• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

[Singaporean only]

KEY DUTIES AND RESPONSIBILITES:

• Perform various activities and tasks required in the tablet coating production areas.
• Operate all relevant equipment, clean, assemble and maintain the cleanliness of the equipment.
• Perform and maintain the documentation of operations in accordance with cGMP requirement.
• Operate the equipment appropriately in accordance with Standard Operating Procedure / batch document.
• Perform online monitoring of in process parameters / checks throughout the batch.
• Complete all relevant records and other documentation required for tablet coating, maintenance and cleaning of equipment in the work area.
• Perform all activities in accordance with cGMP.
• Maintain the cleanliness of work area to ensure cGMP compliance.
• Perform all other relevant duties required to meet the schedule.
• Check relevant material and product details against batch document
• Co-ordination with Engineering for break down rectification of coating and related solution mixing equipment.
• Involve in equipment / process qualification.
• Participate in investigation of process deviation, cGMP and all other compliance related matters, where applicable.
• Ensure compliance to GxP / Safety / Quality policies.

REQUIREMENT

• Good understanding of safe working practices and cGMP.
• Experience in tablet coating of oral solid dosage manufacturing is preferred.
• A good team player with positive learning attitude.
• Willing to work in Tuas area, in cleanroom environment with full gowning.

EDUCATION & EXPERIENCE

• Minimum GCE 'O' level or NITEC or Higher NITEC or Diploma in Biotechnology /Biomedical / Mechanical / Mechatronics Engineering or relevant disciplines
• With 2-5 years of manufacturing experience in Pharmaceutical or related industries.
• Entry level NITEC / Higher NITEC / Diploma candidates are welcome to apply.

Responsibilities

· Produce, shoot & edit photography and videography content for the Confirm Good TikTok platforms

· Assist in content creation, working closely with project managers and content strategists

· Plan, script and storyboard video assignments

Requirements

· Experienced with photography and videography equipment

· Familiar with pre-planning/production, lighting, storyboarding, equipment like slider and gimbal etc

· Good knowledge in video and photo-editing software, Capcut etc

· Basic knowledge of Adobe Photoshop and Illustrator

· Good communication skills

· Knowledgeable in digital content and platforms

· An eye for trends and explore different technics able to produce video/photography content that goes ViRAL

(Minimum commitment of 6 months)

* Internship may lead to conversion to permanent role.

*Check our videos here:

https://www.tiktok.com/@confirmgoodsg

https://www.tiktok.com/@tastesoulsg

https://www.tiktok.com/@goodlobangsg

https://www.tiktok.com/@vanitysuitesg

https://www.tiktok.com/@goodtoflynews

To Apply, submit your CV and portfolio.

Overview of Accenture Industry X: Accenture's Industry X brings together engineering and manufacturing services to transform how businesses operate in the digital age. By combining the power of digital technologies with deep industry expertise, we help clients across multiple industries, including Semiconductor, Automotive, Industrial, Consumer Packaged Goods(CPG) and EV and Battery Manufacturing sectors, drive innovation, enhance efficiency, and achieve greater operational performance. Industry X services span across smart connected products, industrial equipment, digital manufacturing, and intelligent asset management, enabling our clients to leverage data and advanced technologies to create value and achieve competitive advantage.

Position Overview: Accenture's Industry X is seeking a dynamic and experienced leader with deep domain expertise in manufacturing and extensive shopfloor experience. The ideal candidate will have a strong background in consulting, system integration, and consultative selling, combined with hands-on experience in manufacturing environments. This role demands a professional who can drive strategic initiatives, deliver transformative solutions, foster robust client relationships, and build a high-performing consulting practice. The primary industry focus will be on Semiconductor, Automotive, Industrial and Battery industries. The position is based in Singapore, and a proven track record in South East Asia is crucial.

Key Responsibilities:

Consulting and Advisory:

• Provide expert advice and strategic guidance to clients in the Semiconductor, Automotive, CPG, Industrials, and Battery sectors.
• Develop and implement comprehensive consulting strategies to address client challenges specific to manufacturing operations.
• Conduct thorough assessments of manufacturing processes and provide actionable recommendations to optimize client operations.

Domain Expertise:

• Leverage deep manufacturing domain expertise, including shopfloor operations, to deliver innovative and effective solutions.
• Stay abreast of industry trends, emerging technologies, and best practices in manufacturing.
• Serve as a subject matter expert and thought leader at least 2- 3 of the following industries : Semiconductor, Automotive, CPG, Industrials, and Battery sectors.

System Integration:

• Lead and manage system integration projects, ensuring seamless implementation and integration of manufacturing technologies.
• Collaborate with cross-functional teams to design, develop, and deploy integrated solutions for manufacturing clients.
• Ensure projects are delivered on time, within scope, and within budget.

Consultative Selling:

• Identify and pursue new business opportunities through consultative selling techniques.
• Build and maintain strong client relationships, understanding their manufacturing needs and providing tailored solutions.
• Develop and deliver compelling proposals and presentations to prospective clients.

Practice Building:

• Build and scale a high-performing consulting practice within Industry X.
• Recruit, mentor, and develop a team of consultants with strong manufacturing backgrounds to deliver exceptional client value.
• Define and implement best practices, methodologies, and frameworks to ensure consistency and quality across engagements.

Project Management:

• Oversee project lifecycle from initiation to completion, ensuring successful delivery of client engagements.
• Manage project risks, issues, and changes to ensure project success.
• Monitor project performance and provide regular updates to stakeholders.

Data and Integration Skills:

• Develop and implement data integration strategies to support seamless information flow across manufacturing systems.
• Leverage data analytics to provide insights and drive decision-making processes.
• Ensure data integrity, security, and compliance with industry standards.
• Collaborate with IT teams to integrate various data sources and systems, ensuring a cohesive digital ecosystem.

Smart Manufacturing and Advanced Technologies:

• Drive the adoption and implementation of smart manufacturing solutions, including IoT/IIoT, AI for manufacturing, and Industry 4.0 technologies.
• Implement Digital Twin technologies to create virtual replicas of physical manufacturing processes and optimize performance.
• Utilize AI and machine learning to enhance manufacturing efficiency, predictive maintenance, and quality control.
• Stay current with advancements in smart manufacturing technologies and apply them to improve client operations.

Technical Stack Experience:

• Demonstrated experience with SAP Digital Manufacturing, Siemens OpCenter, AVEVA, and SAP Production Planning.
• Knowledge of manufacturing execution systems (MES), enterprise resource planning (ERP) systems, and other key industrial software platforms.
• Familiarity with integration and deployment of these systems in manufacturing environments.
• Strong technical skills in data management, system integration, and automation technologies.

Standards and Protocols:

• Deep understanding and experience with ISA 95, RAMI 4.0, UNS (Unified Namespace), and IT-OT Integration.
• Expertise in integrating and managing PLC (Programmable Logic Controllers), SCADA (Supervisory Control and Data Acquisition), and Historian systems.
• Ability to implement and leverage these standards and protocols to ensure seamless and efficient manufacturing operations.

Intersection of Supply Chain, Manufacturing, and Engineering:

• Knowledge of the interplay between supply chain management, manufacturing processes, and engineering principles.
• Ability to optimize supply chain operations in conjunction with manufacturing and engineering requirements.
• Experience in aligning supply chain strategies with manufacturing capabilities and engineering design processes.

Industrial Automation, Instrumentation, and Control:

• Extensive experience with industrial automation, instrumentation, and control systems.
• Proficiency in designing and implementing automated manufacturing systems to improve efficiency and reduce operational costs.
• Strong knowledge of control system architecture and the integration of various control systems within manufacturing operations.

Greenfield and Brownfield Factories:

• Proven experience in managing greenfield and brownfield factory projects from design to commissioning and sustenance.
• Expertise in planning, designing, and executing new factory setups (greenfield) and upgrading existing facilities (brownfield).
• Ability to ensure project sustainability and continuous improvement post-commissioning.

Duties and Responsibilities:

• Identify business needs, develop value propositions, and contribute to the generation of compelling proposals.
• Lead discovery sessions with customers to qualify opportunities.
• Develop and articulate trends, implications, possibilities, and solutions; build compelling presentations to align with customer needs; deliver presentations to executive and mid-manager levels.
• Own and manage the discovery phase with clients.
• Leverage Challenger methodology to understand and challenge customer status quo.
• Clearly articulate "why Accenture?" in non-technical and technical terms as required.
• Manage and execute tactics using account-based research, social media, executive outreach, etc.
• Collaborate with Industry Portfolio Directors and Country Managers/Sales Leaders to drive key business metrics.
• Understand campaign/initiative value propositions and presentation materials.
• Drive campaign execution with Industry, Marketing, and Sales teams.
• Deliver sales enablement training on collateral as required.
• Coordinate with PreSales to deliver effective, value-focused demonstrations.
• Manage execution plans and report weekly progress.
• Support the closing process if required.
• Build a strategy and roadmap interacting with Senior Manufacturing Executives, including C-Suite, and execute selling experience across the Smart Manufacturing Digital Thread.
• Understand product development and manufacturing challenges in the Semiconductor, Automotive, and EV and Battery sectors.
• Sell and deliver complex projects with a high degree of technical and functional knowledge.

Minimum Requirements:

• Must have 15 to 20 years of Industry experience with a strong grasp of manufacturing industry and technology/solutions.
• At least 5 years of consulting or system integration experience.
• Proven track record in South East Asia is crucial.
• Proven experience in carrying an individual quota and achieving targets.
• Hands-on experience in shopfloor manufacturing operations and a strong understanding of end-to-end manufacturing processes.
• Ability to articulate end-to-end digitalization messages to customers and map Accenture technology to customer requirements and vision.
• Demonstrated capability to be a trusted advisor for clients within new or existing customers at various organizational levels.
• Practical experience with Manufacturing Planning, MES, Quality, Scheduling, Plant and Process Simulation, and Manufacturing Intelligence software in the Semiconductor, Automotive, and EV and Battery sectors.
• Experience working with clients in IoT/IIoT and Industry 4.0-based solutions.
• Experience with cloud-based technologies and deployment on-premise and in the cloud.
• Proven written and presentation development skills, with strong skills in MS Excel, PowerPoint, and Tableau.
• Strong data and integration skills, with the ability to develop and implement data integration strategies.
• Proven experience with smart manufacturing, Digital Twin technologies, and AI for manufacturing applications.
• Demonstrated experience with SAP Digital Manufacturing, Siemens OpCenter, AVEVA, and SAP Production Planning.
• Deep understanding and experience with ISA 95, RAMI 4.0, UNS, IT-OT Integration, PLC, SCADA, and Historian systems.
• Knowledge of the intersection of supply chain, manufacturing, and engineering.
• Extensive experience with industrial automation, instrumentation, and control systems.
• Proven experience in managing greenfield and brownfield factory projects from design to commissioning and sustenance.
• Ability to multi-task and align with mid/upper-level management and technical users.
• Approximately 50% travel.
• BA/BS degree required.

Preferred Qualifications:

• Multi-solution and multi-industry experience.
• MBA preferred.
• Six Sigma Black Belt and LEAN manufacturing expertise.
• Lead or actively involved in digital transformation and large systems implementation (e.g., PLM, MES).

Job Description

• Industry/ Organization Type: Chemical Distributor
• Position Title: Production Admin Coordinator
• Working Location: West (Nearest MRT: Joo Koon) – Walking distance to the company
• Working Hours: 5 days (Monday to Friday: 8 am-5.30 pm)
• Salary Package: Up to SGD 2200 + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain production records, including material stock records.
• Coordinate and confirm goods receiving and outgoing documents with the warehouse and QC departments.
• Assist QC by printing and filing Certificates of Analysis (COA) and Globally Harmonized System (GHS) Safety Data Sheets (SDS).
• Coordinate delivery orders from customer service officers, collect delivery orders from drivers, and organize them.
• Collect delivery tickets from drivers and file them accordingly.
• Prepare regular inventory lists of goods using the SAP system.
• Oversee goods receiving and update records in the SAP system.
• Create manufacturing orders and batch reports for specific customers.
• Print product labels and manage all product label templates.

APPLY NOW!!!

• Min. O level
• Min. 1 year of working experience in the related field
• Able to start work on short notice

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68723 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Production Assistant/ Production Coordinator
• Working Location: North (a few bus stops away from Canberra MRT)
• Working Hours: Monday to Friday, 8.30am to 5.30pm
• Salary Package: Basic + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Request raw materials daily from the warehouse and suppliers according to the required schedule
• Monitor daily consumption of raw materials and warehouse inventory
• Coordinate with Purchasing and Suppliers on order placements and delivery schedules
• Oversee daily inventory on the Production Floor (PF)
• Manage and control a portion of label bags
• Prepare month-end stock report for the production floor
• Perform other duties as assigned

APPLY NOW!!!

• At least GCE “O” Level or its equivalent.
• Minimum 1 year of related working experience in manufacturing environment would be a plus.
• Training provided to inexperienced candidates.
• Computer literate, especially MS Office (Excel)

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70650 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Avensys is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail, and supply chain.

We are currently looking to hire L2 Production Support. This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance.

JOB RESPONSIBILITIES:

Junior L2 Production Support (Java-base)

· Recent experience in working with Java J2EE applications

· Experience in application support role for min 1 years for support. Or Developers willing to learn with good knowledge of Java, Unix, SQL

· Experience in programming languages such as JAVA/J2EE.

· Experience in Unix commands , SQL queries

· Knowledge of web applications, batch jobs, JBOSS, MariaDB, SQL, Shell

· Knowledge of Job scheduling, MQ setup , C:D setup experience is a plus

· Exposure to banking industry is a plus

· Dynamic individual with thirst to learn

· Strong team player with excellent inter-personal skills

· Ownership oriented and ability to meet SLAs with no compromise on the quality of the work

REQUIREMENTS

· Bachelor’s Degree, or equivalent experience, and proven & demonstrable skills and experience.

· Fresh graduates from local Universities and Polytechnics from 0 to 1 year are welcome

· Must be graduate from IT or Computer Science

· Must have IT background

· Need to have eagerness to learn and perform with commitment

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression.

To submit your application, please apply online or submit your CV to [email protected]. Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS

Consultant Name: Preethi Kanthappan

Avensys Consulting Pte Ltd

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and Avensys' privacy policy.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Production Operator / Fabricator
• Working Location: Woodlands
• Working Hours: 5.5 days (Mon - Fri, 8.45 am - 6.45 pm, Sat, 8.45 am - 2.15 pm)
• Salary Package: Basic salary up to $2,200 + Allowance + OT + AWS + Variable bonus
• Duration: Permanent Role

Key Responsibilities

• Cut large stone slabs to specific sizes using bridge-cutting machines.
• Operate profiling and polishing machines to shape and finish stone surfaces.
• Cut and polish sink holes according to templates.
• Use portable power tools to grind and polish stone edges.
• Mix and color match resin glue to blend with various stones.
• Apply sealant on natural stones like Granite after fabrication.
• Inspect the finished work to ensure quality.
• Clean equipment and the work area after completing tasks.
• Collaborate with co-workers, team leaders, and the Production Supervisor to meet production and quality standards.

APPLY NOW!!!

• Able to work independently with minimal supervision.
• Experience with CNC machines is an advantage.
• Able to read and follow drawings and diagrams is advantageous
• Able to commit OT when needed
• Physically fit and able to handle heavy products
• Candidates without experience are welcome to apply, training will be provided

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69317 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Production (Manufacturing)
• Position Title: Production Engineer / Executive
• Working Location: West Region
• Working Hours: Monday – Friday, 7.30 am – 5 pm
• Salary Package: Up to $4,000 + AWS + VB
• Duration: Permanent

Key Responsibilities

• Organize, monitor, and ensure manufacturing processes run efficiently with minimal costs using manpower, equipment, facilities, materials, and capital wisely.
• Start, implement, and manage process improvement programs based on best practices in the metal drum industry, focusing on productivity and product quality.
• Ensure all manufacturing processes comply with all regulatory and statutory requirements.
• Collaborate with the HR department to address employee grievances promptly.
• Conduct employee performance reviews to gauge the competency, knowledge, and contribution of maintenance technicians and engineering staff.
• Maintain work safety practices and continually enhance safety records by addressing physical safety issues and employee safety attitudes.
• Keep all areas clean and organized.
• Evaluate, train, and maintain individual skills to stay updated with the best engineering management practices.
• Ensure timely submission of overtime records to the HR department for monthly salary calculations.
• Establish and prepare process documentation, such as work instructions, process specifications, and assist with the quality plan.
• Prepare reports, analyse data, and make recommendations to improve plant operations and solve production issues.
• Ensure subordinates are trained, equipped, and motivated to accomplish the maintenance program safely, timely, and cost-effectively.
• Communicate regularly with all production and maintenance teams to ensure good two-way communication about production and maintenance issues.
• Assist in hiring production personnel.
• Maintain and update operating manuals for all manufacturing equipment and processes.
• Perform any other projects or tasks assigned by the HOD/Management.

APPLY NOW!!!

• Diploma or Degree in Manufacturing, Electrical, Mechanical, or Engineering discipline.
• Minimum 5 years of experience in a manufacturing environment.
• Ability to supervise and lead subordinates.
• Willingness to work after hours or on non-working days.
• Ability to work under pressure.
• Computer literate.
• Knowledge of ISO standards is a plus.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69178 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturer
• Position Title: Machine Operator (Maintenance & Production)
• Working Location: West – Boon Lay (Nearby Jurong Shipyard)
• Working Hours: 5.5 days (Mon to Fri: 8 AM – 5 PM, Sat: 8 AM - 12 PM)
• Salary Package: Up to SGD2800 + OT + Travel Allowance + AWS + Performance bonus
• Duration: Permanent

Key Responsibilities

• Read and follow job orders
• Determine the required quantity to meet daily output
• Prepare and set up machines for production – clean, checking etc.
• Ensure to carry out machine operation and maintenance in good and safe working conditions
• Control and run the machine to the fullest extent
• Being able to identify any faults or problems in operations or maintenance of machines and troubleshoot arising issues
• Inspect the machine outputs for process and quality control
• Provide detailed reports and logs on the work done daily
• Keep up with safety requirements and maintain a safe work setting at all times
• Proposing improvements to the process or machines as needed
• Reporting safety hazards within the work environment
• Debagging activities and packing products in 25kg HL and jumbo bags

APPLY NOW!!!

• Min. N Level
• Min. 2 years of working experience in the manufacturing industry or relevant field
• Able to do repetitive tasks; detail-oriented; understanding of industry and safety standards
• Possess basic knowledge of PC, general maintenance, and repair tasks
• Comfortable to work OT
• On-Job training provided

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67062 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Role:

You are a Reckless Ericka ambassador with a passion for our products.

You are a driven individual with the ability to be hands-on, have keen eye for details and are open to giving and receiving feedback.

You will play a crucial role in being exceptionally creative and work alongside the Designer to support areas in Sourcing and Production.

Key Responsibilities(Production):

• Support logistical needs via tracking, receiving packing and unpacking of samples shipments.
• Manage production sample fitting and photoshoot samples to ensure that tasks are executed timely and accurately.
• Attend any quality complaints and feedback, investigate issues, and ensure timely responses.
• Receiving and processing Orders, new stock, replenishments, returns, damages and transfers, as well as all stock-take exercises (studio).
• Opening, conduct quality check and packing new stocks to ensure that it meets Reckless Ericka's standards and specifications.
• Investigate defect issues with Designer.
• Ensure stocks tally online and onsite.
• Ensure overall tidiness and housekeeping of stock baskets and studio sales floor.

Key Responsibilities(Designer's Assistant):

• Have a user-centric, thoughtful approach to gathering insights (through focus sessions and surveys) and solving for customer needs
• Understand our market, targeted customer personas, and good design principles through research and customer studies.
• Prepare moodboards, designs, sketches and technical packs for collection development.
• Keep all tracking systems promptly updated providing effective visibility to the Designer.

Requirements:

• Weekdays (except PH), adjustable hours as long as present during our core working hours - 8+1h between 8am to 8pm.
• Effectively bilingual in English and Mandarin (spoken).
• Experience in fashion or creative related studies.
• Have a good understanding of Reckless Ericka's creative vision and our target customers.
• Proactively acquiring knowledge regarding company general information, fashion news, new product information, customer feedback and staff communication.
• Good working knowledge of Adobe Photoshop and Illustrator.

How to Apply:
Please submit your CV, portfolio (if applicable), and a cover letter detailing your relevant experience and why you’re the perfect fit for our team.

Email to: [email protected]

Please state the positon you are applying.

We thank all applicants for their interest; however, only shortlisted candidates will be contacted.

• Command and control operations in the production line.
• Ensure that the daily targets / KPIs are met.
• Ensure that parts manufactured were in line with planner's need.
• Improve operational processess to enhance efficiency / productivity so as to meet standard cycle time.
• Eliminate unnecessary scrap.
• Maintain all machines to run at their fullest capabilities and reduce down time.
• Drive for continuous improvement in the line.

WORKING VENUE - PASIR PANJANG

PRINT PRODUCTION MANAGER

1. Manage day to day print production operations including scheduling, resources and workflow.

2. Ensure that all print production processes are running smoothly and efficiently.

3. Coordinate with creative and marketing teams to resolve any issue or challenges that may arise.

4. Develop and implement best practices and new processes to increase efficiency/quality.

5. To report regular updates to the creative heads with regards to the particular project.

6. To follow strict instructions from creative team on specific requirement on each project to ensure the desired result.

7. Develop and maintain strong relationships with suppliers and partners in the print industry both in Singapore and oversea.

8. Manage budget and timelines.

9. To attend and be punctual in meetings.

PRINT PRODUCTION MANAGER JOB QUALIFICATION AND SKILL SET

1. Proficient in spoken and written English/Mandarin.

2. 10 years experience in the print production industry.

3. Bachelor’s degree in graphic design, printing techniques or related field.

4. Proficient with print production software and technology.

5. Strong project management and organisational skills.

6. Excellent in negotiation and communication.

7. Strong attention to detail and quality control.

8. Ability to work under pressure and meet timelines.

9. Ability to travel.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Production Planner / Materials Planner
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM – 6 PM)
• Salary Package: Basic Salary up to $4,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Material planning based on production requirement
• Plan and manage inventory at the optimal level
• Monitor production schedule to meet on-time delivery
• Work with the testing team and arrange production staff to work according to the production schedule
• Other ad-hoc duties as assigned

APPLY NOW!!!

• Minimum Diploma in Manufacturing/Production/Electronics Engineering
• Minimum 1 year in the electronics manufacturing industry
• Able to communicate and work closely with internal customers, purchasing team and sub-contractors
• Material planning for production requirement
• Experience with ERP and MRP

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65258 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Production Planner / Materials Planner
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM – 6 PM)
• Salary Package: Basic Salary up to $4,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Material planning based on production requirement
• Plan and manage inventory at the optimal level
• Monitor production schedule to meet on-time delivery
• Work with the testing team and arrange production staff to work according to the production schedule
• Other ad-hoc duties as assigned

APPLY NOW!!!

• Minimum Diploma in Manufacturing/Production/Electronics Engineering
• Minimum 1 year in the electronics manufacturing industry
• Able to communicate and work closely with internal customers, purchasing team and sub-contractors
• Material planning for production requirement
• Experience with ERP and MRP

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65258 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

(Technical Specialist/ Equipment technician/ Manufacturing Technician/ Production/ Maintenance Technician/ Engineering Assistant/ Assistant Engineer/ Service)

1 vacancy - Afternoon Shift: Mon - Fri 3pm - 11pm / Sat: 1pm-7pm

• Permanent Position / MNC/ Near Woodlands MRT/ Urgent Hiring!!
• AWS, Annual Leave, Medical & Dental Benefit
• Attendance Allowance + Shift Allowance, OT
• Training will be provided

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities:

• To carry out repair & maintenance of in-house Production Automation Machines
• To provide support to ensure production machines & equipments is repaired timely.
• To attend to unforeseen machine breakdown.
• To carry out Preventive Maintenance (PM) as scheduled.
• To support all Automation Integration.
• To recommend improvement to enhance Productivity & Yield.
• Compliance to all regulatory and in house system requirements especially for medical and automotive customers
• Prepare the automation documents, reports and records on daily basics

Requirements

• NTC in Engineering-related discipline, preferable in Mechanical/Electrical/Electronics/Plastic technology.
• 1-3 years relevant experience in Machine repairs and maintenance
• Good team player with positive working attitude

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Ryan Tan (EA Reg. no.: R23116422)

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743

[email protected] I www.rightrecruit.com.sg

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

Working Location :Sembawang MRT near

Medical equipment Manufacturing

Base salary: S$1800-S$2300 (depending on experience)

Provided Halal Restaurant for 2 meal

have AWS + Bonus

can go back and forth from JB to SG, and the factory Bus will be delivered to the woodland check point

Working hours: Monday to Friday

Location: Yishun

13 days of annual leave + 14 days of sick leave per year

Flexible benefits - insurance, medical, dental and physicals

- Team lead experience in medical factory production lines will be given priority

Scope of work:

- Do production planning, assist supervisor in arranging personnel allocation in production department, and also need to participate in production line operations

- Ensure that the production volume is up to standard and the machine operation of the production line is smooth

- Participate in employee training and implement instructions and safety standards assigned by the company

- Training will be provided for the above work scope, and you must be willing to actively cooperate and learn

EA License 23C1570
EA Personnel R1547369
Recruitment Firm By VISI Intergroup Pte. Ltd.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Production Engineer
• Working Location: Tuas (Transport provided)
• Working Hours: 5.5 days (Mon - Fri. 8.00 am - 5.00 pm; Sat, 8.00 am - 12.00 pm)
• Salary Package: Basic salary up to $5,000 + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Coordinate all aspects of assigned tasks to ensure efficient production flow.
• Provide monthly production input and identify areas for improvement.
• Offer technical leadership for new and existing challenges.
• Create and maintain process instructions and documentation.
• Develop, record, and present reports for monthly production meetings.
• Perform assembly tasks and guide technicians/operators as needed.

APPLY NOW!!!

• Diploma or Degree in Engineering or a related professional certification.
• Proficient in Microsoft Office.
• Able to work with minimal supervision.
• Effective team player with good communication and presentation skills.
• 2-5 years of relevant experience in related industry.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69139 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Production (Manufacturing)
• Position Title: Production Engineer / Executive
• Working Location: West Region
• Working Hours: Monday – Friday, 7.30 am – 5 pm
• Salary Package: Up to $4,000 + AWS + VB
• Duration: Permanent

Key Responsibilities

• Organize, monitor, and ensure manufacturing processes run efficiently with minimal costs using manpower, equipment, facilities, materials, and capital wisely.
• Start, implement, and manage process improvement programs based on best practices in the metal drum industry, focusing on productivity and product quality.
• Ensure all manufacturing processes comply with all regulatory and statutory requirements.
• Collaborate with the HR department to address employee grievances promptly.
• Conduct employee performance reviews to gauge the competency, knowledge, and contribution of maintenance technicians and engineering staff.
• Maintain work safety practices and continually enhance safety records by addressing physical safety issues and employee safety attitudes.
• Keep all areas clean and organized.
• Evaluate, train, and maintain individual skills to stay updated with the best engineering management practices.
• Ensure timely submission of overtime records to the HR department for monthly salary calculations.
• Establish and prepare process documentation, such as work instructions, process specifications, and assist with the quality plan.
• Prepare reports, analyse data, and make recommendations to improve plant operations and solve production issues.
• Ensure subordinates are trained, equipped, and motivated to accomplish the maintenance program safely, timely, and cost-effectively.
• Communicate regularly with all production and maintenance teams to ensure good two-way communication about production and maintenance issues.
• Assist in hiring production personnel.
• Maintain and update operating manuals for all manufacturing equipment and processes.
• Perform any other projects or tasks assigned by the HOD/Management.

APPLY NOW!!!

• Diploma or Degree in Manufacturing, Electrical, Mechanical, or Engineering discipline.
• Minimum 5 years of experience in a manufacturing environment.
• Ability to supervise and lead subordinates.
• Willingness to work after hours or on non-working days.
• Ability to work under pressure.
• Computer literate.
• Knowledge of ISO standards is a plus.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69178 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Intern, Video Creative Production

Job Description

We are seeking a motivated and creative intern to join our team. This role offers a unique opportunity to gain hands-on experience in a fast-paced, creative environment. Our company is a fast-growing international company specializing in the distribution of electronics products. We are currently producing TV commercials and digital ads for our products.

As a Creative Intern, you will assist in various projects, contributing to the development and execution of creative concepts.

Key Responsibilities:

• Assist in the creation and development of content for various platforms, including social media, websites, and marketing materials.
• Support the design team in brainstorming and conceptualizing creative ideas for client projects.
• Participate in photoshoots and video productions, providing support with setup, styling, and post-production tasks.
• Conduct research and gather inspiration to inform creative strategies and design concepts.
• Assist in the production of digital assets, including editing photos, videos, and graphics.
• Collaborate with team members to ensure consistency and quality across all creative outputs.
• Help manage and organize creative assets and project files.

Qualifications:

• Currently pursuing or recently completed a degree in Graphic Design, Visual Communications, Marketing, or a related field.
• Proficiency in Adobe Creative Suite (Photoshop, Illustrator, InDesign, Premiere Pro).
• Basic understanding of photography and videography principles.
• Strong attention to detail and a keen eye for aesthetics and visual composition.
• Excellent communication and teamwork skills.
• Ability to manage multiple tasks and meet deadlines in a fast-paced environment.
• Enthusiastic, proactive, and eager to learn.

The intern will work in the Production department of Keystone Cable factory. He will report to the Plant Manager (mentor) and work alongside engineers / technicians to identify opportunities for factory operations efficiency and productivity improvement.

Expected tasks / responsibilities

1. Job shadow / On-job training, OJT of Production Engineer to understand cable manufacturing process.
2. Problem understanding of current methods of manual production data collection with the intent of improving the process flow and to digitize where possible.
3. Data acquisition of shop floor data to set baseline targets for production improvement
4. Research and testing of hypothesis on production parameters we want to improve
5. Project management of one or two projects to improve factory productivity / efficiency using existing or acquired skillsets.

Learning outcomes and objectives

1. To allow intern to gain a good understanding of the work and responsibilities of a production engineer in a factory.
2. To project manage one or two projects that tackle factory productivity and efficiency problem statements.
3. To apply and extend intern’s skillsets on shop floor data collection and analysis with the objective of improving existing factory systems.
4. To allow company and intern to assess compatibility for potential collaboration opportunities in the future.

Requirements

Personal traits requirements: Respect for individual, Team player, Good communication skills, Willing to accept new challenges and learn.

Technical requirements: Industrial control and automation, Power systems, PLC systems, Basic programming skills will be a plus: Python, SQL database, MS Office proficiency

*Kindly indicate the period you are able to commit to the internship in resume

*Only available for internship period beyond August

Job Description & Requirements

• Assist the Factory Production Manager in supervising the factory/production Team Leaders and workers by overseeing fabrication work for quality consistency and operation efficiency, based on AutoCad drawings and Designs and prepare weekly production plan.
• Ensure all workers follow industry standard health and safety guidelines with weekly WSH safety meeting.
• Make sure daily work plan, PPE, goods arrival and unloading are carried out smoothly , timely, and completely.
• Innovate and automate for improved production output and overall efficiency with new automated or robotic machines and work flow.
• Liaise and manage fabricated products are ready with project engineers for installation at sites.
• Check Team Leaders record of materials in and out of factory to project sites, all stock and inventory is maintained with accuracy and up to date.
• Organise and upkeep factory storage and movement of inventory are smooth and efficient.
• Assist to source better and cost savings materials from overseas and liaise with overseas suppliers for stock replenishing.
• Involve in the annual ISO and bizsafe renewal.
• Improvise designs for overall efficiency of system parts and communicate with key personnel.
• Manpower planning and workers training to make sure workers are equipped with relevant knowledge and skills.
• Need autocad, fabrication, welding knowledge to check drawings and making sure welders are fabricating correctly.
• Assist purchaser to source for materials overseas.

Requirements :

• Minmum Diploma in either mechanical, Electrical or Construction Engineering or other relevant discipline.
• Required skill(s), MS Office, MS Project AutoCad.
• 3 to 5 years work experience in construction sites.
• Responsible team player with the ability to work independently in challenging projects and timelines.

Job Description & Requirements

• Assist the Factory Production Manager in supervising the factory/production Team Leaders and workers by overseeing fabrication work for quality consistency and operation efficiency, based on AutoCad drawings and Designs and prepare weekly production plan.
• Ensure all workers follow industry standard health and safety guidelines with weekly WSH safety meeting.
• Make sure daily work plan, PPE, goods arrival and unloading are carried out smoothly , timely, and completely.
• Innovate and automate for improved production output and overall efficiency with new automated or robotic machines and work flow.
• Liaise and manage fabricated products are ready with project engineers for installation at sites.
• Check Team Leaders record of materials in and out of factory to project sites, all stock and inventory is maintained with accuracy and up to date.
• Organise and upkeep factory storage and movement of inventory are smooth and efficient.
• Assist to source better and cost savings materials from overseas and liaise with overseas suppliers for stock replenishing.
• Involve in the annual ISO and bizsafe renewal.
• Improvise designs for overall efficiency of system parts and communicate with key personnel.
• Manpower planning and workers training to make sure workers are equipped with relevant knowledge and skills.
• Need autocad, fabrication, welding knowledge to check drawings and making sure welders are fabricating correctly.
• Assist purchaser to source for materials overseas.

Requirements :

• Minmum Diploma in either mechanical, Electrical or Construction Engineering or other relevant discipline.
• Required skill(s), MS Office, MS Project AutoCad.
• 3 to 5 years work experience in construction sites.
• Responsible team player with the ability to work independently in challenging projects and timelines.