Responsibilities:

· Execute field service activities per Company procedures and general practices of safety and cost-effectiveness.

· Perform basic troubleshooting, running tests, fine-tuning, adjustments, and trimming related to running performance on equipment.

· Independently perform significant/complex repairs and complete overhauls.

· Perform warranty and commissioning activities, delivering the equipment to the customer or a shipyard.

· Perform internal and external progress status reports of assigned work.

· Participate in briefings and debriefing for each service mission

· Create Service Work Reports.

· Collect and organize time sheets and expense reports. Report and inform the back office as required.

· Ensure the work is executed according to Company Quality, Health, Safety, and Environmental guidelines and customer site procedures.

· Issue WeCare and Non-Conformance Reports when appropriate to ensure "lesson learned" from experiences gained at service missions

· Execute Client Survey after each job

· Supervise the tasks performed by Company employees and subcontractors.

· Advice and promote company products and solutions to customers.

· Participate in other department work as directed by the Line manager.

Requirements:

· Bachelor degree in Process, Automation, Mechanical, Marine, Electronics, or Mechatronic Engineering

· 3-5 years hands-on experience in process and electrical & Automation disciplines

· Knowledge or Experience in LPG/LNG/VOC/IG, Flare Gas systems, and Renewable & General Gas handling would be considered as advantage

Responsibilities and Tasks
• Provide engineering study is to include good design practice for state-of-the-art system designs, system capacity and capability analysis, planning for future requirements, as well as code compliance.
• Maintain engineering data bases in support of capacity tracking, capital equipment facilitation, and cash flow project management for assigned systems/areas.
• Provide support for start-up of new equipment and ensure that all equipment will properly interface to other mechanical and electrical systems.
• Specify critical components for design projects and is responsible for assuring designs meet all applicable codes and regulations. The applicable code review and analysis utilizing (but not limited to): IFC, IBC, NEC, NFPA, FM, CGA and Semi standards. This requires continual review and analysis of new and existing equipment, applications, and technology.
• Perform engineering study on emerging facilities technologies to support cutting edge semiconductor processes.
• Participate in mid to long term infrastructure planning for facilities in support of the overall company plan.
• Work with in-house TGCM contractor and ensure chemical and Gas Delivery system running smoothly.
• Review and improve Operation and Maintenance SOP and RA.
• Respond to system issues. Perform Trouble Shooting with in-house TGCM contactors and OEMs.
• Verify all works done by Chemical and Gas section are in accordance with company safety guidelines;
ensure safety features are engineered into designs; and maintain good communication with other engineering disciplines and customers throughout the organization.
• All team members are required to complete their learning items within the stipulated time frame.

For business process and/or QMS component that one is responsible or accountable for:
a. ensuring the QMS/business process that is effective and conforms to requirements.
b. ensuring that the processes are delivering their intended outputs.
c. reporting on QMS/business process performance and opportunities for improvement to management.
d. ensuring the promotion of internal and external customer focus throughout the organization.
e. ensuring the maintenance of the integrity of the QMS/ business process when changes are planned and implemented.
f. ensuring customer requirements are met.

• Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws
and regulations.
• Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings.
• Prepares bid sheets and contracts for construction and facilities acquisition.
• Reviews and estimates design costs including equipment, installation, labor, materials,preparation and other related costs.
• Inspects construction and installation progress for conformance to established drawings, specifications, and schedules.
• Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Education

• Bachelor’s degree in Chemical Engineering or equivalent discipline.

Skills, Knowledge and Abilities

• Good team work and collaboration

• Excellent communication and presentation skills

• Strong problem solving and analytical skills

• Independent and able to work on own initiative

• Good organizational skills and ability to prioritize and schedule workload

• Good knowledge of Microsoft Office

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Our client provides advanced instruments and systems designed for high performance across various industries.

• Connect with prospective clients to provide tailored semiconductor solutions.
• Manage the entire sales process, from prospecting to after-sales support.
• Liaise with global teams and R&D to tailor solutions to customer needs.
• Drive growth by exploring industry trends and opportunities in the SEA market.
  Foster and sustain strong client partnerships.

Requirements:

• Degree in Materials Science or equivalent.
• At least 2 years of sales experience in the Metrology/Scientific Industry.
• Good understanding of semiconductor processes for laboratory equipment uses for failure analysis, quality control and metrology equipment for thin film.
• Excellent communication, negotiation, and customer relationship skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Purpose: Responsible for establishing process steps to produce in-house-made parts and meet customer expectations concerning quality, lead time, cost, and technological needs. Process Engineer drives improvements in process methods to enhance performance and output.

Key Area of Responsibilities:

• Establish process steps to produce in-house-made parts and meet customer expectations in terms of quality, lead time, cost, and technological needs, without compromising health and safety.
• Create process routing (work instructions) & BOM in BaaN, and prepare an Inspection Method Sheet (IMS)/checklist.
• Read and interpret 2D drawing, 3D model and customer specifications on drawing.
• Ensure process routing is ready for both the first article and volume production.
• Perform sustaining engineering work (documentation of the process, optimization of resources, support production team, resolving technical/quality issues).
• Monitor process performance (quality, cost, lead time) and yield using tools (e.g.: SPC).
• Monitor First Article (FA) progress and resolve technical issues in a timely manner to ensure smooth production flow from FA to volume production.
• Drive improvements to process methods to enhance performance and output.
• Take accountability in leading special projects and processes, treating it like a specialist in the identified process assigned by a superior.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 3 years of working experience in the precision machining industry.
• Strong knowledge of manufacturing processes
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Problem Solving and Continuous Improvement

Duties and Responsibilities

• Develop web application prototypes, new technologies and products.
• Build highly responsive and scalable web applications.
• Build fully functional web applications with interfaces to backend database, writing clean and maintainable code.
• Build fully functional, clear, testable backend RESTful/SOAP APIs with interfaces to backend database.
• Resolve defects, and generally ensure accuracy, integrity, interoperability and completeness of system.
• Build regularly automated tasks to perform functions specific to the project requirements.
• Build interfaces to exchange data between various third-party systems.
• Resolve defects, and generally ensure accuracy, integrity, inter-operability and completeness of system.
• Troubleshoot and debug to optimize performance.
• Prepare and deliver software related documentation.
• Provide timely updates to the web and backend application.
• Provide support and maintenance of existing software web application projects.
• Respond to users in a timely manner.
• Work with fellow software engineers to coordinate the development effort and ensure overall consistency in the coding and the interfacing between various components and sub-systems in order to achieve a full functioning solution.
• Work with consultants to craft user stories, assess feasibility and build demonstration showcases.
• Work with consultants and senior engineers to develop test scenarios to ensure full functionality of system before user acceptance test.
• Work with customers and partners, both internal and external where there will be collaboration for knowledge transfer.

Essential Skills and Experience

• At least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma or Professional Degree in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.
• Fresh graduate, or up to 2 years of relevant working experience
• Tech Stack Requirements: ASP.NET Framework 4.5 or .NET Core, C#, HTML, CSS, Javascript, SQL Server
• Good problem solving, logical reasoning, planning and time management skills
• Effective communication and technical writing skills
• Strong interest in software engineering
• Willingness to learn on the job, and constantly eager to learn new skills on one’s own
• Ability to work well in teams and also independently in a fast-paced environment
• Familiarity with mobile application development (with Xamarin) is a plus.
• Familiarity with backend API development (with .NET technologies) is a plus.
• Domain knowledge in accounting, or procurement, or inventory management, or leasing, or computerized maintenance management, or billing, or resource booking, or Enterprise Resource Planning is a plus

Only shortlisted candidates will be notified

Overview:

This is an opportunity to directly work in a health services sector as an Application Support Engineer (System Analyst).

Responsibilities:

• Provide level 2 application support, liaise with level 1 and level 3 support teams within the company and other organizations to resolve incidents and recover service.
• Provide 24/7 primary application maintenance and support.
• Work with level 3 support teams to fulfill service requests and change requests.
• Document and track incidents, service requests, change requests and provide regular progress updates.
• Coordinate closely with support teams to test and deploy defect fixes, enhancements and patches to production environment.
• Lead and coordinate regular system maintenance and upgrade activities such as monthly maintenance, patching and hotfix deployments.
• Review and update project documentation and processes.
• Work with procurement team and vendors to procure necessary software and services.

Requirements:

• Must have Degree in Computer Science, Computer Engineering or equivalent.
• At least 1 year experience in application support and operations.
• Good understanding of IT technologies, methodologies and processes including SDLC and Agile.
• Experience in application support and maintenance for mobile applications and web portals.
• Good track record in managing business users and working with other support teams.
• Strong analytical skills and ability to work independently.
• Experience in healthcare industry is an added advantage.

Morgan McKinley Pte Ltd

Cedric Ferreras

EA Licence No: 11C5502

EA Registration No. R1870889

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Test Engineer

Our reputable client is looking for a System Test Engineer Lead (Selenium) to handle test plan, design, planning and setting up Test Lab. The incumbent is required to lead Installation, checkout, integration and testing (ICIT) at customer’s sites.

Responsibilities:

• Involved in System Test Plan and System Engineering Design.
• Responsible for Planning and Setting up Test Lab and conduct Factory Acceptance Test.
• The ability to perform Troubleshooting and Resolving System Faults and Perform On-Site Acceptance Test.
• Involved in lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

• Strong in performing System Test and Design.
• Strong knowledge in handling Infocomm Technology, RedHat Linux, Virtual Environment, Network Security.
• Experience in handling System Test Plalnning and Troubleshooting.
• Minimum 5 years of System Test experience using Selenium.
• Experience in leading a Team of Engineers.
• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Singaporeans Only.

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to : [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

• Design, build, and maintain CI/CD pipelines using various CI/CD platforms to streamline cloud deployments.

• Integrate automation solutions across applications to enhance operational efficiency.

• Ensure best practices and security are prioritized when developing CI/CD pipelines.

• Continuously improve operational workflows through task automation.

• Collaborate with subject matter experts to ensure automation solutions meet business requirements.

• Act as an innovative, hands-on DevOps engineer, focusing on both the technological and strategic aspects of the platform.

• Proven experience with Kubernetes and containerization technologies.

• Strong understanding about DevOps and DevSecOps terminology.

• Proficiency in automation tools such as Jenkins, GitLab Runner, AWS Lambda, AWS CodePipeline, and AWS CodeBuild.

• Hands-on experience with Infrastructure as Code (IaC) tools like Terraform and CloudFormation.

• Management configuration tool like Ansible, Puppet.

• Familiarity with scripting languages such as Python, Bash, and PowerShell.

• Experience working in multi-cloud environments, including AWS, Azure and GCP

Job Responsibilities:

• Develop and deploy machine learning models: Design, build, optimize, and deploy machine learning models to address business challenges.
• Collaborate with cross-functional teams to define objectives and integrate models into production systems.
• Model training and evaluation: Train and fine-tune models using advanced algorithms, ensuring optimal performance through techniques like cross-validation and hyperparameter optimization.
• Model deployment and integration: Work with software engineers and DevOps to deploy models, implement APIs, and integrate solutions into existing applications for real-time decision-making.
• Performance monitoring and maintenance: Continuously monitor, refine, and enhance model performance, addressing anomalies and incorporating user feedback.
• Data analysis and insights: Conduct exploratory data analysis, generate insights, and present findings using statistical and visualization techniques.
• Stay up-to-date with the latest advancements: Stay updated with advancements in machine learning and AI, recommending tools and methodologies to improve workflows.

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Data Science, Machine Learning, or equivalent experience.
• Minimum 2 years’ experience in a similar role, with hands-on expertise in designing, developing, and deploying machine learning models.
• Strong knowledge of machine learning algorithms, techniques, and libraries (e.g., TensorFlow, PyTorch, scikit-learn).
• Experience with Large Language Models and Generative AI is a plus.

Technical skills:

• Proficiency in Python and machine learning frameworks (e.g., TensorFlow, PyTorch, Scikit-Learn).
• Strong foundation in statistical analysis, probability, and hypothesis testing.
• Familiarity with cloud-based machine learning tools (AWS, Azure, GCP) and distributed computing frameworks (e.g., Spark) is a plus.
• Analytical mindset with the ability to solve complex problems and develop innovative solutions.
• Excellent communication skills for conveying technical concepts to diverse audiences.
• Proven teamwork and multitasking capabilities.
• Adaptable and committed to continuous learning, with a focus on staying updated on advancements in machine learning and AI.
  

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

• Exposure to latest technologies
• On the job training

About the company
Our Client is an established company within their industry. They have a well-established presence of more than 10 years. With rapid expansion plan, they are now looking for an IT Engineer / IT Specialist (System & Networks) to join their team.

About the job
Reporting to the IT Manager, your role involves:

• Providing technical support (Computer, printer, mobile device and etc) to users
• Handling networks (Routers, switches, VoIP)
• Supporting and maintaining the Windows Servers and Office 365
• Managing Active Directory (Print Servers, Backup and etc)
• Handling disaster recovery planning
• Managing external vendors, ensuring SLA is being adhered to

Skills and experience required
As a successful applicant, you will have at least 2 years of experience in IT Support. Exposure to IT networks or system will be of added advantage.

Candidates with proven track record in Office 365 / O365 will be of added advantage.

Whats on offer
This is an excellent opportunity to join an established end user environment with on the job training

To apply online please use the 'apply' function, alternatively you can reach me at https://www.linkedin.com/in/hoonteck-nologyrecruitment. (EA: 94C3609/ R1219669)

Salary: Up to $8000

Duration: 6 months (start immediately)

Location: Kranji

Working Hours: Mondays to Fridays, office hours

Responsibilities:

• Ensures that the system in its totality (hardware, controls, sequence of operation) are fit-for-purpose and aligned with the business needs

• Support/Lead for the timing and strategy of process improvements and change controls

• Lead Quality Event (Deviation) process for Process Engineering and ensure timely creation, analysis and closure of events.

• Lead Change Control for Process Engineering and ensure timely creation, implementation and closure

• Responsible for Functional Specification Management.

• Provide support for weekly Plant Change Management meeting.

• Participate as Process Engineering representative on cross functional support team meetings.

• Primary liaison for engineering for RCAs and investigations (pulls in Process System & automation engineering as appropriate)

• Responsible for process safety assessments and hazard identification.

• Primary liaison for engineering for process FMEAs. Defines equipment operating ranges and ensures is aligned with process / product need

• Liaise with global engineering function to provide feedback on proposed and existing engineering standards and implement these as appropriate within the facility

• Target Delivery of results right first time

• Trouble shoots and resolves technical equipment problems and takes corrective action

• Timely closure of EHS and Quality event investigation and corrective & preventive action tasks.

• Lead CAPEX Project for Process Engineering and ensure timely implementation and closure

• Provide support for project teams for any new projects, makes recommendations based on experience

• Provide support for the evaluation and assist in the implementation of new technology for process execution and/or analysis

• Completes all required documentation for proper traceability complying with Takeda requirements

• Provide training to the end user on relevant technical aspects of installed plant assets

• Responsibility to adhere to any applicable EHS requirements.

• Commitment to a fair and respectful relationship to others and behavior in accordance with Company’s Code of Conduct.

• Any other duties as assigned by supervisor.

Requirements:

• Minimum Degree in Chemical/Bio/Process/Mechanical engineering discipline

• Minimum 4 years of process engineering experience in Biologics, Pharmaceuticals and/or similar manufacturing industries

• Experience in bio-processing engineering in a manufacturing environment is highly desirable

• Knowledge of unit operations associated with cell culture and downstream processing including: media and buffer preparation, bioreactors, depth filtration, sterile filtration, single-use technologies and chromatography skids & columns

• Experience in the design and operation of biopharmaceutical manufacturing equipment and facilities.

• Detailed knowledge of ASME Bioprocessing Equipment (BPE) guidelines

• Experience in a GMP environment is preferred

• Management experience within a multi-disciplinary team is an added advantage

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

• Well Established Company
• Basic $5500 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 3 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Mechanical Engineer

Salary: $4500 - $5500

Working Hours: Mon to Fri (8 am to 4.30pm)

Working Location: Jurong Island (Company transport provided near Jurong East MRT)

Maintenance Engineer (Mechanical) reports to the Senior Technical
Manager and whose responsibilities include:

• Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of:
• (a) daily maintenance [preventive, corrective, & breakdown maintenance],
• (b) transition maintenance,
• (c) turnaround maintenance and
• (d) upgrading and improvement related to maintenance
• Ensure all mechanical maintenance activities are carried out in accordance to the Company’s HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.
• Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability objective.
• Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.
• Conduct root cause analysis to eliminate equipment/ system defect and take appropriate preventive/ corrective measures.
• Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.

Requirements:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant.

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Your Role
We are looking for an experienced Sales Engineer (Laboratory/ Electronic Testing) / Sales Executive (Cleaning Equipemts) to develop & identify business opportunities including sales visits, preparation of proposals, products & proposals presentation, contracts negotiation and closing of sales.

What Will You Do

• To develop and identify business opportunities
• To do sales visits, preparation of proposals & closing of sales
• To develop sales strategies for the growth of existing and new accounts
• To market wide range of products and provide customers with solutions
• To meet sales quota set and participate in yearly and periodic budget exercises.

What Do We Want

• At least Diploma/ Degree in Electronic/ Telecommunication / Engineering in relevant fields
• Min 1-2 years of relevant work experience in electronic testing / laboratory fields
• And have electrical control circuits, hydraulic system, electrical diagram working experinces
• Possess own transport will be advantage.
• Willing to travel.

What Will You Get In Return
You will be given exposure to a hold a key position in a growing organization with attractive rewards and a wide range of benefits. You will entitle a Gross salary up to S$3500 + attractive perks.

What You Need to do Now
Click "Apply" and please include the following information in your resume:

• Personal Particulars with recent photograph
• Education background
• Work experiences in point forms
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

Note:
Only shortlisted candidate will be notified via email for an interview invitation

We are seeking a business and sales solutions engineer for our client ST Engineering.

International Business Sales & Solutions Engineer

Responsibilities

• Understand customer demands, challenges, and objectives through assessments, information gathering and Customers, technology/industrial engagements

• Collaboration with sales & business development, product & engineering stakeholders including analyse and selection of appropriate hardware, software, and services to create the winning solution offering to customer and markets

• Developing detailed proposals, presentations, and technical documentation that outline the proposed solutions, including features, benefits, and pricing. Presenting these proposals to customers in a clear and compelling manner

• Preparation and conduct of product and solution exhibitions, demonstrations and proof-of-concept activities to showcase the capabilities and address any technical questions or concerns from customers

• Providing technical expertise and support to business development & sales team throughout the sales cycle, including participating in customer meetings, responding to technical queries, and contributing to the development of sales strategies

• Building and maintaining relationships with technology vendors and partners to stay informed about the latest products, technologies, and industry trends. This includes evaluating new solutions and incorporating them into proposed designs

• Keeping up-to-date with advancements in communication technologies, industry standards, and best practices. Pursuing opportunities to enhance technical skills and knowledge

Requirements

• Degree in Electrical/Electronics/Communications Engineering

• Minimum 5 years’ experience in Communications/Telecommunications/Infosystems Solutions Engineering and Implementations, supporting as a Pre-Sales capacity

• Strong understanding of communications technology

• Able to follow up closely with customers in order to answer to their needs

• Working location is in Jurong East

• Singaporeans Only

Please click apply, or submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

Goh Kwan Way Marc

EA License No : 06C4642

EA Reg No : R24120754

We regret that only shortlisted candidates will be notified.

SOFTWARE ENGINEER (AGV)

Company Background:

One of Asia Pacific's market leader in intelligent warehousing solutions.

Location: West (Benoi)

Working Hours: 5 Days Work Week (Mon-Fri - 8.30am to 5.30pm)

Benefits:

• Basic up to S$ 6000
• Performance Bonus (~3 months)
• Flexi Dollars S$ 800

Responsibilities:

Incumbent will be in charge of mainly 3 entities

• To develop and maintain Warehouse Control System (WCS) application.
• Development of REST API endpoints for interfacing with external and internal stakeholders
• Design and documentation of REST APIs
• Development of REST API interfaces and implementing REST API logic
• Database integrations for persisting REST API data
• Testing of REST APIs
• Development of internal APIs for interfacing with internal components
• Writing documentation for internal API interfaces
• Development of internal API interfaces and implementing internal API logic
• Testing of internal APIs
• Assist with software deployment and testing in customer site.
• Supporting deployment of WCS system on customer’s premises
• Handling integrations with additional systems
• Deployment and testing of the system
• Involve in DevOps related tasks

Job Requirements:

• Minimum Bachelor's Degree in computer science, computer engineering, information technology or a and relevant practical experience
• Software skills required: Python, Docker, Git, REST API

Please be notified that only shortlisted candidates will be notified.

Ian Fong | R22106545

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Summary:

• Basic up to 6k +
• Yearly performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in Solidworks
• Familiar with CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in Solidworks & CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Location: Admirax St
Working Days: 5 Day A Week
Working hours : 9:00am - 6:00pm
Salary : $5000 - $8000

Job Summary:

We are seeking an experienced Software Engineer to join our team, responsible for
designing, developing, and maintaining software applications for vision systems.

Responsibilities:

• Design and develop PC based automated visual inspection systems for our full range of semiconductor equipment.
• Evaluate and feasibility study on the customer’s vision specifications.
• Responsible to integrate any new vision hardware (camera, frame grabber, etc) onto the vision software.
• Troubleshooting and improve the processing time of the inspection.
• Provide technical support to internal and external customers to fulfill the inspection requirements. Change the vision inspection algorithm to improve the inspection capabilities and its performance.
• Be the key driver for continuous improvement plans for new and existing inspection capabilities.
• Coordinate with customer for any new enquiry with sale personnel if needed.
• Work closely with the vision application and optics team members to produce the best inspection result.
• Build and nurture a culture in engineering organization of harmony, quality, ownership, collaboration, continuous improvement and data-driven decision making.

Requirements:

• BS Science Diploma or higher in electrical and electronic, mechanical, or mechatronics engineering or related technical discipline or equivalent practical.
• Technical troubleshooting experience.
• Minimum 3 years in related field.
• Relevant technical work experience including automation machine system troubleshooting.
• Experience working with end customers.
• Understanding semi-conductor manufacturing process, vision inspection settings, machine software settings and configuration or equivalent practical experience.
• At least 3+ years of experience in software development with C#, WPF, Image Processing , Halcon (bonus)

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

Sales Engineer / Sales Specialist | 5 Days | Ubi

(Barcode and Office Automation solutions)

Working Day: Monday – Friday (8.30am – 6pm)
Working location: Ubi
Salary: SGD 2,200 – SGD 2,500 + Commission + Allowance

Job Description:

• Active canvasing for new customer base
• Achievement of agreed upon sales targets and outcomes within schedule
• Pre-sales activities to ensure healthy pipeline and good closure rate, with post-sales activities occasionally according to sales requirement
• Performance of sales cycle which includes sales quotation, order confirmation, purchase requisition, delivery (urgent case), installation (occasionally), payment collection

Requirements:

• Basic IT knowledge in Tele-Communication, Excel, PowerPoint
• Polytechnic Diploma - Electrical & Electronics Engineering is preferably.
• IT Solution selling and experiences in Electronics, Transport, Logistics, Aerospace, Hospitality industries is preferable.

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

• Location: Penjuru lane ( Transport provided at Jurong East)
• Monday to Friday: 8:00 AM – 5:00 PM
• Saturday: 8:00 AM – 12:00 PM
• Salary: $3,300 - $4,000

Responsibilities:

• Manage day-to-day operations and coordination of afloat repairs, load testing & inspection services on ships in Singapore and the region.
• Assist Service Manager in handling the company’s field service operations, in technical, operational and commercial matters
• Prepare quotations, costing for invoice, tools & equipment lists and procurement of parts.
• Manage and coordinate service job execution.
• Liaise with our customers, such as Ship Managers, Offshore Operators, Shipyards, Agents and others
• Manage the tools & equipment which are kept at our warehouse. Send for recertification periodically as required.
• Coordinate with Ship Agents, Ports & Ship Yards, handle permits and schedule service attendances.
• Coordinate and arrange transport of Engineers, tools & equipment to and from job sites
• Answer customer queries and provide remote technical support.

Requirements:

• Diploma in Marine Engineering or similar.
• Past experience in marine cranes & deck machinery required.
• Experience in coordinating marine service work, especially afloat repairs will be an advantage.
• Able to commit overtime.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

(2 years contract renewable)

4 days, 12 hrs rotating shift from 7-7; first few months permanent night shift from 8.30pm-6am

Currently the 4 days shift is spread from Monday to Saturday, 2 days off. Sunday is rotating standby.

Salary: $2700 -$3000

Location: Bedok office

Job scope:

• To perform comprehensive maintenance for system
• To perform site supervision and hands on when required..
• To perform troubleshooting and devise resolution when issues or faults arises.
• To communicate/supervise contractors on safety and work related tasks.
• To execute job related tasks assigned by Engineer/Shift Engineer.
• To complete reports for jobs done.

Requirements:

• Diploma in Mechatronics, Electrical or Electronics
• Willing to work at height (6 meters) on outdoor public road on gantries.
• Experience in electrical and electronic works.
• Class 3 driving license is required
• Experience in basic Microsoft office.
• Understand basic Window system.
• Experience in site supervision work.
• Understand in Mechanical/Electrical/Electronic system
• Able to work in 12 hours rotating shift, first few months will be permanent night shifts

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Review project specs to ensure equipment meets contract requirements
• Prepare and approve instrument and electrical deliverables (e.g. wiring diagrams, lists, data sheets)
• Create material requests and evaluate bids for electrical and instrument equipment
• Develop engineering standards and procedures for design
• Monitor project costs and schedules
• Attend technical meetings and address client feedback
• Support plant start-up and on-site troubleshooting
• Provide technical support and estimates to the sales team
• Advise engineers and Project Managers
• Follow company health and safety guidelines

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5 years of relevant experience
• Familiar with key engineering concepts and practices
• Strong organizational and multi-tasking skills
• Excellent problem-solving and analytical abilities
• Proficient in Microsoft Office, Microsoft Project, and AutoCAD
• Strong verbal and written communication skills
• Able to work independently with attention to detail
• Good teamwork skills
• Knowledge of hazard area classification
• Fluent in English (speaking and writing)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea

Job Description:

• Implement strategies to acquire new clients and expand the customer base within the security and IT solutions industry
• Perform needs assessments to understand clients' security requirements and recommend suitable solutions
• Maintain up-to-date knowledge of advancements in technology and the company's product offerings
• Provide product demonstrations and compelling presentations to highlight the benefits of solutions
• Craft tailored sales proposals that address clients' specific security needs and emphasize the value proposition

Job Requirements:

• Min a bachelor's degree in IT engineering, or related field is preferred. Additional technical qualifications in security systems or electronics are a plus.
• Demonstrated success as a sales executive in the IT or physical security industry, with specific knowledge of CCTV, access control systems (ACS), network technology
• Experience with selling SaaS solutions is highly advantageous.

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845