Job Responsibilities

• To support the construction team for M&E engineering works.
• Check and propose to make sure the design drawing are workable for the project.
• Strong knowledge of each M&E materials and able to order each one as per requirements.
• Planning/scheduling and coordination of M&E works.
• Project coordination, supervision, and monitoring of the progress of site work.
• Coordinate M&E engineering work and work closely with other department staff to resolve site discrepancies and technical issues.
• Oversee and ensure works are carried out in accordance with the approved drawings, materials and method statements.
• Ensure quality work in order to achieve CONQUAS and/or QM requirements
• Liaise with clients, consultants, relevant authorities, and sub-contractors on M&E issues.
• Handle any other ad-hoc duties and tasks assigned.

Requirements

• Degree in Mechanical & Electrical Engineering or related fields. PE Board recognized degree is preferred.
• Minimum 2 years of relevant experience in the construction industry for senior role.
• Proficient in Autodesk Revit or BIM software.
• SC/PR only

Naval Group Far East Pte Ltd

Naval Group designs, builds, integrates, provides in-service support, dismantles, and deconstructs submarine and surface ships. As an industrial contractor, designer, and overall integrator of whole warships and combat systems, it also offers a full range of services to naval bases and shipyards. We are a prime contractor, designer, and integrator of naval systems, with over 400 years of experience in naval shipbuilding. Naval Group Far East is a wholly-owned subsidiary of Naval Group SA, headquartered in France.

Job position: R&D Engineer (VHF) Intern

VHF Communication Bot

Overview

Very High Frequency (VHF) radio communication is widely used in the maritime industry for essential ship-to-ship and ship-to-shore interactions. However, these communications often suffer from noise, language barriers, and overlapping speech, making them unclear and difficult to interpret.

The goal of this project is to develop an automated, accurate, and reliable system for transcribing and translating VHF radio communications. The system should deliver clear transcriptions and translations of each speaker’s input. If time permits, an additional feature will involve generating a situation summary based on the communication.

Due to limited availability of real-world data, this project will also involve data collection and generation, which could include sourcing open datasets or simulating relevant data using different methods.

Requirements

· Proficiency in shell scripting and Python programming

· Experience with Git for version control

· Interest or experience in Natural Language Processing (NLP)

· Familiarity with deep learning libraries such as PyTorch or TensorFlow

Responsibilities

· Collaborate with a team to prototype and explore solutions

· Contribute to the architecture design and development, tackling challenges like high reliability and scalability

· Research and implement technologies and approaches that align with project goals

Job Descriptions

• Provide operational support to the Section Leader in Mixing Section/ Oven & Stacking Section / Slicing Section
• Operate the mixing/ depanner & oven unloader/ slicer
• Ensure proper cleaning is done
• Adhere the disposition of all non-conforming products as instructed by superiors
• Adhere to all working and safety regulations

Requirements

• 1 year contract
• Primary education applicants are welcome to apply
• 6 days work week
• Fixed Shift (9am to 9pm / 9pm to 9am)
• Able to work overtime as and when required
• Able to work on weekends and public holidays

Job Highlights

* Provide Uniforms
* Free Meals Provided
* Free Bread Daily
* 13th Month Bonus

* Variable Bonus

* Annual Increment of basic salary (based on individual's work performance)
* Medical & Dental Benefit
* Insurance Coverage

$11.50/HR + LEAVES + MEDICAL+BONUS

• Provide day to day production operational duties.
• Processing of finished products.
• Picking and packing of products.
• MUST BE OK to handle poultry meat.
• 10 to 15 DEG work environment.
• ABLE TO Commit.

Our Client is in the Manufacturing Industry. Due to their current expansion plan, they are looking for an Automation Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities

• Manage and maintain site automation systems, including ABB 800xA, Control Builder, Schneider Quantum, ProWORX 32, and industrial network infrastructure.
• Administer VMware setups, server/workstation configurations, FIX32 database/graphics, MES/DCS/SCADA/PLC systems, label applicators, and ABB robotic palletizer systems.
• Implement automation and control solutions for plant modifications, capital projects, and improvement initiatives in alignment with specifications, budgets, and procedural guidelines.
• Provide expert advice and support for troubleshooting, optimizing processes, and improving systems.
• Ensure compliance with safety and operational standards, maintain inspection readiness, and participate in audit activities as required.
• Lead, mentor, and develop junior staff to enhance their skills and contribute to achieving departmental goals.
• Assist in preparing the section’s annual operating budget to meet operational and strategic objectives.
• Plan and execute maintenance schedules, manage resources during maintenance activities, and address breakdowns effectively, including engaging external expertise when needed.
• Support facility master planning to ensure compliance with engineering standards, address obsolescence, and manage asset replacements.
• Monitor and maintain automation systems to ensure seamless plant operations and minimize production disruptions.
• Address customer complaints and deviations by ensuring timely implementation of corrective engineering actions.
• Any ad-hoc duty as given

Requirements

• Min degree in the relevant engineering discipline
• Min 3 years of relevant experience in the process/food industry
• PLC experience in ABB 800xA, Scheider or Siemens
• Good understanding of local codes and requirements
• Experience in Control systems both in maintenance and plant commissioning

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

• Support and maintain company servers, workstations and related IT equipment. Including support and configuration of software and provision of assistance to corporate clients
• Attend to service calls on the go.
• Liaise with service coordinator on service call schedules
• Check network equipment runing good condition with secure amber light
• Ensure meeting all service calls punctually and complete serivce within allocated time.
• Setup and Deploy New pc
• Support cisco and polycom Video Conference

Requirements

• Min 3 year relevant working experience
• Willing to travel islandwide to support customers on ICT matters (avg 8-10 locations per day)
• Ability to diagnose, troubleshoot and resolve laptop problems
• Be conversant in English and possesses good working attitude and disposition
• Able to work independently & effectively with team
• Able to think creatively and work under pressure
• Strong time management
• Physically fit to carry computer spare parts
• Willing to perform rotating shifts (when required)

Applicants with relevant experience may be considered for senior roles.

Please send your detailed resume in MS Word format to : [email protected]

Stating your notice period / earliest available commencement date, current & expected salaries.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Key Responsibilities

• Take charge of facility MEP package concept design and RFP Preparation for 300mm semi-conductor Fabrication plant.
• Supervise and monitor EPC contractors or design consultants’ design progress.
• On-site management MEP package construction schedule and commissioning.

Education Qualification & Essential Experiences

• Bachelor's degree in Mechanical Engineering or related field.
• 300mm fab facility mechanical system operating experience, especially Exhaust / Chiller / PCW & Clean Room Systems.
• Good written and verbal communication skills in English.
• Good skills of computer software e.x. Microsoft Office, Microsoft Project, AutoCAD etc.
• Candidates with proactive attitude and responsibility good collaboration experiences in construction project.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Key Responsibilities

• Take charge of facility water treatment (UPW & WWT & Water recycling…) system package concept design and RFP Preparation for 300mm semi-conductor Fabrication plant.
• Supervise and monitor water treatment contractors or design consultants’ design progress.
• On-site management water treatment package construction schedule and commissioning.

Education Qualification & Essential Experiences

• Bachelor's degree in Civil Engineering or a related STEM field.
• 300mm fab facility water treatment system operating experience.
• Good written and verbal communication skills in English
• Good skills of computer software e.x. Microsoft Office, Microsoft Project, AutoCAD etc.
• Candidates with proactive attitude and responsibility good collaboration experiences in construction project.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

The Sales Engineer will work hand-in-hand with Sales, Product, Engineering, and Marketing, and will be responsible for providing technical expertise to make Snowflake customers successful. The sales engineer will have a broad range of skills and experience ranging from data architecture to ETL/ELT, data science, security, performance analysis, analytics, etc. You will have the insight to make the connection between a customer’s specific business problems and Snowflake’s solution, the customer-facing skills to communicate that connection and vision to a wide variety of technical and executive audiences, and the technical skills to be able to not only build demos and execute proof-of-concepts but also to provide consultative assistance on architecture and implementation.

The Sales Engineer has the willingness to jump in and do what it takes to make Snowflake and our customers successful. It means keeping up to date on the ever-evolving technologies for data and analytics in order to be an authoritative resource for both Snowflake and customers. You will work collaboratively with a broad range of people, both inside and outside the company.

RESPONSIBILITIES:

• Present Snowflake technology and vision to executives and technical contributors at prospects and customers
• Work hands-on with prospects and customers to demonstrate and communicate the value of Snowflake technology throughout the sales cycle, from demo to proof of concept to design and implementation
• Maintain a deep understanding of competitive and complementary technologies and vendors and how to position Snowflake in relation to them
• Collaborate with Product Management, Engineering, and Marketing to continuously improve Snowflake’s products and marketing
• Be an advocate and develop mutual trust with the technical audience on the customer side

MINIMUM REQUIREMENTS:

• Minimum 10-12 years of experience working in customer facing sales engineering (tech pre-sales) role
• Strong competency on modern data stacks, ETL/ELT, data warehouse/lake, data science and data apps
• Outstanding skills presenting to both technical and executive audiences, whether impromptu on a whiteboard or using presentations and demos
• Hands-on expertise with SQL (Python knowledge would be a bonus)

STRONGLY DESIRED:

• Data Science knowledge and experience
• University degree in computer science, engineering, mathematics or related fields, or equivalent experience
• Software development experience with Java, Spark and other scripting languages
• Extensive knowledge of and experience with large-scale database technology (e.g. Netezza, Exadata, Teradata, Greenplum, Hadoop etc.) and cloud data platforms
• Experience and track record of success selling data and/or analytics software to enterprise customers; includes proven skills identifying key stakeholders, winning value propositions, and compelling events
• Sound understanding and experience in the Singaporean market and technology ecosystem

ADDED BONUS FOR:

• Strong Data Science/AI/ML experience across a variety of platforms
• Familiarity and experience with common BI and data exploration tools (e.g. Tableau, PowerBI, Metabase etc)
• Cloud Provider Experience - Amazon AWS, Microsoft Azure, and Google Cloud
• Experience using AWS or Azure native services such as AWS S3, AWS Glue, AWS SageMaker or Azure Blob Storage, Azure Data Factory, Azure Database Migration Services
• OLAP Data modeling and data architecture experience
• Experience selling enterprise SaaS software
• Proven success at enterprise software start-ups

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Key Responsibilities

• Take charge of facility gas/chemical package concept design and RFP Preparation for 300mm semi-conductor Fabrication plant.
• Supervise and monitor EPC contractors or design consultants’ design progress.
• On-site management MEP package construction schedule and commissioning.

Education Qualification & Essential Experiences

• Bachelor's degree in Civil Engineering or related field.
• 300mm fab facility gas/chemical system operating experience.
• Good written and verbal communication skills in English
• Good skills of computer software e.x. Microsoft Office, Microsoft Project, AutoCAD etc.
• Candidates with proactive attitude and responsibility good collaboration experiences in construction project.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible and focus on creating an engineering plan for land development based on their calculations and any research conducted. They should have experience with AutoCAD and be able to utilize strong design skills in order to create visual aids. By utilizing strong organizational and communication skills, this candidate will also have the ability to execute a project based on the criteria outlined.

Key Responsibilities

• Take charge of facility CIVIL&MEP package concept design and RFP Preparation for 300mm semi-conductor Fabrication plant.
• Supervise and monitor EPC contractors or design consultants’ design progress.
• On-site management CIVIL&MEP package construction schedule and commissioning.

Education Qualification & Essential Experiences

• Bachelor's degree in Civil Engineering or a related STEM field.
• More than 5 years of construction project management experience, including 300mm semi-conductor Fabrication plant construction experience.
• Good written and verbal communication skills in English
• Good skills of computer software e.x. Microsoft Office, Microsoft Project, AutoCAD etc.
• Candidates with proactive attitude and responsibility good collaboration experiences in construction project.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Tecson Engineering has been serving Singapore's rail and marine sector as a sub contractor with humility since 1986. Specialising in Rail Engineering, Maintenance, and Repair works, our dedication to excellence is unwavering. With a focus on collaboration and integrity, we tailor our solutions to meet your specific needs. Our experienced team is committed to delivering high-quality service that exceeds expectations.

Postion : Testing and Comissioning Engineer

Duration: Min. 1 year (with possible extension)

Venue: Multiple Locations within Singapore (Depots, Site office, Main Office) - Depending on projects.

Job Description

Detailed Main Tasks & Responsibilities:

• Support software verification and validation processes.
• Participate in onsite activities including system installation, system configuration, and pre-on-site test activities.
• Lead assigned dedicated work scope of Test and Commissioning (T&C).
• Participate and coordinate on-site test and commissioning activities with customers as witnesses.
• Conduct all required test procedures, methodologies, and equipment testing activities related to the project to obtain sign-off from the customer.
• Prepare technical proposals (testing and commissioning) for submission to regulatory authorities.
• Arrange all test equipment required for testing in coordination with the site manager and team leader.
• Mobilize required test equipment and ensure readiness for testing.
• Coordinate and liaise with customers on the application of Permit-To-Work for testing activities.
• Document and communicate procedures, configurations, and standards effectively.
• Prepare and compile test reports for submission to customers.
• Prepare and draft Method Statement Risk Assessment.
• Supervise and monitor site test activities for each specific T&C work.
• Provide support to team leaders and site engineers for all safety-related requirements.
• Develop test plans and test procedures for Site Acceptance Tests (SAT), Interface Tests (IFT), and System Integration Tests (SIT).
• Plan scheduling and job allocation for activities in coordination with the planner.
• Participate in technical discussions and report preparation.
• Organize training programs.
• Maintain and ensure the site is clear and tidy after each deployment.
• Troubleshoot and create tools to resolve incidents.
• Strive to improve the stability, security, efficiency, and availability of systems by applying software engineering practices and implementing application monitors and alerts.
• Be proactive in helping the team in any other areas within the scope of the software development life cycle.
• Handle ad hoc work, including administrative support, special projects, and on-site assistance, requiring flexibility and quick task adaptation.

Requirements:

• Minimum Diploma or Degree in Electrical Engineering, Electronics Engineering, or Mechanical Engineering.
• At least 2 years of relevant working experience in a railway environment.
• Proficiency in Linux operating system internals and network concepts.
• Experience developing tools using scripting languages such as Python.
• Ability to learn new technologies in complex operational control systems.
• Systematic problem-solving approach, coupled with effective communication skills and a sense of drive.
• Able to understand the regulation and requirements of local electrical practices and regulatory requirements.
• Computer literacy.
• Ability to prepare test procedures and relevant technical documents.
• Ability to learn and perform cut-in/cut-out of circuits for new systems or reroute cables/systems requiring T&C.
• Willingness to work night shifts, weekends, and on-call duty.
• Positive work attitude with initiative.
• Team player.

Interested Applicants, please email your resume to us at [email protected].

• Provide technical subject matter expertise to enhance the electrical reliability and ensuring all KPIs are met.

• Improve reliability of electrical equipment by implementing repair recommendations and conducting inspections based on engineering codes and standards.

• Provide troubleshooting services to resolve electrical issues impacting safety, quality and reliable plant operations.

• Offer technical reliability guidance to site maintenance team during unplanned electrical outages.

• Liaison with OEMs and vendors for reliability improvement works and raise PRs for spares and services.

• Develop and implement preventive maintenance programs, analyze reports and address recurring issues.

• Roll out reliability improvement programs for the site based on global directives.

• Identify, procure and manage the critical spares required for electrical maintenance.

• Lead reliability-related RCA/Failure Investigations and conduct FMEA.

• Review and grade the low level RCAs performed by technicians and suggest action plans.

• Lead the RCM and CERR programs for electrical discipline addressing critical issues and bad actors.

• Provide technical support for process safety studies like PHA related to electrical discipline.

• Execute Turnaround job scopes for electrical discipline and ensuring all the TA KPIs are met.

• Review standard maintenance procedures and risk assessments for electrical equipment.

• Support global and site audits related to electrical reliability and close assigned action items.

• Raise MOCs for new projects and non-RIK modifications related to reliability improvement.

• Provide cost-saving ideas and productivity projects to reduce maintenance and TA costs.

• Review and optimize the warehouse inventory stock for electrical discipline-related spares.

• Support procurement teams in the vendor selection and approval process.

• Coordinate with OEM, electrical vendors, service contractors to define scopes, schedules and progress updates.

• Prepare five-year capital plan for discipline-related projects and lead reliability improvement capital projects.

• Expertise in electrical system studies such as short-circuit calculations, load flow analysis, relay coordination, motor starting analysis, harmonics studies and arc flash analysis.

• Proficiency with electrical equipment such as MV/LV switchgear, induction motors, power and control cables, bus ducts, UPS systems, transformers, diesel generators, VFDs, and SS.

• Good understanding of single line diagrams, control schematics, interconnection diagrams and logic diagrams.

• Strong knowledge of Singapore’s earthing, lightning protection

requirements and hazardous area classification.

• Review vendor drawings and electrical design calculations for electrical equipment and perform FAT of electrical systems at

OEM/Vendor sites for electrical projects.

• Execute SAT, loop testing, interlock, function testing, assist in electrical pre-commissioning and commissioning activities for electrical projects.

• Prepare project close-out reports, hand over systems to operations and update technical documentation.

• Participate and support the safety, quality and reliability programs of the site.

• Collaborate with multidisciplinary teams to ensure performance

standards are met by implementing best practices and maintaining compliance with industry standards.

• Mentor electrical team members in areas of technical expertise and provide training to in-house electrical contractors and operations team on mandatory electrical trainings.

• Network with peers and industry experts to adopt best practices for technology improvement and reliability programs.

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Lead development of new process to recycle and reuse metal scraps.
• Research and develop process of upcycling metal scraps (titanium/aluminum alloy).
• Research recycling of 3DP metal powders and reduction of raw material cost.
• Provide development plan and risk mitigation for projects to management.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new material or new technology development.

Requirements:

• Masters / PhD in Materials Science, Metal Material Engineering or Analytical Chemistry.
• 2 years of relevant R&D working experience preferred.
• Have experience in metal material development and qualification in either mold, fixture or product.
• Possess knowledge in material characterization and metal powder production process.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

Our Client is in the Aviation Industry. Due to their current expansion plan, they are looking for an Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibilities;

• Ensure product and process quality by managing the Quality Management System (QMS) in compliance with government regulations, aviation authority standards, and customer requirements.
• Update and refine quality procedures and control instructions to align with operational and regulatory standards.
• Collaborate with customers, vendors, and suppliers to address non-conformance issues.
• Perform root cause analysis and implement corrective actions to reduce poor quality costs.
• Conduct internal audits to evaluate compliance with ISO 9001, AS9100, and NADCAP standards.
• Carry out vendor and on-site audits as required to ensure quality performance.
• Ensure strict adherence to customer and regulatory authority standards and specifications.
• Lead efforts to minimize the cost of poor quality and reduce scrap through effective quality management practices.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical or Aeronautical Engineering
• Min 2 years experience in ISO9001 / AS9100 Quality Management System and NADCAP process
• Experience and knowledge in fishbone diagrams, FMEA and 5-whys methodology
• Able to read and interpret technical and blue print drawings

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Responsibilities

• Prepare submissions and clear authorities’ requirements which will include drawings, design calculations and report writing and other relevant material to meet the submission requirements
• Responsible for timely submission of reports and completion of projects for tender/submission with target dates
• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner
• Manage budget and purchase equipment/materials
• Attend meetings during course of construction of projects
• Monitor the progress of civil works and ensure that jobs are completed on schedule
• Responsible for all the site implementation and completion towards management target, client’s expectation and compliance to authorities’ regulations
• Work under the advice of the Safety Officer to adhere to compliance & safety requirements with regulatory and industry standards during the construction phase
• Candidate to be able to work shift works due to the demands of the project
• Responsible for on-site technical / engineering / administrative matters
• Candidate expected to work in a team, those who possess team work spirit is welcome to join.

Requirements

• Diploma/ Degree in Civil Engineering or relevant
• Minimum 3-6 years’ engineering experience
• Proven working experience in civil engineering
• Excellent knowledge of design and visualizations software such as AutoCAD,Civil 3D or similar
• Willing to work at construction sites
• Ability to communicate and work with client, consultant and subcontractor
• Able to work under pressure and in fast-paced environment
• Able to work collaboratively with others
• Class 3 driving license
• Familiar with construction field
• Excellent written and verbal communication skills
• Proficient in Microsoft Office Suite (Word, Excel, PowerPoint)Autocad
• Excellent communication and interpersonal skills. Must be able to read and write English
• Ability to think strategically
• Outstanding Problem-solving skills
• Strong, dynamic working style

Your resume must include the following information: -

1. Current and expected salary
2. Reasons for leaving
3. Date of availability

Other information

• Working hours: Monday to Friday, 9am to 6pm
• saturday 9am to 5pm
• Require to be reachable day and night
• Salary: $3,500 to $4,000

For interested parties, please send your resume to:

[email protected]

HAZARI ENGINEERING & RENOVATION PTE LTD

Whatsapp: +6580376525

JOB DESCRIPTION

Job Title

Civil and Structural Engineer

Occupation

Building Construction Engineer

Job Description & Requirements

Roles & Responsibilities

Job Descriptions:

• Perform Civil/Structure engineering design works
• Analysis on structural components with engineering software
• Determine best materials and methods with Professional Engineers
• Liaise with Architects on design and safety of structure
• Prepare drawings, specifications and computer models of structure
• Liaise with Clients, Consultants and Authorities for management of project
• Responsible for on-site technical / engineering / administrative matters
• Involve in project planning, implementation and close monitoring of projects
• Ad-hoc duties as assigned by the Senior Engineer

Requirements:

• Candidate must possess at least Degree in Civil/Structural Engineering (degree recognized by PE Board preferable)
• Minimum 1 years’ relevant experience requried; non entry level candidate is desired
• Required Skill(s): Good communication and interpersonal skills, ability to liaise with all levels of people
• Relevant experience in design of Buildings, Civil and Infrastructure works
• Preferably with project site co-ordination experience
• Familiar with local laws, design codes and submission requirements is advatangeous
• Knowledge of engineering software and MS Office
• Proficient in AUTOCAD and Civil and Structural Engineering software applications
• Entry Level candidates are encouraged to apply

Please indicate reason for leaving each employment and expected salary in your CV.

Salary package shall depends on candidates' working experiences and qualifications.

Japanese MNC

Salary $2600-$3000

Location: Ubi

Industry: Electronic Component Manufacturer

Monday to Friday 8.30am to 5pm

Requirements

• Electro-mechanical engineering background preferred and the company will provide necessary training for the candidate to assume this position
• Ability to travel at short notice to S.E. Asia and other markets as required by the superior

Job Roles

Technical aspects

• To inspect, service and maintain our company’s crimping tools, machines and equipment to ensure they remain in tip top condition prior to shipping to our customers
• Provide on-site after-sale service such as repair, replace spare parts and provide technical education to the customers who may encounter technical issues when operating our crimping tools, machines and equipment
• Troubleshoot, analyse and recommend service or repair methodology on the crimping tools, machines and equipment to the customers whenever there is a technical breakdown affecting their production operation
• Overhaul and inspect conditions of crimping tools, machines and equipment returned by the customers
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

• Plan and execute corrective/preventive maintenance on facility equipment and plant equipment to ensure good efficiency and availability. Generate equipment and facilities related records/reports/ documentations on above activities.
• Implement TPM strategy. Responsible for tracking machinery spare parts usage, maintaining adequate quantity, critical parts requirement, spare parts management, continuous improvement, and ISO audits.
• Support EHSS related topics, ensure site is in full compliance with Environment, Health and Safety (EHS) and Security regulation and policy.
• Resolve various equipment performance issues internally before approaching equipment vendor. Review equipment log and technician feedback for quick solutions.
• Liaise and co-ordinate jobs to be performed by contractors for facilities and plant equipment. Ensure work completion and achieve high standard of work.
• Interpret electrical diagrams and mechanical drawings for equipment troubleshooting with at least 3 years hand-on experience
• Evaluate existing/new contractors’ performance and negotiate with them on quotations and service level.

Requirements:

• Min Diploma
• Hands on experience in mixer and milling equipment maintenance is an advantage.
• Knowledge in TMP, Equipment FMEA is an advantage.
• Knowledge in facilities maintenance (Electrical, water, AC) is an advantage.
• EHS competence, familiar with ISO45001 & ISO14000 is a plus.

Joy Yeow Zhi Qian

(CEI Registration No:R2096261)

Recruit Express Pte Ltd (EA Licence No: 99C4599)

Assistant Operations Supervisor

Salary: $2, 500 - $3, 500
Working Days: Mon - Friday, 8.30am – 5.15pm
Location: Office - Kwong Min Road (Boon Lay) | Travel to site if required

Operational Support:

• Coordinate and prioritize team activities to ensure smooth operations and timely issue resolution.
• Optimize resource utilization including manpower, equipment, and energy to enhance operational efficiency.
• Prepare comprehensive reports on Preventive Maintenance completion, including details on equipment lifecycle, recommended parts replacement.
• Document any parts that were replaced during PM or on Ad-Hoc Basis
• Update the equipment list monthly during the execution of Preventive Maintenance activities
• Ensure that end-end process of procurement of require Parts for maintenance is ordered.

Customer Relationship Management:

• Assist in maintaining strong relationships with customers, dealers, and distributors.
• Collaborate with the Account Manager in addressing key customer complaints and conducting satisfaction investigations to implement improvement plans.
• Conduct training sessions for technicians, customers, and dealers/distributors on the operation and maintenance of Commercial Kitchen Equipment.

Team Management:

• Assist in training technicians as necessary to meet workload demands and quality standards.
• Supervise and manage a team of service technicians and in-house subcontractors.

Contract Management:

• Support in managing contract commitment in terms of KPI (Critical Equipment Reliability; CM Completion Rate; PM Completion Rate, Emergency Response SLA; Hygiene Audit; Compliance to Fire Safety, WSH, GRA and Security Access Requirement; Service Quality Survey).

Health, Safety, and Compliance:

• Drive EH&S initiatives, promote EHS awareness, and monitor compliance within the team.

Performance Metrics:

• Collaborate with the Account Manager to track and improve KPIs such as productivity, field expenses, and Aftermarket Service Sales revenue/margins.

Job Requirements:

• Diploma in Mechanical/Electrical/Electronic Engineering or equivalent practical experience.
• With experience in a similar supervisory role within Aftermarket Service Industry
• Proficiency in Microsoft Business Central or similar tools.
• With understanding of EH&S standards and practices.
• With experience in conducting training sessions for technicians, customers, and dealers/distributors on Commercial Kitchen Equipment

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

• Location: Gul Crescent
• Working Hours: 8.15am - 5.30pm
• Working Days: 5 Days [Monday - Friday]
• Salary: $3000 - $4000 + $1020 (transport allowance)+ $70 (phone allowance)

The role is to market a full range of Professional & Industrial Cleaning equipment, and accessories & tools, to corporate customers, with an emphasis in oil and gas sectors.

Responsibilities:

• Serve existing assigned accounts and prospect potential new customers
• Learn & familiarise our products well, understand users’ needs, and so be able to offer solutions and assistance to meet their requirements
• Perform hands-on product demonstrations, as well as occasionally conduct presentations to mid-size audiences including management levels

Requirement

• Polytechnic Diploma or equivalent; preferably in a business associated or engineering related field
• Experienced in corporate/industrial sales, especially in the oil and gas setting
• Preferably hold a Class 3 driving license and own a car

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

• Plan and execute corrective/preventive maintenance on facility equipment and plant equipment to ensure good efficiency and availability. Generate equipment and facilities related records/reports/ documentations on above activities.
• Implement TPM strategy. Responsible for tracking machinery spare parts usage, maintaining adequate quantity, critical parts requirement, spare parts management, continuous improvement, and ISO audits.
• Support EHSS related topics, ensure site is in full compliance with Environment, Health and Safety (EHS) and Security regulation and policy.
• Resolve various equipment performance issues internally before approaching equipment vendor. Review equipment log and technician feedback for quick solutions.
• Liaise and co-ordinate jobs to be performed by contractors for facilities and plant equipment. Ensure work completion and achieve high standard of work.
• Interpret electrical diagrams and mechanical drawings for equipment troubleshooting with at least 3 years hand-on experience
• Evaluate existing/new contractors’ performance and negotiate with them on quotations and service level.

Requirements:

• Hands on experience in mixer and milling equipment maintenance is an advantage.
• Knowledge in TMP, Equipment FMEA is an advantage.
• Knowledge in facilities maintenance (Electrical, water, AC) is an advantage.
• EHS competence, familiar with ISO45001 & ISO14000 is a plus.

Joy Yeow Zhi Qian

(CEI Registration No:R2096261)

Recruit Express Pte Ltd (EA Licence No: 99C4599)

Location: Gul Crescent

Working Hours: 8.15am - 5.30pm
Working Days: 5 Days [Monday - Friday]
Salary: $3000 - $4000 + $1020 (transport allowance)+ $70 (phone allowance)

The role is to market a full range of Professional & Industrial Cleaning equipment, and accessories & tools, to corporate customers, with an emphasis in oil and gas sectors.

Responsibilities:

• Serve existing assigned accounts and prospect potential new customers
• Learn & familiarise our products well, understand users’ needs, and so be able to offer solutions and assistance to meet their requirements
• Perform hands-on product demonstrations, as well as occasionally conduct presentations to mid-size audiences including management levels

Requirement

• Polytechnic Diploma or equivalent; preferably in a business associated or engineering related field
• Experienced in corporate/industrial sales, especially in the oil and gas setting
• Preferably hold a Class 3 driving license and own a car

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

KEY DUTIES AND RESPONSIBILITES:

• Perform various activities and tasks required in the tablet coating production areas.
• Operate all relevant equipment, clean, assemble and maintain the cleanliness of the equipment.
• Perform and maintain the documentation of operations in accordance with cGMP requirement.
• Operate the equipment appropriately in accordance with Standard Operating Procedure / batch document.
• Perform online monitoring of in process parameters / checks throughout the batch.
• Complete all relevant records and other documentation required for tablet coating, maintenance and cleaning of equipment in the work area.
• Perform all activities in accordance with cGMP.
• Maintain the cleanliness of work area to ensure cGMP compliance.
• Perform all other relevant duties required to meet the schedule.
• Check relevant material and product details against batch document
• Co-ordination with Engineering for break down rectification of coating and related solution mixing equipment.
• Involve in equipment / process qualification.
• Participate in investigation of process deviation, cGMP and all other compliance related matters, where applicable.
• Ensure compliance to GxP / Safety / Quality policies.

REQUIREMENT

• Good understanding of safe working practices and cGMP.
• Experience in tablet coating of oral solid dosage manufacturing is preferred.
• A good team player with positive learning attitude.
• Willing to work in Tuas area, in cleanroom environment with full gowning.

EDUCATION & EXPERIENCE

• Minimum GCE 'O' level or NITEC or Higher NITEC or Diploma in Biotechnology /Biomedical / Mechanical / Mechatronics Engineering or relevant disciplines
• With 2-5 years of manufacturing experience in Pharmaceutical or related industries.
• Entry level NITEC / Higher NITEC / Diploma candidates are welcome to apply.