As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above
Location: Fab10N
Closing Date: Until filled

As a NAND CMOS Device Engineer, you will help set the direction for current and future CMOS technology for Micron’s NAND Memory Technology Roadmap!

You will work with the Design Team to set electrical targets and define transistor structures to meet these targets. You will guide the device technology development and be in close relation with Process Integration, Design Engineering, Design, Design Rules, Reliability, Transistor Modeling, TCAD (Technology Computer-Aided Design), and Parametric Test, to name a few! In addition, you will ensure that the developed technology is manufacturable and highly yielding and that these considerations are designed into the technology from the start.

Together with your peers, you craft and implement our NAND-CMOS roadmap and make sure to align to product roadmaps

• You give directions on how to improve our device portfolio, both in performance and cost effectiveness
• You define, execute, and analyze silicon experiments for future device generations
• Interface with Design Engineers to define transistor targets, deliver transistor models, and optimize critical layout constrained Design Rules
• Work with TCAD simulation group to develop strategies for transistor structures to meet targets
• You strive to ensure that transistor models are correctly targeted to anticipate final silicon
• Define electrical test structures for transistors, isolation, design rule verification, and process monitoring
• Highly motivated to ensure transistors are developed meeting the required reliability standards
• You take initiative to collaborate with Manufacturing to ensure transistors are performing as expected and to debug yield/reliability issues
• You foster and enable a collaborative working style and team spirit by mentoring less experienced colleagues

Minimum Qualifications:

• MS/PhD in Electrical Engineering or related field, PhD in Semiconductor Device Technology preferred
• 5 plus years industry experience in the field of CMOS device design, simulation, characterization
• Experience in developing advanced logic transistor technologies
• Experience in developing Analog FETs operating at higher Voltages
• Preferred: Experience in the field of High Voltage applications, reliability, characterization, device development
• Understanding of analog design concepts
• Good presentation skills
• Excellent team and mentoring skills

Develops new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing. Coordinates design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods. Compiles and evaluates test data to determine appropriate limits and variables for process or material specifications. May conceive and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes.

Job Responsibilities:

• Provide assistance with maintenance projects.
• Manage system administration, network support, implementation, and troubleshooting across Windows, Linux, and Unix systems.
• Hands-on experience in managing LAN, WAN, routers, switches, DNS, VPN, and firewalls is preferred.

Requirements:

• Minimum Diploma or Degree in Engineering (Electrical/Electronic), Computer Science/Information Technology, or a related field.
• A team player with strong communication and interpersonal skills.
• Capable of working independently with minimal supervision.
• Willing to participate in a rotating schedule for standby duties.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Nyon Hock Sen
EA Personnel Reg No: R24124070

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Review project specs to ensure equipment meets contract requirements
• Prepare and approve instrument and electrical deliverables (e.g. wiring diagrams, lists, data sheets)
• Create material requests and evaluate bids for electrical and instrument equipment
• Develop engineering standards and procedures for design
• Monitor project costs and schedules
• Attend technical meetings and address client feedback
• Support plant start-up and on-site troubleshooting
• Provide technical support and estimates to the sales team
• Advise engineers and Project Managers
• Follow company health and safety guidelines

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5 years of relevant experience
• Familiar with key engineering concepts and practices
• Strong organizational and multi-tasking skills
• Excellent problem-solving and analytical abilities
• Proficient in Microsoft Office, Microsoft Project, and AutoCAD
• Strong verbal and written communication skills
• Able to work independently with attention to detail
• Good teamwork skills
• Knowledge of hazard area classification
• Fluent in English (speaking and writing)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 12 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of Hospital and Architecture work
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Create software solutions for automated Computer Vision Equipment.
• Develop software for GUIs, manage large datasets, and implement multi-threaded programming.
• Design and implement Image Processing and Computer Vision Algorithms, contributing to the Software Development Life Cycle.

Requirements

• Skilled in Visual Studio programming and proficient in C++.
• Expertise in vision inspection, computer vision, and image processing.
• Familiarity with C# and experience in Deep Learning for Defect Classification are advantageous

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Position title : Vision Software Engineer

Location: Admirality Street
Working Days: 5 Day A Week
Working hours : 9:00am - 6:00pm
Salary : $5000 - $8000 (depends experience)

Job Summary:

We are seeking an experienced Software Engineer to join our team, responsible for
designing, developing, and maintaining software applications for vision systems.

Responsibilities:

• Design and develop PC based automated visual inspection systems for our full range of semiconductor equipment.
• Evaluate and feasibility study on the customer’s vision specifications.
• Responsible to integrate any new vision hardware (camera, frame grabber, etc) onto the vision software.
• Troubleshooting and improve the processing time of the inspection.
• Provide technical support to internal and external customers to fulfill the inspection requirements. Change the vision inspection algorithm to improve the inspection capabilities and its performance.
• Be the key driver for continuous improvement plans for new and existing inspection capabilities.
• Coordinate with customer for any new enquiry with sale personnel if needed.
• Work closely with the vision application and optics team members to produce the best inspection result.
• Build and nurture a culture in engineering organization of harmony, quality, ownership, collaboration, continuous improvement and data-driven decision making.

Requirements:

• BS Science Diploma or higher in electrical and electronic, mechanical, or mechatronics engineering or related technical discipline or equivalent practical.
• Technical troubleshooting experience.
• Minimum 3 years in related field.
• Relevant technical work experience including automation machine system troubleshooting.
• Experience working with end customers.
• Understanding semi-conductor manufacturing process, vision inspection settings, machine software settings and configuration or equivalent practical experience.
• At least 3+ years of experience in software development with C#, WPF, Image Processing , Halcon (bonus)

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

The Job

You will join the Manufacturing Section which is equipped with the latest manufacturing technology and advanced engineering control, and lead the technicians to achieve smooth and safe plant operation and provides technical support for shift operation, process optimization and quality conformance.

The Daily

• Lead a group of Production Technicians in the safe and smooth running of the production.
• Assist the Process Engineer to conduct activities and projects to optimize operation during Shift to achieve operational and cost efficiency.
• Troubleshoot plant/equipment/quality issues and recommend countermeasures.
• Monitor and ensure plant equipment integrity and reliability.
• Assist the Process Engineer to support Shift operation by providing suitable operating conditions for stable plant operation and product quality control.
• Train and develop team members.

The Essentials

• Possess Degree in Chemical Engineering or its equivalent, preferably with 1 to 2 years of experience in petroleum, chemical or polymer industries.
• Have knowledge of process control and troubleshooting, hands on knowledge of plant equipment and instrumentation.
• Essential prerequisites include good analytical and technical report writing skills, ability to be a team player with leadership, initiative, drive & commitment, able to take pressure and able to communicate well with others.
• This is a shift work position (i.e. Rotating AM and PM shifts, including weekends and Public Holiday) and there will be scheduled off days.

BMS, Building Management System Engineer x 1

5 day week. Attend site rectification, able to work from home if site does not require.

Job Description

• Programme DDC panel
• Well verse in digital and analogue systems.
• High level interfacing with various communications. Modbus, IP, etc.
• Control, monitoring, systems.
• Hvac control, Electrical control, Power usuage
• Attend to fault call.
• Good troubleshooting skill and experience

Dip/ Degree in Engineering

Good understanding and hands on experience in programming of BMS systems is a MUST.

Job Scope:

• Oversee day-to-day site activities to ensure project progress aligns with the schedule.
• Supervise construction work to ensure compliance with design specifications and safety standards.
• Manage site resources (materials, labor, and equipment) for efficiency and cost-effectiveness.
• Provide technical guidance to the construction team and resolve on-site technical issues.
• Inspect construction work to ensure adherence to quality standards and project specifications.
• Enforce health, safety, and environmental regulations on-site.
• Conduct site inspections, risk assessments, and safety audits.
• Liaise with project managers, contractors, and subcontractors to ensure smooth project execution.
• Maintain accurate site records, including progress reports and documentation of issues.
• Coordinate deliveries of materials and ensure proper storage on-site.

Requirements:

• 2-3 years' experience in construction
• 1 year MRT experience
• Minimum 2 years' experience in underground/tunneling projects
• Experience with diaphragm walls and bored-piling
• One position must have lifting engineer certification or relevant experience

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Scope:

• Develop and maintain relationships with key clients and prospects.
• Identify customer needs and provide technical solutions that align with product offerings.
• Conduct product presentations and demonstrations to clients.
• Provide technical support and advice to customers during the sales process.
• Prepare and deliver detailed product proposals, quotations, and technical documentation.
• Collaborate with engineering and product teams to ensure customer requirements are met.
• Drive sales growth through direct sales activities and follow-ups.
• Negotiate terms and close sales agreements.
• Conduct market research to identify new business opportunities and market trends.
• Provide post-sales support and ensure customer satisfaction.
• Attend trade shows, conferences, and industry events to promote products and services.
• Track and report on sales performance, targets, and project progress.
• Ensure compliance with company sales policies, pricing strategies, and technical standards.
• Assist in the development of marketing materials and sales tools.

Requirements:

• Diploma/Degree in Electronics, Electrical, Engineering, Industrial, or Mechatronics
• No experience required, entry-level candidates welcome
• Passion for automation, creative and adaptive approach
• Good communication skills, able to explain technical concepts clearly
• Product training provided
• Knowledge of PLC programming, touch panels, control, and automation

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Hands on experience in design, implementation of Splunk architecture.
• Experience on Linux and Windows administration
• Able to do data onboarding, fields extraction according to Splunk best practices.
• Able to provide Splunk guide and Splunk operation document
• Able to setup forwarders and onboard new data sources into the environment.
• Able to troubleshoot and identify Splunk issue relating to performance and searches.
• Able to fine tune Splunk use cases (rule) and optimize searches performance.
• Able to create new dashboard to enhance the visualization of the data and create Splunk use cases for alerts/reports.
• Knowledge on index segregation and user restriction setup
• Knowledge on using Splunk Enterprise Security
• Able to do Common Informational Model for Enterprise Security.
• Good in communication and able to understand the requirements.

Responsibilities:

• Carry out structural design and analysis to meet project requirement.
• Prepare design calculations & shop drawings for submission.
• Provide general technical support to the in-house operations team.
• Technical marketing of structural strengthening products.
• Attend meetings with clients for pre and post contract to meet project requirement.
• Accountable for effective co-ordination of projects as assigned.
• Ensure all safety and quality assurance procedures and standards are followed.

Requirements:

• Must possess at least a good Degree in Engineering (Civil) recognised by the Ministry of Manpower, Singapore and is familiar with the British American Design Standards, and Eurocodes.
• Able to perform structural analysis using design software such as STAADPro ETABS, Prokon etc.
• Familiar with AutoCAD application.
• Good command of spoken and written English.
• Possess initiative, analytical thinking abilities and able to work both independently and as a team.
• Possess positive attitude and interpersonal relationship skills.
• Foreigners: Minimum of two years' experience in local consultancy firms will be an advantage.

Responsibilities:

• Oversee inventory to meet production demands and avoid shortages.
• Collaborate with internal teams and suppliers to ensure timely material delivery.
• Adjust production schedules as necessary to meet deadlines.
• Ensure product quality by working closely with the testing team.
• Schedule production staff according to workload requirements.
• Utilize ERP/MRP systems for streamlined planning and scheduling.
• Supervise production staff for effective task completion as required.

Requirements :

• Diploma in Manufacturing Engineering or equivalent.
• At least 1 year of working experience in electronics manufacturing.
• Experienced in material planning, inventory management, and proficient in ERP and MRP systems.
• Possess leadership and supervisory skills.

_________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• 5 days, Boon lay, Transport provided to & fro
• $4200 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement
• Medical/dental benefits (insurance covered)

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Senior Project Engineer (Demolition Works)

Salary: $3800 - $5000

Working Days: Mon - Fri: 9am - 530pm | Sat: 9am - 12pm

Working Location; Pioneer Rd 628500 (Transport Provided from Joo Koon MRT)

Job Responsibilities:

• Supervise new erections, additions, and alterations (A&A) to existing buildings, including earth retaining and stabilizing systems, as well as specialist designs for demolition works.
• Plan and implement the project, ensuring all construction activities on-site align with the master and detailed work programs.
• Work independently and as an integral member of the Site Management team.
• Prepare, plan, and submit project-related documents such as schedules, method statements, design plans, risk assessments, monthly reports, etc.
• Supervise the execution of construction works to ensure compliance with contract specifications, construction drawings, the company’s quality standards, Environmental, Safety & Health (ESH) practices, and other contract documents.
• Coordinate and liaise with the client’s representatives, relevant authorities, consultants, subcontractors, suppliers, etc., to address both technical and non-technical issues and document resolutions.
• Plan and coordinate site works while resolving drawing details and discrepancies.
• Identify potential and existing problems impacting the work schedule, offering solutions to the relevant team/department.
• Liaise with clients or consultants for site inspections and technical report submissions, ensuring all necessary records are maintained on-site.
• Assist the Contracts Department (QS) in verifying progress payments and claims from contractors.
• Attend regular meetings with clients’ representatives, consultants, and contractors to ensure project progress is on schedule.
• Establish and maintain an effective document control system, conducting reviews of detailed design drawings, project documents, and specifications.

Job Requirements:

• A minimum of a Degree in Civil Engineering, Architecture, or an equivalent field.
• At least 10 years of project or site management experience, particularly in Demolition projects.
• Ability to lead site management activities.
• Familiarity with wire saw cutter and waterjet cutter methods for demolition is a must

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Our client is a well-established MNC, market leader in the IT industry. Due to their current expansion plan, they are looking for an Information Security Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities:

• Handle post-sales activities of related products and solutions.
• Engage in the implementation of large-scale projects.
• Offer on-site services, including deployment, testing and preparation of documentation.
• Provide technical assistance to maintain high levels of customer satisfaction.
• Troubleshoot customer inquiries by leveraging existing knowledgebase resources and resolving known issues.
• Be available for standby support to manage 24/7 maintenance calls.
• All other adhoc duties as assigned.

Requirements:

• Minimum diploma in IT / Cybersecurity or other related field of studies.
• Minimum 2 years’ IT support experience.
• Certified CCNA or CCSA is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Summary

You will be working with our client who specialises in the healthcare and technology space. Our client is seeking a skilled Test Engineer with hands-on experience in Microsoft Dynamics CRM 365. The ideal candidate will have a strong background in testing enterprise applications, particularly Dynamics CRM, and ensuring the quality and functionality of business-critical system. The role requires an individual with a thorough understanding of testing methodologies and best practices.

Responsibilities

• Analyse business requirements and translate them into detailed test cases for Microsoft Dynamics CRM 365 applications.
• Create, review, and maintain comprehensive test plans, test scenarios, and test cases based on functional and non-functional requirements
• Execute test cases manually, including functional, integration, and regression testing for Microsoft Dynamics CRM modules.
• Identify, document, and track defects/issues found during testing in defect management tools like Jira, Azure DevOps, etc.
• Work in close coordination with business analysts, developers, and stakeholders to understand the functionality of CRM modules and ensure proper testing coverage.

Requirements

• Bachelors degree in Computer Science or equivalent
• At least 4 years of experience in manual testing, with at least 2-3 years focused on Microsoft Dynamics CRM 365
• Strong knowledge of Dynamics CRM functionality, including sales, marketing, service, and custom modules.
• Familiarity with SQL and the ability to query databases to validate data within CRM systems.
• Understanding of software development life cycles (SDLC) and testing methodologies (Waterfall, Agile).
• Experience with end-to-end testing of complex business applications and integrations
• Able to conduct Test Readiness Review (TRR) to ensure readiness of the test phase.
• Experience in API testing using postman.
• Basic knowledge of automated testing tools and scripting is an advantage.
• Experience in testing integrations with other Microsoft technologies (e.g., Power Platform).
• Experience in UAT coordination and user training.

If you are interested in this role and would like to discuss the opportunity further please click apply now or email Chew Kai-Xinn at [email protected] for more information.Only shortlisted candidates will be responded to, therefore if you do not receive a reply within 14 days please accept this as notification that you have not been shortlisted.Morgan McKinley Talent SolutionsMorgan McKinley Pte Ltd EA Licence No: 11C5502EAP Registration No: R2196712EAP Name: Chew Kai-Xinn

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

(Gov project, stable role) x 8

Singaporean Only, security clearance required

Salary range:

• Basic Salary $2800 - $3600 + Site Allowance + Standby Allowance + Other Benefits

Responsibilities:

• Perform Preventive & Corrective maintenance work on IT Network system involving fault troubleshooting, diagnosis & replacement of equipment/ component at permanent sites
• Perform testing of equipment
• Provide troubleshooting to technical problem on communication system

Requirements:

• Higher Nitec/ Diploma in Electrical/Electronics, Communications/ Computer Engineering or InfoComm Technology
• Training will be provided
• Able to perform standby duties (based on roster)

Additional Information:

• Stable role, Government Project (Singaporean Only)
• Working hours: Office Hours (Mon – Fri)
• Location: Near Choa Chu Kang MRT

Interested applicants simply email your resume to: [email protected]

We regret to inform that only shortlisted applicants will be notified.

• Design and develop ATE (Automated Test Equipment) programs for new products, covering both production and characterization testing.
• Engage in hands-on testing debugging, conduct RMA analysis, and enhance testing solutions for both hardware and software.
• Develop a test plan for the product, including scheduling, resource needs, and overseeing project tracking and execution.

Requirements:

• Degree in Electrical/Electronics Engineering
• At least 3 years of leadership experience in ATE test program development.
• Proficient in C++/ VB, ATE testers and Chroma.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at

www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Technical Sales Engineer
5 days
9am-6pm
Kallang
$4000-$6000

The Technical Sales Engineer is responsible for supporting the sales staff in presenting technical presentations of our products as well as assisting on installations of our products in both a pre and post-sales support role

Responsibilities:

• Provide pre- and post-sales technical support to customers
• Technical support of field service engineers and customers when required
• Evaluating and establishing vision system performance specifications
• Manage customer specific projects & documents

Requirements:

• Degree / Diploma in engineering discipline with minimum 1 year experience
• Knowledge in field servicing and semiconductor industry
• Knowledge in Die Sorter or Wafer Sorter will be preferred.
• Ability to troubleshoot electronics hardware system is an added advantage.
• Good Knowledge of PC hardware, OS and networking.
• Proficient in Microsoft application
• Min 1 year related experience. Technical and support to field service engineer and customer

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279