Primary Responsibilities:

• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 3 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

MAIN RESPONSIBILITIES:

The Field Service Engineer is responsible for providing technical field assistance in maintenance, operation, equipment installation and startup and/or shutdowns for all CPM processes. The Field Service Technician must have strong business and communications skills to establish and maintain strong relationships with the customer. Analytical and problem-solving skills are just as essential to this position.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Provide technical field assistance, in maintenance, installation, operation, and startup for CPM equipment; prepare customer field report after each trip.

· Perform inspections of existing CPM equipment during plant shutdowns, assist plant/contractors with recommended repairs/parts and provide each customer with a field report.

· Evaluate fabricated product when asked; prepare non-conformance report when necessary and work with internal and external customers to resolve issues.

· Provide technical training to relevant customer and responsible for tracking customer claim.

· Work integrally with internal employees and external customers to promote the CPM Aftermarket service, to meet group initiatives and objectives.

· Assist contractors in the erection of CPM equipment at customer site.

· Identify customer's needs and sales opportunities to help future growth.

· Participate in company meetings in order to increase communication, understanding, and teamwork.

· Cross train with engineers/technicians to learn technical processing information.

· Observe all customer and OSHA safety rules.

· Perform other related duties as required and assigned.

QUALIFICATION AND SKILLS:

· Associate degree or equivalent from a two-year college or technical school, preferably in Engineering.

· A minimum of 2 years of experience in animal feed or biomass related manufacturing industry.

· Good written and verbal communication skills.

· Establish and maintain effective working relationships with co-workers, customers, and vendors.

· High integrity and ethics.

· Working knowledge in AutoCAD.

· Required knowledge of Microsoft Office.

· Be able to communicate in English fluently and at least one local language.

· Ability to travel on need basis – domestically or internationally and up to 50% of the time.

SUMMARY

Direct Test Engineers I & II in operating within area of assigned responsibilities with a high level of efficiency, integrity and enthusiasm, striving to achieve excellence in all endeavors. Designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

LEADERSHIP AND MANAGEMENT RESPONSIBILITIES

Recruitment and Retention:

· Recruit and interview Test Engineers I & II.

· Communicate criteria to recruiters for Process Technician position candidates.

· Coach Test Engineers in the interviewing/hiring process.

· Monitor team member turnover; identify key factors that can be improved; make improvements.

Employee and Team Development:

· Identify individual and team strengths and development needs on an ongoing basis.

· Create and/or validate training curriculum in area of responsibility.

· Coach and mentor Test Engineers I & II to deliver excellence to every internal and external customer.

Performance Management:

· Establish clear measurable goals and objectives by which to determine individual and team results (i.e. operational metrics, results against project timelines, training documentation, attendance records, knowledge of operational roles and responsibilities, personal development goals).

· Solicit ongoing feedback from Assistant Test Engineering Manager, Workcell Manager (WCM), Business Unit Manager (BUM), peers and team member on team member’s contribution to the Workcell team. Provide ongoing coaching and counseling to team members based on feedback.

· Express pride in staff and encourage them to feel good about their accomplishments.

· Perform team member evaluations professionally and on time.

· Drive individuals and the team to continuously improve in key operational metrics and the achievement of the organizational goals.

· Coordinate activities of large teams and keep them focused in times of crises.

· Ensure recognition and rewards are managed fairly and consistently in area of responsibility.

Communication:

· Provide communication forum for the exchange of ideas and information with the department.

· Organize verbal and written ideas clearly and use an appropriate business style.

· Ask questions; encourage input from team members.

· Assess communication style of individual team members and adapt own communication style accordingly.

FUNCTIONAL MANAGEMENT RESPONSIBILITIES

Business Strategy and Direction:

· Know and understand the campus strategic directions.

· Define, develop and implement Test Engineering strategies, which contribute to the campus strategic directions.

· Provide regular updates to Assistant Test Engineering Manager on the execution of the strategy.

Cost Management:

· Identify creative ways to reduce cost by streamlining processes and systems (i.e. modification of responsibilities or consolidation of tasks, elimination of non-value-added processes, or complete re-engineering of processes and systems).

· Utilize tools to monitor departmental cost and cost trends, striving continuously to improve value.

· Provide feedback to Assistant Test Engineering Manager on cost and cost trends.

TECHNICAL MANAGEMENT RESPONSIBILITIES

· Perform duties, which involve conventional engineering practices that may include a variety of complex duties from ICT, FVT, ESS to System level test.

· Manage the engineering test function for standard and/or custom devices.

· Through subordinate supervisors or professional staff, identify and evaluate test procedures and test equipment required to perform quality checks.

· Compile and document data necessary to analyze performance and make recommendations for changes in the testing process.

· Assist/spearhead in the development of special test equipment and software text programs as required for the successful completion of project.

· Assist customer, setup training program for new product testing procedures.

· Provide training and assist test engineers.

· Act as the liaison and technical conduit for assigned customers.

· Explore new avenues and test technologies for quality improvements on product assigned.

· Perform detailed analysis on test quality of product assigned, identify trends and spearhead corrective actions.

· Monitor, through assigned test engineer, all NPI activities.

· Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor.

· Comply and follow all procedures within the company security policy.

MINIMUM REQUIREMENTS

Bachelors of Science in Electronics or Electrical Engineering from a college or university; and five to ten years experience

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Support the selection and design of components for inspection systems.
• Accurate documentation and supplier compliance with specifications.
• Provide troubleshooting support and manage the integration of new designs into manufacturing processes.

Requirements:

• Proficient in CAD software for electrical and schematic design.
• Experience in designing, fabricating, and testing PCBs and PCBAs is beneficial

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

PM Singapore is currently looking to expand the CQV capabilities. This role will be supporting one of our many clients in the field of commissioning, qualification and validation work within the Life Sciences space.

Your day to day role would involve the following activities:

• Planning, Performance, and Coordination of Computer System Validation, Equipment Qualification, Temperature Controlled Objects (Freezers, Incubator etc), Clean Utilities Validation and cleaning validation in accordance with internal procedures and industry standards.
• The qualification includes, FAT, SAT, IQ, OQ, PQ of any additional modifications of existing manufacturing process equipment, package units (e.g. Ultrafiltration Unit, Chromatography Columns, autoclave, FIT testers), commercial off the shelves (COTS) analytical instruments, freezers,
• Create, review and approve equipment qualification and analytical instruments lifecycle documentations, e.g. FAT, SAT, IQ, OQ, PQ protocols and reports, risk assessments, technical specifications.
• Can lead investigation revolving around discrepancies identified during qualification activities.

We would like to hear from candidates who have:

• Relevant experience in validation activities (including the creation, pre-execution approval, execution, post-execution review, and post-execution approval of all validation lifecycle documents)
• Leading daily validation meetings with cross functional teams in resolving validation issues.
• Experience in equipment qualification including analytical instrumentation and manufacturing equipment.
• Work experience in Pharmaceutical or BioPharma industries
• Hands on validation execution experience
• Able to execute activities in cGMP environment, including cleanrooms or technical areas.

Position

We are looking for L2 Application Ops Engineer to join our Application Services department to help us implement DevOps and accelerate the bank’s transformation. This a very hands-on technical role to drive continuous improvement initiatives on top of day-to-day BAU support. We want someone with fresh and relevant ideas who is passionate about learning new things and wants to develop themselves further.

Mission

The L2 Application OPS Engineer is responsible to ensure production stability and contribute to the continuous improvement of the applications in scope. You will manage incidents, changes and requests as per the company's standards and SLA to ensure a high quality of service. You will also be involved in major operations as per the requirements of the bank.

As we are covering the bank’s global operations, you will work in rotational shifts* and also be occasionally doing on-call support** during non-business hours. You will also be occasionally required to work on planned activities on the weekends or public holidays as per our operational requirements. This will be an opportunity to have a better perspective of what can be further improved in production!

*Rotational shifts: Members in the team will rotate accordingly around 3 shifts (time will shift to an hour later during the daylight saving time period in the year).

**On call support: This covers 7 consecutive days during non-business hours to manage escalated incidents and to work on planned changes, weekend included.

• Morning: 7am-4pm
• Afternoon:2pm-11pm
• Evening: 5pm-2am

Main responsibilities

You will mainly be responsible for:

Performing all run activities in respect of the company's process, ensuring:

– SLA and priorities are respected

– Appropriate reaction, in line with the severity of an incident or escalation.

– The company process are dully followed (service request, change, incident, problem management)

– Management of technical issues, escalations and ensuring good level of delivery

– Primary operational technical support and assist the functional support teams

– Good collaboration between various teams within ITS and also BLI

Continuous improvement of service

– Propose improvement and solution to reduce repetitive tasks

– Improving complex operations (DRP, Migrations, Major maintenance etc.)

– Improving reliability and quality of our systems (automation, monitoring, alerting, security, RCA etc.)

– Reducing time-to-market by implementing CICD pipelines where possible

– Improve and standardize existing workflow processes and framework

– Bridging the gap between Dev and Ops

Managing knowledge within the team

– Share the knowledge within AS teams through the WIKI

– Promoting knowledge sharing within the organization (trainings, documentations etc.)

Driving the most complex operations & ensures they are well prepared (involvement on DRP test, WIP, etc…).

– Act as global coordinator main events.

– Review of major releases roadmaps

– Ensure post checks are documented, performed and report is shared

Qualifications and Profile

The position requires a minimum of 3 years relevant experiences as a production support or at least infrastructure support or development role.

Functional

• No functional skills required. Experience in a banking environment is obviously a plus.

Technical and process

• Preferred

• Minimum 3 years of experience with UNIX environments

• Minimum 3 years of experience in scripting languages such as Python, Powershell

• Minimum 2 years of hands on experience in any of these tools and technologies such as Ansible, Gitlab, Azure Devops, Docker, Kubernetes

• Experience with task schedulers such as Control-M

• Good understanding of IT ecosystems and application architectures

• Knowledge about

• CICD pipelines, ITIL practices, Agile practices, Lean

• Observability tools such as Grafana, Kibana, Prometheus, or Dynatrace is a plus

Soft skills

• Fluent in English, French is a plus
• Good analytical and problem solving skills
• Proactive and able to propose new ideas
• Positive attitude towards continuous learning and improvement
• Team player
• Curious about new technologies

Next Step

Prepare your updated resume and expected package.

Simply click on 'Apply here' or email to [email protected] to drop your resume

All shortlisted candidates will be contacted.

Prasant Sirohi

EA License Number: 91C2918

Registration Number: R22106307

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, Design Verification

Responsibilities:

You will be responsible for verifying digital and mixed-signal designs, including systems-on-chip with multiple CPUs, digital signal processors, security hardware, and other logic for IoT applications.

• The right candidate will be a self-starter who assumes full ownership of DV tasks and delivers high-quality results.

• Develop test plans at block, sub-system, and chip level.

• Execute SoC-based verification at full-chip.

• Write C-based lib packages and tests.

• Architect and implement scalable and reusable test benches using SystemVerilog and UVM.

• Develop comprehensive test cases, stimulus generation, and checkers to achieve high coverage.

• Automating the test environment for randomized testing and scoreboarding.

• Utilize advanced debugging techniques to identify and resolve design and verification issues.

• Perform root-cause analysis and work with design teams to fix identified issues

• Define and track functional and code coverage metrics to ensure thorough verification.

• Ensure that verification quality meets or exceeds industry standards and project requirements.

• Edge-based AI inference is preferred.

Requirements

• BSEE /MSEE 5-8 years Degree of experience in block, sub-system, and full-chip verification

• Should have delivered multiple chips functioning to Specification.

• Identify and manage verification deliverables, milestones, and schedules.

• Proactively identify potential verification risks and develop mitigation strategies.

• Collaborate with design, architecture, and software teams to understand and verify design intent.

• Communicate verification progress, issues, and results to stakeholders and management.

• Strong in understanding multiple architectures, integrating 3rd party IPs/VIPs, and working with mixed-signal designs with low-power design and verification challenges

• Strong understanding/exposure to Design Verification for low-power battery-operated designs is highly desired.

• C-based verification in an SoC environment is required

• Experience with ARM processor-based designs and low-power design techniques is a plus.

• Languages: SystemVerilog (UVM), Verilog, C/C++, Python, Perl or Makefile

• Technologies: ARM M/RISC-V (Preferred), AMBA AXI/AHB/APS, DMA, Flow Control, Serial Devices, Qo5

• Preferred technologies: MIPI(CSI/DSI), Crypto, OTP, DSP, Low-Power

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Will be part of Operation & Support Team to support Project implementation and Maintenance.

The key responsibilities are as below:

Job Description:

Project:

• Support Project Team in Project implementation
• System setup, configuration and testing
• Perform any other duties as assigned.

Maintenance:

• Perform CUAS Preventive and Corrective maintenance works at restricted Areas.
• Provide support services in operation exercise.
• Perform functional check and/or repair on testers and unit under Test.
• Perform any other duties as assigned.

Requirements:

• NITEC / Higher NITEC / Diploma in Mechanical, Electronics or Computer Engineering
• Fresh graduate are welcome to apply
• Experience in Electronics, PCB-related, electrical & networking would be advantageous
• Able to work over the weekend and standby for fault call if required
• Able to interpret schematics, technical manual and drawings for maintenance works.
• Ability to use analytical skills and a "hands-on" person.
• Good interpersonal skills, proactive and work well with others.
• Possess class 3 driving license will be advantageous.

Interested candidates can click on 'Apply' or send updated resume to [email protected]

We are regret that only shortlisted candidates will be notify

About the team:

MediaTek’s Physical design team is responsible to implement top quality digital backend design for our advanced process chips which have billions of transistors. Passionate talent who are eager to join this fast-growing IC design industry and grow together with our passionate team are welcome to apply!

Job Description

• Working on 6nm and below advanced process project APR and Timing/PI sign-off
• Take the TOP and PM role for the complicated hierarchical chip (more than 20M inst plus 500+ macros)
• Take the Block or Block coordinator role for complex blocks
• Do early prediction for critical APR/Timing/PI issues

Job Requirements

• APR/Timing/PI hands-on/tapeout experience on complicated hierarchical chip
• TCL/Perl/Python/C/C++ programming skill
• Have advanced process(n6 or below) experience is a plus
• Excellent communication and team work spirit

Location: One North, Singapore

Important Note: This advertisement is meant to source suitable candidates for future openings for this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Job Scope:

• C# Development:
  • Develop web applications using C#, ASP.NET MVC, and .NET Core frameworks.
  • Apply MVC architecture principles to ensure clean, maintainable, and scalable solutions.
  • Implement secure and high-performance features in web applications.
• Web Application and API Development:
  • Design and maintain RESTful APIs for integration with web, mobile, and external platforms.
  • Optimize and troubleshoot existing APIs to ensure high performance and reliability.
• Mobile App Development:
  • Build cross-platform mobile applications using Flutter and Dart.
  • Ensure smooth integration between mobile apps and backend services.
  • Enhance mobile app performance and user experience through optimization techniques.
• Navision 365 Development:
  • Customize and extend Microsoft Dynamics 365 Business Central (Navision) to meet business needs.
  • Develop custom modules, workflows, and reports in Navision 365.
  • Troubleshoot and resolve Navision-related issues to ensure system reliability.
• Database Design and Management:
  • Design and optimize relational database schemas (e.g., SQL Server, MySQL)
  • Write efficient and secure database queries, stored procedures, and scripts.
• Testing and Quality Assurance:
  • Perform unit and integration testing to ensure code quality and functionality.
• Documentation:
  • Create/Maintain comprehensive technical and user documentation for developed solutions.

Requirement:

• Degree in Computer Science or related field
• Minimum of 2 years of professional development experience in C# and .NET technologies.
• Strong proficiency in C#, ASP.NET MVC, and .NET/ .NET Core.
• Experience with MVC architecture and building scalable web applications.
• Hands-on experience developing RESTful APIs and backend services.
• Knowledge in Flutter and Dart for cross-platform mobile app development.
• Knowledge in Microsoft Dynamics 365 Business Central (Navision) customization and integration.
• Solid knowledge of relational databases (e.g., SQL Server, MySQL, PostgreSQL).
• Familiarity with Git or other version control systems.
• Excellent problem-solving skills and attention to detail.
• Experience with cloud platforms such as Azure or AWS.
• Provide IT support/assistance in after-sales services.

Be a Part of Something BIG!

As a Senior Software Engineer in Core Engineering team, you will be responsible for building applications that run in the cloud or in the data centre to support both web and mobile apps. Using engineering best practices, the applications you build will be of the highest quality and confirm to development standards. The applications you write will be primarily written in the Java programming language with specialized services written in other languages such as JavaScript or Golang, Python, other. You will have a good understanding of building cloud-native applications on Kubernetes.

You will understand service implementation approaches that support consistent and eventually-consistent data models using synchronous and asynchronous techniques and understand the fundamentals of resource optimization and concurrency.

From time to time you will employ your technical experience in frameworks and databases to handle old code bases in order to transform legacy systems into cloud-native applications.

Make an Impact by:

• Development of High Performance Java Service API and Business Systems
• Using SpringBoot to build microsservices in Java
• Working with AWS Services to optimize your Java applications (SQS, SNS, SES, Lambda, S3, DynamoDB, RDS, and more)
• Contributing to common Java libraries, SDKs and Framework development
• Design database schemas and technical architecture
• Implement and following coding best practices and maintain high quality codebases
• Be a mentor for junior engineers

Skills for Success:

• BA in Computer Science or Computer Engineering
• 5-10 Years of experienced in Java 11+, SpringBoot, RESTFul Services, JSON API, Gradle, Linux, Kubernetes and AWS
• Understanding of Algorithmic Design
• Can work in small and large teams
• Ticking Systems
• Documentation Systems
• Testing Methodologies

Rewards that Go Beyond

• Full suite of health and wellness benefits
• Ongoing training and development programs
• Internal mobility opportunities

Your Career Growth Starts Here. Apply Now!

Supporting the Mechanical maintenance team, you will be responsible for the effective maintenance plant and equipment to achieve high reliability and availability in accordance with statutory, regulatory and safety requirement.

Responsibilities

• Perform scheduled plant inspection according to maintenance regime as well as ensuring that our gas plant, auxiliaries and common systems are maintained according to SOPs, and in compliance with regulations and requirements and in a safe manner.
• Coordination of all Mechanical Maintenance programmes (PM & CM)
• Manage and optimize all planned plant/equipment maintenance activities during minor and major overhauls and inspections.
• Responsible for the functional tests and analyse the failures related to mechanical systems and components and recommends corrective actions to prevent re-occurrence. Troubleshooting of faults/defects issues & carry out failure analysis.
• Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Execute approved plant improvement works
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Prepare technical specifications for equipment parts and work services. Manage the procurement of parts and services to meet the maintenance needs
• Track the year to date expenditure against the approved department budget
• Manage a team effectively through day-to-day activities.

Requirements

• Degree in Mechanical Engineering or equivalent recognized by the Professional Engineers Board.
• At least 5 years of relevant working experience in plant maintenance from the Power or Oil and Gas industries.
• Sound Mechanical engineering maintenance knowledge. Good knowledge of safety and statutory requirement will be an advantage.
• Self-motivated team player with analytical mind, strong planning and problem solving skills.
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

ob Responsibilities and Duties :

- Develop a deep understanding of design specifications based on customer requirements, , organizational goals, and business strategies. Conceptualize and develop solutions based on project requirements and Company standards through the use of simulations/modelling to support design concept used.

- Develop design specification sheet with relevant info related to the project and update as and when required and distribute to relevant parties.

- Carry out detailed cycle time study for individual modules to select the appropriate machine or module design. Develop 3D model of the machine and/or modules assigned with optimised design for manufacturing, cost, quality and safety.

- Initiate and carry out internal design reviews to share and explain the completed modules with other departments.

- Initiate and carry out design review with customer base on project schedule

- Revise design and documents based on both internal and external review·

- Create and update flow chart for the module or the entire machine

- Create part drawings and assembly drawings based on approved design and obtain approval from department manager

- Create Bill Of Materials (BOM) for the modules assigned based on design schedule given.

- Create drawing release file and send out drawings for quotation

- Send out standard part list for quotation based on BOM.

- Receive quotation and make price comparison spreadsheet

- Raise PR and get department manager approval and send to Purchase department for negotiation and ordering.

- Promptly support any design issues discovered during fabrication and /or assembly stages

- Make necessary modifications needed, update design, drawings and get approval from department manager.

- Release revised drawings to supplier and internal assembly team.

- Support machine assembly team as and when necessary, with set up and fine tuning of machines.

- Carry out all the activities based on the project schedule given.

- Meet quality standards while maintaining working knowledge of relevant technologies and best practices, and upholding company policies, internal, customer standards for machine building and safety.

- Develop, train, and educate junior engineers, guide technical direction, and act as a technical liaison between customers

The Reliability Engineering Automation team prides itself in keeping Visa systems up and secure, catering to the 24*7 needs of the business. The team uses AI to aggregate observational data (from monitoring systems output, job logs, syslog, etc.) and data from ticketing, incident, and event management system data to produce a virtuous circle of continuous insights yielding continuous improvements and fixes The Staff Software Engineer, a highly motivated senior experienced individual contributor, responsible for innovative planning, designing and developing effective solutions in accordance with industry standards on best web development practices. As part of the team, you will be required to own key modules, perform code and design AI architectural reviews, suggest best practices and implement design and development standards. The role is a senior consultant who has the passion to solve problems, factor old codes, learn and pick up new technologies like generative AI, chatops, LLM, Onprem models. Model QA. The role will also be required to lead implementations on key modules and mentor junior team members,

Responsibilities:

• Have the passion in developing and supporting the growth of the next generation software architectures and inspire innovation within the team
• Develop scalable real-time low-latency Artificial Intelligence processing solutions in an agile delivery method
• Lead and guide the team in AI design, code and implement new algorithms to solve complex problems
• Develop AIOPS solutions using available tools and technologies and assist the global team in problem resolution by hands-on participation.
• Engage technical workshops with cross-vertical Technology partners for cross-vertical integration in software development

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Our Client is a leader in the Manufacturing MNC. Due to their current expansion plan, they are looking for a Production Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibility:

• Responsible in production planning and control processes
• Handle manpower allocation/planning and participate in HR-related activities.
• Manage order processing and related documentation tasks.
• Work closely with Sales and Quality departments to resolve production issues.
• Track and monitor production schedules to meet delivery timelines.
• Prepare and submit detailed monthly production reports.
• Involve in process improvement initiatives.
• Any other ad-hoc duties as assigned.

Requirement:

• Minimum Diploma in Engineering related studies or equivalent
• Minimum 2 years relevant experience
• Proficient in Microsoft Office application

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

COMPANY DESCRIPTION

Singapore Management University is a place where high-level professionalism blends together with a healthy informality. The 'family-like' atmosphere among the SMU community fosters a culture where employees work, plan, organise and play together building a strong collegiality and morale within the university.

Our commitment to attract and retain talent is ongoing. We offer attractive benefits and welfare, competitive compensation packages, and generous professional development opportunities all to meet the work-life needs of our staff. No wonder, then, that SMU continues to be given numerous awards and recognition for its human resource excellence.

RESPONSIBILITIES

• To apply machine learning techniques to improve the accuracy of the inferencing system
• To select and analyze specific Android brand/model on their compatibility with the side-channel inferencing system
• To evaluate the performance overhead and accuracy of the inferencing system prototype

• Bachelor or Master Degree in Computer Science, Information Technology, Information Systems, Computer Engineering, or related disciplines
• Project experience in machine learning or Android security is a plus
• Good communication skills in English
• Advanced level of programming and software implementation, especially in C/C++ and Java
• Good understanding of existing machine learning techniques
• Good understanding of Android architecture and Android executables
• Good analytical, technical, and problem-solving skills
• Self-motivated and willing to work in a term

#LI-JN2

• MNC Company
• Basic $4500 - $6000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8am to 4.30pm

Job Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Basic Salary UP$4000 + Transport Allowance + Variable Bonus

• Company located at Tuas

• Monday – Friday: 8am – 5pm

• Well Established Oil & Gas Manufacturing Company

• Excellent Welfare & Benefits

Job Scope

• Assist the Production Manager and Machining Shop Manager in taking charge of all jobs whenever necessary and ensure delegation and coordination on the necessary works.
• Ensure that all budgets and plans are met.
• Assist the Production Manager and Machining Shop Manager to monitor and manage loadings, direct labour hours, overtime, rework, scrap, on time deliveries, downtime, work efficiencies and ensure all measurements are within plans whenever necessary.
• Organize weekly production meeting to provide status update to all relevant departments and iron out related production issues.
• Assist the Production Manager and Machining Shop Manager to formulate shop floor production plans and optimize production hours and weekly planned hours ensuring on time delivery.
• Assist the Production Manager and Machining Shop Manager to identify the skill level of production employees and distribute suitable work tasks to achieve higher throughput whenever necessary.
• Assist the Production Manager and Machining Shop Manager to conduct annual performance appraisal for all reporting employees whenever necessary.
• Assist the Production Manager and Machining Shop Manager in resolving bottleneck situations and determining root cause, corrections and corrective actions for internal rejection and scrap.
• Assist the Production Manager and Machining Shop Manager in initiating purchase requisition for any requirements and preparing monthly reports whenever necessary.

Requirement

• Diploma / Degree in Mechanical / Manufacturing Engineering or equivalent
• 1 - 3 years of relevant experience in metal machining or oil & gas industry

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

YEOW CHANG FU (R23118759)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Responsibilities:

• Responsible for the management of Site Reliability Engineering, have hands-on knowledge on manage & troubleshot server, network and applications;
• Responsible for the deployment and daily monitoring of the company's business systems to ensure the normal operation and emergency response;
• Provide in-depth understanding of the operation and maintenance architecture, good at architecture design, performance optimization, platform security; Responsible for the improvement of the operation and maintenance team skills, to ensure the professional level of the operation and maintenance team.
• Establish and improve standardized operation systems for DevOps team. Use a sound management strategies and security strategies to ensure the quality of operation and maintenance;

Job Requirements:

• Familiar with automation deployment, proficient in how to build the most of popular monitoring system in the market. SVN/Git version control system and proficient in CICD configuration;
• Hands-on knowledge in Nginx configuration, Load balancer (SLB) configuration. Familiar with Node.js running environment will be an advantage.
• Skilled in managing Linux systems and security, with experience in operation and maintenance of large websites or web application platforms;
• Understand common knowledge about the network, familiar with firewall, VPN, DHCP, DNS and other network technologies. Familiar with high availability/load balancing technology will be an advantage;
• High sense of responsibility, strong ability to analyze and eliminate faults, good at learning at work, able to withstand work stress;
• Understand the penetration test, have experience in safe operation and maintenance, and have working experience in Cloud platforms (AZURE, AWS or Google);
• Working Environments: Hyper-Cloud, Cloudform/AWX, ELK, Zabbix, Jenkins/VSTS, GitLab etc. We build together, We learn together.
• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Computer/Telecommunication), Engineering (Electrical/Electronic), Computer Science/Information Technology or equivalent.
• At least 3 years of working experience in the related field is required for senior position.
• Preferably Senior Executive specialized in IT/Computer - Network/System/Database Admin or equivalent.

What we offer:

• Proper training will provide to the senior position
• Attractive rewards for long-term service staff
• Energetic and friendly working environment (flexible working hours, quarterly events, staff birthday celebration and etc.)
• Medical insurance

Job Responsibilities:

• Responsible for the management of Site Reliability Engineering, have hands-on knowledge on manage & troubleshot server, network and applications;
• Responsible for the deployment and daily monitoring of the company's business systems to ensure the normal operation and emergency response;
• Provide in-depth understanding of the operation and maintenance architecture, good at architecture design, performance optimization, platform security; Responsible for the improvement of the operation and maintenance team skills, to ensure the professional level of the operation and maintenance team.

Job Requirements:

• Familiar with automation deployment, proficient in how to build the most of popular monitoring system in the market. SVN/Git version control system and proficient in CICD configuration;
• Hands-on knowledge in Nginx configuration, Load balancer (SLB) configuration. Familiar with the Node.js running environment will be an advantage.
• Skilled in managing Linux systems and security, with experience in operation and maintenance of large websites or web application platforms will be an advantage;
• Understand common knowledge about the network, familiar with firewall, VPN, DHCP, DNS and other network technologies. Familiar with high availability/load balancing technology will be an advantage;
• High sense of responsibility, strong ability to analyze and eliminate faults, good at learning at work, able to withstand work stress;
• Understand the penetration test, have experience in safe operation and maintenance and have working experience in AZURE, AWS or Google Cloud platforms;
• Working Environment: Hyper-Cloud, Cloudform/AWX, ELK, Zabbix, Jenkins/VSTS, GitLab etc. We build together, We learn together.
• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Computer/Telecommunication), Engineering (Electrical/Electronic), Computer Science/Information Technology or equivalent.
• At least 1 years of working experience in the related field is required for junior position.

What we offer:

• Proper training will provide to the junior position.
• Attractive rewards for long-term service staff
• Energetic and friendly working environment (flexible working hours, quarterly events, staff birthday celebration and etc.)
• Medical insurance

Netpoleon Solutions is a well-established IT Network Security solutions provider and the Asia arm subsidiary of Macnica Inc – a Global Company with trillion-yen revenue.

Netpoleon Solutions has offices in Singapore, Malaysia, Indonesia, Philippines, Thailand, Vietnam, Myanmar, India, Australia and New Zealand, with its parent Company based in Japan.

We are now inviting individuals to join the Singapore office. Candidate applying should have a strong analytical mind and possess excellent cybersecurity skills and knowledge. If you have these qualities, you will embark on an exciting career together with us to pursue our strategic expansion.

Job Responsibilities:

• Deploy and provide professional services: This includes, but is not limited to, the implementation and upgrading of Cybersecurity products that Netpoleon distributes. Occasionally, this will involve managing customers and timelines.
• Provide workable solutions: Offer solutions (or alternatives) based on customers’ requirements.
• Conduct product training: Provide training on our products to customers, partners, and internal teams.
• Perform installations and configurations: Carry out installations and configurations independently using product manuals.
• Upskill and certification: You will upskill and obtain technical certifications for the products or technologies you handle, as applicable.
• Subject matter expertise: Over time, become a subject matter expert to assist in transferring domain knowledge and technical skills to our maintenance team to better support our customers.
• Technical assistance: Support the sales and support teams in technical matters, such as product feature clarification, implementation considerations, tender compliance, and other ad-hoc situations.

Job Requirements:

• Positive and professional working attitude.
• Ability to work both independently and as part of a team.
• Capable of handling stress, meeting tight deadlines, and thriving in a fast-paced environment.
• Nitec/Higher Nitec certificate, Diploma or Degree in IT, IS, Cyber Security, or related fields.
• Minimum 2 years of work experience in IT, IS, Cybersecurity preferred. Candidates without relevant work experience may be considered for an Associate Engineer position.
• Strong understanding of technology infrastructures such as Firewalls, VPN, DLP, IDS/IPS, Web-Proxy, DNS, Email Security, Log Management, SIEM, Virtualization, Containers, AWS, Azure, Google cloud, DevOps/DevSecOps, Privilege Account Security, Identify Access Management, Endpoint Security, CyberArk Conjur.
• Proficiency in troubleshooting various technologies, network, and system issues including routing, NAT, VLAN, Multicast, TCP/IP, OSPF, BGP, AD, LDAP, RADIUS, SNMP, Syslog, SMTP, TLS, SSH.
• Demonstrate a strong interest in staying updated on cybersecurity trends and hacking techniques.
• Preference will be given to candidates with certifications such as Cisco CCNA/CCNP, Check Point CCSE/CCSM, Thales, CyberArk CDE, Trellix, ArcSight ESM/Logger, ITOM, SailPoint, CISSP, CREST, OSCP.
• Proficiency in programming language like Python, C++, Java, JavaScript, Ruby, Bash scripting, and Power Shell is advantageous.
• Compliance with Company Information Security Standards.

Other Information:

• Working hours: 9am to 6pm, Monday to Friday*
• Salary will commensurate with qualifications and experiences
• 13th month AWS / Variable bonus
• Training consisting of in-house and vendor-led will be provided. Additional sponsored training available to confirmed staffs subject to performance assessment.
• This position is suitable for individuals with a strong technical background and professional experience, aiming to transition into a senior technical role at our Singapore office in the future.

*Expected to work on after office hours, Sat/Sun/Holidays when required by customers.

Interested candidates, please apply via the “Apply Now” button below.

We regret that only shortlisted candidates will be notified.

[Job ID:765937]

Role Objectives:

• The successful candidate will be a crucial part of our team, using their expertise in IT security to manage and maintain systems for not only our company but also our group companies.
• The role is not limited to security support but includes account management and technical support for clients and vendors.
• With a strong grasp of our cloud-based infrastructure tools, the candidate will be fundamental in providing continuous technical support to clients and internal teams within the APAC region.

Responsibilities :

• Implement and maintain security configuration across our IT infrastructure (including M365, Google Workspaces, ClickUp, Bitbucket, and etc.)
• Guide IT managers of the group companies per the headquarters' directive.
• Effectively manage and analyze system logs on an ongoing basis.
• Remain updated about the latest security vulnerabilities and take immediate action if necessary.
• Collaborate with internal and external parties to ensure secure, smooth operations.
• Handle client inquiries about our proprietary applications.
• Automate redundant tasks using programming language skills.
• Regularly monitor and maintain system metrics dashboard and alerts.
• Educate colleagues and enhance company documentation about our IT infrastructure.
• Collaborate closely with the Tech department at Japan HQ.
• Any other ad-hoc duties assigned

Requirements:
[MUST]

• At least 5 years of extensive experience in IT-related fields.
• Proficient reading and writing skills in Japanese for liaising with Japanese speaking counterparts.
• Exceptionally good communication and interpersonal skills.
• Clear knowledge of AWS, Azure(Entra), and/or GCP Services, relating to software development.
• Strong ability to configure SIEM and Power BI tools.
• In-depth familiarization with account management and data security.
• Experience in creating, monitoring and responding to security events.

[ADVANTAGE]

• Proficiency in additional languages such as Chinese, Malay, or Thai for liaising with Chinese/Malay/Thai speaking counterparts.
• Proven experience with Cyber Incident Response Plan (CIRP).
• Expertise in vulnerability management, penetration testing, and implementing security incident response processes.
• Extensive experience in developing, implementing, and maintaining security policies.
• Knowledge of network security design and implementation.
• Experience in using vulnerability scanning tools and security tools.
• Proven record of enhancing cloud security through policy implementation and monitoring.
• Experience in promoting social engineering and phishing countermeasures.
• Ability to provide in-house security training.
• Professional security-related certifications such as CISSP, CISM, CEH are highly desirable.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference: https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Ochi Madoka
EA Personnel Registration Number: R24125474
EA License No.: 07C5771

Want to build new features and improve existing products that more than a billion people around the world use? Are you interested in working on highly impactful technical challenges to help the world be more open and connected? Want to solve unique, large-scale, highly complex technical problems? Our development cycle is extremely fast, and we've built tools to keep it that way. It's common to write code and have it running live on the site just hours later. We push code to the site continuously and have small teams that build products that are touched by millions of people around the world. If you work for us, you will be able to make an impact immediately.


Meta is seeking Software Engineers to join our engineering team. You can help build the next-generation of systems behind Meta's products, create web applications that reach millions of people, build high volume servers and be a part of a team that’s working to help people connect with each other around the globe.

Responsibilities

• Develop a strong understanding of relevant product area, codebase, and/or systems
• Demonstrate proficiency in data analysis, programming and software engineering
• Produce high quality code with good test coverage, using modern abstractions and frameworks
• Work independently, use available resources to get unblocked, and complete tasks on-schedule by exercising strong judgment and problem solving skills
• Master Meta’s development standards from developing to releasing code in order to take on tasks and projects with increasing levels of complexity
• Actively seek and give feedback in alignment with Meta’s Performance Philosophy Preferred qualifications

Minimum Qualifications

• Currently has, or is in the process of obtaining a Bachelor's degree in Computer Science, Computer Engineering, relevant technical field, or equivalent practical experience. Degree must be completed prior to joining Meta
• Experience coding in an industry-standard language (e.g. Java, Python, C++, JavaScript)
• Experience in building large-scale applications

Preferred Qualifications

• Demonstrated software engineering experience from previous internship, work experience, coding competitions, or publications
• Currently has, or is in the process of obtaining, a Bachelors or Masters degree in Computer Science or a related field

Meta builds technologies that help people connect, find communities, and grow businesses. When Facebook launched in 2004, it changed the way people connect. Apps like Messenger, Instagram and WhatsApp further empowered billions around the world. Now, Meta is moving beyond 2D screens toward immersive experiences like augmented and virtual reality to help build the next evolution in social technology. People who choose to build their careers by building with us at Meta help shape a future that will take us beyond what digital connection makes possible today—beyond the constraints of screens, the limits of distance, and even the rules of physics.

Our client is from Medical industry. They are looking for a Software Engineer to assist their team for the next phase of their business. They are located in Central - easily assessable.

Duties Software QA Engineer:

• Verify user applications and server-side components to meet requirements and specifications discreetly.
• Execute Unit, Regression, Integration, Performance, and System Tests confidentially.
• Collaborate with developers to resolve issues arising from test procedures and results while maintaining confidentiality.
• Take ownership of assigned modules and projects discreetly.
• Manage defect tracking and implement solutions confidentially.
• Update tasks in OpenProject privately.
• Maintain and backup databases as needed, ensuring data security discreetly.
• Participate in software design reviews and create confidential test reports for releases.
• Review software documentation for technical accuracy while maintaining confidentiality.

Requirements:

• Diploma/ Degree in IT or Computer Science.
• Min 3 years of working experience in relevant industry
• Experience in SQL, JENKINS and TestComplete

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.