About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You are responsible for identifying, assessing and advising on risks arising from the workplace health, environmental and/or work processes, recommending measures to eliminate or minimize and control the risks and implementing the measures.

Key Responsibilities

• Conduct job and environment hazard and risk assessments, perform workplace evaluations, and implement corrective and preventive actions
• Apply relevant licenses, conduct tests and provide necessary inspection reports on environment and safety to drive improvement
• Lead and continually review existing and new Fab processes and equipment for EHS compliance, including managing waste, air, water, chemicals, gas and others
• Manage semiconductor process safety, establish Environment, Health and Safety (EHS) culture, implement and enhance the EHS program for employees and contractors
• Perform regular and ad-hoc inspections. audits and supervise hazardous operations safely
• Lead and facilitate ERC (Emergency Response Committee) related activities such as factory emergency response, fire, gas leak and others
• Collaborate with relevant departments for ISO14001, ISO45001, ISO14064, and ISO50001 management systems certification and compliance
• Provide technical, regulatory and process guidance to address emerging EHS issues

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Engineering or Science background including Occupational Safety, Chemical Engineering or Chemistry, environmental science and emergency response or management
• Minimum of 3 years of experience in semiconductor, electronics manufacturing, or other chemically intensive manufacturing industries and regulatory compliance preferred.
• Possess industrial safety, environmental protection, and fire protection related certificates
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months

Key Skills and Attributes

• Strong analytical skills and able to work under pressure in a fast-paced environment
• Good interpersonal, leadership and communication skills to work effectively across functions and geographical teams with diverse background
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible for successful customers’ product full lifecycle, including but not limited to, technology transfers, new products introduction, device performance, yield, and reliability of our advanced technologies

Key Responsibilities

• Take charge for successful new products qualification and technology transfers from motherfab
• Complex data analysis to identify process design weaknesses and/or manufacturing tool issues.
• Design and execute experiments, analyse complex data sets and derive actionable insights to improve yield and performance for each specific technology and/or products
• Collaborate with the engineering teams to maintain process stability and provide technical solutions to customers

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Minimum of 4 years of experience in silicon process flow enhancements and managing process shifts, changes with design rules and product layout, ensuring optimal yield, electrical test and product performance with short-and long-term reliability implications considerations
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

Job Highlights:

• Working with world's leading company in SMT / PCB / semiconductor industries.
• Attractive salary package: AWS, variable bonuses, comprehensive medical coverage.
• Career growth opportunities with trainings provided.

About the Company:
Our client is a global technology company and a market leader that develops and provides leading-edge solutions in surface mount technology, equipment and materials for the semiconductor assembly and packaging industries.

Role Overview:
Join our client's dynamic team as a Software Engineer or Senior Software Engineer, where you will develop and manage cutting-edge solutions for SPI, factory line systems, and associated modules. The role demands technical expertise, creativity, and a strong focus on quality to deliver scalable and maintainable software solutions. Senior candidates will additionally lead complex design tasks, mentor junior engineers, and drive innovation in a competitive landscape.

Key Responsibilities:

• Design, develop, and maintain software solutions for SPI and factory line systems, focusing on quality and scalability.
• Provide effective solutions for production units and address customer requirements with a balance between functionality and time-to-market.
• Solve complex engineering problems using innovative approaches and technical analysis.
• Conduct technical reviews and provide evidence of appropriate solutions to customers.
• Stay updated on industry trends through continual professional development.
• Guide junior team members (for Senior roles) and support their growth.
• Perform any additional ad-hoc duties as assigned.

Requirements:

• Bachelor/Master Degree in Engineering or a related discipline.
• A minimum of 3–5 years of relevant working experience, depending on the role.
• Strong experience in software design, analysis, and validation of engineering requirements.
• Proficient in C++, UML, and the appropriate usage of design patterns.
• Familiarity with Source Control Systems, Visual Studio, and Software Development Lifecycle.
• Knowledge and experience in hardware systems, real-time control systems, Unit Testing, Dependency Injection, and WPF are advantageous.
• Demonstrated ability to balance functional design with time-to-market considerations while maintaining scalability and maintainability.
• Senior candidates should have experience mentoring junior engineers and leading complex software design tasks.

How to Apply:

Interested candidates, please submit your updated resume by using Apply button

**We regret to inform that only shortlisted candidates will be informed.**

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Engineer/Engineer to be part of our Product Engineering diverse team of talent. You will be responsible for yield, quality and reliability issues of devices.

What you will be working on:

• Resolve yield, quality and reliability issues in the qualification of new devices
• Perform pre-tapeout risk assessment and communication with Business line/ Fab on the necessary actions to eliminate/ minimize risk
• Conduct product yield analysis to identify root causes of wafer sort and final test failures
• Work with Customers and Account Managers to maximize die output
• Establish product low yield criteria and dispositioning
• Provide product engineering support to failure analysis lab for electrical fault isolation
• Provide product engineering support to reliability lab to understand and resolve reliability failures
• Compliance to safety, discipline and housekeeping rules
• Support cost reduction through yield improvement and resolving excursion
• Participate in continuous yield and productivity improvement projects

More About You:

• Bachelor's Degree in Engineering (Electrical/Electronic) or equivalent
• 2 years of relevant product engineering experiences in front-end wafer fab environment or
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical and problem solving skills
• Good communication and interpersonal skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a MECHANICAL ENGINEER/ SENIOR ENGINEER to be part of our FACILITIES DEPARTMENT diverse team of talent. You will be responsible for HVAC systems, Clean Room, Building services and maintenance.

What you will be working on:

• To provide facilities support pertaining to Clean Room, Chillers and HVAC systems, Environmental Protection Systems, Process Utilities Supply Systems, Building Services and Maintenance, and other miscellaneous mechanical and facilities systems to wafer fabrication so as to ensure continuous supply of utilities and related facilities at the required performance level or specifications
• Formulate, implement, review and improve preventive and predictive maintenance programs for systems in charge so as to ensure that the systems function as intended at all times
• Carry out repair and troubleshooting of systems in order to restore systems to their operating conditions in the shortest possible time. Carry out root cause analysis and implement action plans to prevent recurrence
• Able to formulate effective reporting and tracking systems for monitoring of system performance and capacity usage. Recommend and implement improvement/enhancement projects where appropriate.
• Formulate, implement, review and improve operating procedures so as to ensure optimum operation of systems
• Monitor and review utility consumptions and work with users to implement projects to reduce the consumption where possible
• Knowledge of all relevant standards, legislations, codes of practice etc and ensure their compliance
• Provide guidance and training on the systems in charge to fellow colleagues so as ensure adequate working knowledge and system backup
• Ensure plant histories, drawings, data and other appropriate documentations are being generated and properly filed for future reference and review.
• Evaluate and recommend appropriate spares, consumables and other resources necessary for the day-to-day operation of the systems.
• Conduct project supervisions.

More About You:

• Master / Degree in Science, Mechanical Engineering, Building or equivalent. Preferred candidate with SCEM certification.
• 5 years of relevant working experience in semiconductor, pharmaceutical or petrochemical industry. Hands-on experience in day to day operation and maintenance essential.
• Experienced in managing cleanroom (Class 100 environment) systems
• Person shall act as SME for ACMV system. Person must have sound knowledge of operation and maintenance of Clean room areas and ACMV system
• Provide building services and maintenance, including building facilities repair and upgrading, housekeeping, landscaping and pest control.
• Knowledge of maintenance principles and good engineering practices.

Responsibilities

• Assist/support Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements;
• Understand the contract and scope of work for topsides with sub-contractor;
• Prepares key project documentation as per project specification requirements;
• Manages project topsides related drawings and controls technical documentation across disciplines;
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget;
• Assist topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assist topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Support topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Review & comment the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables;
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull;
• Co-ordinate between discipline to utilize the shared license based-on work priority;
• Monitor & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer;
• Record & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager;
• Expedite the information required by each discipline prior to start & complete the topsides design works;
• Monitor 3D model clashing issues with other discipline;
• Prepare Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM;
• Lead topsides design review activities either internally with other discipline or externally with other parties (include client);
• Initiate, organize, participate, record & file the minutes of meeting with external parties (include client) for topsides design related activities;
• Prepare, update & monitor the topsides design Punch List & Hold List on weekly basis, especially related to external parties (include client);
• Support Project Planner in preparation of monthly or weekly report to client related to topsides design progress & status;
• Support Topsides Engineering Manager/Engineering Project Manager & commercial team for VO related to topsides design;
• Responsible for ensuring that all topsides design activities meet work scope & comply with Project Quality Plan.
• Liaises with Construction & Commissioning Team to ensure topsides design activities are in-line with Area or System Completion Priority.
• Understand and monitor all interfaces with Class Society (if topside is classed) / other regulatory bodies and Clients to ensure requirements are properly addressed and relevant documents are reviewed timely.
• Assist topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering;
• Minzmum 10 years working experience in offshore oil and gas project managing topsides design works;
• Able to liaise with internal and external parties;
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design;
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Maintaining knowledge and ensuring compliance wit departmental policies and standard service procedures.

Supervising efficient upkeep of tools through proper usage of equipment and devices.

Analyzing all guest requirements and preparing plans to resolve customer care related issues and satisfy guests.

Monitoring employee morale and conducting annual appraisals.

Overseeing collection and submissions of payroll related items and leave forms to the Human Resources.

Supervising efficient upkeep of tools through proper usage of equipment and devices.

Overall Objectives

Responsible for the smooth day-to-day operations of the production department

Core Responsibilities

1. Ensure work order schedule is strictly adhered to for smooth operations
2. Technical training of new technicians, and the upskilling of existing technicians
3. Hosting daily toolbox meetings
4. Operation of machine (if necessary)
5. Oversee general upkeep, cleanliness, safety and maintenance of production workshop and equipment
6. Liaison between shopfloor and office, and with external vendors relating to equipment maintenance and repair
7. Administrative duties such as approval of completed production work order documents and programs, and recording of details of both in-house and external maintenance work

Key Deliverables

1. Continuous development and improvement of the production department by developing operator skills and manufacturing processes
2. Increasing efficiency in the daily operations of the production department

JOB DESCRIPTION

1. General

Planner is responsible for Sales order acknowledgement, issue Purchase Order, schedule production plan according to demand and invoice for shipment. Develop production plan according to available capacity and scheduling of work orders per customers requirement (Assemble to order). Analyzes supply and demand at the family and master schedule level to determine out of balance conditions and recommended alternatives to superior. . Experience in warehousing management and operations is necessary

2. Resposiblilities

· Responsible for creating and maintaining master schedule for material and capacity planning balancing the supply and demand for a product family.

· Create Purchase Order and acknowledge Sales Order from Supply Units.

· Coordinate with Suppliers, Supply Unit, production and logistics to ensure delivery schedule are met.

· Expedite material from Suppliers and follow up with them on discrepancies claim.

· Review Order Point, Safety Stock and Demand and maintain components at optimize level to minimize slow, non-movers obsolescence.

· Participate in key performance indicator on Safety, Quality, Delivery and Cost.

· Support ISO 9001 quality and ISO 14001 environment management system

· Drive warehouse improvements with data base analysis and best practice recommendations.

JOB SPECIFICATION

Requirement

• Diploma/Degree in Purchase and Material Management or Business Administration
• At least 2-3 years of Materials Management/Supply Chain experience
• Experience in SAP/MRP application advantageous
• Proficient in Microsoft Excel / PowerPoint / Word /Access.
• Hands on person and used to work in a smaller organization
• Good communication skills and relationship with all level of staff , with positive attitude
• Additional experience in 3PL logistic and purchasing /vendor management preferred

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Engineer/ Senior Engineer to be part of our Photo Process department diverse team of talent. You will be responsible to sustain and improve all metrology tools and recipe indices to meet operations goals

What you will be working on:

• Optimize process capability to meet operation needs
• Perform Shift duties to support production
• Implement projects to upkeep process capabilities and reliabilities
• Troubleshoot process issues, establish Best known methods for future reference.
• Monitor and control process performance indices such as Cpk
• Work as a team with both equipment and manufacturing Engineers to meet module objectives
• Start-up new equipment processes which involves process characterization and development
• Establish and maintain a good audit system for both internal and QA audit on process documentation.
• Troubleshoot out-of-control situations and decide on the lot disposition in an out-of-spec situation.

More About You:

• Bachelor Degree in Engineering, Science or equivalent
• 1-3 years experience in semiconductor manufacturing environment. Fresh graduates with keen interest to develop a career in semiconductor manufacturing environment are welcome to apply.
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes.
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Posses logical thinking skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Descriptions

• Provide operational support to the Section Leader in Mixing Section/ Oven & Stacking Section / Slicing Section
• Operate the mixing/ depanner & oven unloader/ slicer
• Ensure proper cleaning is done
• Adhere the disposition of all non-conforming products as instructed by superiors
• Adhere to all working and safety regulations

Requirements

• 1 year contract
• Primary education applicants are welcome to apply
• 6 days work week
• Fixed Shift (9am to 9pm / 9pm to 9am)
• Able to work overtime as and when required
• Able to work on weekends and public holidays

Job Highlights

* Provide Uniforms
* Free Meals Provided
* Free Bread Daily
* 13th Month Bonus

* Variable Bonus

* Annual Increment of basic salary (based on individual's work performance)
* Medical & Dental Benefit
* Insurance Coverage

$11.50/HR + LEAVES + MEDICAL+BONUS

• Provide day to day production operational duties.
• Processing of finished products.
• Picking and packing of products.
• MUST BE OK to handle poultry meat.
• 10 to 15 DEG work environment.
• ABLE TO Commit.

• Operate machinery safely and effectively for production processing and handling of raw materials to meet production schedule.
• Operate forklift to transfer the production equipment between warehouse and working area.
• Ensure work done meet quantity, quality and environment & safety standards.
• Follow safety procedures and company policies for equipment operations.
• Work under the guidance of Supervisor to perfom and complete the assigned duties in timely manner.
• Maintain the work area clean, safe and organized
• Any other duties as assigned by Supervisor

Requirement:

• Min Secondary Education of O Level
• Minimum 1 year experience in Manufacturing Industry with continuous plant operations
• Forklift license
• Physically Fit
• Willing to commit 12 hours alternante shift ( Alternate week of day and night)

Salary :

Salary stated is a basic salary. Min clocking of 40hours/week.

Miscellaneous Allowances ( Transport, Shift, Safety, Laundry)

Responsibilities

• Ensure workshop in operation to produce quality products and on-time delivery.
• Lead by example to manage and supervise workshop production team.
• Communicate to align with various departments.
• Experience in set up and operating Manual and Machine tools related to Precision Engineering.
• Experience in CADCAM.
• Production planning
• Ensure safety standards on the production floor.
• Lead workshop maintenance, troubleshooting and corrective actions.
• Any other ad-hoc duties as assigned.

Qualification

• Minimum NITEC/Diploma qualifications in Engineering.
• Prefer 10 years of working experience in shop floor production related to Precision Engineering.
• At least 3 years of supervisory/ management experience.
• Strong attention to detail and quality.
• Good interpersonal and communication skills to diverse work force.

Responsibilities:

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control

· Develop & review electrical related drawings, e.g. Single Line Diagram, MCC Schematic, Equipment layout, Cable ladder/tray routing layout

· Knowledge in Onshore/ Offshore standards (IEC, NEMA, IEEE & API)

· Prepare Electrical Load Analysis & List

· Familiar with Short-Circuit and Voltage Drop calculation

· Prepare & review Electrical MTO for projects

· Review Electrical equipment’s datasheet

· Strong knowledge in Low voltage MCC/Switchgear, UPS, VSD/VFD & Transformers

· Prepare specification for LV Switchgear, MCC, Transformers & VSD/VFD’s

• Reviewing of customers' specifications and drawings
• Define specifications and scope of work to contractors
• Execution of projects.
• Startup, testing, commissioning and troubleshooting of plants.
• Develop engineering capabilities and work with sales team on project proposal and bidding

Requirements:

• Degree in Electrical Engineering or equivalent recognized by Professional Engineers Board (PEB) Singapore
• Able to read & understand line diagram and generate Bill of Materials from single line diagram
• Knowledge on control, schematics, motor controls and materials take-off
• Proficient in AutoCAD, Microsoft Office
• Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage
• Able to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / vision
• Able to communicate effectively in English at all levels, both verbally and in written reports

An attractive remuneration package, benefits and challenging working environment and excellent career growth in the company would be offered to the successful candidate. We regret only shortlisted candidate will be notified.

• MNC Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8am to 4.30pm

Job Responsibilities:

• Lead daily operation as an HSE Production Engineer to ensure Safety in both daily operation and construction projects at site
• Lead HSE aspect of operation in risk assessment, Hazop study for new modification projects, changes to operating procedures, site construction activities
• Review and make list of high-risk activities in the process operation based on Hazop study, have regular meeting with production manager and make plan to improve safety level in such areas of operation
• Coordinate closely with day production & logistics members for HSE aspect of process operation and ensure safe work procedures are followed
• Study and review all the safety observation feedback and prioritize based on level of risk to follow up through MOC process. Ensure improvement items are followed by keeping records and timeline
• Work together with project engineers, production members and maintenance coordinator to ensure safety related projects are followed and implemented in a timely manner
• Review the emergency and disaster prevention procedures to ensure procedures stay relevant to current operation and up to date
• Lead and enhance any other HSE related improvement projects/activities
• To perform any other duties or assignments as assigned by superiors

Requirements:

• Diploma / Degree in Engineering, health, safety, or environmental field of study
• Working experience in the chemical industry
• Deep knowledge of Safety legislation and regulations in the chemical industry

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• 5+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

Job Title: Contract Execution Engineer

Job Description:
We are looking for a dynamic and results-driven Contract Execution Engineer to oversee the execution of contracts, negotiate vendor agreements aligned with the scope of work, and lead a team to ensure the timely and successful completion of projects. This role demands a professional with strong leadership skills, excellent negotiation abilities, and a focus on delivering quality outcomes.

Key Responsibilities:

1. Contract Execution:Execute contracts in accordance with agreed terms, conditions, and the defined scope of work.
   Monitor adherence to contractual obligations, ensuring compliance with company policies and industry regulations.
   Collaborate with internal teams to align project deliverables with contract requirements.
   Proactively address and resolve any issues or disputes that arise during the execution phase.
   
2. Vendor Negotiation:Negotiate terms with vendors and suppliers to finalize contracts that align with the project scope, budget, and timeline.
   Evaluate vendor proposals for technical, financial, and operational suitability.
   Build and maintain strong relationships with vendors to support project goals and future collaborations.
   
3. Team Supervision and Leadership:Lead, mentor, and supervise a multidisciplinary team to achieve project objectives.
   Delegate tasks effectively and ensure team members have the necessary resources and support.
   Foster a positive work environment that encourages collaboration, innovation, and accountability.
   
4. Project Management:Ensure projects are completed on time, within budget, and to the desired quality standards.
   Develop and monitor project schedules, identifying potential delays and implementing corrective actions.
   Track project progress, prepare status reports, and present updates to management.
   
5. Leadership and Problem-Solving:Exhibit strong leadership skills, motivating and guiding the team through challenges.
   Make informed decisions to resolve issues while balancing project goals and stakeholder expectations.
   Drive continuous improvement initiatives within the team and project workflows.
   
6. Qualifications:

• minimum O level with advanced certificate in work place safety and health, safety coordinator, other construction and process related safety certificates.
• Proven experience in contract management, vendor negotiations, and team leadership.
• Excellent leadership, organizational, and decision-making skills.
• Proficiency in project management tools and contract management software.

Overview of Accenture Industry X: Accenture's Industry X brings together engineering and manufacturing services to transform how businesses operate in the digital age. By combining the power of digital technologies with deep industry expertise, we help clients across multiple industries, including Semiconductor, Automotive, Industrial, Consumer Packaged Goods(CPG) and EV and Battery Manufacturing sectors, drive innovation, enhance efficiency, and achieve greater operational performance. Industry X services span across smart connected products, industrial equipment, digital manufacturing, and intelligent asset management, enabling our clients to leverage data and advanced technologies to create value and achieve competitive advantage.

Position Overview: Accenture's Industry X is seeking a dynamic and experienced leader with deep domain expertise in manufacturing and extensive shopfloor experience. The ideal candidate will have a strong background in consulting, system integration, and consultative selling, combined with hands-on experience in manufacturing environments. This role demands a professional who can drive strategic initiatives, deliver transformative solutions, foster robust client relationships, and build a high-performing consulting practice. The primary industry focus will be on Semiconductor, Automotive, Industrial and Battery industries. The position is based in Singapore, and a proven track record in South East Asia is crucial.

Key Responsibilities:

Consulting and Advisory:

• Provide expert advice and strategic guidance to clients in the Semiconductor, Automotive, CPG, Industrials, and Battery sectors.
• Develop and implement comprehensive consulting strategies to address client challenges specific to manufacturing operations.
• Conduct thorough assessments of manufacturing processes and provide actionable recommendations to optimize client operations.

Domain Expertise:

• Leverage deep manufacturing domain expertise, including shopfloor operations, to deliver innovative and effective solutions.
• Stay abreast of industry trends, emerging technologies, and best practices in manufacturing.
• Serve as a subject matter expert and thought leader at least 2- 3 of the following industries : Semiconductor, Automotive, CPG, Industrials, and Battery sectors.

System Integration:

• Lead and manage system integration projects, ensuring seamless implementation and integration of manufacturing technologies.
• Collaborate with cross-functional teams to design, develop, and deploy integrated solutions for manufacturing clients.
• Ensure projects are delivered on time, within scope, and within budget.

Consultative Selling:

• Identify and pursue new business opportunities through consultative selling techniques.
• Build and maintain strong client relationships, understanding their manufacturing needs and providing tailored solutions.
• Develop and deliver compelling proposals and presentations to prospective clients.

Practice Building:

• Build and scale a high-performing consulting practice within Industry X.
• Recruit, mentor, and develop a team of consultants with strong manufacturing backgrounds to deliver exceptional client value.
• Define and implement best practices, methodologies, and frameworks to ensure consistency and quality across engagements.

Project Management:

• Oversee project lifecycle from initiation to completion, ensuring successful delivery of client engagements.
• Manage project risks, issues, and changes to ensure project success.
• Monitor project performance and provide regular updates to stakeholders.

Data and Integration Skills:

• Develop and implement data integration strategies to support seamless information flow across manufacturing systems.
• Leverage data analytics to provide insights and drive decision-making processes.
• Ensure data integrity, security, and compliance with industry standards.
• Collaborate with IT teams to integrate various data sources and systems, ensuring a cohesive digital ecosystem.

Smart Manufacturing and Advanced Technologies:

• Drive the adoption and implementation of smart manufacturing solutions, including IoT/IIoT, AI for manufacturing, and Industry 4.0 technologies.
• Implement Digital Twin technologies to create virtual replicas of physical manufacturing processes and optimize performance.
• Utilize AI and machine learning to enhance manufacturing efficiency, predictive maintenance, and quality control.
• Stay current with advancements in smart manufacturing technologies and apply them to improve client operations.

Technical Stack Experience:

• Demonstrated experience with SAP Digital Manufacturing, Siemens OpCenter, AVEVA, and SAP Production Planning.
• Knowledge of manufacturing execution systems (MES), enterprise resource planning (ERP) systems, and other key industrial software platforms.
• Familiarity with integration and deployment of these systems in manufacturing environments.
• Strong technical skills in data management, system integration, and automation technologies.

Standards and Protocols:

• Deep understanding and experience with ISA 95, RAMI 4.0, UNS (Unified Namespace), and IT-OT Integration.
• Expertise in integrating and managing PLC (Programmable Logic Controllers), SCADA (Supervisory Control and Data Acquisition), and Historian systems.
• Ability to implement and leverage these standards and protocols to ensure seamless and efficient manufacturing operations.

Intersection of Supply Chain, Manufacturing, and Engineering:

• Knowledge of the interplay between supply chain management, manufacturing processes, and engineering principles.
• Ability to optimize supply chain operations in conjunction with manufacturing and engineering requirements.
• Experience in aligning supply chain strategies with manufacturing capabilities and engineering design processes.

Industrial Automation, Instrumentation, and Control:

• Extensive experience with industrial automation, instrumentation, and control systems.
• Proficiency in designing and implementing automated manufacturing systems to improve efficiency and reduce operational costs.
• Strong knowledge of control system architecture and the integration of various control systems within manufacturing operations.

Greenfield and Brownfield Factories:

• Proven experience in managing greenfield and brownfield factory projects from design to commissioning and sustenance.
• Expertise in planning, designing, and executing new factory setups (greenfield) and upgrading existing facilities (brownfield).
• Ability to ensure project sustainability and continuous improvement post-commissioning.

Duties and Responsibilities:

• Identify business needs, develop value propositions, and contribute to the generation of compelling proposals.
• Lead discovery sessions with customers to qualify opportunities.
• Develop and articulate trends, implications, possibilities, and solutions; build compelling presentations to align with customer needs; deliver presentations to executive and mid-manager levels.
• Own and manage the discovery phase with clients.
• Leverage Challenger methodology to understand and challenge customer status quo.
• Clearly articulate "why Accenture?" in non-technical and technical terms as required.
• Manage and execute tactics using account-based research, social media, executive outreach, etc.
• Collaborate with Industry Portfolio Directors and Country Managers/Sales Leaders to drive key business metrics.
• Understand campaign/initiative value propositions and presentation materials.
• Drive campaign execution with Industry, Marketing, and Sales teams.
• Deliver sales enablement training on collateral as required.
• Coordinate with PreSales to deliver effective, value-focused demonstrations.
• Manage execution plans and report weekly progress.
• Support the closing process if required.
• Build a strategy and roadmap interacting with Senior Manufacturing Executives, including C-Suite, and execute selling experience across the Smart Manufacturing Digital Thread.
• Understand product development and manufacturing challenges in the Semiconductor, Automotive, and EV and Battery sectors.
• Sell and deliver complex projects with a high degree of technical and functional knowledge.

Minimum Requirements:

• Must have 15 to 20 years of Industry experience with a strong grasp of manufacturing industry and technology/solutions.
• At least 5 years of consulting or system integration experience.
• Proven track record in South East Asia is crucial.
• Proven experience in carrying an individual quota and achieving targets.
• Hands-on experience in shopfloor manufacturing operations and a strong understanding of end-to-end manufacturing processes.
• Ability to articulate end-to-end digitalization messages to customers and map Accenture technology to customer requirements and vision.
• Demonstrated capability to be a trusted advisor for clients within new or existing customers at various organizational levels.
• Practical experience with Manufacturing Planning, MES, Quality, Scheduling, Plant and Process Simulation, and Manufacturing Intelligence software in the Semiconductor, Automotive, and EV and Battery sectors.
• Experience working with clients in IoT/IIoT and Industry 4.0-based solutions.
• Experience with cloud-based technologies and deployment on-premise and in the cloud.
• Proven written and presentation development skills, with strong skills in MS Excel, PowerPoint, and Tableau.
• Strong data and integration skills, with the ability to develop and implement data integration strategies.
• Proven experience with smart manufacturing, Digital Twin technologies, and AI for manufacturing applications.
• Demonstrated experience with SAP Digital Manufacturing, Siemens OpCenter, AVEVA, and SAP Production Planning.
• Deep understanding and experience with ISA 95, RAMI 4.0, UNS, IT-OT Integration, PLC, SCADA, and Historian systems.
• Knowledge of the intersection of supply chain, manufacturing, and engineering.
• Extensive experience with industrial automation, instrumentation, and control systems.
• Proven experience in managing greenfield and brownfield factory projects from design to commissioning and sustenance.
• Ability to multi-task and align with mid/upper-level management and technical users.
• Approximately 50% travel.
• BA/BS degree required.

Preferred Qualifications:

• Multi-solution and multi-industry experience.
• MBA preferred.
• Six Sigma Black Belt and LEAN manufacturing expertise.
• Lead or actively involved in digital transformation and large systems implementation (e.g., PLM, MES).

Job Description

• Industry/ Organization Type: Chemical Distributor
• Position Title: Production Admin Coordinator
• Working Location: West (Nearest MRT: Joo Koon) – Walking distance to the company
• Working Hours: 5 days (Monday to Friday: 8 am-5.30 pm)
• Salary Package: Up to SGD 2200 + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain production records, including material stock records.
• Coordinate and confirm goods receiving and outgoing documents with the warehouse and QC departments.
• Assist QC by printing and filing Certificates of Analysis (COA) and Globally Harmonized System (GHS) Safety Data Sheets (SDS).
• Coordinate delivery orders from customer service officers, collect delivery orders from drivers, and organize them.
• Collect delivery tickets from drivers and file them accordingly.
• Prepare regular inventory lists of goods using the SAP system.
• Oversee goods receiving and update records in the SAP system.
• Create manufacturing orders and batch reports for specific customers.
• Print product labels and manage all product label templates.

APPLY NOW!!!

• Min. O level
• Min. 1 year of working experience in the related field
• Able to start work on short notice

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68723 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Production Assistant/ Production Coordinator
• Working Location: North (a few bus stops away from Canberra MRT)
• Working Hours: Monday to Friday, 8.30am to 5.30pm
• Salary Package: Basic + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Request raw materials daily from the warehouse and suppliers according to the required schedule
• Monitor daily consumption of raw materials and warehouse inventory
• Coordinate with Purchasing and Suppliers on order placements and delivery schedules
• Oversee daily inventory on the Production Floor (PF)
• Manage and control a portion of label bags
• Prepare month-end stock report for the production floor
• Perform other duties as assigned

APPLY NOW!!!

• At least GCE “O” Level or its equivalent.
• Minimum 1 year of related working experience in manufacturing environment would be a plus.
• Training provided to inexperienced candidates.
• Computer literate, especially MS Office (Excel)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70650 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Avensys is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail, and supply chain.

We are currently looking to hire L2 Production Support. This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance.

JOB RESPONSIBILITIES:

Junior L2 Production Support (Java-base)

· Recent experience in working with Java J2EE applications

· Experience in application support role for min 1 years for support. Or Developers willing to learn with good knowledge of Java, Unix, SQL

· Experience in programming languages such as JAVA/J2EE.

· Experience in Unix commands , SQL queries

· Knowledge of web applications, batch jobs, JBOSS, MariaDB, SQL, Shell

· Knowledge of Job scheduling, MQ setup , C:D setup experience is a plus

· Exposure to banking industry is a plus

· Dynamic individual with thirst to learn

· Strong team player with excellent inter-personal skills

· Ownership oriented and ability to meet SLAs with no compromise on the quality of the work

REQUIREMENTS

· Bachelor’s Degree, or equivalent experience, and proven & demonstrable skills and experience.

· Fresh graduates from local Universities and Polytechnics from 0 to 1 year are welcome

· Must be graduate from IT or Computer Science

· Must have IT background

· Need to have eagerness to learn and perform with commitment

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression.

To submit your application, please apply online or submit your CV to [email protected]. Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS

Consultant Name: Preethi Kanthappan

Avensys Consulting Pte Ltd

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and Avensys' privacy policy.

Intern, Video Creative Production

Job Description

We are seeking a motivated and creative intern to join our team. This role offers a unique opportunity to gain hands-on experience in a fast-paced, creative environment. Our company is a fast-growing international company specializing in the distribution of electronics products. We are currently producing TV commercials and digital ads for our products.

As a Creative Intern, you will assist in various projects, contributing to the development and execution of creative concepts.

Key Responsibilities:

• Assist in the creation and development of content for various platforms, including social media, websites, and marketing materials.
• Support the design team in brainstorming and conceptualizing creative ideas for client projects.
• Participate in photoshoots and video productions, providing support with setup, styling, and post-production tasks.
• Conduct research and gather inspiration to inform creative strategies and design concepts.
• Assist in the production of digital assets, including editing photos, videos, and graphics.
• Collaborate with team members to ensure consistency and quality across all creative outputs.
• Help manage and organize creative assets and project files.

Qualifications:

• Currently pursuing or recently completed a degree in Graphic Design, Visual Communications, Marketing, or a related field.
• Proficiency in Adobe Creative Suite (Photoshop, Illustrator, InDesign, Premiere Pro).
• Basic understanding of photography and videography principles.
• Strong attention to detail and a keen eye for aesthetics and visual composition.
• Excellent communication and teamwork skills.
• Ability to manage multiple tasks and meet deadlines in a fast-paced environment.
• Enthusiastic, proactive, and eager to learn.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Production Operator / Fabricator
• Working Location: Woodlands
• Working Hours: 5.5 days (Mon - Fri, 8.45 am - 6.45 pm, Sat, 8.45 am - 2.15 pm)
• Salary Package: Basic salary up to $2,200 + Allowance + OT + AWS + Variable bonus
• Duration: Permanent Role

Key Responsibilities

• Cut large stone slabs to specific sizes using bridge-cutting machines.
• Operate profiling and polishing machines to shape and finish stone surfaces.
• Cut and polish sink holes according to templates.
• Use portable power tools to grind and polish stone edges.
• Mix and color match resin glue to blend with various stones.
• Apply sealant on natural stones like Granite after fabrication.
• Inspect the finished work to ensure quality.
• Clean equipment and the work area after completing tasks.
• Collaborate with co-workers, team leaders, and the Production Supervisor to meet production and quality standards.

APPLY NOW!!!

• Able to work independently with minimal supervision.
• Experience with CNC machines is an advantage.
• Able to read and follow drawings and diagrams is advantageous
• Able to commit OT when needed
• Physically fit and able to handle heavy products
• Candidates without experience are welcome to apply, training will be provided

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69317 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Container Supplier
• Position Title: Production Operator
• Working Location: West – Gul Circle
• Working Hours: 5.5 days (Mon to Fri 8 am - 5 pm, Sat: 8 am-12 pm)
• Salary Package: Basic SGD1200 + Housing allowance SGD 200 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Operating of Machinery
• Removal of residue, label sticker on the product manually
• Use a machine to wash products internally and externally
• Silkscreen marking on the product manually

APPLY NOW!!!

• Min. 1 year of working experience in a related field
• Training is provided to an inexperienced candidate

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68325 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694