requirements:

• Diploma/Bachelor’s Degree in Mechanical Engineering or related
• Highly motivated and driven
• Strong interpersonal and communication skills
• Team player
• Analytical, resourceful, and possess problem-solving capabilities
• Willing to undertake ad-hoc project assignments and be able to multi-task
• Proficient with MS Office tools
• Knowledge/interest in oilfield components and equipment will be an added advantage

What's in it for you?

• AWS & performance bonus
• Staff incentive
• Bespoke training and development programs
• Fun & open working culture
• Staff parties and company events
• Recreation room - pool table, karaoke system, board games, gaming consoles
• On-site gym facilities
• Accessibility (2-mins walk from MRT)

Job Description

• Researches, plans, coordinates and proposes original designs of mechanical products and systems. Performs testing of prototype and production equipment.
• Participates in customer and project review meetings relating to project assignments. Reports and presents information as required.
• Analyzes projects work scope to develop and coordinate design/drafting manpower requirements for project demand and scheduling.
• Assists in conceptual customer design proposal, identification of application. Prepares designs and layouts that define equipment concepts, or the basic functional characteristics of systems, components, structures or equipment.
• Leads design staff, on a project basis, in analyzing design alternatives. Suggests design options and prepares layouts illustrating the need of the customer.
• Review complete product layouts, working from detail drawings and sub-assemblies. Prepares and review all levels of engineering calculations.
• Create, check and review TCE and Engineering documentation through the ECN process
• Is responsible for project status for on-time delivery, productivity and quality and safety of design. Reports as required on assigned projects.
• Provide a link with the Product Groups to transfer new technologies or design improvement to the operations
• Follow all TFMC rules and procedures for Engineering, Quality, Environment, Health and Safety.
• Conducts and prepare design reviews
• Conduct SITs
• Goes on field assignments for new products installation and commission
• Provides technical support to manufacturing and marketing

Requirements

• Mechanical engineering degree (minimum honors, masters preferred) or minimum ten years related design/drafting experience within FMC engineering
• Knowledge of TFMC products and manufacturing processes or related experience preferred.
• Ability to perform high level engineering calculations.
• Experience in leading and supporting others in team building and time management skills.
• Skills include design, product knowledge, enabling technology, and computer skills.

Your Job

Molex Singapore is seeking for a Process Outsource Engineer to support production process improvements for subcontractors outside Molex Singapore, ensuring quality, yield, and productivity enhancements. You will be responsible for the smooth release of new products to manufacturing, resolving process-related issues, and tracking assets.

Our Team

This role involves extensive collaboration with various internal departments, subcontractors, fabrication vendors, and machine vendors/suppliers.

What You Will Do

• Develop and continuously improve the sub-con quality system to meet agreed goals.
• Monitor project deadlines and budgetary expenditures.
• Collaborate with Sub-Con, Product Design, QA, and Components Engineers to ensure new product release for manufacturing, including full qualification.
• Implement productivity, quality, and cost reduction programs, as well as machine and process improvements.
• Address and resolve quality and process-related issues at sub-cons for assigned products.
• Provide production support to resolve sub-con quality/process problems.
• Manage product capacity expansion, including duplicating machines/fixtures if necessary.
• Qualify all tooling releases to manufacturing at sub-con.
• Maintain proper documentation control for process capability studies, process FMEA, SOPs, process specifications, OJT task analyses, training records, production records, and assets.
• Oversee equipment transfers from in-house to sub-con, ensuring machine setup and production qualification.
• Provide coaching and supervision for new engineers.

Who You Are (Basic Qualifications)

• Degree or Diploma in Mechanical, Manufacturing, or Production Engineering.
• Minimum of 4 years of experience in a similar position (for external candidates) or a minimum of 2 years in a Process Engineer position at Molex (for internal candidates).
• Proficient in process improvement.
• Knowledge of quality systems.
• Ability to identify and propose solutions for directional errors.

What Will Put You Ahead

• Ability to work effectively in a team environment.
• Willingness to take on challenges and demonstrate initiative.
• Six Sigma certification

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

You will be responsible for the design and development of new high-speed custom automation. You will lead the machine development process and guide the activities of tooling design engineers, overseeing the machine lifecycle from quoting to mechanical design and delivery scheduling.

Our Team

You will collaborate closely with the Mass Production, Quality, Product Design, Tooling Design, and Machine Build Teams. This position is part of the DSS Manufacturing Services division and focuses on automation shop activities, design, and project management.

What You Will Do

• Provides assembly feasibility (Design for Manufacturability) and equipment cost estimates to the new product development team.
• Works with engineering department to determine design complete dates. Prioritizes work and delegates work assignments to designer engineers.
• Designs new connector and cable manufacturing machinery utilizing the Siemens NX CAD software.
• Assists in developing and executing the machine qualification plan.
• · Provides technical support for the launch of equipment produced by the LR-Automation Team. Responsibilities will include traveling to mass production facilities for machine install & qualification, training of technicians and operators to ensure the proper and safe operation of equipment and developing re-tooling strategies.
• Attends Design Reviews and PFMEA’s while working with design engineers to improve current and future designs of automation.
• Tracks projects using internal methods for summarizing component cost, labor, and leadtime. Develops accurate, up-to-date BOM’s and Spare Tooling Lists
• Understands, supports, and contributes to complete projects according to internal product development procedures, TQM and IS/QS-9000 requirements. Embraces Six Sigma, International Standards Organization (ISO) and Environmental, and/or Health and Safety (EH&S) Management Systems by following stated policies and procedures.
• Performs other related duties as assigned by management.
• International Travel: Up to 20% per year.

Who You Are (Basic Qualifications)

• Bachelor's degree in Mechanical Engineering.
• 5+ years of mechanical design experience.
• 3+ years of project management experience.
• Proficiency in Siemens NX or a comparable 3D CAD package.
• Experience with high-speed synchronous, asynchronous, and flexible (robotics) assembly systems.

What Will Put You Ahead

• PMP Project Management Certificate along with a Bachelor's degree in Mechanical Engineering.
• Knowledge of machine building techniques.
• Experience in scheduling and budgeting.
• Design experience with electrical connectors or cable assemblies and/or automotive assemblies.
• Mechanical cam/linkage analysis experience and toolmaking knowledge.
• Familiarity with mechanical and electrical systems design standards and machine wiring & industrial electrical logic.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Who we are

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

About Beca

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are currently recruiting for experienced Executive Engineer (Civil & Structural) to join the Singapore Office in a growing engineering consulting business.

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• To work with the Qualified Person (QP) to develop structural scheme for structures and buildings.
• To carry out engineering analysis to assess the stability and load to be sustained by the structures.
• To carry out engineering design in according with Eurocodes or relevant international design codes.
• To prepare submission to authorities for approval of design.
• Provide technical advice to team members/colleagues in supporting or leading role and embrace a culture that values teamwork
• To attend project meetings with Client, Project Manager and Consultants from other disciplines.
• To attend site progress meetings and reply to technical queries.
• To lead junior engineer in delivering design and seek clearance for all relevant parties and authorities
• To conduct supervision & contract administration when required

Key Requirements

• Degree in Civil/Structural Engineering recognised by Professional Engineers Board, Singapore.
• Minimum 5 years of experience with design of multi-storey/high-rise building from a local engineering consulting environment will be an advantage.
• Those registered as Professional Engineer with PEB and/or have more relevant working experience will be considered for senior role.
• Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures.
• Competent user of relevant engineering software.
• Excellent written & spoken communication skills in English.
• Able to interact and work with colleagues and member of other consultants at various levels.
• A team, client and delivery focused working style.

Job Highlights

• Career Advancement
• Medical Allowance
• AWS & Variable Bonus

Why Beca?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Job Description :

• Making plans using detailed drawings
• Preparing estimates and budgets
• Creating accurate project specifications
• Designing engineering experiments
• Creating technical reports for customers
• Completing regulatory documents concerning safety issues
• Finishing projects on time and within budget
• Communicating with clients and co-workers about analysis results
• Conducting research and applying new knowledge.
• Designing processes, materials, tools, and systems.
• Making improvements to existing processes, materials, etc.
• Implementing solutions and designs.
• Training other engineering personnel.

Job Description & Requirements

You will be part of an innovative and passionate team, working towards the one ultimate goal of producing high quality software. Your primary duties are design, prepare technical specifications, lead a team of developers, programming, unit-testing, and analytical problem-solving; but may include support for products implementation, integration testing and documentation.

The individual will:

• Responsible for the successful enhancement of software products and solutions by co-operating with other teams to ensure releases that are coordinated in terms of both time and technology.
• Design system architecture; translate user's requirements into functional and technical specifications.
• Participate and manage testing, debugging, verifying design and conduct reviews.· Participate and manage data and solution migration.
• Assist pre-sale in architect technical solution.
• To perform other duties as and when required.

Skills Requirements

• Degree in Computer Science or Information Technology or equivalent.
• In-depth experience in Java
• Working knowledge of Object-Oriented
• Working knowledge on any web framework, with understand MVC concept on the web-based application
• Working knowledge on conceptualizing and designing web-based application
• Preferable knowledge and experience in Spring and Hibernate Framework, Spring Boot, REST, Drools, HTML5, Oracle.
• Possess a passion in software engineering/development, with drives to be an effective team leader
• Ability to communicate effectively and clearly
• He or she should show self-initiative in learning, and self-development
• Ability to work under pressure to deliver projects within the designated deadlines.
• At least 2 to 5 years of relevant experience

#TeSA #TMCA

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for DevOps Engineer

Internal Code: A24104

We aims to spearhead the digital transformation of government. We are a team that aims to design and develop software applications that help government agencies better serve the needs of Singaporeans. We adopt an Agile development approach and work towards adopting tech best practices and cutting edge tools.

We are seeking highly motivated individuals skilled in DevOps to join us for some exciting projects. You’ll work with a multidisciplinary team of designers, developers and business experts to create solutions that exist in both digital and physical realms.

As we launch new products, your role will be to ensure that the future of public service is not just functional, but delightful to use. Rather than work on commercial ventures commonly found in the startup scene, we're here to improve how we live as a society through what we can offer as a government.

What will you do?

• Manage the development of the internal engineering productivity tools and environments.
• Providing DevOps architecture implementation and operational support
• Architecture and planning for cloud deployments (Private and Public cloud)
• Be an innovative and hands-on DevOps engineer capable of looking at both the technology and strategy around the platform.
• Future-proofing the technical environments and ensuring extremely highlevels of automation, availability, scalability and resilience.
• Manage the development of the internal engineering productivity tools and environments.
• Manage processes, automation, best practices, documentation.
• Development and operation of continuous integration and deployment pipelines.
• Monitoring automation to effectively detect/predict/prevent issues in the environment and code base.
• Ability to conduct research into software issues and products as required
• Working with the latest tools and techniques
• Hands-on coding and mentoring, usually in a pair programming environment
• Working in highly collaborative teams and building quality environments.
• Ability to effectively prioritize and execute tasks in a high-pressure, fast paced, global environment
• Knowledge in lots of different open source technologies and configurations.

What are we looking for?

• Degree or Diploma in Computer Science/Engineering, Information Technology, Communications or other related disciplines.
• At least three years of professional experience in a DevOps engineer or equivalent position.
• Strong knowledge and experience in Devops automation, containerisation and orchestration using tools like Kubernetes, Terraform, Ansible and Docker
• Strong scripting skills e.g. Python, Bash, JavaScript
• Cloud computing deployment and management experience -AWS
• Understand/practice Agile projects
• Strong understanding of networking

Preferred:

• Experience with highly scalable distributed systems
• Breadth of knowledge - OS, networking, distributed computing, cloud computing

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Job Responsibilities:

• As an MEP (Mechanical, Electrical, and Plumbing) Engineer, you will serve as the primary liaison among design consultants, client representatives, statutory authorities, and other stakeholders, ensuring the timely delivery of design and construction documents.
• Assist in the development of MEP system designs to ensure they meet project specifications and regulatory standards.
• Collaborate with clients’ representatives on services such as diversions, removals, technical resolutions, and handling necessary certificates, documents, and as-built drawings.
• Facilitate the successful submission of these documents for Certificate of Statutory Completion (CSC) and the final project handover.
• Provide the procurement and operations teams with technical insights to support the award of subcontracts and procurement packages.
• Ensure all materials and systems selected for the project meet both technical and quality specifications.
• Oversee on-site activities and the work progress of MEP subcontractors, ensuring they adhere to project timelines, quality standards, and safety regulations.
• Verify that all materials, samples, method statements, and technical submissions are reviewed and approved according to project requirements.
• Ensure MEP installations are executed according to drawings and specifications, maintaining compliance with local building codes.
• Resolve on-site technical issues promptly by coordinating with project stakeholders and ensuring subcontractors have clear, actionable instructions.
• Prepare and review method statements for various MEP installations and testing procedures.
• Perform quality checks on MEP installations to ensure they meet design and safety standards.
• Ensure all systems are commissioned and fully operational before project handover.
• Maintain detailed records of work progress, inspections, and any technical changes.
• Submit daily and weekly reports to the Project Manager, documenting site activities, potential delays, and areas of concern.
• Adhere to and enforce health and safety regulations on-site, ensuring all subcontractors are working in a safe and responsible manner.
• Implement safety audits and resolve any safety concerns during construction.
• Propose improvements or optimizations to enhance the efficiency of MEP systems in ongoing or future projects.
• Assist the project team in any other MEP-related tasks as directed by the Project Manager or higher management.

Job Requirements:

• Possess Diploma or Degree in Mechanical or Electrical Engineering, or a related discipline.
• At least 2 years of experience working in an MEP-related role within the construction industry.
• Industrial project site experience is advantageous, particularly in the installation and commissioning of HVAC, Fire Protection, Plumbing, Process Systems, or Cleanroom facilities.
• Experience working with PMC (Project Management Consultancy) teams is preferred.
• In-depth knowledge of MEP systems (Fire Protection, Plumbing, HVAC, Process Systems, Gas Systems, or Cleanroom systems).
• Familiarity with relevant design software, including AutoCAD, Revit, and other BIM tools.
• Knowledge of local building codes, standards, and safety regulations in Singapore.
• Fluent in English, with basic communication skills in Mandarin.

• Salary up $4500
• 9am - 6pm (Mon to Fri)

Responsibilities:

• Assist project manager in planning and execution of project plans at site.
• Able to read and understand construction drawings.
• Prepare and submit of shop drawings and as-built drawings to client.
• Preparation of Weekly and monthly progress reports
• Attending design discussions with the Engineers, Managers, Client, and QP.
• Reviewing Consultant’s design drawings and specification

Requirement:

• Diploma/Degree in Engineering or related
• Knowledge in AutoCAD software
• Possess of BCSS safety certificate

For consideration, kindly submit your CV by clicking “APPLY Now” or email to "[email protected]"

**Only shortlisted candidate would be notified**

EA Reg. No: R1880058 | Dylan

• jobscope
• 
  
• looking for electrical engineer to do electric work
• managing workers in the company
• assist the company to bring in more sales
• assist the employer solving client issues at site

requirements

min 2 years in related job field

able to answer customer quires once customer ask

able to work at humid surroundings

Responsible on implementing and commissioning company products

Providing training and necessary support to customers

Assist in Pre- Sales Activity

Good interpersonal skill

Good knowledge in IT services is an advantage

Willing to learn new skills

Able to work with other teams with good working attitute

Able to work independently

Training will be provided

Job Description:

• Develop system safety program plan, hazard analyses and risk assessment documents, safety assessment report and hazard logs based on contracted system safety and project requirements
• Facilitate system safety reviews and assessment with project system safety working groups and to facilitate and seek technical endorsement for safety assessment report with company and customer safety review boards
• Ensure system safety requirements and implementation are complied with company process and contracted requirements for projects and in-house products
• Submit monthly project status report and updates to Project Manager, System Safety Leads and Department Manager
• Support safety related administrative functions
• Conduct failure investigation and prepares reports for problems or issues based on findings from facts, research, studies and makes necessary recommendations and submits to relevant authority for approval
• Prepare and studies technical drawings, specifications of mechanical systems inclusive of engine, transmission, powerpack and driveline, and scopes of work to ensure (Maintenance, Repair and Overhaul) MRO operations conform to standards and customer requirements
• Document work procedures based on technical requirements for the MRO components
• Analyse and interpret test information to resolve repaired related problems
• Design, maintain, service and implement components so to be able to integrate into in-service systems, and interpret specifications and mechanical drawings for any re-engineering work required
• Responsible include training technicians; planning, assigning, and directing work to a group of technicians; appraising addressing complaints and resolving problems
• Appoint to be lead for a Platform to ensure the MRO Component serviceability is met at all times
• Perform literature searches on the subject area for MRO in Mechanical System especially in engine and transmission
• Assist in providing technology solutions to overcome more complex MRO systems so to allow work focuses upon the effective integration of people, processes, tools and technology in order to improve the MRO into the next level

Job Requirements:

• Degree/ Diploma in Mechanical Engineering with 2 year of working experience related to Automotive fields or MRO Services
• Certified Reliability Engineer will be an added advantage
• Able to read and understand mechanical drawings
• Possess good interpersonal skills and strong ability to work within a team
• Good interpersonal & communication skills
• Ability to present ideas, approach and objectives clearly
• Work under pressure, independent and self-motivated
• Good listener, and able to understand customers problem or question and help them solve it
• Customer orientated
• Good analytical and problem solving skills
• Good communication skills and a strong team player
• Independent, highly motivated, meticulous, resourceful and possess a positive attitude

Job Responsibilities:

• To develop E&I shop drawings based on client given information, specifications, calculations
• Able to make revisions and incorporate comments made by clients
• Make the drawings in keeping with Company standards
• To provide MTO based on drawing details
• Required to maintain all drawing files, update drawings as needed, and make corrections to drawings as directed by the Section Head/Leads
• Explain drawings to production or construction teams and provide adjustments as necessary
• Must be able to work in an environment with schedules and priorities
• Hands on knowledge on Auto-cad is essential

Job Requirements:

• Diploma/Bachelor Degree in Electrical Engineering or equivalent
• Hands on AutoCAD knowledge
• Able to work in an environment with tight schedules and priorities

Key Roles and Responsibilities:

Marine Vessel Maintenance & Repair

• Perform regular inspections, maintenance, and repair work on marine vessels, including engines, propulsion systems, electrical systems, and HVAC systems.
• Troubleshoot and diagnose issues with marine equipment, machinery, and systems.
• Carry out emergency repairs and provide solutions to minimize downtime and ensure the continued safety of operations

Technical Support & Problem-Solving

• Provide technical support for complex repairs, ensuring compliance with safety and environmental regulations.
• Work closely with ship crews and offshore teams to address immediate and long-term repair needs.
• Develop and implement corrective actions to improve vessel performance and reduce operational risks.

Documentation & Reporting

• Maintain accurate records of all maintenance and repair activities, includingreports on inspections, repairs, parts used, and time spent.
• Ensure all repair work complies with regulatory and industry standards and is appropriately documented for audit purposes.
• Prepare maintenance schedules and provide recommendations for necessary upgradesor replacements.

Quality Control & Safety Compliance

• Monitor the quality of repair work and ensure all maintenance activities are carried out to the highest standards.
• Ensure compliance with maritime safety and environmental regulations, including adherence to SOLAS (Safety of Life at Sea) and MARPOL (Marine Pollution) requirements.
• Conduct safety checks and recommend improvements to prevent future damage or failure.

Collaboration with Other Departments

• Work closely with the project management, procurement, and logistics teams to ensure timely delivery of parts and services required for repairs.
• Collaborate with vendors, suppliers, and manufacturers for technical support and part procurement.

Training & Development

• Provide technical guidance and training to junior engineers, technicians, and crew members on vessel repairs and maintenance.
• Stay updated with the latest developments in marine engineering technology, repair techniques, and industry standards.

Qualifications & Requirements:

• Bachelor's degree or diploma in Marine Engineering, Mechanical Engineering, or a related field.
• Minimum of 3-5 years of experience in marine repair, maintenance, and troubleshooting of marine vessels.
• In-depth knowledge of marine systems such as propulsion, electrical, mechanical, and safety equipment.
• Stron understanding of maritime safety regulations and industry standards.
• Ability to read and interpret technical drawings and manuals.
• Strong problem-solving and troubleshooting skills.
• Good communication skills and the ability to work in a team environment.
• Must be willing to work offshore or in dry docks if required.
• Certification in marine safety and repair procedures (e.g., STCW, Basic Safety Training) is a plus.

Benefits:

• Competitive salary and benefits package
• Opportunities for career advancement and professional development
• A dynamic and supportive work environment

If you are passionate about marine engineering and have the skills to ensure the safe and efficient operation of marine vessels, we would love to hear from you. Apply today!

Your Job

As a Product Design Engineer specializing in IO connectors, your primary focus will be on supporting the development and manufacturing of new products. This will involve collaborating with manufacturing teams to review and provide feedback on the feasibility and plant capability of new concepts. You will also conduct analysis activities such as Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to ensure product performance and integrity.

Our Team

You will be reporting to Manager, Product Design

What You Will Do

• Support of new Product Development and manufacturing for IO connectors.
• Review new concepts with manufacturing and provide feedback on feasibility and plant capability
• Support analysis activities such as POC, FEA and Tolerance Analysis
• Provide alternative solutions to resolve gaps in achieving target specifications
• Manage activities related to FOT, FSV and DVP&R testing
• Support existing product already in production or launching.
• Provide Engineering support of customer quality issues to ensure product reliability
• Provide Engineering support to plant for cost reductions and yield improvements
• Create Product Modifications and series expansions to increase market share
• Other duties as assigned by Management

Who You Are (Basic Qualifications)

• Bachelor’s degree in engineering
• 3 years mechanical product design experience with electronic products
• Experienced with product development process
• Understanding of Tolerance analysis, DFMEA, FEA
• Attention to details, be creative, good interpersonal skills to work effectively with internal cross functional teams and external customers
• Self-starter with confidence to initiate action independently

What Will Put You Ahead

• Bachelor’s degree in mechanical engineering and similar work experience
• From connector industries
• 5 years with specific high speed data connector design knowledge in the commercial or consumer space
• Knowledge of SMT design and signal integrity
• Strong mechanical aptitude and experience with clean sheet new product development component design
• Advanced tolerance stack understanding and risk mitigation skills
• Familiar with the component manufacturing environment, understanding of industry quality standards and requirements
• Basic knowledge on component design (injection, diecasting, sheet metal stamping)

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Job Description & Requirements

You will be part of an innovative and passionate team, working towards the one ultimate goal of producing high quality software. Your primary duties are design, prepare technical specifications, lead a team of developers, programming, unit-testing, and analytical problem-solving; but may include support for products implementation, integration testing and documentation.

The individual will:

• Responsible for the successful enhancement of software products and solutions by co-operating with other teams to ensure releases that are coordinated in terms of both time and technology.
• Design system architecture; translate user's requirements into functional and technical specifications.
• Participate and manage testing, debugging, verifying design and conduct reviews.· Participate and manage data and solution migration.
• Assist pre-sale in architect technical solution.
• To perform other duties as and when required.

Skills Requirements

• Degree in Computer Science or Information Technology or equivalent.
• In-depth experience in Java
• Working knowledge of Object-Oriented
• Working knowledge on any web framework, with understand MVC concept on the web-based application
• Working knowledge on conceptualizing and designing web-based application
• Preferable knowledge and experience in Spring and Hibernate Framework, Spring Boot, REST, Drools, HTML5, Oracle.
• Possess a passion in software engineering/development, with drives to be an effective team leader
• Ability to communicate effectively and clearly
• He or she should show self-initiative in learning, and self-development
• Ability to work under pressure to deliver projects within the designated deadlines.
• At least 2 to 5 years of relevant experience

#TeSA #TMCA