Essential Duties and Responsibilities:

1. Quality Assurance and Control:

• Develop, implement, and maintain quality assurance plans, procedures, and control measures.
• Monitor and analyse production processes to detect and resolve quality issues.
• Ensure compliance with relevant regulatory requirements, including FDA, ISO 13485, and other applicable standards.
• Support internal and external audits and regulatory inspections.
• Investigate and resolve product-related issues, deviations, and non-conformities, with the authority to recommend corrective and preventive actions.
• Ensure the non-conformance or quality issue is resolved and complete in a timely manner.
• Participate in new product introductions to ensure quality is built into all products early in their life cycle
• Support validation processes including IQ, OQ, PQ, process validation and test method validation.

2. Process Improvement

• Identify opportunities for process improvements to enhance product quality and manufacturing efficiency.
• Lead and drive QA initiatives across the product areas
• Lead or participate in root cause analysis and corrective action planning.
• Support and drive cost improvement project

3. Customer Interaction:

• Address customer complaints and feedback related to product quality.
• Work closely with customers to understand their quality requirements and ensure that products meet their specifications.
• Communicated on any potential change request of the processes to customer.
• Provide technical support and quality-related information to customers.

4. Documentation and Reporting:

• Maintain comprehensive records of quality control activities, inspection results, and non-conformance reports.
• Prepare and support monthly / annual quality reports to management and other stakeholders.
• Ensure proper documentation and traceability throughout the manufacturing process.

5. Training and Development:

• Train manufacturing staff on quality standards, procedures, and best practices.
• Promote a culture of quality and continuous improvement within the organization.

Education/Experience and Qualifications:

• Degree in Engineering or science, with 2 - 5 years of progressive Quality responsibility, preferably in medical device / pharmaceutical manufacturing.
• Diploma holders in Engineering or science with more than 5 years' experience in Quality are welcomed to apply
• Knowledge of regulatory requirements and quality standards, including FDA regulations and ISO 13485 standards.
• Strong analytical and problem-solving skills, with the ability to troubleshoot complex issues.

Job Responsibilities and Duties

• Project management and daily operations including inspections, handover and site measurements.
• Prepare submission of shop drawing, method of statement, progress claims and project management reports
• Supervise and monitor projects are carried out in accordance to company's operating procedures, quality standards and contractual specifications
• Ensure environmental, safety and health practices are carried out at all times

Requirements (Qualification & Experience)

• Candidate must possess at least a Diploma/ Bachelor's degree in Civil Engineering or its equivalent
• Positive attitude, including being self-motivated, responsible and taking ownership of work
• Minimum 5 years' of working experience in Construction industry will be an added advantage
• Strong analytical and communication skills

Role & Profile

In a challenging and multicultural environment, we are looking for an experienced Platform Engineer to join AI Factory team of Digital Excellence Center department. This person will be a part of a dynamic team, focused on massively improving the operational efficiency of the organization related to on premise or on our hybrid platform.

This is an exciting opportunity for a talented team player to be part of a technology team that is responsible of a portfolio of solutions for various business lines of the bank (Risk, Finance, Compliance, Market Risk, Trade Finance, Operations, and Advanced analytics tools evaluations).

This position requires a candidate with,

• At least a bachelor degree in computer studies
• Minimum 5 years of experience in software engineering role ideally in banking environment
• Experienced with DataIku development or similar tools
• Experienced with infrastructure build / maintenance (on premise or cloud)
• Good knowledge on virtual machines, Kubernetes / Docker hosting and setup
• Knowledge of Python programming and Shell scripting
• Strong troubleshooting and debugging skills in Linux OS and networking
• Proactive style of working with a strong ethos of continuous learning.

Key job responsibilities

You report to Data Analytics / AIF Factory team head of DEC.

Role of Platform Engineer encompasses:

- Research, design and deploy software & tools required for AI factory team and their customers. The software infrastructure asset may include DataIku, MLOps, Graph, Vector databases

- Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.

- Work with infrastructure operation teams to integrate hardware and software systems and develop specifications and performance requirements to deliver quality platform experience

- Ensure infrastructure assets are patched to manage vulnerabilities and upgraded before it gets obsolete.

- Analyze user needs in terms of scalability, availability and security to design and cater infrastructure and software solutions

- Provide support for critical business needs on platform troubleshooting / scalability issues

- Configure and extend custom monitoring solutions for proactive platform management

- Assist users in setting up and deploying new DataIku projects; collaborate with data scientists and analysts to optimize project workflows

- Provide support and guidance to users on platform capabilities and features; create documentations and best practices

- Ensure smooth integration of DataIku projects with existing systems and data sources

Preferred (additional skills preferred, but not mandatory)

- Knowledge on Data modeling, Data science, Data processing, etc.

- Exposure to cloud infrastructure #DevFinSecOps

- ITIL process and policies

Next Step

Prepare your updated resume and expected package.

Simply click on 'Apply here' or email to [email protected] to drop your resume

All shortlisted candidates will be contacted.

Prasant Sirohi

EA License Number: 91C2918

Registration Number: R22106307

Company Profile

M3’s client is an established company with many years of experience in the spray painting and powder coating services in Singapore. They specialize in coating for electrical & electronics consumer products, life science equipment, computer casing and machinery with all possible coating methodology.

Company Location

Woodlands

Working Hours

Mon – Fri: 8am – 5pm

Sat: 8am – 12pm

5.5 Work week

Job Responsibility

• Maintenance of building, facilities, and security at all Company’s sites.
• Coordinate and execute, when necessary, inspection, testing, general maintenance, and repair of the critical site systems and equipment.
• Ensure that all equipment and other facilities are working properly.
• Critical systems and equipment include power/ UPS, backup generator, and fuel supply. HVAC (Heating, Ventilation, Air Conditioning), plumbing/ water supply, security doors/ alarms/ cameras, Fire safety systems and equipment.
• Provide situation/ status updates to the Facility Manager on issues which are to be resolved and the critical system or equipment is fully operational.
• Initiate interventions to solve problems in the facilities and develop a system for cleaning, repair and maintenance of facilities.
• Deliver timely and efficient solutions to facility-related requests.
• Liaise with contractors on maintenance/ repair.
• Supervise contractor on-site.
• Review the risk assessment submitted by the contractor prior to the commencement of work.
• Ensure required safety requirements are in place prior to the commencement of work.

Job Requirements

• Usually 3-5 years in facilities management, engineering, or maintenance roles.
• Strong understanding of building systems (HVAC, electrical, plumbing).
• Ability to perform site inspections and oversee maintenance tasks.
• Knowledge of emergency procedures and safety protocols.
• Good knowledge on Equipments: Aircon, Aircompressor,Wastewater treatment plant, Treatment line, Batch Oven, Conveyuer line Oven, Air compressor , Air Filter, Air Dryer

Sophia Lu

R1100200

Senior Recruiter

JD

Responsibilities:

• Develop, implement, and maintain AI models and algorithms, including Generative AI models, to

enhance product capabilities and automate processes.

• Collaborate with cross-functional teams to understand business requirements and translate them into

technical solutions using Generative AI technologies where applicable.

• Integrate Generative AI solutions with existing products and platforms to deliver seamless functionality

and performance.

• Optimize AI models for efficiency, scalability, and cost-effectiveness, with a focus on the efficient

deployment of Generative AI tools.

• Monitor and evaluate the performance of AI solutions, including Generative AI models, making

adjustments and improvements as needed.

• Stay updated with the latest advancements in AI, Generative AI, and machine learning, applying new

techniques and technologies as appropriate.

• Document processes, methodologies, and findings to support knowledge sharing within the team, with

special attention to the usage of Generative AI tools.

• Collaborate on the integration of Generative AI models into existing IT Service Management (ITSM)

platforms to enhance automation and service efficiency.

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.
• Proven experience as an AI Engineer or similar role with a track record of deploying AI solutions,
including Generative AI models, in production.
• Strong programming skills in languages such as Python, Java, or C++.
• Proficiency with machine learning frameworks and libraries (e.g., TensorFlow, PyTorch, scikit-learn).
• Experience with data preprocessing, feature engineering, and model evaluation.
• Familiarity with cloud platforms and services (e.g., AWS, Azure, Google Cloud) and their AI/ML tools,
especially AWS Bedrock.
• Strong problem-solving skills and the ability to work independently and collaboratively in a fast-paced
environment.
• Excellent communication skills, both written and verbal, with the ability to explain complex technical
concepts to non-technical stakeholders.
• Experience with Generative AI, NLP, and transformer-based models.
• Knowledge of the Langchain technology stack and AWS Bedrock for Generative AI solutions.
• Familiarity with IT Service Management (ITSM) tools and processes, with the ability to integrate AIdriven automation

Element has an opportunity for an Associate Engineer to join our rapidly expanding team. In this role, you will perform a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Provide technical and engineering leadership, and supports the development of new technologies within a local laboratory and be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Be expected to obtain guidance in non-routine situation testing and have the ability to oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide Input and support on business development opportunities with new or existing customers
• Be confident in making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders and assist in the professional development of novice technicians and engineers within the local laboratory and carry out crucial examination and implementation of testing concepts and data
• Utilize an assortment of skill, methods, procedures and materials in advanced testing analysis and be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelor Degree in Materials Science, Materials Engineering or Civil Engineering
• Have a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• Possesses a demonstrated ability to apply academic knowledge within the context of Element’s business and working knowledge of laboratory safety
• In-depth understanding of testing concepts
• Can analyze and compiles testing data from the tests performed
• Possess strong computer skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Job Description & Requirements

• 5 years of experience in Helpdesk support, maintenance, and basic infrastructure/network troubleshooting.
• Knowledge of ITIL processes and practices.
• Basic understanding of infrastructure and network concepts, including TCP/IP, DNS, DHCP, and network protocols.
• Strong technical knowledge of desktop operating systems, applications, and hardware.
• Excellent problem-solving and troubleshooting skills.
• Strong communication and customer service skills.
• Ability to work independently as well as in a team environment.
• Flexibility to work outside of normal business hours, if required.

Education Requirement

Relevant certifications such as CompTIA A+, Microsoft Certified Desktop Support Technician (MCDST), ITIL Foundation Certification, or basic networking certifications (e.g., CCNA) are a plus.

Position Summary

You are responsible for production, assembly, design and development of hardware and equipment the Company’s products. The job also involves sourcing of components, participating in technical design, working with Software Engineers and/or Project Manager in budgeting, scheduling, management of contractors, and installation, deployment and maintenance of the products in an operational environment (on-site when required).

Main Responsibilities

• System set-up; troubleshooting, resolution of anomalies discovered in equipment and methods, provision of assistance in maintenance service
• Installation of equipment room racking, servers and UPS. cable works for power and communication
• Installation and maintanance of electrical and Instrument equipment
• Installation, configuration, testing and maintenance of operating systems, application software and system management tools. Ensuring the highest levels of systems and infrastructure availability and security.
• Managing and monitoring all systems and infrastructure.
• Collation of information on hardware systems, costs of development, work program and technical specification
• Participation in the development and testing process, systems testing and commissioning
• Provision of support of design and installation of ‘turnkey’ and / or ‘user-defined’ system
• Sourcing and identification of suppliers for evaluation
• Conduct of preliminary assessment on systems requirement of the clients and matching with components recommended by sub-contractors
• Provision of assistance in systems deployment, system implementation and / or installation
• Performance of corrective, preventive maintenance work in-house or at customer site (on-site)
• Implementation of enhancement/upgrades as instructed
• Preparation of documentation and logistics support where necessary
• Travelling maybe required from time to time

Skills and Experience

· Minimum 5 years hands-on experience in electrical and electronic system set-up, installation, servicing, troubleshooting, and maintenance

· Strong debugging skills

· Strong team work as well as able to work independently

· Well-versed in:

Micorsoft Windows Server and Desktop Operating Systems

Microsoft Office

Single-Line Diagram

Electrical Drawings

· Experience in:

Hands-on Unit Testing

Hands-on Integration Testing

AutoCAD

Network Diagrams

Project Management

· Competency in:

IT Network installation, configuration, and administraton

IT Systems installation, configuration, and administraton

· Knowledge of:

Cyber Security concepts and implementation

iOS and Android platforms

Microsoft Project

Minimum Qualifications

· Degree in Electrical or Electronics Engineering, or equivalent practical experience

· Practical experience in:

System set-up, installation, servicing, troubleshooting, and maintenance

Attributes

· Critical thinking and problem-solving skills

· Strong interest and awareness of new technologies

· Proactive with good time-management skills

· Good interpersonal, analytical and communication skills;

· Ability to:

Multi-task, prioritize activities, work independently and calmly under pressure

Interact positively, clearly and professionally with peers, customers and vendors

Anticipate and take proactive actions

The Ideal Candidate

· You possess big picture thinking, a willingness to learn, dive into unfamiliar systems and resolve complex issues both from a business and technical perspective.

A US Tech Giant (One of the FAANG/MANGA companies) is looking for a Space & Power Network Deployment Engineer responsible for the managing and support of one of the world's largest and most complex networks. As a member of this team, you will have a unique opportunity to be involved in POP Infrastructure design, Space & Power related critical infrastructure projects and be involved in all aspects of Networking at the company.

Job Responsibilities:

• Execute regional space, power, cabling and other infrastructure requirements in support of Edge network requirements, present and future.
• Design/Plan new site electrical/mechanical critical infrastructure for Data Center sites.
• Work with Meta Engineers and design and draw layout of Edge/POP sites floor plans, allocate space assigned to network function, optical, backbone, IP, compute, etc.
• Execute all SOW Engineering design packages related to new or existing edge/pop sites as per Edge and Network Services (ENS) standards.
• Proactively contribute to documentation, automation and processes as they evolve.
• Understand the overall needs of current and future POP infrastructure.
• Guide retrospective reviews of completed projects with teams to incorporate lessons learned into the team's future roadmaps and goals.
• Ensure processes are being followed and all documentation and systems are delivered as per set standards.
• Support site acceptance process for new POP sites.
• Travel to site across states for site survey and evaluation on as per need basis.

The Candidate:

Minimum Qualifications:

• 8+ years of electrical engineer work
• Outstanding proficiency with AutoCAD/AutoDesk tools.
• Knowledge of engineering principles of the infrastructure architecture (space line up, air flow, cooling etc.)
• Knowledge of Telecom Central Offices, Data Center, Collocations and Remote Hut environments, to include engineering principles regarding power and other infrastructure.
• Understanding of optical network design, installation and maintenance for service providers or enterprise networks.
• Experience with field-based work in POPs, carrier hotels, data centers, and Central Office environments.
• Technical knowledge of various regional Data Center electrical and cooling configurations, IEC, NEMA standards, AC/DC power, power redundancy scenarios.
• Basic knowledge of optical theory, transport technologies, and the operation of optical transport systems.
• Analytical, interpersonal, and communications experience.
• Experience with communication and directing tasks to vendors/suppliers.
• Demonstrated experience analyzing situations and utilizing troubleshooting experience, systems and tools, and problem solving. Hands on experience on Power related projects is a plus.
• Experience working with limited supervision.
• Time management and organizational experience.
• Experience working in a global team environment.
• Willing to travel, approximately 10 to 30% travel required.

MUST HAVE:

• Knowledge of Telecom Central Offices, Data Center, Collocations and Remote Hut environments, to include engineering principles regarding power and other infrastructure.
• Experience with communication and directing tasks to vendors/suppliers.
• Outstanding proficiency with AutoCAD/AutoDesk tools/BIM 360/Blue Beam.
• Professional Engineer license (PE or local Equivalent) is preferred.

We regret to inform that only shortlisted candidates will be contacted.

EA Registration No: Ng Xuan, R24123530

Allegis Group Singapore Pte Ltd, Company Reg No. 200909448N, EA License No. 10C4544

Career Highlights:

• Good career advancement
• Competitive compensation benefits
• Company’s transport available

Job Description:

• Develop a Non-Routine Lifting program and advise the Construction Manager accordingly.
• Develop specific Lift Plans.
• Liaise with the Engineering Department for engineering calculations and drawings as required to develop specific Lift Plans according to his Lifting program.
• Prepares procedure in coordination with vendors for internal shifting and load out operations.
• Wart management for project cargo loading and offloading operation active projects, load out operations by floating crane and Roll on load outs.
• Attend JSA meeting and client RA meeting for the assigned project and report to Section Head/Lifting Superintendent/Production Manager/GMO.
• Assist Engineer in preparing yard layout drawing for module location as per construction and load out sequence by confirmed projects and assisting tender department in lifting and load out feasibility check.
• Raise purchase requisition for the project required consumable and hardware items & sub-contractor works.
• Liaise with Lifting / Rigging Superintendent on a day-to-day basis for work progress.
• Liaise with client representatives, classification society surveyors and others to comply with inspection requirements.
• Resolve any technical problems or issues faced at the work site
• Ensuring that the ground conditions are safe for any lifting operation to be performed by mobile cranes

Job Requirements:

• At least 8 years of experience as a lifting supervisor.
• Experience and knowledge in heavy lifting.
• Obtained Lifting Supervisors Safety Course and Work-At-Height Certificate

· Checking plans, drawings and quantities for accuracy of calculations:

· Ensuring that all materials used and work performed are as per specifications:

· Liaising with contractors, supervisors, quantity surveyors and the general workforce involved in the project:

· Day-to-day management of the site, including supervising and monitoring the site labour force:

· Planning the work and efficiently organizing the plant and site facilities in order to meet agreed deadlines.

· Overseeing quality control, health and safety matters on site.

· Preparing VO and other reports as required.

· Other related duties, as assigned

Job Requirements:

- Diploma / Degree , related in Construction
- At least 1 year related working experience in Building Construction

- Bilingual in English and Mandarin in order to communicate and engage with Mandarin speaking customers.

- Willingness to learn & committed to accomplish datelines

Responsibilites

• Assist the Project Manager in producing, analysing and accepting design and technical details
• Assist the Project Manager in developing, managing and overseeing a safety management system for projects across the organisation
• Provide Engineering support to project, production and yard staff as directed by Project Manager.
• Provide technical expertise during design activities and reviews.
• Produce technical documentation as required to support daily operations and tendering activities
• Coordinate stakeholder activities during construction phases of projects not limited to clients, suppliers and contractors
• Create and maintain a culture of continuing improvement in safety performance and awareness across teams & work areas
• Execute Project Plan assigned by Project Manager.

Responsibilities

• Provide Quality Management System Support (IQA)
• Plan and develop the IQA checklist based on the objectives and scope assigned.
• Conduct IQA via desk-check and verification of artefacts from performed processes.
• Analyse evidence that is necessary and sufficient for the IQA and draw the resulting conclusions.
• Prepare IQA findings and observations. Communicate and present to the auditees and management.
• Responsible for any follow-up verification and record the implementation and effectiveness of the corrective actions taken.
• Provide support on user queries of Quality Management systems and processes.

Requirements

• working experience in Software Engineering Process Group (SEPG) or in a software environment that is CMMI or ISO 9001:2015 certified.
• Must be familiar with Capability Maturity Model Integration (CMMI) Development, software quality principles and ISO 9001 system.
• Must be familiar with software development life cycles and its related processes.
• Strong auditing and analytical skills with the ability to elicit root cause of process issue through asking the right questions.
• Ability to identify good practices and opportunities for improvement.
• Meticulous attention to details, good communication and interpersonal skills.
• Customer-centered disposition with good listening skills and patience.
• Familiar with software and tools such as MS Excel, MS PowerPoint, Lotus Notes, JIRA, GitLab, Bitbucket, Confluence.
• Experience in agile development environment will be an added advantage.
• Degree or Diploma in Computer Science, Information Technology or related disciplines.

• Attend to all daily quality and process related issues.
• Execute process validation for new and existing products with tooling and quality personnel.
• Participate in the Continuous Process Improvement programme to improve productivity, reduce scrap.
• Perform internal quality system audit.
• Optimize automation parameters and meeting specific cycle time for existing and new products.
• To provide timely support to ensure efficiency of production machines & equipment's are met.
• To work with respective department on product quality issues.
• Initiate containment plan and implement effective long term plan on quality related issues.
• Execute engineering change notice from customer.
• Analyze quality data collected periodically and provide recommendation to management for improvement.
• Compliance to all regulatory and in house system requirements especially for medical and automotive customers.
• Train and assess production staff on processes and product where applicable.
• Attend routine production and quality meetings.
• Perform additional tasks given by the management.

Job Requirements:

• Diploma with 2-3 years of relevant experience.
• Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA.
• Require to perform shift work (Morning & Afternoon shift).

Interested applicants, please email your resume to [email protected]

E-Ployment Consultancy

EA License No: 09C0884

EAP Name/ Registered No: Ivan Mah/ R1108310

Job Description

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Job Description & Requirements

Successful candidate will assist Project Manager on the following tasks:

• Site & project management and daily operations, routine/adhoc service work for industrial water treatment systems.
• Overall project planning, scheduling, monitoring and updating to meet project completion targets.
• Site co-ordination, monitoring and report work progress.
• Liaising, negotiating and managing sub-suppliers/sub-contractors in the region with respect to procurements and in-situ execution of sales contracts or projects.
• Assist Project Manager to coordinate and communicate with end-user customers, local and regional suppliers for the production of deliverables as per contractual specifications and schedules.
• Compiling and handing over operation and maintenance (O&M) manuals to our end-user customers
• Any other duties given by Project Manager to support on projects.

Skills and Experience:

• Degree/Diploma in Chemical, Environmental or Mechanical Engineering.
• Preferably with 3-5 years of related experience in project management, project engineering, operations for industrial water treatment systems.
• Ability to read and understand specification, fabrication, erection, and standard engineering drawings.
• A team player that is willing to work with different age groups and nationalities.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.
• Responds to fab issues by communicating with other engineers and participating in escalation conference calls. Verifies operational quality of system equipment unassisted . Assists senior engineers as needed.
• Follows all checklists and procedures and ensures correct Revs of procedures and schematics are available prior to performing work.
• Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve recurring technical problem. Demonstrates consistent ability to execute escalation plan. Able to resolve Day-Day issues. Exposure to systemic issue resolution. Able to support the preparation and delivery of technical issues to internal and external stakeholders. Knowledge in fundamental theories. Minimum aid needed to read circuit diagrams. Single primary product and platform. Executes projects to reduce costs and increase uptime.
• Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers (Testing). Has the ability to diagnose and resolve technical problems (Corrective maintenance). Uses training and experience to identify some process, software or hardware related system problems (Predictive maintains).
• Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management. Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge:

• Has established skills to perform a range of day-to-day activities.

Business Expertise:

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline.
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area.

Leadership:

• Has no supervisory responsibilities; manages own workload.

Problem Solving:

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options.

Impact:

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance.

Interpersonal Skills:

• Uses communication skills to exchange information.

Job Description

Key Responsibilities

• Design or modify electrical/electronic engineering assemblies, layouts/schematics and/or detailed drawings/specifications of difficult scope
• Problem identification and troubleshooting a variety of complex electrical problems with limited supervision
• Define, coordinate, perform and generate engineering test reports with limited supervision
• Technically lead and/or executes engineering projects, including development of key suppliers
• Implements concepts for variety of complex product issues and electrical solutions of difficult scope
• Generates electrical product specifications and reviews engineering documentation
• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines
• Interfaces with internal and external customers regarding complex electrical issues for specific projects
• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Educational Qualifications

• PhD/ Master/ Bachelor’s degree in Electrical Engineering, Electronics and Communication, Mechanical Engineering or related engineering field

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines
• Hands-on experience in electrical schematic diagram, PCB/ Low voltage circuit design for power and control
• Problem-solving and troubleshooting skills

Interpersonal Skills

• Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of internal and external stakeholders
• Self-starting individual, proactive and resourceful
• Good communication and interpersonal skills

Work Location

• Science Park II

Key Qualifications

• Proficiency in programming languages such as Java, Python, or JavaScript.
• Experience with cloud hosting platforms such as AWS, Azure, or Google Cloud Platform.
• Strong understanding of Kubernetes and containerisation technologies.
• Excellent problem-solving skills and attention to detail.
• Strong communication and interpersonal skills, with the ability to work effectively in a team environment.

Description
- Design, develop, and maintain full stack applications, with a focus on platform development and cloud hosting.

- Collaborate with multi-functional teams to define project requirements and deliver high-quality solutions.

- Implement best practices for software development, including code reviews, testing, and documentation.

- Optimise application performance and scalability through the use of Kubernetes and other cloud technologies.

- Develop and maintain deployment pipelines to automate the software release process.

- Stay up-to-date with the latest trends and technologies in software development and platform engineering.

Education & Experience

Bachelor's degree in Computer Science, Engineering, or related field.

Job Responsibilities:

• General encapsulation and optimization of the underlying framework; ensure the stability and efficiency of the underlying framework SDK, making it cross-platform and optimized for specific platforms.
• Transformation of algorithm application achievements; conversion of deep learning-related algorithm achievements, including detection, classification, segmentation, and other algorithms implemented based on the deep learning underlying SDK.
• Responsible for the creation and optimization of engineering algorithm strategies; design and implementation of engineering algorithm strategies for industry businesses based on the algorithm SDK; optimize engineering algorithm strategies for different application scenarios.

Minimum Qualifications:

• Bachelor's degree or above in computer science, electronics, or related fields.
• Proficiency in C/C++ development, solid programming skills, familiarity with common data structures and algorithms, object-oriented programming, and common architecture and design patterns.

Preferred Qualifications:

• Master's degree or equivalent experience in industry with in computer science, electronics, or related fields.
• Preference for those familiar with GPU programming, RTOS (NuttX, RT-Thread) and deep learning-related knowledge, image processing algorithms.
• Those with Android or iOS development experience are preferred.

Essential Skills:

• Excellent networking and interpersonal skills.
• Problem-solving, and analytical thinking.
• Highly organized, diligent with great attention to detail.
• Active listener, able to interpret and playback stakeholder requirements.
• Highly driven and able to work individually and as part of a team.

We regret to inform you that only shortlisted candidates will be contacted.

View more jobs : www.blueboxjobs.com

As a Field Engineer (C&S), you will be responsible for monitoring construction / maintenance activities. The incumbent should take steps to ensure that construction progresses as scheduled and that work specification are followed. Daily, the incumbent must inspect the construction site and coordinate delivery schedules with contractors.

You are also expected to perform the following:
• Maintenance of all Civil and Structural plant assets, including drainage systems and oil traps, insulation & cladding, coating, furnace refractory, etc. to ensure high plant availability and equipment integrity.
• Undertake all Civil and Structure maintenance activities related to Corrective and Preventive Actions and Management of Change (MOC) activities related to the Production Unit
• Assure that supervisors and inspectors adhere to the approved Inspection and Test Plans and project quality plans when conducting witness, inspection, and surveillance checks. Ensure Quality Control tests and checks are properly recorded and conform to project specifications, AFC drawings, and method statements.
• Ensure accuracy of approved construction drawings, documents and procedures for proper and correct construction execution.
• Provides good documentation to ensure all Civil and Structure drawings can be updated to reflect the latest changes.
• Ensure compliance to HSE standards and requirements to ensure that the Bukom Petrochemical Complex is a safe place to work in.
• Confirm day-to-day civil maintenance work and co-ordinate work details with contractors where appropriate.
• When required, to attend daily planning sessions with operations and confirm the schedule and procedures for safe and efficient execution of the job.
• Work with TA / SD (Plant Turn around / Shut down) leads & Planners to effectively integrate work scope into overall execution strategies in a TA / SD event.
• Execute the civil maintenance works using contractors.
• Assist Maintenance Manager in managing shutdowns and project works.
• Carry out any other related duties as required.
• Perform the role of an Authorized Permit Applicant and/or Authorized Engineer as per site Permit to Work (e-PTW) requirement.

Requirement:
• Degree/Diploma in Civil Engineering or equivalent.
• Min. 3 to 5 years civil engineering experience in construction or maintenance in oil and gas, chemical / petrochemical or related industries will be an advantage.
• Knowledge in local authority requirements e.g. the Building Construction Authority (BCA), Ministry of Manpower (MOM), etc.
• Knowledge or familiarity with Coating / Painting (NACE qualified), Insulation & Cladding and Refractory works will be an advantage.
• SAP (GSAP) knowledge in Maintenance Module will be an advantage.
• Experience in field work relating to interfacing and stakeholder’s engagement.
• Excellent communication, analytical, problem-solving, and troubleshooting skills.
• Brown field experience and demonstrated ability to coordinate and interact with the run-and-maintain organization
• Ability to use business software, including Excel, PowerPoint, Word, PDF writer with proficiency in pivot tables and data interpretation.

Job Description

We are seeking a talented and experienced DevOps Engineer to join our dynamic tech team. In this role, you will be instrumental in designing, implementing, and maintaining the infrastructure that supports our rapidly evolving platform. You will collaborate closely with our development, QA, and product teams to streamline deployment processes, enhance system performance, and ensure the scalability and reliability of our services.

Key Responsibilities:

• Design, implement, and manage scalable, secure, and reliable infrastructure on AWS EC2.
• Utilize Docker, Kubernetes, and EKS for containerization and orchestration of microservices.
• Develop and maintain CI/CD pipelines using GitLab and ArgoCD to automate the build, test, and deployment processes.
• Integrate QA tooling into CI/CD pipelines, including Cypress for E2E testing.

Configuration and Automation:

• Implement Infrastructure as Code (IaC) using Terraform for efficient resource provisioning.
• Manage configuration management using Ansible to automate system configurations and deployments.

Networking and Security:

• Configure and manage load balancers using Traefik to ensure optimal traffic distribution.
• Implement service mesh technologies like LinkerD to manage service-to-service communication securely.
• Ensure infrastructure security and compliance with industry best practices.

Monitoring and Logging:

• Set up and maintain monitoring and alerting systems using tools like CloudWatch, Prometheus, Grafana, and Splunk.
• Proactively identify and resolve system issues to maintain high availability and performance.

Collaboration and Support:

• Work closely with development and QA teams to understand application requirements and ensure seamless integration.
• Provide support for development and staging environments, facilitating efficient testing and deployment cycles.

Optimization and Cost Management:

• Analyze system performance metrics to optimize infrastructure for cost and efficiency.
• Implement strategies for resource optimization without compromising on performance.

Requirements

• Bachelor's degree in Computer Science, Information Technology, Engineering, or a related field.
• Minimum of 3 years of experience in a DevOps or similar role.
• Proven experience with AWS services, particularly EC2, RDS, and networking components.
• Strong expertise in containerization using Docker and orchestration with Kubernetes.
• Past experience as a software developer is highly advantageous.
• Proficiency in setting up CI/CD pipelines using GitLab and ArgoCD.
• Hands-on experience with Infrastructure as Code tools like Terraform.
• Familiarity with configuration management tools such as Ansible.
• Knowledge of load balancing with Traefik and service mesh implementations using LinkerD.
• Experience with logging and monitoring tools, specifically Splunk.
• Scripting skills in Bash, Python, or Go for automation tasks.
• Understanding of microservices architecture and RESTful APIs.
• Familiarity with our tech stack is a plus: TypeScript, Go, ReactJS, ExpressJS,
• Gin-gonic, GraphQL with JWT authentication.

Soft Skills:

• Strong problem-solving and analytical abilities.
• Excellent communication and interpersonal skills.
• Ability to work collaboratively in a fast-paced, agile environment.
• Detail-oriented with a focus on delivering high-quality work.

Preferred Qualifications:

• Certifications such as AWS Certified DevOps Engineer, Certified Kubernetes Administrator (CKA), or similar.
• Knowledge of Redis, MySQL, PostgreSQL, and Elasticsearch.
• Experience with QA tools integration, including Cypress and Pact.js.

Responsibilities:

1.Responsible for research and development of image generation technologies, including the development of foundational models for text-to-image generation, image editing techniques, image enhancement, and multimodal generation of text and images.

2.Keep up with the latest advancements in AIGC algorithms, be responsible for the research and development and engineering implementation of related technologies, and accelerate the adoption and optimization of cutting-edge AIGC technologies in business scenarios such as live broadcasting, short video, and instant messaging.

Requirements:

1.A Master's or Doctoral degree in computer vision, pattern recognition, machine learning, or related fields.

2.Some work experience in computer vision, deep learning, machine learning, computer graphics, etc, familiar with mainstream models and algorithms, and capable of following up and implementing new algorithms.

3.Strong engineering implementation ability, proficient in at least one deep learning framework (such as TensorFlow, PyTorch, etc.).

4.Good learning ability, teamwork, and communication skills.

5.Priority will be given to candidates with experience in GAN-related image generation and editing, video editing, style transfer, portrait editing, etc.

6.Priority will be given to candidates with experience in Stable Diffusion, ControlNet, DreamBooth, LoRA, etc.

7.Priority will be given to candidates who have published papers in internationally renowned AI conferences or have won awards in ACM competitions.

Job Description

Capabilities Development

*Lead the development and implementation of Group and partners OEMs’ (Original Equipment Manufacturers) new repair capabilities and report to the Industrialization Manager.

* Analyze technical data, gather market data, investment requirements to perform feasibility studies and Return on Investment.

* Perform self-assessments, engineering studies, build up justification file.

* Liaise with Quality for smooth airworthiness application for testing & repair capability integration.

*Liaise with the OEMs to clarify the requirements.

*Develop, source new equipment, consumables and chemicals and support investments linked to testing & repair policies.

* Drive the progress of the tasks, pilot projects’ milestones review with various stakeholders, report advancement, track investments and expenses, monitor contractors and suppliers, devise maintenance plans.

* Lead operations trainings and validation tests.

* Establish calibration requirements.

* Follow-up the testing & repair ramp-up with the workshops and support the Entry Into Service for new programs.

* Report to management. Flow down relevant and timely information.

Support & maintain new capabilities

* Coordinate with Product Support Engineer (PSE), and Operations personal to ensure optimal customer support.

* Assist the lead equipment maintenance when required.

* Implement systems or components modifications following notification of change related to CMM, Service Bulletins (SB) or Service Information Letters (SIL).

* Support workshop implementation of new requirements upon fleet upgrade and retrofit campaigns.

* Develop the Integrated Logistic Support at SEDSA levels.

* Help sourcing for material, suppliers, 3rd parties, alternatives.

* Review calibration requirements.

* Take a pro-active approach, initiate creative solutions to maintenance issues and assist the workshops in implementing best practices, Continuous Improvement, LEAN operations, cost

reductions and applying lessons-learned from previous or bench-marked experiences.

* Ensure that communication between all stakeholders, Head Quarter, OEMs, Workshops, Quality, Sales, Continuous Improvement, Supply Chain, Customers, Suppliers, is optimum.

* Ensure SEDSA contract terms & conditions are understood & satisfied. Pro-actively manage contractual issues with 3rd Parties and suppliers.

* Report to management. Flow down relevant and timely information.

Profile & Soft Skills

* Be rigorous and organized, able to handle multi-tasking and priorities.

* At ease to report and present progress through regular reviews with the management.

* Develop excellent relationships across multiple organizations & with all levels of workshops and other Company personnel.

* Safeguard interest of SAFRAN Electronics & Defense Services Asia (SEDSA) and partners OEMs.

Health, Safety & Environment

* Comply with all health, safety and environment (HSE) regulations as prescribed by law and company’s policies.

* Actively participate and contribute to HSE initiatives & Corporate HSE programs and in HSE risk communications & mitigations.

* Actively participate and contribute to 5S initiatives.

Continuous Improvement and Innovation

* Lead by example the Continuous Improvement and Innovation initiatives in the company.

* Implement innovations.

* Pilot Company Lean and Improvement projects. Review progress, deliverables and gains for key innovations.

* Be a driving force in the Participative Innovation, ONE SAFRAN and Green Belts Improvement

* Spearhead the QRQC, SQCDPI, 5S, Root Cause Analysis, ONE SAFRAN methodologies to be best in class.

* Perform any other duties as assigned.

Experience and Qualifications:

a) Degree in Mechanical/Electrical/Aeronautical Engineering

b) At least 3 years of Aviation Engineering experience, Technical Support Aircraft Maintenance and Repair Operations, in OEM or MRO environment

c) Proficient in product support and trouble shooting procedures

d) Hands-on experience on design and wiring of electronics test fixtures.

e) Experience in OEM technical support, or related MRO operations/engineering

f) Must be familiar with technical support environment, processes, and manuals used for aircraft maintenance. Working knowledge of the Aviation Airworthiness requirements like Part 145 is advantageous

g) Effective Project Management and interpersonal skills

h) Experience in calibration requirements and procedures

i) Proficient with Microsoft software applications

j) Working knowledge of the Aviation Airworthiness requirements like Part 145 is advantageous

k) Sound knowledge of quality systems such as ISO9000 and AS9110

l) Excellent attitude, good team player, motivated, driven, committed, reliable. Take ownership of the projects

m) Ability to multi task in a dynamic environment

n) Excellent communications skills. Well versed in written and spoken English

o) Able to think ahead, process data, make decisions and solve problems.