Our client provides solutions from industries like pharmaceuticals, medical devices, automotive, electrical, industrial, and consumer goods.

• Assemble, troubleshoot, and install stations, ensuring correct pre-alignment and machine performance with support from the Manufacturing Manager.
• Deliver technical training to customers on hardware, pneumatics, setup, and maintenance processes.
• Assist with installations at customer sites and create project documentation.
• Collaborate with Project Engineers to meet deadlines, budgets, and share technical challenges.

Requirements:

• Nitec in Mechanical/Mechatronics engineering
• At least 3 years of experience in the automation or machine building industry.
• Familiar with project documentation and preparing manufacturing documents.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Life Science Medical Devices
• Possess own transport

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

Job Description & Requirements

1. Formulate and provide directives for Production Department in meeting organization's goals and committed to Quality Management System.
2. Accountable with the assigned factory sections in terms of production, New Model Development, Customer Service and Support, Supplier and Materials Management, Logistics and Transportation.
3. Analyze section profit/loss of projects and providing cost control and cost effectiveness strategy.
4. Provide production & material planning in ensuring production efficiency and on time delivery.
5. Ensure effective control of machine up/down time and well scheduled and optimized planning in machine / work-center load.
6. Manpower balancing and deplaoyment strategy with manpower skill set.
7. Continuous improvement program to ensure productivity, cost and quality effectiveness, general housekeeping and safety.
8. Formulate, identify and conduct management / training workshop to initiate / facilitate staff in aligning organizations missions and objectives and actions plans.
9. Support other function activities within the company to achieve the overall business goals and objectives.
10. Implement process improvement.
11. Authorize the appropriate use of performance monitoring and statistical techniques.
12. Ensure and coordinate the implementation of risk assessment and risk contol of medical devices.

Requirements:

• Preferred to have Diploma / Degree in Mechanical / Precision Engineering or equivalent.
• Minimum 6 years in a Manufacturing environment (preferably in Precision Engrg / Sheet metal industry) and with at least 4 years of supervisory capacity.
• Exposure with involvement in newly factory, product / process set-up is much preferred.
• In-depth understanding of manufacturing cycle and good budgeting control.
• Strong leadership with good analytical and problem solving skill, as well as dynamic in planning and result oriented.

• Experience in application support role for min 5 years for support and good knowledge of Java, Unix/Linux, SQL
• Recent experience in working with Java J2EE applications
• Experience in Unix commands , SQL queries
• Experience in programming languages such as JAVA/J2EE.
• Knowledge of web applications, batch jobs, JBOSS, MariaDB, SQL, Shell
• Knowledge of Job scheduling, MQ setup
• Dynamic individual with thirst to learn
• Strong team player with excellent inter-personal skills & ability to meet SLAs

Ship Repair Engineer

• Location: Penjuru lane ( Transport provided at Jurong East)
• Monday to Friday: 8:00 AM – 5:00 PM
• Saturday: 8:00 AM – 12:00 PM
• Salary: $3,300 - $4,000

Job scopes:

• Manage day-to-day operations and coordination of afloat repairs, load testing & inspection services on ships in Singapore and the region.
• Assist Service Manager in handling the company’s field service operations, in technical, operational and commercial matters
• Prepare quotations, costing for invoice, tools & equipment lists and procurement of parts.
• Manage and coordinate service job execution.
• Liaise with our customers, such as Ship Managers, Offshore Operators, Shipyards, Agents and others
• Manage the tools & equipment which are kept at our warehouse. Send for recertification periodically as required.
• Coordinate with Ship Agents, Ports & Ship Yards, handle permits and schedule service attendances.
• Coordinate and arrange transport of Engineers, tools & equipment to and from job sites
• Answer customer queries and provide remote technical support.

Job Requirements:

• Diploma in Marine Engineering or similar.
• Past experience in marine cranes & deck machinery required.
• Experience in coordinating marine service work, especially afloat repairs will be an advantage.
• Able to commit overtime.

✅The Supreme HR Advisory Pte Ltd EA No: 14C7279

✅SAMUEL SIAW Reg No: R24124745

Job Description & Requirements

1. Formulate and provide directives for Production Department in meeting organization's goals and committed to Quality Management System.
2. Accountable with the assigned factory sections in terms of production, New Model Development, Customer Service and Support, Supplier and Materials Management, Logistics and Transportation.
3. Analyze section profit/loss of projects and providing cost control and cost effectiveness strategy.
4. Provide production & material planning in ensuring production efficiency and on time delivery.
5. Ensure effective control of machine up/down time and well scheduled and optimized planning in machine / work-center load.
6. Manpower balancing and deplaoyment strategy with manpower skill set.
7. Continuous improvement program to ensure productivity, cost and quality effectiveness, general housekeeping and safety.
8. Formulate, identify and conduct management / training workshop to initiate / facilitate staff in aligning organizations missions and objectives and actions plans.
9. Support other function activities within the company to achieve the overall business goals and objectives.
10. Implement process improvement.
11. Authorize the appropriate use of performance monitoring and statistical techniques.
12. Ensure and coordinate the implementation of risk assessment and risk contol of medical devices.

Requirements:

• Preferred to have Diploma / Degree in Mechanical / Precision Engineering or equivalent.
• Minimum 6 years in a Manufacturing environment (preferably in Precision Engrg / Sheet metal industry) and with at least 4 years of supervisory capacity.
• Exposure with involvement in newly factory, product / process set-up is much preferred.
• In-depth understanding of manufacturing cycle and good budgeting control.
• Strong leadership with good analytical and problem solving skill, as well as dynamic in planning and result oriented.

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences
• have relavant certificates/diploma
• hardworking and keen
• 
  
• Provide overall supervision of production activities.
• Plan, organize and lead a team of production workers to achieve production target and output, cycle time, and yield.
• Improvement in maintaining product quality and productivity. Provide a guideline to check on processes thereby assuring that work is done by the operators.
• Monitor the daily efficiency status of the line.
• Ensure good housekeeping and safety at the workplace.
• Oversee hiring and training of food production personnel
• Perform other duties as assigned.

In this role, you are required to support the daily operations of the production section you are assigned to. You will be required to maintain the production area cleanliness and comply with food hygiene management standards.

Job Description

• Prepare and process of food items (Halal).
• Prepare items according to in-house procedures.
• Follow food production and preparation specifications.
• Preparing food ingredients by measuring, mixing, stirring, chopping, slicing, dicing, peeling, or otherwise preparing them for use in meal preparation.
• Ensure proper and safe operation of machineries.
• Maintain & ensure the cleanliness of work area.
• Check and ensure that quality and quantity of items ordered are received and stored in proper condition.
• Keep track of inventory to ensure adequate food ingredients, packaging supplies and finished product.
• Perform other ad-hoc duties as requested.

Requirements:

• Physically fit
• Able to work as a team.
• No Experience may apply.

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

Primary

1. To Provide primarily support at production department.
2. Assist superiors in prepare and compile reports.
3. Prepare, generate and release job order / purchase requisition to various departments of the confirmed job orders.
4. Responsible for planning of production output, monitor machine capacity, OEE etc.
5. Work closely among inter-departments to ensure committed schedules are met.
6. Provide regular update to the sales/Projects team on project development in a timely manner.
7. Maintenance and upkeep records of Production/Engineering/Technical documents.
8. Arrange production run according to Supervisor/HOD instruction.
9. Receiving/distribution of raw material for production usage.
10. Parts distribution to other departments for next process.
11. Able to systemize and improve on workflow.
12. Good application and know-know on the ERP / reporting tools.
13. Ability to understand or interpret all technical drawing and part specification.

Education level:

1. Min. NTC/Nitec level ME/Mechatronic or its relevant.

Experience level:

1. Two (2) years in relevant experience in clerical environment or manufacturing or its relevant

2. Perform competent in clerical duties, computer literacy.

3. Result oriented, resourceful and independent.

4. Ability to read, understand mechanical drawing and Geometric Dimensioning and Tolerance.

Responsibilities

• Liase with Architects, Clients and other Consultants for the design of structural and civil Engineering works.
• Design , coordinate, manage and supervise the civil & structural project that has been assigned.
• Perform structural analysis and design including drafting in building or any structures as required by the project.
• Liase with clients & consultants to meet C & S requirements for submissions to local authorities.
• Coordinate to ensure civil and structural requirements is meet for project tender,submission and construction schedule.

Requirements

• Degree in Civil / Structural Engineering.
• 1-2 experience in Structural Design and able to work independently will be preferred.
• Entry Level Candidate without experience are welcome to apply.
• Knowledge in AutoCad & Structural Software e.g. STAAD. Pro, Orion, Esteem, MidasGen, Etabs, etc will be advantage.
• Good positive working attitude, self-motivated and responsible.
• Salary will be commensurate based on working experience.

Our esteemed client, an established MNC, is searching for a QA Assistant Engineer/Engineer:

Job Responsibilities:

• Inspect outgoing and incoming parts according to established procedures and specifications, including incoming process inspections.
• Maintain accurate quality records and manage quality-related data.
• Identify and escalate quality issues to the appropriate personnel for resolution.
• Ensure segregation of non-conforming products to prevent mixing with conforming products.
• Authorize rejection of parts that do not meet quality standards.
• Approve the release of conforming parts for storage and subsequent delivery.
• Conduct routine factory tests and inspections on completed switchboards.
• Perform testing and commissioning of switchboards on-site or on vessels, ensuring customer satisfaction, and address warranty claims or quality concerns.
• Conduct official tests on switchboards with surveyors, consultants, or customers as required.
• Support the manager in fulfilling quality responsibilities and achieving objectives.
• Maintain cleanliness and organization in the QA Department.
• Adhere to safety protocols during all tasks.
• Use calibrated instruments for inspections to ensure accuracy.
• Initiate actions to prevent product non-conformities.
• Propose and implement solutions for identified issues.
• Verify the effectiveness of implemented solutions.
• Control further processing or delivery of non-conforming products until issues are resolved.
• Undertake additional responsibilities as assigned by supervisors.
• Comply with the Quality Management System procedures for effective implementation and control.

Job Requirements:

• Diploma or Degree in Electrical Engineering.
• Prefer 2 to 3 years of QA experience in marine or industrial field.
• Experience in testing of switchboards/panels will be an advantage.
• Willing to work onboard the vessel and travel occasionally.

Additional Information:

• Salary: Up to SGD 3,500 +AWS +VB (2 Months)
• Working Location: Tuas Crescent
• Working Days: 5-day work week
• Working Hours: 8:15 am to 5:45 pm

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

[email protected]

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)

• Dedicated, committed, a good team player
• Possesses excellent planning, analytical and organization skills
• Assist in engineering design and calculation
• Clarify and resolve technical issues with customer / contractor
• Structural drawing, calculation and analysis of the tower crane
• Other ad-hoc duties as and when assigned
• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• At least 1 Year(s) of working experience in the related field is required for this position.
• Fresh graduate are welcome
• Able to work at high element environment
• Willingness to travel in a short notice
• Required Skill(s): Solidworks, Steel Structural Design and Calculation, Mechanical Design, Mechanic of material, Microsoft office

Responsibilities:

• Assist Project Manager in daily site operation.

• Prepare Daily Report and submission.

• Prepare work Inspection Checklist and submission.

• Prepare materials request and arrange for delivery.

• Prepare request for fabrication.

• Receive and verify materials delivered and record GDN and DO.

• Update drawings and drawing register, receipt and issue of drawings.

• Ensure all documented records are properly filed.

• Organize the project site and other places of work so that all operations are carried out to the required standards with the minimum of risk to men, equipment and materials.

• Plan and maintain a tidy construction site.

• Arrange the delivery and stacking of material in such a manner as to avoid increasing the risks involved by double handling.

• Implement arrangements with sub-contractors and other contractors on the project site to avoid any confusion about areas of responsibility.

• Ensure that periodic tests, inspections and maintenance work are being carried out.

• Ensure that all repair and maintenance work carried out on the project site is done in a proper manner.

• Ensure that correct procedures and system of work are being developed and maintained.

• Attend promptly to all notified plant defects or bring to the attention of the relevant Foreman the need for Dangerous plant to be put out of service.

• Manage & Comply with Workplace Safety & Health for project execution.

Requirements:

• Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent

• Minimum 4 years of site experience in construction field is preferred.

• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner.

• Communicating and handling clients at sites on system installation, breakdown and technical enquires from clients
• Troubleshooting for faculty systems
• R&D for new system configuration
• Coordination and Supervision - Coordinate, manage and monitor the work flow among interdepartment
• Plan the use of human resources. Delegate tasks and accountabilities. Establish work schedules. Supervise staff
• Monitor and evaluate performance.
• Provide training and guidance to junior staffs

As a Test Engineer, you’ll work on systems that enable millions of transactions, helping to build a smarter and more connected Singapore. Your role in ensuring high-quality systems will have a direct and positive impact on public services, making them more efficient and reliable for everyone.

What You’ll Do

1. Testing Lifecycle Management

• Oversee the end-to-end testing activities of an integrated e-payment system.
• Plan and execute testing strategies, ensuring alignment with business and system requirements.

2. Test Preparation and Execution

• Design and develop comprehensive test cases tailored to system designs.
• Prepare test environments, execute test procedures, and automate solutions using scripting or programming languages.
• Optimize system performance through rigorous testing and fine-tuning.

3. Quality Assurance and Defect Management

• Create traceability matrices to ensure all requirements are tested effectively.
• Log, track, and resolve defects to ensure quality standards are met.
• Conduct root cause analysis on defects and address gaps to enhance test efficiency.

4. Collaboration and Documentation

• Engage with internal and external stakeholders during test reviews.
• Develop detailed design documents and user manuals for test automation solutions to support end users.

What We’re Looking For

Qualifications & Experience:

• A degree in Information Technology or Engineering.
• At least 3 years of experience in testing and test automation solutions for devices (UI-based or embedded) and back-office systems.
• Familiarity with the full system development lifecycle—from requirements gathering to deployment.
• Certification in software testing is highly desirable.

Technical Skills:

• Strong capabilities in test planning, design, and execution.
• Experience in automating test solutions using scripting or programming languages.
• Familiarity with diverse testing phases, including System Integration Testing (SIT), User Acceptance Testing (UAT), and Performance Testing.
• Background in micro-payments or automatic fare collection systems using smart cards is an advantage.

Soft Skills:

• Excellent written and verbal communication skills.
• A proactive and collaborative team player with the ability to work independently.

Why Join Us?

• Meaningful Impact: Be part of a team that ensures the reliability of systems impacting millions of lives daily.
• Collaborative Environment: Work alongside skilled professionals dedicated to innovation and excellence.
• Skill Development: Advance your career with opportunities to enhance your technical and analytical expertise.
• Innovation-Driven: Contribute to cutting-edge systems in the e-payment domain, driving efficiency and accessibility for the public.

Reporting to the Head of Engineering, Chubb Life, the primary responsibility of the Principle Engineer - Data for Chubb Life is to cultivate data engineering skills and adopt new age data tools into Chubb Life to support the fast-growing business and customer needs. Concurrently, success will also be viewed in aligning Chubb Life approaches to Chubb Group’s overall target operating models. As Chubb Life operates an extensive matrix reporting structure, strong influencing skills are critical in ensuring all technology related services and deliverables are executed within business expectations.

You will form strong working partnerships with business and technology leaders, plan and implement data engineering programs, formulate data and analytics strategies for solving business problems.

You will have superb engineering, technical, business and communication skills to be able to work with functional leaders to define and prioritize key data needs and build data products & platforms.

Responsibilities

• Develop the vision for Chubb Life’s data engineering approach and drive the data engineering strategy in tandem with the data transformation program
• Accountable for the data pipelines and data platforms that support the business needs across Chubb Life businesses
• Build a data engineering organization and governance model that is business focused, proactive, and resilient
• Attract, hire, and retain top talent, creating an engineering culture that fosters innovation and collaboration
• Promote data governance and master/reference data management as a strategic discipline
• Implement strategies to monitor the effectiveness of data management
• Be an inspiring engineering leader, mentor, and coach, be an active member of the data leadership team
• Evaluate emerging data technologies and provide thought leadership to determine their business benefit and impact on the future-state data platform
• Manage and drive the relationships between Chubb Life Global and the Global Life teams across geographic locations, establishing the ongoing operating model
• Proactively engage with teams in market and global offices to design and execute on a roadmap for internal, partner, and client data solutions for the business
• Evolve the way the business thinks about the importance of data and show how a robust data strategy can drive substantial value to our customers and clients.
• Work with the Data Delivery functions to form a model that supports delivery at a strategic and tactical level to support speed to market and insights
• Work with Life Head of Data Transformation and the group Data engineering teams closely to achieve the ambitions of Life data

Core Competencies

• Customer focused, results and action oriented
• Excellent communication and interpersonal skills with the ability to actively engage staff and stakeholders, communicate vision, effectively communicate Data and Analytics concepts / solutions, and influence appropriately
• Strong time management and prioritization skills
• Well-developed delivery skills
• Change agent and appreciation of Agile principles and methodologies
• Demonstrated ability to drive business improvement and effectiveness via well designed data solutions
• Ability to proactively identify data-driven issues and opportunities, and use the appropriate level of technical acumen to drive solutions
• Ability to navigate and succeed in a large global enterprise
• Ability to set direction and participate in new initiatives when required, research, recommend and document modern technologies and processes that will provide benefits to the business
• Subject matter expert contributing to Chubb Life’s business and data strategy, ensuring the data architecture, infrastructure, methodologies, and tools employed are best practice and follow established governance processes

Additional Requirements

• At least 15+ years of experience in Software Development and/or Data Engineering Best Practices and development
• University qualification in computer science or equivalent data field qualification
• Proven experience in large multinational financial services industry, and previously held a data engineering leadership role
• In-depth experience in designing and implementing enterprise-wide cloud data and analytics platforms
• Hands-on architecture and delivery experience in large scale, cloud data management solutions
• Hands-on experience architecting and implementing large scale multi discipline master/reference data management, cloud data lake and analytics platforms
• Data technology literate with a detailed understanding of the modem data architectures and data analytics platforms
• Presentation and facilitation and design-thinking skills
• Ability to collaborate and communicate with executive level business leaders
• Insurance business domain, data/content and process understanding
• Knowledge of relational/object modelling, knowledge/graph modelling techniques
• Understanding of metamodels, taxonomies and ontologies
• Ability to assess rapidly changing technologies and apply them to business needs
• Good financial acumen and experience in planning and budgeting

INFORMATION:

As a Data Center Segment expert, the Sales Engineer is responsible for leading, developing sales strategies and plans as well as generate new business opportunities to the company.

The position does this by locating, developing, defining, negotiating, and closing business relationships with potential and existing key accounts, end customers, consultants, and system integrators.

The position maintains extensive knowledge of current market conditions, competitive positions, and solutions/services that PS can provide to develop the pipeline of business coming into the company.

This position has the ultimate objective to aggressively achieve profitable growth through monitoring of Data Center project pipelines and assisting to convert these into actual orders.

RESPONSIBILITIES

Generate new business opportunities and proposes potential business deals by contacting potential customers, decision makers and target accounts. Screens potential business deals by analyzing market strategies, deal requirements and evaluate options.

Works closely with local, regional, and global teams to close new business deals with persuasive approaches and pitches that will convince potential key accounts/customers to do business with PS. Collaborates to establish long term working relationships with key stakeholders and decision makers at different management levels across key accounts’ organizations.

Establish, cultivate, and maintain key relationships with end customers, influencers, and contractors. This can be done in conjunction with distribution partners and direct engagement.

Uncover and build opportunity pipelines with Sales, end customers and advance through the sales stages progressively till deal closure. Ensures that data is accurately entered and managed within PS’s CRM and sales/project management system.

Establish budgetary forecasts and sales volume targets for the SEA DC market.

Collaborate with Sales to assess level of involvement required from distribution to ensure success of closing business and project opportunities. Provides project guidance for price and quotation strategy to distribution network.

Identifies and support in qualification of strategic alliances to expand PS solution, products, and services; and business networking to leverage into additional markets.

Provide front line Data Center related marketing and technical support to distribution partners and dealers, as necessary.

Analyze sales and marketdata to provide relevant information to senior management for decision making.

Plays an active role in promoting PS in trade events and associations. Works with Marketing and Engineering to create, prepare and present technical papers and other application specific white papers for marketing collateral, trade journals and conferences.

Be the expert in Data Center power products and solutions, industry standards and overall on-site power system design and integration.

TRAVEL

This position requires travel up to 50%.

REQUIREMENTS

Degree in Electrical or Mechanical Engineering with at least 8 years of relevant sales experience in the power generation business.

Solid proven direct and channel sales track record. Able to present and negotiate with senior executives and decision makers both internally and externally.

Results driven, strong will to compete and win in a business environment.

A good team player and enjoys interacting with people of all levels.

Able to travel frequently and work independently.

CRITICAL TECHNICAL, PROFESSIONAL AND PERSONAL CAPABILITIES / SKILLS

Experience in Data Center segment is critical to the growth of PS business. Strong technical knowledge of power generation products and solutions. Has good knowledge of industry standards and requirements.

Strong people and communication skills that engages and motivate others. Able to stimulate new thinking and remain customer focused.

Strong drive to succeed; motivated, energized and demonstrates high level of enthusiasm.

Excellent team player. Able to lead or participate in cross-functional teams to achieve goals and objectives. Objective, open-minded and receptive to feedback.

WORKING HOURS / LOCATION

5-day work week

8.30am to 5.15pm

Located in Jurong

OTHER BENEFITS

Annual leave - 15 days up to 21 days

Medical, dental, optical and annual health screening benefits

Company transport provided at Boon Lay MRT station

Other allowances applicable

Interested applicants, please attach your resume with your current salary. expected salary, reasons for leaving and notice period upon application.

Gladwin Teo Jian Rong

EA No. 23C1599

EA Personnel no. R1768774

• Minimum of 2years of experience in desktop application administration and support.
• Strong knowledge of GL OMS trading platforms and SGX applications.
• Familiarity with workflows involving SGX, SSH, and SFTP protocols.
• Proficiency in Level 1 network troubleshooting, including kiosk PC and network switch support.
• . Monday to Friday (5-day workweek).

 Covid-19 vaccination compliance is mandatory.

JD :

· IT Support Desk Engineer plays a critical role in ensuring the smooth operation of an organization’s IT systems, hardware, software and operational devices. The role will serve as the first point of contact for end-users experiencing technical issues, offering remote or onsite support, troubleshooting hardware and software problems, and maintaining high levels of customer satisfaction.

Skills

· Proficiency in troubleshooting Windows operating systems.

· Familiarity with Active Directory, Microsoft 365 & MS office products.

· Basic understanding of networking (TCP/IP, DNS, VPN).

· Experience with ticketing systems (like ManageEngine-ServiceDesk or Similar).

· Any Windows Server knowledge will be added advantage.

Education

· Diploma or bachelor’s degree in computer science, Information Technology, or a related field.

Experience

· Minimum 3 years in an IT support or helpdesk environment preferred.

· First level support to users in Singapore Operations and Extended Operations in other regions for hardware, software, and network-related issues.

· Diagnose and resolve technical issues in a timely manner, escalating to higher levels of support when necessary.

· Install, configure, and maintain desktop computers, laptops, printers, and other peripherals.

· Assist with the setup and maintenance of user accounts, permissions, and access controls.

· Monitor, Assign and report Service Desk tickets.

· Ensure software updates and patches are deployed regularly.

· Monitor system performance and network stability, reporting issues promptly.

· Assist with backup and recovery processes to ensure data integrity.

· Collaborate with IT teams to deploy system upgrades and new technologies.

· Work with other vendors which need secondary support and ensure closure of issues.

· Document reported issues, resolutions, and follow-up actions in the ticketing system.

Additional details:

Job Type : 12 months Contract - Extendable

Location : Jurong East

EA License No: 11C4879 / Registration ID : R1218583

Apar Technologies Pte Ltd, Singapore

• Minimum of 2years of experience in desktop application administration and support.

• Strong knowledge of GL OMS trading platforms and SGX applications.

• Familiarity with workflows involving SGX, SSH, and SFTP protocols.

• Proficiency in Level 1 network troubleshooting, including kiosk PC and network switch support.

• Monday to Friday (5-day workweek).

Covid-19 vaccination compliance is mandatory.

As a Test Engineer at MSB, you will be responsible for developing frameworks for monitoring and improving Engineering performance to plan, providing value-add engineering solutions, and driving continuous improvement projects in Test processes. You will also provide support in product test proliferation and excursion management activities.

Responsibilities and Tasks

Develop frameworks for monitoring and improve Engineering performance to plan

• Maintain knowledge of engineering plans, forecasts and targets
• Develop systems for tracking and monitoring actual performance
• Evaluate and resolve performance issues
• Drive projects to improve performance to plan

Provide value-add engineering solutions to meet cycle time improvement, cost reduction and quality performance goals

• Participate in Test cycle time, cost and quality improvement teams
• Review and evaluate variables that contribute to cycle time, cost and quality
• Develop and implement cycle time, cost and quality improvement projects

Drive continuous improvement projects in Test processes to improve operational efficiency and productivity

• Maintain Test process, equipment, systems and product knowledge
• Perform Test efficiency and productivity analysis
• Develop and implement improvement projects

Provide support in product test proliferation activities

• Activate manufacturing test readiness team
• Verify production readiness
• Perform production validation
• Ensure qualification effectiveness and efficiency

Support Quality team in excursion management activities

• Participate in Test containment and disposition activities
• Perform and verify Test disposition system set ups
• Execute and ensure timely disposition of deviation materials

Work closely with Test planning/manufacturing/engineering teams to ensure the smooth execution of Test manufacturing operations

• Participate in Test operations review discussions
• Provide tactical engineering support

Collaborate with multi-functional Central/Site teams to overcome Test operation issues and challenges

• Investigate and identify root cause of issues
• Implement corrective actions
• Design preventive measures

Job Requirements

• Bachelors /Masters in Electrical and Electronic Engineering, or related fields.
• Knowledge of semiconductor processing, device physics, and Silicon IP.
• Self-motivated, enthusiastic, and proactive.
• Proficiency in statistics, data analysis tools, problem-solving and analytical skills.
• Excellent communication and presentation skills both oral and written.
• Ability to work independently, prioritize tasks, and manage numerous projects with minimal supervision.
• Effective collaboration across departments and with external partners.
• Familiarity with Big Data Analytics, Process Automation and Generative AI Applications will be an added advantage.
• Leadership experience
• Keen and knowledge of the semiconductor Industry
• Experiences in the development, procurement, installation, and calibration of instruments, equipment, and control devices for both New Product Introduction (NPI) and High Volume Manufacturing (HVM). Experiences in managing the operational, functional, and performance testing of semiconductors and conducts Root Cause Analysis for low yield issues and analyzing and interpreting test data, and prepares technical reports and publications.

We are seeking a Research Engineer to join a university-level research centre collaborating with industry. Successful candidates will be involved in a project that is related to 3D Animation.

Key Responsibilities:

• Design and implement user interfaces for interactive 3D animation tools and systems.
• Build dynamic web applications using modern front-end frameworks.
• Collaborate with back-end developers to integrate front-end solutions with server-side logic.
• Optimize web applications for maximum speed and scalability.
• Develop and maintain RESTful APIs for efficient communication between components.
• Contribute to database design, development, and optimization for project needs.
• Utilize containerization technologies like Docker for application deployment and scaling.

Job Requirements:

• Bachelor’s degree in relevant disciplines.
• Proficiency in HTML5, CSS3, and JavaScript.
• Hands-on experience with Vue.js or similar front-end frameworks.
• Familiarity with the Django back-end framework for server-side development.
• Strong knowledge of database design and optimization.
• Experience in designing and developing RESTful APIs.
• Working knowledge of containerization technologies such as Docker.
• Ability to work collaboratively within a multidisciplinary team and deliver high-quality code.

We regret that only shortlisted candidates will be notified.