• To work in accordance wtih company policies, production plan, product specifications and management guidance
• Operate and monitor machinery which distillate, filter, separate, heat or refine chemicals, to blend,mix, process a wide range of chemical products
• Handover and takeover of plant status, routine check on plant, ensure all bleeders and vents are close
• Console technician to handover and takeover of plant status face to face at control room, check on MOS, screen through all pages for abnormality and check status of fire panel
• Report any leaks, deviation, and abnormality and unsafe conditions in the plant to Team Leader
• Perform process start-up, normal operation and shut-down in accordance to work instructions, ensure no deviation on process and safety
• Monitor processes, taking samples and performing routine chemical and physical tests of products and recording production data. Ensure products are meeting product specifications
• Line up for tank transfer and monitor transfer of products in conformance with safety procedures
• Logistic operation (Loading/unloading ISO tankers, road trucks, drumming, etc)
• Troubleshooting of equipment malfunctions, carrying out routine operating verification tests, filter cleaning, minor piping/spool connection/disconnect and request for maintenance if needed
• Prepare equipment for maintenance, LOTO, check for leaks and gas test, De LOTO, AFTT, test run and put equipment back in service
• Assess the area or equipment before signing the permit assessor portion
• Respond to process upsets, leaks and emergency situations (as ERT team member)
• To support maintenance activities/other departments/shifts on shortage of manpower
• Monitor, report and intervene any unsafe conditions and situations
• Raise concern on MOS, safety critical equipment and MOC/PSSR as required
• Other duties as assigned
• Good team worker, good communication skills, safety/process knowledge and troubleshooting skills are prerequisites
• Work 12-hour shifts and be physically fit
• NITEC in Chemical Process Technology with 1 to 5 years of working experience in Chemical/Pharmaceutical, Oil and Gas manufacturing industries
• Good understanding in general EHS practices
• Fluent in English (written and verbal)
• Candidates need to be trustworthy, hands-on, take full ownership/responsibility of their roles and responsibilities. Can-do attitude, flexible approach and provding full support to the Site Management team are key.

Production Supervisor will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.

2. Good communication skills with Ship Owners and Superintends.

3. Good time Management and work Independently.

4. To perform any other duties & Responsibilities assigned by superiors from time to time.

5. Ability to demonstrate and implement cost -saving measures.

6. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Knowledge of MS office.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

Production Supervisor will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.
2. Good communication skills with Ship Owners and Superindents.
3. Good time Management and work Independently.
4. To perform any other duties & Responsibilities assigned by superiors from time to time.
5. Ability to demonstrate and implement cost -saving measures.
6. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Knowledge of MS office.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

Production Supervisor will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.
2. Good communication skills with Ship Owners and Superindents.
3. Good time Management and work Independently.
4. To perform any other duties & Responsibilities assigned by superiors from time to time.
5. Ability to demonstrate and implement cost -saving measures.
6. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Knowledge of MS office.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

• Need experience in Architectural metal works, metal cladding, Ceiling panels, Glass Wall, Glass Railing, Sky lights, Stainless Steel & Aluminium works.
• Forecast , Plan and schedule production orders.
• Material planning, Requisition of materials and maintenance of factory materials.
• Responsible for order confirmation based on material and capability availability.
• Plan, control and coordinate with purchasers on material deliveries to avoid high stock inventory.
• Monitor material availability for production continuity.
• Periodically reporting.
• Diploma/ degree holder in Supply Chain Management.

For interested applicants, please apply online or send your resume in WORD format to [email protected] & [email protected]

Thank you for your application but we regret that only shortlisted candidates will be notified

Position Summary

Production Supervisor is responsible to drive and meet the daily targets set, in addition to ensuring that the line complies with the SOP and has a Safety-First mindset.

Candidates with experience in fast paced semiconductor manufacturing environment are encouraged to apply for this position.

Key Responsibilities:

• Command and control the operations in the production line.
• Present daily production indices in module meetings and highlighting key priorities for the Engineering Team.
• Analyze WIP profile to minimize constraints in equipment, process, or manpower.
• Improve operational processes to enhance efficiency / productivity to meet standard cycle time.
• Address issues that affect bottlenecks by working with various departments.
• Drive for continuous improvement in the line.
• Actively lead and participate in 6S and kaizen events.
• Recommend and implement measures to motivate employees and to encourage employees to recommend ways to improve process, quality, safety and efficiency.
• Responsible for staff scheduling to include work assignments/rotations, employee training, shift rotations.
• Resolve or addresses production problems as they arise.
• Counsel and discipline production employees who fail to perform or violate company policies.

Requirements:

• At least 5 years of relevant experience in semiconduction production.
• Min. diploma qualification and above.
• Positive and can-do attitude as well as willingness to accept challenges.
• Demonstrate commitment to work and able to perform shift duties.
• Good analytical skills and initiative.

You are responsible for the day to day management of our custom-build job shop fabrication environment, to maximize productivity and cost-savings. This will require you to plan, implement and monitor work schedules and supervise the production process with various parties. You will also need to evaluate and resolve any production-related discrepancies and problems, as well as ensure meeting all permits required by regulatory authorities.

Responsibilities

• Work with the production team to innovate and improve existing fabrication processes.
• Develop and implement quality control measures to repeatedly deliver desired results.
• Oversee the maintenance of factory and equipment for maximum safety and efficiency.
• Adhere to statutory requirements and company enforced rules and regulations
• Coordinate with project personnel to receive/clarify customers’ requirements.
• Apply problem solving skills and work with production supervisors, draftsmen to derive fabrication solutions upon receipt of design drawings.
• Value engineer solutions to optimize cost savings.
• Plan production processes and allocate/deconflict resources for scheduling delivery.
• Track production output, cost and progress to ensure quality, budget and delivery targets are met.
• Coordinate and work with specialist vendors to ensure quality and project requirements are met.
• Lead, organize or participate in daily discussions to ensure smooth production operations.

Requirements

• Minimum Diploma or Bachelor degree in Engineering;
• At least 2+ years proven experience in production/industrial engineering; managerial experience a plus
• Familiarity with CAD software
• Proficiency using Microsoft Office
• Possess a wide breadth of knowledge in Engineering & materials know-how
• Excellent communication skills
• Ability to maintain positive vendor and client relationships
• Strong coordination skills, organized and an energetic people-person with an eye for details
• Self-driven, results-oriented, thorough and is able to work well under pressure
• Strong leadership, communication and interpersonal skills
• Strong analytical and problem-solving skills

We are a semi-auto/Auto Food factory in Mandai producing yoghurt and milk products.

Looking for a Manufacturing/Production technician with experience operating,troubleshooting equipment.Able to work in dynamic,high pressure environments with attention to detail and good focus.

Ability to follow SOPs and protocols without any deviation,able to work independantly and quick learner.Mechanical with some electrical knowledge.

Working hours: 8am to 5.30pm

7 Mandai Estate(Working location)

Roles & Responsibilities

• Set up, operate, and monitor machines and equipment to ensure efficient production.
• Adjust machine settings for different production runs
• Maintaining Production Quality
• Packing of materials
• Assist to unload goods and store properly
• Any other assignments assigned by supervisor

Responsibilities:

• Operate machines and handle materials in the production line.
• Perform manual work for packing and assembly of goods
• Any other task assigned by the supervisor.

Requirements:

• Physical fit
• Able to work overtime
• Able to start work as soon as possible
• Training will be provided

Benefits: $1600 + OT + Bonus + Medical benefits

Responsibilities:

· Assist the supervisor to schedule jobs for truck attendants and production team

· Manage all aspects of the day-to-day production activities to ensure that daily production targets are achieved

· Maintain proper documentation and tracking of employee deployment, attendance and leave management

· Work closely with Sales and Operations Department on the loading of goods for export

· Ensure all production related machineries and equipment are properly maintained

· Ensure Production Site complies with Work Safety and Health (WSH) so that housekeeping, quality, safety, occupational hygiene, and environmental protection requirements are met

· Work with Safety Officer to ensure all Safety Compliance measures are adhered to

· Ensure cleanliness of the Production/operation area and dormitory

· Assist with other ad-hoc duties assigned by superior

Requirements:

· Minimum 2 years working experience

· Experience in handling machineries

At present & future, we do not require assistance from recruitment agencies. All applications should be submitted directly by candidates.

• Forecast , Plan and schedule production orders.
• Material planning, equisition of materials and maintenance of factory materials.
• Responsible for order confirmation based on material and capability availability.
• Plan, control and coordinate with purchasers on material deliveries to avoid high stock inventory.
• Monitor material availability for production continuity.
• Periodically reporting.
• Diploma/ degree holder in Supply Chain Management.

For interested applicants, please apply online or send your resume in WORD format to [email protected] & [email protected]

Thank you for your application but we regret that only shortlisted candidates will be notified.

ABOUT WORLD TABLE TENNIS

At World Table Tennis (WTT), we are revolutionizing the sport we love and pushing the boundaries of what's possible through world-class entertainment events and engaging fan-centric content. With an unwavering focus on innovation at our core, we are committed to leading the global table tennis industry and inspiring the next generation of fans and players worldwide.

WTT PRODUCTION COORDINATOR

World Table Tennis (WTT) is a commercial entity created by the ITTF to grow the professionalisation of table tennis by running ITTF’s commercial and events business. Taking a new, innovative and entrepreneurial approach to how table tennis should manage its competition platform and positioning, WTT has been tasked with re-imagining a new professional event structure, re-energising the entertainment and fan experience, and re-defining the new era.

WTT is seeking a detailed and organised individual who has good interpersonal skills and will be working closely with a team of production professionals.

RESPONSIBILITIES:

Logistical Coordination

• Support production logistics for overseas events, including travel arrangements, visa processing, accommodation bookings, and onsite office setup.
• Coordinate live remote streaming productions, liaising with commentators, suppliers, and clients.
• Research travel regulations, including work permits and medical requirements.

Operational Support

• Assist in managing production budgets, ensuring cost efficiency in all aspects of event production.
• Prepare pre- and post-event documentation, such as budgets, call sheets, commentary schedules, and reports.

Project Assistance

• Collaborate with the Production Manager and Producers on planning and executing production schedules to meet WTT’s standards and timelines.
• Participate in risk management tasks, including drafting risk assessments and ensuring compliance with safety protocols.

Team Collaboration

• Provide administrative and logistical support to senior team members.
• Coordinate with freelance staff and contractors, assisting in onboarding and ensuring adherence to production guidelines.

Supplier Coordination

• Assist in obtaining quotes and managing relationships with third-party vendors.

Others

• Any other duties as assigned by Management.

REQUIREMENTS:

Essential:

• Bachelor’s degree in Film Production, Media, Communications, or a related field.
• Minimum 1–2 years of experience in production coordination, ideally in sports broadcasting or live events.
• Familiar with budgeting, scheduling, and basic project coordination tools.
• Strong organizational skills and the ability to handle multiple tasks under tight deadlines.
• Basic understanding of risk assessment and compliance processes.
• A teamplayer with effective communication skills.
• Experience with production management software and tools.
• Basic knowledge of audiovisual and broadcast equipment is an advantage.
• Willingness to travel and work flexible hours, including weekends and holidays.

Desirable:

• Passion for sport and business;
• Ability to work in multiple languages, with preference for Southeast Asian Languages.

HOW TO APPLY

Submit CV and cover letter to [email protected] with the email subject titled “WTT Production Coordinator”.

Due to the high number of candidate applications expected, only those who are shortlisted will be contacted.

Job Descriptions:

• Performs machine and process setup of die attach and moulding machines
• Able to performs machine troubleshooting.
• Performs mechanical alignment
• Ensure that the quality product is manufactured on schedule within the customer’s requirement
• Work with Cross functional Departments to resolve function, safety, quality and productivity related issue and improvement.

Requirement:

• Male
• Ability to work under pressure
• Able to work independently
• Processed basic technical knowledge in machine set up and troubleshooting.
• Minimum 2 years experiences in semi-con production.
• Preferably with 2 years hand on experience in machine set-up and troubleshooting of die attach bonder.
• Able to travel overseas whenever is needed.Able to work long hours
• Responsible, Self-motivated, Committed and Good interpersonal skills
• Must be willing to work in the cleanroom environment: wearing jumpsuits, safety helmet and safety shoes (only at customer side)
• Educational/ Certification Requirement: NITEC / Higher NITEC/ Professional Certificate or its equivalent, Diploma in Mechanical Engineering

Overview

As a Production Engineer, you are to assist the Production Manager in overseeing the production operation and work out schedules and plans, monitor progress, forecast demand of resources, and manage all the technical activities aiming at assuring smooth project delivery and optimization of production performance from conception to completion. You are to adhere to company's Integrated Management System (IMS) and compliance to applicable Singapore Standards and Regulations in the Industry.

Responsibilities

1. Plan, manage and coordinate projects to ensure that the projects are completed on time, within budget and of highest quality.
2. Work closely with clients, suppliers, consultants, contractors, and relevant authorities in projects managed.
3. Plan, develop, execute, monitor project schedule, resource plan and budget.
4. Monitor compliance to applicable codes, practices, QA / QC policies, performance standards and specifications.
5. Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status.
6. Supervise team of Supervisors, foreman and workers in the production operations to ensure quality, productivity, and safety.
7. Set daily/ weekly/ monthly objectives and communicate them to production team.
8. Cooperate and communicate effectively with project stakeholders to provide assistance and technical support.
9. Review engineering deliverables and initiate appropriate corrective actions.

Overview

As a Production Engineer, you are to assist the Production Manager in overseeing the production operation and work out schedules and plans, monitor progress, forecast demand of resources, and manage all the technical activities aiming at assuring smooth project delivery and optimization of production performance from conception to completion. You are to adhere to company's Integrated Management System (IMS) and compliance to applicable Singapore Standards and Regulations in the Industry.

Responsibilities

1. Plan, manage and coordinate projects to ensure that the projects are completed on time, within budget and of highest quality.
2. Work closely with clients, suppliers, consultants, contractors, and relevant authorities in projects managed.
3. Plan, develop, execute, monitor project schedule, resource plan and budget.
4. Monitor compliance to applicable codes, practices, QA / QC policies, performance standards and specifications.
5. Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status.
6. Supervise team of Supervisors, foreman and workers in the production operations to ensure quality, productivity, and safety.
7. Set daily/ weekly/ monthly objectives and communicate them to production team.
8. Cooperate and communicate effectively with project stakeholders to provide assistance and technical support.
9. Review engineering deliverables and initiate appropriate corrective actions.
10. Check production output according to specifications.
11. Submit reports on performance and progress.
12. Enforce strict safety guidelines and company standards.
13. Ensure customer requirement are determined and met, thus enhance customer satisfaction.
14. Plan & carry out production or service under controlled conditions – including product characteristics, work instructions / standard work methods, casting schedule, material order, suitable equipment, Monitoring & Measurement (MM), release, delivery & post-delivery activities as well as propose yearly budget.
15. Perform any other duties as assigned by the Management and the designated manager.

Requirements

1. Minimum Diploma in Civil / Building / Construction / Mechanical Engineering or equivalent, with at least 3 years of supervisory level and relevant work experience in a Precast / Prefabricated Bathroom Unit (PBU) or Building & Construction environment.
2. Knowledge of precast construction practices, erection sequence, design, and visualization software such as AutoCAD.
3. Knowledge of relevant Statutory requirements and compliances.
4. Knowledge of ISO 9001, 18001 and 45001 will be an advantage.
5. Familiarity with rules, regulations, best practices, and performance standards.
6. Good interpersonal skills to communicate with people of all levels.
7. Willing to work on alternate Saturdays and Sundays or Public Holidays if required.
8. Proficient in Microsoft Office.

Job Description:

• Performs product conversion, machine & process set-up per production order / requirement

• Operates the machine & performs in-process inspection during production

• Ensures quality product is manufactured on schedule to fulfil customer’s requirement

• Assist the Engineer in performing equipment maintenance, process trouble-shooting

• Responsible for equipment repair & maintenance when required

• Ensures good housekeeping & proper segregation of wastes

• Responsible in helping the organization conserve energy & resources

• To comply with all Quality, Environmental, Health, Safety & Security Policies & procedures of the company

Qualifications / Requirements:

• ITE / Diploma in Engineering

• SPM equivalent / GCE “O” level

• Minimum 2 years of experience in manufacturing, mass production in cleanroom environment, preferably in Semi-con / Electronics industry

• Able to handle maintenance & repair tools

• Able to understand & use basic measuring equipment

Working hours:

12 hours Shift (8am - 8pm, 8pm to 8am)

Permanent Day or Night shift

Shift pattern - 3/4/4/3

• Oversea routine production and production floor cleaniness
• Ensure that products are made to quality standards
• Troubleshooting and solving issue on production floor
• Min 3 year experience
• Required basic computer skill, and language skill

Job Description: Production Supervisor (Dessert & Beverage Manufacturing)

Position Summary:

The Production Supervisor in Dessert & Beverage Manufacturing oversees the production processes for desserts and beverages, ensuring consistency in recipes, quality standards, and efficiency. This role involves managing production staff, refining recipes, and optimizing workflows to meet production targets while maintaining safety and hygiene standards.

Key Responsibilities:

1. Team Management:

Supervise, mentor, and guide production staff to ensure smooth daily operations.

Assign tasks, monitor performance, and provide training on production processes, safety protocols, and recipe adherence.

Foster teamwork and a collaborative environment to maximize productivity.

2. Production Operations:

Oversee the manufacturing processes of desserts and beverages, including ingredient preparation, mixing, cooking, portioning, and packaging.

Ensure consistency in recipes and compliance with production guidelines.

Manage production schedules to meet customer demand and minimize waste.

3. Recipe Development and Refinement:

Collaborate with R&D teams to develop, test, and refine dessert and beverage recipes.

Ensure recipes are scalable for mass production without compromising quality.

Document and maintain recipe specifications and production methods.

4. Quality Assurance and Food Safety:

Ensure all products meet company and regulatory quality and food safety standards.

Conduct routine inspections and implement corrective actions for any deviations.

Enforce compliance with HACCP, GMP, ISO, and other relevant certifications.

5. Process Improvement:

Identify opportunities to enhance production efficiency, streamline workflows, and improve product consistency.

Implement Lean Manufacturing practices and Standard Operating Procedures (SOPs).

Evaluate and improve the production of new and existing dessert and beverage lines.

6. Equipment and Maintenance:

Oversee the use and maintenance of specialized equipment for dessert and beverage manufacturing.

Coordinate with maintenance teams to ensure equipment reliability and reduce downtime.

7. Safety and Compliance:

Promote a safe and hygienic work environment by adhering to workplace safety regulations.

Train staff on hygiene practices and safety procedures specific to food manufacturing.

Investigate and report incidents, proposing preventative measures.

Qualifications:

Diploma or degree in Food Science, Food Technology, Culinary Arts, or a related field.

3+ years of experience in dessert and beverage production, with at least 1 year in a supervisory role.

Hands-on experience with recipe development, scaling, and production for desserts and beverages.

Strong understanding of food safety standards (HACCP, GMP, FSSC 22000).

Familiarity with production equipment such as mixers, blenders, and packaging machines.

Key Competencies:

Leadership and team management skills.

Creativity and precision in recipe development and execution.

Strong organizational and multitasking abilities.

Problem-solving and decision-making skills.

Proficiency in production planning tools and software.

Working Conditions:

Based in a dessert and beverage manufacturing facility, with exposure to varying temperatures and environments.

May involve shift work or overtime during peak production periods.

Adherence to strict hygiene and food safety protocols, including the use of protective gear.

This role is critical for ensuring high-quality dessert and beverage products while fostering innovation, maintaining efficiency, and meeting production goals.

Major Job Responsibilities

• Liaise with hirers and work with Venue Sales, Technical and Front-of-House teams to deliver all aspects of production needs
• Support the Venue Sales Team in ensuring hirers' needs are met
• Attend site meetings with Venue Sales personnel, generate production cost estimates for hirers and meeting notes for OVM team
• Act as liaison between hirer’s production team and OVM in-house technicians
• Manage all production needs for performances/ events assigned
• Ensure event-specific technical rider is generated for every event following discussions with the relevant
• production staff; provide cost estimates to hirers after production meetings
• Ensure hirers and technicians comply with standard operating procedures and the working environment is safe at all times
• Work closely with technical team during production, ensure technicians conduct pre-show checks before each performance and venue is safe and ready for public admittance before handing over to FOH for house
  opening
• Liaise with FOH during performance/ events
• Understand emergency plan and safety and security procedures of building to facilitate effective evacuation when required
• Close timesheets for technicians and production services account after event; submit incident reports as required
• Document and archive all relevant information, correspondence and processes for each production completed
• Engage in cross-training and functions in venue and production operations and project management
• Support school-wide events and key activities
• Adhere to SOTA’s prevailing policies and procedures
• Any ad-hoc duties as required by Reporting Officer, Management or the Organisation

Job Requirements

• Degree or equivalent
• Minimum 4 years of experience in live performance management (preferably in arts and entertainment industry)
• Possess good working knowledge of production disciplines and technical aspects of theatres and exhibition/ event spaces
• Familiar with policies and procedures in performing arts venues will be an added advantage
• Possess good working knowledge and operational skill in managing the Event Business Management System (EBMS) will be an added advantage
• Excellent customer relationship management, communication, and interpersonal skills, including strong organisational and report writing skills
• Possess positive and motivated personality with good initiative, and pro-active with a high level of commitment to meet deadlines
• Strong team player, meticulous, analytical, and resourceful with the ability to work independently
• Able to multi-task and perform in a fast-paced environment and handle complex situations calmly and professionally
• Plenty of initiative and enthusiasm and strong passion for the arts and the nurturing of youth within the arts education industry
• May be required to work at height, operate/ lift heavy equipment
• Long working hours, with frequent requirement to work on weekends and/or Public Holidays

Role: Production Support Engineer

x10 Positions

Work Location: Changi Business Park

We are seeking a dedicated Production Support Engineer professional to join our team to ensure the smooth operation of our systems and applications. The ideal candidate will have strong technical skills and be able to collaborate with various departments to support and maintain our software systems.

Responsibilities:

• Monitor and troubleshoot production issues (Linux VMs, Vendor Product, SFTP).
• Collaborate with cross-functional teams to identify and resolve production issues.
• Perform root cause analysis and provide solutions to prevent future issues.
• Create and maintain documentation related to production issues and resolutions via JIRA.
• Implement and maintain processes and procedures to improve production support.
• Provide daily, weekly, and monthly reports on system performance and issue status.
• Ensure proper deployment and release of software updates & infrastructure patches/upgrades.
• Participate in on-call rotation and respond to production issues after business hours. There are two shifts, Morning (7 AM to 4 PM) and Afternoon (2 PM to 11 PM), running 7 days a week.
• Deployments during silent hours.
• Development work within the vendor product (about 10%-20% of time).

Preferred Qualifications:

• Bachelor’s degree in Computer Science or related field.
• 2–4 years of experience in Production Support or related role.
• Strong technical skills in Java, SQL, UNIX, and scripting languages.
• Ability to troubleshoot and resolve complex production issues efficiently.
• Excellent problem-solving and analytical skills.
• Effective communication skills to collaborate with cross-functional teams effectively.
• Willingness to participate in on-call rotation.

If you are keen, please send across your updated resume to [email protected] and we can discuss to proceed further.

EA Personnel Registration Number: R1112410

Singapore Employment Agency Licence No: 11C3373

a) Dissemble various types of aircraft components

b) Perform trouble shooting, assembly, inspection and testing of aircraft components

c) Perform minor rework or call out the relevant repair scheme

d) Read and understand CMM, Service Bulletins, Standard Practices or other relevant Airworthiness Data

e) Complete the documentation and records for each component and where applicable, sign and stamp each stage of the work performed

f) Release of components to service

g) Proficient in most of the requirements for multiple products

h) Cost conscious and have a sense of urgency to complete jobs by stipulated deadlines

i) Ability to work in various areas of the shop, uses sound judgment and is a team player

j) Accept ownership for the work assigned to him and perform his job in a safe and proficient manner

k) Able to work independently with minimum supervision and possess basic problem solving skills

l) Aid in the maintenance of his personal work area, the workshop and shared facilities and equipment

m) Participate in the Continuous Improvement projects in Customer Service Department (methods) to promote efficiency and productivity.

n) Comply with all health, safety and environment (HSE) regulations as prescribed by law and company’s policies.

o) Actively participate and contribute to HSE initiatives & Corporate HSE programs and in HSE risk communications & mitigations.

p) Any other duties assigned.

• Lead and supervise the production team to meet daily production output and operational target
• Ensure the production team works in a safe environment and comply with all safety procedures
• Conduct daily toolbox briefings to create workplace safety awareness, food safety awareness and GMP awareness
• Understand production schedules and prioritize production sequence - Packaging materials and Raw materials
• Troubleshoot and problem-solve non-conformance production issues, collaborate with the maintenance team to resolve equipment malfunctions and abnormalities
• Ensure the manufacturing process remains smooth and efficient. Evaluate stations/processes of the production operation to identify bottlenecks and ensure optimum efficiency
• Maintain production records and ensure raw material/packaging/finished product are recorded timely
• Apply and advocate operating procedures and standards
• Analyse and ensure accurate recording of production data into reports and/or SAP system
• Responsible for daily production reports (including any off-specification results and investigations)
• Ensure all QA samples from production are collected and measured on time
• Responsible for the training, recruitment, attendance, and performance management of the production team

Working at a High-Tech Dairy Factory Air-Con Environment

5 day work-week

Mon-Fri 8am to 5.30pm

Duties Include:

-Packing

-Operating simple Equipment

-Laoding of Finished Products into Chiller room and Storage Area

-General Housekeeping and cleaning after production

What we require:

-Able to speak and write in English

-Able bodied and active

-Work well in Fast paced environment

Job Description

Technically skilled and detail-oriented person that can run various manufacturing / production equipment producing high-quality and strict quality control products. Production is performed in a clean room of 5000-1000PPM.

The PO will work within our production team to ensure that all products meet our company’s standards for quality, performance, and efficiency.

Machine Maintenance & Production:

• Adjust and configure the machine according to engineering specifications for production.
• Perform maintenance, install, test, and calibrate mechanical and electronic components within each machine.
• Ensure alignment, accuracy, and precision of parts and products during the production.
• Cross-training with Quality Control Department to understand both Work-in-Progress (WIP) products and Finished Goods(FG).

Quality Control & Inspection:

• Conduct pre-production checks to verify the availability and condition of the raw materials and machine.
• Perform routine inspections of machines throughout the production process to identify defects or issues.
• Document and report any inconsistencies or quality control issues to the production manager.
• Maintain and ISO 9001 and SOP compliant environment and process.

Technical Troubleshooting & Maintenance:

• Diagnose mechanical and electrical problems within machines and perform necessary repairs or adjustments.
• Follow standard operating procedures for maintenance and troubleshooting of production equipment.
• Maintain a clean, organized, and safe working environment, adhering to all health and safety guidelines.

Process Improvement:

• Work collaboratively with the production team to improve processes and efficiency.
• Provide input on machine design or assembly changes to improve performance and ease of production.
• Assist in implementing and documenting best practices for production to enhance quality and productivity.

Inventory & Material Management:

• Track inventory of all equipment, parts and materials used in the production process and report shortages.
• Ensure proper storage and handling of materials, parts, and finished products.
• Prepare and update production reports, tracking units produced, time spent, and any issues encountered.

Experience:

• Proven experience (2+ years) in machinery operation or production, preferably with screen printing machines or other manufacturing similar equipment.
• Strong understanding of mechanical and electrical systems, with the ability to read and interpret blueprints and technical drawings.

Skills:

• Strong attention to detail and precision.
• Good critical thinking and problem-solving skills with a proactive approach to troubleshooting.
• Ability to work both independently and as part of a team.
• Familiarity with quality control processes and standards.

Working Conditions:

• Must be able to handle high temperature environment (short term) and combustible raw materials.
• Require standing for substantive periods and working with hands in close spaces.
• Require wearing some PPE/ other protective gear and following safety protocols.