Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Responsibilities

Prepare project management plan and its sub-plans, such as: work scope statement, schedule plan, manpower plan, tools and equipment plan, procurement plan and OHSE plan

• Provide engineering support in project or plant maintenance • Coordinate internal and external audit review

• Engineering calculations associated with current carrying capacity of cables, wires, fuses and other circuit protective devices.

• Procedures for inspection, testing and certification of electrical fixed installations.

• Industrial hazards, safety and health precautions, and environmental concerns.

• Installation practice and regulations, and relevant codes of practice.

Requirements & Professional Skills•

Min. Diploma in Electrical Engineering or equivalent

Min. 0-1 year of relevant experience in electrical work

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform corrosion monitoring inspection and coordination with NDT team
3. Submit daily and weekly reports to client on the inspection findings.
4. Perform QA/QC welding inspections at site.
5. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc
6. Provide Lead auditor services for various clients at various manufacturing companies.
7. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have Diploma or bachelor degree in engineering
2. Must have valid API 510, API 570 and API 653 Certificate.
3. Must have Welding inspector certificate under AWS-CWI or CSWIP 3.1
4. Must have NDT level II certificates in MPI, PT, UT and RT
5. Must have IRCA QMS lead auditor certification.
6. Must be a Saudi Aramco and Singapore welding society approved welding inspector
7. Must have more than 5 years’ work experience in Shell Bukom.
8. Knowledge in code book like AWS, ASME, API codes
9. Must have a good knowledge about MT,PT,UT,RT Methods.
10. Must having an inspection experience in Exchanger,pressure vessels, Pumps, compressors, valves, well head equipment’s, Tanks and Piping.

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

ACMV Design/Site Engineer - Job Description

1. System Design: Create and optimise air-conditioning and mechanical ventilation systems, including load calculations and equipment selection.

2. Site Supervision: Oversee the installation, testing, and commissioning of ACMV systems on-site to ensure they meet design specifications and quality standards.

3. Technical Support: Provide on-site troubleshooting and technical guidance during construction, resolving any issues related to HVAC systems.

4. Regulatory Compliance: Ensure all designs and installations adhere to local and international codes and standards (e.g., ASHRAE,Green Mark).

5. Project Coordination: Collaborate with architects, contractors, and other stakeholders to ensure seamless integration of ACMV systems into the overall building design.

6. Client Communication: Interface with clients to address their needs, provide updates, and ensure satisfaction throughout the project lifecycle.

7. Minimum Requirements: Bachelor's degree in Mechanical Engineering, 3-5 years of experience in HVAC design and site supervision, proficiency in design and project management tools, and strong problem-solving skills.

ACMV Engineer Minimum Requirements

1. Education: Bachelor’s degree in Mechanical Engineering or related field; a diploma with extensive experience may be considered.

2. Professional Accreditation: Registration with the Professional Engineers Board (PEB) Singapore; Green Mark Accredited Professional (GMAP) is advantageous.

3. Experience: 3-5 years of relevant experience in HVAC or ACMV design, preferably within Singapore.

4. Technical Skills: Proficiency in HVAC design software (e.g., AutoCAD, Revit MEP); strong understanding of Singapore's SS 553, SS 530, and SS 531 standards.

5. Regulatory Compliance: Knowledge of local building codes, fire safety regulations, and BCA standards, including Green Mark Certification requirements.

6. Soft Skills: Strong communication, problem-solving, and project management abilities.

7. Continuing Education: Commitment to Continuous Professional Development (CPD) as required by professional bodies like IES or PEB.

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Basic Responsibilities:

Ø Conduct research on Atomic Layer Deposition technology for perovskite solar cells

Ø Effectively execute related experimental arrangements.

Ø Participate in maintaining laboratory equipment.

Ø Design, execute, and analyze experiments, and submit reports and analyses as required.

Ø Strong written and verbal communication skills.

Ø Other responsibilities, and job description subject to change at any time.

Education/Experience:

Bachelor's or master's degree in engineering or a similar technical discipline, majoring in materials, chemistry, physics, electronics, or a similar field.

Required Skills/Competencies:

Ø Experience with ALD process is preferred.

Ø Some experience working in a chemical/material/semiconductor laboratory.

Ø Basic understanding of materials science, semiconductor device physics, and chemistry.

Ø Ability to handle complex data, analyze, and communicate results effectively.

Ø Ability to coordinate activities between various engineering and operations teams. Good verbal and written communication skills.

Responsibilities:

• Develop/update hull material, architectural outfitting specifications and weight and centre gravity (W&CG) study.

• Coordinate/execute contract specification requirements and production inputs into engineering drawing/document.

• Prepare bill of material, review and selection of materials.

• Provide progress reporting and schedule management of engineering deliverables.

• Perform site visits to rectify engineering issues, determine existing conditions or verify new construction.

• Coordinate work and integration with other engineering disciplines, production, QA/QC and clients.

• Meet with vendors, client reps, accreditation representatives when required.

• Perform any other tasks as may be assigned by the supervisor.

Requirements:

• Minimum 5 years working experience in a marine/offshore industry either with shipyards or marine equipment manufacturers.

• Minimum Diploma or Bachelor's Degree in Structural Engineering or Marine Engineering.

• Ability to understand and perform structural analysis of the hull and structures, knowledge of Intergraph-SmartMarine 3D Software will be advantageous.

• Familiar with Marine & Offshore rules, regulations and requirements.

Job Responsibilities

· Create firmware specifications based on design rules, internal processes, and product/system requirements.

· Specify, design and develop signal processing algorithms, write codes for mircocontrollers in new and customized industrial sensors and HMI products

· Create and conduct review on test methodologies, validate design performance to specifications, debug embedded software, and document final design.

· Support production implementation in the embedded software perspective

· Collaborate with cross functional teams to sustain product lifecycle including customer complaints, failure analysis, etc.

· Liaising with Headquarter on the technical support and technology transfer.

· Verify regulatory compliance with support from head office.

Job Requirements

· Master / Bachelor in Electronic / Computer Engineering or equivalent.

· Minimum 3 years relevant experience in embedded software design and development.

· Strong knowledge and direct experience with C & C++ programming languages.

· Strong knowledge on digital electronics hardware including I2C, SPI, UART, PWM, ADC, USB, etc.

· Experience in designing, coding, debugging and validating on ARM Cortex microcontrollers are preferred.

· Knowledge on Python & Matlab would be advantage.

· Logical and strong interpersonal with analytical skills, strong team player and independent.

· Creative, self-driven and willing to acquire new skills and grow himself/herself.

Responsibilities:

• Report directly to Mechancial Department Head in all matters
• Supporting Engineers and Senior Engineers in day to day operation
• Supervise and ensure safety of vessel maintenance and repair works.
• Leading a team of Technician to perform repair and maintenance onboard ships
• Carry out troubleshooting and rectification of mechanical/diesel defects.
• Perform joint inspection and acceptance with ship representative
• Hands on work in rectification of defects and maintenance of mechanical components
• Ensure quality of work performed by ownself and technician deployed
• Assist in logistic support, lifting of equipment and workshop equipments etc

Requirements:

• Diploma in Mechanical / Marine Engineering
• Able to use IMTE Tools such as Torque Wrench, Pressure gauges, Internal and External Micrometer
• Able to work under pressure
• Able to work in a team
• Able to perform hands on work
• Able to work in shipyard environment – heat, grease, dust
• Proficiency in Microsoft Word, Excel
• Only Singapore Citizens will be considered for this role

Other Information:

• Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Job Description

• Prepare and submit MSRA prior to the commencement of work
• Liaise with SO team to clear off inspection
• Lead the site supervisor in clearing off site inspection, and to check and ensure that the work is carried out safely as per drawing, and is of good quality
• Coordinate with subcontractor to resolve the issues and to ensure that the work is carried out as per approved MSRA & design, and to meet the schedules
• Check and ensure all the temporary work is carried out as per PE design

Requirements

• Degree in Civil Engineering or equivalent
• Min 2 to 3 Years Relevant Work Experience (C&S RC / building work)
• Proficient in English writing and speaking
• Microsoft application (words, excel, ppt etc)

We are looking for Senior Plant & Machinery (Mechanical / Electrical) Engineers for:

Metal Shredder & non–ferrous separation / Metal Shear Plant

Waste Wood-To-Energy Plant

Responsibilities:

• Responsible for ensuring highest possible production and uptime in the scrap processing or WTE plant.
• Responsible for plant production and reliability / perform root cause investigations to increase reliability and general performance of machinery & equipment.
• Target for incident free and reliable operations, including timely and proper maintenance of systems.
• Responsible for implementing Maintenance Excellence by aligning with Best Practices.
• Ensure that preventive maintenance activities are proactively planned, prepared and scheduled with the required level of equipment reliability.
• Liaison with production team and other stakeholders; manage on-going maintenance activities.
• Ensure plant & machinery documentation and Preventive Maintenance (PM) procedures are constantly updated.
• Ensure technical, environmental and safety aspects in all matters are in compliance with the HSE regulations.

Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree, Engineering (Mechanical/Electrical) or equivalent.
• Required language(s): English & dialect (in order to communicate with dialect-speaking production team and other stakeholders to stay updated on the on-going operations & maintenance activities.)
• At least 2 Year(s) of working experience in the related field is required for this position.
• Required knowledge: hydraulic system, rotating parts, PLC systems, conveyor belts.
• Preferably Executive specialized in Engineering - Mechanical or equivalent.
• Required to work 5.5 days.

Resposibilities:

• Receive customer enquiries through customer portal or email.
• Download, update, and monitor customer product Bill of Material (BOM), drawings, and specifications and its revisions.
• Prepare Sales quotation/proposal/tender documents during RFQ/quotation stage.
• Check and ensure compliance to all specifications prior to providing customer the proposal.
• Calculate material, machining, cladding and other associated costs to quotations.
• Ensure quotations submitted are competitive and maintain a good profit margin.
• Follow-up on proposals with clients to secure orders.
• Prepare and distribute a Sales Order Job Launch when customer awards Purchase orders.
• Project Management on active Sales Orders and delivery schedules.
• Manage and build customer relationships and improve customer satisfaction.
• Coordinate with other departments to compile and submit documentations as required (e.g. pre-production/ final product documentations, concessions/non-conformances)
• Establish positive communications with customers regularly.

Requirements:

• Diploma/Bachelor’s Degree in Mechanical Engineering or related
• Highly motivated and driven
• Strong interpersonal and communication skills
• Team player
• Analytical, resourceful, and possess problem-solving capabilities
• Willing to undertake ad-hoc project assignments and be able to multi-task
• Proficient with MS Office tools
• Knowledge/interest in oilfield components and equipment will be an added advantage

What's in it for you?

• Bespoke training and development programs
• Fun & open working culture
• Staff parties and company events
• Recreation room - pool table, karaoke system, board games, gaming consoles
• On-site gym facilities
• Accessibility (2-mins walk from MRT)

Engineer for the product development of door hardware products. (i.e. door closers and floor springs)

An experienced professional responsible for leading and executing entire product development cycles, from new concept design generation, concept and feasibility evaluation, detailed design to prototyping and testing until series production.

Job Responsibilities

• Product development for dormakaba’s surface-mounted and concealed door closers and floor springs.
• Develops and manages new product designs in accordance with project requirements, while adhering to project milestones and schedule.
• Conduct feasibility studies, FMEA, cost analysis and material selection to support design decisions.
• Collaborate closely manufacturers, and suppliers to address technical challenges through DFM & DFA and ensure successful implementation of designs.
• Prepare and present design proposals, progress reports, and project updates to stakeholders, while abiding to timely delivery within project’s budget.
• Utilizes SolidWorks software to generate detailed 3D models and technical drawings for prototypes and production.
• Setup test plans using DOE methodology, analyze test results and iterate design to meet performance and quality standards.
• Participate in team design reviews, providing constructive feedback and contributing to continuous improvement initiatives.
• Collaborate with cross-functional teams, such as manufacturing, quality assurance, and marketing.

Job Requirements

• Bachelor’s Degree in Mechanical/Material Engineering is required.
• Min 3 years’ design experience in a product development environment, contributing to a product’s successful delivery into series production will be preferred.
• Experienced in designing springs, custom gears (e.g. rack and pinion, worm drives), cam drives, bearings and hydraulic systems.
• Skilled in material selection for steel and aluminum, with expertise in manufacturing processes, including machining, cast iron / aluminum casting, metal forming and heat treatment.
• Knowledge in theoretical calculations related to the field of statics, dynamics and kinematics.

Full Time

Location: Jurong

DUTIES AND RESPONSIBILITIES

1. Develop, implement and maintain quality management systems based on ISO standards.

2. Oversee the day-to-day quality control operations, ensuring compliance with established standards and procedures.

3. Providing guidance, training, and support to ensure consistent quality outcomes to quality control inspectors and technicians

4. Conduct regular audits and inspections to identify areas for improvement, non-conformities, and opportunities for enhancing quality processes.

5. Collaborate with production, engineering, and other departments to establish and enforce quality standards at all stages of the product lifecycle.

6. Enhance the development and execution of quality control plans, including sampling techniques, testing methodologies, and documentation procedures.

7. Manage the documentation of quality control activities, including inspection reports, test results, and corrective action plans.

8. Monitor and analyse quality metrics to track performance and identify trends, presenting findings to management and suggesting improvement strategies.

9. Stay up-to-date with the latest developments in ISO and OCO certifications, as well as industry best practices, and incorporate them into the quality management system.

10. Co-ordinate ISO audits by external certification bodies, ensuring all necessary documentation is in place and readily accessible.

Qualifications and experience:

· Bachelor's degree in a relevant field (Quality Management, Material Engineering, Manufacturing, etc.); advanced degree or certifications are a plus.

· Minimum of 3 years of experience in quality control, with a focus on ISO certifications.

· Strong understanding of ISO 9001 Standards, with the ability to interpret and implement their requirements effectively.

· Knowledge on Component FAI / PPAP / PSW from supplier are a plus

· Must be able to write and communicate in Mandarin and English as the position requires liaison and communication with China counterparts on equipment and material matters

· Proven experience in managing quality control teams, driving continuous improvement initiatives, and fostering a culture of quality excellence.

· Proficiency in quality control methodologies, statistical analysis, and root cause analysis techniques.

· Excellent communication skills, both written and verbal, with the ability to present complex technical information to diverse audiences.

· Detail-oriented mindset with exceptional organizational and problem-solving abilities.

· Familiarity with quality management software and tools.

· Strong leadership skills and the ability to collaborate effectively across departments.

Personal Qualities:

· Proactive, driven and resilient

· Able to work independently and as part of cross-cultural team

· Meticulous, accurate and attention to detail

Job Description

Bring more to life.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At Leica Microsystems, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

Shape the Future with Us!

At Leica Microsystems, we have been shaping the future for over 175 years with groundbreaking optical and digital solutions. With a culture rooted in customer focus, innovation, and teamwork, we lead the market in microscopy, imaging, and analysis, unveiling the invisible and empowering our customers to build a better, healthier world.

Joining Leica Microsystems means contributing to scientific discoveries and supporting surgeons in making critical decisions. Our advanced microscopes and AI-based image analysis solutions enable users to gain profound insights into development and engineering challenges. Here, you will work on meaningful projects alongside passionate colleagues, driving progress and pushing the boundaries of what’s possible.

Learn about the Danaher Business System which makes everything possible.

The Senior Quality Engineer, PQE is responsible to ensure the quality of both medical and non-medical products through rigorous inspections, implementation of quality control measures, and identification of areas for improvement. You will address production quality issues, collaborate with cross-functional teams to find root causes, and drive continuous improvement to build high-quality products that exceed customer expectations. The ideal candidate will possess a strong background in engineering or quality assurance, attention to detail, a proactive mindset, and preferably experience in people management.

This position reports to the Senior Manager Quality Assurance and is part of the Production Quality Engineering (PQE) team located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Address production quality issues by identifying problems and collaborating with cross-functional teams to develop solutions for overall product quality improvement.
• Utilize statistical tools to identify trends and patterns for enhancing the production process and ensuring quality.
• Investigate and correct root causes of product failures occurring in the field.
• Conduct periodic production audits to ensure compliance with established policies, procedures, and control plans.
• Participate in lean and continuous improvement initiatives, while adhering to company EHS requirements to prevent injuries and maintain safety.

The essential requirements of the job include:

• Bachelor's degree in Mechatronics, Mechanical Engineering, or Electronics.
• At least 5 years of relevant experience in biomedical or medical device manufacturing.
• Proficient in statistical control methods and QMS 9001; familiarity with ISO13485, USFDA QSR/cGMP, and ISO14971 for medical devices is advantageous.
• Computer literate in MS Office and Lotus Notes.
• Strong analytical, problem-solving skills, and knowledge of lean and investigation tools such as 8D and fishbone diagrams, with a solid understanding of engineering principles, theories, and concepts.

Leica Microsystems, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job.

Responsibilities:

• Develops and maintains systems using Java, Spring Boot, Angular, Oracle SQL, Power Automate, Power Apps, and Power BI.
• Provides technical support to users.
• Troubleshoots and resolves system issues.
• Participates in business analysis and technical design sessions.
• Ensures compliance with industry regulations.
• Documents system processes and presents progress reports.
• Collaborates with team members and other departments to ensure smooth operations.
• Manages projects as assigned.
• Coaches and mentors team members (for senior positions).

Requirements:

• Minimum of a Bachelor's degree in Computer Science, Information Technology, or a related field (advanced degrees preferred).
• Possesses at least 5 years of experience in system development and support.
• Demonstrates strong technical skills in Java, Spring Boot, Angular, Oracle SQL, Power Automate, Power Apps, and Power BI.
• Exhibits excellent analytical and problem-solving abilities.
• Displays strong communication and interpersonal skills.
• Capable of managing multiple projects and deliverables simultaneously.
• Experienced in one or more full Software Development Life Cycles (SDLCs) for enterprise projects.
• Knowledge of SAP Crystal Reports and Jasper Reports is an added advantage.

Our Addresses and Working Hours:

Seatrium - Pioneer Yard

50 Gul Road, Singapore 629353

(Islandwide transport provided)

Mon – Thurs: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

The Field Service Engineer is responsible for providing technical expertise and support at customer sites. This role involves installing, maintaining, troubleshooting, and repairing equipment and systems to ensure optimal performance and customer satisfaction.

Key Responsibilities:

Installation & Commissioning

· Perform installation, setup, and commissioning of maritime equipment and systems onboard vessels or at customer facilities.

· Conduct functional testing and calibration to ensure systems meet operational requirements.

Maintenance & Troubleshooting

· Diagnose and resolve technical issues on mechanical, electrical, and control systems.

· Conduct scheduled and preventive maintenance to minimize equipment downtime.

· Prepare detailed service reports and recommend corrective actions.

Customer Support

· Provide technical advice and training to customers to ensure proper system operation.

· Act as the primary point of contact for technical support during and after project completion.

Compliance & Documentation

· Ensure all work complies with industry standards, safety regulations, and company policies.

· Maintain accurate service records, inspection reports, and parts inventory.

Collaboration

· Liaise with internal teams (sales, engineering, and procurement) to ensure seamless service delivery.

· Provide feedback to improve product design, reliability, and customer experience.

Department: R&D

Report to: R&D Director

Xnergy is a multi-VC funded and Sovereign-backed power solutions Pre-IPO company, the first in the world in high power universal contactless charging for global electrified mobility. Xnergy was voted a APAC 25 company in 2020 by Cleantech Group.

* The APAC 25 is an annual list of private sustainable innovation companies that have gained the attention of market experts. The 25 companies are regarded as having the potential to make a significant impact in a five-to-ten-year time frame.

Xnergy has a subsidiary company in Suzhou and an office in Boston and Munich. For more information, please visit Xnergy website: www.xnergytech.com.

Description

We are looking for a senior Firmware Engineer with experience in power electronics to join us in Singapore, with opportunities to travel overseas.

In this role, you will be responsible for the design, development and testing of the firmware and embedded control algorithm for Xnergy wireless power and power conversion products. This includes various stages in a product’s life cycle such as concept/ architecture, prototyping, evaluation, production ready firmware, manufacturing, and maintenance.

You will work closely with the R&D team (hardware, firmware, and software engineers) to contribute to power converter design and shape the development of our future product strategies.

You are expected to provide theoretical knowledge and hands on skill in power electronics control and algorithm, firmware architecture, microcontrollers, power management strategies.

Essential Functions/Responsibilities

1. Design and implement control algorithms and embedded firmware for high-power converters based on DSP/MCU using C/C++ programming language and model-based design methodology in line with the applied normative and standards practice.
2. Apply knowledge of CAN, SPI, USB, I2C, RS485, RS232 communication protocols to product development.
3. Plan and execute testing strategy including bench testing, validation testing, unit testing, integration testing, and system level testing.
4. Develop lab test tools, and support development of routine testing methods/systems for production systems.
5. Produce clear documentation for firmware design and test results.
6. Support identification and troubleshooting of discovered field issues, customisation requirements, create solutions, and disseminate knowledge.
7. Contribute to all phases of the firmware development life cycle including requirements analysis, architecture, design, implementation, testing, and release to ensure high quality production code.
8. Work closely with R&D team, field applications, and production teams for specifications, design, prototyping, and fabrication locally and remotely.
9. Contribute in selecting microcontrollers, schematics review, power management strategy, testing, debugging, and troubleshooting of power, digital, and analog circuit.
10. Finding root-cause and solve technical issues during new product development and product improvement as well as in field escalations.
11. Provide technical guidance and support to the software team.
12. Contribute in related technology roadmaps, features development, next generation product.
13. Plan and schedule to meet goals, deliverables, and deadlines.
14. Mentor junior engineers with an emphasis on controls.

Requirements

1. Bachelor’s/Master’s/PhD degree in Electrical/Electronic/Power Electronics Engineering or Computer Science or other related field.
2. Possess minimum 3 years of relevant work experience.
3. Good understanding and strong interests in power electronics, control and stability, topologies (e.g., AC/DC, PFC, DC/DC, DC/AC, LLC and resonant converter), analog/digital circuit.
4. Solid experience with embedded software development, firmware design, real time control and implementation in microcontrollers, DSPs.
5. Good programming skills (C/C++/assembly, python) and familiar with various development platform (microcontrollers, Linux, etc.) and development tools (compilers and debuggers).
6. Strong knowledge in various industrial communication protocol and the implementation (UART, USB, SPI, I2C, RS-485, CAN, CAN-FD, ISO-15118, IEC 61851).
7. Strong practical knowledge on schematics, engineering specs, testing, troubleshooting, debugging, including familiarity with equipment (oscilloscopes, multi-meters, power supplies, etc.).
8. Familiar with good development practices including design and code reviews, testing and regression, revision control, release, and user documentation.
9. Experience with Agile development methods such as Kanban or Scrum.
10. Self-driven, proactive, assertive, organised, disciplined, and able to work in a collaborative, fast-paced, team environment.
11. Good interpersonal skills, analytical skills, written and verbal communication skills in English and Chinese language.
12. Able to work in start-up environment with global, cross-cultural, and cross-functional engagements.

io-consultants is looking to expand its activities in Asia and is searching for Senior Consultants / Principal Consultants for projects to be based in Singapore. The candidate must be a team player, full of drive, articulate, creative and have a can-do attitude.

Responsibilities:

• Industrial engineering and automation consultancy services

• Understanding Clients’ requirements, perform data gathering, data analysis

• Research and develop new processes, operations and logistics concepts and ideas

• Work with Clients on Production and/or Logistics process re-engineering and design

• Perform process and equipment layout design work

• Prepare Systems & Equipment budget, specification, evaluation and selection

• Work with Systems & Equipment Suppliers and other Consultants in project implementation

• Manage given projects within agreed budget and schedules

• Project administration and reporting

• Lead, guide, train and motivate younger consultants

Requirements:

• Good recognised degree in Engineering. Graduate Degree would be a plus

• Good working knowledge in MS-Office (Word, Excel and PowerPoint)

• Very good spoken and written English, communications and presentation skills. Have a lot of self-confidence

• 10 or more years’ working experience, preferably in the any of the following industries: Food & Catering, Healthcare, Pharmaceutical, Logistics and Facility Planning. Consulting experience would be a plus.

• Ability to work in team and/or independently

• Able to travel for short assignments

• Must have initiative and self-learning

• Ability to lead projects and produce quality results

Remuneration:

• Can be discussed, depending on experience, know-how and ability to contribute

• Range (dependent on experience and qualifications): $10,000 - 14,000

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development services providing customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and products through intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutions comprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com.

RESPONSIBILITIES

• Ensure the development of new products and the assurance of current products that are robust, reliable, top quality, with delightful customer experience in product usage.
• Define, develop, and contribute to innovation projects, including:
  • New product development
  • Introduce or evolve product test methods
  • Conduct field studies and experiments
  • Develop and prove the hypothesis with correlation studies/experiments
  • Process digitalization and automation
  • Data analytics and visualization
• Provide training to MPa or test partners to facilitate PQC (Pre-Qual check), SNV (Safety net validation), and System testing, as well as technical support if needed.
• Requirements of analysis; test planning, execution (functional & integration test for both apps and software), and reporting.
• A validation system was developed to assess the design holistically through the customers' lens.
• Conduct gamma testing on products nearing release, following defined test plans and scenarios.
• Collaborate with cross-functional teams, including developers, product managers, and quality assurance teams, to ensure issues are understood and resolved effectively.
• Other duties that may be determined by Management.

• Degree in Mechanical, Mechatronics, Electrical/Electronics, Computing, or any field of Engineering with programming/scripting skills.
• Minimum of 3 years of experience in reliability testing or a related role.
• Strong knowledge of electrical systems, components, and testing methodologies.
• Experience with electrical test equipment and instrumentation.
• Proficiency in data analysis and statistical tools.
• Excellent problem-solving and analytical skills.
• Strong communication and interpersonal skills.
• Ability to work independently and as part of a team.

Purpose: To lead in the management of supplier’s quality performance and technical specification compliance to better meet the company’s business goal and requirements (Quality, Logistics, Technology, Cost, Service).

Key Area of Responsibilities:

• Review and approve First Article (FA) Report for product qualification
• Review and approve Supplier Change requests through the Supplier Change Request and Waiver Report submitted by the supplier to manage Change Control (Copy Exact requirement).
• Conduct part buy-off at the supplier site per customer/VDL requirements to ensure compliance before the part is delivered to VDL site.
• Review the Material Review Board (MRB) list to make a disposition on non-conforming parts and take follow-up action (for supplier-related issues).
• Review, approve, and validate actions in the Supplier Non-Conformance Report (NCR)/Corrective Action and Preventive Action (CAPA) Report to ensure the root cause is identified to actions done to eliminate the issue and prevent re-occurrence.
• Review, approve and validate actions in the Supplier 8D Report to identify the root cause and eliminate the issue to prevent re-occurrence.
• Conduct Quality Management System /Technical / Process Audit to qualify; periodic assessment to mitigate risk to Customer and VDL.
• Provide support on the Supplier Quarterly Business Review (QBR) process (Quality-related actions, indices, and feedback) to ensure alignment between critical suppliers and VDL to meet VDL requirements/targets.
• Engage in Continuous Improvement Projects (CIP) with suppliers to improve Quality and prevent Quality issues.
• Review overall supplier Quality status during Weekly Supplier Quality Department meetings to control supplier Quality and mitigate concerns.
• Present updates on Supplier performance to management and the customer focus team at the Customer Performance Forum.
• Provide support on New Product Introduction (NPI) meetings (Supplier Quality-related) to understand customer requirements and translate them to related suppliers.
• Support and participate in the company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Mechatronics or other relevant qualification.
• Minimum 3 years of experience as a supplier quality engineer in the manufacturing industry.
• Certified Quality Engineer preferred
• Team player
• Good problem-solving skills
• Meticulous in details
• Proficient in advanced Microsoft Excel functions
• Good communication skills

Job Description:

• Inspection of project sites
• Coordinate, manage, and supervise all the instrument installation and monitoring works
• Liaise and coordinate with contractor for installation and monitoring issues
• Attending site progress meetings, preparing meeting minutes and coordinating with clients
• Process and interpret monitoring readings
• Coordinate with the construction team to minimise obstruction and damage to the monitoring instruments
• Supervise and quality control in instrumentation works
• Other ad hoc duties as assigned

Requirements

• Relevant education background in Civil Engineering / Geotechnical / Geology
• Min 3 years of working experience in instrumentation and monitoring works
• Experience in LTA projects
• Senior position will be considered with relevant experience
• Only Singaporeans

You may send your resume / CV to email address directly:

[email protected]