• Assists Project Manager in the co-ordination of project management activities to ensure that projects are executed in a smooth and effective manner;
• Attends external project kick-off meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting;
• Assists Project Manager in carrying out all shop drawings and submission with Drafting Department;
• Assists Project Manager in carrying out risk assessment and other risk management activities; makes recommendations on risk control measures; communicating risk assessment to all workers;
• Ensures all contractors are safety inducted and issued with Permit before work commencement;
• Ensures the adherence to the safe work procedure (SWP) established; to inform project manager or project director of any shortcoming in the SWP or risk control measures implemented;
• Ensures the familiarization with the scope of works;
• Resolves site problems proactively in a timely manner and seeks advice from Project Manager as appropriate;
• Ensures the timely preparation of project progress and other reports;
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation;
• Co-ordinates daily activities of workers’ duties and to ensure that they are performed in a proper manner;
• Makes daily checks on work progress, housekeeping and safety implementation on site with safety personnel;
• Assists in cost control by cutting materials wastage, reducing labour cost, usage of tools and equipment, etc;
• Assists the Project Manager in conducting Mass Tool Box meeting with safety personnel;
• Ensures proper project documentation including email communication;
• Assists in promoting good team morale and team spirit in the project team;
• Strong in Structural work

Job Title: Solar Project Engineer

Department: Engineering/Project Management

Reports to: Project Manager or Engineering Manager

Job Summary

The Solar Project Engineer will oversee the engineering, design, and technical aspects of solar projects from initiation to completion. This role requires close collaboration with project managers, design teams, and installation crews to ensure that each project is executed to the highest standards, safely, efficiently, and within budget. The Solar Project Engineer will also ensure compliance with all regulatory and industry standards, troubleshoot technical issues, and support continuous improvement in project execution.

Key Responsibilities

1. Project Design and Engineering

• Develop and review detailed designs for solar PV systems, including single-line diagrams, layouts, and schematics.
• Conduct feasibility studies and site assessments, including shading analysis, solar irradiance, and other site-specific conditions.
• Work with design software (e.g., AutoCAD, PVsyst, Helioscope, or similar) to model and optimize system performance.
• Select appropriate system components (e.g., inverters, solar panels, mounting structures) based on project requirements, budget, and site conditions.
• Collaborate with structural and electrical engineers to ensure system designs meet safety and regulatory standards.

2. Project Planning and Coordination

• Develop project timelines, resource plans, and engineering deliverables in collaboration with the project management team.
• Coordinate with procurement to source materials and ensure timely delivery of components.
• Prepare technical documents, including bill of materials, wiring diagrams, and specifications.
• Participate in pre-construction meetings to ensure alignment on project requirements and schedules.

3. Quality Control and Compliance

• Ensure all designs comply with relevant codes, standards, and regulatory requirements (e.g., NEC, IEC, local building codes).
• Conduct technical reviews and inspections of completed installations to ensure adherence to design specifications and quality standards.
• Implement quality control measures and perform periodic checks during installation.
• Review and approve submittals, test plans, and commissioning procedures.

4. Technical Support and Troubleshooting

• Provide technical support to the construction and installation teams, addressing issues as they arise on-site.
• Identify and resolve engineering issues that may affect project timelines, costs, or quality.
• Monitor system performance and work with O&M teams to troubleshoot and rectify issues post-installation.

5. Documentation and Reporting

• Maintain accurate records of engineering designs, specifications, and project changes.
• Prepare and present project status reports, highlighting technical progress, issues, and risks.
• Ensure that all documentation, including as-built drawings and commissioning reports, is completed accurately and submitted in a timely manner.

6. Health, Safety, and Environmental (HSE) Compliance

• Ensure all engineering practices comply with company HSE policies and local regulatory requirements.
• Participate in safety meetings, conduct risk assessments, and promote a safety-first culture on-site.
• Identify potential safety risks in the design phase and work with teams to mitigate these risks in implementation.

7. Stakeholder Communication

• Liaise with clients, contractors, and subcontractors to ensure alignment on project requirements and deliverables.
• Communicate technical updates, project progress, and any changes to key stakeholders.
• Attend site visits and client meetings to address technical queries and provide project updates.

Required Qualifications

Education and Experience

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or a related field.
• Minimum of 2-5 years of experience in solar project engineering, renewable energy, or a related industry.
• Proven experience with solar PV system design and project management.

Technical Skills

• Proficiency in design and simulation software (e.g., AutoCAD, PVsyst, Helioscope).
• Strong knowledge of electrical systems, solar PV technology, and power distribution.
• Familiarity with industry standards and codes (e.g., NEC, IEC).
• Understanding of site assessment tools and techniques, including shading and irradiance analysis.

Soft Skills

• Excellent problem-solving skills with a detail-oriented approach.
• Strong communication skills for effective collaboration with clients, team members, and stakeholders.
• Ability to work independently and manage multiple projects simultaneously.

Additional Requirements

• Willingness to travel to project sites as required.
• Valid driver’s license.
• Professional Engineer (PE) certification or PMP certification is a plus.
• Ability to work in outdoor conditions and at heights (if applicable).

Benefits

• [List any benefits your company offers, such as medical insurance, retirement plans, etc.]
• Opportunities for professional development and certification.
• Career growth in a rapidly expanding renewable energy sector.

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Hiring Seafood Production 诚聘生产部 $2k

1. Handle Pork and Seafood Products 处理猪肉和海鲜

2.Warehouse/Production 仓库/生产部

3. Pack Goods 包装

4. Can Read and Write English/Chinese to communicate with chinese speaking colleagues 能读写英文/中文

5. Work Fast and Responsible 快速及负责任

6. Physically Fit 能搬抬

7. Honest 诚实

7. Able to commit 能全心工作

8. Other tasks as assigned 被分配的其他任务

Able To Start Work immediately 能立即开工

9am-6pm (Mon-Sat)

Location 1) 1008 Aljunied Avenue 4

Location 2) Jalan Kelulut

Hp: 9189 8878 | Email: [email protected]

*Contract for service flexible Part Time available: 兼职 $11/hr (min working 3 days/week 最少要工作 3天/星期)

· 5 days’ work week

· Central area near MRT

· Reputable and stable organization

Job Responsibilities:

· Represent the company as the technical person to internal & external customers and partners in the assigned geographical region

· Provide pre-sales and post-sales technical support to customers and internal sales team, handling customer NDA and sample request

· Collect customers’ feedback and provide recommendation to customer for design requirements, product enhancements and capture new product opportunities

· Responsible for identifying and clarifying any technical issues related to new or existing products, and clearly communicate findings to the respective business unit

· Hands-on technical support to customers, documenting problems, and suggesting solutions

· Report design, reliability and functional problems to the appropriate groups within company & associate groups and work to solve problems

Requirements:

· Degree in Engineering (Electronics) or equivalent

· 5 years of technical customer support experience in semiconductor industry

· Field experience or hands-on practice or knowledge of multi-disciplinary system design and development

· Knowledge of Smart Card, RFID and microcontroller products; knowledge of physical access control and the security industry is desirable

· Experience with or knowledge of one or more of: CCD, CMOS image sensors, image capture, video standards, image processing

We would like to invite interested applicants to apply.

Thomas Tan

Registration No: 12C6253

License No: R2094900

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

Roles & Responsibilities

A Construction company (Solar) are looking for self motivate candidates:

Job scope:

• Responsible for coordination, planning, and forecasting to optimize utilization of resources to fulfil budgetary and project milestones
• Perform site study for PV system recommendation
• Manage solar project site team to ensure compliance with safety standards
• Monitor site work progress to ensure projects conform to specifications, schedules, and budgets
• Plan and review Bill of Materials (BOM) for projects
• Coordination with procurement team to raise sales request and ensure timely delivery of materials
• Investigate and troubleshoot M&E issues during and post project implementation in coordination with clients, contractors, other stakeholders
• Coordinate with LEW for site testing and inspection of installation
• Design and draft electrical single-line diagram (SLD), solar module layout and string-connection drawings for using AUTOCAD software
• Design and draft mechanical drawing of solar PV systems
• Prepare and review project documents for submission to authority and ensure smooth delivery of the project completion
• Assist with ad-hoc duties as assigned

Requirement:

• Min Diploma in Electrical/Mechanical Engineering
• Extensive experience in Solar Integration/Data Center client is an advantage
• Good foundation in M&E project

“Do you have a passion for creating mouthwatering, fresh-baked delights? With over a 110-years of tradition, founded in the heart of Kobe, Kansai, Hyogo Prefecture, join our team at DONQ and be a part of the magic that goes into crafting our exquisite bread and pastries. As a Bread Production Specialist, your role will be an adventure in itself."

BENEFITS

======================================

Master the Art of Bread Production

Bonuses and Yearly Annual Increments

Annual Leave and Medical Leave Benefits

Amazing career growth and promotion opportunities

Leadership Allowances

JOB DESCRIPTION:

======================================

Bread Artistry: Dive into the world of bread production, where you'll have the opportunity to learn, create, and master the art of crafting delectable, high-quality bread. From kneading to baking, you'll be an integral part of the process, ensuring every product meets our exact standards.

Quality Assurance: Your keen eye for detail will be vital as you work diligently to maintain the exceptional quality of our products at every stage of production. Each loaf should be a masterpiece, and you'll be instrumental in making sure that happens.

Kitchen Mastery: Keeping our kitchen and bakery equipment spotless and in tip-top shape is a crucial part of your role. Your efforts will contribute to the efficiency and safety of our operations.

Team Player: Your role doesn't stop at the production floor. You'll also be an essential support system for our sales staff, ensuring the seamless operation of our store. This means you'll get a taste of the sales side of things as well, including cashiering, bread slicing, and providing exceptional customer service.

JOB REQUIREMENTS:

=====================================

· 5 to 6 days work per week

· Minimally 1 day off a week, 6 days off per month excluding public holidays

· 8 hours work per day, 1-hour break time

· Able to work on weekends (Preferred)

· No experience required, new comers are welcome

· Hygiene certificate would be an advantage

Salary: up to $3000

Working Days & Hours: Mon-Fri Office Hours

Location: Changi (pickup from tanah merah)

Job Description:

• Uphold quality in every process of Distribution and Production operations undertaken
• Fully understand and adhere to all instructions as detailed in distribution & batch documents and SOPs
• Complete all documentation in compliance with the principles of cGMPs
• Perform routine cleaning of Clinical Services equipment and packaging rooms according to appropriate SOPs. Carry out housekeeping of the warehouse to ensure it is consistently clean and tidy
• Count and record materials required for use in Clinical Trial operations. Ensure all materials are handled carefully and in the correct manner
• (Quality) Report any known breaches in procedure, or any examples of substandard quality to supervisor
• Undertake additional duties or specific tasks as designated by superiors
• Receive incoming or returned materials in an efficient manner and perform putaway followed by the uploading of details into the Inventory Management System accordingly
• Ensure the correct picking of materials for all Distribution Orders
• Perform all Distribution activities in accordance with SOPs and Distribution instructions to ensure efficient, exact and secure completion
• Perform and maintain accurate computer transactions in line with Distribution and Inventory Management systems
• Process material for all Clinical Services packaging disciplines, e.g. blister packing, walleting, encapsulation, dispensing, label & compilation, in accordance with SOPs and Production Instructions
• (Quality) Undertake packaging duties in accordance with Good Manufacturing Practice as detailed in relevant SOPs.
• Hold responsibility for verification of materials processed by completing all relevant documentation.

Job Requirements: Min Diploma in Engineering or similar

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

The Production Planner is responsible for developing production/supply plans that consider demand, forecast, availability of material, resource, maintenance, and production capacity.

This position is part of the Materials Management team and will be located in Benoi, Singapore.

In this role, you will have the opportunity to:

• Coordinate and monitor daily performance, production output, scheduling commitments of the production plan to ensure on time delivery, optimized inventory levels, and equipment utilization and efficiency.
• Collaborate with Operation and Materials teams to drive schedule attainment and to meet the committed output and monthly/quarterly goals. Communicate any challenges, deviations, or abnormalities to cross-functional teams for prompt resolution.
• Monitor material supply and maintain efficient and productive use of raw materials to ensure continuous production.
• Prepares and releases production work packages, monitor and maintain all the dates and resolve issues with cross-functional teams. Utilize SAP for process optimization and inventory accuracy.
• Involve in weekly fulfilment meetings to review OTD, Past Due and Recovery Plans.

The essential requirements of the job include:

• Diploma or Bachelor’s Degree in Supply Chain, Business, Engineering or Science preferred.
• Minimum of 5 years of experience in manufacturing environment with APICS or ISM certification.
• Proficiency in Microsoft 365 with advanced Excel skills.
• Competency in SAP, Oracle, or similar ERP programs.
• Process effective communication, analytical and strong problem-solving skills.

It would be a plus if you also possess previous experience in:

• Good understanding of inbound supply chain, procurement, and warehouse activities.
• Development of production tools and reports.

• Lead a team of Process AE/Technicians to manage all process-related functions, ensuring efficient production.
• Collaborate with internal departments to establish and maintain a process operation flow that meets customer and business requirements.
• Ensure proper maintenance of production Working Instructions, including SFC control processes and SAP management.
• Guide operation teams through ECO changes and implementations.
• Drive process efficiency through improvements, UPH tracking, and Kaizen activities.
• Update and track the EC master list.
• Prepare and update Working Instructions.
• Provide training on Working Instructions to production teams.
• Support the NPI (New Product Introduction) process.
• Assist with production during mass runs.
• Participate in ISO activities related to implementation and maintenance.

Requirements:

• Degree or Diploma in Engineering with at least 3 years of relevant experience in manufacturing.
• Ability to effectively collaborate with customers, HQ/factory, peers, subordinates, and superiors.
• Strong problem-solving skills.
• Capability to work independently with minimal supervision.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EPC Solar PV System Integrator providing technologies solutions in Engineering, Design, Procurement, Construction, Testing and Commissioning, Operations and Maintenance of Solar Energy Systems from concept to completion.

Responsibilities:

• Conduct site survey and ensure the design specs and requirements for projects comply to the SCDF regulations
• Coordinate closely with client site personnels and safety coordinators
• Liaise with vendors in procurement of components
• Produce design drawings like SLD, Panel and String Layout using AutoCAD software
• Work with workers and installers to complete and commission projects
• Work with Business Development team to understand project requirements
• Any other ad-hoc duties as assigned

Requirements:

• Diploma/Degree/Certificate in Electrical/Electronic or Mechanical Engineering, Clean Energy Engineering or equivalent
• Fresh graduates are welcome, or candidate with some experience in the relevant field
• Candidates will undergo structured hands-on On The Job training under experienced PV Engineers
• Candidate must be willing to work in the Engineering and Construction industry.

Others:

• Work location: North area, Singapore
• 5 days’ work week

Responsibilities:

• To ensure all the maintenance works carried out systematically, efficiently & safely.
• By improving existing preventive maintenance system thus reduce maintenance cost and improve performance of equipment.
• To be the initiator and coordinator of MOC for any addition, modification and replacement in the system.
• To assist the Section Manager and Supervisor to co-ordinate and supervise the day to day activities.
• To troubleshoot Mechanical Equipment / Systems’ problems when it runs abnormally malfunction.
• To work closely with the operation team for daily, weekly and monthly maintenance programmed to maintain all equipment running efficiently, safely and smoothly.
• To train all technician and staffs on equipment maintenance and monitor the 5S and TPM activities carried out in the section.
• To assist the Section Manager to propose and implement action plans to rectify faults occurring in the system/processes.
• To be involved in new project management time to time and be responsible for document preparation and other paper works, as well as co-ordination with contractors & Vendors.
• To manage all Mechanical & electrical Instruments spare parts and tools.

Requirements:

• Bachelor degree in Mechanical Engineering
• Self-motivated, able to work independently and with a team to completion of tasks

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Please ensure you have submitted the additional information in the form below:

https://forms.afizan.com/index.php/476844?lang=en

We will not consider your application if this form is not submitted.

Position:

Network Engineer (Permanent)

We are seeking a highly skilled Network Engineer to join our dynamic team. The ideal candidate will be responsible for the design, implementation, and maintenance of our complex network infrastructure, ensuring optimal performance and reliability.

Responsibilities:

• Design and implement network solutions, including network topologies, routing protocols, and security policies.
• Configure and deploy network devices, such as routers, switches, and firewalls.
• Install and terminate network cables (CAT5, CAT6, etc.) and configure network ports and faceplates.
• Troubleshoot network connectivity issues, including hardware and software problems.
• Monitor network performance and identify potential issues.
• Perform routine network checks and maintenance tasks.
• Update firmware and software on network devices.
• Configure and optimize network devices to improve performance and security.
• Provide technical support to end-users for network-related issues.
• Respond to network alerts and incidents promptly.
• Document network configurations and troubleshooting procedures.
• Implement and maintain network security measures, such as firewalls and intrusion detection systems.
• Stay updated on the latest network security threats and vulnerabilities.

Requirements:

• Strong understanding of networking protocols (TCP/IP, DHCP, DNS, etc.)
• Experience with network devices from various vendors, including Alcatel-Lucent, Cisco, Juniper, Fortinet, Netgear, Dell EMC, D-Link, and TP-Link.
• Proficiency in network troubleshooting tools (Wireshark, Ping, Traceroute, etc.)
• Ability to work independently and as part of a team.
• Excellent problem-solving and analytical skills.
• Strong communication and interpersonal skills.
• Relevant certifications (CCNA, CCNP, CCIE) preferred.

Location:

Our office is located at 16 Raffles Quay; however, you will be required to travel to our client's sites across Singapore for work-related activities. We will cover the transportation costs between our office and the client's site.

Working Hours: 9:00 am to 6:00 pm, Monday to Friday, excluding public holidays.

Packages:

• Salary: $2,500 to $4,500, depending on experience
• Annual Leave: 14 days per year
• Sick Leave: 14 days per year
• Medical Insurance
• Variable Bonus

The Reliability Engineering Automation team prides itself in keeping Visa systems up and secure, catering to the 24*7 needs of the business. The team uses AI to aggregate observational data (from monitoring systems output, job logs, syslog, etc.) and data from ticketing, incident, and event management system data to produce a virtuous circle of continuous insights yielding continuous improvements and fixes The Staff Software Engineer, a highly motivated senior experienced individual contributor, responsible for innovative planning, designing and developing effective solutions in accordance with industry standards on best web development practices. As part of the team, you will be required to own key modules, perform code and design AI architectural reviews, suggest best practices and implement design and development standards. The role is a senior consultant who has the passion to solve problems, factor old codes, learn and pick up new technologies like generative AI, chatops, LLM, Onprem models. Model QA. The role will also be required to lead implementations on key modules and mentor junior team members,

Responsibilities:

• Have the passion in developing and supporting the growth of the next generation software architectures and inspire innovation within the team
• Develop scalable real-time low-latency Artificial Intelligence processing solutions in an agile delivery method
• Lead and guide the team in AI design, code and implement new algorithms to solve complex problems
• Develop AIOPS solutions using available tools and technologies and assist the global team in problem resolution by hands-on participation.
• Engage technical workshops with cross-vertical Technology partners for cross-vertical integration in software development

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Our client, a leading company in Singapore, is expanding. They value self-development, career progress and most importantly a healthy working culture. Join them in this exciting journey as a:

Assistant Project Engineer (BMS)

Job description

• Must have relevant experience in Building Management System (BMS).
• Have strong knowledge in designing a system for BMS system.
• Able to manage project cycle independently with minimum supervision.
• Work with external parties and customers to plan, organize and direct activities concerned with assigned projects.
• Develop project schedules in compliance with customer requirements, deadlines, and/or milestones; develop mechanisms to track schedule progress in the field; and update the schedule regularly.
• Responsible for site activities, coordination and supervision works related to engineering and systems design.
• Ensure timely completion of all projects particularly the T/C schedules.
• Responsible for project management including attending meetings, coordination, design and plan out shop drawing and submission of documentation and supervision.
• Liaise with consultants, architects and contractors and handle all technical matters.
• Ensure project works compliance with Workplace Safety and Health (WSH) policies and practices.
• Attending site meeting and coordination with stakeholders, external parties and customers to plan, organize and other related activities for the assigned projects.
• As and when to take on new assignments.

Key Requirements

• Degree / Diploma in Engineering equivalent
• Minimum 2 years of relevant working experience
• Have full understanding of Instrumentation HVAC/ACMV control like AHU, Chillers, RCU etc.
• Knowledge of PLC programming (preferably Siemens PLC)
• Experience in SCADA software and strong knowledge of Industrial Control and Building Management System.
• Prefer relevant working experience; prefer with LTA ECS/LCS, TVS project experience.
• Prefer with IEC 61508 and LTA documentation submission.

Remuneration:

• $2,800.00 - $4,500.00 per month

Work Arrangements:

• Work Location: In person

Please submit your updated and comprehensive CV to:

[email protected]

for a P&C discussion. Your CV should be updated and in MS WORD FORMAT ONLY (NOT PDF) with full career details, stating current or last drawn salary with full breakdown such as base, incentives, AWS, etc. and expected salary, contact details, educational qualifications, working experiences, reasons for leaving each past employment(s) and availability date.

For quicker processing, please indicate the position applied for on the subject header. We regret to inform that only shortlisted candidates will be notified. However, if you are not selected, we will explore other positions for you, in the near future. All applications will be treated with the strictest confidence.

What our client offers

Our client offers an attractive remuneration package, a fast-paced and exciting working environment and provides challenging opportunities for career advancement. They care about their employees. They are not just an employer. They are a Team. They do not just offer you a job, they offer you a career. By joining their team, you will find a strong purpose and deep meaning in everything you do. You will have the chance to make a real difference for customers, working alongside a passionate team of like-minded colleagues, while building your knowledge/skills and developing your career in a fun, dynamic and fast-growing organization.

Our client advocates fair employment practices, recruits talents based on merit and fit with their corporate values and complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. They are committed to achieving diversity and creating an inclusive working environment. They welcome all applications irrespective of social and cultural background, race, gender, age, religious belief or nationality.

Personal Data Protection Statement for Job Applicants

Please be informed that the personal data you provided by way of your job application to Grace HR Solutions will be collected, used and disclosed by or on behalf of Grace HR Solutions to determine or investigate your suitability, eligibility or qualifications for employment with Grace HR Solutions and/or its clients and manage your application for employment with Grace HR Solutions and/or its clients including identifying you as potential candidate for future suitable positions and/or notifying you of any such positions, either existing or in the future.

Thank You!

ANDY LUCAS | CEI No: R24123824 |

Grace HR Solutions | EA Licence No: 22C1305 |

UEN: 53456396A

Company Overview

Grace HR Solutions is a boutique professional recruitment consultancy involved in the recruitment of permanent, contract, and temporary positions. We are fully committed to achieving excellence in every assignment through leveraging our vast candidate pool, industry connections, and strategic insights. As the total recruitment and staffing solutions partner, our goal is to provide our Clients the best staffing solutions through an integrated database network supported by localized content and services. We strive to be efficient and effective in matching the right candidate to the right job. Reach out to us to discover even more about how we can help you with all your staffing needs or your own career

Job Type: Full-time

Pay: $2,800.00 - $4,500.00 per month

Schedule:

• Monday to Friday

Location:

• Singapore (Preferred)

Work Location: In person

Resident Engineer (RE-Mechanical/Electrical)

a. Minimum six (6) years of relevant experience as a mechanical and electrical engineer, of which at least 3 years shall be in supervision of works similar in nature to the Works, i.e. in particular major construction

works in buildings, services laying and testing and commissioning;

Resident Engineer (RE-C&S)

a. Minimum four (4) years of relevant experience as a civil & structural engineer, of which at least 3 years shall be in supervision of works in projects similar in size and complexity; in particular deep excavation and foundation, cut and cover tunnel works and building works;

b. Possess a civil and structural engineering degree recognised by the Professional Engineers Board of Singapore;

c. Accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore;

d. Lead C&S and/or geotechnical site staff to monitor, supervise and inspect works as directed by CAG, QP(S), SRE, the project consultants and FUI owners. He must possess good leadership qualities, organisational and inter-personal skills;

e. Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report;

f. Possess strong supervision and leadership skills;

g. Must be willing to work shifts.

HORIBA Instruments (Singapore) Pte. Ltd. is the Asean Headquarter of HORIBA Ltd., Japan, a global leader in advanced analytical and measurement technology. Instruments and systems made by the HORIBA GROUP set high quality and performance standards across a wide range of fields. At HORIBA, we believe dreams and hopes together with the marvels of technology create the future. We invite you to explore the future with us.

RESPONSIBILITIES

- Prepare service and spare parts quotations to customers enquiries

- Performing service tasks like in-house repair and on-site commissioning for various gas and water quality analyzer, CEMS and AQMS.

- Troubleshooting analyzer & advising customers on the best solutions in accordance with standard procedures and safety guidelines of HORIBA

- Creating and maintaining strong relationships with customers and provide good services support.

- Liaise and work with customers to address any service concerns and provide solution on the technical problems

- Support project team to perform Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) for project

- Identifying potential opportunities to get new preventive & maintenance contract

- Provide product training to end user and distributor

REQUIREMENTS

- Degree in Engineering (Mechanical, Environmental, Science, Electronics/Electrical Engineering or equivalent qualification)

- Preferably 2-3 years working experience or more in the analytical instruments or related field.

- Knowledge on gas analyzers, CEMS and water quality analyzer would be advantageous.

- Customer oriented with positive attitude

- Good planning and time management skills to achieve job efficiency.

- Preferably possess own transport

Resident Engineer (RE-Geotechnical)

a. Minimum four (4) years of relevant experience as a civil and/or geotechnical engineer, of which at least 3 years shall be in design/supervision of works in projects similar in size and complexity; in particular major construction works in cut and cover tunnels, deep excavation and foundation, ground improvement and works such as

installation of monitoring instruments and collation of monitoring data;

b. Possess a civil and structural/Geotechnical engineering degree

recognised by the Professional Engineers Board of Singapore;

c. Accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers

Singapore;

d. Lead C&S site staff to monitor, supervise and inspect works as directed by CAG, QP(S), SRE, the project consultants and FUI owners. He must possess good leadership qualities, organisational and inter-personal

skills;

e. Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission

of progress report;

f. Possess strong supervision and leadership skills;

g. Must be willing to work shifts.

Job Purpose

To be part of the development team for global IoT projects. We have set direction on global system integration, with local in-process Quality enhancement projects to be carried out in the next few years. The candidate needs to possess the necessary skillset and experience to work together with the team on the development, and implementation of these projects.

Nature of Scope

1. Software development mainly related to digitalization, and process quality enhancement.

2. Support end-users in usage of Plasma and SAP and help to resolve any operational issues, including working together with vendors (HQ and SAP Vendor) if necessary.

3. Understand in detail, the operation flow, and usage of all local existing systems.

5. Support migration Activities of Existing Plasma Info Server to SAP.

6. Support & ensure successful implementation of Company-wide Automation (ERP/IoT) Projects.

Experience

1. At least 2 years of experience in software development for factory or warehouse automation

2. Proficient in VB6 and VB.Net Programming, SQL Programming, Oracle DB and PHP Programming

3. Experience in SQL database design

4. Able to travel to Indonesia (Batam) / Japan for work when required

• Collaborate with all internal departments and suppliers to foster a quality-focused environment aimed at achieving zero-defect products.
• Lead and work with the MRB team on OSV activities to address supplier requests before initiating any RMA/RTV processes.
• Understand customer manufacturing quality requirements and align with business agreements to effectively manage supplier line rejections.
• Work closely with suppliers to expedite the return of defective products, follow up on disposition and FA reports, and coordinate with internal departments such as SCM, Quality, and Process.
• Ensure zero defects in quality on hand and manage aging periods effectively.
• Support parts localization and collaborate closely with the factory RD and engineering teams.
• Ensure compliance with RBA (Responsible Business Alliance) standards.

Requirements:

• Degree or Diploma in Quality or Engineering.
• Ability to effectively interact with customers, HQ/factory, peers, subordinates, and superiors.
• Knowledge of SAP.
• Capable of multitasking and working under pressure.
• Skilled in handling customer complaints and resolving quality issues with both internal and external departments.
• Ability to provide constructive solutions and advice to the team.
• Willingness to participate in conference calls outside of office hours if needed.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

• Expertise in creating and modifying BOM structures.
• Proficiency with SFC (Shop Floor Control) systems and SAP maintenance.
• Understanding of rack packaging design.
• Lead and facilitate BOM/materials changes, ensuring smooth transitions and implementations in collaboration with cross-functional teams both internally and overseas.
• Support production during mass runs.
• Lead or participate in Kaizen activities.
• Assist with factory NPI (New Product Introduction) qualification.
• Participate in both internal and external ISO audits.

Requirements:

• Degree or Diploma in Engineering with a minimum of 3 years of relevant manufacturing experience.
• Ability to effectively work with customers, HQ/factory, peers, subordinates, and superiors.
• Strong problem-solving abilities.
• Capability to work independently with minimal supervision.
• Proficient in project management.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

M&E Engineer is responsible for :-

JOB DESCRIPTION:

· Monitor and report on the progress of work to project manager;

· Control the progress of shop drawings, technical submissions and equipment/material procurement/fabrication/delivery status for on-time completion.

· Coordinate with client’s representatives, consultants, and subcontractors on all technical matters, including submission of method statement, drawings, materials, samples and work progress;

· Control site progress & installation quality as per approved;

· Carry out inspection of M&E works prior to concreting or subsequent construction works;

· Assist in supervising and coordinating work closely with other departments;

· Assist for submission of evaluation of progress claim, variation work to M&E Manager

· Participate in all relevant project meetings;

· Responsible for carrying out M&E technical meetings and resolving technical issues with record;

· Responsible for M&E drawing coordination and production of CSD and individual service drawings quality;

· Responsible for conducting inspection to meet with construction schedule;

· Provide and maintain all site inspection records & T&C records up to date;

· Ensure quality of MEP workmanship and compliance with safety and environmental requirements;

· Provide and maintain all site inspection records & T&C records up to date;

· Allocate work and ensure jobs are correctly and properly achieved within standards and SOP.

REQUIREMENTS:

· Diploma / Degree in Mechanical or Electrical Engineering;

· Min of 2 years’ work experience related projects in Singapore building and construction industry;

· Strong Electrical/Mechanical knowledge with hands-on experiences;

· Sound knowledge in BIM, Revit, Autocad would be an advantage;

· Good communication skills with the ability to coordinate with site teams to execute work

Suitable candidates are encouraged to apply this position via Apply Now button or WhatsApp 98158861

Only shortlisted applicants will be notified.

Singfilm Solar provides efficient and stable perovskite solar cells with long lifespans, driving the energy transition from fossil fuels to clean energy. With industry-leading technology and standardized production capabilities, we work to continuously advance the commercialization of perovskite solar cells.

The team is composed of outstanding researchers, including professors and Ph.D. graduates from the world’s top universities, as well as professionals from industry-leading institutions. We are looking for motivated individuals in the technology group, to participate in the development and characterization of new Perovskite PV products and materials.

This role will require a good understanding of PV cell and module performance factors, characterization methods and measurement methodology. The work may require the engineering of test setups, and familiarity with common semiconductor fabrication tools is advantageous.

Job Scope:

• Responsible for one or more fabrication processes

• Work with equipment suppliers to develop new capabilities

• Identifying and executing opportunities for process improvement

• Collaborate with team members to meet customer device specifications and technology development goals.

• Test result documentation and performance analysis.

• Job Requirements/Qualifications: Degree in Physics, Chemistry, Material / Electrical / Chemical Engineering or related subjects with 1-2 years of experience, but fresh graduates are welcome to apply.

• Prior experience in PV development, fabrication or semiconductors will be advantageous.

• Excellent written and verbal communication skills.

• Able to work in a lab and clean room environment.

• Good skills in data analysis.

• Must be target/KPI-driven and well organized.

• Good team player, participate actively in group discussions and shows initiative.

• Good interpersonal skills and ability to communicate effectively with technical and non-technical staff.

• Singaporeans and Permernant Residents preferred.

• Work closely with project team to assist Quality and Validation Manager Asia region to the tasks on schedule and within quality standard compliance.
• Responsible completion of the Quality, Cost, and Time validation functions for customer projects.
• Create and maintain qualification/validation documentation for mechanical, software, and hardware components from the design phase of projects.
• Oversee the qualification and validation processes for projects in conducting risk analysis, protocol drafting, and test implementation during FAT & SAT process internally and partners’ sites.

Requirements:

• Diploma in Mechanical Engineering or equivalent
• At least 2 years of quality and validation of automated systems experience.
• Proficient in MS Office (Excel, Word and PowerPoint).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303