• Thoroughly observe SPC parameters and control charts.
• Implement measures to enhance tool capability performance.
• Investigate quality issues and conduct initial troubleshooting.
• Escalate unresolved problems to the Supervisor and Technology Engineers.
• Manage the dispatch of products to the tool.

Requirements:

• Diploma in engineering or equivalent.
• 2 years of working experience in the related field.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

Responsibilities

• Assist Engineer/Supervisor to carry out MBO activities to meet department KPI in line with Business Plan and Division Objectives.
• Assist Engineer/Supervisor in process improvement for Yield, Quality and Productivity and Provide Engineering support on the respective processes assigned for new products and other cross functional activities.
• Carry out improvement activities or MBO for cost down, yield improvement, productivity improvement etc.
• Support the team involve QA and Production to resolve production line trouble.
• Perform data collection to generation of technical reports for customer product qualification and
  confirmation
• Assist Engineer in process development activities and optimization parameters by conducting DOE and analysis.
• Support prototype related activities, New Product, New Package, New Process and New substrate or Lead frame introduction.
• Assist or writing technical reports for customer product qualification, process evaluation,
  and DOE conducted.

Requirements

• Minimum Diploma in Electronic Engineering with 1-3 years relevance experience.
• Experience with semiconductor or IC package assembly is preferred.
• Willing to learn new equipment or processes.

Shift Type / Work Hours

• Normal Shift (5 days work week)
• 7.50am to 4.55pm

Benefits

1. Company transport provided at designated pick-up points island-wide.
2. Medical insurance and dental coverage.
3. In-house canteen at subsidized prices.

Please visit our corporate website for more information on Seiko Epson Corporation.

Email: [email protected]

We are looking for a Solar Project Engineer who is passionate about deploying solar energy in Singapore. The successful candidate will be in charge of executing solar projects on roof tops all across Singapore and the region.

Job Requirement

• Design, build and install solar energy systems
• Onsite planning and managing of installation teams
• Contact point between the company and client during construction stage
• Create and execute project work plans and revise as appropriate to meet changing needs and requirements.
• Hands on implementation on site
• Design the full construction from pre to post-construction and handover of the system to the client
• Complete assigned projects on schedule and within budget
• Identify any potential safety risks within projects and putting in place strategies to mitigate any risks
• Ensure all required Environmental, Health and Safety requirements are met.
• Prepares for engagement reviews and quality assurance procedures.
• Ensure smooth delivery of the project completion/SystemTurn On

Skills and Competencies

• Excellent communicator who is able to work independently
• Diploma/Degree in Electrical Engineering or related fields
• 3-5 Years of experience in project management
• Candidate with experience in solar project execution will be in advantage
• Knowledge in energy modelling software (PVsyst), Autocad and construction modelling software
• A team player who is results and customer oriented, independent, creative and passionate about renewables
• Singaporeans/PRs only

** ONLY Singaporeans/ PRs may apply ** No Agents Please**

Our Client is a well establisted Market Leader in the technology of solar renewable energy with efficient phase change cooling. As a Mechanical Engineer, you will responsible for the end-to-end product development cycle, including design, testing, and implementation of components. Conducts problem analysis, experiments, and ensures product compliance and safety.

• Permanent Position : Mechanical Engineer
• Salary :Attractive Remuneration + Bonus
• Location : West (Boon Lay)
• Working Hours : 8.30am to 5.30pm / 9am to 6pm, Monday to Friday

Job Description

1. Design and develop mechanical components, systems, and products.
2. Conduct thorough research to identify and implement new technologies and materials.
3. Collaborate with other engineering teams and professionals to ensure project success.
4. Perform calculations, simulations, and testing to validate design concepts.
5. Create detailed technical documentation, including drawings and specifications.
6. Evaluate and improve existing mechanical systems for efficiency and performance
7. Troubleshoot and resolve mechanical issues during testing and production phases.
8. Ensure compliance with industry regulations, safety standards, and quality guidelines.

Requirements

• Diploma or Bachelor's degree in mechanical engineering
• Experience working in the mechanical engineering field (Refrigeration & HVAC will be an added advantage)
• Superior computer skills, with solid experience in CAD, SOLIDWORKS.

Next Step

• Interested applicants may email your resume to [email protected] with your latest updated resume
• Only shortlisted candidates will be contacted

The opening is for a Linux shell scripting, WTX Interface developer who is able todesign, and give new solution for the upcoming changes to the existing as well as new assets/applications within the Services division.

This role is technology oriented, which includes defining development methodologies, hands on development for new projects/evolutions, production L3 (Developer level) support, providing technical solutions and performing POC for new relevant frameworks available in market.

Knowledge and experience in the Wealth Management (Private Banking) domain is a good to have. (Portfolio Analysis, Order Management and Advisory functions).

Responsibilities

• EPerform Business Analysis, interacting with various business representatives
• Write Technical specifications and design architecture for other team members to do developments
• Build and maintain TECH interface object developments (Shell Scripting, WTX maps, Oracle plsql , SQL dbases queries) with various other applications
• Prepare technical deliveries and support implementation by integration teams.
• Perform technical testing of PMS domain systems (formalization in ALM System)
• Propose solutions and improvements
• Contribute to key and strategic projects
• Contribute to Support Activities
• Perform Project Management activities
• Perform quality reporting and controls in line with the Team’s QACMP
• Systems and processes under the responsibility of the team : WTX maps & Shell Scripts,
• Serena process, AS400 FN, Batch Reporting, Batch/Online Jobs scheduling, Environment Management within Services Dvision.

Profile

• Bachelor degree (with major in computer science or finance)
• 5+ years experience in the private banking or asset management industry
• 5+ years experience in IT Development activities
• Prior experience in technical interfaces between applications
• Expertise in SQL queries, IBM Websphere TX, Shell Scripting and Java API

Other Value-added Competencies :

• Working in Agile / Scrum methodology (Good to have).
• Temenos Triple’A Plus product experience is a strong advantage.

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

About the role

Act as delegated technical authority for Engineering and part of Shift Cross Functional Team to review and resolve promptly to ensure operational flow on technical issues/problems/arisings to meet operation requirements for safety, cost, delivery rate and leadtime (SQCD).

Job Description

• HSE – Practice full compliance to Health, Safety & Environmental Standards and meet the expectations of the Zero Harm programme.
• Product Safety – Understand product safety risks and work on mitigation to meet the required safety levels supporting requirements of the Company’s Safety Management System.
• Quality – Perform investigation on Engines/Modules and piece part level (including component repair) rejected from service. Produce Technical Summary on strip findings and work performed on Engines and Modules including investigation. Support findings review & provide technical disposition to problems.
• Lean/Improvements – Identify opportunities for new or improved manufacturing processes to meet current or future requirements. Identify, capture and share best practice; capture and utilize lessons learned working closely with Operation & Cell Manufacturing Engineers.
• Lead – Act as Technical Authority for engineering during the shift using standards set to make quick/prompt technical decisions in relation to the area of accountability.
• Delivery – Manage related technical variances of con-conformances during operational processes (ERRN review & TV request managements including PAF).
• Delivery – Review and resolve promptly to ensure operational flow on technical issues/problems/arisings to meet operation requirements.
• Delivery – Workspace creep management control that deviates from standard including Work Instructions Clarification.
• Delivery – Support FAIR, MSA and time study activities in shift.

Requirements

• Required to work on rotating shift
• Willing to work in Changi area
• Degree in Mechanical/Aerospace Engineering discipline or equivalent (Candidates with relevant Diploma and work experience may be considered)
• A good team player with good communication skills
• Possess good analytical and technical problem-solving skills
• Good knowledge of material and component repair processes would be useful

COMPANY DESCRIPTION

Grocery Logistics Singapore (GLS) a wholly owned subsidiary of FairPrice Group Supply Chain, is a well-established logistics player in the Fast Moving Consumers Goods (FMCG) segment, incorporated since January 1993. Other than being the key logistics provider for NTUC FairPrice and its subsidiaries, we had serviced the Dairy Farm Group, Royal Ahold Group (since exited from Singapore Markets) and many small supermarket chains since our establishment.

RESPONSIBILITIES

The role which is part of the Supply Chain will be responsible for maintaining and improving existing automation capabilities, as well as developing a team of automation and maintenance technicians under the incumbent's charge.

Job Description

• Responsible for testing, operate and maintain automated machinery
• Involve in developing and implementing Logistics System, improvement upgrades, maximize efficiency, control maintenance costs and reduce downtime.
• Prepare project materials, cost analyses, estimate yearly retrofit budget and Spare parts management.
• Train the maintenance staffs for new work methodology, observe team's Safety requirements and provide necessary instructions.
• Maintain the reliability and the performance of the all automation and networks systems in the automation layer.
• Utilize equipment Error logs, Event reports, and analysis data from computerized maintenance systems to track equipment reliability.
• Daily checklists review, records equipment PM Work on internal and external service teams.
• Maintain liaisons with other departments to provide necessary support and assist regular MOM PE inspection.
• Able to communicate with oversea IT Online support, Hotline Software Engineers in UK, Australia, Italy and understand the steps to follow up during the troubleshooting with minimum guidance

• Diploma/Degree in Mechatronics, electrical engineering, mechanical engineering or similar field.
• Experience in automation control products such as Siemens IPC, PLC, HMI, SCADA, TIA portal, Various drives and Software hardware. Knowledge on Auto CAD, Microsoft PowerPoint and Operation System knowledge will be preferred.
• Experience with automation equipment such as Conveyors, Lifter, ASRS. Food Procession machines and robotics systems.
• Skills on the electrical testing equipment, dB readings, Inverters settings, Calibration.
• A highly motivated, self-starter with the ability to work under pressure and Cold Room environment in order to complete the daily Operation functions. ie, Ensuring 24-7 Up running, fast moving technologies, new concepts, complex systems and operation timescales will influence your day-to-day work.
• Strong time management skills, self-motivated and able to complete Logistics Maintenance projects, repairs or troubleshooting.
• Hand-on troubleshooting expertise and attention to details.
• Strong leadership and problem-solving skills.
• Proven work experience in Industrial Automation System.

• Work location: 7 Sunview Road
• Working hours: Monday to Friday, 8:15am - 5:35pm (will move to rotating shift cycles in future)
• The position would need to be on standby for urgent/ad hoc work outside of working hours due to business needs.

Responsibilities:

• To take charge of the Ducts and Manholes Implementation and Maintenance Works.
• To coordinate underground ducts and manholes implementation works with external parties.
• To support Plant Maintenance and Operation on Civil & Structural (C&S) matter / C&S engineering SME.
• New Development and Diversion of Services:
• Take charge and coordinate Service laying with main project team (Developer, Main Contractor) and authorities, including deconflicting with others for new build and diversion.
• Project Manage the implementation of underground ducts and Manholes within new development and service diversion.
• Review method statement and coordination drawings and other relevant construction documents.
• Review 3rd party submission on matters related to company's Underground Services.
• Support Facilities and Maintenance team on Civil & Structural related issues.
• Participate in tender, contract administration.
• Any other duty as assigned by his/her superior.

Requirements:

• Recognized Civil Engineering Degree with minimum 3-year engineering/construction experience.
• Diploma holders in Civil Engineering with extensive relevant experience will be considered.
• Experience in infrastructure(Road works) projects and its geotechnical aspects.
• Exposure in Service coordination with Authorities and Service providers.
• Good understanding of Specifications, contracts and ability to read and interpret engineering drawings and engineering reports.
• Ability to review Method statement. Ability to generate method statements is preferred.
• Effective communication skills, proficiency in Microsoft Office and Excel and willing to learn.
• Job Reference: L477776V

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

Tel: 6950 9754

EA Registration Number: R22110899

EA License number: 02C4944

EA Personnel: Celeste Wong Xin Yann

• Possess a recognized degree in Civil Engineering with at least five years of relevant
• experience in building projects.
• Possess the full knowledge and experience in organizing, managing and executing C&S
• works.
• Able to comprehend all technical elements, such as BIM, drawings and specifications.Perform construction planning, coordinate with the client, sub-contractors, consultants
• and Authorities on all project aspects.
• Develop detailed work plans and cost estimations for a practical forecast of cost and
• workforce requirements.
• Assist Project Manager in preparation of reports.
• Lead, coordinate and manage civil and structural works of a project.
• Prepare, monitor and review site work programs.
• Plan and schedule the works and resources for a project.
• Lead and resolve all on-site technical and engineering matters.
• Ensure that the works are performed to meet the company’s ISO standards and
• contractual requirements.

• Possess a Diploma/Degree in Engineering or Building Science with at least 3 years knowledge in QM/CONQUAS requirements.
• Implement and monitoring QA/QC System.
• Produce Non-Conformance Reports.
• Track and monitor subcontractors’ quality and performance.
• Guide subcontractors to achieve Quality and CONQUAS requirements.
• Assist CONQUAS Manager in day to day quality control and assurance, in structures, M&E and architectural works.
• Maintain up-to-date test and inspections with RE/RTO’s.

Job Summary

Imagine what you could do here. At Apple, new ideas have a way of becoming phenomenal products, services, and customer experiences very quickly. Bring passion and dedication to your job and there's no telling what you could accomplish! The success we are striving will be the result of very skilled people working in an environment which cultivates creativity, partnership, and thinking of old problems in new ways. If that sounds like the kind of environment that you find intriguing, then let's talk! We design, develop, and launch next-generation Sensor Technologies in Apple products. The Sensor Hardware team develops sensor solutions and technologies for a variety of Apple products such as iPhones, iPads, and Macs. The key goal of the Sensor Technology team is to enable the world’s best user-experience. New challenges arise every day that require the sharp problem-solving skills of hardworking and experienced individuals. Are you in for these challenges? The team features a collaborative and hands-on environment that fosters engineering excellence, creativity, and innovation. We are looking for Optical Hardware Development Engineers with strong background in optical design, characterization, data analysis, and system-level troubleshooting to help develop new sensors and sensing systems for future Apple products. Join us in crafting solutions the world doesn't know of yet.

Key Qualifications

• Multi-disciplinary understanding of optics, general physics principles and basic EE concepts.
• Strong opto-electrical experience on lab measurement, characterization, and failure analysis, to drive key design feedbacks and decisions.
• Expertise in ground-up development of custom optical setups using advanced tools in optical / electrical metrology, including free-space optics, spectrometers, light source, photo detectors and associated analog signal conditioning/amplification etc. Hands-on alignment experience is a plus.
• Experience in optical design, analysis, optimization, and tolerancing using ray-tracing software (LightTools, Zemax, etc). Custom fixture mechanical design (SolidWorks, AutoCAD, etc) is a plus.
• Excellent written and verbal communication skills, and solid teamwork and leadership skills.
• Competency with scripting (Matlab, Python, C, etc) for modeling, automation, data acquisition, and data analysis.
• Industry experience in miniaturized optical systems design, validation, and volume manufacturing support is preferred.

Description

• Design and develop groundbreaking optical sensor solutions from concept to production.
• Develop, qualify, and operate custom characterization tools for optical system design and performance validation.
• Product and system simulation/analysis using a variety of software tools to support engineering development, validation, and characterization (e.g., LightTools, Zemax, Lumerical, Matlab, JMP etc.).
• Lead failure analysis of optical modules and corrective actions with cross-functional engineering teams and suppliers.
• Author regular technical communications for executive and cross-functional briefings.
• Business travel to support product development and supplier teams as necessary.

Education

Degree in Optics, Physics, or Electrical Engineering. M.S/PhD, or B.S. with proven hardware development experience.

How Will You Make an Impact?

​Thermo Fisher Scientific Inc. (NYSE: TMO) is the world leader in serving science, with annual revenue of over $40 billion.

Everything we do starts with our Mission: to enable our customers to make the world healthier, cleaner, and safer.

The nature of our business is to enable growth and innovation within the global scientific community and to help researchers, organizations, and companies tackle some of the world’s most pressing issues. We do that by providing ground breaking technologies and services that are the result of our significant investment in research and development.

We believe crafting a better tomorrow starts with the action we take today, and we continually strive toward improvement and excellence for the benefit of our customers, our colleagues, and the world.

What will you do?

• Use systems engineering approaches, we partner with the R&D/technical lead to guide the project team to research and develop life science systems to address sophisticated challenges and/or improve customers' workflow.
• We initiate and guide discussions with key partners to generate requirements
• We refine and manage requirements to ensure they are timely implemented at different stages
• We support the development team in feasibility studies and concept selection through concept testing activities
• We lead system integration activities to ensure a smooth and timely transition from design to operations
• We partner and support our regulatory affairs representative during product development to meet relevant ISO and FDA standards and guidelines
• We undertake and address vital tasks to achieve the product launch objectives

How will you get here?

Education / Experience

• Minimum bachelor’s degree in electrical/electronic or mechanical engineering field
• At least 5 years of R&D experience in either product design, medical device consumable development/manufacturing or systems engineering

Knowledge, Skills, Abilities

• Experience in the field of Gene/Cell Therapy or relating instrumentations and technologies e.g. electrophoresis, electroporation etc. will be an added advantage.
• Experience in development and manufacturing of consumables for sterile use
• Knowledge in medical or cell/gene therapy regulatory standards are useful.
• Hands on ability with acute analytical and trouble shooting skills are vital to succeed in the role.
• Proficient in communication and collaborators’ management
• Work well with team members from a diverse set of backgrounds and teams.
• Proficiencies in general Engineering, instrument/consumables manufacturing subject areas.

Our Mission is to enable our customers to make the world healthier, cleaner and safer. Watch as our colleagues explain 5 reasons to work with us. As one team of 100,000+ colleagues, we share a common set of values - Integrity, Intensity, Innovation and Involvement - working together to accelerate research, solve complex scientific challenges, drive technological innovation and support patients in need. #StartYourStory at Thermo Fisher Scientific, where diverse experiences, backgrounds and perspectives are valued.

Apply today! http://jobs.thermofisher.com

Join the family and be a history-maker!

Fast-paced and growing electronics company starts a new journey in Singapore, building our team and facility in Genting Lane.

White Horse Laboratories is an electronics testing and quality control company providing a turn-key solution to our clients. Internationally recognized, White Horse is a leader in global electronics quality and supply chain management with a cohesive global family of over 100 bright and determined individuals.

We are recruiting for the following position:

Test Engineer – A dynamic, results-oriented team leader with hand-on experience in electronics manufacturing and exceptional communication and analytical skills.

Basic Requirements:

• Can demonstrate Test equipment specific know-how.
• Has knowledge of test hardware and software development and troubleshooting technique.
• Can demonstrate the level of test expertise (for example: Digital, Analog)
• Can write clear test plans.
• Can identify key parameters from a device specification.
• Can determine appropriate test methods for key parameters.
• Has knowledge of various EEE component technology concepts.
• Can demonstrate knowledge of use of accuracy, resolution and repeatability concept.
• Has some statistical knowledge and be able to analyze data (mean, standard
• Can demonstrate good handling and ESD practices.
• Has experience with multiple device types.
• Has familiarity with the use of various test equipment; for example: ATEs, network analyzers, signal generators and digital oscilloscopes.
• Can display working knowledge of the use of documented industry standards, methods, and access to that information for the capabilities a test facility is stating the qualification for testing. For example: Data Sheets, MIL specifications, Performance specifications and SMDs.

Other Requirements:

1. Have a minimum of Bachelor’s Degree in Electronics Engineering.
2. Experience with 2 years + on testing for regulators, operational amplifiers, converters, sensors, relays
3. Experience with Programming, PCB Layout and building fixtures.
4. Experience with product characterization, parameter testing and hardware design.
5. Experience in Semiconductor Testing from test creation to hardware building
6. Familiar to use instruments, included: oscilloscope, power supply, picoammeter, source meter, multimeter.
7. Familiar with ATE (Automatic Test Equipment) and JTAG (Joint Test Action Group).
8. Has a Technical degree or training pertinent to the Test Engineering discipline

We offer competitive salary, bonus, annual leave increments, and other family-oriented benefits in a working environment that fosters professional development and innovation.

We want you! Don't hesitate to apply now.

Responsibilities:

• Carry out feasibility, conceptual, preliminary and detailed design for mechanical/electrical services for public and commercial projects
• Design the layouts of M&E plantrooms, mechanical/electrical services, M&E services routings, M&E services points and fixtures
• Carry out consultations with local authorities and agencies
• Prepare tender specifications and review tender drawings
• Perform contract administration work
• Manage projects progress, identify any non-confirmation of contractor’s work at site
• Manage testing and commissioning of M&E systems
• Attend/Chair technical and progress meetings with clients, consultants and contractors

Requirements:

• Bachelor’s Degree in Mechanical/Electrical Engineering (recognized by the Professional Engineers Board of Singapore)
• Minimum 5 years of experience in carrying out designs of mechanical services, project management and supervision
• Conversant with the codes of practice and regulations related to building services is essential
• Team player and ability to work with and manage clients and contractors

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

Our Selling Points

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Successful candidates can look forward to working in the forefront of next generation factory with exciting new opportunities to work on innovative repairs for next generation aero gas turbine engines with state of the art automation and digital platform.

Responsibilities

• Manage the conceptualization, development, validation and implementation of new repair technologies
• Manage the acquisition, delivery and commissioning of capital equipment, turnkey solutions and ancillary fixtures/ tooling for implementing new repair processes
• Implement and deliver new repairs by designing and fabricating repair fixtures/ tooling; developing process parameters; and validating repair set-up through First Article Inspection
• Provide technical assistance to all functional departments to meet business objectives
• Any other duties as assigned by supervisor

Requirements

• Bachelor’s Degree in Manufacturing, Material Science, Mechanical engineering or related field
• Good knowledge in component repair processes (welding, machining, painting, inspection etc)
• Possess good communication, analytical, engineering and project management skills
• Good technical problem solving skills (Six sigma), takes ownership and hands-on approach
• Familiarity with digital manufacturing and/or proficiency in CNC programming is an advantage
• Able to multi-task and work well under pressure as an individual/ team
• Ideally 3 years’ experience in a similar capacity in the aviation industry. Fresh graduates and experienced engineers from non-aviation industry are welcome to apply

COMPANY DESCRIPTION

Singapore Management University is a place where high-level professionalism blends together with a healthy informality. The 'family-like' atmosphere among the SMU community fosters a culture where employees work, plan, organise and play together building a strong collegiality and morale within the university.

Our commitment to attract and retain talent is ongoing. We offer attractive benefits and welfare, competitive compensation packages, and generous professional development opportunities all to meet the work-life needs of our staff. No wonder, then, that SMU continues to be given numerous awards and recognition for its human resource excellence.

RESPONSIBILITIES

• Data Collection: Large-scale data collection related to code ownership policies on GitHub.
• Data Analysis: Analyze collected data to identify usage patterns and impacts.
• Workflow Automation Programming: Develop an automation system for code ownership recommendations.
• Evaluation: Conduct system effectiveness tests and refine based on results.
• Documentation: Prepare reports and research papers on the project.

• Minimum Bachelor's/Master's degree in Computer Science, Information Technology, Information Systems or closely related disciplines.
• Proficiency in programming languages, with advanced skills in Python required and familiarity with JavaScript beneficial.
• Demonstrated experience in software engineering practices, including version control, code review processes, and secure coding practices, with a strong preference for candidates experienced with GitHub.
• Experience with workflow automation systems, such as GitHub Actions, is preferred.
• Experience with using APIs for data collection and analysis is preferred.
• Knowledge of data science methodologies and statistical analysis tools is preferred.
• Good analytical, technical, and problem-solving skills, with a particular emphasis on strong critical thinking abilities and applying theoretical knowledge to practical software security challenges.
• Applicants with research publications in software engineering or related fields will be advantageous.
• Effective communication skills, both written and verbal, for documenting research findings clearly and collaborating effectively with team members and the wider community.
• Self-motivated individual who can work independently and also collaboratively with team members, demonstrating the ability to take initiative and contribute positively to team dynamics.

#LI-XL1

• Assist Principal Project Manager (PRPM)/Senior Project Manager (SPM)/Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on-site quality and safety issues
• Determine any non-conformances on works
• Liaise with the Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on-site issues are conveyed to the Contractor within a reasonable timeframe
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggests quality improvement measures for implementation on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Assist in the operating of the PMCC

Requirements:

• Min Degree in Civil & Structural engineering
• Min 2 years of viaduct and/or flyover or cut and cover tunnel experience in a project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Experience in civil/structural/geotechnical design will be an advantage.

ALTEN Group is a world leader in Engineering and Technology consulting services providing outsourced Engineering, R&D, and IT Services for different industries such as Transportation, Defence, Energy and Security with 55,000 engineers in nearly 35 countries. ANOTECH is the subsidiary of the Group delivering ALTEN's Engineering Services in Singapore.

As a System Engineer, He/she is responsible for the testing and integration of complex systems within industrial clients.

Responsibilities

· Responsible for the Planning and Execution of integration, verification and validation activities

· Provide support on the appropriate test strategy, modules and practices

· Creates the System Test plan and report

· Works closely with Project Engineers (SEM) to agree on testing durations and project risks

· Efficiently manages test resources (staff, software & hardware)

· Manages Defects / Engineering Changes

· Contributes to the estimation, planning and execution of of integration, verification and validation activities

· Be able to coordinate activities with a global team

· Participate in Bid activities providing scope and costing

Requirements

· Bachelor's degree in Engineering or related field with 5-9+ years’ experience,

· Minimum of 5-7 years related experience and/or training in Verification/Validation experience in large integrated systems

· Previous knowledge of Unix /Linux/ Android systems

· Knowledge of communication networks (wired or wireless)

· Expertise in defect reporting, characterization, and management workflows - Use of common defect management and tools

· Ability to read and interpret requirement documentation - Use of common requirements management and tools

· Project Management and communication skills

· Creativity in detecting and provoking possible problems

· Expertise in common test practices (Functional tests, user scenario tests, automation)

· Previous experience writing test cases

· Comfortable with handling and performing basic troubleshooting on IT software & hardware

• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in geotechnical and deep excavation works
• Degree in Civil Engineering
• Accredited as a RE with IES

Responsibilities & Requirements:

• Able to work independently as well as in a team to meet tight project timeline
• Conversant with local codes and regulations
• Well experience in engineering software would be an advantage
• Degree in Civil or Structural Engineering
• Preferably with minimum 2-3 years design experience in Civil & Structural consultancy firm for geotechnical design works such as deep excavation design, foundation design, earthwork design and etc.
• Candidates with more than 5 years design experience may apply for Senior position

Job Description

• Conversant with local codes and regulations
• Well experience in engineering software would be an advantage
• Able to work independently as well as in a team to meet tight project timeline
• Coordinate with external consultant and provide technical support for design
• Prepare design report & attend meeting to resolve technical issue with external parties
• Ensure design, drawings and all other deliverables as contained in the consultancy agreements are compiled and meeting all the criteria & parameters set

Job Requirements

• Degree in Civil or Structural Engineering
• Preferable with min. 2 years design experience in C&S consultancy firm
• Well experience in engineering software would be an advantage
• Conversant with local codes and regulations
• Able to work independently as well as in a team to meet tight project timeline
• The candidate with more than 5 years’ experience shall be considered for executive engineer/senior engineer position

Procurement Engineer (NPI Project)

Work Location: Yishun Industrial Park A [Canberra MRT] / Have company transport

Salary: $4500 - $5500

Working Days: 5 Days // 8am/8.30am - 5.30pm/6pm

Job Responsibilities:

• Provide cost estimation for Mechatronics/ PCBA / Cables/ E&E modules.
• Support R&D in selecting components/ Source include recommendations on potential new technologies for the purpose.
• Monitor procurement processes as well as control of resources and activities in support of quality, cost, and delivery requirements at NPI projects.
• Support product cost optimization at the management of procurement in key areas such as strategies, supplier selections, inquiries, negotiations, and drift cost calculations.
• Coordination between internal and external stakeholders with selected suppliers on necessary technical information, etc drawings, data sheets, STEP files, to ensure the alignment in costing and delivered materials.
• Recommend the promotion of material status from stages of manufacturing freeze until series.
• Organize for design to cost (DTC) or cost reduction processes via structural cost analyses.
• Support Advanced Purchaser/Operative Purchaser in event of escalations during material orders/ deliveries and complex engineering changes. This will include direct supplier coordination/ communications.
• Knowledge transfer to commodity managers of materials from prototype to production stage.
• Execute assignments from the managers

Job Requirements:

• Degree (with relevant experience) in Electronic / Electrical Engineering, preferably with R&D background but not a must.
• Experience from Original Equipment Manufacturer or Contract Manufacturer will be added advantage
• Possess project management experience especially on PCBA
• Experience in BOM / Costing / Engineering analysis and supply chain management

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Job Description

• Define requirements, specifications and testing criteria for perception algorithms based on customer inputs

• Develop traditional algorithms or AI models for Vision, LiDAR and multi-sensor fusion based perception for autonomous driving

• Object Detection, Semantic segmentation and Multi-target tracking

• Sensor fusion of LiDAR, Camera and Radar

• Evaluation and benchmarking of algorithm performance

• Data and Ground truth preparation

• Detailed Reporting and Documentation

Education and Experience

• Bachelor’s / Master’s degree in computer science or related field.

• Experience of Vision and LiDAR data processing

• Image/Point cloud data pre-processing

• Object recognition and Segmentation

• Extensive experience of one or more of the following

• Deep learning applied to vision, LiDAR

• 3+ years of experience in C++/ Python software development

Preferred Skills

• Experience in the field of robotics, automotive systems

• Proven track record of publications in relevant conferences

• Excellent analytical, communication and writing skills

• Working hour: 9am--5:30am Mon-Fri, 9am--12pm Sat(Once a month)
• Location: Tuas West
• Marine MNC company

Job Description:

• Perform engine repair work, engine testing, engine commissioning, and troubleshooting for power generation engines (both land-based and marine) and main propulsion engines.
• Conduct mechanical repair and troubleshooting tasks for equipment such as MHI Deck cranes, Mooring Winches, Kamome Propellers, Thrusters, and Kawasaki Thrusters.
• Generate service reports detailing findings and recommendations as necessary.
• Offer technical support to site engineers as required.
• Provide technical assistance to customers when needed.

Job Requirements:

• Diploma in Mechanical Engineering.
• Ability to read and understand basic mechanical diagrams.
• Proficiency in Microsoft Office applications (Word, Excel, PowerPoint).
• Fluency in Japanese is essential as the role involves direct communication with Japanese clients, ensuring effective and accurate exchange of information.
• Willingness and ability to travel domestically and internationally by flight or by sailing with vessels.
• Capability to work outdoors and onboard vessels and stations located overseas.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” to submit your resume.

We regret only shortlisted candidates will be notified.

Stafflink Services Pte Ltd

EA Licence No.: 04C4294

EA Personnel: Chua Xue Min (Joesefyn)

EA Personnel Reg. No.: R23113090

Key Responsibilities:

Design, develop, and debug embedded software solutions using C/C++.

Collaborate with hardware engineers to integrate software with hardware components.

Implement and optimize software for embedded systems on Linux OS.

Write efficient and maintainable code for embedded platforms.

Conduct thorough testing and debugging of embedded software solutions.

Document software designs, processes, and procedures.

Must-Have Skills:

Proficiency in C/C++ programming languages (average to strong).

Experience in developing embedded software using C/C++ (in school or work).

Hands-on experience with developing C/C++ on Linux OS.

Good-to-Have Skills:

Experience in developing embedded software on ARM processors.

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)