• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Diploma in Electrical Engineering or equivalent
• Good interpersonal and communication skills

Job Description:

• Lead metal Additive Manufacturing process, materials and application development and service projects, including material selection, part design, parameterization, prototyping and manufacturing of AM parts
• Scoping, managing, and executing of customer projects within budget and schedule, ensure deliverables, objectives and customer requirements are met
• Provide technical consultation and support to customer enquiries relating to metal AM application
• Operation of metal AM machines and auxiliary equipment, including maintenance, troubleshooting, risk assessment, and managing of AM lab
• Documentation of project reports, engineering reports, technical data, process know-hows; development of SOPs and best practices for AM equipment and processes
• Support market promotion and customer engagement; participate in local or overseas industry exhibitions, tradeshows, conferences, and seminars; facilitate lab tours, demos and presentations
• Provide technical content to support creation of marketing collaterals such as demo parts, product videos, whitepaper, etc.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers
• New hire is required to undergo specific tests for who are exposed to certain occupational hazards.

Requirements:

• Bachelor's Degree / Master / PHD in Engineering, Mechanical, Materials, Aerospace or equivalent
• Min 5 years of working experience with metal Additive Manufacturing process and application development
• Hands-on experience with LMD/DED machine operation
• Proficient in data preparation, CAD/CAM and toolpath generation for LMD/DED process
• Strong understanding of LMD/DED process, materials, and key process variables
• Experience with parameters development, material characterization, or process simulation
• Familiar with metal AM process chain
• Keen on hands-on work
• Fast learner and agile, able to adapt to dynamic work environment
• Able to work independently and self-motivated

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible for successful customers’ product full lifecycle, including but not limited to, technology transfers, new products introduction, device performance, yield, and reliability of our advanced technologies

Key Responsibilities

• Take charge for successful new products qualification and technology transfers from motherfab
• Complex data analysis to identify process design weaknesses and/or manufacturing tool issues.
• Design and execute experiments, analyse complex data sets and derive actionable insights to improve yield and performance for each specific technology and/or products
• Collaborate with the engineering teams to maintain process stability and provide technical solutions to customers

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Minimum of 4 years of experience in silicon process flow enhancements and managing process shifts, changes with design rules and product layout, ensuring optimal yield, electrical test and product performance with short-and long-term reliability implications considerations
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You are responsible for identifying, assessing and advising on risks arising from the workplace health, environmental and/or work processes, recommending measures to eliminate or minimize and control the risks and implementing the measures.

Key Responsibilities

• Conduct job and environment hazard and risk assessments, perform workplace evaluations, and implement corrective and preventive actions
• Apply relevant licenses, conduct tests and provide necessary inspection reports on environment and safety to drive improvement
• Lead and continually review existing and new Fab processes and equipment for EHS compliance, including managing waste, air, water, chemicals, gas and others
• Manage semiconductor process safety, establish Environment, Health and Safety (EHS) culture, implement and enhance the EHS program for employees and contractors
• Perform regular and ad-hoc inspections. audits and supervise hazardous operations safely
• Lead and facilitate ERC (Emergency Response Committee) related activities such as factory emergency response, fire, gas leak and others
• Collaborate with relevant departments for ISO14001, ISO45001, ISO14064, and ISO50001 management systems certification and compliance
• Provide technical, regulatory and process guidance to address emerging EHS issues

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Engineering or Science background including Occupational Safety, Chemical Engineering or Chemistry, environmental science and emergency response or management
• Minimum of 3 years of experience in semiconductor, electronics manufacturing, or other chemically intensive manufacturing industries and regulatory compliance preferred.
• Possess industrial safety, environmental protection, and fire protection related certificates
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months

Key Skills and Attributes

• Strong analytical skills and able to work under pressure in a fast-paced environment
• Good interpersonal, leadership and communication skills to work effectively across functions and geographical teams with diverse background
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

• Responsible for leading the planning and design of Mechanical engineering works for building services and infrastructure works.
• Review reports, specifications, calculations, drawings, and other documents prepared for the different stages of a project.
• Supervise the installation, testing, and commissioning of Mechanical engineering works.
• Work together with other disciplines in feasibility studies and design, as well as to ensure excellent service delivery to Clients.
• Correspond with project experience acquired and individual competency in technical knowledge/skills, project management, and contract administration.

Job Requirements:

• Degree in Mechanical Engineering recognized by the Professional Engineers Board, Singapore
• Registered with the Professional Engineers Board, Singapore.
• Minimum 3 years of relevant experience in Mechanical engineering design for building services and infrastructure works. Those with more than 5 years of relevant experience may considered for a Senior role.
• Good working experience in a consulting firm with a proven track record in major development projects.
• Conversant with local codes and regulations, and authority submission procedures.
• Strong planning, organizational, and supervisory skills.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous

Job Description

• Industry/ Organization Type: Manufacturing/ Semiconductor
• Position Title: Production Operator
• Working Location: Woodlands (walking distance from MRT)
• Working Hours: 5 Days, Mon - Fri (11.30pm – 8.30am)
• Salary Package: Basic Salary + Shift Allowance + OT + AWS
• Duration: Permanent

Key Responsibilities

• Operate and maintain manufacturing equipment.
• Monitor production process and perform routine quality checks.
• Troubleshoot equipment issues and perform minor repairs.
• Adhere to cleanroom standards and safety protocols.
• Record the production data.
• Other ad hoc tasks as assigned.

APPLY NOW!!!

• Minimum GCE N-Level.
• Willing to commit night shift work hours.
• Candidates without experience are welcome to apply, training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #65911 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Highlights
Career progression opportunities.

Guidance by Experience Professional Engineers and company Directors to develop holistic competencies.

Involve in company operational and management processes.

Job Description

• Civil & Structural Engineering Design.
• Fire safety, Pollution Control and Singapore Statutory requirements design.
• Project execution & management.
• Company level operational processes and management.

Responsibilities

• Civil & structural and other engineering design.
• Manage Engineering team.
• Manage or support design teams.
• Project co-ordination or management.
• Involve in company level operational and management processes.
• Assist Company Directors in the performance of their duties.

Job Requirements

• Registered Singapore Professional Engineer or
• Civil Engineering Degree that is registerable as a Singapore Professional Engineer preferred.
• Candidates with BIM knowledge/experiences will be an advantage.

Additional Requirements

• Good knowledge of engineering design and project management.
• Effective communicator and motivated.
• Have broad vision and good sense of reality.

We are seeking an Application Production Support professional to manage support activities for Olympic (Core Banking) and related systems. The role involves handling incidents, service requests, end-user queries, and maintaining system reliability.

Responsibilities:

• Provide L1/L2 application support to end-users.
• Escalate unresolved tickets to appropriate teams following established procedures.
• Deliver excellent customer service to build trust and positive relationships with users.
• Ensure adherence to Service Level Objectives (SLOs) and roadmap targets.
• Maintain and update knowledge articles.
• Support disaster recovery (DR), business continuity (BCP) exercises, and patching cycles.

Ideal candidate:

• Basic troubleshooting skills on AS400 and Unix.
• Strong knowledge of SQL queries and data analysis.
• Familiarity with production support tools like ServiceNow and JIRA is a plus.
• Strong verbal and written communication skills, with the ability to engage with a diverse group of stakeholders.
• Proactive, positive attitude with a team-oriented mindset.
• 7+ years of experience in IT production L1/L2 support within the banking industry.
• Knowledge and experience with banking products such as investment instruments, corporate actions, loans, deposits, remittances, and foreign exchange.
• Experience with Olympic banking system is a strong advantage.

Responsibilities

• Assist/support Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements;
• Understand the contract and scope of work for topsides with sub-contractor;
• Prepares key project documentation as per project specification requirements;
• Manages project topsides related drawings and controls technical documentation across disciplines;
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget;
• Assist topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assist topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Support topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Review & comment the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables;
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull;
• Co-ordinate between discipline to utilize the shared license based-on work priority;
• Monitor & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer;
• Record & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager;
• Expedite the information required by each discipline prior to start & complete the topsides design works;
• Monitor 3D model clashing issues with other discipline;
• Prepare Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM;
• Lead topsides design review activities either internally with other discipline or externally with other parties (include client);
• Initiate, organize, participate, record & file the minutes of meeting with external parties (include client) for topsides design related activities;
• Prepare, update & monitor the topsides design Punch List & Hold List on weekly basis, especially related to external parties (include client);
• Support Project Planner in preparation of monthly or weekly report to client related to topsides design progress & status;
• Support Topsides Engineering Manager/Engineering Project Manager & commercial team for VO related to topsides design;
• Responsible for ensuring that all topsides design activities meet work scope & comply with Project Quality Plan.
• Liaises with Construction & Commissioning Team to ensure topsides design activities are in-line with Area or System Completion Priority.
• Understand and monitor all interfaces with Class Society (if topside is classed) / other regulatory bodies and Clients to ensure requirements are properly addressed and relevant documents are reviewed timely.
• Assist topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering;
• Minzmum 10 years working experience in offshore oil and gas project managing topsides design works;
• Able to liaise with internal and external parties;
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design;
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Highlights:

• Working with world's leading company in SMT / PCB / semiconductor industries.
• Attractive salary package: AWS, variable bonuses, comprehensive medical coverage.
• Career growth opportunities with trainings provided.

About the Company:
Our client is a global technology company and a market leader that develops and provides leading-edge solutions in surface mount technology, equipment and materials for the semiconductor assembly and packaging industries.

Role Overview:
Join our client's dynamic team as a Software Engineer or Senior Software Engineer, where you will develop and manage cutting-edge solutions for SPI, factory line systems, and associated modules. The role demands technical expertise, creativity, and a strong focus on quality to deliver scalable and maintainable software solutions. Senior candidates will additionally lead complex design tasks, mentor junior engineers, and drive innovation in a competitive landscape.

Key Responsibilities:

• Design, develop, and maintain software solutions for SPI and factory line systems, focusing on quality and scalability.
• Provide effective solutions for production units and address customer requirements with a balance between functionality and time-to-market.
• Solve complex engineering problems using innovative approaches and technical analysis.
• Conduct technical reviews and provide evidence of appropriate solutions to customers.
• Stay updated on industry trends through continual professional development.
• Guide junior team members (for Senior roles) and support their growth.
• Perform any additional ad-hoc duties as assigned.

Requirements:

• Bachelor/Master Degree in Engineering or a related discipline.
• A minimum of 3–5 years of relevant working experience, depending on the role.
• Strong experience in software design, analysis, and validation of engineering requirements.
• Proficient in C++, UML, and the appropriate usage of design patterns.
• Familiarity with Source Control Systems, Visual Studio, and Software Development Lifecycle.
• Knowledge and experience in hardware systems, real-time control systems, Unit Testing, Dependency Injection, and WPF are advantageous.
• Demonstrated ability to balance functional design with time-to-market considerations while maintaining scalability and maintainability.
• Senior candidates should have experience mentoring junior engineers and leading complex software design tasks.

How to Apply:

Interested candidates, please submit your updated resume by using Apply button

**We regret to inform that only shortlisted candidates will be informed.**

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Engineer/Engineer to be part of our Product Engineering diverse team of talent. You will be responsible for yield, quality and reliability issues of devices.

What you will be working on:

• Resolve yield, quality and reliability issues in the qualification of new devices
• Perform pre-tapeout risk assessment and communication with Business line/ Fab on the necessary actions to eliminate/ minimize risk
• Conduct product yield analysis to identify root causes of wafer sort and final test failures
• Work with Customers and Account Managers to maximize die output
• Establish product low yield criteria and dispositioning
• Provide product engineering support to failure analysis lab for electrical fault isolation
• Provide product engineering support to reliability lab to understand and resolve reliability failures
• Compliance to safety, discipline and housekeeping rules
• Support cost reduction through yield improvement and resolving excursion
• Participate in continuous yield and productivity improvement projects

More About You:

• Bachelor's Degree in Engineering (Electrical/Electronic) or equivalent
• 2 years of relevant product engineering experiences in front-end wafer fab environment or
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical and problem solving skills
• Good communication and interpersonal skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a MECHANICAL ENGINEER/ SENIOR ENGINEER to be part of our FACILITIES DEPARTMENT diverse team of talent. You will be responsible for HVAC systems, Clean Room, Building services and maintenance.

What you will be working on:

• To provide facilities support pertaining to Clean Room, Chillers and HVAC systems, Environmental Protection Systems, Process Utilities Supply Systems, Building Services and Maintenance, and other miscellaneous mechanical and facilities systems to wafer fabrication so as to ensure continuous supply of utilities and related facilities at the required performance level or specifications
• Formulate, implement, review and improve preventive and predictive maintenance programs for systems in charge so as to ensure that the systems function as intended at all times
• Carry out repair and troubleshooting of systems in order to restore systems to their operating conditions in the shortest possible time. Carry out root cause analysis and implement action plans to prevent recurrence
• Able to formulate effective reporting and tracking systems for monitoring of system performance and capacity usage. Recommend and implement improvement/enhancement projects where appropriate.
• Formulate, implement, review and improve operating procedures so as to ensure optimum operation of systems
• Monitor and review utility consumptions and work with users to implement projects to reduce the consumption where possible
• Knowledge of all relevant standards, legislations, codes of practice etc and ensure their compliance
• Provide guidance and training on the systems in charge to fellow colleagues so as ensure adequate working knowledge and system backup
• Ensure plant histories, drawings, data and other appropriate documentations are being generated and properly filed for future reference and review.
• Evaluate and recommend appropriate spares, consumables and other resources necessary for the day-to-day operation of the systems.
• Conduct project supervisions.

More About You:

• Master / Degree in Science, Mechanical Engineering, Building or equivalent. Preferred candidate with SCEM certification.
• 5 years of relevant working experience in semiconductor, pharmaceutical or petrochemical industry. Hands-on experience in day to day operation and maintenance essential.
• Experienced in managing cleanroom (Class 100 environment) systems
• Person shall act as SME for ACMV system. Person must have sound knowledge of operation and maintenance of Clean room areas and ACMV system
• Provide building services and maintenance, including building facilities repair and upgrading, housekeeping, landscaping and pest control.
• Knowledge of maintenance principles and good engineering practices.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Engineer/ Senior Engineer to be part of our Photo Process department diverse team of talent. You will be responsible to sustain and improve all metrology tools and recipe indices to meet operations goals

What you will be working on:

• Optimize process capability to meet operation needs
• Perform Shift duties to support production
• Implement projects to upkeep process capabilities and reliabilities
• Troubleshoot process issues, establish Best known methods for future reference.
• Monitor and control process performance indices such as Cpk
• Work as a team with both equipment and manufacturing Engineers to meet module objectives
• Start-up new equipment processes which involves process characterization and development
• Establish and maintain a good audit system for both internal and QA audit on process documentation.
• Troubleshoot out-of-control situations and decide on the lot disposition in an out-of-spec situation.

More About You:

• Bachelor Degree in Engineering, Science or equivalent
• 1-3 years experience in semiconductor manufacturing environment. Fresh graduates with keen interest to develop a career in semiconductor manufacturing environment are welcome to apply.
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes.
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Posses logical thinking skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Our Client is in the Manufacturing Industry. Due to their current expansion plan, they are looking for a Manufacturing and Production Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities

• Offer continuous technical support to contract manufacturers, resolving electronic engineering issues encountered during production.
• Work closely with manufacturers to establish and uphold rigorous quality control standards, ensuring reliable and consistent product performance.
• Analyze manufacturing workflows to identify and implement process improvements that boost efficiency and productivity.
• Address and resolve electronic engineering challenges to prevent production delays and minimize defects.
• Collaborate with design and development teams to implement design enhancements that improve product quality and streamline manufacturability.
• Coordinate investment audits with cross-functional teams, conduct regular physical asset inspections, and assist with annual inventory checks as needed.
• Any ad-hoc duty as given

Requirement

• Min Bachelor's degree in Electronic Engineer or a related field
• Min 4 years in EMS - Electronic device assembly
• Good understanding in overall supply chain, manufacturing technology, process set-up, process validation and SOP support
• Knowledge and experience in manufacturing, planning, quality, SAP, PLM
• Knowledge and experience in wearable electrical device's assembling
• Comfortable to travel overseas often

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Benefits:
• Basic salary $1800 - $2300 for technician in both machine and semiconductor industries
• AWS + VB

Job Scope:
Machine and Semiconductor
• Conduct inspections, troubleshooting, and maintenance on equipment and systems at client premises
• Perform mechanical assembly and modification of production components using various tools and equipment
• Support production processes and inventory management, ensuring compliance with established procedures
• Collaborate with engineers on project management, equipment installation, and maintenance services
• Participate in continuous improvement activities and maintain productive working relationships with team members
• Meet production output and quality requirements while handling ad-hoc tasks as assigned by the supervisor

Job Requirements:
• No prior experience required for technician in machine/semiconductor industry(Training provided)

To Apply, kindly click on the "APPLY NOW" button
We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Ng Jia Yee (Jacine) (R22109579)
EA License No: 20C0358

Work Time Profile:

Monday to Saturday, 8.00am to 1.00pm

Company Benefits:

• Training and Development opportunities
• Staff Discounts on seafood purchases
• Medical Benefits
• Seafood Hampers
• Quarterly Profit-Sharing

Job Duties:

• Operate machinery and equipment for tasks such as slicing, portioning, and deshelling seafood products according to quality standards
• Conduct rigorous quality checks on processed seafood products to guarantee compliance with established quality standards
• Identify and address any deviations from quality specifications, reporting issues to the team leads promptly
• Adhere to strict safety protocols and guidelines to ensure a safe working environment
• Maintain cleanliness and hygiene in the processing area, following sanitation procedures and regulations
• Participate in regular safety training sessions and contribute to maintaining a culture of safety awareness
• Operate and monitor processing equipment efficiently and report any malfunctions or irregularities

You need to have/be:

• Strong attention to detail and ability to identify quality defects
• Ability to work efficiently and accurately under pressure
• Excellent communication and teamwork skills
• Ability to follow instructions and adhere to safety guidelines
• Basic understanding of food safety and hygiene principles
• Ability to stand for extended period

Benefits:
• Basic salary $1800 - $2300 for technician in both machine and semiconductor industries
• AWS + VB

Job Scope:
Machine and Semiconductor
• Conduct inspections, troubleshooting, and maintenance on equipment and systems at client premises
• Perform mechanical assembly and modification of production components using various tools and equipment
• Support production processes and inventory management, ensuring compliance with established procedures
• Collaborate with engineers on project management, equipment installation, and maintenance services
• Participate in continuous improvement activities and maintain productive working relationships with team members
• Meet production output and quality requirements while handling ad-hoc tasks as assigned by the supervisor

Job Requirements:
• No prior experience required for technician in machine/semiconductor industry(Training provided)

To Apply, kindly click on the "APPLY NOW" button
We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Ng Jia Yee (Jacine) (R22109579)
EA License No: 20C0358

Your responsibilities include technical administration, maintenance and troubleshooting.

Monitor condition of server, apps and security measures

Identify, log and resolve technical problems of the scope (Incident Management)

Ensure that work is carried out within agreed service levels (Service Request / Incident / Change / Patch Management)

Respond to site to troubleshoot, diagnose and rectify faults

Liaise and coordinate the recovery of systems

Identify potential changes and system improvements for consideration and implementation (continuous improvements)

Create, maintain and distribute reports of progress to service delivery manager.

Any other ad-hoc tasks assigned

Good knowledge of Vmware and Nutanix

Good knowledge of windows operating systems, Clusters, NLB, or Unix

Good knowledge of Solarwinds, Qradar

At least 3 years of relevant working experience in infrastructure support is required for this position

4-6 years of experience in web development
Proficient understanding of web markup including HTML5, CSS3 and or Ant Design framework
Experience in server side CSS pre-processing platforms including but not limited to LESS and SASS
Proficient in client-side scripting and JavaScript/typescript frameworks and libraries specifically Angular and Express (NodeJS)
Deep understanding of asynchronous request handling, partial page updates and AJAX
Proficient understanding of cross browser compatibility issues and ways to work around them
Proficient in ORM framework and or SQL-based queries preferably in MariaDB
Good understanding of RESTful API and able to make API in Express.
Proficient understanding of charting library specifically D3.js and g2plot
Good working knowledge on Software Development Lifecycle and has experience using tools such as GIT, SVN, Jenkins, Bamboo, JIRA, etc.
Knowledge on Agile methodology
Responsibilities
Develops software solutions by studying information needs; conferring with users; studying systems flow, data usage, and work processes; investigating problem areas; following the software development lifecycle.
Determines operational feasibility by evaluating analysis, problem definition, requirements, solution development, and proposed solutions.
Documents and demonstrates solutions by developing documentation, flowcharts, layouts, diagrams, charts, code comments and clear code.
Prepares and installs solutions by determining and designing system specifications, standards, and programming.
Improves operations by conducting systems analysis; recommending changes in policies and procedures.
Updates job knowledge by studying state-of-the-art development tools, programming techniques, and computing equipment; participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations.
Provides information by collecting, analyzing, and summarizing development and service issues.
Accomplishes engineering and organization mission by completing related results as needed.
Supports and develops software engineers by providing advice, coaching and educational opportunitiesMinimum 5 years of experience on Java Full Stack as Full-stack Developer

GVRN (https://www.gvrn.ai) is the leading LegalTech for Web3 founders and investors. We offer Web3 native legal structures and services, catering to the unique challenges of blockchain-based projects as they navigate the complexities of jurisdiction frameworks and governance.

The average Web3 founder operates a global business that has international stakeholders and is fraught with regulatory uncertainty from day one. Holistic and credible Web3-native support is expensive and hard to come by, leaving many founders to create sub-optimal corporate and operational structures. GVRN is here to support Web3 projects throughout its lifecycle from project inception through to maturity as a DAO, taking these middle-back office functions off the founders’ hands while increasing the legitimacy and standards of the Web3 industry as a whole.

We are based in Singapore with some of our team collaborating remotely from other countries.

What You Can Expect To Work On

• Design, develop and execute test plans and scripts for our web apps built on ReactJS
• Collaborate with developers, product managers, and business owners to understand requirements and create comprehensive test cases
• Perform functional, regression, performance and security testing to identify bugs and ensure quality and stability of the products
• Automate test scripts using industry-standard tools and frameworks
• Troubleshoot, analyze and assist with resolving issues found during testing
• Document test results and provide detailed feedback to development team

Requirements

• Bachelor's degree in Computer Science, Engineering or a related field
• 2+ years experience as a QA Engineer, preferably in a web development environment
• Good understanding of QA methodologies, tools and processes
• Proficiency in testing web applications, particularly those built with ReactJS, AWS
• Experience with automated testing tools such as Selenium, Playwright or similar
• Excellent problem solving skills and attention to detail
• Strong communication and collaboration skills
• Enthusiastic about Web3 technologies like NFTs, DeFi, and DAOs, with a willingness to learn quickly and adapt to the fast-changing landscape across different industries

Benefits

• We Listen. Your voice, ideas, and suggestions matters to us, as we continuously evolve
• Our People. You’ll be working with a diverse, multicultural, international, talented, fun, supportive, and innovative people and teams. We are people you can be proud to work with
• On The Edge of Innovation. Working on the latest technological, social and financial trends that is web3 and blockchain
• Flat Organisation. Our team is a community, we work together as a team from all levels in true decentralised spirit
• Hybrid Working. We offer a mix of work from home and office days each week.

Establishing new & maintaining existing, relationships with customers,

Persuading clients that a product or service will best satify their needs

Making technical presentations and demonstrating how a product will meet client needs.

Degree/Diploma in Mechatronics, Electrical/Electronic, computer engineering , PLC knowledge or relevant

qualification

2-5 years of experience in C/C++/C#/.NET

Must possess own vehicle & class 3 driving license

Pleasant & outgoing personality

Salary 3,900.00 to 4,200.00

5 days week

Salary package includes Basic + Allowance (transport + h/p)

Position Summary

The CIM Engineer is responsible for the implementation, maintenance & development of semiconductor automation facilities.

Candidates with Semiconductor, LCD industrial automation industries or smart factory / CIM experience are encouraged to apply for this position.

Key Responsibilities

• Development and maintenance of Quality Management system (QMS), Facility Automation (MC) system and Logistics automation (MCS) system.
• Responsible for new automation requirement, system survey, any modifications or improvement works.
• Identify equipment failures, root cause analysis, and recommend solution for technical issues.
• Provide cross-functional cooperation and vendor interaction to troubleshoot, analyze and develop solutions for problems involving integrated systems.

Requirement

• Bachelor’s Degree in Engineering, Computer Science, IT or similar.
• More than 5 years of experience in related field including 3 years of development experience.
• Team player with strong analytical and problem-solving skills.
• Experience in the following:

1. Programming languages (C, C#, .Net, etc.) and DBMS (Oracle, MS-SQL, etc.)
2. SECS-I, SECS-II, HSMS/GEM, OPC, TCP/IP
3. Facility and supersystem (MES, EMS, etc.) interface
4. Logistics AGV, ACS for OHT control, OCS
5. Smart factory/CIM implementation experience

Preferred Qualifications

• Quality related implementation and operation (SPC, TAMS, YMS, DMS, RMS, etc.)
• Facility interface experience through facility automation solution
• MCS solution R&D experience

Job Duties:

1. Cluster Setup and Maintenance:

• Install, configure, and maintain big data platforms like Hadoop Clusters, Elastic Search, Spark, Kafka, Hive etc.
• Set up and manage distributed file systems (HDFS) and NoSQL databases (HBase, Cassandra).
• Ensuring high availability and reliability of Hadoop, Kafka and Elasticsearch Clusters.

2. Performance Optimization:

• Monitor system performance, fine-tune jobs, and optimize cluster utilization.
• Manage and resolve performance bottlenecks in big data environments.

3. Security Management:

• Implement data security policies, user authentication (Kerberos), and access control (Ranger, Knox).
• Regularly review and plan patch systems to ensure data integrity.
• Apply updates, patches, and version upgrades to all managed systems.
• Ensuring the backward compatibility and minimal downtime during upgrades.

4. Backup and Recovery:

• Plan and implement backup and recovery strategies for big data environments.
• Develop disaster recovery solutions and test failover scenarios.

5. Workflow Automation:

• Design and implement workflows using tools like Apache Oozie or Apache Airflow.
• Automate cluster management tasks like upgrades and scaling.
• Developing shell scripts and Ansible Playbooks to automate routine tasks, including monitoring, backups, and deployments.

6. Monitoring and Support:

• Monitor logs, metrics, and system health using tools like Ambari, Cloudera Manager, or Prometheus.
• Provide 24/7 on-call support for production systems and resolve incidents.

7. Collaboration:

• Work closely with data engineers and developers to support ETL pipelines and data processing jobs.
• Collaborate with stakeholders to ensure big data systems meet organizational needs.
• Working transversally with other teams to guarantee high data quality and availability.

8. Cloud migration

• Migration planning from On-premises to GCP & AWS cloud

Job Requirements:

• Strong knowledge of big data ecosystems (Hadoop, HDFS, YARN, Hive, HBase, Spark, Kafka and Elastic Search).
• Proficiency in Linux/Unix system administration.
• Experience with monitoring tools like Nagios, Grafana, or Splunk, HPOMI.
• Scripting skills in Python, Ansible, Shell, or Bash.
• Familiarity with cloud platforms (AWS, Azure, GCP) and their big data services.
• 8-9 years of experience in big data administration or similar roles.
• Hands-on experience in scaling and managing large, big data clusters in production environments.

Interested applicants please send your resume in MS Words format and attn it to Tan Joanna (R1104661).

Short listed candidates will be notified

www.ambition.com.sg

EA Registration Number: R1104661

Data provided is for recruitment purposes only

Business Registration Number: 200611680D. Licence Number: 10C5117

Job Duties and Responsibilities:

• Responsible for trouble shooting and resolving all welding quality and productivity issues through active engagement with the customers and production supervisors
• Develop and draft new welding procedures, including procedure qualification training
• Trouble-shoot and provide support to the Production on all welding quality issues
• Conduct random inspections to ensure that the welding activities carried out conform to the relevant customer specifications, codes and standards
• Directs and coordinates technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with national code requirements; or testing welding personnel for certification
• Contacts personnel of other agencies, engineering personnel, or clients to exchange ideas, information or offer technical advice concerning welding matters
• Perform any other related duties as assigned by Immediate Supervisor

Requirements:

• Diploma/ degree in Metallurgical/ Material/ Mechanical Engineering
• At least 4 years of relevant experience in preparation of WPS, PQR and welders’ qualification
• Knowledge of API, ASME-IX, NACE MR00175 codes and ISO 9001:2015 standard
• Certified Welding Inspector or CSWIP