Job Description:

• Support mechanical design, dynamic modeling, and structural simulations of mechanical systems.
• Contribute to software development for motion controllers using ROS/ROS2.
• Support development of front-end and/or back-end software for UI interfaces using the React framework.
• Participate in project implementation trials related to mobile robot fleet management.
• Support engagement in technical project planning and execution for development projects with industry partners.
• Prepare technical write-ups and presentations of project work.

Requirements:

• Strong knowledge of mechanical systems, particularly in the automotive domain.
• Proficiency in dynamic modeling and structural simulations.
• Experienced with ROS/ROS2 for motion controller development.
• Exposed to front-end and/or back-end software development, particularly using React.
• Understanding the use-cases of mobile robot fleet management.
• Exposed to NoSQL/SQL database management.
• Adequate technical project planning and execution skills.
• Able to perform basic technical writing and presentation abilities.

Minimum Qualifications/Specialization:

• Diploma in mechanical engineering, Mechatronics, Robotics, Computer Science, or a related field.
• At least 3 years of experience
• Specialization in mechanical systems design and simulation, particularly within the automotive domain.
• Relevant coursework or experience in robotics, control systems, software development (with a focus on ROS/ROS2), and UI/UX design.
• Experience or training in software engineering best practices.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description

• To ensure that the contractor co-ordinates the works of various contractors.
• To agree to detailed programmes of work-time chart and representation of site plans.
• To check that all necessary drawings and instruction have been given to contractors and authorization obtained, in accordance with the agreed programme
• To check that materials are ordered in good time and permits obtained.
• To check that all construction works are carried out in a safe manner, and that the site is kept secure.
• To watch for faulty workmanship and materials incorporated in the works and to issue instructions for rectification.
• To check and line and level of layout of structure during erection and that intentions of "contract" drawings are adhered to.
• To check structural slab, beam and column sizes and reinforcements placed and that intent of designs are followed.

Requirements:-

• Recognised Degree in Civil/Structural Engineering with valid RE Accreditation Certificate from IES.
• Must have at least 5 yrs of post graduate experience respectively in supervising building projects. Applicants with both design and supervision experience as R.E. will be favourably considered.
• Fully conversant with Building Contract Act and Regulations. Able to administer contracts professionally, maintain site records and contract documents systematically, to meet reporting requirements under Building Control Act.
• Extensive experience in the supervision of bored pile systems, precast concrete, and structural steel construction.
• Experience with canal/ drainage construction will be favourably considered.
• Completed one HDB project as resident engineer.

Contract duration: 28 months

Location: Tampines St 92

Project: HDB BTO

Able to start work by Feb 2025

Job Description:

• Collaborate with other developers and engineers to design, build, and maintain applications.
• Develop end-to-end specifications for solution components.
• Perform testing and implementation of the solution.
• Troubleshoot software issues and participate in impact analysis of encountered issues.
• Generate relevant documentations, reports etc.
• Contribute to continuous improvement of software development best practices.
• Keeping up-to-date with industry trends and technology developments.

Requirements:

• Degree in Computing/ Computer Science/ Computer Engineering/ Info Systems / EEE or equivalent
• Entry level candidates with good learning attitude and relevant experience can be considered.
• Familiar to full-stack development and understand concepts of software engineering.
• Knowledge of Agile Development methodology.
• Knowledge of basic coding languages such as C++, Javascript, HTML5 and Java
• Basic programming experience.
• Knowledge of databases (SQL / NoSQL).
• Comfortable using AngularJS, NodeJS, ReactJS and other common frameworks to develop software for various platform.
• Ability to learn new software and technologies quickly.
• Ability to follow instructions and work in a team environment.
• Good team player with critical thinking, analytical and creative problem-solving skills.
• Detail-oriented.
• Candidates with more professional/complexity of experience can be considered for the senior role

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

Job Description: We are seeking a skilled and motivated Network & Security Engineer to join our dynamic team. As a Network & Security Engineer, you will play a critical role in designing, implementing, and maintaining robust network & security infrastructures for our diverse range of clients. You will work collaboratively with other IT professionals to integrate various technologies, ensuring the stability, integrity, and efficient operation of our clients' network & security infrastructure.

Key Responsibilities:

• Design and deploy functional networks (LAN, WAN, WLAN, VLAN) & security (FW, NAC) solutions tailored to client needs
• Configure and install routers, switches, wireless controllers, firewalls and other network devices
• Monitor network performance and integrity, ensuring high availability and reliability
• Troubleshoot and resolve network issues escalated by support teams
• Communicate with clients to understand their requirements and provide technical support
• Maintain comprehensive technical documentation
• Propose and implement improvements to network performance, security, capacity, and scalability
• Participate in project deployments, ensuring seamless integration and implementation of network & security solutions

Requirements:

• 3 to 5 years of experience in the networking field, preferably with a systems integrator
• Hands-on experience with wired and wireless networking deployment
• Aruba Wired or Wireless certification is a must
• Well-versed with the different types of network routing and switching technology.
• Knowledge of wireless technology and products.
• Proven experience as a Network Engineer or in a similar role
• In-depth knowledge of best practices in network management, control, security, and monitoring
• Good experience with firewalls, VPNs, remote implementations, and troubleshooting
• The ability to set up and configure server hardware will be an added advantage
• Excellent organizational, prioritization, and multitasking skills

Contract Type: 12 Months (Renewal)
Salary: SGD4,000 to SGD5,000
Location: MacPherson
Working Hours: Mon – Fri 9 am to 6 pm (onsite)
Commencement: Immediate

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

MORE INFORMATION:

• Company: Well-reputable Government-Linked IT Organization; located in CBD (Orchard Zone) Area
• Working Hours: Monday – Friday (8 AM – 5.30 PM)
• [Required to provide stand-by support (i.e.: after office hours, and on weekends and PH), usually on rotating basis]
• Benefits (on top of basic monthly salary): Location Allowance (up to S$ 120/month)

+ Variable Annual Performance Bonus

+ Other Attractive Employee Benefits (i.e.: 14 Days of Annual Leaves, Medical & Insurance Benefits, etc.)

RESPONSIBILITIES:

• Managing IT Infrastructure including virtual machines, clusters and storages (i.e.: VMware, Hyper-V, etc.)
• Responding to and investigating the escalations, incidents, and service requests (according to SLA) and gathering of logs and detailed information (in cases requiring to escalate to L3 or higher)
• Deploying, monitoring, configuring, troubleshooting, managing, and technical documentation of IT Network Infrastructure, COTS Infrastructure (Commercial off-the-shelf), SCOL (System Centre Operations Manager), and SCCM (System Centre Configuration Manager) for seamless software deployments and updates
• Managing and maintaining Microsoft Active Directory services [i.e.: GPO (Group Policies), User Accounts, Domain Controllers, etc.]
• Documenting and providing those operational documentations (i.e.: SOPs, guidance, training and technical related) to internal & external stakeholders, on routine basis
• Overseeing the management & maintenance of NetApp storage systems (i.e.: provisioning, data backup, and disaster recovery processes)
• Other relevant duties as assigned.

[Might be required to travel to different sites/ other offices, in case of service requirements]

REQUIREMENTS:

• Required to have Diploma (or Higher) in IT, Computer, Electronics, Communication, or relevance
• Required to have minimum 3 – 4 years of relevant working experiences as an IT Infrastructure Engineer (providing L1 – L2 support, or higher) with proficiency in SCCM, Active Directory, SCOM, VMWare, NetApp, etc.
• Excellent communication, interpersonal, time management, and stakeholder management skills
• Experienced with Scripting/ Coding languages (e.g.: Bash, PowerShell, Windows Patch, etc.)
• Knowledgeable in Networking principles, protocols and security concepts
• Advantageous to have, but not a must have:

1. Familiar with ITIL best practices and IT Service Management
2. Certifications such as VMware, NetApp, Microsoft MCSE, ITIL, etc.

To Apply, please kindly email your updated resume to [email protected]

We regret that only shortlisted candidates will be notified.

However, rest assured that all applications will be updated to our internal resume database for future opportunities.

APBA TG Human Resource Pte Ltd (14C7275) || Yadanar Su Mon (R1549384)

Responsibilities:

• Manages internal and customer projects from engagement until project closure through proper planning and timely execution by working with internal cross-functional teams and customer
• Maintains documentation of customer projects starting from Kick-off, Engineering build, Qualification and Off-load to full production
• Reviews and analyses customer’s specifications and requirements in terms of material, process and assembly specification
• Initiates team discussion/ review on customer document gaps/ discrepancies and recommend proposals to customer
• Plan and generate detailed customer project activity timeline, track progress and anticipate potential issues and resolve it with internal stakeholders
• Ensures that customer indices are monitored and reviewed by having regular meet-up and review of team performance
• Develop and grow people project management skills, adopting on dynamic changes and crisis management
• Drive for productivity improvement and cost reduction in process integration
• Work with TPM/ Sales/ customer for new design win and handle NPI engineering activities- reliability / Yield and Quality issue

Requirements:

• Degree/Diploma in Electrical/Electronics, Engineering or equivalent
• Minimum 3 years of Engineering experience in Semiconductor manufacturing industry
• Preferably with Project Management Certification
• Knowledge of how bumping, assembly material interact with package workmanship and reliability would be preferred
• Knowledge on WLCSP bumping process of 2P2M; DOE/SPC / FMEA /JMP/ APQP standard
• Bumping process knowledge on (Lithography, Sputter, Etching, Plating, Descum & Ball drop process preferred

Are you driven by the desire to see your hard work directly impact others? Join the DNDTS team, where we excel in crafting success stories through dynamic projects. Each endeavor is a unique opportunity to contribute to our proven track record of achievements.

Experience the satisfaction of seeing your efforts transform into positive changes in people's lives. In our thriving SME environment, you won't be limited to a single role. You'll have the chance to engage in cross-departmental collaboration, fostering a rich learning experience.

As our team consistently grows, so do opportunities for career advancement. We embrace the startup culture by having a casual working attire and a flat hierachy across deparments. Your journey with us goes beyond a job—it's a chance to make a lasting impact while expanding your skill set. Join DNDTS and become a key player in our success story.

Tech Stack

- Programming Languages: Python, Go, TypeScript, SQL, HTML/CSS

- Cloud Platforms: AWS, Vercel, MongoDB Atlas

- Web Frameworks: React.js, Next.js

- Other Tools: Docker, GitHub

- Good to Know: Linux, TailwindCSS, TensorFlow/PyTorch, Tableau/Power BI, NGINX

Key Responsibilities

- Maintain the existing codebase: Perform code reviews, identify and fix security vulnerabilities, optimize code, and rectify system design issues.

- Leverage machine learning: Identify trends using machine learning and gain business insights. Utilize pre-trained LLMs and other AI models to improve existing programs.

Requirements:

- Innovative mindset: Ability to come up with novel solutions to solve problems or enhance processes.

- Staying up-to-date: Keep abreast of the latest technology trends and developments in the field.

- Technical expertise: Proficient in system architecture, database design, cybersecurity, authentication mechanisms, programming best practices, cloud computing, automated testing, continuous deployment, and source control.

- Personal attributes: Self-directed learner, motivated, and always seeking opportunities to improve.

- Soft skills: Leadership, communication, delegation, planning, and teamwork.

- Education: At least a bachelor's degree in computer science or a related field.

What We Offer

- A dynamic, exciting, and supportive work environment.

- Opportunities for professional growth and learning.

- Competitive salary and benefits.

If you're a software engineer passionate about making a difference in the consumer electronics industry, apply now to join our forward-thinking startup and start your rewarding career journey.

Responsibilities

• Understand/develop technical design specification/requirements and associated document relevant to project.
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and system commissioning on site.
• Produce test document and training material.
• Conduct training to customer
• Provide technical support to sales and maintenance team

Requirement

• Possess Diploma or Bachelor's Degree in Mechatronic or Electrical & Electronic Engineering
• Ideally with 2 or more years of DCS/PLC/SCADA/Harmonas programming experience
• Ability to read electrical/P&ID schematics
• Able to work in a collaborative team environment
• Possess good interpersonal and communication skills
• Positive working attitude with pleasant personality
• Independent problem solver with a desire to learn new skills and technology
• Work under pressure to meet project deadlines in a multi-tasking environment
• Candidates with no relevant working experience are welcome to apply

We regret that only shortlisted candidate(s) will be contacted.

Find Your Dream Job With Us

WE ARE HIRING !! Apply now and make a difference.

Role: QA Build Automation Engineer

Job Requisition Number: JR43981

Job Level: More than 10 years of relevant experience (L4)

Location: Singapore

Job Objectives

Functionally reports to the Service Build Engineering Lead under Group Infrastructure Platform Services, the Build engineer will be responsible for detail design, build, post provision support and continuously optimize and automate the end-to-end build and provisioning process in accordance to the bank standard.

This role will support and collaborate with Design, planning, solution architect, application and Development teams on infra build requirements, standards and the use, optimization and troubleshooting of all features in VMware, Linux, Windows & its tools.

This role will participate in technical discussions to share ideas and provide feedback in continuing the improvement of the Service Build Engineering team in areas such as Optimization, automation, cost savings, technology adoption & operational efficiency.

Key skill

- Red Hat Enterprise Linux (RHEL) and Windows Administration

- Must Have:

o Intensive experience in supporting RHEL for JBOSS/WebSphere/WebLogic, Oracle DB is a must

o Intensive experience in supporting RHEL in DMZ is a must

- Professional understanding of networking related to RHEL and Windows

- Professional understanding of SAN Storage related to RHEL and Windows

- Good understanding of large Data Center Facilities operation

- Hands-On experience supporting various Infrastructure agents like NetBackup, BMC Patrol

- (Mid-Level) vSphere 5.x and 6.x

- Cross-team collaboration with storage, network, security and application delivery

- Technical leadership quality to handle technical challenge and sensitive situations

- Integrate the server automation process either by custom scripts or via third-party solutions(Chef)

- Candidate should have the drive and intellectual horsepower to resolve user issues and support them through telephone, email, or via chat services as applicable

- Strong communications skills

- Excellent spoken and written English communication skills

Key Responsibilities

- Level of experience: L3 6 to 9 yrs of relevant experience

- 80% - Managing and Operating Red Hat Linux, Windows VM Infrastructure

o Installation/Configuration/Hardening/Maintenance/Patching

o Maintain System Security

o Advanced Troubleshooting

o Performance Tuning

o Capacity Management

o Preventive/Proactive Support

o Incident/Change/Problem Management

o Provide system administration support and guidance for development team’s app configuration tasks

o Veritas Clustering Setup on RHEL VM would be added advantage

o Chef Automation would be added advantage

- 10% - Managing and Operating VMware vSphere IT infrastructure

- 10% - Other IT Infrastructure Related Tasks

Please forward your resume in MS word format to [email protected] and

[email protected]

Please refer your friends for any IT openings as we have various positions.

Please do not send PDF Format Resume . Send the following details

1. Notice period

2. Current Salary

3. Expected Salary

4. Visa Status in Singapore

5. Current Location

We are looking for a skilled IT Security Engineer to join our team for a 1-year contract. The successful candidate will bring strong expertise in information security and hands-on experience managing security projects from start to finish.

Responsibilities:

• Lead and execute security projects across various domains, including endpoint, network, and application security.
• Implement and manage security tools, such as Web Proxy, Endpoint Protection, Email Security, and Vulnerability Scanners.
• Assess system security through threat modeling and propose effective solutions.
• Explore and integrate emerging security technologies to strengthen the organization’s security posture.
• Collaborate with teams to ensure secure deployment and operation of cloud environments.

Requirements:

• Bachelor’s degree in Computer Science, Computer Engineering, Information Security, or a related field.
• At least 4 years of experience in IT Security, with deep expertise in one or more security domains.
• Minimum of 2 years of hands-on experience managing and delivering IT projects.
• Familiarity with security tools and frameworks.
• Security certifications (CISSP, CISM, AWS Certified Security, etc.) are highly desirable.
• Experience with cloud security is an added advantage.
• Thrives in fast-paced and demanding environments.

This role is a great opportunity to work on impactful security projects in a dynamic environment.

• Perm Opportunity
• Must have hands-on implementation experience on Azure Cloud Security, including experience with Azure Sentinel, Microsoft Defender for Cloud, and Azure Policy.
• Preferably with certifications of the following: CCSP (Certified Cloud Security Professional), Azure Security Engineer Associate, CISSP, etc.

As a Senior Security Engineer, you’ll play a key role in managing security incidents, performing threat hunting using SIEM/SOAR tools, and supporting IT audits. This role also involves overseeing vulnerability assessments, leading security projects, conducting training sessions, and ensuring IT security for vessels. You’ll engage with external parties to stay updated on cyber threats and provide expert advisory for security projects.

Job Description

Security Incident Management

• Investigate security incidents and conduct threat-hunting activities using SIEM/SOAR tools (e.g., Microsoft Sentinel).
• Maintain hands-on experience with security monitoring tools.

Audit and Governance

• Participate in internal and external IT audits, and maintain incident response plans and IT policies.
• Conduct vulnerability assessments, penetration tests, and security awareness training, including phishing campaigns.
• Design and review IT/cybersecurity architectures.
• Collaborate with external entities (e.g., CSA, MPA) on the latest cyber threats and trends.
• Support vessel IT security setup, audits, and remediation.

Project Security Oversight

• Manage and lead security-related projects and provide security advisory for all projects.
• Participate in RFP and RFQ processes.

Requirements

Education and Experience

• Bachelor’s degree in Information Security, Computer Science, or related fields, with a minimum of 3 years of relevant experience.
• Deep knowledge of IT Security, Cloud Security, and industry standards (NIST, ISO 27000, IMO).
• Advanced skills in Azure Cloud Security, including experience with Azure Security Center, Microsoft Defender for Cloud, and Azure Policy.

Technical Expertise

• Broad IT Security Management experience across areas like network, server, application, endpoint, and access security.
• Proficiency in managing network security devices (NextGen Firewalls, IDS/IPS, UTM, NAC, AV), Windows, Linux, and networking services.
• Extensive hands-on experience with Azure cloud computing, especially in security architecture and DevOps integration.

Certifications

• Preferred: CCSP (Certified Cloud Security Professional), Azure Security Engineer Associate.
• Additional certifications such as CISSP, CISM, CEH, and ideally two or more of SC-200, SC-300, AZ-500, MS-500, SC-100.

Preferred Knowledge

• Maritime cybersecurity standards, including IMO guidelines and TMSA.
• Experience in vessel IT security is a strong advantage.

Triton AI Pte Ltd
Registration Number: R1980724
EA: 21C0661

• Perform end user IT Support
• Perform troubleshooting for client platform related problems
• Support Windows OS, office software, and other Desktop Related Software & Hardware Respond promptly to incident,
• investigate & provide temporary &/or permanent resolution of incidents escalated
• Liaise with support vendors for maintenance, support or issues resolution
• Monitor the agreed service level, document & maintain the configuration of the systems Involve in client platform implementation/upgrade project
• Any ad-hoc duties assigned / required.

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Job Responsibilities:

• Novel BCD platform device development.
• TCAD device simulation and deck calibration.
• Device test key design, layout, analysis.
• Device bench testing (DC/HV/reliability) and characterization.
• Device tuning, on time delivery, pass reliability qualification.

Required Capabilities:

• Solid semiconductor device physics and analysis skill, strong knowledge on bipolar and power devices.
• Experienced in BCD device development/ characterization is preferred.
• Hands on TCAD simulation/ calibration, layout skill, power device bench test is preferred.
• Good communication and team work skill.
• Self-motived and avid learner.

Qualifications:

• Preferred Master's or Ph.D. degree in Physics or Electrical Engineering.
• Relevant working experience in BCD development is preferred.
• Minimum of 2 years of relevant experience in semiconductor industry.
• Proficient in both oral and written English.

Job Summary
The Program Engineer or Senior Engineer will support business development activities, oversee the execution and transfer of new programs to designated operational sites, and ensure programs meet both internal and external customer goals and standards. This role involves managing cross-functional teams to successfully implement new projects in the production/manufacturing unit while maintaining cost and schedule objectives.

Key Responsibilities

• Lead and direct cross-functional teams in the execution of programs.
• Ensure the successful qualification and implementation of new projects in production units.
• Track and monitor project progress to meet timelines and cost objectives.
• Actively follow up on sales leads and take the lead in business development activities.
• Serve as the primary technical contact for customers on strategic or sensitive issues.
• Prepare quotations for molding projects involving new tooling.
• Collaborate with manufacturing teams to establish workflows and production concepts that optimize efficiency and meet customer requirements.
• Identify and define engineering requirements for new projects.
• Initiate equipment procurement activities as needed, in collaboration with the Purchasing team.
• Plan and execute tooling qualification activities with supporting teams to ensure project success.
• Ensure compliance with workplace health and safety (EHS) policies and actively contribute to EHS initiatives.

Requirements

• Degree in Mechanical Engineering or a related field.
• Minimum 3 years of relevant experience preferred.
• Experience managing healthcare products is an advantage.
• Strong understanding of project management and production processes.
• Proficiency in IT tools (MS Office).
• Excellent communication, organizational, and planning skills.
• Ability to work independently, take initiative, and manage multiple tasks in a fast-paced environment.

Interested candidates please apply online or send your latest CV to [email protected]

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy

Requirement

• At least 3 year’s of relevant experience
• Skills on Windows
• Skills on Windows OS Support & Troubleshooting, Windows Active Directory knowledge is good to have

Responsibilities

• To provide system support (level 1/2) to manage, Incident Management, monitor new incidents and troubleshoot and resolve system issues. Timely follow-up and closure of incidents.
• Service Request Fulfilment, Monitoring of new service request (SR), Work on SR assigned, Setup and configure new systems.
• Monthly Patching, Patching of systems, Testing upon completion of patching
• Daily health check and submission of daily health check report, Escort vendor when request was raised.

Interested applicants, Please send your updated resume in Word format to [email protected]

Please indicate Job Code 109 on email subject

We regret that only shortlisted candidates will be notified.

IT Consultancy & Services Pte Ltd

EA No: 92C5311 | EA Reg No. R1104129

Please visit www.itcspl.com to learn more information about ITC

The Network Services Operations position is a key role within the Command Center organisation to support the ever growing Network, Wireless, Security and Unified Communications products and services provided globally.
Within the Command Center organization this position is the Subject Matter Expert for the Network Services and Unified Communications. The role of the Command Center is to be the provider of end-to-end support to our customer base worldwide, thus the high level of expertise required to ensure the Command Center is fully self sufficient.
The primary focus is to ensure timely resolution of incidents brought to Level 2/ Level 3 and apply approved changes where applicable. You’re expected to provide knowledge sharing and transfer to the rest of the team.

Roles and responsibilities:
• Provide Customers with professional, timely and effective technical expertise on Network (LAN/WAN), Wireless and Security services support.
• Support or Provision Customer LAN/WAN/Security/Wireless changes on time and help to improve the process to “do it right the first time”
• Provide LAN/WAN/Wireless service support by owning customers LAN/WAN/Wireless incident within a complex topology (manage LAN, WAN, Wireless, IP Network routing or quality issues…) and developing a methodical approach to solve the incident or problem and escalate problem to supplier or internal Expert Practices when appropriate. Capable of analysing problems and resolving recurring difficulties through root cause analysis.
• Implementing LAN/WAN/Wireless/Security change requests for customers on the managed LAN/WAN/Wireless/Security solution (Cisco Router, Cisco Switch,Wireless (Aruba/MIST), Cisco UC, Fortinet, Palo Alto, Juniper etc.).
• Maintain a comprehensive and update-to-date customer LAN/WAN/Wireless/Security topology database
• Operate customer WAN optimization and application compression environment base on product family from Juniper and RiverBed.
• Operate customer IPSec services based on product family from Cisco, Juniper, Fortinet, Palo Alto etc.
• Expert knowledge of Firewall Management (Cisco ASA, Fortinet, WMWare NSX, Palo Alto)
• Actively contribute to improve and map LAN/WAN/Security/Wireless/UC processes within ITIL framework
• Contribute to the achievement of customer satisfaction by proving best in class support
• Understand complex LAN/WAN/Wireless/VoIP integration with WAN, LAN, Wireless, Managed Firewall and Unified Communications

Qualifications:

• Diploma/Degree in Computer Science, Data Communications, Engineering (or equivalent)
• Experience in an operational role with industry Technical Certifications are required: Cisco, Fortinet, Juniper Palo Alto etc
• Good knowledge on one or more of the following areas:

o LAN/WAN/Wifi (Cisco Nexus, Juniper EX, Aruba, Huawei etc)
o Protocols (BGP, OSPF, EIGRP, MPLS, Multicast, QoS, SIP, VoIP etc)
o Security Management (Cisco, Juniper, Fortinet, Palo Alto, VMWare NSX etc)
o Unified Communication (Cisco UC Manager, Cisco Voice Gateways, Microsoft Lync, PureCloud, Call Accounting, Contact Center etc)
o Tools and Automation for LAN/WAN/Wifi/Firewall etc
o Application compression, optimization and load balancer (Riverbed, F5 BigIP, Netscaler etc)
o Virtualization (VMWare) and Cloud Operations (IaaS, DaaS, SaaS etc)
• Experience in project delivery

For more information, please visit to www.gmprecruit.com and search for Job Reference: 21519

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | Tang Lee Ling | Registration No: R1106845

Based in Singapore and working within the product team, this role will be focusing on technological implementations for the region. This role is based in Singapore but will oversee the region to ensure consistency in strategic technological rollouts through the region. Interested candidates should be genuinely interested in media technologies and passionate to drive changes in the media industry.

Role-Based Objectives

• Build and maintain enterprise systems.
• Innovate and experiment to improve systems for seamless user experiences.
• Continual learning and experimentation in product innovation.
• Build and maintain enterprise API web services.
• Create an integration layer for cross-platform and software products.
• Manage data stack.
• Continual learning and experimentation in product innovation.

Technical Requirements

• Well verse with a type-safe programming languages: e.g. Java, C#
• Knowledge in managing and setting up polyglot persistence (Structured/Unstructured) databases: e.g. MS SQL, MySQL, Firebase
• Frameworks: e.g. .NET/.NET Core, Java Web Services
• Consumption of web services for frontend development work.
• Understanding and being able to apply Design Thinking, Journey Mapping Frameworks.
• Candidates with AWS Cloud Serverless deployment experience is a plus
• Candidates with knowledge on finance account systems is a plus

Job Responsibilities

• Candidate will be assigned to an in-house product development portfolio.
• Define, design, implementation and integration of systems according to requirements
• Carrying out of innovation, development, prototyping tasks;
• Designing seamless user journey's through understanding existing business process
• Participate in Business Process Re-engineering, Automation and Workflow Optimization

Job Requirements

• Bachelor/Master’s degree in Software Engineering, Information Systems/Science, or equivalent. (Candidates without a related degree/Bachelor can submit their experiences and GitHub for references)
• Portfolio and experience with User Experience Design & Development.
• Understanding of User Interface Guidelines, Declarative UI workflow for prototyping.
• On-site job shadows with ground operational experiences for collaboration are required.
  (Note: This is not a remote position due to business nature.)

Who do we look out for

• An individual who has a well throughout Critical thinking process and problem-solving skills
• An individual who is adaptable to a fast-paced working environment and changing requirements
• An individual who has strong empathy towards colleagues and a team player
• An individual who is innovative and can think out of the box to find practical solutions
• An individual who is feels comfortable stepping into uncomfortable situations and thrive in them
• An individual with good time management skills

To Apply

#HiringAssignment

1. Create a webservice that crawls https://www.reddit.com/r/memes/ and returns top 20 voted posts for the past 24 hours. Sorted by top voted post first, descending order.

2. Stores the crawled data into a database for historical tracking and future data visualization.

3. Present and generate a report file for past 24 hrs top 20 trending memes that can be sent as a file via a Telegram Chatbot.

4. Create a presentation deck to showcase live demo and explain both frontend and backend designs.

5. Suggest 3 alternative use cases or actionable insights from the generated report.

Level Marking Scheme:

Level 1: Demonstrates ability to do data mining and converts the mining function into an API.

Level 2: Demonstrates ability to create well structured database for crawled data.

Level 3: Clear documentation, structure, design at code and service design for data visualisation.

Level 4: Able to provide explain mining methodologies and frameworks used.

Level 5: Abe to showcase actionable insights after generating the report.

Please indicate whether you used AI in completing the assignment or not. If you used AI, provide the prompts you used. If you did not use AI, describe the HI (human intelligence) thought process in steps taken to solve the assignment.

Candidates who did not complete the hiring assignment will not be considered.

Send in your completed #HiringAssignment, CV/resume & existing portfolio to [email protected]

Submit your CV/resume & existing portfolio (Quick HR)

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 3 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be advantageous.
• Ability to rationalise designs and produce economic plant layouts.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 5 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Minimum with 7 years relevant experience
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client delivers a broad array of solutions and services, featuring IBMS, Smart Facility Management, IoT and Data Analytics, ELV Systems, as well as Network Infrastructure and ICT solutions.

• Perform testing of DCS/DDC/PLC with SCADA software.
• Conduct the communication test for Devices using different protocol.
• Arrange and submit documents and report as per the requirement.
• Ensure timely completion of commissioning activities.

Requirements:

• Diploma in Electrical Engineering or equivalent
• At least 2 years of experience in Industrial/Process automation, building ACMV systems for Built Environment Projects.
• Experience in building management systems will be advantageous.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected].

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541